Skip to contentSkip to conversation

cmd: env: add option for quiet output on env info

PATCH RESEND New Patrick Delaunay 3 participants 15 messages Jun 19, 2020 – Jul 27, 2020

lore
Share & tools
lore
#0 lore raw

v5 cover cmd: env: add option for quiet output on env info

Hi,

It is a V5 for [1] serie.

RESEND without "stm32mp1: use the command env info -q in env_check" sent in separate serie [4].

I add the -q option for 'env info' command and I also add pytest for this command.

Test for ENV_IS_IN_DEVICE is included in separate serie [2] (I will activate ENV_IS_IN_EXT4 support in sandbox)

To avoid compilation warning, I add prototype for env_get_location for the patch 3/7
"cmd: env: check real location for env info command" as it is done in [3].

[1] http://patchwork.ozlabs.org/project/uboot/list/?series=183438
[2] http://patchwork.ozlabs.org/project/uboot/list/?series=158160
[3] http://patchwork.ozlabs.org/patch/1230200/
[4] http://patchwork.ozlabs.org/project/uboot/list/?series=183450

Changes in v5:
- allow to execute cmd_nvedit_info on real board
- rename test_env_info_quiet to test_env_info_sandbox

Changes in v4:
- rebase on master branch
- move 5/7 stm32mp1: configs: activate CMD_ERASEENV in a new serie 183380
- move 2/7 and 4/7 in a new serie 183387

Changes in v3:
- update commit message (sub-commandi)
- rename test_env_info_test to test_env_info_quiet

Changes in v2:
- update prototype in env_internal.h as done in "env: add prototypes for weak function"
- remove comment change in env.c (implementation information)
- move env_location declaration
- activate env info command in sandbox (new)
- add pytest test_env_info and test_env_info_test (new)

Patrick Delaunay (4):
cmd: env: add option for quiet output on env info
cmd: env: check real location for env info command
configs: sandbox: Enable sub command 'env info'
test: env: add test for env info sub-command

 cmd/Kconfig                        |  1 +
 cmd/nvedit.c                       | 37 ++++++++++++++----
 configs/sandbox64_defconfig        |  1 +
 configs/sandbox_defconfig          |  1 +
 configs/sandbox_flattree_defconfig |  1 +
 configs/sandbox_spl_defconfig      |  1 +
 include/env_internal.h             | 11 ++++++
 test/py/tests/test_env.py          | 63 ++++++++++++++++++++++++++++++
 8 files changed, 108 insertions(+), 8 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH RESEND v5 1/4 cmd: env: add option for quiet output on env info

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Next boot:
Environment was loaded from persistent storage Environment can be persisted

---

(no changes since v1)

 cmd/Kconfig  |  1 +
 cmd/nvedit.c | 26 +++++++++++++++++++-------
 2 files changed, 20 insertions(+), 7 deletions(-)
cmd/Kconfig +1 -0
index 192b3b262f..1de57988ae 100644
@@ -607,6 +607,7 @@ config CMD_NVEDIT_INFO
 	  This command can be optionally used for evaluation in scripts:
 	  [-d] : evaluate whether default environment is used
 	  [-p] : evaluate whether environment can be persisted
+	  [-q] : quiet output
 	  The result of multiple evaluations will be combined with AND.
 
 endmenu
cmd/nvedit.c +19 -7
index 49338b4d36..68cb1a4a8f 100644
@@ -1224,12 +1224,15 @@ static int print_env_info(void)
  * env info - display environment information
  * env info [-d] - evaluate whether default environment is used
  * env info [-p] - evaluate whether environment can be persisted
+ *      Add [-q] - quiet mode, use only for command result, for test by example:
+ *                 test env info -p -d -q
  */
 static int do_env_info(struct cmd_tbl *cmdtp, int flag,
 		       int argc, char *const argv[])
 {
 	int eval_flags = 0;
 	int eval_results = 0;
+	bool quiet = false;
 
