weekly fstrim (still) necessary?
On SLES a weekly fstrim is done via a btrfsmaintenance script, which is missing on Ubuntu.
For ext4 filesystem an explicite fstrim call is no longer neccessary, what about btrfs?
Shall I call fstrim via /etc/cron.weekly ?
Signature · 6 lines
Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: [email protected] Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: http://www.tik.uni-stuttgart.de/ REF:<[email protected]>
21.06.2020 08:42, Ulli Horlacher пишет:
Quoted 4 lines
On SLES a weekly fstrim is done via a btrfsmaintenance script, which is missing on Ubuntu.
For ext4 filesystem an explicite fstrim call is no longer neccessary,
Why?
Quoted 4 lines
what
about btrfs?
Shall I call fstrim via/etc/cron.weekly?
It is really up to you. Is it question about distribution defaults, or what exactly are you asking?
Hello,
Quoted 7 lines · Ulli Horlacher
On SLES a weekly fstrim is done via a btrfsmaintenance script, which is missing on Ubuntu.
For ext4 filesystem an explicite fstrim call is no longer neccessary, what about btrfs?
Shall I call fstrim via/etc/cron.weekly?
Unless you mount with the discard option [1], I'd say yes, the manpage suggests so.
--lukas
[1] https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5)#MOUNT_OPTIONS
Quoted 6 lines · Ulli Horlacher
On SLES a weekly fstrim is done via a btrfsmaintenance script, which is missing on Ubuntu.
For ext4 filesystem an explicite fstrim call is no longer neccessary, what about btrfs?
Shall I call fstrim via/etc/cron.weekly?
Both ext4 and btrfs may or may not auto-discard in the write path, depending on mount option. A lot of disks handle such frequent small discards poorly -- usually with a greatly decreased performance, although data loss in not unknown.
If you test your disk and know that it is happy with tons of small discards, then the discard mount option is good for you. Otherwise, you want to do large discards once in a while -- be it a day or a week.
Not discarding at all is a bad idea on most disks.
Meow!
Signature · 4 lines
⢀⣴⠾⠻⢶⣦⠀ ⣾⠁⢠⠒⠀⣿⡁ in the beginning was the boot and root floppies and they were good. ⢿⡄⠘⠷⠚⠋⠀ -- <willmore> on #linux-sunxi ⠈⠳⣄⠀⠀⠀⠀
Quoted 7 lines · Ulli Horlacher
On SLES a weekly fstrim is done via a btrfsmaintenance script, which is missing on Ubuntu.
For ext4 filesystem an explicite fstrim call is no longer neccessary, what about btrfs?
Shall I call fstrim via/etc/cron.weekly?
util-linux provides fstrim.service and fstrim.timer for a while now. fstrim.timer runs on Monday at 00:00 local time. The upstream default is disabled, some distributions enable it by default. You can use this until your kernel supports discard=async mount option for btrfs.
Signature · 1 line
Chris Murphy
Quoted 5 lines · Chris Murphy
Quoted 1 line
Shall I call fstrim via
/etc/cron.weekly?util-linux provides fstrim.service and fstrim.timer for a while now. fstrim.timer runs on Monday at 00:00 local time. The upstream default is disabled, some distributions enable it by default.
On Ubuntu 18.04 and RHEL 7.8 "systemctl is-enabled fstrim" returns "static"
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
Signature · 6 lines
Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: [email protected] Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: http://www.tik.uni-stuttgart.de/ REF:<CAJCQCtSbCid6OzvjK9fxXZosS_PAk2Lr7=VTpNijuuZXmRVVEg@mail.gmail.com>
Quoted 11 lines · Ulli Horlacher
Quoted 5 lines · Chris Murphy
Quoted 1 line
Shall I call fstrim via
/etc/cron.weekly?util-linux provides fstrim.service and fstrim.timer for a while now. fstrim.timer runs on Monday at 00:00 local time. The upstream default is disabled, some distributions enable it by default.
On Ubuntu 18.04 and RHEL 7.8 "systemctl is-enabled fstrim" returns "static"
You need to check fstrim.timer, which in turn triggers fstrim.service.
Signature · 1 line
Chris Murphy
Quoted 8 lines · Chris Murphy
Quoted 6 lines
Quoted 3 lines
util-linux provides fstrim.service and fstrim.timer for a while now. fstrim.timer runs on Monday at 00:00 local time. The upstream default is disabled, some distributions enable it by default.
