5.4.49-rc1 review
Subsystems (7)
Greg Kroah-Hartman
maintainercover 5.4.49-rc1 review
This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.49-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.49-rc1
Ahmed S. Darwish <[email protected]>
net: core: device_rename: Use rwsem instead of a seqcount
Thomas Gleixner <[email protected]>
sched/rt, net: Use CONFIG_PREEMPTION.patch
Paul Cercueil <[email protected]>
pwm: jz4740: Enhance precision in calculation of duty cycle
Alexander Sverdlin <[email protected]>
net: octeon: mgmt: Repair filling of RX ring
Chen Yu <[email protected]>
e1000e: Do not wake up the system via WOL if device wakeup is disabled
Jiri Olsa <[email protected]>
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
Masami Hiramatsu <[email protected]>
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
Vamshi K Sthambamkadi <[email protected]>
tracing/probe: Fix memleak in fetch_op_data operations
Eric Biggers <[email protected]>
crypto: algboss - don't wait during notifier callback
Herbert Xu <[email protected]>
crypto: algif_skcipher - Cap recv SG list at ctx->used
Harry Wentland <[email protected]>
Revert "drm/amd/display: disable dcn20 abm feature for bring up"
Imre Deak <[email protected]>
drm/i915/icl+: Fix hotplug interrupt disabling after storm detection
Denis Efremov <[email protected]>
drm/amd/display: Use kvfree() to free coeff in build_regamma()
Jeykumar Sankaran <[email protected]>
drm/connector: notify userspace on hotplug after register complete
Chris Wilson <[email protected]>
drm/i915: Whitelist context-local timestamp in the gen9 cmdparser
Chris Wilson <[email protected]>
drm/i915/gem: Avoid iterating an empty list
Jordan Crouse <[email protected]>
drm/msm: Check for powered down HW in the devfreq callbacks
Imre Deak <[email protected]>
drm/i915: Fix AUX power domain toggling across TypeC mode resets
Dmitry V. Levin <[email protected]>
s390: fix syscall_get_error for compat processes
Eric Biggers <[email protected]>
f2fs: avoid utf8_strncasecmp() with unstable name
Eric Biggers <[email protected]>
f2fs: split f2fs_d_compare() from f2fs_match_name()
Denis Efremov <[email protected]>
net/mlx5: DR, Fix freeing in dr_create_rc_qp()
Ahmed S. Darwish <[email protected]>
block: nr_sects_write(): Disable preemption on seqcount write
Ard Biesheuvel <[email protected]>
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
Ville Syrjälä <[email protected]>
drm/amd/display: Use swap() where appropriate
Lyude Paul <[email protected]>
drm/dp_mst: Increase ACT retry timeout to 3s
Theodore Ts'o <[email protected]>
ext4: avoid race conditions when remounting with options that change dax
zhangyi (F) <[email protected]>
jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()
Tom Rix <[email protected]>
selinux: fix double free
Sandeep Raghuraman <[email protected]>
drm/amdgpu: Replace invalid device ID with a valid device ID
Huacai Chen <[email protected]>
drm/qxl: Use correct notify port address when creating cursor ring
Lyude Paul <[email protected]>
drm/dp_mst: Reformat drm_dp_check_act_status() a bit
Eric Biggers <[email protected]>
ext4: avoid utf8_strncasecmp() with unstable name
Jeffle Xu <[email protected]>
ext4: fix partial cluster initialization when splitting extent
Wolfram Sang <[email protected]>
drm: encoder_slave: fix refcouting error for modules
Kai-Heng Feng <[email protected]>
libata: Use per port sync for detach
Will Deacon <[email protected]>
arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
Sven Auhagen <[email protected]>
mvpp2: remove module bugfix
Jason Yan <[email protected]>
block: Fix use-after-free in blkdev_get()
Dinghao Liu <[email protected]>
scsi: ufs-bsg: Fix runtime PM imbalance on error
Vasundhara Volam <[email protected]>
bnxt_en: Return from timer if interface is not in open state.
David Howells <[email protected]>
afs: Fix the mapping of the UAEOVERFLOW abort code
David Howells <[email protected]>
afs: Set error flag rather than return error from file status decode
David Howells <[email protected]>
afs: Always include dir in bulk status fetch from afs_do_lookup()
David Howells <[email protected]>
afs: Fix EOF corruption
David Howells <[email protected]>
afs: afs_write_end() should change i_size under the right lock
David Howells <[email protected]>
afs: Fix non-setting of mtime when writing into mmap
Aneesh Kumar K.V <[email protected]>
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
Zhiqiang Liu <[email protected]>
bcache: fix potential deadlock problem in btree_gc_coalesce
yangerkun <[email protected]>
ext4: stop overwrite the errcode in ext4_setup_super
Hongbo Yao <[email protected]>
perf stat: Fix NULL pointer dereference
Gaurav Singh <[email protected]>
perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()
Qais Yousef <[email protected]>
usb/ehci-platform: Set PM runtime as active on resume
Yoshihiro Shimoda <[email protected]>
usb: host: ehci-platform: add a quirk to avoid stuck
Qais Yousef <[email protected]>
usb/xhci-plat: Set PM runtime as active on resume
Andrey Ignatov <[email protected]>
bpf: Fix memlock accounting for sock_hash
Brett Creeley <[email protected]>
iavf: fix speed reporting over virtchnl
Li RongQing <[email protected]>
xdp: Fix xsk_generic_xmit errno
Zheng Bin <[email protected]>
nfs: set invalid blocks after NFSv4 writes
Christoph Hellwig <[email protected]>
nvme-pci: use simple suspend when a HMB is enabled
YiFei Zhu <[email protected]>
net/filter: Permit reading NET in load_bytes_relative when MAC not set
Vitaly Kuznetsov <[email protected]>
x86/idt: Keep spurious entries unset in system_vectors
Christophe JAILLET <[email protected]>
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
Andrii Nakryiko <[email protected]>
libbpf: Handle GCC noreturn-turned-volatile quirk
Jernej Skrabec <[email protected]>
drm/sun4i: hdmi ddc clk: Fix size of m divider
Jean-Philippe Brucker <[email protected]>
tracing/probe: Fix bpf_task_fd_query() for kprobes and uprobes
Jakub Sitnicki <[email protected]>
bpf, sockhash: Synchronize delete from bucket list on map free
dihu <[email protected]>
bpf/sockmap: Fix kernel panic at __tcp_bpf_recvmsg
Hans de Goede <[email protected]>
ASoC: rt5645: Add platform-data for Asus T101HA
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet
Pierre-Louis Bossart <[email protected]>
ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
Bard Liao <[email protected]>
ASoC: core: only convert non DPCM link to DPCM link
Zhihao Cheng <[email protected]>
afs: Fix memory leak in afs_put_sysnames()
Eric Biggers <[email protected]>
f2fs: don't return vmalloc() memory from f2fs_kmalloc()
tannerlove <[email protected]>
selftests/net: in timestamping, strncpy needs to preserve null byte
Shaokun Zhang <[email protected]>
drivers/perf: hisi: Fix wrong value for all counters enable
Max Staudt <[email protected]>
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
Logan Gunthorpe <[email protected]>
NTB: ntb_test: Fix bug when counting remote files
Logan Gunthorpe <[email protected]>
NTB: perf: Fix race condition when run with ntb_test
Logan Gunthorpe <[email protected]>
NTB: perf: Fix support for hardware that doesn't have port numbers
Logan Gunthorpe <[email protected]>
NTB: perf: Don't require one more memory window than number of peers
Logan Gunthorpe <[email protected]>
NTB: Revert the change to use the NTB device dev for DMA allocations
Logan Gunthorpe <[email protected]>
NTB: ntb_tool: reading the link file should not end in a NULL byte
Sanjay R Mehta <[email protected]>
ntb_tool: pass correct struct device to dma_alloc_coherent
Sanjay R Mehta <[email protected]>
ntb_perf: pass correct struct device to dma_alloc_coherent
Dan Murphy <[email protected]>
net: marvell: Fix OF_MDIO config check
Bob Peterson <[email protected]>
gfs2: fix use-after-free on transaction ail lists
Chaitanya Kulkarni <[email protected]>
blktrace: fix endianness for blk_log_remap()
Chaitanya Kulkarni <[email protected]>
blktrace: fix endianness in get_pdu_int()
Chaitanya Kulkarni <[email protected]>
blktrace: use errno instead of bi_status
Ram Pai <[email protected]>
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
Arnd Bergmann <[email protected]>
include/linux/bitops.h: avoid clang shift-count-overflow warnings
Jann Horn <[email protected]>
lib/zlib: remove outdated and incorrect pre-increment optimization
Jiri Benc <[email protected]>
geneve: change from tx_error to tx_dropped on missing metadata
Tero Kristo <[email protected]>
crypto: omap-sham - add proper load balancing support for multicore
Nicholas Kazlauskas <[email protected]>
drm/amd/display: Revalidate bandwidth before commiting DC updates
J. Bruce Fields <[email protected]>
nfsd: safer handling of corrupted c_type
Christophe JAILLET <[email protected]>
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
Christophe JAILLET <[email protected]>
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
Christophe JAILLET <[email protected]>
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
Can Guo <[email protected]>
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
Qiushi Wu <[email protected]>
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
Bob Peterson <[email protected]>
gfs2: Allow lock_nolock mount to specify jid=X
J. Bruce Fields <[email protected]>
nfsd4: make drc_slab global, not per-net
Luis Henriques <[email protected]>
ceph: don't return -ESTALE if there's still an open file
Ben Skeggs <[email protected]>
drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection
Stafford Horne <[email protected]>
openrisc: Fix issue with argument clobbering for clone/fork
David Howells <[email protected]>
rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID
Wei Yongjun <[email protected]>
mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
Chuhong Yuan <[email protected]>
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
Qiushi Wu <[email protected]>
vfio/mdev: Fix reference count leak in add_mdev_supported_type
Xiyu Yang <[email protected]>
ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed
Christophe JAILLET <[email protected]>
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
huhai <[email protected]>
powerpc/4xx: Don't unmap NULL mbase
Nathan Chancellor <[email protected]>
input: i8042 - Remove special PowerPC handling
Dan Carpenter <[email protected]>
of: Fix a refcounting bug in __of_attach_node_sysfs()
Olga Kornievskaia <[email protected]>
NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION
Fedor Tokarev <[email protected]>
net: sunrpc: Fix off-by-one issues in 'rpc_ntop6'
Dan Williams <[email protected]>
/dev/mem: Revoke mappings when a driver claims the region
John Hubbard <[email protected]>
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
Eddie James <[email protected]>
clk: ast2600: Fix AHB clock divider for A1
Chunyan Zhang <[email protected]>
clk: sprd: return correct type of value for _sprd_pll_recalc_rate
Qian Cai <[email protected]>
KVM: PPC: Book3S: Fix some RCU-list locks
Qian Cai <[email protected]>
KVM: PPC: Book3S HV: Ignore kmemleak false positives
Jeffrey Hugo <[email protected]>
scsi: ufs-qcom: Fix scheduling while atomic issue
Nathan Chancellor <[email protected]>
clk: bcm2835: Fix return type of bcm2835_register_gate
Dan Carpenter <[email protected]>
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
Qiushi Wu <[email protected]>
ASoC: fix incomplete error-handling in img_i2s_in_probe.
Christophe Leroy <[email protected]>
powerpc/32s: Don't warn when mapping RO data ROX.
Amelie Delaunay <[email protected]>
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
Amelie Delaunay <[email protected]>
mfd: stmfx: Fix stmfx_irq_init error path
Amelie Delaunay <[email protected]>
mfd: stmfx: Reset chip on resume as supply was disabled
Borislav Petkov <[email protected]>
x86/apic: Make TSC deadline timer detection message visible
Potnuri Bharat Teja <[email protected]>
RDMA/iw_cxgb4: cleanup device debugfs entries on ULD remove
Siddharth Gupta <[email protected]>
scripts: headers_install: Exit with error on config leak
Pawel Laszczak <[email protected]>
usb: gadget: Fix issue with config_ep_by_speed function
Qiushi Wu <[email protected]>
usb: gadget: fix potential double-free in m66592_probe.
Colin Ian King <[email protected]>
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
Nathan Chancellor <[email protected]>
USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke
Fabrice Gasnier <[email protected]>
usb: dwc2: gadget: move gadget resume after the core is in L0 state
Stefan Riedmueller <[email protected]>
watchdog: da9062: No need to ping manually before setting timeout
Maor Gottlieb <[email protected]>
IB/cma: Fix ports memory leak in cma_configfs
Marc Zyngier <[email protected]>
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
Marc Zyngier <[email protected]>
PCI: dwc: Fix inner MSI IRQ domain registration
Bjorn Helgaas <[email protected]>
PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port
Hannes Reinecke <[email protected]>
dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zone
Qian Cai <[email protected]>
powerpc/64s/pgtable: fix an undefined behaviour
Vidya Sagar <[email protected]>
arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
Jon Hunter <[email protected]>
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
Miklos Szeredi <[email protected]>
fuse: copy_file_range should truncate cache
Miklos Szeredi <[email protected]>
fuse: fix copy_file_range cache issues
Wei Yongjun <[email protected]>
firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
Bodo Stroesser <[email protected]>
scsi: target: tcmu: Userspace must not complete queued commands
Lang Cheng <[email protected]>
RDMA/hns: Fix cmdq parameter of querying pf timer resource
Lijun Ou <[email protected]>
RDMA/hns: Bugfix for querying qkey
Marek Szyprowski <[email protected]>
clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
Souptick Joarder <[email protected]>
fpga: dfl: afu: Corrected error handling levels
Gregory CLEMENT <[email protected]>
tty: n_gsm: Fix bogus i++ in gsm_data_kick
Tang Bin <[email protected]>
USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet
Roy Spliet <[email protected]>
drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
Qais Yousef <[email protected]>
usb/ohci-platform: Fix a warning when hibernating
Alex Williamson <[email protected]>
vfio-pci: Mask cap zero
Geoff Levand <[email protected]>
powerpc/ps3: Fix kexec shutdown hang
Bharat Gooty <[email protected]>
drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
Nicholas Piggin <[email protected]>
powerpc/pseries/ras: Fix FWNMI_VALID off by one
Nicholas Piggin <[email protected]>
powerpc/64s/exception: Fix machine check no-loss idle wakeup
Feng Tang <[email protected]>
ipmi: use vzalloc instead of kmalloc for user creation
Oded Gabbay <[email protected]>
habanalabs: increase timeout during reset
Mika Westerberg <[email protected]>
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
Cristian Klein <[email protected]>
HID: Add quirks for Trust Panora Graphic Tablet
Erwin Burema <[email protected]>
ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback
Gregory CLEMENT <[email protected]>
tty: n_gsm: Fix waking up upper tty layer when room available
Gregory CLEMENT <[email protected]>
tty: n_gsm: Fix SOF skipping
Michael Ellerman <[email protected]>
powerpc/64: Don't initialise init_task->thread.regs
Rob Herring <[email protected]>
PCI: Fix pci_register_host_bridge() device_register() error handling
Tero Kristo <[email protected]>
clk: ti: composite: fix memory leak
Wei Yongjun <[email protected]>
USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
Arnd Bergmann <[email protected]>
dlm: remove BUG() before panic()
Dafna Hirschfeld <[email protected]>
pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
Christophe JAILLET <[email protected]>
ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'
Christophe JAILLET <[email protected]>
ASoC: ux500: mop500: Fix some refcounted resources issues
Yongbo Zhang <[email protected]>
SoC: rsnd: add interrupt support for SSI BUSIF buffer
Suganath Prabu S <[email protected]>
scsi: mpt3sas: Fix double free warnings
Bodo Stroesser <[email protected]>
scsi: target: loopback: Fix READ with data and sensebytes
Loic Poulain <[email protected]>
arm64: dts: msm8996: Fix CSI IRQ types
Wei Yongjun <[email protected]>
ASoC: SOF: core: fix error return code in sof_probe_continue()
Dmitry Osipenko <[email protected]>
power: supply: smb347-charger: IRQSTAT_D is volatile
Christophe JAILLET <[email protected]>
power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix invalid assignment to union data for directional parameter
Viacheslav Dubeyko <[email protected]>
scsi: qla2xxx: Fix warning after FC target reset
Kai-Heng Feng <[email protected]>
PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges
Andrew Murray <[email protected]>
PCI: rcar: Fix incorrect programming of OB windows
Kuppuswamy Sathyanarayanan <[email protected]>
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
John Stultz <[email protected]>
serial: amba-pl011: Make sure we initialize the port.lock spinlock
Russell King <[email protected]>
i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output
Christophe JAILLET <[email protected]>
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
Matej Dujava <[email protected]>
staging: sm750fb: add missing case while setting FB_VISUAL
Oscar Carter <[email protected]>
staging: wilc1000: Increase the size of wid_list array
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Properly handle failed kick_transfer
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Properly handle ClearFeature(halt)
Arnd Bergmann <[email protected]>
HID: intel-ish-hid: avoid bogus uninitialized-variable warning
Pierre-Louis Bossart <[email protected]>
soundwire: slave: don't init debugfs on device registration error
Yong Zhi <[email protected]>
ASoC: max98373: reorder max98373_reset() in resume
Martin Blumenstingl <[email protected]>
clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
Sudip Mukherjee <[email protected]>
thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR
Uwe Kleine-König <[email protected]>
gpio: pca953x: fix handling of automatic address incrementing
Martin Blumenstingl <[email protected]>
clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bitsMartin Blumenstingl <[email protected]>
clk: meson: meson8b: Fix the polarity of the RESET_N lines
Martin Blumenstingl <[email protected]>
clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
Srinivas Kandagatla <[email protected]>
slimbus: ngd: get drvdata from correct device
Raghavendra Rao Ananta <[email protected]>
tty: hvc: Fix data abort due to race in hvc_open
Julian Wiedmann <[email protected]>
s390/qdio: put thinint indicator after early error
Stephan Gerhold <[email protected]>
Input: mms114 - add extra compatible for mms345l
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix racy list management in output queue
Alexander Tsoy <[email protected]>
ALSA: usb-audio: Improve frames size computation
Xiyu Yang <[email protected]>
staging: gasket: Fix mapping refcnt leak when register/store fails
Xiyu Yang <[email protected]>
staging: gasket: Fix mapping refcnt leak when put attribute fails
Christoph Hellwig <[email protected]>
firmware: qcom_scm: fix bogous abuse of dma-direct internals
Jonathan Marek <[email protected]>
arm64: dts: qcom: fix pm8150 gpio interrupts
Vivek Goyal <[email protected]>
virtiofs: schedule blocking async replies in separate worker
Jason Yan <[email protected]>
pinctrl: rza1: Fix wrong array assignment of rza1l_swio_entries
Chad Dupuis <[email protected]>
scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing
Andy Shevchenko <[email protected]>
gpio: dwapb: Append MODULE_ALIAS for platform driver
Yishai Hadas <[email protected]>
RDMA/mlx5: Fix udata response upon SRQ creation
Vincent Stehlé <[email protected]>
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
Amit Kucheria <[email protected]>
arm64: dts: qcom: msm8916: remove unit name for thermal trip points
Nilesh Javali <[email protected]>
scsi: qedi: Do not flush offload work if ARP not resolved
Hsin-Yi Wang <[email protected]>
arm64: dts: mt8173: fix unit name warnings
Aiman Najjar <[email protected]>
staging: rtl8712: fix multiline derefernce warnings
Chen Zhou <[email protected]>
staging: greybus: fix a missing-check bug in gb_lights_light_config()
Hans de Goede <[email protected]>
x86/purgatory: Disable various profiling and sanitizing options
John Johansen <[email protected]>
apparmor: fix nnp subset test for unconfined
Tyrel Datwyler <[email protected]>
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
Simon Arlott <[email protected]>
scsi: sr: Fix sr_probe() missing deallocate of device minor
Jakub Sitnicki <[email protected]>
bpf, sockhash: Fix memory leak when unlinking sockets in sock_hash_free
Pavel Machek (CIP) <[email protected]>
ASoC: meson: add missing free_irq() in error path
Chao Yu <[email protected]>
f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
Mauricio Faria de Oliveira <[email protected]>
apparmor: check/put label on apparmor_sk_clone_security()
Martin Blumenstingl <[email protected]>
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
John Johansen <[email protected]>
apparmor: fix introspection of of task mode for unconfined tasks
ashimida <[email protected]>
mksysmap: Fix the mismatch of '.L' symbols in System.map
Logan Gunthorpe <[email protected]>
NTB: Fix the default port and peer numbers for legacy drivers
Logan Gunthorpe <[email protected]>
NTB: ntb_pingpong: Choose doorbells based on port number
Wang Hai <[email protected]>
yam: fix possible memory leak in yam_init_driver
Will Deacon <[email protected]>
sparc32: mm: Don't try to free page-table pages if ctor() fails
Navid Emamdoost <[email protected]>
pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
Pingfan Liu <[email protected]>
powerpc/crashkernel: Take "mem=" option into account
John Stultz <[email protected]>
ASoC: qcom: q6asm-dai: kCFI fix
Paulo Alcantara <[email protected]>
cifs: set up next DFS target before generic_ip_connect()
Qiushi Wu <[email protected]>
RDMA/core: Fix several reference count leaks.
Jon Derrick <[email protected]>
PCI: vmd: Filter resource type bits from shadow register
Xiyu Yang <[email protected]>
nfsd: Fix svc_xprt refcnt leak when setup callback client failed
Kajol Jain <[email protected]>
powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run
Mark Zhang <[email protected]>
IB/mlx5: Fix DEVX support for MLX5_CMD_OP_INIT2INIT_QP command
Alain Volmat <[email protected]>
clk: clk-flexgen: fix clock-critical handling
Sudhakar Panneerselvam <[email protected]>
scsi: vhost: Notify TCM about the maximum sg entries supported per command
Xiyu Yang <[email protected]>
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
Quanyang Wang <[email protected]>
clk: zynqmp: fix memory leak in zynqmp_register_clocks
Dan Carpenter <[email protected]>
scsi: cxgb3i: Fix some leaks in init_act_open()
Marek Szyprowski <[email protected]>
mfd: wm8994: Fix driver operation if loaded as modules
Christophe Leroy <[email protected]>
powerpc/ptdump: Add _PAGE_COHERENT flag
Peter Chen <[email protected]>
usb: gadget: core: sync interrupt before unbind the udc
Andy Shevchenko <[email protected]>
gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
Christophe JAILLET <[email protected]>
m68k/PCI: Fix a memory leak in an error handling path
Jon Derrick <[email protected]>
PCI: pci-bridge-emul: Fix PCIe bit conflicts
Luo Jiaxing <[email protected]>
scsi: hisi_sas: Do not reset phy timer to wait for stray phy up
Aharon Landau <[email protected]>
RDMA/mlx5: Add init2init as a modify command
Sai Prakash Ranjan <[email protected]>
coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()
Qian Cai <[email protected]>
vfio/pci: fix memory leaks in alloc_perm_bits()
Andre Przywara <[email protected]>
arm64: dts: fvp/juno: Fix node address fields
Emmanuel Nicolet <[email protected]>
ps3disk: use the default segment boundary
Pali Rohár <[email protected]>
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
Andre Przywara <[email protected]>
arm64: dts: fvp: Fix GIC child nodes
Daniel Baluta <[email protected]>
ASoC: SOF: Do nothing when DSP PM callbacks are not set
Geert Uytterhoeven <[email protected]>
clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
Lars Povlsen <[email protected]>
pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
Andre Przywara <[email protected]>
arm64: dts: juno: Fix GIC child nodes
Marek Behún <[email protected]>
arm64: dts: armada-3720-turris-mox: fix SFP binding
Marek Behún <[email protected]>
arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes
Martin Wilck <[email protected]>
dm mpath: switch paths in dm_blk_ioctl() code path
Srinivas Kandagatla <[email protected]>
misc: fastrpc: fix potential fastrpc_invoke_ctx leak
Srinivas Kandagatla <[email protected]>
misc: fastrpc: Fix an incomplete memory release in fastrpc_rpmsg_probe()
Serge Semin <[email protected]>
serial: 8250: Fix max baud limit in generic 8250 port
Oliver Neukum <[email protected]>
usblp: poison URBs upon disconnect
Marek Szyprowski <[email protected]>
clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
Sibi Sankar <[email protected]>
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
Russell King <[email protected]>
i2c: pxa: clear all master action bits in i2c_pxa_stop_message()
Konstantin Khlebnikov <[email protected]>
f2fs: report delalloc reserve as non-free in statfs for project quota
Andreas Klinger <[email protected]>
iio: bmp280: fix compensation of humidity
Qiushi Wu <[email protected]>
rtc: mc13xxx: fix a double-unlock issue
Christophe Leroy <[email protected]>
powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT
Marco Felsch <[email protected]>
Input: edt-ft5x06 - fix get_default register write access
Viacheslav Dubeyko <[email protected]>
scsi: qla2xxx: Fix issue with adapter's stopping state
Ard Biesheuvel <[email protected]>
PCI: Allow pci_resize_resource() for devices on root bus
Dan Carpenter <[email protected]>
ALSA: isa/wavefront: prevent out of bounds write in ioctl
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek - Introduce polarity for micmute LED GPIO
Neil Armstrong <[email protected]>
arm64: dts: meson: fixup SCP sram nodes
Dan Carpenter <[email protected]>
scsi: qedi: Check for buffer overflow in qedi_set_path()
Johannes Thumshirn <[email protected]>
scsi: core: free sgtables in case command setup fails
Marek Vasut <[email protected]>
ARM: dts: stm32: Add missing ethernet PHY reset on AV96
Linus Walleij <[email protected]>
ARM: integrator: Add some Kconfig selections
Xiyu Yang <[email protected]>
ASoC: davinci-mcasp: Fix dma_chan refcnt leak when getting dma type
Yoshihiro Shimoda <[email protected]>
ARM: dts: renesas: Fix IOMMU device node names
Jon Hunter <[email protected]>
backlight: lp855x: Ensure regulators are disabled on probe failure
Shengjiu Wang <[email protected]>
ASoC: fsl_esai: Disable exception interrupt before scheduling tasklet
Bryan O'Donoghue <[email protected]>
clk: qcom: msm8916: Fix the address location of pll->config_reg
Alex Elder <[email protected]>
remoteproc: Fix IDR initialisation in rproc_alloc()
Andy Shevchenko <[email protected]>
iio: pressure: bmp280: Tolerate IRQ before registering
YueHaibing <[email protected]>
ASoC: SOF: imx8: Fix randbuild error
Adam Honse <[email protected]>
i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets
Dmitry Osipenko <[email protected]>
ASoC: tegra: tegra_wm8903: Support nvidia, headset property
Rikard Falkeborn <[email protected]>
clk: sunxi: Fix incorrect usage of round_down()
Enric Balletbo i Serra <[email protected]>
power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/dts/r8a7743.dtsi | 12 +- arch/arm/boot/dts/r8a7744.dtsi | 12 +- arch/arm/boot/dts/r8a7745.dtsi | 12 +- arch/arm/boot/dts/r8a7790.dtsi | 12 +- arch/arm/boot/dts/r8a7791.dtsi | 14 +- arch/arm/boot/dts/r8a7793.dtsi | 14 +- arch/arm/boot/dts/r8a7794.dtsi | 12 +- arch/arm/boot/dts/stm32mp157a-avenger96.dts | 3 + .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 10 +- arch/arm/mach-integrator/Kconfig | 7 +- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 10 +- arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi | 2 +- arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi | 8 +- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 92 ++++---- arch/arm64/boot/dts/arm/juno-base.dtsi | 50 ++--- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 6 +- .../boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 6 +- .../boot/dts/marvell/armada-3720-turris-mox.dts | 4 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 22 +- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 +- arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 +- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 +- arch/arm64/kernel/hw_breakpoint.c | 44 ++-- arch/m68k/coldfire/pci.c | 4 +- arch/openrisc/kernel/entry.S | 4 +- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/book3s/64/pgtable.h | 23 +- arch/powerpc/include/asm/processor.h | 1 - arch/powerpc/kernel/exceptions-64s.S | 14 +- arch/powerpc/kernel/head_64.S | 9 +- arch/powerpc/kernel/machine_kexec.c | 8 +- arch/powerpc/kernel/process.c | 20 +- arch/powerpc/kvm/book3s_64_mmu_radix.c | 16 +- arch/powerpc/kvm/book3s_64_vio.c | 18 +- arch/powerpc/mm/book3s32/mmu.c | 6 +- arch/powerpc/mm/ptdump/shared.c | 5 + arch/powerpc/perf/hv-24x7.c | 10 - arch/powerpc/platforms/4xx/pci.c | 4 +- arch/powerpc/platforms/ps3/mm.c | 22 +- arch/powerpc/platforms/pseries/ras.c | 5 +- arch/s390/include/asm/syscall.h | 12 +- arch/sparc/mm/srmmu.c | 1 - arch/x86/boot/Makefile | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/idt.c | 6 +- arch/x86/kernel/kprobes/core.c | 16 +- arch/x86/purgatory/Makefile | 5 +- crypto/algboss.c | 2 - crypto/algif_skcipher.c | 6 +- drivers/ata/libata-core.c | 11 +- drivers/base/platform.c | 2 + drivers/block/ps3disk.c | 1 - drivers/char/ipmi/ipmi_msghandler.c | 7 +- drivers/char/mem.c | 101 ++++++++- drivers/clk/bcm/clk-bcm2835.c | 10 +- drivers/clk/clk-ast2600.c | 31 ++- drivers/clk/meson/meson8b.c | 100 ++++++--- drivers/clk/meson/meson8b.h | 4 + drivers/clk/qcom/gcc-msm8916.c | 8 +- drivers/clk/renesas/renesas-cpg-mssr.c | 8 +- drivers/clk/samsung/clk-exynos5420.c | 16 +- drivers/clk/samsung/clk-exynos5433.c | 3 +- drivers/clk/sprd/pll.c | 2 +- drivers/clk/st/clk-flexgen.c | 1 + drivers/clk/sunxi/clk-sunxi.c | 2 +- drivers/clk/ti/composite.c | 1 + drivers/clk/zynqmp/clkc.c | 15 +- drivers/crypto/omap-sham.c | 64 +++--- drivers/extcon/extcon-adc-jack.c | 3 +- drivers/firmware/imx/imx-scu.c | 1 + drivers/firmware/qcom_scm.c | 9 +- drivers/fpga/dfl-afu-dma-region.c | 4 +- drivers/gpio/gpio-dwapb.c | 34 ++- drivers/gpio/gpio-pca953x.c | 44 ++-- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 11 +- drivers/gpu/drm/amd/display/dc/bios/bios_parser.c | 7 +- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 8 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 12 +- .../drm/amd/display/modules/color/color_gamma.c | 2 +- drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c | 2 +- drivers/gpu/drm/drm_connector.c | 5 + drivers/gpu/drm/drm_dp_mst_topology.c | 58 ++--- drivers/gpu/drm/drm_encoder_slave.c | 5 +- drivers/gpu/drm/drm_sysfs.c | 3 - drivers/gpu/drm/i915/display/intel_dp.c | 5 +- drivers/gpu/drm/i915/gem/i915_gem_shmem.c | 15 +- drivers/gpu/drm/i915/i915_cmd_parser.c | 4 + drivers/gpu/drm/i915/i915_irq.c | 1 + drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 6 + drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 8 + drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 + drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 3 +- .../gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c | 4 +- drivers/gpu/drm/qxl/qxl_kms.c | 2 +- drivers/gpu/drm/sun4i/sun4i_hdmi.h | 2 +- drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c | 2 +- drivers/hid/hid-ids.h | 3 + drivers/hid/hid-quirks.c | 1 + drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 2 + drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 +- drivers/i2c/busses/i2c-icy.c | 1 + drivers/i2c/busses/i2c-piix4.c | 3 +- drivers/i2c/busses/i2c-pxa.c | 13 +- drivers/iio/pressure/bmp280-core.c | 7 +- drivers/infiniband/core/cma_configfs.c | 13 ++ drivers/infiniband/core/sysfs.c | 10 +- drivers/infiniband/hw/cxgb4/device.c | 1 + drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 34 ++- drivers/infiniband/hw/mlx5/devx.c | 5 + drivers/infiniband/hw/mlx5/srq.c | 10 +- drivers/input/serio/i8042-ppcio.h | 57 ----- drivers/input/serio/i8042.h | 2 - drivers/input/touchscreen/edt-ft5x06.c | 12 +- drivers/input/touchscreen/mms114.c | 17 +- drivers/mailbox/zynqmp-ipi-mailbox.c | 20 +- drivers/md/bcache/btree.c | 8 +- drivers/md/dm-mpath.c | 2 +- drivers/md/dm-zoned-metadata.c | 4 +- drivers/md/dm-zoned-reclaim.c | 4 +- drivers/mfd/stmfx.c | 22 +- drivers/mfd/wm8994-core.c | 1 + drivers/misc/fastrpc.c | 13 +- drivers/misc/habanalabs/habanalabs.h | 2 +- drivers/misc/xilinx_sdfec.c | 27 ++- drivers/net/dsa/lantiq_gswip.c | 3 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 5 + drivers/net/ethernet/intel/e1000e/netdev.c | 14 +- drivers/net/ethernet/intel/iavf/iavf.h | 14 ++ drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 14 +- drivers/net/ethernet/intel/iavf/iavf_main.c | 25 ++- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 88 +++++++- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 7 +- .../ethernet/mellanox/mlx5/core/steering/dr_send.c | 2 +- drivers/net/geneve.c | 7 +- drivers/net/hamradio/yam.c | 1 + drivers/net/phy/marvell.c | 2 +- drivers/ntb/core.c | 9 +- drivers/ntb/test/ntb_perf.c | 30 ++- drivers/ntb/test/ntb_pingpong.c | 14 +- drivers/ntb/test/ntb_tool.c | 9 +- drivers/nvme/host/pci.c | 6 + drivers/of/kobj.c | 3 +- drivers/pci/controller/dwc/pci-meson.c | 4 +- drivers/pci/controller/dwc/pcie-designware-host.c | 2 + drivers/pci/controller/pci-aardvark.c | 4 - drivers/pci/controller/pci-v3-semi.c | 2 +- drivers/pci/controller/pcie-rcar.c | 9 +- drivers/pci/controller/vmd.c | 6 +- drivers/pci/pci-bridge-emul.c | 6 +- drivers/pci/pci.c | 30 ++- drivers/pci/pcie/aspm.c | 10 - drivers/pci/pcie/ptm.c | 22 +- drivers/pci/probe.c | 5 +- drivers/pci/setup-res.c | 9 +- drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 2 +- drivers/phy/broadcom/phy-bcm-sr-usb.c | 55 +---- drivers/pinctrl/freescale/pinctrl-imx.c | 26 +-- drivers/pinctrl/freescale/pinctrl-imx1-core.c | 1 - drivers/pinctrl/pinctrl-ocelot.c | 3 +- drivers/pinctrl/pinctrl-rockchip.c | 7 +- drivers/pinctrl/pinctrl-rza1.c | 2 +- drivers/power/supply/Kconfig | 2 +- drivers/power/supply/lp8788-charger.c | 18 +- drivers/power/supply/smb347-charger.c | 1 + drivers/pwm/pwm-img.c | 8 +- drivers/pwm/pwm-jz4740.c | 4 +- drivers/remoteproc/qcom_q6v5_mss.c | 31 ++- drivers/remoteproc/remoteproc_core.c | 3 +- drivers/rtc/rtc-mc13xxx.c | 4 +- drivers/rtc/rtc-rv3028.c | 2 + drivers/s390/cio/qdio.h | 1 - drivers/s390/cio/qdio_setup.c | 1 - drivers/s390/cio/qdio_thinint.c | 14 +- drivers/scsi/arm/acornscsi.c | 4 +- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 18 +- drivers/scsi/hisi_sas/hisi_sas_main.c | 5 +- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 + drivers/scsi/iscsi_boot_sysfs.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 2 + drivers/scsi/mpt3sas/mpt3sas_base.c | 2 + drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 35 ++- drivers/scsi/qedi/qedi_iscsi.c | 7 +- drivers/scsi/qla2xxx/qla_os.c | 1 + drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 + drivers/scsi/scsi_lib.c | 16 +- drivers/scsi/sr.c | 6 +- drivers/scsi/ufs/ufs-qcom.c | 6 +- drivers/scsi/ufs/ufs_bsg.c | 4 +- drivers/scsi/ufs/ufshcd.c | 1 - drivers/slimbus/qcom-ngd-ctrl.c | 4 +- drivers/soundwire/slave.c | 2 + drivers/staging/gasket/gasket_sysfs.c | 2 + drivers/staging/greybus/light.c | 3 +- drivers/staging/rtl8712/rtl871x_xmit.c | 11 +- drivers/staging/sm750fb/sm750.c | 1 + drivers/staging/wilc1000/wilc_hif.c | 4 +- drivers/target/loopback/tcm_loop.c | 36 ++- drivers/target/target_core_user.c | 154 ++++++------- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +- drivers/tty/hvc/hvc_console.c | 16 +- drivers/tty/n_gsm.c | 26 ++- drivers/tty/serial/8250/8250_port.c | 4 +- drivers/tty/serial/amba-pl011.c | 1 + drivers/usb/class/usblp.c | 5 +- drivers/usb/dwc2/core_intr.c | 7 +- drivers/usb/dwc3/gadget.c | 60 ++++- drivers/usb/gadget/composite.c | 78 +++++-- drivers/usb/gadget/udc/core.c | 2 + drivers/usb/gadget/udc/lpc32xx_udc.c | 11 +- drivers/usb/gadget/udc/m66592-udc.c | 2 +- drivers/usb/gadget/udc/s3c2410_udc.c | 4 - drivers/usb/host/ehci-mxc.c | 2 + drivers/usb/host/ehci-platform.c | 131 +++++++++++ drivers/usb/host/ohci-platform.c | 5 + drivers/usb/host/ohci-sm501.c | 7 +- drivers/usb/host/xhci-plat.c | 10 +- drivers/vfio/mdev/mdev_sysfs.c | 2 +- drivers/vfio/pci/vfio_pci_config.c | 14 +- drivers/vhost/scsi.c | 1 + drivers/video/backlight/lp855x_bl.c | 20 +- drivers/watchdog/da9062_wdt.c | 5 - fs/afs/dir.c | 9 +- fs/afs/fsclient.c | 88 +++----- fs/afs/inode.c | 12 +- fs/afs/internal.h | 1 + fs/afs/misc.c | 1 + fs/afs/proc.c | 1 + fs/afs/rxrpc.c | 4 + fs/afs/write.c | 5 +- fs/afs/yfsclient.c | 85 +++---- fs/block_dev.c | 12 +- fs/ceph/export.c | 9 +- fs/cifs/connect.c | 18 +- fs/dlm/dlm_internal.h | 1 - fs/ext4/dir.c | 16 ++ fs/ext4/extents.c | 2 +- fs/ext4/super.c | 23 +- fs/f2fs/checkpoint.c | 4 +- fs/f2fs/dir.c | 80 ++++--- fs/f2fs/f2fs.h | 13 +- fs/f2fs/file.c | 9 +- fs/f2fs/node.c | 8 +- fs/f2fs/super.c | 5 +- fs/fuse/file.c | 43 +++- fs/fuse/fuse_i.h | 1 + fs/fuse/virtio_fs.c | 106 ++++++--- fs/gfs2/log.c | 11 +- fs/gfs2/ops_fstype.c | 2 +- fs/jbd2/journal.c | 103 ++++----- fs/nfs/inode.c | 14 +- fs/nfs/nfs4proc.c | 2 +- fs/nfsd/cache.h | 2 + fs/nfsd/netns.h | 1 - fs/nfsd/nfs4callback.c | 2 + fs/nfsd/nfscache.c | 32 +-- fs/nfsd/nfsctl.c | 6 + include/linux/bitops.h | 2 +- include/linux/genhd.h | 2 + include/linux/ioport.h | 6 + include/linux/jbd2.h | 1 - include/linux/kprobes.h | 4 + include/linux/libata.h | 3 + include/linux/mfd/stmfx.h | 1 + include/linux/nfs_fs.h | 1 + include/linux/usb/composite.h | 3 + include/linux/usb/ehci_def.h | 2 +- include/linux/usb/gadget.h | 2 + include/uapi/linux/magic.h | 1 + kernel/kprobes.c | 27 ++- kernel/resource.c | 5 + kernel/trace/blktrace.c | 30 +-- kernel/trace/trace_kprobe.c | 2 +- kernel/trace/trace_probe.c | 4 +- kernel/trace/trace_uprobe.c | 2 +- lib/zlib_inflate/inffast.c | 91 +++----- net/core/dev.c | 40 ++-- net/core/filter.c | 16 +- net/core/sock_map.c | 28 ++- net/ipv4/tcp_bpf.c | 3 + net/rxrpc/proc.c | 6 +- net/sunrpc/addr.c | 4 +- net/xdp/xsk.c | 4 +- scripts/headers_install.sh | 11 +- scripts/mksysmap | 2 +- security/apparmor/domain.c | 9 +- security/apparmor/include/label.h | 1 + security/apparmor/label.c | 37 +++- security/apparmor/lsm.c | 5 + security/selinux/ss/services.c | 4 + sound/firewire/amdtp-am824.c | 3 +- sound/isa/wavefront/wavefront_synth.c | 8 +- sound/pci/hda/patch_realtek.c | 14 +- sound/soc/codecs/max98373.c | 2 +- sound/soc/codecs/rt5645.c | 14 ++ sound/soc/fsl/fsl_asrc_dma.c | 1 + sound/soc/fsl/fsl_esai.c | 4 + sound/soc/img/img-i2s-in.c | 1 + sound/soc/intel/boards/bytcr_rt5640.c | 24 ++ sound/soc/meson/axg-fifo.c | 10 +- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +- sound/soc/sh/rcar/gen.c | 8 + sound/soc/sh/rcar/rsnd.h | 9 + sound/soc/sh/rcar/ssi.c | 145 ++++++++++++ sound/soc/soc-core.c | 22 +- sound/soc/sof/core.c | 1 + sound/soc/sof/imx/Kconfig | 2 +- sound/soc/sof/nocodec.c | 6 +- sound/soc/sof/pm.c | 10 +- sound/soc/tegra/tegra_wm8903.c | 6 +- sound/soc/ti/davinci-mcasp.c | 4 +- sound/soc/ti/omap-mcbsp.c | 8 +- sound/soc/ux500/mop500.c | 11 +- sound/usb/card.h | 5 + sound/usb/endpoint.c | 244 ++++++++++++++++++++- sound/usb/endpoint.h | 1 + sound/usb/pcm.c | 7 + tools/lib/bpf/btf_dump.c | 33 ++- tools/perf/builtin-report.c | 3 +- tools/perf/util/stat-display.c | 4 +- .../networking/timestamping/timestamping.c | 10 +- tools/testing/selftests/ntb/ntb_test.sh | 2 +- tools/testing/selftests/x86/protection_keys.c | 3 +- 332 files changed, 2988 insertions(+), 1666 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/314 power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
From: Enric Balletbo i Serra <[email protected]>
[ Upstream commit 87c3d579c8ed0eaea6b1567d529a8daa85a2bc6c ]
regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it. Depending on REGMAP_I2C makes this driver only build if another driver already selected REGMAP_I2C, as the symbol can't be selected through the menu kernel configuration.
