Skip to contentSkip to conversation

man4/*: srcfix, remove trailing space in "strings"

PATCH In review Bjarni Ingi Gislason 2 participants 2 messages Jun 20, 2020 – Jun 21, 2020 Man-pages: manual pages for Linux -- Sections 2, 3, 4, 5, and 7

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 man4/*: srcfix, remove trailing space in "strings"

Trim trailing space.

There is no change in the output from "nroff" and "groff".

---
 man4/console_codes.4 | 4 ++--
 man4/initrd.4        | 2 +-
 man4/loop.4          | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
man4/console_codes.4 +2 -2
index 113f43151..be34a0d91 100644
@@ -397,11 +397,11 @@ ESC [ 11 ; \fIn\fP ]	Set bell duration in msec.
 ESC [ 12 ; \fIn\fP ]	Bring specified console to the front.
 ESC [ 13 ]      	Unblank the screen.
 ESC [ 14 ; \fIn\fP ]   	Set the VESA powerdown interval in minutes.
-ESC [ 15 ]      	T{
+ESC [ 15 ]	T{
 Bring the previous console to the front
 (since Linux 2.6.0).
 T}
-ESC [ 16 ; \fIn\fP ]   	T{
+ESC [ 16 ; \fIn\fP ]	T{
 Set the cursor blink interval in milliseconds
 (since Linux 4.2).
 T}
man4/initrd.4 +1 -1
index a10736456..e41917817 100644
@@ -75,7 +75,7 @@ is a read-only block device.
 This device is a RAM disk that is initialized (e.g., loaded)
 by the boot loader before the kernel is started.
 The kernel then can use
-.IR /dev/initrd "'s "
+.IR /dev/initrd "'s"
 contents for a two-phase system boot-up.
 .PP
 In the first boot-up phase, the kernel starts up
man4/loop.4 +1 -1
index 510ed88a7..1623cad0e 100644
@@ -42,7 +42,7 @@ You could do
 .in +4n
 .EX
 $ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
-$ \fBsudo losetup /dev/loop4 file.img \fP
+$ \fBsudo losetup /dev/loop4 file.img\fP
 $ \fBsudo mkfs -t ext4 /dev/loop4\fP
 $ \fBsudo mkdir /myloopdev\fP
 $ \fBsudo mount /dev/loop4 /myloopdev\fP
Signature · 1 line
2.27.0
#1 lore raw

Hello Bjarni,

Quoted 3 lines · Bjarni Ingi Gislason

Trim trailing space.

There is no change in the output from "nroff" and "groff".

Thanks. Applied.

Cheers,

Michael

Quoted 52 lines
---
 man4/console_codes.4 | 4 ++--
 man4/initrd.4        | 2 +-
 man4/loop.4          | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
man4/console_codes.4 +2 -2
index 113f43151..be34a0d91 100644
@@ -397,11 +397,11 @@ ESC [ 11 ; \fIn\fP ]	Set bell duration in msec.
 ESC [ 12 ; \fIn\fP ]	Bring specified console to the front.
 ESC [ 13 ]      	Unblank the screen.
 ESC [ 14 ; \fIn\fP ]   	Set the VESA powerdown interval in minutes.
-ESC [ 15 ]      	T{
+ESC [ 15 ]	T{
 Bring the previous console to the front
 (since Linux 2.6.0).
 T}
-ESC [ 16 ; \fIn\fP ]   	T{
+ESC [ 16 ; \fIn\fP ]	T{
 Set the cursor blink interval in milliseconds
 (since Linux 4.2).
 T}
man4/initrd.4 +1 -1
index a10736456..e41917817 100644
@@ -75,7 +75,7 @@ is a read-only block device.
 This device is a RAM disk that is initialized (e.g., loaded)
 by the boot loader before the kernel is started.
 The kernel then can use
-.IR /dev/initrd "'s "
+.IR /dev/initrd "'s"
 contents for a two-phase system boot-up.
 .PP
 In the first boot-up phase, the kernel starts up
man4/loop.4 +1 -1
index 510ed88a7..1623cad0e 100644
@@ -42,7 +42,7 @@ You could do
 .in +4n
 .EX
 $ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
-$ \fBsudo losetup /dev/loop4 file.img \fP
+$ \fBsudo losetup /dev/loop4 file.img\fP
 $ \fBsudo mkfs -t ext4 /dev/loop4\fP
 $ \fBsudo mkdir /myloopdev\fP
 $ \fBsudo mount /dev/loop4 /myloopdev\fP
Signature · 3 lines
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/