Fix MMC access on Sabrelite
PATCH v2 1/1 Fix MMC access on Sabrelite
It appears that MMC access on the Sabrelite has been broken since cdcaee9518:
Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
Remove the board_mmc_init() and related entries now that we should be using DM_MMC, add PINCTRL so that things work as expected.
---
Changes in v2:
- Removed now redundant mmc header.
board/boundary/nitrogen6x/nitrogen6x.c | 72 -------------------------- configs/mx6qsabrelite_defconfig | 3 ++ 2 files changed, 3 insertions(+), 72 deletions(-)
board/boundary/nitrogen6x/nitrogen6x.c +0 -72
@@ -25,7 +25,6 @@#include <asm/mach-imx/spi.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/video.h> -#include <mmc.h> #include <fsl_esdhc_imx.h> #include <micrel.h> #include <miiphy.h>
@@ -161,26 +160,6 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { -IOMUX_PAD_CTRL (SD3_CLK__SD3_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_CMD__SD3_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT0__SD3_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT1__SD3_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT2__SD3_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT3__SD3_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT5__GPIO7_IO00 ,NO_PAD_CTRL ),/* CD */ -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { -IOMUX_PAD_CTRL (SD4_CLK__SD4_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_CMD__SD4_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT0__SD4_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT1__SD4_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT2__SD4_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT3__SD4_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (NANDF_D6__GPIO2_IO06 ,NO_PAD_CTRL ),/* CD */ -}; -static iomux_v3_cfg_t const enet_pads1[] = {IOMUX_PAD_CTRL (ENET_MDIO__ENET_MDIO ,ENET_PAD_CTRL ),IOMUX_PAD_CTRL (ENET_MDC__ENET_MDC ,ENET_PAD_CTRL ),
@@ -305,57 +284,6 @@ int board_ehci_power(int port, int on)#endif -#ifdef CONFIG_FSL_ESDHC_IMX -static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { - {USDHC3_BASE_ADDR }, - {USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd (struct mmc *mmc) -{ -struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; -int gp_cd = (cfg->esdhc_base ==USDHC3_BASE_ADDR ) ?IMX_GPIO_NR (7 ,0 ) : -IMX_GPIO_NR (2 ,6 ); - -gpio_direction_input (gp_cd); -return !gpio_get_value (gp_cd); -} - -int board_mmc_init (bd_t *bis) -{ -int ret; -u32 index =0 ; - - usdhc_cfg[0 ].sdhc_clk =mxc_get_clock (MXC_ESDHC3_CLK ); - usdhc_cfg[1 ].sdhc_clk =mxc_get_clock (MXC_ESDHC4_CLK ); - - usdhc_cfg[0 ].max_bus_width =4 ; - usdhc_cfg[1 ].max_bus_width =4 ; - -for (index =0 ; index <CONFIG_SYS_FSL_USDHC_NUM ; ++index) { -switch (index) { -case 0 : -SETUP_IOMUX_PADS (usdhc3_pads); -break ; -case 1 : -SETUP_IOMUX_PADS (usdhc4_pads); -break ; -default : -printf ("Warning: you configured more USDHC controllers" -"(%d) then supported by the board (%d)\n" , - index +1 ,CONFIG_SYS_FSL_USDHC_NUM ); -return -EINVAL ; - } - - ret =fsl_esdhc_initialize (bis, &usdhc_cfg[index]); -if (ret) -return ret; - } - -return 0 ; -} -#endif -#ifdef CONFIG_MXC_SPI int board_spi_cs_gpio (unsigned bus,unsigned cs) {
configs/mx6qsabrelite_defconfig +3 -0
@@ -28,6 +28,7 @@ CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y
@@ -55,6 +56,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MXC_SPI=y
Signature · 1 line
2.26.2
PATCH v2 1/1 Fix MMC access on Sabrelite
Quoted 10 lines · Martyn Welch
It appears that MMC access on the Sabrelite has been broken since
cdcaee9518:Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
Remove the