--- drivers/power/supply/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/supply/Kconfig +1 -1
@@ -577,7 +577,7 @@ config CHARGER_BQ24257 tristate "TI BQ24250/24251/24257 battery charger driver" depends on I2C depends on GPIOLIB || COMPILE_TEST - depends on REGMAP_I2C + select REGMAP_I2C help Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery chargers.
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 2/314 clk: sunxi: Fix incorrect usage of round_down()
In reply to Greg Kroah-HartmanFrom: Rikard Falkeborn <[email protected]>
[ Upstream commit ee25d9742dabed3fd18158b518f846abeb70f319 ]
round_down() can only round to powers of 2. If round_down() is asked to round to something that is not a power of 2, incorrect results are produced. The incorrect results can be both too large and too small.
Instead, use rounddown() which can round to any number.
--- drivers/clk/sunxi/clk-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/sunxi/clk-sunxi.c +1 -1
@@ -90,7 +90,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req)* Round down the frequency to the closest multiple of either * 6 or 16 */ -u32 round_freq_6 =round_down (freq_mhz,6 ); +u32 round_freq_6 =rounddown (freq_mhz,6 );u32 round_freq_16 =round_down (freq_mhz,16 );if (round_freq_6 > round_freq_16)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 3/314 ASoC: tegra: tegra_wm8903: Support nvidia, headset property
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
[ Upstream commit 3ef9d5073b552d56bd6daf2af1e89b7e8d4df183 ]
The microphone-jack state needs to be masked in a case of a 4-pin jack when microphone and ground pins are shorted. Presence of nvidia,headset tells that WM8903 CODEC driver should mask microphone's status if short circuit is detected, i.e headphones are inserted.
--- sound/soc/tegra/tegra_wm8903.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
sound/soc/tegra/tegra_wm8903.c +5 -1
@@ -159,6 +159,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)struct snd_soc_component *component = codec_dai->component;struct snd_soc_card *card = rtd->card;struct tegra_wm8903 *machine =snd_soc_card_get_drvdata (card); +int shrt =0 ;if (gpio_is_valid (machine->gpio_hp_det)) { tegra_wm8903_hp_jack_gpio.gpio = machine->gpio_hp_det;
@@ -171,12 +172,15 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) &tegra_wm8903_hp_jack_gpio); } +if (of_property_read_bool (card->dev->of_node,"nvidia,headset" )) + shrt =SND_JACK_MICROPHONE ; +snd_soc_card_jack_new (rtd->card,"Mic Jack" ,SND_JACK_MICROPHONE , &tegra_wm8903_mic_jack, tegra_wm8903_mic_jack_pins,ARRAY_SIZE (tegra_wm8903_mic_jack_pins));wm8903_mic_detect (component, &tegra_wm8903_mic_jack,SND_JACK_MICROPHONE , -0 ); + shrt);snd_soc_dapm_force_enable_pin (&card->dapm,"MICBIAS" );
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 4/314 i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets
In reply to Greg Kroah-HartmanFrom: Adam Honse <[email protected]>
[ Upstream commit f27237c174fd9653033330e4e532cd9d153ce824 ]
The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller.
I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587
--- drivers/i2c/busses/i2c-piix4.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-piix4.c +2 -1
@@ -977,7 +977,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) }if (dev->vendor ==PCI_VENDOR_ID_AMD && - dev->device ==PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ) { + (dev->device ==PCI_DEVICE_ID_AMD_HUDSON2_SMBUS || + dev->device ==PCI_DEVICE_ID_AMD_KERNCZ_SMBUS )) { retval =piix4_setup_sb800 (dev, id,1 ); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 5/314 ASoC: SOF: imx8: Fix randbuild error
In reply to Greg Kroah-HartmanFrom: YueHaibing <[email protected]>
[ Upstream commit fe17e6cdc0fefca96ba9659be4b2b07487cbf0c5 ]
when do randconfig like this:CONFIG_SND_SOC_SOF_IMX8_SUPPORT=yCONFIG_SND_SOC_SOF_IMX8=yCONFIG_SND_SOC_SOF_OF=yCONFIG_IMX_DSP=mCONFIG_IMX_SCU=y
there is a link error:
sound/soc/sof/imx/imx8.o: In function 'imx8_send_msg':
imx8.c:(.text+0x380): undefined reference to 'imx_dsp_ring_doorbell'
Select IMX_DSP in SND_SOC_SOF_IMX8_SUPPORT to fix this
--- sound/soc/sof/imx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/sof/imx/Kconfig +1 -1
@@ -14,7 +14,7 @@ if SND_SOC_SOF_IMX_TOPLEVEL config SND_SOC_SOF_IMX8_SUPPORT bool "SOF support for i.MX8" depends on IMX_SCU - depends on IMX_DSP + select IMX_DSP help This adds support for Sound Open Firmware for NXP i.MX8 platforms Say Y if you have such a device.
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 6/314 iio: pressure: bmp280: Tolerate IRQ before registering
In reply to Greg Kroah-HartmanFrom: Andy Shevchenko <[email protected]>
[ Upstream commit 97b31a6f5fb95b1ec6575b78a7240baddba34384 ]
With DEBUG_SHIRQ enabled we have a kernel crash
[ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 116.606571] Call Trace: [ 116.609023] <IRQ> [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280]
because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns.
--- drivers/iio/pressure/bmp280-core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iio/pressure/bmp280-core.c +4 -1
@@ -706,7 +706,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)unsigned int ctrl;if (data->use_eoc) -init_completion (&data->done); +reinit_completion (&data->done); ret =regmap_write (data->regmap,BMP280_REG_CTRL_MEAS , ctrl_meas);if (ret)
@@ -962,6 +962,9 @@ static int bmp085_fetch_eoc_irq(struct device *dev, "trying to enforce it\n"); irq_trig =IRQF_TRIGGER_RISING ; } + +init_completion (&data->done); + ret = devm_request_threaded_irq(dev, irq, bmp085_eoc_irq,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 7/314 remoteproc: Fix IDR initialisation in rproc_alloc()
In reply to Greg Kroah-HartmanFrom: Alex Elder <[email protected]>
[ Upstream commit 6442df49400b466431979e7634849a464a5f1861 ]
If ida_simple_get() returns an error when called in rproc_alloc(), put_device() is called to clean things up. By this time the rproc device type has been assigned, with rproc_type_release() as the release function.
The first thing rproc_type_release() does is call:
idr_destroy(&rproc->notifyids);
But at the time the ida_simple_get() call is made, the notifyids field in the remoteproc structure has not been initialized.
I'm not actually sure this case causes an observable problem, but it's incorrect. Fix this by initializing the notifyids field before calling ida_simple_get() in rproc_alloc().
--- drivers/remoteproc/remoteproc_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/remoteproc/remoteproc_core.c +1 -2
@@ -2036,6 +2036,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, rproc->dev.type = &rproc_type; rproc->dev.class = &rproc_class; rproc->dev.driver_data = rproc; +idr_init (&rproc->notifyids);/* Assign a unique device index and name */ rproc->index =ida_simple_get (&rproc_dev_index,0 ,0 ,GFP_KERNEL );
@@ -2060,8 +2061,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,mutex_init (&rproc->lock); -idr_init (&rproc->notifyids); -INIT_LIST_HEAD (&rproc->carveouts);INIT_LIST_HEAD (&rproc->mappings);INIT_LIST_HEAD (&rproc->traces);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 8/314 clk: qcom: msm8916: Fix the address location of pll->config_reg
In reply to Greg Kroah-HartmanFrom: Bryan O'Donoghue <[email protected]>
[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ]
During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs.
After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL.
This error is also present in upstream msm8916.
As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example
lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf
0x01823010 GCC_BIMC_PLL_USER_CTL0x01823014 GCC_BIMC_PLL_CONFIG_CTL
This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll.
This error is likely not apparent since the bootloader will already have initialized these PLLs.
This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916.
Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")
--- drivers/clk/qcom/gcc-msm8916.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/clk/qcom/gcc-msm8916.c +4 -4
@@ -260,7 +260,7 @@ static struct clk_pll gpll0 = { .l_reg = 0x21004, .m_reg = 0x21008, .n_reg = 0x2100c, - .config_reg = 0x21014, + .config_reg = 0x21010, .mode_reg = 0x21000, .status_reg = 0x2101c, .status_bit = 17,
@@ -287,7 +287,7 @@ static struct clk_pll gpll1 = { .l_reg = 0x20004, .m_reg = 0x20008, .n_reg = 0x2000c, - .config_reg = 0x20014, + .config_reg = 0x20010, .mode_reg = 0x20000, .status_reg = 0x2001c, .status_bit = 17,
@@ -314,7 +314,7 @@ static struct clk_pll gpll2 = { .l_reg = 0x4a004, .m_reg = 0x4a008, .n_reg = 0x4a00c, - .config_reg = 0x4a014, + .config_reg = 0x4a010, .mode_reg = 0x4a000, .status_reg = 0x4a01c, .status_bit = 17,
@@ -341,7 +341,7 @@ static struct clk_pll bimc_pll = { .l_reg = 0x23004, .m_reg = 0x23008, .n_reg = 0x2300c, - .config_reg = 0x23014, + .config_reg = 0x23010, .mode_reg = 0x23000, .status_reg = 0x2301c, .status_bit = 17,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 9/314 ASoC: fsl_esai: Disable exception interrupt before scheduling tasklet
In reply to Greg Kroah-HartmanFrom: Shengjiu Wang <[email protected]>
[ Upstream commit 1fecbb71fe0e46b886f84e3b6decca6643c3af6d ]
Disable exception interrupt before scheduling tasklet, otherwise if the tasklet isn't handled immediately, there will be endless xrun interrupt.
--- sound/soc/fsl/fsl_esai.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/soc/fsl/fsl_esai.c +4 -0
@@ -87,6 +87,10 @@ static irqreturn_t esai_isr(int irq, void *devid)if ((saisr & (ESAI_SAISR_TUE |ESAI_SAISR_ROE )) && esai_priv->reset_at_xrun) {dev_dbg (&pdev->dev,"reset module for xrun\n" ); +regmap_update_bits (esai_priv->regmap,REG_ESAI_TCR , + ESAI_xCR_xEIE_MASK,0 ); +regmap_update_bits (esai_priv->regmap,REG_ESAI_RCR , + ESAI_xCR_xEIE_MASK,0 );tasklet_schedule (&esai_priv->task); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 10/314 backlight: lp855x: Ensure regulators are disabled on probe failure
In reply to Greg Kroah-HartmanFrom: Jon Hunter <[email protected]>
[ Upstream commit d8207c155a7c6015eb7f43739baa7dfb1fa638af ]
If probing the LP885x backlight fails after the regulators have been enabled, then the following warning is seen when releasing the regulators ...
WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160 Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1 Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
...
Call trace: _regulator_put.part.28+0x158/0x160 regulator_put+0x34/0x50 devm_regulator_release+0x10/0x18 release_nodes+0x12c/0x230 devres_release_all+0x34/0x50 really_probe+0x1c0/0x370 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x78 __driver_attach+0xb0/0xf0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x160/0x1f0 driver_register+0x60/0x110 i2c_register_driver+0x40/0x80 lp855x_driver_init+0x20/0x1000 [lp855x_bl] do_one_initcall+0x58/0x1a0 do_init_module+0x54/0x1d0 load_module+0x1d80/0x21c8 __do_sys_finit_module+0xe8/0x100 __arm64_sys_finit_module+0x18/0x20 el0_svc_common.constprop.3+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xf4/0x1b0 el0_sync+0x140/0x180
Fix this by ensuring that the regulators are disabled, if enabled, on probe failure.
Finally, ensure that the vddio regulator is disabled in the driver remove handler.
--- drivers/video/backlight/lp855x_bl.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
drivers/video/backlight/lp855x_bl.c +16 -4
@@ -456,7 +456,7 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret =regulator_enable (lp->enable);if (ret <0 ) {dev_err (lp->dev,"failed to enable vddio: %d\n" , ret); -return ret; + goto disable_supply; }/*
@@ -471,24 +471,34 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret =lp855x_configure (lp);if (ret) {dev_err (lp->dev,"device config err: %d" , ret); -return ret; + goto disable_vddio; } ret =lp855x_backlight_register (lp);if (ret) {dev_err (lp->dev,"failed to register backlight. err: %d\n" , ret); -return ret; + goto disable_vddio; } ret =sysfs_create_group (&lp->dev->kobj, &lp855x_attr_group);if (ret) {dev_err (lp->dev,"failed to register sysfs. err: %d\n" , ret); -return ret; + goto disable_vddio; }backlight_update_status (lp->bl); +return 0 ; + +disable_vddio: +if (lp->enable) +regulator_disable (lp->enable); +disable_supply: +if (lp->supply) +regulator_disable (lp->supply); + +return ret; }static int lp855x_remove (struct i2c_client *cl)
@@ -497,6 +507,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness =0 ;backlight_update_status (lp->bl); +if (lp->enable) +regulator_disable (lp->enable);if (lp->supply)regulator_disable (lp->supply);sysfs_remove_group (&lp->dev->kobj, &lp855x_attr_group);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 11/314 ARM: dts: renesas: Fix IOMMU device node names
In reply to Greg Kroah-HartmanFrom: Yoshihiro Shimoda <[email protected]>
[ Upstream commit ae990a1de014396ffc8d0fcc31b6888c9b0ce59a ]
Fix IOMMU device node names as "iommu@".
--- arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7744.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7791.dtsi | 14 +++++++------- arch/arm/boot/dts/r8a7793.dtsi | 14 +++++++------- arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++------ 7 files changed, 44 insertions(+), 44 deletions(-)
arch/arm/boot/dts/r8a7743.dtsi +6 -6
@@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
arch/arm/boot/dts/r8a7744.dtsi +6 -6
@@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
arch/arm/boot/dts/r8a7745.dtsi +6 -6
@@ -302,7 +302,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
arch/arm/boot/dts/r8a7790.dtsi +6 -6
@@ -427,7 +427,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>;
arch/arm/boot/dts/r8a7791.dtsi +7 -7
@@ -350,7 +350,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +360,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +369,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +379,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +388,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +398,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +407,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
arch/arm/boot/dts/r8a7793.dtsi +7 -7
@@ -336,7 +336,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
arch/arm/boot/dts/r8a7794.dtsi +6 -6
@@ -290,7 +290,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 12/314 ASoC: davinci-mcasp: Fix dma_chan refcnt leak when getting dma type
In reply to Greg Kroah-HartmanFrom: Xiyu Yang <[email protected]>
[ Upstream commit a697ae6ea56e23397341b027098c1b11d9ab13da ]
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a reference of the specified dma_chan object to "chan" with increased refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of davinci_mcasp_get_dma_type(). When chan device is NULL, the function forgets to decrease the refcnt increased by dma_request_chan(), causing a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is NULL.
--- sound/soc/ti/davinci-mcasp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
sound/soc/ti/davinci-mcasp.c +3 -1
@@ -1875,8 +1875,10 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp) PTR_ERR(chan));return PTR_ERR (chan); } -if (WARN_ON (!chan->device || !chan->device->dev)) +if (WARN_ON (!chan->device || !chan->device->dev)) { +dma_release_channel (chan);return -EINVAL ; + }if (chan->device->dev->of_node) ret = of_property_read_string(chan->device->dev->of_node,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 13/314 ARM: integrator: Add some Kconfig selections
In reply to Greg Kroah-HartmanFrom: Linus Walleij <[email protected]>
[ Upstream commit d2854bbe5f5c4b4bec8061caf4f2e603d8819446 ]
The CMA and DMA_CMA Kconfig options need to be selected by the Integrator in order to produce boot console on some Integrator systems.
The REGULATOR and REGULATOR_FIXED_VOLTAGE need to be selected in order to boot the system from an external MMC card when using MMCI/PL181 from the device tree probe path.
Select these things directly from the Kconfig so we are sure to be able to bring the systems up with console from any device tree.
--- arch/arm/mach-integrator/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
arch/arm/mach-integrator/Kconfig +4 -3
@@ -4,6 +4,8 @@ menuconfig ARCH_INTEGRATOR depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA select COMMON_CLK_VERSATILE + select CMA + select DMA_CMA select HAVE_TCM select ICST select MFD_SYSCON
@@ -35,14 +37,13 @@ config INTEGRATOR_IMPD1 select ARM_VIC select GPIO_PL061 select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. The IM-PD1 can be found on the Integrator/PP2 platform. - To compile this driver as a module, choose M here: the - module will be called impd1. - config INTEGRATOR_CM7TDMI bool "Integrator/CM7TDMI core module" depends on ARCH_INTEGRATOR_AP
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 14/314 ARM: dts: stm32: Add missing ethernet PHY reset on AV96
In reply to Greg Kroah-HartmanFrom: Marek Vasut <[email protected]>
[ Upstream commit 010ca9fe500bfe365860b50220ff80541c18f0e1 ]
Add PHY reset GPIO on AV96 ethernet PHY.
--- arch/arm/boot/dts/stm32mp157a-avenger96.dts | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/stm32mp157a-avenger96.dts +3 -0
@@ -91,6 +91,9 @@ #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + phy0: ethernet-phy@7 { reg = <7>; };
Signature · 9 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Greg Kroah-Hartman
maintainerPATCH 15/314 scsi: core: free sgtables in case command setup fails
In reply to Greg Kroah-HartmanFrom: Johannes Thumshirn <[email protected]>
[ Upstream commit 20a66f2bf280277ab5bb22e27445153b4eb0ac88 ]
In case scsi_setup_fs_cmnd() fails we're not freeing the sgtables allocated by scsi_init_io(), thus we leak the allocated memory.
Free the sgtables allocated by scsi_init_io() in case scsi_setup_fs_cmnd() fails.
Technically scsi_setup_scsi_cmnd() does not suffer from this problem as it can only fail if scsi_init_io() fails, so it does not have sgtables allocated. But to maintain symmetry and as a measure of defensive programming, free the sgtables on scsi_setup_scsi_cmnd() failure as well. scsi_mq_free_sgtables() has safeguards against double-freeing of memory so this is safe to do.
While we're at it, rename scsi_mq_free_sgtables() to scsi_free_sgtables().
--- drivers/scsi/scsi_lib.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/scsi/scsi_lib.c +11 -5
@@ -551,7 +551,7 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd) } } -static void scsi_mq_free_sgtables (struct scsi_cmnd *cmd) +static void scsi_free_sgtables (struct scsi_cmnd *cmd) {if (cmd->sdb.table.nents) sg_free_table_chained(&cmd->sdb.table,
@@ -563,7 +563,7 @@ static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)static void scsi_mq_uninit_cmd (struct scsi_cmnd *cmd) { -scsi_mq_free_sgtables (cmd); +scsi_free_sgtables (cmd);scsi_uninit_cmd (cmd);scsi_del_cmd_from_list (cmd); }
@@ -1063,7 +1063,7 @@ blk_status_t scsi_init_io(struct scsi_cmnd *cmd)return BLK_STS_OK ; out_free_sgtables: -scsi_mq_free_sgtables (cmd); +scsi_free_sgtables (cmd);return ret; }EXPORT_SYMBOL (scsi_init_io);
@@ -1214,6 +1214,7 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev, struct request *req) {struct scsi_cmnd *cmd =blk_mq_rq_to_pdu (req); +blk_status_t ret;if (!blk_rq_bytes (req)) cmd->sc_data_direction =DMA_NONE ;
@@ -1223,9 +1224,14 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev, cmd->sc_data_direction =DMA_FROM_DEVICE ;if (blk_rq_is_scsi (req)) -return scsi_setup_scsi_cmnd (sdev, req); + ret =scsi_setup_scsi_cmnd (sdev, req);else -return scsi_setup_fs_cmnd (sdev, req); + ret =scsi_setup_fs_cmnd (sdev, req); + +if (ret !=BLK_STS_OK ) +scsi_free_sgtables (cmd); + +return ret; } static blk_status_t
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 16/314 scsi: qedi: Check for buffer overflow in qedi_set_path()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit 4a4c0cfb4be74e216dd4446b254594707455bfc6 ]
Smatch complains that the "path_data->handle" variable is user controlled. It comes from iscsi_set_path() so that seems possible. It's harmless to add a limit check.
The qedi->ep_tbl[] array has qedi->max_active_conns elements (which is always ISCSI_MAX_SESS_PER_HBA (4096) elements). The array is allocated in the qedi_cm_alloc_mem() function.
--- drivers/scsi/qedi/qedi_iscsi.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/scsi/qedi/qedi_iscsi.c +4 -0
@@ -1214,6 +1214,10 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data) } iscsi_cid = (u32 )path_data->handle; +if (iscsi_cid >= qedi->max_active_conns) { + ret = -EINVAL ; + goto set_path_exit; + } qedi_ep = qedi->ep_tbl[iscsi_cid];QEDI_INFO (&qedi->dbg_ctx,QEDI_LOG_INFO ,"iscsi_cid=0x%x, qedi_ep=%p\n" , iscsi_cid, qedi_ep);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 17/314 arm64: dts: meson: fixup SCP sram nodes
In reply to Greg Kroah-HartmanFrom: Neil Armstrong <[email protected]>
[ Upstream commit 9ecded10b4b6af238da0c86197b0418912e7513e ]
The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries.
Fixup the sram entries node names, and use proper compatible for them.
It notably fixes:
sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
--- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +++--- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/amlogic/meson-axg.dtsi +3 -3
@@ -1728,18 +1728,18 @@ }; sram: sram@fffc0000 { - compatible = "amlogic,meson-axg-sram", "mmio-sram"; + compatible = "mmio-sram"; reg = <0x0 0xfffc0000 0x0 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0xfffc0000 0x20000>; - cpu_scp_lpri: scp-shmem@13000 { + cpu_scp_lpri: scp-sram@13000 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13000 0x400>; }; - cpu_scp_hpri: scp-shmem@13400 { + cpu_scp_hpri: scp-sram@13400 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13400 0x400>; };
arch/arm64/boot/dts/amlogic/meson-gx.dtsi +5 -5
@@ -345,20 +345,20 @@ }; sram: sram@c8000000 { - compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; + compatible = "mmio-sram"; reg = <0x0 0xc8000000 0x0 0x14000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0xc8000000 0x14000>; - cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; + cpu_scp_lpri: scp-sram@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; reg = <0x13000 0x400>; }; - cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; + cpu_scp_hpri: scp-sram@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; reg = <0x13400 0x400>; }; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 18/314 ALSA: hda/realtek - Introduce polarity for micmute LED GPIO
In reply to Greg Kroah-HartmanFrom: Kai-Heng Feng <[email protected]>
[ Upstream commit dbd13179780555ecd3c992dea1222ca31920e892 ]
Currently mute LED and micmute LED share the same GPIO polarity.
So split the polarity for mute and micmute, in case they have different polarities.
--- sound/pci/hda/patch_realtek.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
sound/pci/hda/patch_realtek.c +8 -6
@@ -81,6 +81,7 @@ struct alc_spec {/* mute LED for HP laptops, see alc269_fixup_mic_mute_hook() */ int mute_led_polarity; +int micmute_led_polarity;hda_nid_t mute_led_nid;hda_nid_t cap_mute_led_nid;
@@ -4080,11 +4081,9 @@ static void alc269_fixup_hp_mute_led_mic3(struct hda_codec *codec,/* update LED status via GPIO */ static void alc_update_gpio_led (struct hda_codec *codec,unsigned int mask, -bool enabled) +int polarity,bool enabled) { -struct alc_spec *spec = codec->spec; - -if (spec->mute_led_polarity) +if (polarity) enabled = !enabled;alc_update_gpio_data (codec, mask, !enabled);/* muted -> LED on */ }
@@ -4095,7 +4094,8 @@ static void alc_fixup_gpio_mute_hook(void *private_data, int enabled)struct hda_codec *codec = private_data;struct alc_spec *spec = codec->spec; -alc_update_gpio_led (codec, spec->gpio_mute_led_mask, enabled); +alc_update_gpio_led (codec, spec->gpio_mute_led_mask, + spec->mute_led_polarity, enabled); }/* turn on/off mic-mute LED via GPIO per capture hook */
@@ -4104,6 +4104,7 @@ static void alc_gpio_micmute_update(struct hda_codec *codec)struct alc_spec *spec = codec->spec;alc_update_gpio_led (codec, spec->gpio_mic_led_mask, + spec->micmute_led_polarity, spec->gen.micmute_led.led_value); }
@@ -5808,7 +5809,8 @@ static void alc280_hp_gpio4_automute_hook(struct hda_codec *codec,snd_hda_gen_hp_automute (codec, jack);/* mute_led_polarity is set to 0, so we pass inverted value here */ -alc_update_gpio_led (codec,0x10 , !spec->gen.hp_jack_present); +alc_update_gpio_led (codec,0x10 , spec->mute_led_polarity, + !spec->gen.hp_jack_present); }/* Manage GPIOs for HP EliteBook Folio 9480m.
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 19/314 ALSA: isa/wavefront: prevent out of bounds write in ioctl
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit 7f0d5053c5a9d23fe5c2d337495a9d79038d267b ]
The "header->number" comes from the ioctl and it needs to be clamped to prevent out of bounds writes.
--- sound/isa/wavefront/wavefront_synth.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
sound/isa/wavefront/wavefront_synth.c +7 -1
@@ -1171,7 +1171,10 @@ wavefront_send_alias (snd_wavefront_t *dev, wavefront_patch_info *header)"alias for %d\n" , header->number, header->hdr.a.OriginalSample); - + +if (header->number >=WF_MAX_SAMPLE ) +return -EINVAL ; +munge_int32 (header->number, &alias_hdr[0 ],2 );munge_int32 (header->hdr.a.OriginalSample, &alias_hdr[2 ],2 ); munge_int32 (*((unsigned int *)&header->hdr.a.sampleStartOffset),
@@ -1202,6 +1205,9 @@ wavefront_send_multisample (snd_wavefront_t *dev, wavefront_patch_info *header)int num_samples;unsigned char *msample_hdr; +if (header->number >=WF_MAX_SAMPLE ) +return -EINVAL ; + msample_hdr =kmalloc (WF_MSAMPLE_BYTES ,GFP_KERNEL );if (! msample_hdr)return -ENOMEM ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 20/314 PCI: Allow pci_resize_resource() for devices on root bus
In reply to Greg Kroah-HartmanFrom: Ard Biesheuvel <[email protected]>
[ Upstream commit d09ddd8190fbdc07696bf34b548ae15aa1816714 ]
When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment.
This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash.
So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place.
