midi: Fix SysEx parser in MIDI plugin
PATCH v2 1/2 midi: Fix SysEx parser in MIDI plugin
From: Tedd Ho-Jeong An <[email protected]>
The SysEx end of message parser didn't consider the fact that timestampsLow are in the stream and it might have the EOX (F7) byte as well.
Fix that by always assuming the first system message byte is the timestampLow.
Future work would involve support other type of system message bytes, such as real-time.
--- profiles/midi/libmidi.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-)
profiles/midi/libmidi.c +31 -7
@@ -331,6 +331,30 @@ static size_t handle_end_of_sysex(struct midi_read_parser *parser,return sysex_length +1 ;/* +1 because of timestampLow */ } +/* Searches the end of a SysEx message that contains a timestampLow +* before the SysEx end byte. Returns the number of bytes of valid +* SysEx payload in the buffer. +*/ +static size_t sysex_eox_len (const uint8_t *data,size_t size) +{ +size_t i =0 ; + +MIDI_ASSERT (size >0 ); + +if (data[i] ==0xF0 ) + i++; + +/* Search for timestamp low */ +while (i < size) { +if ((data[i] &0x80 )) { + i++; +break ; + } + i++; + } + +return (i < size && data[i] ==0xF7 ) ? i :0 ; +} size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,
@@ -368,14 +392,14 @@ size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,/* System Common Messages */ case 0xF0 :/* SysEx Start */ { -uint8_t *pos; +size_t sysex_length;/* cleanup Running Status Message */ parser->rstatus =0 ; -/* Avoid parsing if SysEx is contained in one BLE packet */ -if ((pos =memchr (data + i,0xF7 , size - i))) { -const size_t sysex_length = pos - (data + i); + sysex_length =sysex_eox_len (data + i, size - i); +/* Search for End of SysEx message in one BLE message */ +if (sysex_length >0 ) { midi_size =handle_end_of_sysex (parser, ev, data + i, sysex_length); }else {
@@ -424,10 +448,10 @@ size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,/* Check for SysEx messages */ if (parser->sysex_stream.len >0 ) { -uint8_t *pos; +size_t sysex_length; -if ((pos =memchr (data + i,0xF7 , size - i))) { -const size_t sysex_length = pos - (data + i); + sysex_length =sysex_eox_len (data + i, size - i); +if (sysex_length >0 ) { midi_size =handle_end_of_sysex (parser, ev, data + i, sysex_length); }else {
Signature · 1 line
2.25.4
PATCH v2 2/2 midi: Fix random empty timestamp_high value
From: Tedd Ho-Jeong An <[email protected]>
The timestamp_high value is assigned from the monotonic time but there is a chance that the value becomes zero because it reads the value between bit8 and bit13.
This patch makes sure the timestamp_high value get a non-zero value.
--- profiles/midi/libmidi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
profiles/midi/libmidi.c +7 -2
@@ -77,8 +77,13 @@ inline static void append_timestamp_high_maybe(struct midi_write_parser *parser)if (midi_write_has_data (parser))return ; - parser->rtime =g_get_monotonic_time () /1000 ;/* convert µs to ms */ - timestamp_high |= (parser->rtime &0x1F80 ) >>7 ; +/* Make sure timesampt_high is assigned a non-zero value */ +do { +/* convert µs to ms */ + parser->rtime =g_get_monotonic_time () /1000 ; + timestamp_high |= (parser->rtime &0x1F80 ) >>7 ; + }while (timestamp_high ==0x80 ); +/* set timestampHigh */ buffer_append_byte (&parser->midi_stream, timestamp_high); }
Signature · 1 line
2.25.4
Hi Tedd,
Quoted 85 lines · On Fri, Jun 19, 2020 at 9:27 PM <[email protected]> wrote:
From: Tedd Ho-Jeong An <[email protected]>
The SysEx end of message parser didn't consider the fact that timestampsLow are in the stream and it might have the EOX (F7) byte as well.
Fix that by always assuming the first system message byte is the timestampLow.
Future work would involve support other type of system message bytes, such as real-time.
--- profiles/midi/libmidi.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-)profiles/midi/libmidi.c +31
-8@@ -331,6 +331,30 @@ static size_t handle_end_of_sysex(struct midi_read_parser *parser,return sysex_length +1 ;/* +1 because of timestampLow */ } +/* Searches the end of a SysEx message that contains a timestampLow +* before the SysEx end byte. Returns the number of bytes of valid +* SysEx payload in the buffer. +*/ +static size_t sysex_eox_len (const uint8_t *data,size_t size) +{ +size_t i =0 ; + +MIDI_ASSERT (size >0 ); + +if (data[i] ==0xF0 ) + i++; + +/* Search for timestamp low */ +while (i < size) { +if ((data[i] &0x80 )) { + i++; +break ; + } + i++; + } + +return (i < size && data[i] ==0xF7 ) ? i :0 ; +} size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,@@ -368,14 +392,14 @@ size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,/* System Common Messages */ case 0xF0 :/* SysEx Start */ { -uint8_t *pos; +size_t sysex_length;/* cleanup Running Status Message */ parser->rstatus =0 ; -/* Avoid parsing if SysEx is contained in one BLE packet */ -if ((pos =memchr (data + i,0xF7 , size - i))) { -const size_t sysex_length = pos - (data + i); + sysex_length =sysex_eox_len (data + i, size - i); +/* Search for End of SysEx message in one BLE message */ +if (sysex_length >0 ) { midi_size =handle_end_of_sysex (parser, ev, data + i, sysex_length); }else {@@ -424,10 +448,10 @@ size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,/* Check for SysEx messages */ if (parser->sysex_stream.len >0 ) { -uint8_t *pos; +size_t sysex_length; -if ((pos =memchr (data + i,0xF7 , size - i))) { -const size_t sysex_length = pos - (data + i); + sysex_length =sysex_eox_len (data + i, size - i); +if (sysex_length >0 ) { midi_size =handle_end_of_sysex (parser, ev, data + i, sysex_length); }else { --
Quoted 2 lines
2.25.4
Applied, thanks.
Signature · 1 line
Luiz Augusto von Dentz