nvmem: sc27xx: add sc2730 efuse support
Subsystems (2)
Chunyan Zhang
reviewerPATCH v2 1/1 nvmem: sc27xx: add sc2730 efuse support
From: Freeman Liu <[email protected]>
Add support to the new efuse IP which is integrated in the SC2730 which includes multiple blocks in a single chip.
Signed-off-by Freeman Liu <[email protected]>
Signed-off-by Chunyan Zhang <[email protected]>
Reviewed-by Baolin Wang <[email protected]>
---
Changes from v1:
* Addressed comments from Srinivas;
* Added reviewed-by from Baolin.
--- drivers/nvmem/sc27xx-efuse.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
drivers/nvmem/sc27xx-efuse.c +24 -3
@@ -4,12 +4,14 @@#include <linux/hwspinlock.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/nvmem-provider.h> /* PMIC global registers definition */ #define SC27XX_MODULE_EN 0xc08 +#define SC2730_MODULE_EN 0x1808#define SC27XX_EFUSE_EN BIT(6)/* Efuse controller registers definition */
@@ -49,12 +51,29 @@#define SC27XX_EFUSE_POLL_TIMEOUT 3000000#define SC27XX_EFUSE_POLL_DELAY_US 10000 +/* +* Since different PMICs of SC27xx series can have different +* address , we should save address in the device data structure. +*/ +struct sc27xx_efuse_variant_data { +u32 module_en; +}; +struct sc27xx_efuse {struct device *dev;struct regmap *regmap;struct hwspinlock *hwlock;struct mutex mutex;u32 base; +const struct sc27xx_efuse_variant_data *var_data; +}; + +static const struct sc27xx_efuse_variant_data sc2731_edata = { + .module_en =SC27XX_MODULE_EN , +}; + +static const struct sc27xx_efuse_variant_data sc2730_edata = { + .module_en =SC2730_MODULE_EN , };/*
@@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)return ret;/* Enable the efuse controller. */ - ret =regmap_update_bits (efuse->regmap,SC27XX_MODULE_EN , + ret =regmap_update_bits (efuse->regmap, efuse->var_data->module_en,SC27XX_EFUSE_EN ,SC27XX_EFUSE_EN );if (ret) goto unlock_efuse;
@@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes) disable_efuse:/* Disable the efuse controller after reading. */ -regmap_update_bits (efuse->regmap,SC27XX_MODULE_EN ,SC27XX_EFUSE_EN ,0 ); +regmap_update_bits (efuse->regmap, efuse->var_data->module_en,SC27XX_EFUSE_EN ,0 ); unlock_efuse:sc27xx_efuse_unlock (efuse);
@@ -219,6 +238,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)mutex_init (&efuse->mutex); efuse->dev = &pdev->dev; + efuse->var_data =of_device_get_match_data (&pdev->dev); econfig.stride =1 ; econfig.word_size =1 ;
@@ -238,7 +258,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev) }static const struct of_device_id sc27xx_efuse_of_match[] = { - { .compatible ="sprd,sc2731-efuse" }, + { .compatible ="sprd,sc2731-efuse" , .data = &sc2731_edata}, + { .compatible ="sprd,sc2730-efuse" , .data = &sc2730_edata}, { } };
Signature · 1 line
2.20.1
Quoted 8 lines · Chunyan Zhang
From: Freeman Liu <[email protected]>
Add support to the new efuse IP which is integrated in the SC2730 which includes multiple blocks in a single chip.
Signed-off-by Freeman Liu <[email protected]>Signed-off-by Chunyan Zhang <[email protected]>Reviewed-by Baolin Wang <[email protected]>
Applied thanks,
-srini
Quoted 94 lines
---
Changes from v1:
* Addressed comments from Srinivas;
* Added reviewed-by from Baolin.--- drivers/nvmem/sc27xx-efuse.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)drivers/nvmem/sc27xx-efuse.c +24
-3@@ -4,12 +4,14 @@#include <linux/hwspinlock.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/nvmem-provider.h> /* PMIC global registers definition */ #define SC27XX_MODULE_EN 0xc08 +#define SC2730_MODULE_EN 0x1808#define SC27XX_EFUSE_EN BIT(6)/* Efuse controller registers definition */ @@ -49,12 +51,29 @@#define SC27XX_EFUSE_POLL_TIMEOUT 3000000#define SC27XX_EFUSE_POLL_DELAY_US 10000 +/* +* Since different PMICs of SC27xx series can have different +* address , we should save address in the device data structure. +*/ +struct sc27xx_efuse_variant_data { +u32 module_en; +}; +struct sc27xx_efuse {struct device *dev;struct regmap *regmap;struct hwspinlock *hwlock;struct mutex mutex;u32 base; +const struct sc27xx_efuse_variant_data *var_data; +}; + +static const struct sc27xx_efuse_variant_data sc2731_edata = { + .module_en =SC27XX_MODULE_EN , +}; + +static const struct sc27xx_efuse_variant_data sc2730_edata = { + .module_en =SC2730_MODULE_EN , };/* @@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)return ret;/* Enable the efuse controller. */ - ret =regmap_update_bits (efuse->regmap,SC27XX_MODULE_EN , + ret =regmap_update_bits (efuse->regmap, efuse->var_data->module_en,SC27XX_EFUSE_EN ,SC27XX_EFUSE_EN );if (ret) goto unlock_efuse;@@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes) disable_efuse:/* Disable the efuse controller after reading. */ -regmap_update_bits (efuse->regmap,SC27XX_MODULE_EN ,SC27XX_EFUSE_EN ,0 ); +regmap_update_bits (efuse->regmap, efuse->var_data->module_en,SC27XX_EFUSE_EN ,0 ); unlock_efuse:sc27xx_efuse_unlock (efuse);@@ -219,6 +238,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)mutex_init (&efuse->mutex); efuse->dev = &pdev->dev; + efuse->var_data =of_device_get_match_data (&pdev->dev); econfig.stride =1 ; econfig.word_size =1 ;@@ -238,7 +258,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev) }static const struct of_device_id sc27xx_efuse_of_match[] = { - { .compatible ="sprd,sc2731-efuse" }, + { .compatible ="sprd,sc2731-efuse" , .data = &sc2731_edata}, + { .compatible ="sprd,sc2730-efuse" , .data = &sc2730_edata}, { } };