On Ubuntu 18.04 and RHEL 7.8 "systemctl is-enabled fstrim" returns "static"
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timer [Unit] Description=Discard unused blocks once a week Documentation=man:fstrim ConditionVirtualization=!container
[Timer]
OnCalendar=weekly
AccuracySec=1h
Persistent=true
[Install]
WantedBy=timers.target
root@fex:~# cat /lib/systemd/system/fstrim.service [Unit] Description=Discard unused blocks ConditionVirtualization=!container
[Service]
Type=oneshot
ExecStart=/sbin/fstrim -av
Signature · 6 lines
Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: [email protected] Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: http://www.tik.uni-stuttgart.de/ REF:<CAJCQCtQmrc5m=H6d6xZiGvuzRrxBhf=wgf8bAMXZ_4p8F3AJFw@mail.gmail.com>
Quoted 27 lines · Ulli Horlacher
Quoted 8 lines · Chris Murphy
Quoted 6 lines
Quoted 3 lines
util-linux provides fstrim.service and fstrim.timer for a while now. fstrim.timer runs on Monday at 00:00 local time. The upstream default is disabled, some distributions enable it by default.
On Ubuntu 18.04 and RHEL 7.8 "systemctl is-enabled fstrim" returns "static"
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timer [Unit] Description=Discard unused blocks once a week Documentation=man:fstrim ConditionVirtualization=!container[Timer]
OnCalendar=weekly
AccuracySec=1h
Persistent=true[Install]
WantedBy=timers.target
Quoted 9 lines
root@fex:~# cat /lib/systemd/system/fstrim.service [Unit] Description=Discard unused blocks ConditionVirtualization=!container[Service]
Type=oneshot
ExecStart=/sbin/fstrim -av
I'm familiar with the contents of the files. Do you have a question?
Signature · 1 line
Chris Murphy
Quoted 7 lines · Chris Murphy
Quoted 5 lines
Quoted 1 line
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
Signature · 6 lines
Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: [email protected] Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: http://www.tik.uni-stuttgart.de/ REF:<CAJCQCtQ8GFAdg2HJY_HqDgW8WAp5L1GoLbKqUN2mZ7s_kS-8XA@mail.gmail.com>
Quoted 8 lines · Ulli Horlacher
Quoted 5 lines · Chris Murphy
Quoted 5 lines
Quoted 1 line
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.service
Quoted 7 lines
Quoted 1 line
I'm familiar with the contents of the files. Do you have a question?
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Quoted 12 lines · David Sterba
Quoted 11 lines · Ulli Horlacher
Quoted 7 lines · Chris Murphy
Quoted 5 lines
Quoted 1 line
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>
Quoted 13 lines · David Sterba
Quoted 12 lines · Ulli Horlacher
Quoted 8 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
Tim
Quoted 45 lines · Tim Cuthbertson
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>Quoted 13 lines · David Sterba
Quoted 12 lines · Ulli Horlacher
Quoted 8 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Quoted 7 lines
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
-chris
Quoted 57 lines · Chris Mason
Quoted 46 lines · Tim Cuthbertson
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>Quoted 14 lines · David Sterba
Quoted 13 lines · Ulli Horlacher
Quoted 9 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Quoted 7 lines
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
Quoted 4 lines
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
I'm curious if there's a possibility of confusion/conflict between scheduled fstrim combined with either discard or discard=async.
As in, if it's a big enough concern, maybe the scheduled fstrim needs to get smarter and parse mount options, and automatically deconflict.
Signature · 1 line
Chris Murphy
Quoted 63 lines · Chris Murphy
Quoted 57 lines · Chris Mason
Quoted 46 lines · Tim Cuthbertson
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>Quoted 14 lines · David Sterba
Quoted 13 lines · Ulli Horlacher
Quoted 9 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Quoted 7 lines
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
Quoted 4 lines
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
Quoted 5 lines
I'm curious if there's a possibility of confusion/conflict between scheduled fstrim combined with either discard or discard=async.
As in, if it's a big enough concern, maybe the scheduled fstrim needs to get smarter and parse mount options, and automatically deconflict.
It should do the right thing, any conflict there would be a kernel bug. But since we don’t do fstrim here, it seems like the mostly likely spot a bug would hide.
-chris
Oh, no. No fstrims were run during the short length of time that I was trying discard=async. I run my fstrims, manually.
Tim
Quoted 72 lines · Chris Murphy
Quoted 57 lines · Chris Mason
Quoted 46 lines · Tim Cuthbertson
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>Quoted 14 lines · David Sterba
Quoted 13 lines · Ulli Horlacher
Quoted 9 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Quoted 7 lines
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
Quoted 4 lines
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
I'm curious if there's a possibility of confusion/conflict between scheduled fstrim combined with either discard or discard=async.
As in, if it's a big enough concern, maybe the scheduled fstrim needs to get smarter and parse mount options, and automatically deconflict.
--
Chris Murphy
A message that is not in the archive (sent off-list or not yet received): CAAKzf7kMFqkrQyRzJ6WHVE95PBm2e0BX+QBua-2-rasp=BR7FQ@mail.gmail.com
---------- Forwarded message ---------
From: Tim Cuthbertson <[email protected]>
Date: Fri, Jun 26, 2020 at 2:30 PM
Subject: Re: weekly fstrim (still) necessary?
