Skip to contentSkip to conversation

5.4.49-rc1 review

PATCH In review Greg Kroah-Hartman 4 participants 321 messages Jun 23, 2020 – Jun 24, 2020 Page 2 of 2

Subsystems (7)
lore
Share & tools
lore
author maintainer
#159 lore raw

PATCH 159/314 clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ]

Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready.

This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e4322aa7 ("of: platform: Batch fwnode parsing when adding all top level devices")

Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
 samsung_i2s_probe+0x768/0x8f0
 platform_drv_probe+0x50/0xa8
 really_probe+0x108/0x370
 driver_probe_device+0x54/0xb8
 __device_attach_driver+0x90/0xc0
 bus_for_each_drv+0x70/0xc8
 __device_attach+0xdc/0x140
 device_initial_probe+0x10/0x18
 bus_probe_device+0x94/0xa0
 deferred_probe_work_func+0x70/0xa8
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x470
 kthread+0x134/0x160
 ret_from_fork+0x10/0x1c
Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
---[ end trace ccf721c9400ddbd6 ]---
---
 drivers/clk/samsung/clk-exynos5433.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/samsung/clk-exynos5433.c +2 -1
index 4b1aa9382ad28..6f29ecd0442e1 100644
@@ -1706,7 +1706,8 @@ static const struct samsung_gate_clock peric_gate_clks[] __initconst = {
 	GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric",
 			ENABLE_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_i2s1_peric",
-			ENABLE_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 6,
+			CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
Signature · 1 line
2.25.1
author maintainer
#160 lore raw

PATCH 160/314 RDMA/hns: Bugfix for querying qkey

In reply to Greg Kroah-Hartman

From: Lijun Ou <[email protected]>

[ Upstream commit 349be276509455ac2f19fa4051ed773082c6a27e ]

The qkey queried through the query ud qp verb is a fixed value and it should be read from qp context.

Fixes 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +1 -1
index 4540b00ccee94..9a8053bd01e22 100644
@@ -4564,7 +4564,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
 	qp_attr->path_mig_state = IB_MIG_ARMED;
 	qp_attr->ah_attr.type   = RDMA_AH_ATTR_TYPE_ROCE;
 	if (hr_qp->ibqp.qp_type == IB_QPT_UD)
-		qp_attr->qkey = V2_QKEY_VAL;
+		qp_attr->qkey = le32_to_cpu(context.qkey_xrcd);
 
 	qp_attr->rq_psn = roce_get_field(context.byte_108_rx_reqepsn,
 					 V2_QPC_BYTE_108_RX_REQ_EPSN_M,
Signature · 1 line
2.25.1
author maintainer
#161 lore raw

PATCH 161/314 RDMA/hns: Fix cmdq parameter of querying pf timer resource

In reply to Greg Kroah-Hartman

From: Lang Cheng <[email protected]>

[ Upstream commit 441c88d5b3ff80108ff536c6cf80591187015403 ]

The firmware has reduced the number of descriptions of command HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise the hardware will report error 4(CMD_NEXT_ERR).

Fixes 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 32 ++++++++--------------
 1 file changed, 12 insertions(+), 20 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +12 -20
index 9a8053bd01e22..0502c90c83edd 100644
@@ -1349,34 +1349,26 @@ static int hns_roce_query_pf_resource(struct hns_roce_dev *hr_dev)
 static int hns_roce_query_pf_timer_resource(struct hns_roce_dev *hr_dev)
 {
 	struct hns_roce_pf_timer_res_a *req_a;
-	struct hns_roce_cmq_desc desc[2];
-	int ret, i;
+	struct hns_roce_cmq_desc desc;
+	int ret;
 
-	for (i = 0; i < 2; i++) {
-		hns_roce_cmq_setup_basic_desc(&desc[i],
-					      HNS_ROCE_OPC_QUERY_PF_TIMER_RES,
-					      true);
+	hns_roce_cmq_setup_basic_desc(&desc, HNS_ROCE_OPC_QUERY_PF_TIMER_RES,
+				      true);
 
-		if (i == 0)
-			desc[i].flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT);
-		else
-			desc[i].flag &= ~cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT);
-	}
-
-	ret = hns_roce_cmq_send(hr_dev, desc, 2);
+	ret = hns_roce_cmq_send(hr_dev, &desc, 1);
 	if (ret)
 		return ret;
 
-	req_a = (struct hns_roce_pf_timer_res_a *)desc[0].data;
+	req_a = (struct hns_roce_pf_timer_res_a *)desc.data;
 
 	hr_dev->caps.qpc_timer_bt_num =
-				roce_get_field(req_a->qpc_timer_bt_idx_num,
-					PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_M,
-					PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_S);
+		roce_get_field(req_a->qpc_timer_bt_idx_num,
+			       PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_M,
+			       PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_S);
 	hr_dev->caps.cqc_timer_bt_num =
-				roce_get_field(req_a->cqc_timer_bt_idx_num,
-					PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_M,
-					PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_S);
+		roce_get_field(req_a->cqc_timer_bt_idx_num,
+			       PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_M,
+			       PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_S);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#162 lore raw

PATCH 162/314 scsi: target: tcmu: Userspace must not complete queued commands

In reply to Greg Kroah-Hartman

From: Bodo Stroesser <[email protected]>

[ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ]

When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command.

If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list.

To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring.

Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done.