--- drivers/pci/setup-res.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/pci/setup-res.c +5 -4
@@ -439,10 +439,11 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size) res->end = res->start +pci_rebar_size_to_bytes (size) -1 ;/* Check if the new config works by trying to assign everything. */ - ret =pci_reassign_bridge_resources (dev->bus->self, res->flags); -if (ret) - goto error_resize; - +if (dev->bus->self) { + ret =pci_reassign_bridge_resources (dev->bus->self, res->flags); +if (ret) + goto error_resize; + }return 0 ; error_resize:
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 21/314 scsi: qla2xxx: Fix issue with adapters stopping state
In reply to Greg Kroah-HartmanFrom: Viacheslav Dubeyko <[email protected]>
[ Upstream commit 803e45550b11c8e43d89812356fe6f105adebdf9 ]
The goal of the following command sequence is to restart the adapter. However, the tgt_stop flag remains set, indicating that the adapter is still in stopping state even after re-enabling it.
echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8)
kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0
kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped>
kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped>
kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0
kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost
kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.
<skipped>
kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0
<skipped>
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.
qlt_handle_cmd_for_atio() rejects the request to send commands because the adapter is in the stopping state:
kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down
kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target
This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped == 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0, tgt_stopped == 0x1).
--- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/qla2xxx/tcm_qla2xxx.c +2 -0
@@ -926,6 +926,7 @@ static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,atomic_set (&tpg->lport_tpg_enabled,0 );qlt_stop_phase1 (vha->vha_tgt.qla_tgt); +qlt_stop_phase2 (vha->vha_tgt.qla_tgt); }return count;
@@ -1088,6 +1089,7 @@ static ssize_t tcm_qla2xxx_npiv_tpg_enable_store(struct config_item *item,atomic_set (&tpg->lport_tpg_enabled,0 );qlt_stop_phase1 (vha->vha_tgt.qla_tgt); +qlt_stop_phase2 (vha->vha_tgt.qla_tgt); }return count;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 22/314 Input: edt-ft5x06 - fix get_default register write access
In reply to Greg Kroah-HartmanFrom: Marco Felsch <[email protected]>
[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ]
Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults().
--- drivers/input/touchscreen/edt-ft5x06.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/input/touchscreen/edt-ft5x06.c +9 -3
@@ -935,19 +935,25 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev, error =device_property_read_u32 (dev,"offset" , &val);if (!error) { -edt_ft5x06_register_write (tsdata, reg_addr->reg_offset, val); +if (reg_addr->reg_offset !=NO_REGISTER ) +edt_ft5x06_register_write (tsdata, + reg_addr->reg_offset, val); tsdata->offset = val; } error =device_property_read_u32 (dev,"offset-x" , &val);if (!error) { -edt_ft5x06_register_write (tsdata, reg_addr->reg_offset_x, val); +if (reg_addr->reg_offset_x !=NO_REGISTER ) +edt_ft5x06_register_write (tsdata, + reg_addr->reg_offset_x, val); tsdata->offset_x = val; } error =device_property_read_u32 (dev,"offset-y" , &val);if (!error) { -edt_ft5x06_register_write (tsdata, reg_addr->reg_offset_y, val); +if (reg_addr->reg_offset_y !=NO_REGISTER ) +edt_ft5x06_register_write (tsdata, + reg_addr->reg_offset_y, val); tsdata->offset_y = val; } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 23/314 powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT
In reply to Greg Kroah-HartmanFrom: Christophe Leroy <[email protected]>
[ Upstream commit edbadaf0671072298e506074128b64e003c5812c ]
When CONFIG_KASAN is selected, the stack usage is increased.
In the same way as x86 and arm64 architectures, increase THREAD_SHIFT when CONFIG_KASAN is selected.
--- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/powerpc/Kconfig +1 -0
@@ -747,6 +747,7 @@ config THREAD_SHIFT range 13 15 default "15" if PPC_256K_PAGES default "14" if PPC64 + default "14" if KASAN default "13" help Used to define the stack size. The default is almost always what you
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 24/314 rtc: mc13xxx: fix a double-unlock issue
In reply to Greg Kroah-HartmanFrom: Qiushi Wu <[email protected]>
[ Upstream commit 8816cd726a4fee197af2d851cbe25991ae19ea14 ]
In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called before rtc_register_device(). But in the error path of rtc_register_device(), the mc13xxx_unlock() is called again, which causes a double-unlock problem. Thus add a call of the function “mc13xxx_lock” in an if branch for the completion of the exception handling.
--- drivers/rtc/rtc-mc13xxx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/rtc/rtc-mc13xxx.c +3 -1
@@ -308,8 +308,10 @@ static int __init mc13xxx_rtc_probe(struct platform_device *pdev)mc13xxx_unlock (mc13xxx); ret =rtc_register_device (priv->rtc); -if (ret) +if (ret) { +mc13xxx_lock (mc13xxx); goto err_irq_request; + }return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 25/314 iio: bmp280: fix compensation of humidity
In reply to Greg Kroah-HartmanFrom: Andreas Klinger <[email protected]>
[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ]
Limit the output of humidity compensation to the range between 0 and 100 percent.
Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity.
Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3.
Although this clamp is documented, it was never in the driver of the kernel.
It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures.
--- drivers/iio/pressure/bmp280-core.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/iio/pressure/bmp280-core.c +2 -0
@@ -264,6 +264,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data, + (s32)2097152) * calib->H2 + 8192) >> 14); var -= ((((var >>15 ) * (var >>15 )) >>7 ) * (s32 )calib->H1) >>4 ; + var =clamp_val (var,0 ,419430400 ); +return var >>12 ; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 26/314 f2fs: report delalloc reserve as non-free in statfs for project quota
In reply to Greg Kroah-HartmanFrom: Konstantin Khlebnikov <[email protected]>
[ Upstream commit baaa7ebf25c78c5cb712fac16b7f549100beddd3 ]
This reserved space isn't committed yet but cannot be used for allocations. For userspace it has no difference from used space.
See the same fix in ext4 commit f06925c73942 ("ext4: report delalloc reserve as non-free in statfs for project quota").
--- fs/f2fs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/f2fs/super.c +2 -1
@@ -1230,7 +1230,8 @@ static int f2fs_statfs_project(struct super_block *sb, limit >>= sb->s_blocksize_bits;if (limit && buf->f_blocks > limit) { - curblock = dquot->dq_dqb.dqb_curspace >> sb->s_blocksize_bits; + curblock = (dquot->dq_dqb.dqb_curspace + + dquot->dq_dqb.dqb_rsvspace) >> sb->s_blocksize_bits; buf->f_blocks = limit; buf->f_bfree = buf->f_bavail = (buf->f_blocks > curblock) ?
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 27/314 i2c: pxa: clear all master action bits in i2c_pxa_stop_message()
In reply to Greg Kroah-HartmanFrom: Russell King <[email protected]>
[ Upstream commit e81c979f4e071d516aa27cf5a0c3939da00dc1ca ]
If we timeout during a message transfer, the control register may contain bits that cause an action to be set. Read-modify-writing the register leaving these bits set may trigger the hardware to attempt one of these actions unintentionally.
Always clear these bits when cleaning up after a message or after a timeout.
--- drivers/i2c/busses/i2c-pxa.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-pxa.c +2 -4
@@ -706,11 +706,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) {u32 icr; -/* -* Clear the STOP and ACK flags -*/ +/* Clear the START, STOP, ACK, TB and MA flags */ icr =readl (_ICR (i2c)); - icr &= ~(ICR_STOP |ICR_ACKNAK ); + icr &= ~(ICR_START |ICR_STOP |ICR_ACKNAK |ICR_TB |ICR_MA );writel (icr,_ICR (i2c)); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 28/314 remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
In reply to Greg Kroah-HartmanFrom: Sibi Sankar <[email protected]>
[ Upstream commit be050a3429f46ecf13eb2b80f299479f8bb823fb ]
The application processor accessing the mpss region when the Q6 modem is running will lead to an XPU violation. Fix this by un-mapping the mpss segments post copy during mpss authentication and coredumps.
--- drivers/remoteproc/qcom_q6v5_mss.c | 31 +++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
drivers/remoteproc/qcom_q6v5_mss.c +20 -11
@@ -1005,7 +1005,13 @@ static int q6v5_mpss_load(struct q6v5 *qproc) goto release_firmware; } - ptr = qproc->mpss_region + offset; + ptr =ioremap_wc (qproc->mpss_phys + offset, phdr->p_memsz); +if (!ptr) { +dev_err (qproc->dev, +"unable to map memory region: %pa+%zx-%x\n" , + &qproc->mpss_phys, offset, phdr->p_memsz); + goto release_firmware; + }if (phdr->p_filesz && phdr->p_offset < fw->size) {/* Firmware is large enough to be non-split */
@@ -1014,6 +1020,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)"failed to load segment %d from truncated file %s\n" , i, fw_name); ret = -EINVAL ; +iounmap (ptr); goto release_firmware; }
@@ -1024,6 +1031,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc) ret =request_firmware (&seg_fw, fw_name, qproc->dev);if (ret) {dev_err (qproc->dev,"failed to load %s\n" , fw_name); +iounmap (ptr); goto release_firmware; }
@@ -1036,6 +1044,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)memset (ptr + phdr->p_filesz,0 , phdr->p_memsz - phdr->p_filesz); } +iounmap (ptr); size += phdr->p_memsz; }
@@ -1075,7 +1084,8 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,int ret =0 ;struct q6v5 *qproc = rproc->priv;unsigned long mask =BIT ((unsigned long )segment->priv); -void *ptr =rproc_da_to_va (rproc, segment->da, segment->size); +int offset = segment->da - qproc->mpss_reloc; +void *ptr =NULL ;/* Unlock mba before copying segments */ if (!qproc->dump_mba_loaded) {
@@ -1089,10 +1099,15 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc, } } -if (!ptr || ret) -memset (dest,0xff , segment->size); -else +if (!ret) + ptr =ioremap_wc (qproc->mpss_phys + offset, segment->size); + +if (ptr) {memcpy (dest, ptr, segment->size); +iounmap (ptr); + }else { +memset (dest,0xff , segment->size); + } qproc->dump_segment_mask |= mask;
@@ -1393,12 +1408,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc) qproc->mpss_phys = qproc->mpss_reloc = r.start; qproc->mpss_size =resource_size (&r); - qproc->mpss_region =devm_ioremap_wc (qproc->dev, qproc->mpss_phys, qproc->mpss_size); -if (!qproc->mpss_region) { -dev_err (qproc->dev,"unable to map memory region: %pa+%zx\n" , - &r.start, qproc->mpss_size); -return -EBUSY ; - }return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 29/314 clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
In reply to Greg Kroah-HartmanFrom: Marek Szyprowski <[email protected]>
[ Upstream commit e47bd937e602bb4379546095d1bd0b9871fa60c2 ]
The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must be kept enabled all the time to allow proper access to power management control for the ISP and CAM power domains. The last two clocks, although related to GScaler device and GSCL power domain, provides also the I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power domain and are needed for proper power on/off sequence.
Currently there are no drivers for the devices, which are part of CAM and ISP power domains yet. This patch only fixes the race between disabling the unused power domains and disabling unused clocks, which randomly resulted in the following error during boot:
Power domain CAM disable failed
Power domain ISP disable failed
--- drivers/clk/samsung/clk-exynos5420.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/clk/samsung/clk-exynos5420.c +9 -7
@@ -540,7 +540,7 @@ static const struct samsung_div_clock exynos5800_div_clks[] __initconst = {static const struct samsung_gate_clock exynos5800_gate_clks[]__initconst = {GATE (CLK_ACLK550_CAM ,"aclk550_cam" ,"mout_user_aclk550_cam" , -GATE_BUS_TOP ,24 ,0 ,0 ), +GATE_BUS_TOP ,24 ,CLK_IS_CRITICAL ,0 ),GATE (CLK_ACLK432_SCALER ,"aclk432_scaler" ,"mout_user_aclk432_scaler" ,GATE_BUS_TOP ,27 ,CLK_IS_CRITICAL ,0 ), };
@@ -940,25 +940,25 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {GATE (0 ,"aclk300_jpeg" ,"mout_user_aclk300_jpeg" ,GATE_BUS_TOP ,4 ,CLK_IGNORE_UNUSED ,0 ),GATE (0 ,"aclk333_432_isp0" ,"mout_user_aclk333_432_isp0" , -GATE_BUS_TOP ,5 ,0 ,0 ), +GATE_BUS_TOP ,5 ,CLK_IS_CRITICAL ,0 ),GATE (0 ,"aclk300_gscl" ,"mout_user_aclk300_gscl" ,GATE_BUS_TOP ,6 ,CLK_IS_CRITICAL ,0 ),GATE (0 ,"aclk333_432_gscl" ,"mout_user_aclk333_432_gscl" ,GATE_BUS_TOP ,7 ,CLK_IGNORE_UNUSED ,0 ),GATE (0 ,"aclk333_432_isp" ,"mout_user_aclk333_432_isp" , -GATE_BUS_TOP ,8 ,0 ,0 ), +GATE_BUS_TOP ,8 ,CLK_IS_CRITICAL ,0 ),GATE (CLK_PCLK66_GPIO ,"pclk66_gpio" ,"mout_user_pclk66_gpio" ,GATE_BUS_TOP ,9 ,CLK_IGNORE_UNUSED ,0 ),GATE (0 ,"aclk66_psgen" ,"mout_user_aclk66_psgen" ,GATE_BUS_TOP ,10 ,CLK_IGNORE_UNUSED ,0 ),GATE (0 ,"aclk266_isp" ,"mout_user_aclk266_isp" , -GATE_BUS_TOP ,13 ,0 ,0 ), +GATE_BUS_TOP ,13 ,CLK_IS_CRITICAL ,0 ),GATE (0 ,"aclk166" ,"mout_user_aclk166" ,GATE_BUS_TOP ,14 ,CLK_IGNORE_UNUSED ,0 ),GATE (CLK_ACLK333 ,"aclk333" ,"mout_user_aclk333" ,GATE_BUS_TOP ,15 ,CLK_IS_CRITICAL ,0 ),GATE (0 ,"aclk400_isp" ,"mout_user_aclk400_isp" , -GATE_BUS_TOP ,16 ,0 ,0 ), +GATE_BUS_TOP ,16 ,CLK_IS_CRITICAL ,0 ),GATE (0 ,"aclk400_mscl" ,"mout_user_aclk400_mscl" ,GATE_BUS_TOP ,17 ,CLK_IS_CRITICAL ,0 ), GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
@@ -1158,8 +1158,10 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE_IP_GSCL1, 3, 0, 0),GATE (CLK_SMMU_FIMCL1 ,"smmu_fimcl1" ,"dout_gscl_blk_333" ,GATE_IP_GSCL1 ,4 ,0 ,0 ), -GATE (CLK_GSCL_WA ,"gscl_wa" ,"sclk_gscl_wa" ,GATE_IP_GSCL1 ,12 ,0 ,0 ), -GATE (CLK_GSCL_WB ,"gscl_wb" ,"sclk_gscl_wb" ,GATE_IP_GSCL1 ,13 ,0 ,0 ), +GATE (CLK_GSCL_WA ,"gscl_wa" ,"sclk_gscl_wa" ,GATE_IP_GSCL1 ,12 , +CLK_IS_CRITICAL ,0 ), +GATE (CLK_GSCL_WB ,"gscl_wb" ,"sclk_gscl_wb" ,GATE_IP_GSCL1 ,13 , +CLK_IS_CRITICAL ,0 ),GATE (CLK_SMMU_FIMCL3 ,"smmu_fimcl3," ,"dout_gscl_blk_333" ,GATE_IP_GSCL1 ,16 ,0 ,0 ), GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 30/314 usblp: poison URBs upon disconnect
In reply to Greg Kroah-HartmanFrom: Oliver Neukum <[email protected]>
[ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ]
syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real.
--- drivers/usb/class/usblp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/usb/class/usblp.c +4 -1
@@ -468,7 +468,8 @@ static int usblp_release(struct inode *inode, struct file *file)usb_autopm_put_interface (usblp->intf);if (!usblp->present)/* finish cleanup from disconnect */ -usblp_cleanup (usblp); +usblp_cleanup (usblp);/* any URBs must be dead */ +mutex_unlock (&usblp_mutex);return 0 ; }
@@ -1375,9 +1376,11 @@ static void usblp_disconnect(struct usb_interface *intf)usblp_unlink_urbs (usblp);mutex_unlock (&usblp->mut); +usb_poison_anchored_urbs (&usblp->urbs);if (!usblp->used)usblp_cleanup (usblp); +mutex_unlock (&usblp_mutex); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 31/314 serial: 8250: Fix max baud limit in generic 8250 port
In reply to Greg Kroah-HartmanFrom: Serge Semin <[email protected]>
[ Upstream commit 7b668c064ec33f3d687c3a413d05e355172e6c92 ]
Standard 8250 UART ports are designed in a way so they can communicate with baud rates up to 1/16 of a reference frequency. It's expected from most of the currently supported UART controllers. That's why the former version of serial8250_get_baud_rate() method called uart_get_baud_rate() with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX) and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like it was suggested in commit ("serial: 8250_mtk: support big baud rate."), caused acceptance of bauds, which was higher than the normal UART controllers actually supported. As a result if some user-space program requested to set a baud greater than (uartclk / 16) it would have been permitted without truncation, but then serial8250_get_divisor(baud) (which calls uart_get_divisor() to get the reference clock divisor) would have returned a zero divisor. Setting zero divisor will cause an unpredictable effect varying from chip to chip. In case of DW APB UART the communications just stop.
Lets fix this problem by getting back the limitation of (uartclk + tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek 8250 UART ports driver developer shouldn't have touched it in the first place notably seeing he already provided a custom version of set_termios() callback in that glue-driver which took into account the extended baud rate values and accordingly updated the standard and vendor-specific divisor latch registers anyway.
--- drivers/tty/serial/8250/8250_port.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_port.c +3 -1
@@ -2539,6 +2539,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,struct ktermios *termios, struct ktermios *old) { + unsigned int tolerance = port->uartclk / 100; +/* * Ask the core to calculate the divisor for us. * Allow 1% tolerance at the upper limit so uart clks marginally
@@ -2547,7 +2549,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,*/ return uart_get_baud_rate (port, termios, old, port->uartclk /16 /UART_DIV_MAX , - port->uartclk); + (port->uartclk + tolerance) /16 ); }void
Signature · 9 lines
2.25.1 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Greg Kroah-Hartman
maintainerPATCH 32/314 misc: fastrpc: Fix an incomplete memory release in fastrpc_rpmsg_probe()
In reply to Greg Kroah-HartmanFrom: Srinivas Kandagatla <[email protected]>
[ Upstream commit 0978de9fc7335c73934ab8fac189fb4cb3f23191 ]
fastrpc_channel_ctx is not freed if misc_register() fails, this would lead to a memory leak. Fix this leak by adding kfree in misc_register() error path.
--- drivers/misc/fastrpc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/misc/fastrpc.c +3 -1
@@ -1434,8 +1434,10 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev) domains[domain_id]); data->miscdev.fops = &fastrpc_fops; err =misc_register (&data->miscdev); -if (err) +if (err) { +kfree (data);return err; + }kref_init (&data->refcount);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 33/314 misc: fastrpc: fix potential fastrpc_invoke_ctx leak
In reply to Greg Kroah-HartmanFrom: Srinivas Kandagatla <[email protected]>
[ Upstream commit 74003385cf716f1b88cc7753ca282f5493f204a2 ]
fastrpc_invoke_ctx can have refcount of 2 in error path where rpmsg_send() fails to send invoke message. decrement the refcount properly in the error path to fix this leak.
This also fixes below static checker warning:
drivers/misc/fastrpc.c:990 fastrpc_internal_invoke()
warn: 'ctx->refcount.refcount.ref.counter' not decremented on lines: 990.
--- drivers/misc/fastrpc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/misc/fastrpc.c +8 -1
@@ -886,6 +886,7 @@ static int fastrpc_invoke_send(struct fastrpc_session_ctx *sctx,struct fastrpc_channel_ctx *cctx;struct fastrpc_user *fl = ctx->fl;struct fastrpc_msg *msg = &ctx->msg; +int ret; cctx = fl->cctx; msg->pid = fl->tgid;
@@ -901,7 +902,13 @@ static int fastrpc_invoke_send(struct fastrpc_session_ctx *sctx, msg->size =roundup (ctx->msg_sz,PAGE_SIZE );fastrpc_context_get (ctx); -return rpmsg_send (cctx->rpdev->ept, (void *)msg,sizeof (*msg)); + ret =rpmsg_send (cctx->rpdev->ept, (void *)msg,sizeof (*msg)); + +if (ret) +fastrpc_context_put (ctx); + +return ret; + } static int fastrpc_internal_invoke(struct fastrpc_user *fl, u32 kernel,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 34/314 dm mpath: switch paths in dm_blk_ioctl() code path
In reply to Greg Kroah-HartmanFrom: Martin Wilck <[email protected]>
[ Upstream commit 2361ae595352dec015d14292f1b539242d8446d6 ]
SCSI LUN passthrough code such as qemu's "scsi-block" device model pass every IO to the host via SG_IO ioctls. Currently, dm-multipath calls choose_pgpath() only in the block IO code path, not in the ioctl code path (unless current_pgpath is NULL). This has the effect that no path switching and thus no load balancing is done for SCSI-passthrough IO, unless the active path fails.
Fix this by using the same logic in multipath_prepare_ioctl() as in multipath_clone_and_map().
Note: The allegedly best path selection algorithm, service-time, still wouldn't work perfectly, because the io size of the current request is always set to 0. Changing that for the IO passthrough case would require the ioctl cmd and arg to be passed to dm's prepare_ioctl() method.
--- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/dm-mpath.c +1 -1
@@ -1856,7 +1856,7 @@ static int multipath_prepare_ioctl(struct dm_target *ti,int r; current_pgpath =READ_ONCE (m->current_pgpath); -if (!current_pgpath) +if (!current_pgpath || !test_bit (MPATHF_QUEUE_IO , &m->flags)) current_pgpath =choose_pgpath (m,0 );if (current_pgpath) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 35/314 arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes
In reply to Greg Kroah-HartmanFrom: Marek Behún <[email protected]>
[ Upstream commit 7a2c36b039d2343cc29fec6102da839477b8dc60 ]
Use sdhci-caps-mask to forbid SDR104 mode on the SDIO capable SDHCI controller. Without this the device cannot pass electromagnetic interference certifications.
--- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +2 -0
@@ -171,6 +171,8 @@ marvell,pad-type = "sd"; vqmmc-supply = <&vsdio_reg>; mmc-pwrseq = <&sdhci1_pwrseq>; + /* forbid SDR104 for FCC purposes */ + sdhci-caps-mask = <0x2 0x0>; status = "okay"; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 36/314 arm64: dts: armada-3720-turris-mox: fix SFP binding
In reply to Greg Kroah-HartmanFrom: Marek Behún <[email protected]>
[ Upstream commit c2671acbbbd822ef077cc168991e0a7dbe2172c9 ]
The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched kernel where the latter was working.
--- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +1 -1
@@ -95,7 +95,7 @@ }; sfp: sfp { - compatible = "sff,sfp+"; + compatible = "sff,sfp"; i2c-bus = <&i2c0>; los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 37/314 arm64: dts: juno: Fix GIC child nodes
In reply to Greg Kroah-HartmanFrom: Andre Przywara <[email protected]>
[ Upstream commit a78aee9e434932a500db36cc6d88daeff3745e9f ]
The GIC DT nodes for the Juno boards were not fully compliant with the DT binding, which has certain expectations about child nodes and their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one field of the interrupt-map property depends on the GIC's address-size.
--- arch/arm64/boot/dts/arm/juno-base.dtsi | 50 +++++++++++++------------- 1 file changed, 25 insertions(+), 25 deletions(-)
arch/arm64/boot/dts/arm/juno-base.dtsi +25 -25
@@ -62,35 +62,35 @@ <0x0 0x2c02f000 0 0x2000>, <0x0 0x2c04f000 0 0x2000>, <0x0 0x2c06f000 0 0x2000>; - #address-cells = <2>; + #address-cells = <1>; #interrupt-cells = <3>; - #size-cells = <2>; + #size-cells = <1>; interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - ranges = <0 0 0 0x2c1c0000 0 0x40000>; + ranges = <0 0 0x2c1c0000 0x40000>; v2m_0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0 0 0x10000>; + reg = <0 0x10000>; }; v2m@10000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x10000 0 0x10000>; + reg = <0x10000 0x10000>; }; v2m@20000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x20000 0 0x10000>; + reg = <0x20000 0x10000>; }; v2m@30000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x30000 0 0x10000>; + reg = <0x30000 0x10000>; }; };
@@ -519,10 +519,10 @@ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; msi-parent = <&v2m_0>; status = "disabled"; iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */
@@ -786,19 +786,19 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; }; site2: tlx@60000000 {
@@ -808,6 +808,6 @@ ranges = <0 0 0x60000000 0x10000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0>; - interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; }; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 38/314 pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
In reply to Greg Kroah-HartmanFrom: Lars Povlsen <[email protected]>
[ Upstream commit 0b47afc65453a70bc521e251138418056f65793f ]
This fixes a problem with using the GPIO as an interrupt on Jaguar2 (and similar), as the register layout of the platforms with 64 GPIO's are pairwise, such that the original offset must be multiplied with the platform stride.
--- drivers/pinctrl/pinctrl-ocelot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pinctrl/pinctrl-ocelot.c +2 -1
@@ -711,11 +711,12 @@ static void ocelot_irq_handler(struct irq_desc *desc)struct irq_chip *parent_chip =irq_desc_get_chip (desc);struct gpio_chip *chip =irq_desc_get_handler_data (desc);struct ocelot_pinctrl *info =gpiochip_get_data (chip); +unsigned int id_reg =OCELOT_GPIO_INTR_IDENT * info->stride;unsigned int reg =0 , irq, i;unsigned long irqs;for (i =0 ; i < info->stride; i++) { -regmap_read (info->map,OCELOT_GPIO_INTR_IDENT +4 * i, ®); +regmap_read (info->map, id_reg +4 * i, ®);if (!reg)continue ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 39/314 clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
In reply to Greg Kroah-HartmanFrom: Geert Uytterhoeven <[email protected]>
[ Upstream commit ace342097768e35fd41934285604fa97da1e235a ]
On SoCs with Standby Control Registers (STBCRs) instead of Module Stop Control Registers (MSTPCRs), the suspend handler saves the wrong registers, and the resume handler prints the wrong register in an error message.
Fortunately this cannot happen yet, as the suspend/resume code is used on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not use PSCI. Still, it is better to fix this, to avoid this becoming a problem in the future.
Distinguish between STBCRs and MSTPCRs where needed. Replace the useless printing of the virtual register address in the resume error message by printing the register index.
--- drivers/clk/renesas/renesas-cpg-mssr.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/clk/renesas/renesas-cpg-mssr.c +5 -3
@@ -800,7 +800,8 @@ static int cpg_mssr_suspend_noirq(struct device *dev)/* Save module registers with bits under our control */ for (reg =0 ; reg <ARRAY_SIZE (priv->smstpcr_saved); reg++) {if (priv->smstpcr_saved[reg].mask) - priv->smstpcr_saved[reg].val = + priv->smstpcr_saved[reg].val = priv->stbyctrl ? +readb (priv->base +STBCR (reg)) :readl (priv->base +SMSTPCR (reg)); }
@@ -860,8 +861,9 @@ static int cpg_mssr_resume_noirq(struct device *dev) }if (!i) -dev_warn (dev,"Failed to enable SMSTP %p[0x%x]\n" , - priv->base +SMSTPCR (reg), oldval & mask); +dev_warn (dev,"Failed to enable %s%u[0x%x]\n" , + priv->stbyctrl ?"STB" :"SMSTP" , reg, + oldval & mask); }return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 40/314 ASoC: SOF: Do nothing when DSP PM callbacks are not set
In reply to Greg Kroah-HartmanFrom: Daniel Baluta <[email protected]>
[ Upstream commit c26fde3b15ed41f5f452f1da727795f787833287 ]
This provides a better separation between runtime and PM sleep callbacks.
Only do nothing if given runtime flag is set and calback is not set.
With the current implementation, if PM sleep callback is set but runtime callback is not set then at runtime resume we reload the firmware even if we do not support runtime resume callback.
--- sound/soc/sof/pm.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
sound/soc/sof/pm.c +8 -2
@@ -266,7 +266,10 @@ static int sof_resume(struct device *dev, bool runtime_resume)int ret;/* do nothing if dsp resume callbacks are not set */ -if (!sof_ops (sdev)->resume || !sof_ops (sdev)->runtime_resume) +if (!runtime_resume && !sof_ops (sdev)->resume) +return 0 ; + +if (runtime_resume && !sof_ops (sdev)->runtime_resume)return 0 ;/* DSP was never successfully started, nothing to resume */
@@ -346,7 +349,10 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)int ret;/* do nothing if dsp suspend callback is not set */ -if (!sof_ops (sdev)->suspend) +if (!runtime_suspend && !sof_ops (sdev)->suspend) +return 0 ; + +if (runtime_suspend && !sof_ops (sdev)->runtime_suspend)return 0 ;if (sdev->fw_state !=SOF_FW_BOOT_COMPLETE )
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 41/314 arm64: dts: fvp: Fix GIC child nodes
In reply to Greg Kroah-HartmanFrom: Andre Przywara <[email protected]>
[ Upstream commit 78631aecc52c4b2adcf611769df2ff9c67ac16d0 ]
The GIC DT nodes for the fastmodels were not fully compliant with the DT binding, which has certain expectations about child nodes and their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one field of the interrupt-map property depends on the GIC's address-size.
Since the .dts files share interrupt nexus nodes across different interrupt controllers (GICv2 vs. GICv3), we need to use the only commonly allowed #address-size value of <1> for both.
--- .../boot/dts/arm/foundation-v8-gicv2.dtsi | 2 +- .../boot/dts/arm/foundation-v8-gicv3.dtsi | 8 +- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 86 +++++++++---------- 3 files changed, 48 insertions(+), 48 deletions(-)
arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi +1 -1
@@ -8,7 +8,7 @@ gic: interrupt-controller@2c001000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <2>; + #address-cells = <1>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, <0x0 0x2c002000 0 0x2000>,
arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi +4 -4
@@ -8,9 +8,9 @@ gic: interrupt-controller@2f000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x2f000000 0x100000>; interrupt-controller; reg = <0x0 0x2f000000 0x0 0x10000>, <0x0 0x2f100000 0x0 0x200000>,
@@ -22,7 +22,7 @@ its: its@2f020000 { compatible = "arm,gic-v3-its"; msi-controller; - reg = <0x0 0x2f020000 0x0 0x20000>; + reg = <0x20000 0x20000>; }; }; };
arch/arm64/boot/dts/arm/foundation-v8.dtsi +43 -43
92 lines not on this page · raw message
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 42/314 PCI: aardvark: Dont blindly enable ASPM L0s and dont write to read-only register
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit 90c6cb4a355e7befcb557d217d1d8b8bd5875a05 ]
Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense.
In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register.
Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory.
Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect.
Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly.
Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.:
https://bugzilla.kernel.org/show_bug.cgi?id=196339
If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards.
--- drivers/pci/controller/pci-aardvark.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/pci/controller/pci-aardvark.c +0 -4
@@ -344,10 +344,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)advk_pcie_wait_for_link (pcie); - reg =PCIE_CORE_LINK_L0S_ENTRY | - (1 <<PCIE_CORE_LINK_WIDTH_SHIFT ); -advk_writel (pcie, reg,PCIE_CORE_LINK_CTRL_STAT_REG ); - reg =advk_readl (pcie,PCIE_CORE_CMD_STATUS_REG ); reg |=PCIE_CORE_CMD_MEM_ACCESS_EN | PCIE_CORE_CMD_IO_ACCESS_EN |
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 43/314 ps3disk: use the default segment boundary
In reply to Greg Kroah-HartmanFrom: Emmanuel Nicolet <[email protected]>
[ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ]
Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0:
kernel BUG at block/bio.c:1853!
Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 <SF,EE,IR,DR,RI> CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]---
The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement.
Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem.
--- drivers/block/ps3disk.c | 1 - 1 file changed, 1 deletion(-)
drivers/block/ps3disk.c +0 -1
@@ -454,7 +454,6 @@ static int ps3disk_probe(struct ps3_system_bus_device *_dev) queue->queuedata = dev;blk_queue_max_hw_sectors (queue, dev->bounce_size >>9 ); -blk_queue_segment_boundary (queue,-1UL );blk_queue_dma_alignment (queue, dev->blk_size-1 );blk_queue_logical_block_size (queue, dev->blk_size);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 44/314 arm64: dts: fvp/juno: Fix node address fields
In reply to Greg Kroah-HartmanFrom: Andre Przywara <[email protected]>
[ Upstream commit bb5cce12ac717c7462217cd493ed701d12d6dbce ]
The Arm Ltd. boards were using an outdated address convention in the DT node names, by separating the high from the low 32-bits of an address by a comma.
Remove the comma from the node name suffix to be DT spec compliant.
--- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 10 +++++----- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 4 ++-- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 6 +++--- arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 6 +++--- 5 files changed, 14 insertions(+), 14 deletions(-)
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +5 -5
@@ -31,7 +31,7 @@ #interrupt-cells = <1>; ranges; - nor_flash: flash@0,00000000 { + nor_flash: flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>;
@@ -41,13 +41,13 @@ }; }; - psram@1,00000000 { + psram@100000000 { compatible = "arm,vexpress-psram", "mtd-ram"; reg = <1 0x00000000 0x02000000>; bank-width = <4>; }; - ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; interrupts = <15>;
@@ -59,14 +59,14 @@ vddvario-supply = <&v2m_fixed_3v3>; }; - usb@2,03000000 { + usb@203000000 { compatible = "nxp,usb-isp1761"; reg = <2 0x03000000 0x20000>; interrupts = <16>; port1-otg; }; - iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/arm/foundation-v8.dtsi +2 -2
@@ -151,7 +151,7 @@ <0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan91c111"; reg = <2 0x02000000 0x10000>; interrupts = <15>;
@@ -178,7 +178,7 @@ clock-output-names = "v2m:refclk32khz"; }; - iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/arm/juno-motherboard.dtsi +3 -3
@@ -103,7 +103,7 @@ }; }; - flash@0,00000000 { + flash@0 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>;
@@ -120,7 +120,7 @@ }; }; - ethernet@2,00000000 { + ethernet@200000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; interrupts = <3>;
@@ -133,7 +133,7 @@ vddvario-supply = <&mb_fixed_3v3>; }; - iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi +1 -1
@@ -9,7 +9,7 @@ motherboard { arm,v2m-memory-map = "rs2"; - iofpga@3,00000000 { + iofpga@300000000 { virtio-p9@140000 { compatible = "virtio,mmio"; reg = <0x140000 0x200>;
arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +3 -3
@@ -17,14 +17,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; }; - ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan91c111"; reg = <2 0x02000000 0x10000>; interrupts = <15>;
@@ -51,7 +51,7 @@ clock-output-names = "v2m:refclk32khz"; }; - iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 45/314 vfio/pci: fix memory leaks in alloc_perm_bits()
In reply to Greg Kroah-HartmanFrom: Qian Cai <[email protected]>
[ Upstream commit 3e63b94b6274324ff2e7d8615df31586de827c4e ]
vfio_pci_disable() calls vfio_config_free() but forgets to call free_perm_bits() resulting in memory leaks,
unreferenced object 0xc000000c4db2dee0 (size 16):
comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes):
00 00 ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................
backtrace:
[<00000000a6a4552d>] alloc_perm_bits+0x58/0xe0 [vfio_pci]
[<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci]
init_pci_cap_msi_perm at drivers/vfio/pci/vfio_pci_config.c:1125
(inlined by) vfio_msi_cap_len at drivers/vfio/pci/vfio_pci_config.c:1180
(inlined by) vfio_cap_len at drivers/vfio/pci/vfio_pci_config.c:1241
(inlined by) vfio_cap_init at drivers/vfio/pci/vfio_pci_config.c:1468
(inlined by) vfio_config_init at drivers/vfio/pci/vfio_pci_config.c:1707
[<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci]
[<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio]
[<000000009e34c54f>] ksys_ioctl+0xd8/0x130
[<000000006577923d>] sys_ioctl+0x28/0x40
[<000000006d7b1cf2>] system_call_exception+0x114/0x1e0
[<0000000008ea7dd5>] system_call_common+0xf0/0x278
unreferenced object 0xc000000c4db2e330 (size 16):
comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s)
hex dump (first 16 bytes):
00 ff ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................
backtrace:
[<000000004c71914f>] alloc_perm_bits+0x44/0xe0 [vfio_pci]
[<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci]
[<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci]
[<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio]
[<000000009e34c54f>] ksys_ioctl+0xd8/0x130
[<000000006577923d>] sys_ioctl+0x28/0x40
[<000000006d7b1cf2>] system_call_exception+0x114/0x1e0
[<0000000008ea7dd5>] system_call_common+0xf0/0x278--- drivers/vfio/pci/vfio_pci_config.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/vfio/pci/vfio_pci_config.c +5 -2
@@ -1726,8 +1726,11 @@ void vfio_config_free(struct vfio_pci_device *vdev) vdev->vconfig =NULL ;kfree (vdev->pci_config_map); vdev->pci_config_map =NULL ; -kfree (vdev->msi_perm); - vdev->msi_perm =NULL ; +if (vdev->msi_perm) { +free_perm_bits (vdev->msi_perm); +kfree (vdev->msi_perm); + vdev->msi_perm =NULL ; + } }/*
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 46/314 coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()
In reply to Greg Kroah-HartmanFrom: Sai Prakash Ranjan <[email protected]>
[ Upstream commit 347adb0d6385c3220dc01ab61807a5b1892901cc ]
On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register.
Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122 Call trace: dump_backtrace+0x0/0x188 show_stack+0x20/0x2c dump_stack+0xdc/0x144 panic+0x168/0x36c panic+0x0/0x36c arm64_serror_panic+0x78/0x84 do_serror+0x130/0x138 el1_error+0x84/0xf8 tmc_read_prepare_etb+0x88/0xb8 tmc_open+0x40/0xd8 misc_open+0x120/0x158 chrdev_open+0xb8/0x1a4 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3e8 __arm64_compat_sys_openat+0x28/0x34 el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10
--- drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +8 -8
@@ -596,13 +596,6 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) goto out; } -/* There is no point in reading a TMC in HW FIFO mode */ - mode =readl_relaxed (drvdata->base +TMC_MODE ); -if (mode !=TMC_MODE_CIRCULAR_BUFFER ) { - ret = -EINVAL ; - goto out; - } -/* Don't interfere if operated from Perf */ if (drvdata->mode ==CS_MODE_PERF ) { ret = -EINVAL ;
@@ -616,8 +609,15 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) }/* Disable the TMC if need be */ -if (drvdata->mode ==CS_MODE_SYSFS ) +if (drvdata->mode ==CS_MODE_SYSFS ) { +/* There is no point in reading a TMC in HW FIFO mode */ + mode =readl_relaxed (drvdata->base +TMC_MODE ); +if (mode !=TMC_MODE_CIRCULAR_BUFFER ) { + ret = -EINVAL ; + goto out; + }__tmc_etb_disable_hw (drvdata); + } drvdata->reading = true; out:
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 47/314 RDMA/mlx5: Add init2init as a modify command
In reply to Greg Kroah-HartmanFrom: Aharon Landau <[email protected]>
[ Upstream commit 819f7427bafd494ef7ca4942ec6322db20722d7b ]
Missing INIT2INIT entry in the list of modify commands caused DEVX applications to be unable to modify_qp for this transition state. Add the MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
--- drivers/infiniband/hw/mlx5/devx.c | 1 + 1 file changed, 1 insertion(+)
drivers/infiniband/hw/mlx5/devx.c +1 -0
@@ -814,6 +814,7 @@ static bool devx_is_obj_modify_cmd(const void *in)case MLX5_CMD_OP_SET_L2_TABLE_ENTRY :case MLX5_CMD_OP_RST2INIT_QP :case MLX5_CMD_OP_INIT2RTR_QP : +case MLX5_CMD_OP_INIT2INIT_QP :case MLX5_CMD_OP_RTR2RTS_QP :case MLX5_CMD_OP_RTS2RTS_QP :case MLX5_CMD_OP_SQERR2RTS_QP :
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 48/314 scsi: hisi_sas: Do not reset phy timer to wait for stray phy up
In reply to Greg Kroah-HartmanFrom: Luo Jiaxing <[email protected]>
[ Upstream commit e16b9ed61e078d836a0f24a82080cf29d7539c7e ]
We found out that after phy up, the hardware reports another oob interrupt but did not follow a phy up interrupt:
oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout
We run link reset when wait phy up timeout, and it send a normal disk into reset processing. So we made some circumvention action in the code, so that this abnormal oob interrupt will not start the timer to wait for phy up.
--- drivers/scsi/hisi_sas/hisi_sas_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_main.c +4 -1
@@ -904,8 +904,11 @@ void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no)struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];struct device *dev = hisi_hba->dev; +dev_dbg (dev,"phy%d OOB ready\n" , phy_no); +if (phy->phy_attached) +return ; +if (!timer_pending (&phy->timer)) { -dev_dbg (dev,"phy%d OOB ready\n" , phy_no); phy->timer.expires = jiffies +HISI_SAS_WAIT_PHYUP_TIMEOUT *HZ ;add_timer (&phy->timer); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 49/314 PCI: pci-bridge-emul: Fix PCIe bit conflicts
In reply to Greg Kroah-HartmanFrom: Jon Derrick <[email protected]>
[ Upstream commit c88d19181771bd189147681ef38fc1533ebeff4c ]
This patch fixes two bit conflicts in the pci-bridge-emul driver:
1. Bit 3 of Device Status (19 of Device Control) is marked as both Write-1-to-Clear and Read-Only. It should be Write-1-to-Clear. The Read-Only and Reserved bitmasks are shifted by 1 bit due to this error.
2. Bit 12 of Slot Control is marked as both Read-Write and Reserved. It should be Read-Write.
--- drivers/pci/pci-bridge-emul.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/pci/pci-bridge-emul.c +3 -3
@@ -195,8 +195,8 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {* RO, the rest is reserved */ .w1c = GENMASK(19, 16), - .ro = GENMASK(20, 19), - .rsvd = GENMASK(31, 21), + .ro = GENMASK(21, 20), + .rsvd = GENMASK(31, 22), }, [PCI_EXP_LNKCAP / 4] = {
@@ -236,7 +236,7 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16, .ro = (PCI_EXP_SLTSTA_MRLSS |PCI_EXP_SLTSTA_PDS | PCI_EXP_SLTSTA_EIS) << 16, - .rsvd = GENMASK(15, 12) | (GENMASK(15, 9) << 16), + .rsvd = GENMASK(15, 13) | (GENMASK(15, 9) << 16), }, [PCI_EXP_RTCTL / 4] = {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 50/314 m68k/PCI: Fix a memory leak in an error handling path
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit c3f4ec050f56eeab7c1f290321f9b762c95bd332 ]
If 'ioremap' fails, we must free 'bridge', as done in other error handling path bellow.
--- arch/m68k/coldfire/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/m68k/coldfire/pci.c +3 -1
@@ -216,8 +216,10 @@ static int __init mcf_pci_init(void)/* Keep a virtual mapping to IO/config space active */ iospace = (unsigned long )ioremap (PCI_IO_PA ,PCI_IO_SIZE ); -if (iospace ==0 ) +if (iospace ==0 ) { +pci_free_host_bridge (bridge);return -ENODEV ; + }pr_info ("Coldfire: PCI IO/config window mapped to 0x%x\n" , (u32 ) iospace);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 51/314 gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
In reply to Greg Kroah-HartmanFrom: Andy Shevchenko <[email protected]>
[ Upstream commit 494a94e38dcf62543a32a4424d646ff80b4b28bd ]
Add missed acpi_gpiochip_free_interrupts() call when unregistering ports.
While at it, drop extra check to call acpi_gpiochip_request_interrupts(). There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes.
--- drivers/gpio/gpio-dwapb.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)
drivers/gpio/gpio-dwapb.c +16 -9
@@ -533,26 +533,33 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,dwapb_configure_irqs (gpio, port, pp); err =gpiochip_add_data (&port->gc, port); -if (err) +if (err) {dev_err (gpio->dev,"failed to register gpiochip for port%d\n" , port->idx); -else - port->is_registered = true; +return err; + }/* Add GPIO-signaled ACPI event support */ -if (pp->has_irq) -acpi_gpiochip_request_interrupts (&port->gc); +acpi_gpiochip_request_interrupts (&port->gc); -return err; + port->is_registered = true; + +return 0 ; }static void dwapb_gpio_unregister (struct dwapb_gpio *gpio) {unsigned int m; -for (m =0 ; m < gpio->nr_ports; ++m) -if (gpio->ports[m].is_registered) -gpiochip_remove (&gpio->ports[m].gc); +for (m =0 ; m < gpio->nr_ports; ++m) { +struct dwapb_gpio_port *port = &gpio->ports[m]; + +if (!port->is_registered) +continue ; + +acpi_gpiochip_free_interrupts (&port->gc); +gpiochip_remove (&port->gc); + } } static struct dwapb_platform_data *
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 52/314 usb: gadget: core: sync interrupt before unbind the udc
In reply to Greg Kroah-HartmanFrom: Peter Chen <[email protected]>
[ Upstream commit 3c73bc52195def14165c3a7d91bdbb33b51725f5 ]
The threaded interrupt handler may still be called after the usb_gadget_disconnect is called, it causes the structures used at interrupt handler was freed before it uses, eg the usb_request. This issue usually occurs we remove the udc function during the transfer. Below is the example when doing stress test for android switch function, the EP0's request is freed by .unbind (configfs_composite_unbind -> composite_dev_cleanup), but the threaded handler accesses this request during handling setup packet request.
In fact, there is no protection between unbind the udc and udc interrupt handling, so we have to avoid the interrupt handler is occurred or scheduled during the .unbind flow.
init: Sending signal 9 to service 'adbd' (pid 18077) process group...android_work: did not send uevent (0 0 000000007bec2039)
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms
init: Service 'adbd' (pid 18077) received signal 9
init: Sending signal 9 to service 'adbd' (pid 18077) process group...
libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms
init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14)
init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1.
init: starting service 'adbd'...
read descriptors
read strings
Unable to handle kernel read from unreadable memory at virtual address 000000000000002a
android_work: sent uevent USB_STATE=CONNECTED Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000 using random self ethernet address [000000000000002a] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 #92 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 00400085 (nzcv daIf +PAN -UAO) using random host ethernet address pc : composite_setup+0x5c/0x1730 lr : android_setup+0xc0/0x148
sp : ffff80001349bba0
x29: ffff80001349bba0 x28: ffff00083a50da00
x27: ffff8000124e6000 x26: ffff800010177950
x25: 0000000000000040 x24: ffff000834e18010
x23: 0000000000000000 x22: 0000000000000000
x21: ffff00083a50da00 x20: ffff00082e75ec40
x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fb58 x10: 0000000000000040
x9 : ffff8000120fc980 x8 : 0000000000000000
x7 : ffff00083f98df50 x6 : 0000000000000100
x5 : 00000307e8978431 x4 : ffff800011386788
x3 : 0000000000000000 x2 : ffff800012342000
x1 : 0000000000000000 x0 : ffff800010c6d3a0
Call trace: composite_setup+0x5c/0x1730 android_setup+0xc0/0x148 cdns3_ep0_delegate_req+0x64/0x90 cdns3_check_ep0_interrupt_proceed+0x384/0x738 cdns3_device_thread_irq_handler+0x124/0x6e0 cdns3_thread_irq+0x94/0xa0 irq_thread_fn+0x30/0xa0 irq_thread+0x150/0x248 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61) ---[ end trace c685db37f8773fba ]--- Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..
--- drivers/usb/gadget/udc/core.c | 2 ++ include/linux/usb/gadget.h | 2 ++ 2 files changed, 4 insertions(+)
drivers/usb/gadget/udc/core.c +2 -0
@@ -1297,6 +1297,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)kobject_uevent (&udc->dev.kobj,KOBJ_CHANGE );usb_gadget_disconnect (udc->gadget); +if (udc->gadget->irq) +synchronize_irq (udc->gadget->irq); udc->driver->unbind (udc->gadget);usb_gadget_udc_stop (udc);
include/linux/usb/gadget.h +2 -0
@@ -373,6 +373,7 @@ struct usb_gadget_ops {* @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. +* @irq: the interrupt number for device controller. * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget
@@ -427,6 +428,7 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; +int irq; };#define work_to_gadget (w) (container_of((w), struct usb_gadget, work))
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 53/314 powerpc/ptdump: Add _PAGE_COHERENT flag
In reply to Greg Kroah-HartmanFrom: Christophe Leroy <[email protected]>
[ Upstream commit 3af4786eb429b2df76cbd7ce3bae21467ac3e4fb ]
For platforms using shared.c (4xx, Book3e, Book3s/32), also handle the _PAGE_COHERENT flag which corresponds to the M bit of the WIMG flags.
--- arch/powerpc/mm/ptdump/shared.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/powerpc/mm/ptdump/shared.c +5 -0
@@ -30,6 +30,11 @@ static const struct flag_info flag_array[] = { .val = _PAGE_PRESENT, .set = "present", .clear = " ", + }, { + .mask = _PAGE_COHERENT, + .val = _PAGE_COHERENT, + .set = "coherent", + .clear = " ", }, { .mask = _PAGE_GUARDED, .val = _PAGE_GUARDED,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 54/314 mfd: wm8994: Fix driver operation if loaded as modules
In reply to Greg Kroah-HartmanFrom: Marek Szyprowski <[email protected]>
[ Upstream commit d4f9b5428b53dd67f49ee8deed8d4366ed6b1933 ]
WM8994 chip has built-in regulators, which might be used for chip operation. They are controlled by a separate wm8994-regulator driver, which should be loaded before this driver calls regulator_get(), because that driver also provides consumer-supply mapping for the them. If that driver is not yet loaded, regulator core substitute them with dummy regulator, what breaks chip operation, because the built-in regulators are never enabled. Fix this by annotating this driver with MODULE_SOFTDEP() "pre" dependency to "wm8994_regulator" module.
--- drivers/mfd/wm8994-core.c | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/wm8994-core.c +1 -0
@@ -690,3 +690,4 @@ module_i2c_driver(wm8994_i2c_driver);MODULE_DESCRIPTION ("Core support for the WM8994 audio CODEC" );MODULE_LICENSE ("GPL" );MODULE_AUTHOR ("Mark Brown <[email protected]>" ); +MODULE_SOFTDEP ("pre: wm8994_regulator" );
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 55/314 scsi: cxgb3i: Fix some leaks in init_act_open()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit b6170a49c59c27a10efed26c5a2969403e69aaba ]
There wasn't any clean up done if cxgb3_alloc_atid() failed and also the original code didn't release "csk->l2t".
--- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +14 -4
@@ -959,6 +959,7 @@ static int init_act_open(struct cxgbi_sock *csk)struct net_device *ndev = cdev->ports[csk->port_id];struct cxgbi_hba *chba = cdev->hbas[csk->port_id];struct sk_buff *skb =NULL ; +int ret;log_debug (1 <<CXGBI_DBG_TOE |1 <<CXGBI_DBG_SOCK ,"csk 0x%p,%u,0x%lx.\n" , csk, csk->state, csk->flags);
@@ -979,16 +980,16 @@ static int init_act_open(struct cxgbi_sock *csk) csk->atid =cxgb3_alloc_atid (t3dev, &t3_client, csk);if (csk->atid <0 ) {pr_err ("NO atid available.\n" ); -return -EINVAL ; + ret = -EINVAL ; + goto put_sock; }cxgbi_sock_set_flag (csk,CTPF_HAS_ATID );cxgbi_sock_get (csk); skb =alloc_wr (sizeof (struct cpl_act_open_req ),0 ,GFP_KERNEL );if (!skb) { -cxgb3_free_atid (t3dev, csk->atid); -cxgbi_sock_put (csk); -return -ENOMEM ; + ret = -ENOMEM ; + goto free_atid; } skb->sk = (struct sock *)csk;set_arp_failure_handler (skb, act_open_arp_failure);
@@ -1010,6 +1011,15 @@ static int init_act_open(struct cxgbi_sock *csk)cxgbi_sock_set_state (csk,CTP_ACTIVE_OPEN );send_act_open_req (csk, skb, csk->l2t);return 0 ; + +free_atid: +cxgb3_free_atid (t3dev, csk->atid); +put_sock: +cxgbi_sock_put (csk); +l2t_release (t3dev, csk->l2t); + csk->l2t =NULL ; + +return ret; }cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS ] = {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 56/314 clk: zynqmp: fix memory leak in zynqmp_register_clocks
In reply to Greg Kroah-HartmanFrom: Quanyang Wang <[email protected]>
[ Upstream commit 58b0fb86260063f86afecaebf4056c876fff2a19 ]
This is detected by kmemleak running on zcu102 board:
unreferenced object 0xffffffc877e48180 (size 128):
comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s) hex dump (first 32 bytes):
64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1............... backtrace:
[<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380 [<00000000f02c3809>] kvasprintf+0x7c/0x100 [<00000000e51dde4d>] kasprintf+0x60/0x80 [<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398 [<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0 [<000000005f5986f0>] platform_drv_probe+0x58/0xa8 [<00000000d5810136>] really_probe+0xd8/0x2a8 [<00000000f5b671be>] driver_probe_device+0x5c/0x100 [<0000000038f91fcf>] __device_attach_driver+0x98/0xb8 [<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8 [<000000001cb2783d>] __device_attach+0xe0/0x140 [<00000000c268031b>] device_initial_probe+0x24/0x30 [<000000006998de4b>] bus_probe_device+0x9c/0xa8 [<00000000647ae6ff>] device_add+0x3c0/0x610 [<0000000071c14bb8>] of_device_add+0x40/0x50 [<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138
This is because that when num_nodes is larger than 1, clk_out is allocated using kasprintf for these nodes but only the last node's clk_out is freed.
--- drivers/clk/zynqmp/clkc.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/clk/zynqmp/clkc.c +9 -6
@@ -558,7 +558,7 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, {int j;u32 num_nodes, clk_dev_id; -char *clk_out =NULL ; +char *clk_out[MAX_NODES ];struct clock_topology *nodes;struct clk_hw *hw =NULL ;
@@ -572,16 +572,16 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,* Intermediate clock names are postfixed with type of clock. */ if (j != (num_nodes -1 )) { - clk_out =kasprintf (GFP_KERNEL ,"%s%s" , clk_name, + clk_out[j] =kasprintf (GFP_KERNEL ,"%s%s" , clk_name, clk_type_postfix[nodes[j].type]); }else { - clk_out =kasprintf (GFP_KERNEL ,"%s" , clk_name); + clk_out[j] =kasprintf (GFP_KERNEL ,"%s" , clk_name); }if (!clk_topology[nodes[j].type])continue ; - hw = (*clk_topology[nodes[j].type])(clk_out, clk_dev_id, + hw = (*clk_topology[nodes[j].type])(clk_out[j], clk_dev_id, parent_names, num_parents, &nodes[j]);
@@ -590,9 +590,12 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, __func__, clk_dev_id, clk_name, PTR_ERR(hw)); - parent_names[0 ] = clk_out; + parent_names[0 ] = clk_out[j]; } -kfree (clk_out); + +for (j =0 ; j < num_nodes; j++) +kfree (clk_out[j]); +return hw; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 57/314 scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
In reply to Greg Kroah-HartmanFrom: Xiyu Yang <[email protected]>
[ Upstream commit 7217e6e694da3aae6d17db8a7f7460c8d4817ebf ]
In order to create or activate a new node, lpfc_els_unsol_buffer() invokes lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will return a reference of the specified lpfc_nodelist object to "ndlp" with increased refcnt.
When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), causing a refcnt leak.
Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS.
--- drivers/scsi/lpfc/lpfc_els.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/lpfc/lpfc_els.c +2 -0
@@ -8394,6 +8394,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,spin_lock_irq (shost->host_lock);if (ndlp->nlp_flag &NLP_IN_DEV_LOSS ) {spin_unlock_irq (shost->host_lock); +if (newnode) +lpfc_nlp_put (ndlp); goto dropit; }spin_unlock_irq (shost->host_lock);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 58/314 scsi: vhost: Notify TCM about the maximum sg entries supported per command
In reply to Greg Kroah-HartmanFrom: Sudhakar Panneerselvam <[email protected]>
[ Upstream commit 5ae6a6a915033bfee79e76e0c374d4f927909edc ]
vhost-scsi pre-allocates the maximum sg entries per command and if a command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that command is failed by it. This patch lets vhost communicate the max sg limit when it registers vhost_scsi_ops with TCM. With this change, TCM would report the max sg entries through "Block Limits" VPD page which will be typically queried by the SCSI initiator during device discovery. By knowing this limit, the initiator could ensure the maximum transfer length is less than or equal to what is reported by vhost-scsi.
--- drivers/vhost/scsi.c | 1 + 1 file changed, 1 insertion(+)
drivers/vhost/scsi.c +1 -0
@@ -2290,6 +2290,7 @@ static struct configfs_attribute *vhost_scsi_wwn_attrs[] = {static const struct target_core_fabric_ops vhost_scsi_ops = { .module =THIS_MODULE , .fabric_name ="vhost" , + .max_data_sg_nents =VHOST_SCSI_PREALLOC_SGLS , .tpg_get_wwn = vhost_scsi_get_fabric_wwn, .tpg_get_tag = vhost_scsi_get_tpgt, .tpg_check_demo_mode = vhost_scsi_check_true,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 59/314 clk: clk-flexgen: fix clock-critical handling
In reply to Greg Kroah-HartmanFrom: Alain Volmat <[email protected]>
[ Upstream commit a403bbab1a73d798728d76931cab3ff0399b9560 ]
Fixes an issue leading to having all clocks following a critical clocks marked as well as criticals.
--- drivers/clk/st/clk-flexgen.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/st/clk-flexgen.c +1 -0
@@ -375,6 +375,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)break ; } + flex_flags &= ~CLK_IS_CRITICAL ;of_clk_detect_critical (np, i, &flex_flags);/*
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 60/314 IB/mlx5: Fix DEVX support for MLX5_CMD_OP_INIT2INIT_QP command
In reply to Greg Kroah-HartmanFrom: Mark Zhang <[email protected]>
[ Upstream commit d246a3061528be6d852156d25c02ea69d6db7e65 ]
The commit citied in the Fixes line wasn't complete and solved only part of the problems. Update the mlx5_ib to properly support MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when modify the QP tx_port_affinity.
--- drivers/infiniband/hw/mlx5/devx.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/infiniband/hw/mlx5/devx.c +4 -0
@@ -489,6 +489,10 @@ static u64 devx_get_obj_id(const void *in) obj_id =get_enc_obj_id (MLX5_CMD_OP_CREATE_QP ,MLX5_GET (rst2init_qp_in, in, qpn));break ; +case MLX5_CMD_OP_INIT2INIT_QP : + obj_id =get_enc_obj_id (MLX5_CMD_OP_CREATE_QP , +MLX5_GET (init2init_qp_in, in, qpn)); +break ;case MLX5_CMD_OP_INIT2RTR_QP : obj_id =get_enc_obj_id (MLX5_CMD_OP_CREATE_QP ,MLX5_GET (init2rtr_qp_in, in, qpn));
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 61/314 powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run
In reply to Greg Kroah-HartmanFrom: Kajol Jain <[email protected]>
[ Upstream commit b4ac18eead28611ff470d0f47a35c4e0ac080d9c ]
Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter values")' added to print _change_ in the counter value rather then raw value for 24x7 counters. Incase of transactions, the event count is set to 0 at the beginning of the transaction. It also sets the event's prev_count to the raw value at the time of initialization. Because of setting event count to 0, we are seeing some weird behaviour, whenever we run multiple 24x7 events at a time.
For example:
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/Getting these large values in case we do -I.
As we are setting event_count to 0, for interval case, overall event_count is not coming in incremental order. As we may can get new delta lesser then previous count. Because of which when we print intervals, we are getting negative value which create these large values.
This patch removes part where we set event_count to 0 in function 'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count to the raw value at the time of initialization to print change value.
With this patch
In power9 platform
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/--- arch/powerpc/perf/hv-24x7.c | 10 ---------- 1 file changed, 10 deletions(-)
arch/powerpc/perf/hv-24x7.c +0 -10
@@ -1400,16 +1400,6 @@ static void h_24x7_event_read(struct perf_event *event) h24x7hw = &get_cpu_var (hv_24x7_hw); h24x7hw->events[i] = event;put_cpu_var (h24x7hw); -/* -* Clear the event count so we can compute the _change_ -* in the 24x7 raw counter value at the end of the txn. -* -* Note that we could alternatively read the 24x7 value -* now and save its value in event->hw.prev_count. But -* that would require issuing a hcall, which would then -* defeat the purpose of using the txn interface. -*/ -local64_set (&event->count,0 ); }put_cpu_var (hv_24x7_reqb);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 62/314 nfsd: Fix svc_xprt refcnt leak when setup callback client failed
In reply to Greg Kroah-HartmanFrom: Xiyu Yang <[email protected]>
[ Upstream commit a4abc6b12eb1f7a533c2e7484cfa555454ff0977 ]
nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the refcount of the "c->cn_xprt".
The reference counting issue happens in one exception handling path of nfsd4_process_cb_update(). When setup callback client failed, the function forgets to decrease the refcnt increased by svc_xprt_get(), causing a refcnt leak.
Fix this issue by calling svc_xprt_put() when setup callback client failed.
--- fs/nfsd/nfs4callback.c | 2 ++ 1 file changed, 2 insertions(+)
fs/nfsd/nfs4callback.c +2 -0
@@ -1230,6 +1230,8 @@ static void nfsd4_process_cb_update(struct nfsd4_callback *cb) err =setup_callback_client (clp, &conn, ses);if (err) {nfsd4_mark_cb_down (clp, err); +if (c) +svc_xprt_put (c->cn_xprt);return ; } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 63/314 PCI: vmd: Filter resource type bits from shadow register
In reply to Greg Kroah-HartmanFrom: Jon Derrick <[email protected]>
[ Upstream commit 3e5095eebe015d5a4d566aa5e03c8621add5f0a7 ]
Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back.
Example:
pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]
Expected:
pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]
If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices.
--- drivers/pci/controller/vmd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/pci/controller/vmd.c +4 -2
@@ -593,9 +593,11 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)if (!membar2)return -ENOMEM ; offset[0 ] = vmd->dev->resource[VMD_MEMBAR1 ].start - -readq (membar2 +MB2_SHADOW_OFFSET ); + (readq (membar2 +MB2_SHADOW_OFFSET ) & +PCI_BASE_ADDRESS_MEM_MASK ); offset[1 ] = vmd->dev->resource[VMD_MEMBAR2 ].start - -readq (membar2 +MB2_SHADOW_OFFSET +8 ); + (readq (membar2 +MB2_SHADOW_OFFSET +8 ) & +PCI_BASE_ADDRESS_MEM_MASK );pci_iounmap (vmd->dev, membar2); } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 64/314 RDMA/core: Fix several reference count leaks.
In reply to Greg Kroah-HartmanFrom: Qiushi Wu <[email protected]>
[ Upstream commit 0b8e125e213204508e1b3c4bdfe69713280b7abd ]
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous
commit b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem.
--- drivers/infiniband/core/sysfs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/core/sysfs.c +5 -5
@@ -1060,8 +1060,7 @@ static int add_port(struct ib_core_device *coredev, int port_num) coredev->ports_kobj, "%d", port_num);if (ret) { -kfree (p); -return ret; + goto err_put; } p->gid_attr_group =kzalloc (sizeof (*p->gid_attr_group),GFP_KERNEL );
@@ -1074,8 +1073,7 @@ static int add_port(struct ib_core_device *coredev, int port_num) ret =kobject_init_and_add (&p->gid_attr_group->kobj, &gid_attr_type, &p->kobj,"gid_attrs" );if (ret) { -kfree (p->gid_attr_group); - goto err_put; + goto err_put_gid_attrs; }if (device->ops.process_mad && is_full_dev) {
@@ -1406,8 +1404,10 @@ int ib_port_register_module_stat(struct ib_device *device, u8 port_num, ret =kobject_init_and_add (kobj, ktype, &port->kobj,"%s" , name); -if (ret) +if (ret) { +kobject_put (kobj);return ret; + } }return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 65/314 cifs: set up next DFS target before generic_ip_connect()
In reply to Greg Kroah-HartmanFrom: Paulo Alcantara <[email protected]>
[ Upstream commit aaa3aef34d3ab9499a5c7633823429f7a24e6dff ]
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to \FOO\share1 but server->hostname will have "FOO.COM". The reason is because both "FS0" and "FS0.FOO.COM" resolve to same IP address and they share same TCP server connection, but "FS0.FOO.COM" was the first hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...it successfully reconnects to "FS0" server but does not set up next DFS target - which should be the same target server "\FS0\share1" - and server->hostname remains set to "FS0.FOO.COM" rather than "FS0", as reconn_inval_dfs_target() would have it set to "FS0" if called earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before generic_ip_connect() so server->hostname will get updated correctly prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover" patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to the same ip address.
--- fs/cifs/connect.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
fs/cifs/connect.c +9 -9
@@ -614,26 +614,26 @@ cifs_reconnect(struct TCP_Server_Info *server)try_to_freeze ();mutex_lock (&server->srv_mutex); +#ifdef CONFIG_CIFS_DFS_UPCALL /* * Set up next DFS target server (if any) for reconnect. If DFS * feature is disabled, then we will retry last server we * connected to before. */ +reconn_inval_dfs_target (server, cifs_sb, &tgt_list, &tgt_it); +#endif + rc =reconn_set_ipaddr (server); +if (rc) { +cifs_dbg (FYI ,"%s: failed to resolve hostname: %d\n" , + __func__, rc); + } +if (cifs_rdma_enabled (server)) rc =smbd_reconnect (server);else rc =generic_ip_connect (server);if (rc) {cifs_dbg (FYI ,"reconnect error %d\n" , rc); -#ifdef CONFIG_CIFS_DFS_UPCALL -reconn_inval_dfs_target (server, cifs_sb, &tgt_list, - &tgt_it); -#endif - rc =reconn_set_ipaddr (server); -if (rc) { -cifs_dbg (FYI ,"%s: failed to resolve hostname: %d\n" , - __func__, rc); - }mutex_unlock (&server->srv_mutex);msleep (3000 ); }else {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 66/314 ASoC: qcom: q6asm-dai: kCFI fix
In reply to Greg Kroah-HartmanFrom: John Stultz <[email protected]>
[ Upstream commit a6b675a89e51a1cdad0481b809b7840d3f86e4b5 ]
Fixes the following kCFI crash seen on db845c, caused by the function prototypes not matching the callback function prototype.
[ 82.585661] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001 [ 82.595387] Mem abort info: [ 82.599463] ESR = 0x96000005 [ 82.602658] EC = 0x25: DABT (current EL), IL = 32 bits [ 82.608177] SET = 0, FnV = 0 [ 82.611829] EA = 0, S1PTW = 0 [ 82.615369] Data abort info: [ 82.618751] ISV = 0, ISS = 0x00000005 [ 82.622641] CM = 0, WnR = 0 [ 82.625774] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000174259000 [ 82.632292] [0000000000000001] pgd=0000000000000000, pud=0000000000000000 [ 82.639167] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 82.644795] Modules linked in: hci_uart btqca xhci_plat_hcd xhci_pci_renesas xhci_pci xhci_hcd wcn36xx wcnss_ctrl wcd934x vctrl_regulator ufs_qcom syscon_reboot_e [ 82.644927] qcom_apcs_ipc_mailbox q6asm_dai q6routing q6asm q6afe_dai q6adm q6afe q6core q6dsp_common pm8941_pwrkey pm8916_wdt platform_mhu pinctrl_spmi_mpp pine [ 82.812982] CPU: 3 PID: 240 Comm: kworker/u16:4 Tainted: G W 5.6.0-rc7-mainline-00960-g0c34353d11b9-dirty #1 [ 82.824201] Hardware name: Thundercomm Dragonboard 845c (DT) [ 82.829937] Workqueue: qcom_apr_rx apr_rxwq [apr] [ 82.834698] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 82.839553] pc : __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.844754] lr : __cfi_check+0x3a8/0x3b0 [q6asm_dai] [ 82.849767] sp : ffffffc0105f3c20 [ 82.853123] x29: ffffffc0105f3c30 x28: 0000000000000020 [ 82.858489] x27: ffffff80f4588400 x26: ffffff80f458ec94 [ 82.863854] x25: ffffff80f458ece8 x24: ffffffe3670c7000 [ 82.869220] x23: ffffff8094bb7b34 x22: ffffffe367137000 [ 82.874585] x21: bd07909b332eada6 x20: 0000000000000001 [ 82.879950] x19: ffffffe36713863c x18: ffffff80f8df4430 [ 82.885316] x17: 0000000000000001 x16: ffffffe39d15e660 [ 82.890681] x15: 0000000000000001 x14: 0000000000000027 [ 82.896047] x13: 0000000000000000 x12: ffffffe39e6465a0 [ 82.901413] x11: 0000000000000051 x10: 000000000000ffff [ 82.906779] x9 : 000ffffffe366c19 x8 : c3c5f18762d1ceef [ 82.912145] x7 : 0000000000000000 x6 : ffffffc010877698 [ 82.917511] x5 : ffffffc0105f3c00 x4 : 0000000000000000 [ 82.922877] x3 : 0000000000000000 x2 : 0000000000000001 [ 82.928243] x1 : ffffffe36713863c x0 : 0000000000000001 [ 82.933610] Call trace: [ 82.936099] __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.940955] q6asm_srvc_callback+0x22c/0x618 [q6asm] [ 82.945973] apr_rxwq+0x1a8/0x27c [apr] [ 82.949861] process_one_work+0x2e8/0x54c [ 82.953919] worker_thread+0x27c/0x4d4 [ 82.957715] kthread+0x144/0x154 [ 82.960985] ret_from_fork+0x10/0x18 [ 82.964603] Code: a8c37bfd f85f8e5e d65f03c0 b40000a0 (39400008) [ 82.970762] ---[ end trace 410accb839617143 ]--- [ 82.975429] Kernel panic - not syncing: Fatal exception
--- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/qcom/qdsp6/q6asm-dai.c +2 -2
@@ -171,7 +171,7 @@ static const struct snd_compr_codec_caps q6asm_compr_caps = { };static void event_handler (uint32_t opcode,uint32_t token, -uint32_t *payload,void *priv) +void *payload,void *priv) {struct q6asm_dai_rtd *prtd = priv;struct snd_pcm_substream *substream = prtd->substream;
@@ -494,7 +494,7 @@ static struct snd_pcm_ops q6asm_dai_ops = { };static void compress_event_handler (uint32_t opcode,uint32_t token, -uint32_t *payload,void *priv) +void *payload,void *priv) {struct q6asm_dai_rtd *prtd = priv;struct snd_compr_stream *substream = prtd->cstream;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 67/314 powerpc/crashkernel: Take "mem=" option into account
In reply to Greg Kroah-HartmanFrom: Pingfan Liu <[email protected]>
[ Upstream commit be5470e0c285a68dc3afdea965032f5ddc8269d7 ]
'mem=" option is an easy way to put high pressure on memory during some test. Hence after applying the memory limit, instead of total mem, the actual usable memory should be considered when reserving mem for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if passing crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G", and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on fadump and kdump reservation than on "mem=". Referring the following code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);While on other arches, the effect of "mem=" takes a higher priority and pass through memblock_phys_mem_size() before calling reserve_crashkernel().
