Skip to contentSkip to conversation

mx6slevk_spinor: Convert to DM_ETH

PATCH New Fabio Estevam 2 participants 6 messages Jun 9, 2020 – Jun 23, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 mx6slevk_spinor: Convert to DM_ETH

Convert to DM_ETH to avoid board removal from the project.

---
 configs/mx6slevk_spinor_defconfig | 3 +++
 1 file changed, 3 insertions(+)
configs/mx6slevk_spinor_defconfig +3 -0
index 4d348df691..67de522dd8 100644
@@ -44,6 +44,9 @@ CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
Signature · 2 lines
2.17.1
Convert
#1 lore raw

PATCH 2/3 mx6slevk_spl: Convert to DM_ETH

Convert to DM_ETH to avoid board removal from the project.

---
 configs/mx6slevk_spl_defconfig | 3 +++
 1 file changed, 3 insertions(+)
configs/mx6slevk_spl_defconfig +3 -0
index 3a0ae92bf2..143718a6a7 100644
@@ -52,6 +52,9 @@ CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/3 mx6slevk_spl: Convert to DM_ETH

Quoted 2 lines

Convert to DM_ETH to avoid board removal from the project.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH 3/3 mx6ull_14x14_evk_plugin: Convert to DM_ETH

In reply to Fabio Estevam

Convert to DM_ETH to avoid board removal from the project.

---
 configs/mx6ull_14x14_evk_plugin_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
configs/mx6ull_14x14_evk_plugin_defconfig +6 -0
index 2811d868ac..e6c31e64ba 100644
@@ -41,6 +41,12 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_REGULATOR=y
Signature · 1 line
2.17.1
#4 lore raw

PATCH 3/3 mx6ull_14x14_evk_plugin: Convert to DM_ETH

Quoted 2 lines

Convert to DM_ETH to avoid board removal from the project.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH 1/3 mx6slevk_spinor: Convert to DM_ETH

In reply to Fabio Estevam
Quoted 2 lines

Convert to DM_ETH to avoid board removal from the project.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================