[mkp: fix checkpatch warnings]

---
 drivers/target/target_core_user.c | 154 ++++++++++++++----------------
 1 file changed, 71 insertions(+), 83 deletions(-)
drivers/target/target_core_user.c +71 -83
index 9425354aef99c..70c64e69a1d29 100644
@@ -882,41 +882,24 @@ static inline size_t tcmu_cmd_get_cmd_size(struct tcmu_cmd *tcmu_cmd,
 	return command_size;
 }
 
-static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo,
-				struct timer_list *timer)
+static void tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo,
+				 struct timer_list *timer)
 {
-	struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;
-	int cmd_id;
-
-	if (tcmu_cmd->cmd_id)
-		goto setup_timer;
-
-	cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT);
-	if (cmd_id < 0) {
-		pr_err("tcmu: Could not allocate cmd id.\n");
-		return cmd_id;
-	}
-	tcmu_cmd->cmd_id = cmd_id;
-
-	pr_debug("allocated cmd %u for dev %s tmo %lu\n", tcmu_cmd->cmd_id,
-		 udev->name, tmo / MSEC_PER_SEC);
-
-setup_timer:
 	if (!tmo)
-		return 0;
+		return;
 
 	tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo));
 	if (!timer_pending(timer))
 		mod_timer(timer, tcmu_cmd->deadline);
 
-	return 0;
+	pr_debug("Timeout set up for cmd %p, dev = %s, tmo = %lu\n", tcmu_cmd,
+		 tcmu_cmd->tcmu_dev->name, tmo / MSEC_PER_SEC);
 }
 
 static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd)
 {
 	struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;
 	unsigned int tmo;
-	int ret;
 
 	/*
 	 * For backwards compat if qfull_time_out is not set use
@@ -931,13 +914,11 @@ static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd)
 	else
 		tmo = TCMU_TIME_OUT;
 
-	ret = tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer);
-	if (ret)
-		return ret;
+	tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer);
 
 	list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue);
-	pr_debug("adding cmd %u on dev %s to ring space wait queue\n",
-		 tcmu_cmd->cmd_id, udev->name);
+	pr_debug("adding cmd %p on dev %s to ring space wait queue\n",
+		 tcmu_cmd, udev->name);
 	return 0;
 }
 
@@ -959,7 +940,7 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err)
 	struct tcmu_mailbox *mb;
 	struct tcmu_cmd_entry *entry;
 	struct iovec *iov;
-	int iov_cnt, ret;
+	int iov_cnt, cmd_id;
 	uint32_t cmd_head;
 	uint64_t cdb_off;
 	bool copy_to_data_area;
@@ -1060,14 +1041,21 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err)
 	}
 	entry->req.iov_bidi_cnt = iov_cnt;
 
-	ret = tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out,
-				   &udev->cmd_timer);
-	if (ret) {
-		tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt);
+	cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT);
+	if (cmd_id < 0) {
+		pr_err("tcmu: Could not allocate cmd id.\n");
 
+		tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt);
 		*scsi_err = TCM_OUT_OF_RESOURCES;
 		return -1;
 	}
+	tcmu_cmd->cmd_id = cmd_id;
+
+	pr_debug("allocated cmd id %u for cmd %p dev %s\n", tcmu_cmd->cmd_id,
+		 tcmu_cmd, udev->name);
+
+	tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out, &udev->cmd_timer);
+
 	entry->hdr.cmd_id = tcmu_cmd->cmd_id;
 
 	/*
@@ -1279,50 +1267,39 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 	return handled;
 }
 
-static int tcmu_check_expired_cmd(int id, void *p, void *data)
+static void tcmu_check_expired_ring_cmd(struct tcmu_cmd *cmd)
 {
-	struct tcmu_cmd *cmd = p;
-	struct tcmu_dev *udev = cmd->tcmu_dev;
-	u8 scsi_status;
 	struct se_cmd *se_cmd;
-	bool is_running;
-
-	if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
-		return 0;
 
 	if (!time_after(jiffies, cmd->deadline))
-		return 0;
+		return;
 
-	is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags);
+	set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags);
+	list_del_init(&cmd->queue_entry);
 	se_cmd = cmd->se_cmd;
+	cmd->se_cmd = NULL;
 
-	if (is_running) {
-		/*
-		 * If cmd_time_out is disabled but qfull is set deadline
-		 * will only reflect the qfull timeout. Ignore it.
-		 */
-		if (!udev->cmd_time_out)
-			return 0;
+	pr_debug("Timing out inflight cmd %u on dev %s.\n",
+		 cmd->cmd_id, cmd->tcmu_dev->name);
 
-		set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags);
-		/*
-		 * target_complete_cmd will translate this to LUN COMM FAILURE
-		 */
-		scsi_status = SAM_STAT_CHECK_CONDITION;
-		list_del_init(&cmd->queue_entry);
-		cmd->se_cmd = NULL;
-	} else {
-		list_del_init(&cmd->queue_entry);
-		idr_remove(&udev->commands, id);
-		tcmu_free_cmd(cmd);
-		scsi_status = SAM_STAT_TASK_SET_FULL;
-	}
+	target_complete_cmd(se_cmd, SAM_STAT_CHECK_CONDITION);
+}
 
-	pr_debug("Timing out cmd %u on dev %s that is %s.\n",
-		 id, udev->name, is_running ? "inflight" : "queued");
+static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd)
+{
+	struct se_cmd *se_cmd;
 
-	target_complete_cmd(se_cmd, scsi_status);
-	return 0;
+	if (!time_after(jiffies, cmd->deadline))
+		return;
+
+	list_del_init(&cmd->queue_entry);
+	se_cmd = cmd->se_cmd;
+	tcmu_free_cmd(cmd);
+
+	pr_debug("Timing out queued cmd %p on dev %s.\n",
+		  cmd, cmd->tcmu_dev->name);
+
+	target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL);
 }
 
 static void tcmu_device_timedout(struct tcmu_dev *udev)
@@ -1407,16 +1384,15 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
 	return &udev->se_dev;
 }
 