--- arch/powerpc/kernel/machine_kexec.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch/powerpc/kernel/machine_kexec.c +5 -3
@@ -114,11 +114,12 @@ void machine_kexec(struct kimage *image)void __init reserve_crashkernel (void ) { -unsigned long long crash_size, crash_base; +unsigned long long crash_size, crash_base, total_mem_sz;int ret; + total_mem_sz = memory_limit ? memory_limit :memblock_phys_mem_size ();/* use common parsing */ - ret =parse_crashkernel (boot_command_line,memblock_phys_mem_size (), + ret =parse_crashkernel (boot_command_line, total_mem_sz, &crash_size, &crash_base);if (ret ==0 && crash_size >0 ) { crashk_res.start = crash_base;
@@ -177,6 +178,7 @@ void __init reserve_crashkernel(void)/* Crash kernel trumps memory limit */ if (memory_limit && memory_limit <= crashk_res.end) { memory_limit = crashk_res.end +1 ; + total_mem_sz = memory_limit;printk ("Adjusted memory limit for crashkernel, now 0x%llx\n" , memory_limit); }
@@ -185,7 +187,7 @@ void __init reserve_crashkernel(void)"for crashkernel (System RAM: %ldMB)\n" , (unsigned long )(crash_size >>20 ), (unsigned long )(crashk_res.start >>20 ), - (unsigned long)(memblock_phys_mem_size() >> 20)); + (unsigned long)(total_mem_sz >> 20));if (!memblock_is_region_memory (crashk_res.start, crash_size) ||memblock_reserve (crashk_res.start, crash_size)) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 68/314 pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
In reply to Greg Kroah-HartmanFrom: Navid Emamdoost <[email protected]>
[ Upstream commit ca162ce98110b98e7d97b7157328d34dcfdd40a9 ]
Even in failed case of pm_runtime_get_sync(), the usage_count is incremented. In order to keep the usage_count with correct value call appropriate pm_runtime_put().
--- drivers/pwm/pwm-img.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/pwm/pwm-img.c +6 -2
@@ -129,8 +129,10 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty =DIV_ROUND_UP (timebase * duty_ns, period_ns); ret =pm_runtime_get_sync (chip->dev); -if (ret <0 ) +if (ret <0 ) { +pm_runtime_put_autosuspend (chip->dev);return ret; + } val =img_pwm_readl (pwm_chip,PWM_CTRL_CFG ); val &= ~(PWM_CTRL_CFG_DIV_MASK <<PWM_CTRL_CFG_DIV_SHIFT (pwm->hwpwm));
@@ -331,8 +333,10 @@ static int img_pwm_remove(struct platform_device *pdev)int ret; ret =pm_runtime_get_sync (&pdev->dev); -if (ret <0 ) +if (ret <0 ) { +pm_runtime_put (&pdev->dev);return ret; + }for (i =0 ; i < pwm_chip->chip.npwm; i++) { val =img_pwm_readl (pwm_chip,PWM_CTRL_CFG );
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 69/314 sparc32: mm: Dont try to free page-table pages if ctor() fails
In reply to Greg Kroah-HartmanFrom: Will Deacon <[email protected]>
[ Upstream commit 454b0289c6b5f2c66164654b80212d15fbef7a03 ]
The pages backing page-table allocations for SRMMU are allocated via memblock as part of the "nocache" region initialisation during srmmu_paging_init() and should not be freed even if a later call to pgtable_pte_page_ctor() fails.
Remove the broken call to __free_page().
--- arch/sparc/mm/srmmu.c | 1 - 1 file changed, 1 deletion(-)
arch/sparc/mm/srmmu.c +0 -1
@@ -379,7 +379,6 @@ pgtable_t pte_alloc_one(struct mm_struct *mm)return NULL ; page =pfn_to_page (__nocache_pa (pte) >>PAGE_SHIFT );if (!pgtable_pte_page_ctor (page)) { -__free_page (page);return NULL ; }return page;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 70/314 yam: fix possible memory leak in yam_init_driver
In reply to Greg Kroah-HartmanFrom: Wang Hai <[email protected]>
[ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ]
If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur.
--- drivers/net/hamradio/yam.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/hamradio/yam.c +1 -0
@@ -1133,6 +1133,7 @@ static int __init yam_init_driver(void) err =register_netdev (dev);if (err) {printk (KERN_WARNING "yam: cannot register net device %s\n" , dev->name); +free_netdev (dev); goto error; } yam_devs[i] = dev;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 71/314 NTB: ntb_pingpong: Choose doorbells based on port number
In reply to Greg Kroah-HartmanFrom: Logan Gunthorpe <[email protected]>
[ Upstream commit ca93c45755da98302c93abdd788fc09113baf9e0 ]
This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry.
Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand.
--- drivers/ntb/test/ntb_pingpong.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/ntb/test/ntb_pingpong.c +6 -8
@@ -121,15 +121,14 @@ static int pp_find_next_peer(struct pp_ctx *pp) link =ntb_link_is_up (pp->ntb,NULL ,NULL );/* Find next available peer */ -if (link & pp->nmask) { +if (link & pp->nmask) pidx =__ffs64 (link & pp->nmask); - out_db =BIT_ULL (pidx +1 ); - }else if (link & pp->pmask) { +else if (link & pp->pmask) pidx =__ffs64 (link & pp->pmask); - out_db =BIT_ULL (pidx); - }else { +else return -ENODEV ; - } + + out_db =BIT_ULL (ntb_peer_port_number (pp->ntb, pidx));spin_lock (&pp->lock); pp->out_pidx = pidx;
@@ -303,7 +302,7 @@ static void pp_init_flds(struct pp_ctx *pp)break ; } - pp->in_db =BIT_ULL (pidx); + pp->in_db =BIT_ULL (lport); pp->pmask =GENMASK_ULL (pidx,0 ) >>1 ; pp->nmask =GENMASK_ULL (pcnt -1 , pidx);
@@ -435,4 +434,3 @@ static void __exit pp_exit(void)debugfs_remove_recursive (pp_dbgfs_topdir); }module_exit (pp_exit); -
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 72/314 NTB: Fix the default port and peer numbers for legacy drivers
In reply to Greg Kroah-HartmanFrom: Logan Gunthorpe <[email protected]>
[ Upstream commit fc8b086d9dbd57458d136c4fa70ee26f832c3a2e ]
When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed.
When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed.
Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible.
Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side.
--- drivers/ntb/core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/ntb/core.c +2 -6
@@ -214,10 +214,8 @@ int ntb_default_port_number(struct ntb_dev *ntb)case NTB_TOPO_B2B_DSD :return NTB_PORT_SEC_DSD ;default : -break ; +return 0 ; } - -return -EINVAL ; }EXPORT_SYMBOL (ntb_default_port_number);
@@ -240,10 +238,8 @@ int ntb_default_peer_port_number(struct ntb_dev *ntb, int pidx)case NTB_TOPO_B2B_DSD :return NTB_PORT_PRI_USD ;default : -break ; +return 0 ; } - -return -EINVAL ; }EXPORT_SYMBOL (ntb_default_peer_port_number);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 73/314 mksysmap: Fix the mismatch of .L symbols in System.map
In reply to Greg Kroah-HartmanFrom: ashimida <[email protected]>
[ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ]
When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped.
--- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/mksysmap +1 -1
@@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( .L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 74/314 apparmor: fix introspection of of task mode for unconfined tasks
In reply to Greg Kroah-HartmanFrom: John Johansen <[email protected]>
[ Upstream commit dd2569fbb053719f7df7ef8fdbb45cf47156a701 ]
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the ns->unconfined profile then. Mode the mode is always reported as -
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 1287 pts/0 00:00:01 bash
test (-) 1892 pts/0 00:00:00 psinstead of the correct value of (unconfined) as shown below
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 2483 pts/0 00:00:01 bash
test (unconfined) 3591 pts/0 00:00:00 ps2. if a task is confined by a stack of profiles that are unconfined the output of label mode is again the incorrect value of (-) like above, instead of (unconfined). This is because the visibile profile count increment is skipped by the special casing of unconfined.
--- security/apparmor/label.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
security/apparmor/label.c +2 -2
@@ -1531,13 +1531,13 @@ static const char *label_modename(struct aa_ns *ns, struct aa_label *label,label_for_each (i, label, profile) {if (aa_ns_visible (ns, profile->ns, flags &FLAG_VIEW_SUBNS )) { -if (profile->mode ==APPARMOR_UNCONFINED ) + count++; +if (profile == profile->ns->unconfined)/* special case unconfined so stacks with * unconfined don't report as mixed. ie. * profile_foo//&:ns1:unconfined (mixed) */ continue ; - count++;if (mode ==-1 ) mode = profile->mode;else if (mode != profile->mode)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 75/314 net: dsa: lantiq_gswip: fix and improve the unsupported interface error
In reply to Greg Kroah-HartmanFrom: Martin Blumenstingl <[email protected]>
[ Upstream commit 4d3da2d8d91f66988a829a18a0ce59945e8ae4fb ]
While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times:
Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake.
--- drivers/net/dsa/lantiq_gswip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/dsa/lantiq_gswip.c +2 -1
@@ -1451,7 +1451,8 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port, unsupported:bitmap_zero (supported, __ETHTOOL_LINK_MODE_MASK_NBITS); -dev_err (ds->dev,"Unsupported interface: %d\n" , state->interface); +dev_err (ds->dev,"Unsupported interface '%s' for port %d\n" , +phy_modes (state->interface), port);return ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 76/314 apparmor: check/put label on apparmor_sk_clone_security()
In reply to Greg Kroah-HartmanFrom: Mauricio Faria de Oliveira <[email protected]>
[ Upstream commit 3b646abc5bc6c0df649daea4c2c976bd4d47e4c8 ]
Currently apparmor_sk_clone_security() does not check for existing label/peer in the 'new' struct sock; it just overwrites it, if any (with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk,
struct sock *newsk)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label);
new->peer = aa_get_label(ctx->peer);
}This might leak label references, which might overflow under load. Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...)
...
if (sock->sk) {
struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label);
ctx->label = aa_get_label(label);
}
...Context:
-------
The label reference count leak is observed if apparmor_sock_graft() is called previously: this sets the 'ctx->label' field by getting a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label)
ctx->label = aa_get_current_label();
}And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
...
struct sock *sk2;
...
sk2 = sk_alloc(...);
...
security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
...Apparently both calls are done on their own right, especially for other LSMs, being introduced in 2010/2014, before apparmor socket mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case:
---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <linux/if_alg.h> int main() {
int sockfd;
struct sockaddr_alg sa;
/* Setup the crypto API socket */
sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
if (sockfd < 0) {
perror("socket");
return 1;
}
memset(&sa, 0, sizeof(sa));
sa.salg_family = AF_ALG;
strcpy((char *) sa.salg_type, "rng");
strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
perror("bind");
return 1;
}
/* Accept a "connection" and close it; repeat. */
while (!close(accept(sockfd, NULL, 0)));
return 0;
}
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg
<a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
...
[ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
...
[ 9928.514286] security_sk_clone+0x33/0x50
[ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg]
[ 9928.516091] alg_accept+0x15/0x20 [af_alg]
[ 9928.516682] SYSC_accept4+0xff/0x210
[ 9928.519609] SyS_accept+0x10/0x20
[ 9928.520190] do_syscall_64+0x73/0x130
[ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2Note that other messages may be seen, not just overflow, depending on the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory.
...
[ 7273.185789] refcount_t: underflow; use-after-free.Kprobes:
-------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits:
-------
[1] commit 507cad355fc9 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit 4c63f83c2c2e ("crypto: af_alg - properly label AF_ALG socket")
[3] commit 2acce6aa9f65 ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
--- security/apparmor/lsm.c | 5 +++++ 1 file changed, 5 insertions(+)
security/apparmor/lsm.c +5 -0
@@ -791,7 +791,12 @@ static void apparmor_sk_clone_security(const struct sock *sk,struct aa_sk_ctx *ctx =SK_CTX (sk);struct aa_sk_ctx *new =SK_CTX (newsk); +if (new->label) +aa_put_label (new->label); new->label =aa_get_label (ctx->label); + +if (new->peer) +aa_put_label (new->peer); new->peer =aa_get_label (ctx->peer); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 77/314 f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
In reply to Greg Kroah-HartmanFrom: Chao Yu <[email protected]>
[ Upstream commit 8626441f05dc45a2f4693ee6863d02456ce39e60 ]
If mountpoint is readonly, we should allow shutdowning filesystem successfully, this fixes issue found by generic/599 testcase of xfstest.
--- fs/f2fs/file.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
fs/f2fs/file.c +8 -1
@@ -2056,8 +2056,15 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)if (in !=F2FS_GOING_DOWN_FULLSYNC ) { ret =mnt_want_write_file (filp); -if (ret) +if (ret) { +if (ret == -EROFS ) { + ret =0 ; +f2fs_stop_checkpoint (sbi, false); +set_sbi_flag (sbi,SBI_IS_SHUTDOWN ); +trace_f2fs_shutdown (sbi, in, ret); + }return ret; + } }switch (in) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 78/314 ASoC: meson: add missing free_irq() in error path
In reply to Greg Kroah-HartmanFrom: Pavel Machek (CIP) <[email protected]>
[ Upstream commit 3b8a299a58b2afce464ae11324b59dcf0f1d10a7 ]
free_irq() is missing in case of error, fix that.
--- sound/soc/meson/axg-fifo.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
sound/soc/meson/axg-fifo.c +8 -2
@@ -244,7 +244,7 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss)/* Enable pclk to access registers and clock the fifo ip */ ret =clk_prepare_enable (fifo->pclk);if (ret) -return ret; + goto free_irq;/* Setup status2 so it reports the memory pointer */ regmap_update_bits(fifo->map, FIFO_CTRL1,
@@ -264,8 +264,14 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss)/* Take memory arbitror out of reset */ ret =reset_control_deassert (fifo->arb);if (ret) -clk_disable_unprepare (fifo->pclk); + goto free_clk; + +return 0 ; +free_clk: +clk_disable_unprepare (fifo->pclk); +free_irq: +free_irq (fifo->irq, ss);return ret; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 79/314 bpf, sockhash: Fix memory leak when unlinking sockets in sock_hash_free
In reply to Greg Kroah-HartmanFrom: Jakub Sitnicki <[email protected]>
[ Upstream commit 33a7c831565c43a7ee2f38c7df4c4a40e1dfdfed ]
When sockhash gets destroyed while sockets are still linked to it, we will walk the bucket lists and delete the links. However, we are not freeing the list elements after processing them, leaking the memory.
The leak can be triggered by close()'ing a sockhash map when it still contains sockets, and observed with kmemleak:
unreferenced object 0xffff888116e86f00 (size 64):
comm "race_sock_unlin", pid 223, jiffies 4294731063 (age 217.404s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
81 de e8 41 00 00 00 00 c0 69 2f 15 81 88 ff ff ...A.....i/.....
backtrace:
[<00000000dd089ebb>] sock_hash_update_common+0x4ca/0x760
[<00000000b8219bd5>] sock_hash_update_elem+0x1d2/0x200
[<000000005e2c23de>] __do_sys_bpf+0x2046/0x2990
[<00000000d0084618>] do_syscall_64+0xad/0x9a0
[<000000000d96f263>] entry_SYSCALL_64_after_hwframe+0x49/0xb3Fix it by freeing the list element when we're done with it.
--- net/core/sock_map.c | 1 + 1 file changed, 1 insertion(+)
net/core/sock_map.c +1 -0
@@ -879,6 +879,7 @@ static void sock_hash_free(struct bpf_map *map)sock_map_unref (elem->sk, elem);rcu_read_unlock ();release_sock (elem->sk); +sock_hash_free_elem (htab, elem); } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 80/314 scsi: sr: Fix sr_probe() missing deallocate of device minor
In reply to Greg Kroah-HartmanFrom: Simon Arlott <[email protected]>
[ Upstream commit 6555781b3fdec5e94e6914511496144241df7dee ]
If the cdrom fails to be registered then the device minor should be deallocated.
--- drivers/scsi/sr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/scsi/sr.c +5 -1
@@ -750,7 +750,7 @@ static int sr_probe(struct device *dev) cd->cdi.disk = disk;if (register_cdrom (&cd->cdi)) - goto fail_put; + goto fail_minor;/* * Initialize block layer runtime PM stuffs before the
@@ -768,6 +768,10 @@ static int sr_probe(struct device *dev)return 0 ; +fail_minor: +spin_lock (&sr_index_lock); +clear_bit (minor, sr_index_bits); +spin_unlock (&sr_index_lock); fail_put:put_disk (disk); fail_free:
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 81/314 scsi: ibmvscsi: Dont send host info in adapter info MAD after LPM
In reply to Greg Kroah-HartmanFrom: Tyrel Datwyler <[email protected]>
[ Upstream commit 4919b33b63c8b69d8dcf2b867431d0e3b6dc6d28 ]
The adapter info MAD is used to send the client info and receive the host info as a response. A persistent buffer is used and as such the client info is overwritten after the response. During the course of a normal adapter reset the client info is refreshed in the buffer in preparation for sending the adapter info MAD.
However, in the special case of LPM where we reenable the CRQ instead of a full CRQ teardown and reset we fail to refresh the client info in the adapter info buffer. As a result, after Live Partition Migration (LPM) we erroneously report the host's info as our own.
[mkp: typos]
--- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/ibmvscsi/ibmvscsi.c +2 -0
@@ -415,6 +415,8 @@ static int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,int rc =0 ;struct vio_dev *vdev =to_vio_dev (hostdata->dev); +set_adapter_info (hostdata); +/* Re-enable the CRQ */ do { if (rc)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 82/314 apparmor: fix nnp subset test for unconfined
In reply to Greg Kroah-HartmanFrom: John Johansen <[email protected]>
[ Upstream commit 3ed4aaa94fc07db3cd0c91be95e3e1b9782a2710 ]
The subset test is not taking into account the unconfined exception which will cause profile transitions in the stacked confinement case to fail when no_new_privs is applied.
This fixes a regression introduced in the fix for
https://bugs.launchpad.net/bugs/1839037
--- security/apparmor/domain.c | 9 +++++---- security/apparmor/include/label.h | 1 + security/apparmor/label.c | 33 +++++++++++++++++++++++++++++++ 3 files changed, 39 insertions(+), 4 deletions(-)
security/apparmor/domain.c +5 -4
@@ -935,7 +935,8 @@ int apparmor_bprm_set_creds(struct linux_binprm *bprm)* aways results in a further reduction of permissions. */ if ((bprm->unsafe &LSM_UNSAFE_NO_NEW_PRIVS ) && - !unconfined (label) && !aa_label_is_subset (new, ctx->nnp)) { + !unconfined (label) && + !aa_label_is_unconfined_subset (new, ctx->nnp)) { error = -EPERM ; info ="no new privs" ; goto audit;
@@ -1213,7 +1214,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags)* reduce restrictions. */ if (task_no_new_privs (current) && !unconfined (label) && - !aa_label_is_subset (new, ctx->nnp)) { + !aa_label_is_unconfined_subset (new, ctx->nnp)) {/* not an apparmor denial per se, so don't log it */ AA_DEBUG ("no_new_privs - change_hat denied" ); error = -EPERM ;
@@ -1234,7 +1235,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags)* reduce restrictions. */ if (task_no_new_privs (current) && !unconfined (label) && - !aa_label_is_subset (previous, ctx->nnp)) { + !aa_label_is_unconfined_subset (previous, ctx->nnp)) {/* not an apparmor denial per se, so don't log it */ AA_DEBUG ("no_new_privs - change_hat denied" ); error = -EPERM ;
@@ -1429,7 +1430,7 @@ check:* reduce restrictions. */ if (task_no_new_privs (current) && !unconfined (label) && - !aa_label_is_subset (new, ctx->nnp)) { + !aa_label_is_unconfined_subset (new, ctx->nnp)) {/* not an apparmor denial per se, so don't log it */ AA_DEBUG ("no_new_privs - change_hat denied" ); error = -EPERM ;
security/apparmor/include/label.h +1 -0
@@ -281,6 +281,7 @@ bool aa_label_init(struct aa_label *label, int size, gfp_t gfp);struct aa_label *aa_label_alloc (int size,struct aa_proxy *proxy,gfp_t gfp);bool aa_label_is_subset (struct aa_label *set,struct aa_label *sub); +bool aa_label_is_unconfined_subset (struct aa_label *set,struct aa_label *sub);struct aa_profile *__aa_label_next_not_in_set (struct label_it *I ,struct aa_label *set,struct aa_label *sub);
security/apparmor/label.c +33 -0
@@ -550,6 +550,39 @@ bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub)return __aa_label_next_not_in_set (&i, set, sub) ==NULL ; } +/** +* aa_label_is_unconfined_subset - test if @sub is a subset of @set +* @set: label to test against +* @sub: label to test if is subset of @set +* +* This checks for subset but taking into account unconfined. IF +* @sub contains an unconfined profile that does not have a matching +* unconfined in @set then this will not cause the test to fail. +* Conversely we don't care about an unconfined in @set that is not in +* @sub +* +* Returns: true if @sub is special_subset of @set +* else false +*/ +bool aa_label_is_unconfined_subset (struct aa_label *set,struct aa_label *sub) +{ +struct label_it i = { }; +struct aa_profile *p; + +AA_BUG (!set); +AA_BUG (!sub); + +if (sub == set) +return true; + +do { + p =__aa_label_next_not_in_set (&i, set, sub); +if (p && !profile_unconfined (p)) +break ; + }while (p); + +return p ==NULL ; +}/**
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 83/314 x86/purgatory: Disable various profiling and sanitizing options
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit e2ac07c06058ae2d58b45bbf2a2a352771d76fcb ]
Since the purgatory is a special stand-alone binary, various profiling and sanitizing options must be disabled. Having these options enabled typically will cause dependencies on various special symbols exported by special libs / stubs used by these frameworks. Since the purgatory is special, it is not linked against these stubs causing missing symbols in the purgatory if these options are not disabled.
Sync the set of disabled profiling and sanitizing options with that from drivers/firmware/efi/libstub/Makefile, adding -DDISABLE_BRANCH_PROFILING to the CFLAGS and setting:
GCOV_PROFILE := n
UBSAN_SANITIZE := n
This fixes broken references to ftrace_likely_update() when CONFIG_TRACE_BRANCH_PROFILING is enabled and to __gcov_init() and __gcov_exit() when CONFIG_GCOV_KERNEL is enabled.
--- arch/x86/purgatory/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
arch/x86/purgatory/Makefile +4 -1
@@ -17,7 +17,10 @@ CFLAGS_sha256.o := -D__DISABLE_EXPORTS LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined -nostdlib -z nodefaultlib targets += purgatory.ro +# Sanitizer, etc. runtimes are unavailable and cannot be linked here. +GCOV_PROFILE := n KASAN_SANITIZE := n +UBSAN_SANITIZE := n KCOV_INSTRUMENT := n # These are adjustments to the compiler flags used for objects that
@@ -25,7 +28,7 @@ KCOV_INSTRUMENT := n PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss -PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) +PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That # in turn leaves some undefined symbols like __fentry__ in purgatory and not
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 84/314 staging: greybus: fix a missing-check bug in gb_lights_light_config()
In reply to Greg Kroah-HartmanFrom: Chen Zhou <[email protected]>
[ Upstream commit 9bb086e5ba9495ac150fbbcc5c8c2bccc06261dd ]
In gb_lights_light_config(), 'light->name' is allocated by kstrndup(). It returns NULL when fails, add check for it.
--- drivers/staging/greybus/light.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/greybus/light.c +2 -1
@@ -1026,7 +1026,8 @@ static int gb_lights_light_config(struct gb_lights *glights, u8 id) light->channels_count = conf.channel_count; light->name =kstrndup (conf.name,NAMES_MAX ,GFP_KERNEL ); - +if (!light->name) +return -ENOMEM ; light->channels =kcalloc (light->channels_count,sizeof (struct gb_channel ),GFP_KERNEL );if (!light->channels)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 85/314 staging: rtl8712: fix multiline derefernce warnings
In reply to Greg Kroah-HartmanFrom: Aiman Najjar <[email protected]>
[ Upstream commit 269da10b1477c31c660288633c8d613e421b131f ]
This patch fixes remaining checkpatch warnings
in rtl871x_xmit.c:
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->PrivacyKeyIndex' 636: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:636:
+ (u8)psecuritypriv->
+ PrivacyKeyIndex);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid' 643: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:643:
+ (u8)psecuritypriv->
+ XGrpKeyid);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid' 652: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:652:
+ (u8)psecuritypriv->
+ XGrpKeyid);
--- drivers/staging/rtl8712/rtl871x_xmit.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/staging/rtl8712/rtl871x_xmit.c +4 -7
@@ -590,7 +590,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,addr_t addr;u8 *pframe, *mem_start, *ptxdesc;struct sta_info *psta; -struct security_priv *psecuritypriv = &padapter->securitypriv; +struct security_priv *psecpriv = &padapter->securitypriv;struct mlme_priv *pmlmepriv = &padapter->mlmepriv;struct xmit_priv *pxmitpriv = &padapter->xmitpriv;struct pkt_attrib *pattrib = &pxmitframe->attrib;
@@ -633,15 +633,13 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,case _WEP40_:case _WEP104_:WEP_IV (pattrib->iv, psta->txpn, - (u8 )psecuritypriv-> - PrivacyKeyIndex); + (u8 )psecpriv->PrivacyKeyIndex);break ;case _TKIP_:if (bmcst)TKIP_IV (pattrib->iv, psta->txpn, - (u8 )psecuritypriv-> - XGrpKeyid); + (u8 )psecpriv->XGrpKeyid);else TKIP_IV (pattrib->iv, psta->txpn,0 );
@@ -649,8 +647,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt,case _AES_:if (bmcst)AES_IV (pattrib->iv, psta->txpn, - (u8 )psecuritypriv-> - XGrpKeyid); + (u8 )psecpriv->XGrpKeyid);else AES_IV (pattrib->iv, psta->txpn,0 );
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 86/314 arm64: dts: mt8173: fix unit name warnings
In reply to Greg Kroah-HartmanFrom: Hsin-Yi Wang <[email protected]>
[ Upstream commit 72b29215aced394d01ca25e432963b619daa0098 ]
Fixing several unit name warnings:
Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000" Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"
--- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
arch/arm64/boot/dts/mediatek/mt8173.dtsi +11 -11
@@ -238,21 +238,21 @@ cpu_on = <0x84000003>; }; - clk26m: oscillator@0 { + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; }; - clk32k: oscillator@1 { + clk32k: oscillator1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32000>; clock-output-names = "clk32k"; }; - cpum_ck: oscillator@2 { + cpum_ck: oscillator2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>;
@@ -268,19 +268,19 @@ sustainable-power = <1500>; /* milliwatts */ trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <68000>; hysteresis = <2000>; type = "passive"; }; - target: trip-point@1 { + target: trip-point1 { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit@0 { + cpu_crit: cpu_crit0 { temperature = <115000>; hysteresis = <2000>; type = "critical";
@@ -288,13 +288,13 @@ }; cooling-maps { - map@0 { + map0 { trip = <&target>; cooling-device = <&cpu0 0 0>, <&cpu1 0 0>; contribution = <3072>; }; - map@1 { + map1 { trip = <&target>; cooling-device = <&cpu2 0 0>, <&cpu3 0 0>;
@@ -308,7 +308,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; - vpu_dma_reserved: vpu_dma_mem_region { + vpu_dma_reserved: vpu_dma_mem_region@b7000000 { compatible = "shared-dma-pool"; reg = <0 0xb7000000 0 0x500000>; alignment = <0x1000>;
@@ -360,7 +360,7 @@ reg = <0 0x10005000 0 0x1000>; }; - pio: pinctrl@10005000 { + pio: pinctrl@1000b000 { compatible = "mediatek,mt8173-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -567,7 +567,7 @@ status = "disabled"; }; - gic: interrupt-controller@10220000 { + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; interrupt-parent = <&gic>;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 87/314 scsi: qedi: Do not flush offload work if ARP not resolved
In reply to Greg Kroah-HartmanFrom: Nilesh Javali <[email protected]>
[ Upstream commit 927527aea0e2a9c1d336c7d33f77f1911481d008 ]
For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero.
------------[ cut here ]------------
WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0
:
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020
RIP: 0010:__flush_work+0x1c1/0x1d0
Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff
ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f
00 31 f6
RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282
RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898
RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001
R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000
R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00
FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? class_create_release+0x40/0x40
? klist_put+0x2c/0x80
qedi_ep_disconnect+0xdd/0x400 [qedi]
iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi]
iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi]
? __netlink_lookup+0xe7/0x160
netlink_unicast+0x21d/0x300
netlink_sendmsg+0x30f/0x430
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1e2/0x240
? copy_msghdr_from_user+0xd9/0x160
___sys_sendmsg+0x88/0xd0
? ___sys_recvmsg+0xa2/0xe0
? hrtimer_try_to_cancel+0x25/0x100
? do_nanosleep+0x9c/0x170
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f65f6f16107
Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48
63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8
0 00 00 00 00 53 48 89 f3 48
RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107
RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003
RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0
R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000
---[ end trace 54f499c05d41f8bb ]---Only flush if the connection endpoint state if different from OFLDCONN_NONE.
[mkp: clarified commit desc]
--- drivers/scsi/qedi/qedi_iscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/qedi/qedi_iscsi.c +2 -1
@@ -997,7 +997,8 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)if (qedi_ep->state ==EP_STATE_OFLDCONN_START ) goto ep_exit_recover; -flush_work (&qedi_ep->offload_work); +if (qedi_ep->state !=EP_STATE_OFLDCONN_NONE ) +flush_work (&qedi_ep->offload_work);if (qedi_ep->conn) { qedi_conn = qedi_ep->conn;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 88/314 arm64: dts: qcom: msm8916: remove unit name for thermal trip points
In reply to Greg Kroah-HartmanFrom: Amit Kucheria <[email protected]>
[ Upstream commit fe2aff0c574d206f34f1864d5a0b093694c27142 ]
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
--- arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/qcom/msm8916.dtsi +4 -4
@@ -212,7 +212,7 @@ thermal-sensors = <&tsens 3>; trips { - cpu2_3_alert0: trip-point@0 { + cpu2_3_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive";
@@ -242,7 +242,7 @@ thermal-sensors = <&tsens 2>; trips { - gpu_alert0: trip-point@0 { + gpu_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive";
@@ -262,7 +262,7 @@ thermal-sensors = <&tsens 1>; trips { - cam_alert0: trip-point@0 { + cam_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "hot";
@@ -277,7 +277,7 @@ thermal-sensors = <&tsens 0>; trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <85000>; hysteresis = <2000>; type = "hot";
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 89/314 ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
In reply to Greg Kroah-HartmanFrom: Vincent Stehlé <[email protected]>
[ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ]
The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low. This has been verified on a board and in the schematics [1].
[1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents
--- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +1 -1
@@ -31,7 +31,7 @@ pwr_led { label = "bananapi-m2-zero:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ default-state = "on"; }; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 90/314 RDMA/mlx5: Fix udata response upon SRQ creation
In reply to Greg Kroah-HartmanFrom: Yishai Hadas <[email protected]>
[ Upstream commit cf26deff9036cd3270af562dbec545239e5c7f07 ]
Fix udata response upon SRQ creation to use the UAPI structure (i.e. mlx5_ib_create_srq_resp). It did not zero the reserved field in userspace.
--- drivers/infiniband/hw/mlx5/srq.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/srq.c +8 -2
@@ -310,12 +310,18 @@ int mlx5_ib_create_srq(struct ib_srq *ib_srq, srq->msrq.event = mlx5_ib_srq_event; srq->ibsrq.ext.xrc.srq_num = srq->msrq.srqn; -if (udata) -if (ib_copy_to_udata (udata, &srq->msrq.srqn,sizeof (__u32))) { +if (udata) { +struct mlx5_ib_create_srq_resp resp = { + .srqn = srq->msrq.srqn, + }; + +if (ib_copy_to_udata (udata, &resp,min (udata->outlen, +sizeof (resp)))) {mlx5_ib_dbg (dev,"copy to user failed\n" ); err = -EFAULT ; goto err_core; } + } init_attr->attr.max_wr = srq->msrq.max -1 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 91/314 gpio: dwapb: Append MODULE_ALIAS for platform driver
In reply to Greg Kroah-HartmanFrom: Andy Shevchenko <[email protected]>
[ Upstream commit c58220cba2e03618659fa7d5dfae31f5ad4ae9d0 ]
The commit 3d2613c4289f
("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver")
introduced a use of the platform driver but missed to add the following line to it:
MODULE_ALIAS("platform:gpio-dwapb");
Add this to get driver loaded automatically if platform device is registered.
--- drivers/gpio/gpio-dwapb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpio/gpio-dwapb.c +6 -3
@@ -49,7 +49,9 @@#define GPIO_EXT_PORTC 0x58#define GPIO_EXT_PORTD 0x5c +#define DWAPB_DRIVER_NAME "gpio-dwapb"#define DWAPB_MAX_PORTS 4 +#define GPIO_EXT_PORT_STRIDE 0x04/* register stride 32 bits */ #define GPIO_SWPORT_DR_STRIDE 0x0c/* register stride 3*32 bits */ #define GPIO_SWPORT_DDR_STRIDE 0x0c/* register stride 3*32 bits */
@@ -398,7 +400,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,return ; err =irq_alloc_domain_generic_chips (gpio->domain, ngpio,2 , -"gpio-dwapb" , handle_level_irq, +DWAPB_DRIVER_NAME , handle_level_irq,IRQ_NOREQUEST ,0 ,IRQ_GC_INIT_NESTED_LOCK );if (err) {
@@ -455,7 +457,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,*/ err =devm_request_irq (gpio->dev, pp->irq[0 ], dwapb_irq_handler_mfd, -IRQF_SHARED ,"gpio-dwapb-mfd" , gpio); +IRQF_SHARED ,DWAPB_DRIVER_NAME , gpio);if (err) {dev_err (gpio->dev,"error requesting IRQ\n" );irq_domain_remove (gpio->domain);
@@ -843,7 +845,7 @@ static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,static struct platform_driver dwapb_gpio_driver = { .driver = { - .name ="gpio-dwapb" , + .name =DWAPB_DRIVER_NAME , .pm = &dwapb_gpio_pm_ops, .of_match_table =of_match_ptr (dwapb_of_match), .acpi_match_table =ACPI_PTR (dwapb_acpi_match),
@@ -857,3 +859,4 @@ module_platform_driver(dwapb_gpio_driver);MODULE_LICENSE ("GPL" );MODULE_AUTHOR ("Jamie Iles" );MODULE_DESCRIPTION ("Synopsys DesignWare APB GPIO driver" ); +MODULE_ALIAS ("platform:" DWAPB_DRIVER_NAME );
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 92/314 scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing
In reply to Greg Kroah-HartmanFrom: Chad Dupuis <[email protected]>
[ Upstream commit ad40f5256095c68dc17c991eb976261d5ea2daaa ]
The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault.