board_mmc_init()and related entries now that we should be usingDM_MMC, add PINCTRL so that things work as expected.Signed-off-by Martyn Welch <[email protected]>
Quoted 128 lines
---
Changes in v2:
- Removed now redundant mmc header.board/boundary/nitrogen6x/nitrogen6x.c | 72 -------------------------- configs/mx6qsabrelite_defconfig | 3 ++ 2 files changed, 3 insertions(+), 72 deletions(-)board/boundary/nitrogen6x/nitrogen6x.c +0
-72@@ -25,7 +25,6 @@#include <asm/mach-imx/spi.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/video.h> -#include <mmc.h> #include <fsl_esdhc_imx.h> #include <micrel.h> #include <miiphy.h> @@ -161,26 +160,6 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { -IOMUX_PAD_CTRL (SD3_CLK__SD3_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_CMD__SD3_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT0__SD3_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT1__SD3_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT2__SD3_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT3__SD3_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT5__GPIO7_IO00 ,NO_PAD_CTRL ),/* CD */ -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { -IOMUX_PAD_CTRL (SD4_CLK__SD4_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_CMD__SD4_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT0__SD4_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT1__SD4_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT2__SD4_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT3__SD4_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (NANDF_D6__GPIO2_IO06 ,NO_PAD_CTRL ),/* CD */ -}; -static iomux_v3_cfg_t const enet_pads1[] = {IOMUX_PAD_CTRL (ENET_MDIO__ENET_MDIO ,ENET_PAD_CTRL ),IOMUX_PAD_CTRL (ENET_MDC__ENET_MDC ,ENET_PAD_CTRL ),@@ -305,57 +284,6 @@ int board_ehci_power(int port, int on)#endif -#ifdef CONFIG_FSL_ESDHC_IMX -static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { - {USDHC3_BASE_ADDR }, - {USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd (struct mmc *mmc) -{ -struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; -int gp_cd = (cfg->esdhc_base ==USDHC3_BASE_ADDR ) ?IMX_GPIO_NR (7 ,0 ) : -IMX_GPIO_NR (2 ,6 ); - -gpio_direction_input (gp_cd); -return !gpio_get_value (gp_cd); -} - -int board_mmc_init (bd_t *bis) -{ -int ret; -u32 index =0 ; - - usdhc_cfg[0 ].sdhc_clk =mxc_get_clock (MXC_ESDHC3_CLK ); - usdhc_cfg[1 ].sdhc_clk =mxc_get_clock (MXC_ESDHC4_CLK ); - - usdhc_cfg[0 ].max_bus_width =4 ; - usdhc_cfg[1 ].max_bus_width =4 ; - -for (index =0 ; index <CONFIG_SYS_FSL_USDHC_NUM ; ++index) { -switch (index) { -case 0 : -SETUP_IOMUX_PADS (usdhc3_pads); -break ; -case 1 : -SETUP_IOMUX_PADS (usdhc4_pads); -break ; -default : -printf ("Warning: you configured more USDHC controllers" -"(%d) then supported by the board (%d)\n" , - index +1 ,CONFIG_SYS_FSL_USDHC_NUM ); -return -EINVAL ; - } - - ret =fsl_esdhc_initialize (bis, &usdhc_cfg[index]); -if (ret) -return ret; - } - -return 0 ; -} -#endif -#ifdef CONFIG_MXC_SPI int board_spi_cs_gpio (unsigned bus,unsigned cs) {configs/mx6qsabrelite_defconfig +3
-0@@ -28,6 +28,7 @@ CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y@@ -55,6 +56,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MXC_SPI=y
PATCH v2 1/1 Fix MMC access on Sabrelite
In reply to Martyn Welch[Adding Stefano]
Quoted 11 lines · Martyn Welch
It appears that MMC access on the Sabrelite has been broken since
cdcaee9518:Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
Remove the
board_mmc_init()and related entries now that we should be usingDM_MMC, add PINCTRL so that things work as expected.Signed-off-by Martyn Welch <[email protected]>
PATCH v2 1/1 Fix MMC access on Sabrelite