-static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
+static void run_qfull_queue(struct tcmu_dev *udev, bool fail)
 {
 	struct tcmu_cmd *tcmu_cmd, *tmp_cmd;
 	LIST_HEAD(cmds);
-	bool drained = true;
 	sense_reason_t scsi_ret;
 	int ret;
 
 	if (list_empty(&udev->qfull_queue))
-		return true;
+		return;
 
 	pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail);
 
@@ -1425,11 +1401,10 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
 	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) {
 		list_del_init(&tcmu_cmd->queue_entry);
 
-	        pr_debug("removing cmd %u on dev %s from queue\n",
-		         tcmu_cmd->cmd_id, udev->name);
+		pr_debug("removing cmd %p on dev %s from queue\n",
+			 tcmu_cmd, udev->name);
 
 		if (fail) {
-			idr_remove(&udev->commands, tcmu_cmd->cmd_id);
 			/*
 			 * We were not able to even start the command, so
 			 * fail with busy to allow a retry in case runner
@@ -1444,10 +1419,8 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
 
 		ret = queue_cmd_ring(tcmu_cmd, &scsi_ret);
 		if (ret < 0) {
-		        pr_debug("cmd %u on dev %s failed with %u\n",
-			         tcmu_cmd->cmd_id, udev->name, scsi_ret);
-
-			idr_remove(&udev->commands, tcmu_cmd->cmd_id);
+			pr_debug("cmd %p on dev %s failed with %u\n",
+				 tcmu_cmd, udev->name, scsi_ret);
 			/*
 			 * Ignore scsi_ret for now. target_complete_cmd
 			 * drops it.
@@ -1462,13 +1435,11 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
 			 * the queue
 			 */
 			list_splice_tail(&cmds, &udev->qfull_queue);
-			drained = false;
 			break;
 		}
 	}
 
 	tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
-	return drained;
 }
 
 static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)
@@ -1652,6 +1623,8 @@ static void tcmu_dev_kref_release(struct kref *kref)
 		if (tcmu_check_and_free_pending_cmd(cmd) != 0)
 			all_expired = false;
 	}
+	if (!list_empty(&udev->qfull_queue))
+		all_expired = false;
 	idr_destroy(&udev->commands);
 	WARN_ON(!all_expired);
 
@@ -2037,9 +2010,6 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 	mutex_lock(&udev->cmdr_lock);
 
 	idr_for_each_entry(&udev->commands, cmd, i) {
-		if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags))
-			continue;
-
 		pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n",
 			  cmd->cmd_id, udev->name,
 			  test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags));
@@ -2077,6 +2047,8 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 
 	del_timer(&udev->cmd_timer);
 
+	run_qfull_queue(udev, false);
+
 	mutex_unlock(&udev->cmdr_lock);
 }
 
@@ -2698,6 +2670,7 @@ static void find_free_blocks(void)
 static void check_timedout_devices(void)
 {
 	struct tcmu_dev *udev, *tmp_dev;
+	struct tcmu_cmd *cmd, *tmp_cmd;
 	LIST_HEAD(devs);
 
 	spin_lock_bh(&timed_out_udevs_lock);
@@ -2708,9 +2681,24 @@ static void check_timedout_devices(void)
 		spin_unlock_bh(&timed_out_udevs_lock);
 
 		mutex_lock(&udev->cmdr_lock);
-		idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL);
 
-		tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer);
+		/*
+		 * If cmd_time_out is disabled but qfull is set deadline
+		 * will only reflect the qfull timeout. Ignore it.
+		 */
+		if (udev->cmd_time_out) {
+			list_for_each_entry_safe(cmd, tmp_cmd,
+						 &udev->inflight_queue,
+						 queue_entry) {
+				tcmu_check_expired_ring_cmd(cmd);
+			}
+			tcmu_set_next_deadline(&udev->inflight_queue,
+					       &udev->cmd_timer);
+		}
+		list_for_each_entry_safe(cmd, tmp_cmd, &udev->qfull_queue,
+					 queue_entry) {
+			tcmu_check_expired_queue_cmd(cmd);
+		}
 		tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
 
 		mutex_unlock(&udev->cmdr_lock);
Signature · 1 line
2.25.1
author maintainer
#163 lore raw

PATCH 163/314 firmware: imx: scu: Fix possible memory leak in imx_scu_probe()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit 89f12d6509bff004852c51cb713a439a86816b24 ]

'chan_name' is malloced in imx_scu_probe() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak.

Fixes edbee095fafb ("firmware: imx: add SCU firmware driver support")
---
 drivers/firmware/imx/imx-scu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/firmware/imx/imx-scu.c +1 -0
index e48d971ffb617..a3b11bc71dcb8 100644
@@ -300,6 +300,7 @@ static int imx_scu_probe(struct platform_device *pdev)
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to request mbox chan %s ret %d\n",
 					chan_name, ret);
+			kfree(chan_name);
 			return ret;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#164 lore raw

PATCH 164/314 fuse: fix copy_file_range cache issues

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

[ Upstream commit 2c4656dfd994538176db30ce09c02cc0dfc361ae ]

a) Dirty cache needs to be written back not just in the writeback_cache case, since the dirty pages may come from memory maps.

b) The fuse_writeback_range() helper takes an inclusive interval, so the end position needs to be pos+len-1 instead of pos+len.