To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched.
--- drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 35 +++++++++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-)
drivers/scsi/qedf/qedf.h +1 -0
@@ -355,6 +355,7 @@ struct qedf_ctx {#define QEDF_GRCDUMP_CAPTURE 4#define QEDF_IN_RECOVERY 5#define QEDF_DBG_STOP_IO 6 +#define QEDF_PROBING 8unsigned long flags;/* Miscellaneous state flags */ int fipvlan_retries;u8 num_queues;
drivers/scsi/qedf/qedf_main.c +31 -4
@@ -3153,7 +3153,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) {int rc = -EINVAL ;struct fc_lport *lport; -struct qedf_ctx *qedf; +struct qedf_ctx *qedf =NULL ;struct Scsi_Host *host;bool is_vf = false;struct qed_ll2_params params;
@@ -3183,6 +3183,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)/* Initialize qedf_ctx */ qedf =lport_priv (lport); +set_bit (QEDF_PROBING , &qedf->flags); qedf->lport = lport; qedf->ctlr.lp = lport; qedf->pdev = pdev;
@@ -3206,9 +3207,12 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) }else {/* Init pointers during recovery */ qedf =pci_get_drvdata (pdev); +set_bit (QEDF_PROBING , &qedf->flags); lport = qedf->lport; } +QEDF_INFO (&qedf->dbg_ctx,QEDF_LOG_DISC ,"Probe started.\n" ); + host = lport->host;/* Allocate mempool for qedf_io_work structs */
@@ -3513,6 +3517,10 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)else fc_fabric_login (lport); +QEDF_INFO (&qedf->dbg_ctx,QEDF_LOG_DISC ,"Probe done.\n" ); + +clear_bit (QEDF_PROBING , &qedf->flags); +/* All good */ return 0 ;
@@ -3538,6 +3546,11 @@ err2: err1:scsi_host_put (lport->host); err0: +if (qedf) { +QEDF_INFO (&qedf->dbg_ctx,QEDF_LOG_DISC ,"Probe done.\n" ); + +clear_bit (QEDF_PROBING , &qedf->flags); + }return rc; }
@@ -3687,11 +3700,25 @@ void qedf_get_protocol_tlv_data(void *dev, void *data) {struct qedf_ctx *qedf = dev;struct qed_mfw_tlv_fcoe *fcoe = data; -struct fc_lport *lport = qedf->lport; -struct Scsi_Host *host = lport->host; -struct fc_host_attrs *fc_host =shost_to_fc_host (host); +struct fc_lport *lport; +struct Scsi_Host *host; +struct fc_host_attrs *fc_host;struct fc_host_statistics *hst; +if (!qedf) { +QEDF_ERR (NULL ,"qedf is null.\n" ); +return ; + } + +if (test_bit (QEDF_PROBING , &qedf->flags)) { +QEDF_ERR (&qedf->dbg_ctx,"Function is still probing.\n" ); +return ; + } + + lport = qedf->lport; + host = lport->host; + fc_host =shost_to_fc_host (host); +/* Force a refresh of the fc_host stats including offload stats */ hst =qedf_fc_get_host_stats (host);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 93/314 pinctrl: rza1: Fix wrong array assignment of rza1l_swio_entries
In reply to Greg Kroah-HartmanFrom: Jason Yan <[email protected]>
[ Upstream commit 4b4e8e93eccc2abc4209fe226ec89e7fbe9f3c61 ]
The rza1l_swio_entries referred to the wrong array rza1h_swio_pins, which was intended to be rza1l_swio_pins. So let's fix it.
This is detected by the following gcc warning:
drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’ defined but not used [-Wunused-const-variable=]
static const struct rza1_swio_pin rza1l_swio_pins[] = {
^~~~~~~~~~~~~~~--- drivers/pinctrl/pinctrl-rza1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/pinctrl-rza1.c +1 -1
@@ -418,7 +418,7 @@ static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = { };static const struct rza1_swio_entry rza1l_swio_entries[] = { - [0 ] = {ARRAY_SIZE (rza1h_swio_pins), rza1h_swio_pins }, + [0 ] = {ARRAY_SIZE (rza1l_swio_pins), rza1l_swio_pins }, };/* RZ/A1L (r7s72102x) pinmux flags table */
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 94/314 virtiofs: schedule blocking async replies in separate worker
In reply to Greg Kroah-HartmanFrom: Vivek Goyal <[email protected]>
[ Upstream commit bb737bbe48bea9854455cb61ea1dc06e92ce586c ]
In virtiofs (unlike in regular fuse) processing of async replies is serialized. This can result in a deadlock in rare corner cases when there's a circular dependency between the completion of two or more async replies.
Such a deadlock can be reproduced with xfstests:generic/503 if TEST_DIR == SCRATCH_MNT (which is a misconfiguration):
- Process A is waiting for page lock in worker thread context and blocked (virtio_fs_requests_done_work()).
- Process B is holding page lock and waiting for pending writes to finish (fuse_wait_on_page_writeback()).
- Write requests are waiting in virtqueue and can't complete because worker thread is blocked on page lock (process A).
Fix this by creating a unique work_struct for each async reply that can block (O_DIRECT read).
--- fs/fuse/file.c | 1 + fs/fuse/fuse_i.h | 1 + fs/fuse/virtio_fs.c | 106 +++++++++++++++++++++++++++++--------------- 3 files changed, 73 insertions(+), 35 deletions(-)
fs/fuse/file.c +1 -0
@@ -712,6 +712,7 @@ static ssize_t fuse_async_req_send(struct fuse_conn *fc,spin_unlock (&io->lock); ia->ap.args.end = fuse_aio_complete_req; + ia->ap.args.may_block = io->should_dirty; err =fuse_simple_background (fc, &ia->ap.args,GFP_KERNEL );if (err)fuse_aio_complete_req (fc, &ia->ap.args, err);
fs/fuse/fuse_i.h +1 -0
@@ -249,6 +249,7 @@ struct fuse_args { bool out_argvar:1; bool page_zeroing:1; bool page_replace:1; + bool may_block:1;struct fuse_in_arg in_args[3 ];struct fuse_arg out_args[2 ];void (*end)(struct fuse_conn *fc,struct fuse_args *args,int error);
fs/fuse/virtio_fs.c +71 -35
134 lines not on this page · raw message
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 95/314 arm64: dts: qcom: fix pm8150 gpio interrupts
In reply to Greg Kroah-HartmanFrom: Jonathan Marek <[email protected]>
[ Upstream commit 61d2ca503d0b55d2849fd656ce51d8e1e9ba0b6c ]
This was mistakenly copied from the downstream dts, however the upstream driver works differently.
I only tested this with the pm8150_gpios node (used with volume button), but the 2 others should be the same.
--- arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 ++------------ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------ arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------ 3 files changed, 6 insertions(+), 36 deletions(-)
arch/arm64/boot/dts/qcom/pm8150.dtsi +2 -12
@@ -73,18 +73,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>, - <0x0 0xc1 0x0 IRQ_TYPE_NONE>, - <0x0 0xc2 0x0 IRQ_TYPE_NONE>, - <0x0 0xc3 0x0 IRQ_TYPE_NONE>, - <0x0 0xc4 0x0 IRQ_TYPE_NONE>, - <0x0 0xc5 0x0 IRQ_TYPE_NONE>, - <0x0 0xc6 0x0 IRQ_TYPE_NONE>, - <0x0 0xc7 0x0 IRQ_TYPE_NONE>, - <0x0 0xc8 0x0 IRQ_TYPE_NONE>, - <0x0 0xc9 0x0 IRQ_TYPE_NONE>, - <0x0 0xca 0x0 IRQ_TYPE_NONE>, - <0x0 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
arch/arm64/boot/dts/qcom/pm8150b.dtsi +2 -12
@@ -62,18 +62,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, - <0x2 0xc1 0x0 IRQ_TYPE_NONE>, - <0x2 0xc2 0x0 IRQ_TYPE_NONE>, - <0x2 0xc3 0x0 IRQ_TYPE_NONE>, - <0x2 0xc4 0x0 IRQ_TYPE_NONE>, - <0x2 0xc5 0x0 IRQ_TYPE_NONE>, - <0x2 0xc6 0x0 IRQ_TYPE_NONE>, - <0x2 0xc7 0x0 IRQ_TYPE_NONE>, - <0x2 0xc8 0x0 IRQ_TYPE_NONE>, - <0x2 0xc9 0x0 IRQ_TYPE_NONE>, - <0x2 0xca 0x0 IRQ_TYPE_NONE>, - <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
arch/arm64/boot/dts/qcom/pm8150l.dtsi +2 -12
@@ -56,18 +56,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, - <0x4 0xc1 0x0 IRQ_TYPE_NONE>, - <0x4 0xc2 0x0 IRQ_TYPE_NONE>, - <0x4 0xc3 0x0 IRQ_TYPE_NONE>, - <0x4 0xc4 0x0 IRQ_TYPE_NONE>, - <0x4 0xc5 0x0 IRQ_TYPE_NONE>, - <0x4 0xc6 0x0 IRQ_TYPE_NONE>, - <0x4 0xc7 0x0 IRQ_TYPE_NONE>, - <0x4 0xc8 0x0 IRQ_TYPE_NONE>, - <0x4 0xc9 0x0 IRQ_TYPE_NONE>, - <0x4 0xca 0x0 IRQ_TYPE_NONE>, - <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 96/314 firmware: qcom_scm: fix bogous abuse of dma-direct internals
In reply to Greg Kroah-HartmanFrom: Christoph Hellwig <[email protected]>
[ Upstream commit 459b1f86f1cba7de813fbc335df476c111feec22 ]
As far as the device is concerned the dma address is the physical address. There is no need to convert it to a physical address, especially not using dma-direct internals that are not available to drivers and which will interact badly with IOMMUs. Last but not least the commit introducing it claimed to just fix a type issue, but actually changed behavior.
--- drivers/firmware/qcom_scm.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/firmware/qcom_scm.c +3 -6
@@ -9,7 +9,6 @@#include <linux/init.h> #include <linux/cpumask.h> #include <linux/export.h> -#include <linux/dma-direct.h> #include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/types.h>
@@ -441,8 +440,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,struct qcom_scm_mem_map_info *mem_to_map;phys_addr_t mem_to_map_phys;phys_addr_t dest_phys; -phys_addr_t ptr_phys; -dma_addr_t ptr_dma; +dma_addr_t ptr_phys;size_t mem_to_map_sz;size_t dest_sz;size_t src_sz;
@@ -459,10 +457,9 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, ptr_sz =ALIGN (src_sz,SZ_64 ) +ALIGN (mem_to_map_sz,SZ_64 ) +ALIGN (dest_sz,SZ_64 ); - ptr =dma_alloc_coherent (__scm->dev, ptr_sz, &ptr_dma,GFP_KERNEL ); + ptr =dma_alloc_coherent (__scm->dev, ptr_sz, &ptr_phys,GFP_KERNEL );if (!ptr)return -ENOMEM ; - ptr_phys =dma_to_phys (__scm->dev, ptr_dma);/* Fill source vmid detail */ src = ptr;
@@ -490,7 +487,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, ret =__qcom_scm_assign_mem (__scm->dev, mem_to_map_phys, mem_to_map_sz, ptr_phys, src_sz, dest_phys, dest_sz); -dma_free_coherent (__scm->dev, ptr_sz, ptr, ptr_dma); +dma_free_coherent (__scm->dev, ptr_sz, ptr, ptr_phys);if (ret) {dev_err (__scm->dev,"Assign memory protection call failed %d\n" , ret);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 97/314 staging: gasket: Fix mapping refcnt leak when put attribute fails
In reply to Greg Kroah-HartmanFrom: Xiyu Yang <[email protected]>
[ Upstream commit 57a66838e1494cd881b7f4e110ec685736e8e3ca ]
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt.
When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak.
Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute.
--- drivers/staging/gasket/gasket_sysfs.c | 1 + 1 file changed, 1 insertion(+)
drivers/staging/gasket/gasket_sysfs.c +1 -0
@@ -339,6 +339,7 @@ void gasket_sysfs_put_attr(struct device *device,dev_err (device,"Unable to put unknown attribute: %s\n" , attr->attr.attr.name); +put_mapping (mapping); }EXPORT_SYMBOL (gasket_sysfs_put_attr);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 98/314 staging: gasket: Fix mapping refcnt leak when register/store fails
In reply to Greg Kroah-HartmanFrom: Xiyu Yang <[email protected]>
[ Upstream commit e3436ce60cf5f5eaedda2b8c622f69feb97595e2 ]
gasket_sysfs_register_store() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt.
When gasket_sysfs_register_store() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of gasket_sysfs_register_store(). When gasket_dev is NULL, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak.
Fix this issue by calling put_mapping() when gasket_dev is NULL.
--- drivers/staging/gasket/gasket_sysfs.c | 1 + 1 file changed, 1 insertion(+)
drivers/staging/gasket/gasket_sysfs.c +1 -0
@@ -373,6 +373,7 @@ ssize_t gasket_sysfs_register_store(struct device *device, gasket_dev = mapping->gasket_dev;if (!gasket_dev) {dev_err (device,"Device driver may have been removed\n" ); +put_mapping (mapping);return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 99/314 ALSA: usb-audio: Improve frames size computation
In reply to Greg Kroah-HartmanFrom: Alexander Tsoy <[email protected]>
[ Upstream commit f0bd62b64016508938df9babe47f65c2c727d25c ]
For computation of the the next frame size current value of fs/fps and accumulated fractional parts of fs/fps are used, where values are stored in Q16.16 format. This is quite natural for computing frame size for asynchronous endpoints driven by explicit feedback, since in this case fs/fps is a value provided by the feedback endpoint and it's already in the Q format. If an error is accumulated over time, the device can adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations is not enough. Due to accumulated error the driver periodically produces frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for frame size computation. It is based on accumulating of the remainders from division fs/fps and it doesn't accumulate errors over time. This new method is enabled for synchronous and adaptive playback endpoints.
--- sound/usb/card.h | 4 ++++ sound/usb/endpoint.c | 43 ++++++++++++++++++++++++++++++++++++++----- sound/usb/endpoint.h | 1 + sound/usb/pcm.c | 2 ++ 4 files changed, 45 insertions(+), 5 deletions(-)
sound/usb/card.h +4 -0
@@ -84,6 +84,10 @@ struct snd_usb_endpoint {dma_addr_t sync_dma;/* DMA address of syncbuf */ unsigned int pipe;/* the data i/o pipe */ +unsigned int framesize[2 ];/* small/large frame sizes in samples */ +unsigned int sample_rem;/* remainder from division fs/fps */ +unsigned int sample_accum;/* sample accumulator */ +unsigned int fps;/* frames per second */ unsigned int freqn;/* nominal sampling rate in fs/fps in Q16.16 format */ unsigned int freqm;/* momentary sampling rate in fs/fps in Q16.16 format */ int freqshift;/* how much to shift the feedback value to get Q16.16 */
sound/usb/endpoint.c +38 -5
78 lines not on this page · raw message
sound/usb/endpoint.h +1 -0
@@ -28,6 +28,7 @@ void snd_usb_endpoint_release(struct snd_usb_endpoint *ep);void snd_usb_endpoint_free (struct snd_usb_endpoint *ep);int snd_usb_endpoint_implicit_feedback_sink (struct snd_usb_endpoint *ep); +int snd_usb_endpoint_slave_next_packet_size (struct snd_usb_endpoint *ep);int snd_usb_endpoint_next_packet_size (struct snd_usb_endpoint *ep); void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
sound/usb/pcm.c +2 -0
@@ -1575,6 +1575,8 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,for (i =0 ; i < ctx->packets; i++) {if (ctx->packet_size[i]) counts = ctx->packet_size[i]; +else if (ep->sync_master) + counts =snd_usb_endpoint_slave_next_packet_size (ep);else counts =snd_usb_endpoint_next_packet_size (ep);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 100/314 ALSA: usb-audio: Fix racy list management in output queue
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
[ Upstream commit 5b6cc38f3f3f37109ce72b60bda215a5f6892c0b ]
The linked list entry from FIFO is peeked at queue_pending_output_urbs() but the actual element pop-out is performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
--- sound/usb/endpoint.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
sound/usb/endpoint.c +3 -3
@@ -346,17 +346,17 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep) ep->next_packet_read_pos %=MAX_URBS ;/* take URB out of FIFO */ -if (!list_empty (&ep->ready_playback_urbs)) +if (!list_empty (&ep->ready_playback_urbs)) { ctx =list_first_entry (&ep->ready_playback_urbs, struct snd_urb_ctx, ready_list); +list_del_init (&ctx->ready_list); + } }spin_unlock_irqrestore (&ep->lock, flags);if (ctx ==NULL )return ; -list_del_init (&ctx->ready_list); -/* copy over the length information */ for (i =0 ; i < packet->packets; i++) ctx->packet_size[i] = packet->packet_size[i];
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 101/314 Input: mms114 - add extra compatible for mms345l
In reply to Greg Kroah-HartmanFrom: Stephan Gerhold <[email protected]>
[ Upstream commit 7842087b0196d674ed877d768de8f2a34d7fdc53 ]
MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152.
However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization.
TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06
On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now.
But we probably shouldn't print something from a random register.
Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future.
--- drivers/input/touchscreen/mms114.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/input/touchscreen/mms114.c +15 -2
@@ -54,6 +54,7 @@enum mms_type {TYPE_MMS114 =114 ,TYPE_MMS152 =152 , +TYPE_MMS345L =345 , };struct mms114_data {
@@ -250,6 +251,15 @@ static int mms114_get_version(struct mms114_data *data)int error;switch (data->type) { +case TYPE_MMS345L : + error =__mms114_read_reg (data,MMS152_FW_REV ,3 , buf); +if (error) +return error; + +dev_info (dev,"TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n" , + buf[0 ], buf[1 ], buf[2 ]); +break ; +case TYPE_MMS152 : error =__mms114_read_reg (data,MMS152_FW_REV ,3 , buf);if (error)
@@ -287,8 +297,8 @@ static int mms114_setup_regs(struct mms114_data *data)if (error <0 )return error; -/* MMS152 has no configuration or power on registers */ -if (data->type ==TYPE_MMS152 ) +/* Only MMS114 has configuration and power on registers */ +if (data->type !=TYPE_MMS114 )return 0 ; error =mms114_set_active (data, true);
@@ -598,6 +608,9 @@ static const struct of_device_id mms114_dt_match[] = { }, { .compatible = "melfas,mms152", .data = (void *)TYPE_MMS152, + }, { + .compatible = "melfas,mms345l", + .data = (void *)TYPE_MMS345L, }, { } };
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 102/314 s390/qdio: put thinint indicator after early error
In reply to Greg Kroah-HartmanFrom: Julian Wiedmann <[email protected]>
[ Upstream commit 75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ]
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally.
--- drivers/s390/cio/qdio.h | 1 - drivers/s390/cio/qdio_setup.c | 1 - drivers/s390/cio/qdio_thinint.c | 14 ++++++++------ 3 files changed, 8 insertions(+), 8 deletions(-)
drivers/s390/cio/qdio.h +0 -1
@@ -372,7 +372,6 @@ static inline int multicast_outbound(struct qdio_q *q)extern u64 last_ai_time;/* prototypes for thin interrupt */ -void qdio_setup_thinint (struct qdio_irq *irq_ptr);int qdio_establish_thinint (struct qdio_irq *irq_ptr);void qdio_shutdown_thinint (struct qdio_irq *irq_ptr);void tiqdio_add_input_queues (struct qdio_irq *irq_ptr);
drivers/s390/cio/qdio_setup.c +0 -1
@@ -479,7 +479,6 @@ int qdio_setup_irq(struct qdio_initialize *init_data)setup_queues (irq_ptr, init_data);setup_qib (irq_ptr, init_data); -qdio_setup_thinint (irq_ptr); set_impl_params(irq_ptr, init_data->qib_param_field_format, init_data->qib_param_field, init_data->input_slib_elements,
drivers/s390/cio/qdio_thinint.c +8 -6
@@ -268,17 +268,19 @@ int __init tiqdio_register_thinints(void)int qdio_establish_thinint (struct qdio_irq *irq_ptr) { +int rc; +if (!is_thinint_irq (irq_ptr))return 0 ; -return set_subchannel_ind (irq_ptr,0 ); -} -void qdio_setup_thinint (struct qdio_irq *irq_ptr) -{ -if (!is_thinint_irq (irq_ptr)) -return ; irq_ptr->dsci =get_indicator ();DBF_HEX (&irq_ptr->dsci,sizeof (void *)); + + rc =set_subchannel_ind (irq_ptr,0 ); +if (rc) +put_indicator (irq_ptr->dsci); + +return rc; }void qdio_shutdown_thinint (struct qdio_irq *irq_ptr)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 103/314 tty: hvc: Fix data abort due to race in hvc_open
In reply to Greg Kroah-HartmanFrom: Raghavendra Rao Ananta <[email protected]>
[ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ]
Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead.
The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &
--- drivers/tty/hvc/hvc_console.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/tty/hvc/hvc_console.c +14 -2
@@ -75,6 +75,8 @@ static LIST_HEAD(hvc_structs);*/ static DEFINE_MUTEX (hvc_structs_mutex); +/* Mutex to serialize hvc_open */ +static DEFINE_MUTEX (hvc_open_mutex);/* * This value is used to assign a tty->index value to a hvc_struct based * upon order of exposure via hvc_probe(), when we can not match it to
@@ -346,16 +348,24 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)*/ static int hvc_open (struct tty_struct *tty,struct file * filp) { -struct hvc_struct *hp = tty->driver_data; +struct hvc_struct *hp;unsigned long flags;int rc =0 ; +mutex_lock (&hvc_open_mutex); + + hp = tty->driver_data; +if (!hp) { + rc = -EIO ; + goto out; + } +spin_lock_irqsave (&hp->port.lock, flags);/* Check and then increment for fast path open. */ if (hp->port.count++ >0 ) {spin_unlock_irqrestore (&hp->port.lock, flags);hvc_kick (); -return 0 ; + goto out; }/* else count == 0 */ spin_unlock_irqrestore (&hp->port.lock, flags);
@@ -383,6 +393,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)/* Force wakeup of the polling thread */ hvc_kick (); +out: +mutex_unlock (&hvc_open_mutex);return rc; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 104/314 slimbus: ngd: get drvdata from correct device
In reply to Greg Kroah-HartmanFrom: Srinivas Kandagatla <[email protected]>
[ Upstream commit b58c663059b484f7ff547d076a34cf6d7a302e56 ]
Get drvdata directly from parent instead of ngd dev, as ngd dev can probe defer and previously set drvdata will become null.
--- drivers/slimbus/qcom-ngd-ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/slimbus/qcom-ngd-ctrl.c +2 -2
@@ -1354,7 +1354,6 @@ static int of_qcom_slim_ngd_register(struct device *parent, ngd->pdev->driver_override =QCOM_SLIM_NGD_DRV_NAME ; ngd->pdev->dev.of_node = node; ctrl->ngd = ngd; -platform_set_drvdata (ngd->pdev, ctrl);platform_device_add (ngd->pdev); ngd->base = ctrl->base + ngd->id * data->offset +
@@ -1369,12 +1368,13 @@ static int of_qcom_slim_ngd_register(struct device *parent,static int qcom_slim_ngd_probe (struct platform_device *pdev) { -struct qcom_slim_ngd_ctrl *ctrl =platform_get_drvdata (pdev);struct device *dev = &pdev->dev; +struct qcom_slim_ngd_ctrl *ctrl =dev_get_drvdata (dev->parent);int ret; ctrl->ctrl.dev = dev; +platform_set_drvdata (pdev, ctrl);pm_runtime_use_autosuspend (dev);pm_runtime_set_autosuspend_delay (dev,QCOM_SLIM_NGD_AUTOSUSPEND );pm_runtime_set_suspended (dev);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 105/314 clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
In reply to Greg Kroah-HartmanFrom: Martin Blumenstingl <[email protected]>
[ Upstream commit da1978ac3d6cf278dedf5edbf350445a0fff2f08 ]
Use hdmi_pll_lvds_out as parent of the vid_pll_in_sel clock. It's not easy to see that the vendor kernel does the same, but it actually does. meson_clk_pll_ops in mainline still cannot fully recalculate all rates from the HDMI PLL registers because some register bits (at the time of writing it's unknown which bits are used for this) double the HDMI PLL output rate (compared to simply considering M, N and FRAC) for some (but not all) PLL settings.
Update the vid_pll_in_sel parent so our clock calculation works for simple clock settings like the CVBS output (where no rate doubling is going on). The PLL ops need to be fixed later on for more complex clock settings (all HDMI rates).
--- drivers/clk/meson/meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/meson/meson8b.c +1 -1
@@ -1071,7 +1071,7 @@ static struct clk_regmap meson8b_vid_pll_in_sel = {* Meson8m2: vid2_pll */ .parent_hws = (const struct clk_hw *[]) { - &meson8b_hdmi_pll_dco.hw + &meson8b_hdmi_pll_lvds_out.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 106/314 clk: meson: meson8b: Fix the polarity of the RESET_N lines
In reply to Greg Kroah-HartmanFrom: Martin Blumenstingl <[email protected]>
[ Upstream commit 0d3051c790ed2ef6bd91b92b07220313f06b95b3 ]
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST and CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE are active low. This means:
- asserting them requires setting the register value to 0
- de-asserting them requires setting the register value to 1
Set the register value accordingly for these two reset lines by setting the inverted the register value compared to all other reset lines.
--- drivers/clk/meson/meson8b.c | 79 ++++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 23 deletions(-)
drivers/clk/meson/meson8b.c +56 -23
@@ -3491,54 +3491,87 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {static const struct meson8b_clk_reset_line {u32 reg;u8 bit_idx; +bool active_low; } meson8b_clk_reset_bits[] = { [CLKC_RESET_L2_CACHE_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =30 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =30 , + .active_low = false, }, [CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =29 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =29 , + .active_low = false, }, [CLKC_RESET_SCU_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =28 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =28 , + .active_low = false, }, [CLKC_RESET_CPU3_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =27 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =27 , + .active_low = false, }, [CLKC_RESET_CPU2_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =26 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =26 , + .active_low = false, }, [CLKC_RESET_CPU1_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =25 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =25 , + .active_low = false, }, [CLKC_RESET_CPU0_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =24 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =24 , + .active_low = false, }, [CLKC_RESET_A5_GLOBAL_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =18 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =18 , + .active_low = false, }, [CLKC_RESET_A5_AXI_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =17 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =17 , + .active_low = false, }, [CLKC_RESET_A5_ABP_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL0 , .bit_idx =16 + .reg =HHI_SYS_CPU_CLK_CNTL0 , + .bit_idx =16 , + .active_low = false, }, [CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET ] = { - .reg =HHI_SYS_CPU_CLK_CNTL1 , .bit_idx =30 + .reg =HHI_SYS_CPU_CLK_CNTL1 , + .bit_idx =30 , + .active_low = false, }, [CLKC_RESET_VID_CLK_CNTL_SOFT_RESET ] = { - .reg =HHI_VID_CLK_CNTL , .bit_idx =15 + .reg =HHI_VID_CLK_CNTL , + .bit_idx =15 , + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST ] = { - .reg =HHI_VID_DIVIDER_CNTL , .bit_idx =7 + .reg =HHI_VID_DIVIDER_CNTL , + .bit_idx =7 , + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE ] = { - .reg =HHI_VID_DIVIDER_CNTL , .bit_idx =3 + .reg =HHI_VID_DIVIDER_CNTL , + .bit_idx =3 , + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST ] = { - .reg =HHI_VID_DIVIDER_CNTL , .bit_idx =1 + .reg =HHI_VID_DIVIDER_CNTL , + .bit_idx =1 , + .active_low = true, }, [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE ] = { - .reg =HHI_VID_DIVIDER_CNTL , .bit_idx =0 + .reg =HHI_VID_DIVIDER_CNTL , + .bit_idx =0 , + .active_low = true, }, };
@@ -3547,22 +3580,22 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev, {struct meson8b_clk_reset *meson8b_clk_reset = container_of(rcdev, struct meson8b_clk_reset, reset); -unsigned long flags;const struct meson8b_clk_reset_line *reset; +unsigned int value =0 ; +unsigned long flags;if (id >=ARRAY_SIZE (meson8b_clk_reset_bits))return -EINVAL ; reset = &meson8b_clk_reset_bits[id]; +if (assert != reset->active_low) + value =BIT (reset->bit_idx); +spin_lock_irqsave (&meson_clk_lock, flags); -if (assert) -regmap_update_bits (meson8b_clk_reset->regmap, reset->reg, -BIT (reset->bit_idx),BIT (reset->bit_idx)); -else -regmap_update_bits (meson8b_clk_reset->regmap, reset->reg, -BIT (reset->bit_idx),0 ); +regmap_update_bits (meson8b_clk_reset->regmap, reset->reg, +BIT (reset->bit_idx), value);spin_unlock_irqrestore (&meson_clk_lock, flags);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 107/314 clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
In reply to Greg Kroah-HartmanFrom: Martin Blumenstingl <[email protected]>
[ Upstream commit 8bb629cfb28f4dad9d47f69249366e50ae5edc25 ]
The DIV{1,2,4,6,12}_EN bits are actually located in HHI_VID_CLK_CNTL register:
- HHI_VID_CLK_CNTL[0] = DIV1_EN
- HHI_VID_CLK_CNTL[1] = DIV2_EN
- HHI_VID_CLK_CNTL[2] = DIV4_EN
- HHI_VID_CLK_CNTL[3] = DIV6_EN
- HHI_VID_CLK_CNTL[4] = DIV12_EN
Update the bits accordingly so we will enable the bits in the correct register once we switch these clocks to be mutable.
--- drivers/clk/meson/meson8b.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clk/meson/meson8b.c +5 -5
@@ -1207,7 +1207,7 @@ static struct clk_regmap meson8b_vclk_in_en = {static struct clk_regmap meson8b_vclk_div1_gate = { .data = &(struct clk_regmap_gate_data ){ - .offset =HHI_VID_CLK_DIV , + .offset =HHI_VID_CLK_CNTL , .bit_idx =0 , }, .hw.init = &(struct clk_init_data ){
@@ -1237,7 +1237,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {static struct clk_regmap meson8b_vclk_div2_div_gate = { .data = &(struct clk_regmap_gate_data ){ - .offset =HHI_VID_CLK_DIV , + .offset =HHI_VID_CLK_CNTL , .bit_idx =1 , }, .hw.init = &(struct clk_init_data ){
@@ -1267,7 +1267,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {static struct clk_regmap meson8b_vclk_div4_div_gate = { .data = &(struct clk_regmap_gate_data ){ - .offset =HHI_VID_CLK_DIV , + .offset =HHI_VID_CLK_CNTL , .bit_idx =2 , }, .hw.init = &(struct clk_init_data ){
@@ -1297,7 +1297,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {static struct clk_regmap meson8b_vclk_div6_div_gate = { .data = &(struct clk_regmap_gate_data ){ - .offset =HHI_VID_CLK_DIV , + .offset =HHI_VID_CLK_CNTL , .bit_idx =3 , }, .hw.init = &(struct clk_init_data ){
@@ -1327,7 +1327,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {static struct clk_regmap meson8b_vclk_div12_div_gate = { .data = &(struct clk_regmap_gate_data ){ - .offset =HHI_VID_CLK_DIV , + .offset =HHI_VID_CLK_CNTL , .bit_idx =4 , }, .hw.init = &(struct clk_init_data ){
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 108/314 gpio: pca953x: fix handling of automatic address incrementing
In reply to Greg Kroah-HartmanFrom: Uwe Kleine-König <[email protected]>
[ Upstream commit bcf41dc480b179bfb669a232080a2e26dc7294b4 ]
Some of the chips supported by the pca953x driver need the most significant bit in the address word set to automatically increment the address pointer on subsequent reads and writes (example: PCA9505). With this bit unset the same register is read multiple times on a multi-byte read sequence. Other chips must not have this bit set and autoincrement always (example: PCA9555).
Up to now this AI bit was interpreted to be part of the address, which resulted in inconsistent regmap caching when a register was written with AI set and then read without it. This happened for the PCA9505 in pca953x_gpio_set_multiple() where pca953x_read_regs() bulk read from the cache for registers 0x8-0xc and then wrote to registers 0x88-0x8c. (Side
note: reading 5 values from offset 0x8 yiels OP0 5 times because AI must be set to get OP0-OP4, which is another bug that is resolved here as a by-product.) The same problem happens when calls to gpio_set_value() and gpio_set_array_value() were mixed.
With this patch the AI bit is always set for chips that support it. This works as there are no code locations that make use of the behaviour with AI unset (for the chips that support it).
Note that the call to pca953x_setup_gpio() had to be done a bit earlier to make the NBANK macro work.
The history of this bug is a bit complicated. Commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function") changed which chips and functions are affected. Commit 3b00691cc46a ("gpio: pca953x: hack to fix 24 bit gpio expanders") used some duct tape to make the driver at least appear to work. Commit 49427232764d ("gpio: pca953x: Perform basic regmap conversion") introduced the caching. Commit b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") introduced the .set_multiple() callback which didn't work for chips that need the AI bit which was fixed later for some chips in 8958262af3fb ("gpio:
pca953x: Repair multi-byte IO address increment on PCA9575"). So I'm sorry, I don't know which commit I should pick for a Fixes: line.