In reply to Martyn WelchQuoted 130 lines · Martyn Welch
It appears that MMC access on the Sabrelite has been broken since
cdcaee9518:Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
Remove the
board_mmc_init()and related entries now that we should be usingDM_MMC, add PINCTRL so that things work as expected.Signed-off-by Martyn Welch <[email protected]>---
Changes in v2:
- Removed now redundant mmc header.board/boundary/nitrogen6x/nitrogen6x.c | 72 -------------------------- configs/mx6qsabrelite_defconfig | 3 ++ 2 files changed, 3 insertions(+), 72 deletions(-)board/boundary/nitrogen6x/nitrogen6x.c +0
-72@@ -25,7 +25,6 @@#include <asm/mach-imx/spi.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/video.h> -#include <mmc.h> #include <fsl_esdhc_imx.h> #include <micrel.h> #include <miiphy.h> @@ -161,26 +160,6 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { -IOMUX_PAD_CTRL (SD3_CLK__SD3_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_CMD__SD3_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT0__SD3_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT1__SD3_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT2__SD3_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT3__SD3_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT5__GPIO7_IO00 ,NO_PAD_CTRL ),/* CD */ -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { -IOMUX_PAD_CTRL (SD4_CLK__SD4_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_CMD__SD4_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT0__SD4_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT1__SD4_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT2__SD4_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT3__SD4_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (NANDF_D6__GPIO2_IO06 ,NO_PAD_CTRL ),/* CD */ -}; -static iomux_v3_cfg_t const enet_pads1[] = {IOMUX_PAD_CTRL (ENET_MDIO__ENET_MDIO ,ENET_PAD_CTRL ),IOMUX_PAD_CTRL (ENET_MDC__ENET_MDC ,ENET_PAD_CTRL ),@@ -305,57 +284,6 @@ int board_ehci_power(int port, int on)#endif -#ifdef CONFIG_FSL_ESDHC_IMX -static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { - {USDHC3_BASE_ADDR }, - {USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd (struct mmc *mmc) -{ -struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; -int gp_cd = (cfg->esdhc_base ==USDHC3_BASE_ADDR ) ?IMX_GPIO_NR (7 ,0 ) : -IMX_GPIO_NR (2 ,6 ); - -gpio_direction_input (gp_cd); -return !gpio_get_value (gp_cd); -} - -int board_mmc_init (bd_t *bis) -{ -int ret; -u32 index =0 ; - - usdhc_cfg[0 ].sdhc_clk =mxc_get_clock (MXC_ESDHC3_CLK ); - usdhc_cfg[1 ].sdhc_clk =mxc_get_clock (MXC_ESDHC4_CLK ); - - usdhc_cfg[0 ].max_bus_width =4 ; - usdhc_cfg[1 ].max_bus_width =4 ; - -for (index =0 ; index <CONFIG_SYS_FSL_USDHC_NUM ; ++index) { -switch (index) { -case 0 : -SETUP_IOMUX_PADS (usdhc3_pads); -break ; -case 1 : -SETUP_IOMUX_PADS (usdhc4_pads); -break ; -default : -printf ("Warning: you configured more USDHC controllers" -"(%d) then supported by the board (%d)\n" , - index +1 ,CONFIG_SYS_FSL_USDHC_NUM ); -return -EINVAL ; - } - - ret =fsl_esdhc_initialize (bis, &usdhc_cfg[index]); -if (ret) -return ret; - } - -return 0 ; -} -#endif -#ifdef CONFIG_MXC_SPI int board_spi_cs_gpio (unsigned bus,unsigned cs) {configs/mx6qsabrelite_defconfig +1
-0@@ -28,6 +28,7 @@ CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y
configs/mx6qsabrelite_defconfig CONFIG_PHYLIB=y · line 63
Quoted 8 lines
configs/mx6qsabrelite_defconfig +2
-0@@ -55,6 +56,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MXC_SPI=y
But for me, it worked both before and after this patch.
If you feel like sending a version 3, you can update these too.