Fixes 88bc7d5097a1 ("fuse: add support for copy_file_range()")
---
 fs/fuse/file.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
fs/fuse/file.c +8 -12
index 713d55a61890e..e730e3d8ad996 100644
@@ -3280,13 +3280,11 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in,
 	if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb)
 		return -EXDEV;
 
-	if (fc->writeback_cache) {
-		inode_lock(inode_in);
-		err = fuse_writeback_range(inode_in, pos_in, pos_in + len);
-		inode_unlock(inode_in);
-		if (err)
-			return err;
-	}
+	inode_lock(inode_in);
+	err = fuse_writeback_range(inode_in, pos_in, pos_in + len - 1);
+	inode_unlock(inode_in);
+	if (err)
+		return err;
 
 	inode_lock(inode_out);
 
@@ -3294,11 +3292,9 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in,
 	if (err)
 		goto out;
 
-	if (fc->writeback_cache) {
-		err = fuse_writeback_range(inode_out, pos_out, pos_out + len);
-		if (err)
-			goto out;
-	}
+	err = fuse_writeback_range(inode_out, pos_out, pos_out + len - 1);
+	if (err)
+		goto out;
 
 	if (is_unstable)
 		set_bit(FUSE_I_SIZE_UNSTABLE, &fi_out->state);
Signature · 1 line
2.25.1
author maintainer
#165 lore raw

PATCH 165/314 fuse: copy_file_range should truncate cache

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

[ Upstream commit 9b46418c40fe910e6537618f9932a8be78a3dd6c ]

After the copy operation completes the cache is not up-to-date. Truncate all pages in the interval that has successfully been copied.

Truncating completely copied dirty pages is okay, since the data has been overwritten anyway. Truncating partially copied dirty pages is not okay; add a comment for now.

Fixes 88bc7d5097a1 ("fuse: add support for copy_file_range()")
---
 fs/fuse/file.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
fs/fuse/file.c +22 -0
index e730e3d8ad996..66214707a9456 100644
@@ -3292,6 +3292,24 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in,
 	if (err)
 		goto out;
 
+	/*
+	 * Write out dirty pages in the destination file before sending the COPY
+	 * request to userspace.  After the request is completed, truncate off
+	 * pages (including partial ones) from the cache that have been copied,
+	 * since these contain stale data at that point.
+	 *
+	 * This should be mostly correct, but if the COPY writes to partial
+	 * pages (at the start or end) and the parts not covered by the COPY are
+	 * written through a memory map after calling fuse_writeback_range(),
+	 * then these partial page modifications will be lost on truncation.
+	 *
+	 * It is unlikely that someone would rely on such mixed style
+	 * modifications.  Yet this does give less guarantees than if the
+	 * copying was performed with write(2).
+	 *
+	 * To fix this a i_mmap_sem style lock could be used to prevent new
+	 * faults while the copy is ongoing.
+	 */
 	err = fuse_writeback_range(inode_out, pos_out, pos_out + len - 1);
 	if (err)
 		goto out;
@@ -3315,6 +3333,10 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in,
 	if (err)
 		goto out;
 
+	truncate_inode_pages_range(inode_out->i_mapping,
+				   ALIGN_DOWN(pos_out, PAGE_SIZE),
+				   ALIGN(pos_out + outarg.size, PAGE_SIZE) - 1);
+
 	if (fc->writeback_cache) {
 		fuse_write_update_size(inode_out, pos_out + outarg.size);
 		file_update_time(file_out);
Signature · 1 line
2.25.1
author maintainer
#166 lore raw

PATCH 166/314 arm64: tegra: Fix ethernet phy-mode for Jetson Xavier

In reply to Greg Kroah-Hartman

From: Jon Hunter <[email protected]>

[ Upstream commit bba25915b172c72f6fa635f091624d799e3c9cae ]

The 'phy-mode' property is currently defined as 'rgmii' for Jetson Xavier. This indicates that the RGMII RX and TX delays are set by the MAC and the internal delays set by the PHY are not used.

If the Marvell PHY driver is enabled, such that it is used and not the generic PHY, ethernet failures are seen (DHCP is failing to obtain an IP address) and this is caused because the Marvell PHY driver is disabling the internal RX and TX delays. For Jetson Xavier the internal PHY RX and TX delay should be used and so fix this by setting the 'phy-mode' to 'rgmii-id' and not 'rgmii'.

Fixes f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194")
---
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +1 -1
index 02909a48dfcd9..7899759a12f80 100644
@@ -32,7 +32,7 @@
 
 			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
 			phy-handle = <&phy>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 
 			mdio {
 				#address-cells = <1>;
Signature · 1 line
2.25.1
author maintainer
#167 lore raw

PATCH 167/314 arm64: tegra: Fix flag for 64-bit resources in ranges property

In reply to Greg Kroah-Hartman

From: Vidya Sagar <[email protected]>

[ Upstream commit 3482a7afb261e2de9269a7f9ad0f4a3a82a83a53 ]

Fix flag in PCIe controllers device-tree nodes 'ranges' property to correctly represent 64-bit resources.

Fixes 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/nvidia/tegra194.dtsi +6 -6
index 457b815d57f40..2f3926719434a 100644
@@ -1192,7 +1192,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x30100000 0x0  0x30100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1238,7 +1238,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x32100000 0x0  0x32100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1284,7 +1284,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x34100000 0x0  0x34100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1330,7 +1330,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x36100000 0x0  0x36100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
@@ -1376,7 +1376,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
@@ -1426,7 +1426,7 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x3a100000 0x0  0x3a100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
Signature · 1 line
2.25.1
author maintainer
#168 lore raw

PATCH 168/314 powerpc/64s/pgtable: fix an undefined behaviour

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit c2e929b18cea6cbf71364f22d742d9aad7f4677a ]

Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do,

0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)

Fix it by converting pud_index() and friends to static inline functions.

UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15
shift exponent 34 is too large for 32-bit type 'int'
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
ubsan_epilogue+0x18/0x78
__ubsan_handle_shift_out_of_bounds+0x160/0x21c
walk_pagetables+0x2cc/0x700
walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282
(inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311
ptdump_check_wx+0x8c/0xf0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x194
ret_from_kernel_thread+0x5c/0x74
---
 arch/powerpc/include/asm/book3s/64/pgtable.h | 23 ++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
arch/powerpc/include/asm/book3s/64/pgtable.h +19 -4
index a143d394ff46f..e1eb8aa9cfbbb 100644
@@ -998,10 +998,25 @@ extern struct page *pgd_page(pgd_t pgd);
 #define pud_page_vaddr(pud)	__va(pud_val(pud) & ~PUD_MASKED_BITS)
 #define pgd_page_vaddr(pgd)	__va(pgd_val(pgd) & ~PGD_MASKED_BITS)
 
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1))
-#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1))
-#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1))
-#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1))
+static inline unsigned long pgd_index(unsigned long address)
+{
+	return (address >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1);
+}
+
+static inline unsigned long pud_index(unsigned long address)
+{
+	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
+}
+
+static inline unsigned long pmd_index(unsigned long address)
+{
+	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
+static inline unsigned long pte_index(unsigned long address)
+{
+	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
 
 /*
  * Find an entry in a page-table-directory.  We combine the address region
Signature · 1 line
2.25.1
author maintainer
#169 lore raw

PATCH 169/314 dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zone

In reply to Greg Kroah-Hartman

From: Hannes Reinecke <[email protected]>

[ Upstream commit 489dc0f06a5837f87482c0ce61d830d24e17082e ]

The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense.

---
 drivers/md/dm-zoned-metadata.c | 4 ++--
 drivers/md/dm-zoned-reclaim.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/md/dm-zoned-metadata.c +2 -2
index e0a6cf9239f1c..e6b0039d07aa8 100644
@@ -1589,7 +1589,7 @@ static struct dm_zone *dmz_get_rnd_zone_for_reclaim(struct dmz_metadata *zmd)
 			return dzone;
 	}
 
-	return ERR_PTR(-EBUSY);
+	return NULL;
 }
 
 /*
@@ -1609,7 +1609,7 @@ static struct dm_zone *dmz_get_seq_zone_for_reclaim(struct dmz_metadata *zmd)
 			return zone;
 	}
 
-	return ERR_PTR(-EBUSY);
+	return NULL;
 }
 
 /*
drivers/md/dm-zoned-reclaim.c +2 -2
index e7ace908a9b7d..d50817320e8e3 100644
@@ -349,8 +349,8 @@ static int dmz_do_reclaim(struct dmz_reclaim *zrc)
 
 	/* Get a data zone */
 	dzone = dmz_get_zone_for_reclaim(zmd);
-	if (IS_ERR(dzone))
-		return PTR_ERR(dzone);
+	if (!dzone)
+		return -EBUSY;
 
 	start = jiffies;
 
Signature · 1 line
2.25.1
author maintainer
#170 lore raw

PATCH 170/314 PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port

In reply to Greg Kroah-Hartman

From: Bjorn Helgaas <[email protected]>

[ Upstream commit 7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ]

Except for Endpoints, we enable PTM at enumeration-time. Previously we did not account for the fact that Switch Downstream Ports are not permitted to have a PTM capability; their PTM behavior is controlled by the Upstream Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM capability, we did not mark them as "ptm_enabled", which meant that pci_enable_ptm() on an Endpoint failed because there was no PTM path to it.

Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM enabled.

Fixes eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints")
---
 drivers/pci/pcie/ptm.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)
drivers/pci/pcie/ptm.c +17 -5
index 9361f3aa26ab8..357a454cafa07 100644
@@ -39,10 +39,6 @@ void pci_ptm_init(struct pci_dev *dev)
 	if (!pci_is_pcie(dev))
 		return;
 
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
-	if (!pos)
-		return;
-
 	/*
 	 * Enable PTM only on interior devices (root ports, switch ports,
 	 * etc.) on the assumption that it causes no link traffic until an
@@ -52,6 +48,23 @@ void pci_ptm_init(struct pci_dev *dev)
 	     pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END))
 		return;
 
+	/*
+	 * Switch Downstream Ports are not permitted to have a PTM
+	 * capability; their PTM behavior is controlled by the Upstream
+	 * Port (PCIe r5.0, sec 7.9.16).
+	 */
+	ups = pci_upstream_bridge(dev);
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM &&
+	    ups && ups->ptm_enabled) {
+		dev->ptm_granularity = ups->ptm_granularity;
+		dev->ptm_enabled = 1;
+		return;
+	}
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
+	if (!pos)
+		return;
+
 	pci_read_config_dword(dev, pos + PCI_PTM_CAP, &cap);
 	local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
 
@@ -61,7 +74,6 @@ void pci_ptm_init(struct pci_dev *dev)
 	 * the spec recommendation (PCIe r3.1, sec 7.32.3), select the
 	 * furthest upstream Time Source as the PTM Root.
 	 */
-	ups = pci_upstream_bridge(dev);
 	if (ups && ups->ptm_enabled) {
 		ctrl = PCI_PTM_CTRL_ENABLE;
 		if (ups->ptm_granularity == 0)
Signature · 1 line
2.25.1
author maintainer
#171 lore raw

PATCH 171/314 PCI: dwc: Fix inner MSI IRQ domain registration

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

[ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ]

On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:

debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present!