--- drivers/gpio/gpio-pca953x.c | 44 +++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 16 deletions(-)
drivers/gpio/gpio-pca953x.c +28 -16
@@ -306,8 +306,22 @@ static const struct regmap_config pca953x_i2c_regmap = { .volatile_reg = pca953x_volatile_register, .cache_type = REGCACHE_RBTREE, -/* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */ - .max_register = 0xff, + .max_register = 0x7f, +}; + +static const struct regmap_config pca953x_ai_i2c_regmap = { + .reg_bits =8 , + .val_bits =8 , + + .read_flag_mask =REG_ADDR_AI , + .write_flag_mask =REG_ADDR_AI , + + .readable_reg = pca953x_readable_register, + .writeable_reg = pca953x_writeable_register, + .volatile_reg = pca953x_volatile_register, + + .cache_type =REGCACHE_RBTREE , + .max_register =0x7f , }; static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
@@ -318,18 +332,6 @@ static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,int pinctrl = (reg &PCAL_PINCTRL_MASK ) <<1 ;u8 regaddr = pinctrl | addr | (off /BANK_SZ ); -/* Single byte read doesn't need AI bit set. */ -if (!addrinc) -return regaddr; - -/* Chips with 24 and more GPIOs always support Auto Increment */ -if (write &&NBANK (chip) >2 ) - regaddr |=REG_ADDR_AI ; - -/* PCA9575 needs address-increment on multi-byte writes */ -if (PCA_CHIP_TYPE (chip->driver_data) ==PCA957X_TYPE ) - regaddr |=REG_ADDR_AI ; -return regaddr; }
@@ -897,6 +899,7 @@ static int pca953x_probe(struct i2c_client *client,int ret;u32 invert =0 ;struct regulator *reg; +const struct regmap_config *regmap_config; chip =devm_kzalloc (&client->dev,sizeof (struct pca953x_chip ),GFP_KERNEL );
@@ -960,7 +963,17 @@ static int pca953x_probe(struct i2c_client *client,i2c_set_clientdata (client, chip); - chip->regmap =devm_regmap_init_i2c (client, &pca953x_i2c_regmap); +pca953x_setup_gpio (chip, chip->driver_data &PCA_GPIO_MASK ); + +if (NBANK (chip) >2 ||PCA_CHIP_TYPE (chip->driver_data) ==PCA957X_TYPE ) { +dev_info (&client->dev,"using AI\n" ); + regmap_config = &pca953x_ai_i2c_regmap; + }else { +dev_info (&client->dev,"using no AI\n" ); + regmap_config = &pca953x_i2c_regmap; + } + + chip->regmap =devm_regmap_init_i2c (client, regmap_config);if (IS_ERR (chip->regmap)) { ret =PTR_ERR (chip->regmap); goto err_exit;
@@ -991,7 +1004,6 @@ static int pca953x_probe(struct i2c_client *client,/* initialize cached registers from their original values. * we can't share this chip with another i2c master. */ -pca953x_setup_gpio (chip, chip->driver_data &PCA_GPIO_MASK );if (PCA_CHIP_TYPE (chip->driver_data) ==PCA953X_TYPE ) { chip->regs = &pca953x_regs;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 109/314 thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR
In reply to Greg Kroah-HartmanFrom: Sudip Mukherjee <[email protected]>
[ Upstream commit 7440f518dad9d861d76c64956641eeddd3586f75 ]
On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL.
--- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/thermal/ti-soc-thermal/ti-thermal-common.c +3 -3
@@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data =ti_bandgap_get_sensor_data (bgp, id); -if (!data ||IS_ERR (data)) +if (!IS_ERR_OR_NULL (data)) data =ti_thermal_build_data (bgp, id);if (!data)
@@ -196,7 +196,7 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) data =ti_bandgap_get_sensor_data (bgp, id); -if (data && data->ti_thermal) { +if (!IS_ERR_OR_NULL (data) && data->ti_thermal) {if (data->our_zone)thermal_zone_device_unregister (data->ti_thermal); }
@@ -262,7 +262,7 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) data =ti_bandgap_get_sensor_data (bgp, id); -if (data) { +if (!IS_ERR_OR_NULL (data)) {cpufreq_cooling_unregister (data->cool_dev);if (data->policy)cpufreq_cpu_put (data->policy);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 110/314 clk: meson: meson8b: Dont rely on u-boot to init all GP_PLL registers
In reply to Greg Kroah-HartmanFrom: Martin Blumenstingl <[email protected]>
[ Upstream commit a29ae8600d50ece1856b062a39ed296b8b952259 ]
Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers. In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL
In Linux we already initialize M, N, OD, the enable and the reset bits. Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the exact meaning is unknown) so the PLL can lock when the vendor u-boot did not initialize these registers yet.
--- drivers/clk/meson/meson8b.c | 9 +++++++++ drivers/clk/meson/meson8b.h | 4 ++++ 2 files changed, 13 insertions(+)
drivers/clk/meson/meson8b.c +9 -0
@@ -1910,6 +1910,13 @@ static struct clk_regmap meson8b_mali = { }, }; +static const struct reg_sequence meson8m2_gp_pll_init_regs[] = { + { .reg =HHI_GP_PLL_CNTL2 , .def =0x59c88000 }, + { .reg =HHI_GP_PLL_CNTL3 , .def =0xca463823 }, + { .reg =HHI_GP_PLL_CNTL4 , .def =0x0286a027 }, + { .reg =HHI_GP_PLL_CNTL5 , .def =0x00003000 }, +}; +static const struct pll_params_table meson8m2_gp_pll_params_table[] = {PLL_PARAMS (182 ,3 ), {/* sentinel */ },
@@ -1943,6 +1950,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = { .width = 1, }, .table = meson8m2_gp_pll_params_table, + .init_regs = meson8m2_gp_pll_init_regs, + .init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs), }, .hw.init = &(struct clk_init_data ){ .name ="gp_pll_dco" ,
drivers/clk/meson/meson8b.h +4 -0
@@ -20,6 +20,10 @@* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf */ #define HHI_GP_PLL_CNTL 0x40/* 0x10 offset in data sheet */ +#define HHI_GP_PLL_CNTL2 0x44/* 0x11 offset in data sheet */ +#define HHI_GP_PLL_CNTL3 0x48/* 0x12 offset in data sheet */ +#define HHI_GP_PLL_CNTL4 0x4C/* 0x13 offset in data sheet */ +#define HHI_GP_PLL_CNTL5 0x50/* 0x14 offset in data sheet */ #define HHI_VIID_CLK_DIV 0x128/* 0x4a offset in data sheet */ #define HHI_VIID_CLK_CNTL 0x12c/* 0x4b offset in data sheet */ #define HHI_GCLK_MPEG0 0x140/* 0x50 offset in data sheet */
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 111/314 ASoC: max98373: reorder max98373_reset() in resume
In reply to Greg Kroah-HartmanFrom: Yong Zhi <[email protected]>
[ Upstream commit 1a446873d7dd3a450f685928ce7f1907bde4583d ]
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs [ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11 [ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL, _regmap_read() is entered with the following logic:
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
if (ret == 0)
return 0;
}
if (map->cache_only)
return -EBUSY;regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile, as map->cache_only is set by codec suspend, thus -EBUSY is returned. Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
--- sound/soc/codecs/max98373.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/max98373.c +1 -1
@@ -850,8 +850,8 @@ static int max98373_resume(struct device *dev) {struct max98373_priv *max98373 =dev_get_drvdata (dev); -max98373_reset (max98373, dev);regcache_cache_only (max98373->regmap, false); +max98373_reset (max98373, dev);regcache_sync (max98373->regmap);return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 112/314 soundwire: slave: dont init debugfs on device registration error
In reply to Greg Kroah-HartmanFrom: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 8893ab5e8ee5d7c12e0fc1dca4a309475064473d ]
The error handling flow seems incorrect, there is no reason to try and add debugfs support if the device registration did not succeed. Return on error.
--- drivers/soundwire/slave.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/soundwire/slave.c +2 -0
@@ -57,6 +57,8 @@ static int sdw_slave_add(struct sdw_bus *bus,list_del (&slave->node);mutex_unlock (&bus->bus_lock);put_device (&slave->dev); + +return ret; }sdw_slave_debugfs_init (slave);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 113/314 HID: intel-ish-hid: avoid bogus uninitialized-variable warning
In reply to Greg Kroah-HartmanFrom: Arnd Bergmann <[email protected]>
[ Upstream commit 0b66fb3e6b7a53688f8e20945ac78cd3d832c65f ]
Older compilers like gcc-4.8 don't see that the variable is initialized when it is used:
In file included from include/linux/compiler_types.h:68:0,
from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
struct shim_fw_info fw_info;
^Make sure to initialize it before returning an error from ish_query_loader_prop().
--- drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/hid/intel-ish-hid/ishtp-fw-loader.c +2 -0
@@ -480,6 +480,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data, sizeof(ldr_xfer_query_resp));if (rv <0 ) { client_data->flag_retry = true; + *fw_info = (struct shim_fw_info ){};return rv; }
@@ -489,6 +490,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data,"data size %d is not equal to size of loader_xfer_query_response %zu\n" , rv, sizeof(struct loader_xfer_query_response)); client_data->flag_retry = true; + *fw_info = (struct shim_fw_info ){};return -EMSGSIZE ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 114/314 usb: dwc3: gadget: Properly handle ClearFeature(halt)
In reply to Greg Kroah-HartmanFrom: Thinh Nguyen <[email protected]>
[ Upstream commit cb11ea56f37a36288cdd0a4799a983ee3aa437dd ]
DWC3 must not issue CLEAR_STALL command to control endpoints. The controller automatically clears the STALL when it receives the SETUP token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must stop any active transfer from the endpoint and give back all the requests to the function drivers.
--- drivers/usb/dwc3/gadget.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)
drivers/usb/dwc3/gadget.c +33 -3
@@ -1505,6 +1505,10 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r {int i; +/* If req->trb is not set, then the request has not started */ +if (!req->trb) +return ; +/* * If request was already started, this means we had to * stop the transfer. With that we also need to ignore
@@ -1595,6 +1599,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) {struct dwc3_gadget_ep_cmd_params params;struct dwc3 *dwc = dep->dwc; +struct dwc3_request *req; +struct dwc3_request *tmp;int ret;if (usb_endpoint_xfer_isoc (dep->endpoint.desc)) {
@@ -1631,13 +1637,37 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)else dep->flags |=DWC3_EP_STALL ; }else { +/* +* Don't issue CLEAR_STALL command to control endpoints. The +* controller automatically clears the STALL when it receives +* the SETUP token. +*/ +if (dep->number <=1 ) { + dep->flags &= ~(DWC3_EP_STALL |DWC3_EP_WEDGE ); +return 0 ; + } ret =dwc3_send_clear_stall_ep_cmd (dep); -if (ret) +if (ret) {dev_err (dwc->dev,"failed to clear STALL on %s\n" , dep->name); -else - dep->flags &= ~(DWC3_EP_STALL |DWC3_EP_WEDGE ); +return ret; + } + + dep->flags &= ~(DWC3_EP_STALL |DWC3_EP_WEDGE ); + +dwc3_stop_active_transfer (dep, true, true); + +list_for_each_entry_safe (req, tmp, &dep->started_list, list) +dwc3_gadget_move_cancelled_request (req); + +list_for_each_entry_safe (req, tmp, &dep->pending_list, list) +dwc3_gadget_move_cancelled_request (req); + +if (!(dep->flags &DWC3_EP_END_TRANSFER_PENDING )) { + dep->flags &= ~DWC3_EP_DELAY_START ; +dwc3_gadget_ep_cleanup_cancelled_requests (dep); + } }return ret;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 115/314 usb: dwc3: gadget: Properly handle failed kick_transfer
In reply to Greg Kroah-HartmanFrom: Thinh Nguyen <[email protected]>
[ Upstream commit 8d99087c2db863c5fa3a4a1f3cb82b3a493705ca ]
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we should properly end an active transfer and give back all the started requests. However if it's for an isoc endpoint, the failure maybe due to bus-expiry status. In this case, don't give back the requests and wait for the next retry.
--- drivers/usb/dwc3/gadget.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/usb/dwc3/gadget.c +16 -8
@@ -1217,6 +1217,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) } } +static void dwc3_gadget_ep_cleanup_cancelled_requests (struct dwc3_ep *dep); +static int __dwc3_gadget_kick_transfer (struct dwc3_ep *dep) {struct dwc3_gadget_ep_cmd_params params;
@@ -1256,14 +1258,20 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) ret =dwc3_send_gadget_ep_cmd (dep, cmd, ¶ms);if (ret <0 ) { -/* -* FIXME we need to iterate over the list of requests -* here and stop, unmap, free and del each of the linked -* requests instead of what we do now. -*/ -if (req->trb) -memset (req->trb,0 ,sizeof (struct dwc3_trb )); -dwc3_gadget_del_and_unmap_request (dep, req, ret); +struct dwc3_request *tmp; + +if (ret == -EAGAIN ) +return ret; + +dwc3_stop_active_transfer (dep, true, true); + +list_for_each_entry_safe (req, tmp, &dep->started_list, list) +dwc3_gadget_move_cancelled_request (req); + +/* If ep isn't started, then there's no end transfer pending */ +if (!(dep->flags &DWC3_EP_END_TRANSFER_PENDING )) +dwc3_gadget_ep_cleanup_cancelled_requests (dep); +return ret; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 116/314 staging: wilc1000: Increase the size of wid_list array
In reply to Greg Kroah-HartmanFrom: Oscar Carter <[email protected]>
[ Upstream commit a4338ed2e1cf724563956ec5f91deeaabfedbe23 ]
Increase by one the size of wid_list array as index variable can reach a value of 5. If this happens, an out-of-bounds access is performed.
Also, use a #define instead of a hard-coded literal for the new array size.
Addresses-Coverity-ID: 1451981 ("Out-of-bounds access")
--- drivers/staging/wilc1000/wilc_hif.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/staging/wilc1000/wilc_hif.c +3 -1
@@ -12,6 +12,8 @@#define WILC_FALSE_FRMWR_CHANNEL 100#define WILC_MAX_RATES_SUPPORTED 12 +#define WILC_SCAN_WID_LIST_SIZE 6 +struct wilc_rcvd_mac_info {u8 status; };
@@ -233,7 +235,7 @@ int wilc_scan(struct wilc_vif *vif, u8 scan_source, u8 scan_type, void *user_arg, struct cfg80211_scan_request *request) { int result = 0; -struct wid wid_list[5 ]; +struct wid wid_list[WILC_SCAN_WID_LIST_SIZE ];u32 index =0 ;u32 i, scan_timeout;u8 *buffer;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 117/314 staging: sm750fb: add missing case while setting FB_VISUAL
In reply to Greg Kroah-HartmanFrom: Matej Dujava <[email protected]>
[ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ]
Switch statement does not contain all cases: 8, 16, 24, 32. This patch will add missing one (24)
--- drivers/staging/sm750fb/sm750.c | 1 + 1 file changed, 1 insertion(+)
drivers/staging/sm750fb/sm750.c +1 -0
@@ -898,6 +898,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index) fix->visual =FB_VISUAL_PSEUDOCOLOR ;break ;case 16 : +case 24 :case 32 : fix->visual =FB_VISUAL_TRUECOLOR ;break ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 118/314 PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ]
If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.
Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver.
--- drivers/pci/controller/pci-v3-semi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pci-v3-semi.c +1 -1
@@ -743,7 +743,7 @@ static int v3_pci_probe(struct platform_device *pdev)int ret;LIST_HEAD (res); - host =pci_alloc_host_bridge (sizeof (*v3)); + host =devm_pci_alloc_host_bridge (dev,sizeof (*v3));if (!host)return -ENOMEM ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 119/314 i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output
In reply to Greg Kroah-HartmanFrom: Russell King <[email protected]>
[ Upstream commit 88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ]
The IRQ log output is supposed to appear on a single line. However, commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info on error") resulted in it being printed one-entry-per-line, which is excessively long.
Fixing this is not a trivial matter; using pr_cont() doesn't work as the previous dev_dbg() may not have been compiled in, or may be dynamic.
Since the rest of this function output is at error level, and is also debug output, promote this to error level as well to avoid this problem.
Reduce the number of always zero prefix digits to save screen real- estate.
--- drivers/i2c/busses/i2c-pxa.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-pxa.c +3 -4
@@ -312,11 +312,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)dev_err (dev,"IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n" ,readl (_IBMR (i2c)),readl (_IDBR (i2c)),readl (_ICR (i2c)),readl (_ISR (i2c))); -dev_dbg (dev,"log: " ); +dev_err (dev,"log:" );for (i =0 ; i < i2c->irqlogidx; i++) -pr_debug ("[%08x:%08x] " , i2c->isrlog[i], i2c->icrlog[i]); - - pr_debug("\n"); +pr_cont (" [%03x:%05x]" , i2c->isrlog[i], i2c->icrlog[i]); + pr_cont("\n"); }#else /* ifdef DEBUG */
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 120/314 serial: amba-pl011: Make sure we initialize the port.lock spinlock
In reply to Greg Kroah-HartmanFrom: John Stultz <[email protected]>
[ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ]
Valentine reported seeing:
[ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c
Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock.
Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console.
This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive.
Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning.
--- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+)
drivers/tty/serial/amba-pl011.c +1 -0
@@ -2585,6 +2585,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.fifosize = uap->fifosize; uap->port.flags =UPF_BOOT_AUTOCONF ; uap->port.line = index; +spin_lock_init (&uap->port.lock); amba_ports[index] = uap;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 121/314 drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
In reply to Greg Kroah-HartmanFrom: Kuppuswamy Sathyanarayanan <[email protected]>
[ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ]
If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception.
So check the return value before attempting the spin lock.
One such example is below:
For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue.
[ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled
Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed.
--- drivers/base/platform.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/base/platform.c +2 -0
@@ -802,6 +802,8 @@ int __init_or_module __platform_driver_probe(struct platform_driver *drv,/* temporary section violation during probe() */ drv->probe = probe; retval = code =__platform_driver_register (drv, module); +if (retval) +return retval;/* * Fixup that section violation, being paranoid about code scanning
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 122/314 PCI: rcar: Fix incorrect programming of OB windows
In reply to Greg Kroah-HartmanFrom: Andrew Murray <[email protected]>
[ Upstream commit 2b9f217433e31d125fb697ca7974d3de3ecc3e92 ]
The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between a CPU address (which is determined by the window number 'x') and a programmed PCI address - Thus allowing the controller to translate CPU accesses into PCI accesses.
However the existing code incorrectly writes the CPU address - lets fix this by writing the PCI address instead.
For memory transactions, existing DT users describe a 1:1 identity mapping and thus this change should have no effect. However the same isn't true for I/O.
--- drivers/pci/controller/pcie-rcar.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/pci/controller/pcie-rcar.c +5 -4
@@ -335,11 +335,12 @@ static struct pci_ops rcar_pcie_ops = { };static void rcar_pcie_setup_window (int win,struct rcar_pcie *pcie, -struct resource *res) +struct resource_entry *window) {/* Setup PCIe address space mappings for each resource */ resource_size_t size;resource_size_t res_start; +struct resource *res = window->res;u32 mask;rcar_pci_write_reg (pcie,0x00000000 ,PCIEPTCTLR (win));
@@ -353,9 +354,9 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie,rcar_pci_write_reg (pcie, mask <<7 ,PCIEPAMR (win));if (res->flags &IORESOURCE_IO ) - res_start =pci_pio_to_address (res->start); + res_start =pci_pio_to_address (res->start) - window->offset;else - res_start = res->start; + res_start = res->start - window->offset;rcar_pci_write_reg (pcie,upper_32_bits (res_start),PCIEPAUR (win)); rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F,
@@ -384,7 +385,7 @@ static int rcar_pcie_setup(struct list_head *resource, struct rcar_pcie *pci)switch (resource_type (res)) {case IORESOURCE_IO :case IORESOURCE_MEM : -rcar_pcie_setup_window (i, pci, res); +rcar_pcie_setup_window (i, pci, win); i++;break ;case IORESOURCE_BUS :
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 123/314 PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges
In reply to Greg Kroah-HartmanFrom: Kai-Heng Feng <[email protected]>
[ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ]
7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge.
Remove this exclusion so we can enable ASPM on these links.
The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings.
[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571
--- drivers/pci/pcie/aspm.c | 10 ---------- 1 file changed, 10 deletions(-)
drivers/pci/pcie/aspm.c +0 -10
@@ -628,16 +628,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)/* Setup initial capable state. Will be updated later */ link->aspm_capable = link->aspm_support; -/* -* If the downstream component has pci bridge function, don't -* do ASPM for now. -*/ -list_for_each_entry (child, &linkbus->devices, bus_list) { -if (pci_pcie_type (child) ==PCI_EXP_TYPE_PCI_BRIDGE ) { - link->aspm_disable =ASPM_STATE_ALL ; -break ; - } - }/* Get and check endpoint acceptable latencies */ list_for_each_entry (child, &linkbus->devices, bus_list) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 124/314 scsi: qla2xxx: Fix warning after FC target reset
In reply to Greg Kroah-HartmanFrom: Viacheslav Dubeyko <[email protected]>
[ Upstream commit f839544ccff60cbe534282aac68858fc3fb278ca ]
Currently, FC target reset finishes with the warning message:
[84010.596893] ------------[ cut here ]------------
[84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm
[84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
[84010.597001] Supported: Yes, External
[84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1
[84010.597006] task: c000000a104c0000 task.stack: c000000b52188000
[84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0
[84010.597008] REGS: c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default)
[84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>
[84010.597015] CR: 48242424 XER: 00000000
[84010.597016] CFAR: d00000001ff45d08 SOFTE: 1
GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102
GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000
GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818
GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0
GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000
GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70
GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080
GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8
[84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx]
[84010.597051] Call Trace:
[84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable)
[84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx]
[84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs]
[84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0
[84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220
[84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110
[84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130
[84010.597080] Instruction dump:
[84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78
[84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180
[84010.597090] ---[ end trace e32abaf6e6fee826 ]---To reproduce:
echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
SYSTEM START
kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0 <...>
kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...>
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0
echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...>
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
kernel: -----------[ cut here ]-----------
kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx]
The issue happens because no real ISP reset is executed. The qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that vha->flags.online will be not zero for ISP reset procedure. This patch sets vha->flags.online to 1 before calling ->abort_isp() for starting the ISP reset.
--- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/qla2xxx/qla_os.c +1 -0
@@ -6295,6 +6295,7 @@ qla2x00_do_dpc(void *data)if (do_reset && !(test_and_set_bit (ABORT_ISP_ACTIVE , &base_vha->dpc_flags))) { + base_vha->flags.online =1 ;ql_dbg (ql_dbg_dpc, base_vha,0x4007 ,"ISP abort scheduled.\n" );if (ha->isp_ops->abort_isp (base_vha)) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 125/314 ALSA: firewire-lib: fix invalid assignment to union data for directional parameter
In reply to Greg Kroah-HartmanFrom: Takashi Sakamoto <[email protected]>
[ Upstream commit 8304cf77c92038cd1c50c27b69d30be695cc8003 ]
Although the value of FDF is used just for outgoing stream, the assignment to union member is done for both directions of stream. At present this causes no issue because the value of same position is reassigned later for opposite stream. However, it's better to add if statement.
--- sound/firewire/amdtp-am824.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/firewire/amdtp-am824.c +2 -1
@@ -82,7 +82,8 @@ int amdtp_am824_set_parameters(struct amdtp_stream *s, unsigned int rate,if (err <0 )return err; - s->ctx_data.rx.fdf =AMDTP_FDF_AM824 | s->sfc; +if (s->direction ==AMDTP_OUT_STREAM ) + s->ctx_data.rx.fdf =AMDTP_FDF_AM824 | s->sfc; p->pcm_channels = pcm_channels; p->midi_ports = midi_ports;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 126/314 power: supply: lp8788: Fix an error handling path in lp8788_charger_probe()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 934ed3847a4ebc75b655659c4d2349ba4337941c ]
In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released.
This can be achieved easily by using the devm_ variant of 'iio_channel_get()'.
This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless.
--- drivers/power/supply/lp8788-charger.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-)
drivers/power/supply/lp8788-charger.c +2 -16
@@ -572,27 +572,14 @@ static void lp8788_setup_adc_channel(struct device *dev,return ;/* ADC channel for battery voltage */ - chan =iio_channel_get (dev, pdata->adc_vbatt); + chan =devm_iio_channel_get (dev, pdata->adc_vbatt); pchg->chan[LP8788_VBATT ] =IS_ERR (chan) ?NULL : chan;/* ADC channel for battery temperature */ - chan =iio_channel_get (dev, pdata->adc_batt_temp); + chan =devm_iio_channel_get (dev, pdata->adc_batt_temp); pchg->chan[LP8788_BATT_TEMP ] =IS_ERR (chan) ?NULL : chan; } -static void lp8788_release_adc_channel (struct lp8788_charger *pchg) -{ -int i; - -for (i =0 ; i <LP8788_NUM_CHG_ADC ; i++) { -if (!pchg->chan[i]) -continue ; - -iio_channel_release (pchg->chan[i]); - pchg->chan[i] =NULL ; - } -} -static ssize_t lp8788_show_charger_status (struct device *dev,struct device_attribute *attr,char *buf) {
@@ -735,7 +722,6 @@ static int lp8788_charger_remove(struct platform_device *pdev)flush_work (&pchg->charger_work);lp8788_irq_unregister (pdev, pchg);lp8788_psy_unregister (pchg); -lp8788_release_adc_channel (pchg);return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 127/314 power: supply: smb347-charger: IRQSTAT_D is volatile
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
[ Upstream commit c32ea07a30630ace950e07ffe7a18bdcc25898e1 ]
Fix failure when USB cable is connected:
smb347 2-006a: reading IRQSTAT_D failed
--- drivers/power/supply/smb347-charger.c | 1 + 1 file changed, 1 insertion(+)
drivers/power/supply/smb347-charger.c +1 -0
@@ -1138,6 +1138,7 @@ static bool smb347_volatile_reg(struct device *dev, unsigned int reg)switch (reg) {case IRQSTAT_A :case IRQSTAT_C : +case IRQSTAT_D :case IRQSTAT_E :case IRQSTAT_F :case STAT_A :
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 128/314 ASoC: SOF: core: fix error return code in sof_probe_continue()
In reply to Greg Kroah-HartmanFrom: Wei Yongjun <[email protected]>
[ Upstream commit 7d8785bc7adbb4dc5ba8ee06994107637848ded8 ]
Fix to return negative error code -ENOMEM from the IPC init error handling case instead of 0, as done elsewhere in this function.
--- sound/soc/sof/core.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/sof/core.c +1 -0
@@ -372,6 +372,7 @@ static int sof_probe_continue(struct snd_sof_dev *sdev)/* init the IPC */ sdev->ipc =snd_sof_ipc_init (sdev);if (!sdev->ipc) { + ret = -ENOMEM ;dev_err (sdev->dev,"error: failed to init DSP IPC %d\n" , ret); goto ipc_err; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 129/314 arm64: dts: msm8996: Fix CSI IRQ types
In reply to Greg Kroah-HartmanFrom: Loic Poulain <[email protected]>
[ Upstream commit 4a4a26317ec8aba575f6b85789a42639937bc1a4 ]
Each IRQ_TYPE_NONE interrupt causes a warning at boot. Fix that by defining an appropriate type.
--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +10 -10
@@ -1681,16 +1681,16 @@ "csi_clk_mux", "vfe0", "vfe1"; - interrupts = <GIC_SPI 78 0>, - <GIC_SPI 79 0>, - <GIC_SPI 80 0>, - <GIC_SPI 296 0>, - <GIC_SPI 297 0>, - <GIC_SPI 298 0>, - <GIC_SPI 299 0>, - <GIC_SPI 309 0>, - <GIC_SPI 314 0>, - <GIC_SPI 315 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csiphy0", "csiphy1", "csiphy2",
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 130/314 scsi: target: loopback: Fix READ with data and sensebytes
In reply to Greg Kroah-HartmanFrom: Bodo Stroesser <[email protected]>
[ Upstream commit c68a56736c129f5dd1632856956f9c3e04bae200 ]
We use tcm_loop with tape emulations running on tcmu.
In case application reads a short tape block with a longer READ, or a long tape block with a short READ, according to SCC spec data has to be tranferred _and_ sensebytes with ILI set and information field containing the residual count. Similar problem also exists when using fixed block size in READ.
Up to now tcm_loop is not prepared to handle sensebytes if input data is provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if necessary, the residual count.
To fix the bug, the same handling for sensebytes as present in tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also.
After adding this handling, the two function now are nearly identical, so I created a single function with two wrappers.
--- drivers/target/loopback/tcm_loop.c | 36 +++++++++++++----------------- 1 file changed, 15 insertions(+), 21 deletions(-)
drivers/target/loopback/tcm_loop.c +15 -21
@@ -545,32 +545,15 @@ static int tcm_loop_write_pending(struct se_cmd *se_cmd)return 0 ; } -static int tcm_loop_queue_data_in (struct se_cmd *se_cmd) +static int tcm_loop_queue_data_or_status (const char *func, +struct se_cmd *se_cmd,u8 scsi_status) {struct tcm_loop_cmd *tl_cmd =container_of (se_cmd, struct tcm_loop_cmd, tl_se_cmd);struct scsi_cmnd *sc = tl_cmd->sc;pr_debug ("%s() called for scsi_cmnd: %p cdb: 0x%02x\n" , - __func__, sc, sc->cmnd[0 ]); - - sc->result =SAM_STAT_GOOD ; -set_host_byte (sc,DID_OK ); -if ((se_cmd->se_cmd_flags &SCF_OVERFLOW_BIT ) || - (se_cmd->se_cmd_flags &SCF_UNDERFLOW_BIT )) -scsi_set_resid (sc, se_cmd->residual_count); - sc->scsi_done (sc); -return 0 ; -} - -static int tcm_loop_queue_status (struct se_cmd *se_cmd) -{ -struct tcm_loop_cmd *tl_cmd =container_of (se_cmd, - struct tcm_loop_cmd, tl_se_cmd); -struct scsi_cmnd *sc = tl_cmd->sc; - -pr_debug ("%s() called for scsi_cmnd: %p cdb: 0x%02x\n" , - __func__, sc, sc->cmnd[0 ]); + func, sc, sc->cmnd[0 ]); if (se_cmd->sense_buffer && ((se_cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) ||
@@ -581,7 +564,7 @@ static int tcm_loop_queue_status(struct se_cmd *se_cmd) sc->result =SAM_STAT_CHECK_CONDITION ;set_driver_byte (sc,DRIVER_SENSE ); }else - sc->result = se_cmd->scsi_status; + sc->result = scsi_status;set_host_byte (sc,DID_OK ); if ((se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) ||
@@ -591,6 +574,17 @@ static int tcm_loop_queue_status(struct se_cmd *se_cmd)return 0 ; } +static int tcm_loop_queue_data_in (struct se_cmd *se_cmd) +{ +return tcm_loop_queue_data_or_status (__func__, se_cmd,SAM_STAT_GOOD ); +} + +static int tcm_loop_queue_status (struct se_cmd *se_cmd) +{ +return tcm_loop_queue_data_or_status (__func__, + se_cmd, se_cmd->scsi_status); +} +static void tcm_loop_queue_tm_rsp (struct se_cmd *se_cmd) { struct tcm_loop_cmd *tl_cmd = container_of(se_cmd,
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 131/314 scsi: mpt3sas: Fix double free warnings
In reply to Greg Kroah-HartmanFrom: Suganath Prabu S <[email protected]>
[ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ]
Fix following warning from Smatch static analyser:
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->hpr_lookup' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->internal_lookup' double freed
--- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/mpt3sas/mpt3sas_base.c +2 -0
@@ -4777,7 +4777,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) }kfree (ioc->hpr_lookup); + ioc->hpr_lookup =NULL ;kfree (ioc->internal_lookup); + ioc->internal_lookup =NULL ;if (ioc->chain_lookup) {for (i =0 ; i < ioc->scsiio_depth; i++) { for (j = ioc->chains_per_prp_buffer;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 132/314 SoC: rsnd: add interrupt support for SSI BUSIF buffer
In reply to Greg Kroah-HartmanFrom: Yongbo Zhang <[email protected]>
[ Upstream commit 66c705d07d784fb6b4622c6e47b6acae357472db ]
SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
--- sound/soc/sh/rcar/gen.c | 8 +++ sound/soc/sh/rcar/rsnd.h | 9 +++ sound/soc/sh/rcar/ssi.c | 145 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+)
sound/soc/sh/rcar/gen.c +8 -0
@@ -224,6 +224,14 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv)RSND_GEN_S_REG (SSI_SYS_STATUS5 ,0x884 ),RSND_GEN_S_REG (SSI_SYS_STATUS6 ,0x888 ),RSND_GEN_S_REG (SSI_SYS_STATUS7 ,0x88c ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE0 ,0x850 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE1 ,0x854 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE2 ,0x858 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE3 ,0x85c ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE4 ,0x890 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE5 ,0x894 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE6 ,0x898 ), +RSND_GEN_S_REG (SSI_SYS_INT_ENABLE7 ,0x89c ),RSND_GEN_S_REG (HDMI0_SEL ,0x9e0 ), RSND_GEN_S_REG(HDMI1_SEL, 0x9e4),
sound/soc/sh/rcar/rsnd.h +9 -0
@@ -189,6 +189,14 @@ enum rsnd_reg {SSI_SYS_STATUS5 ,SSI_SYS_STATUS6 ,SSI_SYS_STATUS7 , +SSI_SYS_INT_ENABLE0 , +SSI_SYS_INT_ENABLE1 , +SSI_SYS_INT_ENABLE2 , +SSI_SYS_INT_ENABLE3 , +SSI_SYS_INT_ENABLE4 , +SSI_SYS_INT_ENABLE5 , +SSI_SYS_INT_ENABLE6 , +SSI_SYS_INT_ENABLE7 ,HDMI0_SEL ,HDMI1_SEL , SSI9_BUSIF0_MODE,
@@ -237,6 +245,7 @@ enum rsnd_reg {#define SSI9_BUSIF_ADINR (i) (SSI9_BUSIF0_ADINR + (i))#define SSI9_BUSIF_DALIGN (i) (SSI9_BUSIF0_DALIGN + (i))#define SSI_SYS_STATUS (i) (SSI_SYS_STATUS0 + (i)) +#define SSI_SYS_INT_ENABLE (i) (SSI_SYS_INT_ENABLE0 + (i))struct rsnd_priv ;
sound/soc/sh/rcar/ssi.c +145 -0
193 lines not on this page · raw message
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 133/314 ASoC: ux500: mop500: Fix some refcounted resources issues
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 4e8748fcaeec073e3ba794871ce86c545e4f961f ]
There are 2 issues here:
- if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()' is a no-op because the 'mop500_dai_links' structure has not been initialized yet, so the referenced are not decremented
- The reference stored in 'mop500_dai_links[i].codecs' is refcounted only once in the probe and must be decremented only once.
--- sound/soc/ux500/mop500.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
sound/soc/ux500/mop500.c +7 -4
@@ -63,10 +63,11 @@ static void mop500_of_node_put(void) {int i; -for (i =0 ; i <2 ; i++) { +for (i =0 ; i <2 ; i++)of_node_put (mop500_dai_links[i].cpus->of_node); -of_node_put (mop500_dai_links[i].codecs->of_node); - } + +/* Both links use the same codec, which is refcounted only once */ +of_node_put (mop500_dai_links[0 ].codecs->of_node); } static int mop500_of_probe(struct platform_device *pdev,
@@ -81,7 +82,9 @@ static int mop500_of_probe(struct platform_device *pdev,if (!(msp_np[0 ] && msp_np[1 ] && codec_np)) {dev_err (&pdev->dev,"Phandle missing or invalid\n" ); -mop500_of_node_put (); +for (i =0 ; i <2 ; i++) +of_node_put (msp_np[i]); +of_node_put (codec_np);return -EINVAL ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 134/314 ASoC: ti: omap-mcbsp: Fix an error handling path in asoc_mcbsp_probe()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit 03990fd58d2b7c8f7d53e514ba9b8749fac260f9 ]
If an error occurs after the call to 'omap_mcbsp_init()', the reference to 'mcbsp->fclk' must be decremented, as already done in the remove function.