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
Otherwise, I'll do it later
Thanks
Troy
PATCH v2 1/1 Fix MMC access on Sabrelite
Quoted 151 lines · Troy Kisky
Quoted 138 lines · Martyn Welch
It appears that MMC access on the Sabrelite has been broken since
cdcaee9518:Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environmentRemove the
board_mmc_init()and related entries now that we should be
usingDM_MMC, add PINCTRL so that things work as expected.Signed-off-by Martyn Welch <[email protected]>---
Changes in v2:
- Removed now redundant mmc header.board/boundary/nitrogen6x/nitrogen6x.c | 72 ---------------------- ---- configs/mx6qsabrelite_defconfig | 3 ++ 2 files changed, 3 insertions(+), 72 deletions(-)board/boundary/nitrogen6x/nitrogen6x.c +0
-31@@ -25,7 +25,6 @@#include <asm/mach-imx/spi.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/video.h> -#include <mmc.h> #include <fsl_esdhc_imx.h> #include <micrel.h> #include <miiphy.h> @@ -161,26 +160,6 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { -IOMUX_PAD_CTRL (SD3_CLK__SD3_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_CMD__SD3_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT0__SD3_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT1__SD3_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT2__SD3_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT3__SD3_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD3_DAT5__GPIO7_IO00 ,NO_PAD_CTRL ),/* CD */ -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { -IOMUX_PAD_CTRL (SD4_CLK__SD4_CLK ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_CMD__SD4_CMD ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT0__SD4_DATA0 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT1__SD4_DATA1 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT2__SD4_DATA2 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (SD4_DAT3__SD4_DATA3 ,USDHC_PAD_CTRL ), -IOMUX_PAD_CTRL (NANDF_D6__GPIO2_IO06 ,NO_PAD_CTRL ),/* CD */ -}; -static iomux_v3_cfg_t const enet_pads1[] = {IOMUX_PAD_CTRL (ENET_MDIO__ENET_MDIO ,ENET_PAD_CTRL ),IOMUX_PAD_CTRL (ENET_MDC__ENET_MDC ,ENET_PAD_CTRL ),@@ -305,57 +284,6 @@ int board_ehci_power(int port, int on)#endif -#ifdef CONFIG_FSL_ESDHC_IMX -static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { - {USDHC3_BASE_ADDR }, - {USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd (struct mmc *mmc) -{ -struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ?
IMX_GPIO_NR(7, 0):board/boundary/nitrogen6x/nitrogen6x.c +0
-27-IMX_GPIO_NR (2 ,6 ); - -gpio_direction_input (gp_cd); -return !gpio_get_value (gp_cd); -} - -int board_mmc_init (bd_t *bis) -{ -int ret; -u32 index =0 ; - - usdhc_cfg[0 ].sdhc_clk =mxc_get_clock (MXC_ESDHC3_CLK ); - usdhc_cfg[1 ].sdhc_clk =mxc_get_clock (MXC_ESDHC4_CLK ); - - usdhc_cfg[0 ].max_bus_width =4 ; - usdhc_cfg[1 ].max_bus_width =4 ; - -for (index =0 ; index <CONFIG_SYS_FSL_USDHC_NUM ; ++index) { -switch (index) { -case 0 : -SETUP_IOMUX_PADS (usdhc3_pads); -break ; -case 1 : -SETUP_IOMUX_PADS (usdhc4_pads); -break ; -default : - printf("Warning: you configured more USDHCcontrollers"
board/boundary/nitrogen6x/nitrogen6x.c +0
-1- "(%d) then supported by the board(%d)\n",
board/boundary/nitrogen6x/nitrogen6x.c +0
-13- index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return -EINVAL; - } - - ret =fsl_esdhc_initialize (bis, &usdhc_cfg[index]); -if (ret) -return ret; - } - -return 0 ; -} -#endif -#ifdef CONFIG_MXC_SPI int board_spi_cs_gpio (unsigned bus,unsigned cs) {configs/mx6qsabrelite_defconfig +1
-0@@ -28,6 +28,7 @@ CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=yconfigs/mx6qsabrelite_defconfig CONFIG_PHYLIB=y · line 63
Quoted 8 lines
configs/mx6qsabrelite_defconfig +2
-0@@ -55,6 +56,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_MXC_SPI=yTested-by Troy Kisky <[email protected]>Acked-by Troy Kisky <[email protected]>
Quoted 9 lines
But for me, it worked both before and after this patch.
If you feel like sending a version 3, you can update these too.
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
I don't have any of these devices to test so don't feel it's really suitable for me to update them.
Thanks,
Martyn
Quoted 5 lines
Otherwise, I'll do it later
Thanks
Troy
PATCH v2 1/1 Fix MMC access on Sabrelite
In reply to Martyn WelchQuoted 11 lines
It appears that MMC access on the Sabrelite has been broken since
cdcaee9518:
Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment Remove theboard_mmc_init()and related entries now that we should be usingDM_MMC, add PINCTRL so that things work as expected.Signed-off-by Martyn Welch <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Reviewed-by Fabio Estevam <[email protected]>Tested-by Troy Kisky <[email protected]>Acked-by Troy Kisky <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================