This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain.

Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI".

---
 drivers/pci/controller/dwc/pcie-designware-host.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/controller/dwc/pcie-designware-host.c +2 -0
index 8615f1548882a..fbcb211cceb43 100644
@@ -263,6 +263,8 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 		return -ENOMEM;
 	}
 
+	irq_domain_update_bus_token(pp->irq_domain, DOMAIN_BUS_NEXUS);
+
 	pp->msi_domain = pci_msi_create_irq_domain(fwnode,
 						   &dw_pcie_msi_domain_info,
 						   pp->irq_domain);
Signature · 1 line
2.25.1
author maintainer
#172 lore raw

PATCH 172/314 PCI: amlogic: meson: Dont use FAST_LINK_MODE to set up link

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]

The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc).

According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:

"Sets all internal timers to fast mode for simulation purposes."

it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not.

Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem.

Fixes 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
[[email protected]: commit log]
---
 drivers/pci/controller/dwc/pci-meson.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/controller/dwc/pci-meson.c +2 -2
index b927a92e3463e..8c9f887048746 100644
@@ -301,11 +301,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
 	meson_cfg_writel(mp, val, PCIE_CFG0);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val &= ~LINK_CAPABLE_MASK;
+	val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE);
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
+	val |= LINK_CAPABLE_X1;
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
Signature · 1 line
2.25.1
author maintainer
#173 lore raw

PATCH 173/314 IB/cma: Fix ports memory leak in cma_configfs

In reply to Greg Kroah-Hartman

From: Maor Gottlieb <[email protected]>

[ Upstream commit 63a3345c2d42a9b29e1ce2d3a4043689b3995cea ]

The allocated ports structure in never freed. The free function should be called by release_cma_ports_group, but the group is never released since we don't remove its default group.

Remove default groups when device group is deleted.

---
 drivers/infiniband/core/cma_configfs.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/infiniband/core/cma_configfs.c +13 -0
index 8b0b5ae22e4c8..726e70b682497 100644
@@ -322,8 +322,21 @@ fail:
 	return ERR_PTR(err);
 }
 
+static void drop_cma_dev(struct config_group *cgroup, struct config_item *item)
+{
+	struct config_group *group =
+		container_of(item, struct config_group, cg_item);
+	struct cma_dev_group *cma_dev_group =
+		container_of(group, struct cma_dev_group, device_group);
+
+	configfs_remove_default_groups(&cma_dev_group->ports_group);
+	configfs_remove_default_groups(&cma_dev_group->device_group);
+	config_item_put(item);
+}
+
 static struct configfs_group_operations cma_subsys_group_ops = {
 	.make_group	= make_cma_dev,
+	.drop_item	= drop_cma_dev,
 };
 
 static const struct config_item_type cma_subsys_type = {
Signature · 1 line
2.25.1
author maintainer
#174 lore raw

PATCH 174/314 watchdog: da9062: No need to ping manually before setting timeout

In reply to Greg Kroah-Hartman

From: Stefan Riedmueller <[email protected]>

[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ]

There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter.

This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset.

---
 drivers/watchdog/da9062_wdt.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/watchdog/da9062_wdt.c +0 -5
index e92f38fcb7a4a..1b9bcfed39e96 100644
@@ -55,11 +55,6 @@ static int da9062_wdt_update_timeout_register(struct da9062_watchdog *wdt,
 					      unsigned int regval)
 {
 	struct da9062 *chip = wdt->hw;
-	int ret;
-
-	ret = da9062_reset_watchdog_timer(wdt);
-	if (ret)
-		return ret;
 
 	regmap_update_bits(chip->regmap,
 				  DA9062AA_CONTROL_D,
Signature · 1 line
2.25.1
author maintainer
#175 lore raw

PATCH 175/314 usb: dwc2: gadget: move gadget resume after the core is in L0 state

In reply to Greg Kroah-Hartman

From: Fabrice Gasnier <[email protected]>

[ Upstream commit 8c935deacebb8fac8f41378701eb79d12f3c2e2d ]

When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN

Call the gadget resume routine after the core is in L0 state.

Fixes f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
---
 drivers/usb/dwc2/core_intr.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/usb/dwc2/core_intr.c +5 -2
index 6af6add3d4c0b..6272b4ae4740f 100644
@@ -421,10 +421,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 			if (ret && (ret != -ENOTSUPP))
 				dev_err(hsotg->dev, "exit power_down failed\n");
 
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
 			call_gadget(hsotg, resume);
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
 		}
-		/* Change to L0 state */
-		hsotg->lx_state = DWC2_L0;
 	} else {
 		if (hsotg->params.power_down)
 			return;
Signature · 1 line
2.25.1
author maintainer
#176 lore raw

PATCH 176/314 USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit 7a0fbcf7c308920bc6116b3a5fb21c8cc5fec128 ]

Clang warns:

drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of address of 'ep->queue' equal to a null pointer is always false [-Wtautological-pointer-compare]

        if (&ep->queue == NULL)
             ~~~~^~~~~    ~~~~

1 warning generated.

It is not wrong, queue is not a pointer so if ep is not NULL, the address of queue cannot be NULL. No other driver does a check like this and this check has been around since the driver was first introduced, presumably with no issues so it does not seem like this check should be something else. Just remove it.

Commit afe956c577b2d ("kbuild: Enable -Wtautological-compare") exposed this but it is not the root cause of the warning.