To: Chris Mason <[email protected]>
Well, I am going back to using a weekly, manual fstrim. I have been doing that for many months with no issues.
I cannot be certain that discard=async caused the problem. However, I had implemented that for the first time less than two days before I discovered the problem. My system was still booting and seeming to run fine, but then Firefox refused to start. I was looking for the problem and I found csum errors in the systemd journal. Then, I ran btrfs scrub, and found that there were 12,936 csum errors.
The systemd journals should still be available, if you'd like me to post them.
Tim
Quoted 62 lines · Chris Mason
Quoted 46 lines · Tim Cuthbertson
---------- Forwarded message ---------
From: Chris Mason <[email protected]>
Date: Mon, Jun 22, 2020 at 10:57 AM
Subject: Re: weekly fstrim (still) necessary?
To: David Sterba <[email protected]>
Cc: Btrfs BTRFS <[email protected]>Quoted 14 lines · David Sterba
Quoted 13 lines · Ulli Horlacher
Quoted 9 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris
Apparently, discard=async is still unsafe on Samsung SSDs, at least older models. I enabled it on my 850 Pro, and within two days I was getting uncorrectable errors (for csums). Scrub showed 12,936 uncorrectable errors.
While I was trying to recover, a long SMART analysis showed the actual drive to have no errors.
Quoted 7 lines
Then, the first recovery attempt failed. I had deleted and recreated the partition. When I was copying the backup snapshots back to the SSD, uncorrectable errors showed up, again (4,119 of them after copying one snapshot). I then overwrote the partition with all zeros, and when I copied the snapshots back to it, there were no errors. After recovering my filesystem, scrub still showed no errors. So, alls well that ends well, I guess.
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
-chris
A message that is not in the archive (sent off-list or not yet received): [email protected]
I was running kernel 5.7.5 on a fully updated Arch Linux desktop system.
Quoted 19 lines · Chris Mason
Quoted 10 lines · Tim Cuthbertson
Well, I am going back to using a weekly, manual fstrim. I have been doing that for many months with no issues.
I cannot be certain that discard=async caused the problem. However, I had implemented that for the first time less than two days before I discovered the problem. My system was still booting and seeming to run fine, but then Firefox refused to start. I was looking for the problem and I found csum errors in the systemd journal. Then, I ran btrfs scrub, and found that there were 12,936 csum errors.
Quoted 2 lines
The systemd journals should still be available, if you'd like me to post them.
I’ll try reproducing things, which kernel were you running?
-chris
Quoted 7 lines · Chris Mason
We’re using this on a pretty wide variety of hardware, so I’m surprised to hear this. Are you able to reproduce the problem? Is a periodic fstrim still happening?
-chris
I'm probably just confusing the terminology... But could this be related to the queued trim problems with Samsung for which they should be blakclisted?
Quoted 6 lines · On Fri, 26 Jun 2020 16:18:03 -0400 Remi Gauvin <[email protected]> wrote:
I'm probably just confusing the terminology... But could this be related to the queued trim problems with Samsung for which they should be blakclisted?
A Samsung 860 SSD that I have is the worst (compared to a dozen non-Samsung ones) when it comes to TRIM, NCQ, combination thereof, and compatibility with various SATA controllers.
However it should be noted that while the commit referenced is not in the mainline kernel anymore, a narrower blacklist applying to 840 and 850 models currently is [1]. And as the report is about the 850 Pro, queued TRIM should not have been the cause, as is already blacklisted in kernel for all "Samsung SSD 850". Can check in 'dmesg' for a note about it shortly after the SSD detection to confirm.
[1]
https://github.com/torvalds/linux/blob/master/drivers/ata/libata-core.c#L3952
Signature · 2 lines
With respect, Roman
discard=async triggers continuous disc activity for me without any calls to the filesystem.
Is this intentional?
Quoted 29 lines · Chris Mason
Quoted 13 lines · David Sterba
Quoted 12 lines · Ulli Horlacher
Quoted 8 lines · Chris Murphy
Quoted 6 lines
Quoted 2 lines
You need to check fstrim.timer, which in turn triggers fstrim.service.
root@fex:~# cat /lib/systemd/system/fstrim.timerroot@fex:~# cat /lib/systemd/system/fstrim.serviceI'm familiar with the contents of the files. Do you have a question?
Quoted 7 lines
Quoted 4 lines
You have deleted my question, it have asked:
This means: an extra fstrim (via btrfsmaintenance script, etc) is unnecessary?
You need only one service, either from the fstrim or from btrfsmaintenance.
Dennis’s async discard features are working much better here than either periodic trims or the traditional mount -o discard. I’d suggest moving to mount -o discard=async instead.
-chris