 	/* display environment information */
 	if (argc <= 1)
@@ -1247,6 +1250,9 @@ static int do_env_info(struct cmd_tbl *cmdtp, int flag,
 			case 'p':
 				eval_flags |= ENV_INFO_IS_PERSISTED;
 				break;
+			case 'q':
+				quiet = true;
+				break;
 			default:
 				return CMD_RET_USAGE;
 			}
@@ -1256,20 +1262,24 @@ static int do_env_info(struct cmd_tbl *cmdtp, int flag,
 	/* evaluate whether default environment is used */
 	if (eval_flags & ENV_INFO_IS_DEFAULT) {
 		if (gd->flags & GD_FLG_ENV_DEFAULT) {
-			printf("Default environment is used\n");
+			if (!quiet)
+				printf("Default environment is used\n");
 			eval_results |= ENV_INFO_IS_DEFAULT;
 		} else {
-			printf("Environment was loaded from persistent storage\n");
+			if (!quiet)
+				printf("Environment was loaded from persistent storage\n");
 		}
 	}
 
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
 #if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
-		printf("Environment can be persisted\n");
+		if (!quiet)
+			printf("Environment can be persisted\n");
 		eval_results |= ENV_INFO_IS_PERSISTED;
 #else
-		printf("Environment cannot be persisted\n");
+		if (!quiet)
+			printf("Environment cannot be persisted\n");
 #endif
 	}
 
@@ -1326,7 +1336,7 @@ static struct cmd_tbl cmd_env_sub[] = {
 	U_BOOT_CMD_MKENT(import, 5, 0, do_env_import, "", ""),
 #endif
 #if defined(CONFIG_CMD_NVEDIT_INFO)
-	U_BOOT_CMD_MKENT(info, 2, 0, do_env_info, "", ""),
+	U_BOOT_CMD_MKENT(info, 3, 0, do_env_info, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_env_print, "", ""),
 #if defined(CONFIG_CMD_RUN)
@@ -1405,8 +1415,10 @@ static char env_help_text[] =
 #endif
 #if defined(CONFIG_CMD_NVEDIT_INFO)
 	"env info - display environment information\n"
-	"env info [-d] - whether default environment is used\n"
-	"env info [-p] - whether environment can be persisted\n"
+	"env info [-d] [-p] [-q] - evaluate environment information\n"
+	"      \"-d\": default environment is used\n"
+	"      \"-p\": environment can be persisted\n"
+	"      \"-q\": quiet output\n"
 #endif
 	"env print [-a | name ...] - print environment\n"
 #if defined(CONFIG_CMD_NVEDIT_EFI)
Signature · 1 line
2.17.1
#2 lore raw

PATCH RESEND v5 1/4 cmd: env: add option for quiet output on env info

Quoted 15 lines · Patrick Delaunay

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Quoted 6 lines

Next boot:
Environment was loaded from persistent storage Environment can be persisted

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200619/350ab571/attachment.sig>
#3 lore raw

PATCH RESEND v5 1/4 cmd: env: add option for quiet output on env info

In reply to Patrick Delaunay
Quoted 15 lines · Patrick Delaunay

The "env info" can be use for test with -d and -p parameter, in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default environment is used and persistent storage is managed with:
if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces First boot:
Default environment is used
Environment can be persisted
Saving Environment to EXT4... File System is consistent

Quoted 7 lines

Next boot:
Environment was loaded from persistent storage Environment can be persisted

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200727/3c65cd10/attachment.sig>
#4 lore raw

PATCH RESEND v5 2/4 cmd: env: check real location for env info command

In reply to Patrick Delaunay

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

This patch solves issue for stm32mp1 platform, when the boot device is USB.

---

(no changes since v2)

Changes in v2:
- update prototype in env_internal.h as done in "env: add prototypes for weak function"
- remove comment change in env.c (implementation information)
- move env_location declaration

 cmd/nvedit.c           | 15 ++++++++++++---
 include/env_internal.h | 11 +++++++++++
 2 files changed, 23 insertions(+), 3 deletions(-)
cmd/nvedit.c +12 -3
index 68cb1a4a8f..0f9cea96f3 100644
@@ -1233,6 +1233,9 @@ static int do_env_info(struct cmd_tbl *cmdtp, int flag,
 	int eval_flags = 0;
 	int eval_results = 0;
 	bool quiet = false;
+#if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
+	enum env_location loc;
+#endif
 