---
 drivers/usb/gadget/udc/s3c2410_udc.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/usb/gadget/udc/s3c2410_udc.c +0 -4
index f82208fbc2495..5dcc0692b95c7 100644
@@ -251,10 +251,6 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep,
 static void s3c2410_udc_nuke(struct s3c2410_udc *udc,
 		struct s3c2410_ep *ep, int status)
 {
-	/* Sanity check */
-	if (&ep->queue == NULL)
-		return;
-
 	while (!list_empty(&ep->queue)) {
 		struct s3c2410_request *req;
 		req = list_entry(ep->queue.next, struct s3c2410_request,
Signature · 1 line
2.25.1
author maintainer
#177 lore raw

PATCH 177/314 usb: gadget: lpc32xx_udc: dont dereference ep pointer before null check

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit eafa80041645cd7604c4357b1a0cd4a3c81f2227 ]

Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point.

Addresses-Coverity: ("Dereference before null check")

Fixes 24a28e428351 ("USB: gadget driver for LPC32xx")
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/usb/gadget/udc/lpc32xx_udc.c +6 -5
index bf6c81e2f8ccc..6d2f1f98f13df 100644
@@ -1614,17 +1614,17 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep,
 			     const struct usb_endpoint_descriptor *desc)
 {
 	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
-	struct lpc32xx_udc *udc = ep->udc;
+	struct lpc32xx_udc *udc;
 	u16 maxpacket;
 	u32 tmp;
 	unsigned long flags;
 
 	/* Verify EP data */
 	if ((!_ep) || (!ep) || (!desc) ||
-	    (desc->bDescriptorType != USB_DT_ENDPOINT)) {
-		dev_dbg(udc->dev, "bad ep or descriptor\n");
+	    (desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
-	}
+
+	udc = ep->udc;
 	maxpacket = usb_endpoint_maxp(desc);
 	if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) {
 		dev_dbg(udc->dev, "bad ep descriptor's packet size\n");
@@ -1872,7 +1872,7 @@ static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
 {
 	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
-	struct lpc32xx_udc *udc = ep->udc;
+	struct lpc32xx_udc *udc;
 	unsigned long flags;
 
 	if ((!ep) || (ep->hwep_num <= 1))
@@ -1882,6 +1882,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
 	if (ep->is_in)
 		return -EAGAIN;
 
+	udc = ep->udc;
 	spin_lock_irqsave(&udc->lock, flags);
 
 	if (value == 1) {
Signature · 1 line
2.25.1
author maintainer
#178 lore raw

PATCH 178/314 usb: gadget: fix potential double-free in m66592_probe.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 44734a594196bf1d474212f38fe3a0d37a73278b ]

m66592_free_request() is called under label "err_add_udc" and "clean_up", and m66592->ep0_req is not set to NULL after first free, leading to a double-free. Fix this issue by setting m66592->ep0_req to NULL after the first free.

Fixes 0f91349b89f3 ("usb: gadget: convert all users to the new udc infrastructure")
---
 drivers/usb/gadget/udc/m66592-udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/udc/m66592-udc.c +1 -1
index a8288df6aadf0..ea59b56e54023 100644
@@ -1667,7 +1667,7 @@ static int m66592_probe(struct platform_device *pdev)
 
 err_add_udc:
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-
+	m66592->ep0_req = NULL;
 clean_up3:
 	if (m66592->pdata->on_chip) {
 		clk_disable(m66592->clk);
Signature · 1 line
2.25.1
author maintainer
#179 lore raw

PATCH 179/314 usb: gadget: Fix issue with config_ep_by_speed function

In reply to Greg Kroah-Hartman

From: Pawel Laszczak <[email protected]>

[ Upstream commit 5d363120aa548ba52d58907a295eee25f8207ed2 ]

This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter.
This additional parameter allows to find proper usb_ss_ep_comp_descriptor.

Problem has appeared during testing f_tcm (BOT/UAS) driver function.

f_tcm function for SS use array of headers for both BOT/UAS alternate setting:

static struct usb_descriptor_header *uasp_ss_function_desc[] = {
(struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc,

(struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL,
};

The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS.

During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object.

Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc.

This is due to the fact that it searches endpoint based on endpoint address:

        for_each_ep_desc(speed_desc, d_spd) {
                chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
                if (chosen_desc->bEndpoitAddress == _ep->address)
                        goto ep_found;
        }

And in result it uses the descriptor from BOT alternate setting instead UAS.

Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot.

---
 drivers/usb/gadget/composite.c | 78 ++++++++++++++++++++++++++--------
 include/linux/usb/composite.h  |  3 ++
 2 files changed, 64 insertions(+), 17 deletions(-)
drivers/usb/gadget/composite.c +61 -17
index d98ca1566e95d..f75ff1a75dc45 100644
@@ -96,40 +96,43 @@ function_descriptors(struct usb_function *f,
 }
 
 /**
- * next_ep_desc() - advance to the next EP descriptor
+ * next_desc() - advance to the next desc_type descriptor
  * @t: currect pointer within descriptor array
+ * @desc_type: descriptor type
  *
- * Return: next EP descriptor or NULL
+ * Return: next desc_type descriptor or NULL
  *
- * Iterate over @t until either EP descriptor found or
+ * Iterate over @t until either desc_type descriptor found or
  * NULL (that indicates end of list) encountered
  */
 static struct usb_descriptor_header**
-next_ep_desc(struct usb_descriptor_header **t)
+next_desc(struct usb_descriptor_header **t, u8 desc_type)
 {
 	for (; *t; t++) {
-		if ((*t)->bDescriptorType == USB_DT_ENDPOINT)
+		if ((*t)->bDescriptorType == desc_type)
 			return t;
 	}
 	return NULL;
 }
 
