Skip to contentSkip to conversation

trivial: Fix booot occurences

PATCH New Michal Simek 3 participants 3 messages Jun 5, 2020 – Jun 15, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 trivial: Fix booot occurences

s/booot/boot/g

The first ase is booot instead of boot and second u-booot instead of u-boot.

---

 board/freescale/p1010rdb/README.P1010RDB-PA | 2 +-
 cmd/mmc.c                                   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
board/freescale/p1010rdb/README.P1010RDB-PA +1 -1
index 46c61237c727..0cb950d845e7 100644
@@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
 Setting of hwconfig
 ===================
 If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
+"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
 setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
 By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
 is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
cmd/mmc.c +1 -1
index 97e5d91859c9..1c252e050282 100644
@@ -1004,7 +1004,7 @@ U_BOOT_CMD(
 	"mmc part - lists available partition on current mmc device\n"
 	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
 	"mmc list - lists available devices\n"
-	"mmc wp - power on write protect booot partitions\n"
+	"mmc wp - power on write protect boot partitions\n"
 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
 	"mmc hwpartition [args...] - does hardware partitioning\n"
 	"  arguments (sizes in 512-byte blocks):\n"
Signature · 1 line
2.27.0
#1 lore raw

PATCH 1/1 trivial: Fix booot occurences

Quoted 6 lines · Michal Simek

s/booot/boot/g

The first ase is booot instead of boot and second u-booot instead of u-boot.

Quoted 33 lines

---

 board/freescale/p1010rdb/README.P1010RDB-PA | 2 +-
 cmd/mmc.c                                   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
board/freescale/p1010rdb/README.P1010RDB-PA +1 -1
index 46c61237c727..0cb950d845e7 100644
@@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
 Setting of hwconfig
 ===================
 If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
+"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
 setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
 By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
 is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
cmd/mmc.c +1 -1
index 97e5d91859c9..1c252e050282 100644
@@ -1004,7 +1004,7 @@ U_BOOT_CMD(
 	"mmc part - lists available partition on current mmc device\n"
 	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
 	"mmc list - lists available devices\n"
-	"mmc wp - power on write protect booot partitions\n"
+	"mmc wp - power on write protect boot partitions\n"
 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
 	"mmc hwpartition [args...] - does hardware partitioning\n"
 	"  arguments (sizes in 512-byte blocks):\n"
#2 lore raw

PATCH 1/1 trivial: Fix booot occurences

In reply to Michal Simek
Quoted 7 lines · Michal Simek

s/booot/boot/g

The first ase is booot instead of boot and second u-booot instead of u-boot.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200615/10f618ed/attachment.sig>