This can be achieved easily by using the devm_ variant of 'clk_get()' when the reference is taken in 'omap_mcbsp_init()'
This fixes the leak in the probe and has the side effect to simplify both the error handling path of 'omap_mcbsp_init()' and the remove function.
--- sound/soc/ti/omap-mcbsp.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
sound/soc/ti/omap-mcbsp.c +2 -6
@@ -686,7 +686,7 @@ static int omap_mcbsp_init(struct platform_device *pdev) mcbsp->dma_data[1 ].addr =omap_mcbsp_dma_reg_params (mcbsp,SNDRV_PCM_STREAM_CAPTURE ); - mcbsp->fclk =clk_get (&pdev->dev,"fck" ); + mcbsp->fclk =devm_clk_get (&pdev->dev,"fck" );if (IS_ERR (mcbsp->fclk)) { ret =PTR_ERR (mcbsp->fclk);dev_err (mcbsp->dev,"unable to get fck: %d\n" , ret);
@@ -711,7 +711,7 @@ static int omap_mcbsp_init(struct platform_device *pdev)if (ret) {dev_err (mcbsp->dev,"Unable to create additional controls\n" ); - goto err_thres; +return ret; } }
@@ -724,8 +724,6 @@ static int omap_mcbsp_init(struct platform_device *pdev) err_st:if (mcbsp->pdata->buffer_size)sysfs_remove_group (&mcbsp->dev->kobj, &additional_attr_group); -err_thres: -clk_put (mcbsp->fclk);return ret; }
@@ -1442,8 +1440,6 @@ static int asoc_mcbsp_remove(struct platform_device *pdev)omap_mcbsp_st_cleanup (pdev); -clk_put (mcbsp->fclk); -return 0 ; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 135/314 pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
In reply to Greg Kroah-HartmanFrom: Dafna Hirschfeld <[email protected]>
[ Upstream commit d7faa8ffb6be57bf8233a4b5a636d76b83c51ce7 ]
In function rockchip_dt_node_to_map, a new_map variable is allocated by:
new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
GFP_KERNEL);
This uses devres and attaches new_map to the pinctrl driver. This cause a leak since new_map is not released when the probed driver is removed. Fix it by using kcalloc to allocate new_map and free it in rockchip_dt_free_map
--- drivers/pinctrl/pinctrl-rockchip.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/pinctrl/pinctrl-rockchip.c +4 -3
@@ -506,8 +506,8 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, } map_num += grp->npins; - new_map =devm_kcalloc (pctldev->dev, map_num,sizeof (*new_map), -GFP_KERNEL ); + + new_map =kcalloc (map_num,sizeof (*new_map),GFP_KERNEL );if (!new_map)return -ENOMEM ;
@@ -517,7 +517,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,/* create mux map */ parent =of_get_parent (np);if (!parent) { -devm_kfree (pctldev->dev, new_map); +kfree (new_map);return -EINVAL ; } new_map[0 ].type =PIN_MAP_TYPE_MUX_GROUP ;
@@ -544,6 +544,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,static void rockchip_dt_free_map (struct pinctrl_dev *pctldev,struct pinctrl_map *map,unsigned num_maps) { +kfree (map); }static const struct pinctrl_ops rockchip_pctrl_ops = {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 136/314 dlm: remove BUG() before panic()
In reply to Greg Kroah-HartmanFrom: Arnd Bergmann <[email protected]>
[ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ]
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows that anything after it is unreachable, however the panic still emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG() kills the current process and the subsequent panic() never hits. In most cases, we probably don't really want either and should replace the DLM_ASSERT() statements with WARN_ON(), as has been done for some of them.
Remove the BUG() here so the user at least sees the panic message and we can reliably build randconfig kernels.
--- fs/dlm/dlm_internal.h | 1 - 1 file changed, 1 deletion(-)
fs/dlm/dlm_internal.h +0 -1
@@ -97,7 +97,6 @@ do { \ __LINE__, __FILE__, #x, jiffies); \ {do} \ printk("\n"); \ - BUG(); \ panic("DLM: Record message above and reboot.\n"); \ } \ }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 137/314 USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
In reply to Greg Kroah-HartmanFrom: Wei Yongjun <[email protected]>
[ Upstream commit b919e077cccfbb77beb98809568b2fb0b4d113ec ]
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.
--- drivers/usb/host/ohci-sm501.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/usb/host/ohci-sm501.c +4 -3
@@ -157,9 +157,10 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)* the call to usb_hcd_setup_local_mem() below does just that. */ -if (usb_hcd_setup_local_mem (hcd, mem->start, - mem->start - mem->parent->start, -resource_size (mem)) <0 ) + retval =usb_hcd_setup_local_mem (hcd, mem->start, + mem->start - mem->parent->start, +resource_size (mem)); +if (retval <0 ) goto err5; retval =usb_add_hcd (hcd, irq,IRQF_SHARED );if (retval)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 138/314 clk: ti: composite: fix memory leak
In reply to Greg Kroah-HartmanFrom: Tero Kristo <[email protected]>
[ Upstream commit c7c1cbbc9217ebb5601b88d138d4a5358548de9d ]
The parent_names is never released for a component clock definition, causing some memory leak. Fix by releasing it once it is no longer needed.
--- drivers/clk/ti/composite.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/ti/composite.c +1 -0
@@ -196,6 +196,7 @@ cleanup:if (!cclk->comp_clks[i])continue ;list_del (&cclk->comp_clks[i]->link); +kfree (cclk->comp_clks[i]->parent_names);kfree (cclk->comp_clks[i]); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 139/314 PCI: Fix pci_register_host_bridge() device_register() error handling
In reply to Greg Kroah-HartmanFrom: Rob Herring <[email protected]>
[ Upstream commit 1b54ae8327a4d630111c8d88ba7906483ec6010b ]
If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on.
--- drivers/pci/probe.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/pci/probe.c +3 -2
@@ -867,9 +867,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge) goto free; err =device_register (&bridge->dev); -if (err) +if (err) {put_device (&bridge->dev); - + goto free; + } bus->bridge =get_device (&bridge->dev);device_enable_async_suspend (bus->bridge);pci_set_bus_of_node (bus);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 140/314 powerpc/64: Dont initialise init_task->thread.regs
In reply to Greg Kroah-HartmanFrom: Michael Ellerman <[email protected]>
[ Upstream commit 7ffa8b7dc11752827329e4e84a574ea6aaf24716 ]
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON:
smp: Bringing up secondary CPUs ...
------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from:
usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR.
We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \
.ksp = INIT_SP, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */
LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
add r1,r3,r1
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero.
As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more.
--- arch/powerpc/include/asm/processor.h | 1 - arch/powerpc/kernel/head_64.S | 9 +-------- 2 files changed, 1 insertion(+), 9 deletions(-)
arch/powerpc/include/asm/processor.h +0 -1
@@ -291,7 +291,6 @@ struct thread_struct {#else #define INIT_THREAD { \ .ksp = INIT_SP, \ - .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ .addr_limit = KERNEL_DS, \ .fpexc_mode = 0, \ .fscr = FSCR_TAR | FSCR_EBB \
arch/powerpc/kernel/head_64.S +1 -8
@@ -945,15 +945,8 @@ start_here_multiplatform: std r0,0(r4) #endif - /* The following gets the stack set up with the regs */ - /* pointing to the real addr of the kernel stack. This is */ - /* all done to support the C function call below which sets */ - /* up the htab. This is done because we have relocated the */ - /* kernel but are still running in real mode. */ - - LOAD_REG_ADDR(r3,init_thread_union) - /* set up a stack pointer */ + LOAD_REG_ADDR(r3,init_thread_union) LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 141/314 tty: n_gsm: Fix SOF skipping
In reply to Greg Kroah-HartmanFrom: Gregory CLEMENT <[email protected]>
[ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ]
For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred.
Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional.
--- drivers/tty/n_gsm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/tty/n_gsm.c +1 -7
@@ -669,7 +669,6 @@ static void gsm_data_kick(struct gsm_mux *gsm) {struct gsm_msg *msg, *nmsg;int len; -int skip_sof =0 ;list_for_each_entry_safe (msg, nmsg, &gsm->tx_list, list) {if (gsm->constipated && msg->addr)
@@ -691,15 +690,10 @@ static void gsm_data_kick(struct gsm_mux *gsm)print_hex_dump_bytes ("gsm_data_kick: " ,DUMP_PREFIX_OFFSET , gsm->txframe, len); - -if (gsm->output (gsm, gsm->txframe + skip_sof, - len - skip_sof) <0 ) +if (gsm->output (gsm, gsm->txframe, len) <0 )break ;/* FIXME: Can eliminate one SOF in many more cases */ gsm->tx_bytes -= msg->len; -/* For a burst of frames skip the extra SOF within the -burst */ - skip_sof =1 ;list_del (&msg->list);kfree (msg);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 142/314 tty: n_gsm: Fix waking up upper tty layer when room available
In reply to Greg Kroah-HartmanFrom: Gregory CLEMENT <[email protected]>
[ Upstream commit 01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ]
Warn the upper layer when n_gms is ready to receive data again. Without this the associated virtual tty remains blocked indefinitely.
--- drivers/tty/n_gsm.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)
drivers/tty/n_gsm.c +22 -4
@@ -665,7 +665,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,* FIXME: lock against link layer control transmissions */ -static void gsm_data_kick (struct gsm_mux *gsm) +static void gsm_data_kick (struct gsm_mux *gsm,struct gsm_dlci *dlci) {struct gsm_msg *msg, *nmsg;int len;
@@ -697,6 +697,24 @@ static void gsm_data_kick(struct gsm_mux *gsm)list_del (&msg->list);kfree (msg); + +if (dlci) { +tty_port_tty_wakeup (&dlci->port); + }else { +int i =0 ; + +for (i =0 ; i <NUM_DLCI ; i++) { +struct gsm_dlci *dlci; + + dlci = gsm->dlci[i]; +if (dlci ==NULL ) { + i++; +continue ; + } + +tty_port_tty_wakeup (&dlci->port); + } + } } }
@@ -748,7 +766,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)/* Add to the actual output queue */ list_add_tail (&msg->list, &gsm->tx_list); gsm->tx_bytes += msg->len; -gsm_data_kick (gsm); +gsm_data_kick (gsm, dlci); }/**
@@ -1209,7 +1227,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,gsm_control_reply (gsm,CMD_FCON ,NULL ,0 );/* Kick the link in case it is idling */ spin_lock_irqsave (&gsm->tx_lock, flags); -gsm_data_kick (gsm); +gsm_data_kick (gsm,NULL );spin_unlock_irqrestore (&gsm->tx_lock, flags);break ;case CMD_FCOFF :
@@ -2519,7 +2537,7 @@ static void gsmld_write_wakeup(struct tty_struct *tty)/* Queue poll */ clear_bit (TTY_DO_WRITE_WAKEUP , &tty->flags);spin_lock_irqsave (&gsm->tx_lock, flags); -gsm_data_kick (gsm); +gsm_data_kick (gsm,NULL );if (gsm->tx_bytes <TX_THRESH_LO ) {gsm_dlci_data_sweep (gsm); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 143/314 ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback
In reply to Greg Kroah-HartmanFrom: Erwin Burema <[email protected]>
[ Upstream commit 10ce77e4817fef99e1166be7e6685a80c63bf77f ]
For USB sound devices using implicit feedback the endpoint used for this feedback should be able to be opened twice, once for required feedback and second time for audio data. This way these devices can be put in duplex audio mode. Since this only works if the settings of the endpoint don't change a check is included for this.
This fixes bug 207023 ("MOTU M2 regression on duplex audio") and should also fix bug 103751 ("M-Audio Fast Track Ultra usb audio device will not operate full-duplex")
--- sound/usb/card.h | 1 + sound/usb/endpoint.c | 195 ++++++++++++++++++++++++++++++++++++++++++- sound/usb/pcm.c | 5 ++ 3 files changed, 197 insertions(+), 4 deletions(-)
sound/usb/card.h +1 -0
@@ -108,6 +108,7 @@ struct snd_usb_endpoint {int iface, altsetting;int skip_packets;/* quirks for devices to ignore the first n packets in a stream */ +bool is_implicit_feedback;/* This endpoint is used as implicit feedback */ spinlock_t lock;struct list_head list;
sound/usb/endpoint.c +191 -4
213 lines not on this page · raw message
sound/usb/pcm.c +5 -0
@@ -386,6 +386,8 @@ add_sync_ep:if (!subs->sync_endpoint)return -EINVAL ; + subs->sync_endpoint->is_implicit_feedback =1 ; + subs->data_endpoint->sync_master = subs->sync_endpoint;return 1 ;
@@ -484,12 +486,15 @@ static int set_sync_endpoint(struct snd_usb_substream *subs, implicit_fb ?SND_USB_ENDPOINT_TYPE_DATA : SND_USB_ENDPOINT_TYPE_SYNC); +if (!subs->sync_endpoint) {if (is_playback && attr ==USB_ENDPOINT_SYNC_NONE )return 0 ;return -EINVAL ; } + subs->sync_endpoint->is_implicit_feedback = implicit_fb; + subs->data_endpoint->sync_master = subs->sync_endpoint;return 0 ;
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 144/314 HID: Add quirks for Trust Panora Graphic Tablet
In reply to Greg Kroah-HartmanFrom: Cristian Klein <[email protected]>
[ Upstream commit fb68ada81e65d593b51544fa43c284322107a742 ]
The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol.
Without these quirks, libinput gets confused about what device it talks to.
For completeness, here is the usbhid-dump:
``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0 003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ```
--- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+)
drivers/hid/hid-ids.h +3 -0
@@ -1147,6 +1147,9 @@#define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882 0x8882#define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883 0x8883 +#define USB_VENDOR_ID_TRUST 0x145f +#define USB_DEVICE_ID_TRUST_PANORA_TABLET 0x0212 +#define USB_VENDOR_ID_TURBOX 0x062a#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201#define USB_DEVICE_ID_ASUS_MD_5110 0x5110
drivers/hid/hid-quirks.c +1 -0
@@ -168,6 +168,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883), HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_TRUST, USB_DEVICE_ID_TRUST_PANORA_TABLET), HID_QUIRK_MULTI_INPUT | HID_QUIRK_HIDINPUT_FORCE }, { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT },
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 145/314 PCI/PM: Assume ports without DLL Link Active train links in 100 ms
In reply to Greg Kroah-HartmanFrom: Mika Westerberg <[email protected]>
[ Upstream commit ec411e02b7a2e785a4ed9ed283207cd14f48699d ]
Kai-Heng Feng reported that it takes a long time (> 1 s) to resume Thunderbolt-connected devices from both runtime suspend and system sleep (s2idle).
This was because some Downstream Ports that support > 5 GT/s do not also support Data Link Layer Link Active reporting. Per PCIe r5.0 sec 6.6.1:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3).
Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not.
Previously we tried to wait for Link training to complete, but since there was no DLL Link Active reporting, all we could do was wait the worst-case 1000 ms, then another 100 ms.
Instead of using the supported speeds to determine whether to wait for Link training, check whether the port supports DLL Link Active reporting. The Ports in question do not, so we'll wait only the 100 ms required for Ports that support Link speeds <= 5 GT/s.
This of course assumes these Ports always train the Link within 100 ms even if they are operating at > 5 GT/s, which is not required by the spec.
--- drivers/pci/pci.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)
drivers/pci/pci.c +21 -9
@@ -4608,7 +4608,8 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)* pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? -* @delay: Delay to wait after link has become active (in ms) +* @delay: Delay to wait after link has become active (in ms). Specify %0 +* for no delay. * * Use this to wait till link becomes active or inactive. */
@@ -4649,7 +4650,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,msleep (10 ); timeout -=10 ; } -if (active && ret) +if (active && ret && delay)msleep (delay);else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
@@ -4770,17 +4771,28 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)if (!pcie_downstream_port (dev))return ; -if (pcie_get_speed_cap (dev) <=PCIE_SPEED_5_0GT ) { -pci_dbg (dev,"waiting %d ms for downstream link\n" , delay); -msleep (delay); - }else { -pci_dbg (dev,"waiting %d ms for downstream link, after activation\n" , - delay); -if (!pcie_wait_for_link_delay (dev, true, delay)) { +/* +* Per PCIe r5.0, sec 6.6.1, for downstream ports that support +* speeds > 5 GT/s, we must wait for link training to complete +* before the mandatory delay. +* +* We can only tell when link training completes via DLL Link +* Active, which is required for downstream ports that support +* speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common +* devices do not implement Link Active reporting even when it's +* required, so we'll check for that directly instead of checking +* the supported link speed. We assume devices without Link Active +* reporting can train in 100 ms regardless of speed. +*/ +if (dev->link_active_reporting) { +pci_dbg (dev,"waiting for link to train\n" ); +if (!pcie_wait_for_link_delay (dev, true,0 )) {/* Did not train, no need to wait any further */ return ; } } +pci_dbg (child,"waiting %d ms to become accessible\n" , delay); +msleep (delay);if (!pci_device_is_present (child)) {pci_dbg (child,"waiting additional %d ms to become accessible\n" , delay);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 146/314 habanalabs: increase timeout during reset
In reply to Greg Kroah-HartmanFrom: Oded Gabbay <[email protected]>
[ Upstream commit 7a65ee046b2238e053f6ebb610e1a082cfc49490 ]
When doing training, the DL framework (e.g. tensorflow) performs hundreds of thousands of memory allocations and mappings. In case the driver needs to perform hard-reset during training, the driver kills the application and unmaps all those memory allocations. Unfortunately, because of that large amount of mappings, the driver isn't able to do that in the current timeout (5 seconds). Therefore, increase the timeout significantly to 30 seconds to avoid situation where the driver resets the device with active mappings, which sometime can cause a kernel bug.
BTW, it doesn't mean we will spend all the 30 seconds because the reset thread checks every one second if the unmap operation is done.
--- drivers/misc/habanalabs/habanalabs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/habanalabs/habanalabs.h +1 -1
@@ -23,7 +23,7 @@#define HL_MMAP_CB_MASK (0x8000000000000000ull >> PAGE_SHIFT) -#define HL_PENDING_RESET_PER_SEC 5 +#define HL_PENDING_RESET_PER_SEC 30#define HL_DEVICE_TIMEOUT_USEC 1000000/* 1 s */
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 147/314 ipmi: use vzalloc instead of kmalloc for user creation
In reply to Greg Kroah-HartmanFrom: Feng Tang <[email protected]>
[ Upstream commit 7c47a219b95d0e06b5ef5fcc7bad807895015eac ]
We met mulitple times of failure of staring bmc-watchdog, due to the runtime memory allocation failure of order 4.
bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.110720180833 11/07/2018
Call Trace:
dump_stack+0x66/0x8b
warn_alloc+0xfe/0x160
__alloc_pages_slowpath+0xd3e/0xd80
__alloc_pages_nodemask+0x2f0/0x340
kmalloc_order+0x18/0x70
kmalloc_order_trace+0x1d/0xb0
ipmi_create_user+0x55/0x2c0 [ipmi_msghandler]
ipmi_open+0x72/0x110 [ipmi_devintf]
chrdev_open+0xcb/0x1e0
do_dentry_open+0x1ce/0x380
path_openat+0x305/0x14f0
do_filp_open+0x9b/0x110
do_sys_open+0x1bd/0x250
do_syscall_64+0x5b/0x1f0
entry_SYSCALL_64_after_hwframe+0x44/0xa9Using vzalloc/vfree for creating ipmi_user heals the problem
Thanks to Stephen Rothwell for finding the vmalloc.h inclusion issue.
--- drivers/char/ipmi/ipmi_msghandler.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/char/ipmi/ipmi_msghandler.c +4 -3
@@ -33,6 +33,7 @@#include <linux/workqueue.h> #include <linux/uuid.h> #include <linux/nospec.h> +#include <linux/vmalloc.h> #define IPMI_DRIVER_VERSION "39.2"
@@ -1170,7 +1171,7 @@ static void free_user_work(struct work_struct *work) remove_work);cleanup_srcu_struct (&user->release_barrier); -kfree (user); +vfree (user); } int ipmi_create_user(unsigned int if_num,
@@ -1202,7 +1203,7 @@ int ipmi_create_user(unsigned int if_num,if (rv)return rv; - new_user =kmalloc (sizeof (*new_user),GFP_KERNEL ); + new_user =vzalloc (sizeof (*new_user));if (!new_user)return -ENOMEM ;
@@ -1249,7 +1250,7 @@ int ipmi_create_user(unsigned int if_num, out_kfree:srcu_read_unlock (&ipmi_interfaces_srcu, index); -kfree (new_user); +vfree (new_user);return rv; }EXPORT_SYMBOL (ipmi_create_user);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 148/314 powerpc/64s/exception: Fix machine check no-loss idle wakeup
In reply to Greg Kroah-HartmanFrom: Nicholas Piggin <[email protected]>
[ Upstream commit 8a5054d8cbbe03c68dcb0957c291c942132e4101 ]
The architecture allows for machine check exceptions to cause idle wakeups which resume at the 0x200 address which has to return via the idle wakeup code, but the early machine check handler is run first.
The case of a no state-loss sleep is broken because the early handler uses non-volatile register r1 , which is needed for the wakeup protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning to the idle wakeup code. Also update the comment which has become stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection test in qemu powernv model (which is not upstream in qemu yet).
--- arch/powerpc/kernel/exceptions-64s.S | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +8 -6
@@ -1090,17 +1090,19 @@ EXC_COMMON_BEGIN(machine_check_idle_common) bl machine_check_queue_event /* - * We have not used any non-volatile GPRs here, and as a rule - * most exception code including machine check does not. - * Therefore PACA_NAPSTATELOST does not need to be set. Idle - * wakeup will restore volatile registers. + * GPR-loss wakeups are relatively straightforward, because the + * idle sleep code has saved all non-volatile registers on its + * own stack, and r1 in PACAR1. * - * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce. + * For no-loss wakeups the r1 and lr registers used by the + * early machine check handler have to be restored first. r2 is + * the kernel TOC, so no need to restore it. * * Then decrement MCE nesting after finishing with the stack. */ ld r3,_MSR(r1) ld r4,_LINK(r1) + ld r1,GPR1(r1) lhz r11,PACA_IN_MCE(r13) subi r11,r11,1
@@ -1109,7 +1111,7 @@ EXC_COMMON_BEGIN(machine_check_idle_common) mtlr r4 rlwinm r10,r3,47-31,30,31 cmpwi cr1,r10,2 - bltlr cr1 /* no state loss, return to idle caller */ + bltlr cr1 /* no state loss, return to idle caller with r3=SRR1 */ b idle_return_gpr_loss #endif
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 149/314 powerpc/pseries/ras: Fix FWNMI_VALID off by one
In reply to Greg Kroah-HartmanFrom: Nicholas Piggin <[email protected]>
[ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]
This was discovered developing qemu fwnmi sreset support. This off-by-one bug means the last 16 bytes of the rtas area can not be used for a 16 byte save area.
It's not a serious bug, and QEMU implementation has to retain a workaround for old kernels, but it's good to tighten it.
--- arch/powerpc/platforms/pseries/ras.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/powerpc/platforms/pseries/ras.c +3 -2
@@ -395,10 +395,11 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)/* * Some versions of FWNMI place the buffer inside the 4kB page starting at * 0x7000. Other versions place it inside the rtas buffer. We check both. +* Minimum size of the buffer is 16 bytes. */ #define VALID_FWNMI_BUFFER (A ) \ - ((((A) >= 0x7000) && ((A) < 0x7ff0)) || \ - (((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16)))) + ((((A) >= 0x7000) && ((A) <= 0x8000 - 16)) || \ + (((A) >= rtas.base) && ((A) <= (rtas.base + rtas.size - 16))))static inline struct rtas_error_log *fwnmi_get_errlog (void ) {
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 150/314 drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
In reply to Greg Kroah-HartmanFrom: Bharat Gooty <[email protected]>
[ Upstream commit 6f0577d1411337a0d97d545abe4a784e9e611516 ]
During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable.
Hence do not use internal FSM programming sequence for the USB PHY initialization.
--- drivers/phy/broadcom/phy-bcm-sr-usb.c | 55 +-------------------------- 1 file changed, 2 insertions(+), 53 deletions(-)
drivers/phy/broadcom/phy-bcm-sr-usb.c +2 -53
@@ -16,8 +16,6 @@ enum bcm_usb_phy_version { };enum bcm_usb_phy_reg { -PLL_NDIV_FRAC , -PLL_NDIV_INT ,PLL_CTRL ,PHY_CTRL ,PHY_PLL_CTRL ,
@@ -31,18 +29,11 @@ static const u8 bcm_usb_combo_phy_ss[] = { };static const u8 bcm_usb_combo_phy_hs[] = { - [PLL_NDIV_FRAC ] =0x04 , - [PLL_NDIV_INT ] =0x08 , [PLL_CTRL ] =0x0c , [PHY_CTRL ] =0x10 , }; -#define HSPLL_NDIV_INT_VAL 0x13 -#define HSPLL_NDIV_FRAC_VAL 0x1005 -static const u8 bcm_usb_hs_phy[] = { - [PLL_NDIV_FRAC ] =0x0 , - [PLL_NDIV_INT ] =0x4 , [PLL_CTRL ] =0x8 , [PHY_CTRL ] =0xc , };
@@ -52,7 +43,6 @@ enum pll_ctrl_bits {SSPLL_SUSPEND_EN ,PLL_SEQ_START , PLL_LOCK, - PLL_PDIV, }; static const u8 u3pll_ctrl[] = {
@@ -66,29 +56,17 @@ static const u8 u3pll_ctrl[] = {#define HSPLL_PDIV_VAL 0x1static const u8 u2pll_ctrl[] = { - [PLL_PDIV ] =1 , [PLL_RESETB ] =5 , [PLL_LOCK ] =6 , };enum bcm_usb_phy_ctrl_bits {CORERDY , -AFE_LDO_PWRDWNB , -AFE_PLL_PWRDWNB , -AFE_BG_PWRDWNB , -PHY_ISO ,PHY_RESETB ,PHY_PCTL , };#define PHY_PCTL_MASK 0xffff -/* -* 0x0806 of PCTL_VAL has below bits set -* BIT-8 : refclk divider 1 -* BIT-3:2: device mode; mode is not effect -* BIT-1: soft reset active low -*/ -#define HSPHY_PCTL_VAL 0x0806#define SSPHY_PCTL_VAL 0x0006static const u8 u3phy_ctrl[] = {
@@ -98,10 +76,6 @@ static const u8 u3phy_ctrl[] = {static const u8 u2phy_ctrl[] = { [CORERDY ] =0 , - [AFE_LDO_PWRDWNB ] =1 , - [AFE_PLL_PWRDWNB ] =2 , - [AFE_BG_PWRDWNB ] =3 , - [PHY_ISO ] =4 , [PHY_RESETB ] =5 , [PHY_PCTL ] =6 , };
@@ -186,38 +160,13 @@ static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)int ret =0 ;void __iomem *regs = phy_cfg->regs;const u8 *offset; -u32 rd_data; offset = phy_cfg->offset; -writel (HSPLL_NDIV_INT_VAL , regs + offset[PLL_NDIV_INT ]); -writel (HSPLL_NDIV_FRAC_VAL , regs + offset[PLL_NDIV_FRAC ]); - - rd_data =readl (regs + offset[PLL_CTRL ]); - rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV ]); - rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV ]); -writel (rd_data, regs + offset[PLL_CTRL ]); - -/* Set Core Ready high */ -bcm_usb_reg32_setbits (regs + offset[PHY_CTRL ], -BIT (u2phy_ctrl[CORERDY ])); - -/* Maximum timeout for Core Ready done */ -msleep (30 ); - +bcm_usb_reg32_clrbits (regs + offset[PLL_CTRL ], +BIT (u2pll_ctrl[PLL_RESETB ]));bcm_usb_reg32_setbits (regs + offset[PLL_CTRL ],BIT (u2pll_ctrl[PLL_RESETB ])); -bcm_usb_reg32_setbits (regs + offset[PHY_CTRL ], -BIT (u2phy_ctrl[PHY_RESETB ])); - - - rd_data =readl (regs + offset[PHY_CTRL ]); - rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL ]); - rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL ]); -writel (rd_data, regs + offset[PHY_CTRL ]); - -/* Maximum timeout for PLL reset done */ -msleep (30 ); ret =bcm_usb_pll_lock_check (regs + offset[PLL_CTRL ],BIT (u2pll_ctrl[PLL_LOCK ]));
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 151/314 powerpc/ps3: Fix kexec shutdown hang
In reply to Greg Kroah-HartmanFrom: Geoff Levand <[email protected]>
[ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ]
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang.
Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic.
With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered.
--- arch/powerpc/platforms/ps3/mm.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
arch/powerpc/platforms/ps3/mm.c +12 -10
@@ -200,13 +200,14 @@ void ps3_mm_vas_destroy(void) {int result; -DBG ("%s:%d: map.vas_id = %llu\n" , __func__, __LINE__, map.vas_id); -if (map.vas_id) { result =lv1_select_virtual_address_space (0 ); -BUG_ON (result); - result =lv1_destruct_virtual_address_space (map.vas_id); -BUG_ON (result); + result +=lv1_destruct_virtual_address_space (map.vas_id); + +if (result) { +lv1_panic (0 ); + } + map.vas_id =0 ; } }
@@ -304,19 +305,20 @@ static void ps3_mm_region_destroy(struct mem_region *r)int result;if (!r->destroy) { -pr_info ("%s:%d: Not destroying high region: %llxh %llxh\n" , - __func__, __LINE__, r->base, r->size);return ; } -DBG ("%s:%d: r->base = %llxh\n" , __func__, __LINE__, r->base); -if (r->base) { result =lv1_release_memory (r->base); -BUG_ON (result); + +if (result) { +lv1_panic (0 ); + } + r->size = r->base = r->offset =0 ; map.total = map.rm.size; } +ps3_mm_set_repository_highmem (NULL ); }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 152/314 vfio-pci: Mask cap zero
In reply to Greg Kroah-HartmanFrom: Alex Williamson <[email protected]>
[ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ]
The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map.
Seen on an NVIDIA Tesla T4.
--- drivers/vfio/pci/vfio_pci_config.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/vfio/pci/vfio_pci_config.c +6 -1
@@ -1460,7 +1460,12 @@ static int vfio_cap_init(struct vfio_pci_device *vdev)if (ret)return ret; -if (cap <=PCI_CAP_ID_MAX ) { +/* +* ID 0 is a NULL capability, conflicting with our fake +* PCI_CAP_ID_BASIC. As it has no content, consider it +* hidden for now. +*/ +if (cap && cap <=PCI_CAP_ID_MAX ) { len = pci_cap_length[cap];if (len ==0xFF ) {/* Variable length */ len =vfio_cap_len (vdev, cap, pos);
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 153/314 usb/ohci-platform: Fix a warning when hibernating
In reply to Greg Kroah-HartmanFrom: Qais Yousef <[email protected]>
[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]
The following warning was observed when attempting to suspend to disk using a USB flash as a swap device.
[ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]---
The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform.
--- drivers/usb/host/ohci-platform.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/usb/host/ohci-platform.c +5 -0
@@ -299,6 +299,11 @@ static int ohci_platform_resume(struct device *dev) }ohci_resume (hcd, false); + +pm_runtime_disable (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); +return 0 ; }#endif /* CONFIG_PM_SLEEP */
Signature · 9 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Greg Kroah-Hartman
maintainerPATCH 154/314 drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
In reply to Greg Kroah-HartmanFrom: Roy Spliet <[email protected]>
[ Upstream commit e4337877c5d578722c0716f131fb774522013cf5 ]
When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined behaviour, likely a nullptr exception or use-after-free troubles.
--- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +2 -1
@@ -1037,7 +1037,8 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)return 0 ; fail: -mdp5_destroy (pdev); +if (mdp5_kms) +mdp5_destroy (pdev);return ret; }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 155/314 ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit 0e0e10fde0e9808d1991268f5dca69fb36c025f7 ]
The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low).
Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV.
--- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +12 -0
@@ -742,6 +742,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Toshiba Encore WT8-A */ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"TOSHIBA" ), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | +BYT_RT5640_JD_SRC_JD2_IN4N | +BYT_RT5640_OVCD_TH_2000UA | +BYT_RT5640_OVCD_SF_0P75 | +BYT_RT5640_JD_NOT_INV | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 156/314 USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
In reply to Greg Kroah-HartmanFrom: Tang Bin <[email protected]>
[ Upstream commit d49292025f79693d3348f8e2029a8b4703be0f0a ]
The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it.
--- drivers/usb/host/ehci-mxc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/host/ehci-mxc.c +2 -0
@@ -50,6 +50,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } irq =platform_get_irq (pdev,0 ); +if (irq <0 ) +return irq; hcd =usb_create_hcd (&ehci_mxc_hc_driver, dev,dev_name (dev));if (!hcd)
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 157/314 tty: n_gsm: Fix bogus i++ in gsm_data_kick
In reply to Greg Kroah-HartmanFrom: Gregory CLEMENT <[email protected]>
[ Upstream commit 4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46 ]
When submitting the previous fix "tty: n_gsm: Fix waking up upper tty layer when room available". It was suggested to switch from a while to a for loop, but when doing it, there was a remaining bogus i++.
This patch removes this i++ and also reorganizes the code making it more compact.
--- drivers/tty/n_gsm.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)
drivers/tty/n_gsm.c +3 -11
@@ -703,17 +703,9 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) }else {int i =0 ; -for (i =0 ; i <NUM_DLCI ; i++) { -struct gsm_dlci *dlci; - - dlci = gsm->dlci[i]; -if (dlci ==NULL ) { - i++; -continue ; - } - -tty_port_tty_wakeup (&dlci->port); - } +for (i =0 ; i <NUM_DLCI ; i++) +if (gsm->dlci[i]) +tty_port_tty_wakeup (&gsm->dlci[i]->port); } } }
Signature · 1 line
2.25.1
Greg Kroah-Hartman
maintainerPATCH 158/314 fpga: dfl: afu: Corrected error handling levels
In reply to Greg Kroah-HartmanFrom: Souptick Joarder <[email protected]>
[ Upstream commit c9d7e3da1f3c4cf5dddfc5d7ce4d76d013aba1cc ]
Corrected error handling goto sequnece. Level put_pages should be called when pinned pages >= 0 && pinned != npages. Level free_pages should be called when pinned pages < 0.
--- drivers/fpga/dfl-afu-dma-region.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/fpga/dfl-afu-dma-region.c +2 -2
@@ -61,10 +61,10 @@ static int afu_dma_pin_pages(struct dfl_feature_platform_data *pdata, region->pages);if (pinned <0 ) { ret = pinned; - goto put_pages; + goto free_pages; }else if (pinned != npages) { ret = -EFAULT ; - goto free_pages; + goto put_pages; }dev_dbg (dev,"%d pages pinned\n" , pinned);
Signature · 1 line
2.25.1