 	/* display environment information */
 	if (argc <= 1)
@@ -1274,9 +1277,15 @@ static int do_env_info(struct cmd_tbl *cmdtp, int flag,
 	/* evaluate whether environment can be persisted */
 	if (eval_flags & ENV_INFO_IS_PERSISTED) {
 #if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
-		if (!quiet)
-			printf("Environment can be persisted\n");
-		eval_results |= ENV_INFO_IS_PERSISTED;
+		loc = env_get_location(ENVOP_SAVE, gd->env_load_prio);
+		if (ENVL_NOWHERE != loc && ENVL_UNKNOWN != loc) {
+			if (!quiet)
+				printf("Environment can be persisted\n");
+			eval_results |= ENV_INFO_IS_PERSISTED;
+		} else {
+			if (!quiet)
+				printf("Environment cannot be persisted\n");
+		}
 #else
 		if (!quiet)
 			printf("Environment cannot be persisted\n");
include/env_internal.h +11 -0
index e89fbdb1b7..66550434c3 100644
@@ -211,6 +211,17 @@ struct env_driver {
 
 extern struct hsearch_data env_htab;
 
+/**
+ * env_get_location()- Provide the best location for the U-Boot environment
+ *
+ * It is a weak function allowing board to overidde the environment location
+ *
+ * @op: operations performed on the environment
+ * @prio: priority between the multiple environments, 0 being the
+ *        highest priority
+ * @return  an enum env_location value on success, or -ve error code.
+ */
+enum env_location env_get_location(enum env_operation op, int prio);
 #endif /* DO_DEPS_ONLY */
 
 #endif /* _ENV_INTERNAL_H_ */
Signature · 1 line
2.17.1
#5 lore raw

PATCH RESEND v5 2/4 cmd: env: check real location for env info command

Quoted 8 lines · Patrick Delaunay

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

Quoted 5 lines

This patch solves issue for stm32mp1 platform, when the boot device is USB.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200619/019d0a20/attachment.sig>
#6 lore raw

PATCH RESEND v5 2/4 cmd: env: check real location for env info command

In reply to Patrick Delaunay
Quoted 8 lines · Patrick Delaunay

Check the current ENV location, dynamically provided by the weak function env_get_location to be sure that the environment can be persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board dynamically select the available storage location (according boot device for example).

Quoted 6 lines

This patch solves issue for stm32mp1 platform, when the boot device is USB.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200727/8d43e0ce/attachment.sig>
#7 lore raw

PATCH RESEND v5 3/4 configs: sandbox: Enable sub command 'env info'

In reply to Patrick Delaunay

Enable support for sub command 'env info' in sandbox with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily at adding unit test.

---

(no changes since v2)

Changes in v2:
- activate env info command in sandbox (new)

 configs/sandbox64_defconfig        | 1 +
 configs/sandbox_defconfig          | 1 +
 configs/sandbox_flattree_defconfig | 1 +
 configs/sandbox_spl_defconfig      | 1 +
 4 files changed, 4 insertions(+)
configs/sandbox64_defconfig +1 -0
index a3f049e124..a2410b3368 100644
@@ -30,6 +30,7 @@ CONFIG_CMD_GREPENV=y
 CONFIG_CMD_ENV_CALLBACK=y
 CONFIG_CMD_ENV_FLAGS=y
 CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_NVEDIT_INFO=y
 CONFIG_LOOPW=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
configs/sandbox_defconfig +1 -0
index 5b7569319b..0c9e0b9f1f 100644
@@ -34,6 +34,7 @@ CONFIG_CMD_GREPENV=y
 CONFIG_CMD_ENV_CALLBACK=y
 CONFIG_CMD_ENV_FLAGS=y
 CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_NVEDIT_INFO=y
 CONFIG_LOOPW=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
configs/sandbox_flattree_defconfig +1 -0
index 21f9047046..bc4819f998 100644
@@ -24,6 +24,7 @@ CONFIG_CMD_BOOTEFI_HELLO=y
 # CONFIG_CMD_ELF is not set
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_NVEDIT_INFO=y
 CONFIG_LOOPW=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
configs/sandbox_spl_defconfig +1 -0
index fc8b26e88c..64f2ed5102 100644
@@ -34,6 +34,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_ENV_CALLBACK=y
 CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_NVEDIT_INFO=y
 CONFIG_LOOPW=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
Signature · 1 line
2.17.1
#8 lore raw

PATCH RESEND v5 3/4 configs: sandbox: Enable sub command 'env info'

Quoted 6 lines · Patrick Delaunay

Enable support for sub command 'env info' in sandbox with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily at adding unit test.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200727/c6ca2bcb/attachment.sig>
#9 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

