Skip to contentSkip to conversation

btrfs-progs: get rid of btrfs_raid_profile_table

PATCH In review Johannes Thumshirn 2 participants 6 messages Jun 23, 2020 Btrfs file system

lore
Share & tools
lore
#0 lore raw

cover btrfs-progs: get rid of btrfs_raid_profile_table

From: Johannes Thumshirn <[email protected]>

As promised here's the removal of btrfs_raid_profile_table which helped as a intermediate step to refactor the raid specific settings in block group creation in progs.

As Qu remindet me of the outstanding debts this morning, I decided to go ahead and pay my debt today.

It will not be the last refactoring round in this area though, as the btrfs-progs side and the kernel side still diverge a lot.

This series passes a full 'make test' run from btrfs-progs.

Johannes Thumshirn (4):
btrfs-progs: use sub_stripes property from btrfs_raid_attr
btrfs-progs: use minimal number of stripes from btrfs_raid_attr
btrfs-progs: remove unused btrfs_raid_profile::max_stripes
btrfs-progs: remove btrfs_raid_profile_table

 volumes.c | 71 +++++--------------------------------------------------
 1 file changed, 6 insertions(+), 65 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/4 btrfs-progs: use sub_stripes property from btrfs_raid_attr

From: Johannes Thumshirn <[email protected]>

Both btrfs_raid_attr and btrfs_raid_profile define the number of sub_stripes a raid type has.

Use the one from btrfs_raid_attr and get rid of the field in btrfs_raid_profile.

---
 volumes.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
volumes.c +1 -11
index 7c57d6cb..9d0eeed5 100644
@@ -1002,61 +1002,51 @@ static const struct btrfs_raid_profile {
 	int	num_stripes;
 	int	max_stripes;
 	int	min_stripes;
-	int	sub_stripes;
 } btrfs_raid_profile_table[BTRFS_NR_RAID_TYPES] = {
 	[BTRFS_RAID_RAID10] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 4,
-		.sub_stripes = 2,
 	},
 	[BTRFS_RAID_RAID1] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 2,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_RAID1C3] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 3,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_RAID1C4] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 4,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_DUP] = {
 		.num_stripes = 2,
 		.max_stripes = 0,
 		.min_stripes = 2,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_RAID0] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 2,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_SINGLE] = {
 		.num_stripes = 1,
 		.max_stripes = 0,
 		.min_stripes = 1,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_RAID5] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 2,
-		.sub_stripes = 1,
 	},
 	[BTRFS_RAID_RAID6] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
 		.min_stripes = 3,
-		.sub_stripes = 1,
 	},
 };
 
@@ -1067,7 +1057,7 @@ static void init_alloc_chunk_ctl(struct btrfs_fs_info *info,
 
 	ctl->num_stripes = btrfs_raid_profile_table[type].num_stripes;
 	ctl->min_stripes = btrfs_raid_profile_table[type].min_stripes;
-	ctl->sub_stripes = btrfs_raid_profile_table[type].sub_stripes;
+	ctl->sub_stripes = btrfs_raid_array[type].sub_stripes;
 	ctl->stripe_len = BTRFS_STRIPE_LEN;
 
 	switch (type) {
Signature · 1 line
2.26.2
#2 lore raw

PATCH 2/4 btrfs-progs: use minimal number of stripes from btrfs_raid_attr

In reply to Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

Both btrfs_raid_attr and btrfs_raid_profile define the minimal number of stripes for each raid profile.

The difference is in btrfs_raid_attr the number of stripes is called devs_min and in btrfs_raid_profile its called min_stripes.

---
 volumes.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)
volumes.c +4 -11
index 9d0eeed5..82d7a872 100644
@@ -1001,52 +1001,42 @@ error:
 static const struct btrfs_raid_profile {
 	int	num_stripes;
 	int	max_stripes;
-	int	min_stripes;
 } btrfs_raid_profile_table[BTRFS_NR_RAID_TYPES] = {
 	[BTRFS_RAID_RAID10] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 4,
 	},
 	[BTRFS_RAID_RAID1] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 2,
 	},
 	[BTRFS_RAID_RAID1C3] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 3,
 	},
 	[BTRFS_RAID_RAID1C4] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 4,
 	},
 	[BTRFS_RAID_DUP] = {
 		.num_stripes = 2,
 		.max_stripes = 0,
-		.min_stripes = 2,
 	},
 	[BTRFS_RAID_RAID0] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 2,
 	},
 	[BTRFS_RAID_SINGLE] = {
 		.num_stripes = 1,
 		.max_stripes = 0,
-		.min_stripes = 1,
 	},
 	[BTRFS_RAID_RAID5] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 2,
 	},
 	[BTRFS_RAID_RAID6] = {
 		.num_stripes = 0,
 		.max_stripes = 0,
-		.min_stripes = 3,
 	},
 };
 
