Skip to contentSkip to conversation

arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2

PATCH In review Adam Ford 3 participants 3 messages May 26, 2020 – Jun 18, 2020

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2

LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V.

This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix.

Fixes 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +2 -2
index fb0137a8611c..94911b1707ef 100644
@@ -136,7 +136,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -144,7 +144,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
Signature · 1 line
2.17.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 10 lines · Adam Ford

LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V.

This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix.

Fixes 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")

No need for a new line between fixes and signed-off-by.

With that:

#2 lore raw
Quoted 5 lines · Daniel Baluta
Quoted 4 lines · Adam Ford

LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V.

Quoted 7 lines
Quoted 6 lines

This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix.

Fixes 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")

No need for a new line between fixes and signed-off-by.

I fixed it up and applied the patch.

Quoted 4 lines

With that:

Thanks.

Shawn