In reply to Patrick Delaunay

Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that can be executed on real hardware device without assumption

test_env_info_sandbox: test the result on sandbox with a known ENV configuration: ready & default & persistent

The quiet option '-q' is used for support in shell test; for example:
if env info -p -d -q; then env save; fi

---

Changes in v5:
- allow to execute cmd_nvedit_info on real board
- rename test_env_info_quiet to test_env_info_sandbox

Changes in v4:
- rebase on master branch
- move 5/7 stm32mp1: configs: activate CMD_ERASEENV in a new serie 183380
- move 2/7 and 4/7 in a new serie 183387

Changes in v3:
- update commit message (sub-commandi)
- rename test_env_info_test to test_env_info_quiet

Changes in v2:
- add pytest test_env_info and test_env_info_test (new)

 test/py/tests/test_env.py | 63 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)
test/py/tests/test_env.py +63 -0
index 6ff38f1020..a64aaa9bc5 100644
@@ -336,3 +336,66 @@ def test_env_import_whitelist_delete(state_test_env):
     unset_var(state_test_env, 'foo2')
     unset_var(state_test_env, 'foo3')
     unset_var(state_test_env, 'foo4')
+
+ at pytest.mark.buildconfigspec('cmd_nvedit_info')
+def test_env_info(state_test_env):
+
+    """Test 'env info' command with all possible options.
+    """
+    c = state_test_env.u_boot_console
+
+    response = c.run_command('env info')
+    nb_line = 0
+    for l in response.split('\n'):
+        if 'env_valid = ' in l:
+            assert '= invalid' in l or '= valid' in l or '= redundant' in l
+            nb_line += 1
+        elif 'env_ready =' in l or 'env_use_default =' in l:
+            assert '= true' in l or '= false' in l
+            nb_line += 1
+        else:
+            assert true
+    assert nb_line == 3
+
+    response = c.run_command('env info -p -d')
+    assert 'Default environment is used' in response or "Environment was loaded from persistent storage" in response
+    assert 'Environment can be persisted' in response or "Environment cannot be persisted" in response
+
+    response = c.run_command('env info -p -d -q')
+    assert response == ""
+
+    response = c.run_command('env info -p -q')
+    assert response == ""
+
+    response = c.run_command('env info -d -q')
+    assert response == ""
+
+ at pytest.mark.boardspec('sandbox')
+ at pytest.mark.buildconfigspec('cmd_nvedit_info')
+ at pytest.mark.buildconfigspec('cmd_echo')
+def test_env_info_sandbox(state_test_env):
+
+    """Test 'env info' command result with several options on sandbox
+       with a known ENV configuration: ready & default & persistent
+    """
+    c = state_test_env.u_boot_console
+
+    response = c.run_command('env info')
+    assert 'env_ready = true' in response
+    assert 'env_use_default = true' in response
+
+    response = c.run_command('env info -p -d')
+    assert 'Default environment is used' in response
+    assert 'Environment cannot be persisted' in response
+
+    response = c.run_command('env info -d -q')
+    response = c.run_command('echo $?')
+    assert response == "0"
+
+    response = c.run_command('env info -p -q')
+    response = c.run_command('echo $?')
+    assert response == "1"
+
+    response = c.run_command('env info -d -p -q')
+    response = c.run_command('echo $?')
+    assert response == "1"
Signature · 1 line
2.17.1
#10 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

Quoted 11 lines · Patrick Delaunay

Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that can be executed on real hardware device without assumption

test_env_info_sandbox: test the result on sandbox with a known ENV configuration: ready & default & persistent

The quiet option '-q' is used for support in shell test; for example:
if env info -p -d -q; then env save; fi

Quoted 1 line

+def test_env_info(state_test_env):

...

test/py/tests/test_env.py def test_env_import_whitelist_delete(state_test_env): · line 357

Quoted 9 lines
test/py/tests/test_env.py +9 -0
+    for l in response.split('\n'):
+        if 'env_valid = ' in l:
+            assert '= invalid' in l or '= valid' in l or '= redundant' in l
+            nb_line += 1
+        elif 'env_ready =' in l or 'env_use_default =' in l:
+            assert '= true' in l or '= false' in l
+            nb_line += 1
+        else:
+            assert true

Those last two lines don't seem terribly useful:-)