@@ -1056,11 +1046,14 @@ static void init_alloc_chunk_ctl(struct btrfs_fs_info *info,
 	int type = ctl->type;
 
 	ctl->num_stripes = btrfs_raid_profile_table[type].num_stripes;
-	ctl->min_stripes = btrfs_raid_profile_table[type].min_stripes;
+	ctl->min_stripes = btrfs_raid_array[type].devs_min;
 	ctl->sub_stripes = btrfs_raid_array[type].sub_stripes;
 	ctl->stripe_len = BTRFS_STRIPE_LEN;
 
 	switch (type) {
+	case BTRFS_RAID_DUP:
+		ctl->min_stripes = 2;
+		break;
 	case BTRFS_RAID_RAID1:
 	case BTRFS_RAID_RAID1C3:
 	case BTRFS_RAID_RAID1C4:
Signature · 1 line
2.26.2
#3 lore raw

PATCH 3/4 btrfs-progs: remove unused btrfs_raid_profile::max_stripes

In reply to Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

The max_stripes value of btrfs_raid_profile_table is unused, so we can just remove it as well.

---
 volumes.c | 10 ----------
 1 file changed, 10 deletions(-)
volumes.c +0 -10
index 82d7a872..71c3735d 100644
@@ -1000,43 +1000,33 @@ error:
 
 static const struct btrfs_raid_profile {
 	int	num_stripes;
-	int	max_stripes;
 } btrfs_raid_profile_table[BTRFS_NR_RAID_TYPES] = {
 	[BTRFS_RAID_RAID10] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID1] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID1C3] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID1C4] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_DUP] = {
 		.num_stripes = 2,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID0] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_SINGLE] = {
 		.num_stripes = 1,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID5] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 	[BTRFS_RAID_RAID6] = {
 		.num_stripes = 0,
-		.max_stripes = 0,
 	},
 };
 
Signature · 1 line
2.26.2
#4 lore raw

PATCH 4/4 btrfs-progs: remove btrfs_raid_profile_table

In reply to Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

For SINGLE and DUP RAID profiles we can get the num_stripes values from btrfs_raid_attr::dev:stripes. For all other RAID profiles the value is calculated anyways.

As this was the last remaining member of the btrfs_raid_profile_table we can remove it as well.

---
 volumes.c | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)
volumes.c +1 -33
index 71c3735d..e8b4aad8 100644
@@ -998,44 +998,12 @@ error:
 				- 2 * sizeof(struct btrfs_chunk))	\
 				/ sizeof(struct btrfs_stripe) + 1)
 
-static const struct btrfs_raid_profile {
-	int	num_stripes;
-} btrfs_raid_profile_table[BTRFS_NR_RAID_TYPES] = {
-	[BTRFS_RAID_RAID10] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_RAID1] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_RAID1C3] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_RAID1C4] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_DUP] = {
-		.num_stripes = 2,
-	},
-	[BTRFS_RAID_RAID0] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_SINGLE] = {
-		.num_stripes = 1,
-	},
-	[BTRFS_RAID_RAID5] = {
-		.num_stripes = 0,
-	},
-	[BTRFS_RAID_RAID6] = {
-		.num_stripes = 0,
-	},
-};
-
 static void init_alloc_chunk_ctl(struct btrfs_fs_info *info,
 				 struct alloc_chunk_ctl *ctl)
 {
 	int type = ctl->type;
 
-	ctl->num_stripes = btrfs_raid_profile_table[type].num_stripes;
+	ctl->num_stripes = btrfs_raid_array[type].dev_stripes;
 	ctl->min_stripes = btrfs_raid_array[type].devs_min;
 	ctl->sub_stripes = btrfs_raid_array[type].sub_stripes;
 	ctl->stripe_len = BTRFS_STRIPE_LEN;
Signature · 1 line
2.26.2
#5 lore raw
In reply to Johannes Thumshirn
Quoted 11 lines · Johannes Thumshirn

From: Johannes Thumshirn <[email protected]>

As promised here's the removal of btrfs_raid_profile_table which helped as a intermediate step to refactor the raid specific settings in block group creation in progs.

As Qu remindet me of the outstanding debts this morning, I decided to go ahead and pay my debt today.

It will not be the last refactoring round in this area though, as the btrfs-progs side and the kernel side still diverge a lot.

Thanks, all look good. This level of granularity makes review easy and as said before, the intermediate patches are ok esp when the code diverged.