#11 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

Hi Stephen,

Quoted 9 lines

From: Stephen Warren <[email protected]>
Sent: lundi 22 juin 2020 20:51

Quoted 5 lines · Patrick Delaunay

Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that can be executed on real hardware device without assumption

Quoted 7 lines
Quoted 5 lines

test_env_info_sandbox: test the result on sandbox with a known ENV
configuration: ready & default & persistent

The quiet option '-q' is used for support in shell test; for example:
if env info -p -d -q; then env save; fi

Thanks

Quoted 12 lines
Quoted 1 line

+def test_env_info(state_test_env):

...

test/py/tests/test_env.py def test_env_import_whitelist_delete(state_test_env): · line 357

Quoted 9 lines
test/py/tests/test_env.py +9 -0
+    for l in response.split('\n'):
+        if 'env_valid = ' in l:
+            assert '= invalid' in l or '= valid' in l or '= redundant' in l
+            nb_line += 1
+        elif 'env_ready =' in l or 'env_use_default =' in l:
+            assert '= true' in l or '= false' in l
+            nb_line += 1
+        else:
+            assert true
Quoted 1 line

Those last two lines don't seem terribly useful:-)

Not really,
beacuse I add the nb_line check,
this first check can be removed.

Do expect a V6 just for that?

Patrick

#12 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

Quoted 34 lines · Patrick DELAUNAY

Hi Stephen,

Quoted 9 lines

From: Stephen Warren <[email protected]>
Sent: lundi 22 juin 2020 20:51

Quoted 5 lines · Patrick Delaunay

Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that can be executed on real hardware device without assumption

Quoted 7 lines
Quoted 5 lines

test_env_info_sandbox: test the result on sandbox with a known ENV
configuration: ready & default & persistent

The quiet option '-q' is used for support in shell test; for example:
if env info -p -d -q; then env save; fi

Thanks

Quoted 12 lines
Quoted 1 line

+def test_env_info(state_test_env):

...

Quoted 9 lines
test/py/tests/test_env.py +9 -0
+    for l in response.split('\n'):
+        if 'env_valid = ' in l:
+            assert '= invalid' in l or '= valid' in l or '= redundant' in l
+            nb_line += 1
+        elif 'env_ready =' in l or 'env_use_default =' in l:
+            assert '= true' in l or '= false' in l
+            nb_line += 1
+        else:
+            assert true
Quoted 7 lines
Quoted 1 line

Those last two lines don't seem terribly useful:-)

Not really,
beacuse I add the nb_line check,
this first check can be removed.

Do expect a V6 just for that?

Probably not.

#13 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

Hi Stephen,

Quoted 12 lines

From: Stephen Warren <[email protected]>
Sent: mardi 23 juin 2020 22:25

Quoted 8 lines · Patrick DELAUNAY

Hi Stephen,

Quoted 6 lines

From: Stephen Warren <[email protected]>
Sent: lundi 22 juin 2020 20:51

Quoted 2 lines · Patrick Delaunay

Add a pytest for testing the env info sub-command:

...

Quoted 15 lines
Quoted 15 lines
Quoted 14 lines
Quoted 2 lines

+def test_env_info(state_test_env):

...

test/py/tests/test_env.py def test_env_import_whitelist_delete(state_test_env): · line 357

Quoted 9 lines
test/py/tests/test_env.py +9 -0
+    for l in response.split('\n'):
+        if 'env_valid = ' in l:
+            assert '= invalid' in l or '= valid' in l or '= redundant' in l
+            nb_line += 1
+        elif 'env_ready =' in l or 'env_use_default =' in l:
+            assert '= true' in l or '= false' in l
+            nb_line += 1
+        else:
+            assert true

Those last two lines don't seem terribly useful:-)

Quoted 7 lines
Quoted 5 lines

Not really,
beacuse I add the nb_line check,
this first check can be removed.

Do expect a V6 just for that?

Probably not.

OK I will keep this remark if I need to update the serie (or the next planned updates of this test)

Patrick

#14 lore raw

PATCH RESEND v5 4/4 test: env: add test for env info sub-command

In reply to Patrick Delaunay
Quoted 8 lines · Patrick Delaunay

Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that can be executed on real hardware device without assumption

test_env_info_sandbox: test the result on sandbox with a known ENV configuration: ready & default & persistent

Quoted 6 lines

The quiet option '-q' is used for support in shell test; for example:
if env info -p -d -q; then env save; fi

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200727/57ff62ce/attachment.sig>