 /*
- * for_each_ep_desc()- iterate over endpoint descriptors in the
- *		descriptors list
- * @start:	pointer within descriptor array.
- * @ep_desc:	endpoint descriptor to use as the loop cursor
+ * for_each_desc() - iterate over desc_type descriptors in the
+ * descriptors list
+ * @start: pointer within descriptor array.
+ * @iter_desc: desc_type descriptor to use as the loop cursor
+ * @desc_type: wanted descriptr type
  */
-#define for_each_ep_desc(start, ep_desc) \
-	for (ep_desc = next_ep_desc(start); \
-	      ep_desc; ep_desc = next_ep_desc(ep_desc+1))
+#define for_each_desc(start, iter_desc, desc_type) \
+	for (iter_desc = next_desc(start, desc_type); \
+	     iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type))
 
 /**
- * config_ep_by_speed() - configures the given endpoint
+ * config_ep_by_speed_and_alt() - configures the given endpoint
  * according to gadget speed.
  * @g: pointer to the gadget
  * @f: usb function
  * @_ep: the endpoint to configure
+ * @alt: alternate setting number
  *
  * Return: error code, 0 on success
  *
@@ -142,11 +145,13 @@ next_ep_desc(struct usb_descriptor_header **t)
  * Note: the supplied function should hold all the descriptors
  * for supported speeds
  */
-int config_ep_by_speed(struct usb_gadget *g,
-			struct usb_function *f,
-			struct usb_ep *_ep)
+int config_ep_by_speed_and_alt(struct usb_gadget *g,
+				struct usb_function *f,
+				struct usb_ep *_ep,
+				u8 alt)
 {
 	struct usb_endpoint_descriptor *chosen_desc = NULL;
+	struct usb_interface_descriptor *int_desc = NULL;
 	struct usb_descriptor_header **speed_desc = NULL;
 
 	struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
@@ -182,8 +187,21 @@ int config_ep_by_speed(struct usb_gadget *g,
 	default:
 		speed_desc = f->fs_descriptors;
 	}
+
+	/* find correct alternate setting descriptor */
+	for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) {
+		int_desc = (struct usb_interface_descriptor *)*d_spd;
+
+		if (int_desc->bAlternateSetting == alt) {
+			speed_desc = d_spd;
+			goto intf_found;
+		}
+	}
+	return -EIO;
+
+intf_found:
 	/* find descriptors */
-	for_each_ep_desc(speed_desc, d_spd) {
+	for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) {
 		chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
 		if (chosen_desc->bEndpointAddress == _ep->address)
 			goto ep_found;
@@ -237,6 +255,32 @@ ep_found:
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt);
+
+/**
+ * config_ep_by_speed() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed(struct usb_gadget *g,
+			struct usb_function *f,
+			struct usb_ep *_ep)
+{
+	return config_ep_by_speed_and_alt(g, f, _ep, 0);
+}
 EXPORT_SYMBOL_GPL(config_ep_by_speed);
 
 /**
include/linux/usb/composite.h +3 -0
index 8675e145ea8b3..2040696d75b6e 100644
@@ -249,6 +249,9 @@ int usb_function_activate(struct usb_function *);
 
 int usb_interface_id(struct usb_configuration *, struct usb_function *);
 
+int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f,
+				struct usb_ep *_ep, u8 alt);
+
 int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
 			struct usb_ep *_ep);
 
Signature · 1 line
2.25.1
author maintainer
#180 lore raw

PATCH 180/314 scripts: headers_install: Exit with error on config leak

In reply to Greg Kroah-Hartman

From: Siddharth Gupta <[email protected]>

[ Upstream commit 5967577231f9b19acd5a59485e9075964065bbe3 ]

Misuse of CONFIG_* in UAPI headers should result in an error. These config options can be set in userspace by the user application which includes these headers to control the APIs and structures being used in a kernel which supports multiple targets.

---
 scripts/headers_install.sh | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
scripts/headers_install.sh +6 -5
index a07668a5c36b1..94a833597a884 100755
@@ -64,7 +64,7 @@ configs=$(sed -e '
 	d
 ' $OUTFILE)
 
-# The entries in the following list are not warned.
+# The entries in the following list do not result in an error.
 # Please do not add a new entry. This list is only for existing ones.
 # The list will be reduced gradually, and deleted eventually. (hopefully)
 #
@@ -98,18 +98,19 @@ include/uapi/linux/raw.h:CONFIG_MAX_RAW_DEVS
 
 for c in $configs
 do
-	warn=1
+	leak_error=1
 
 	for ignore in $config_leak_ignores
 	do
 		if echo "$INFILE:$c" | grep -q "$ignore$"; then
-			warn=
+			leak_error=
 			break
 		fi
 	done
 
-	if [ "$warn" = 1 ]; then
-		echo "warning: $INFILE: leak $c to user-space" >&2
+	if [ "$leak_error" = 1 ]; then
+		echo "error: $INFILE: leak $c to user-space" >&2
+		exit 1
 	fi
 done
 
Signature · 1 line
2.25.1
author maintainer
#181 lore raw

PATCH 181/314 RDMA/iw_cxgb4: cleanup device debugfs entries on ULD remove

In reply to Greg Kroah-Hartman

From: Potnuri Bharat Teja <[email protected]>

[ Upstream commit 49ea0c036ede81f126f1a9389d377999fdf5c5a1 ]

Remove device specific debugfs entries immediately if LLD detaches a particular ULD device in case of fatal PCI errors.

---
 drivers/infiniband/hw/cxgb4/device.c | 1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/cxgb4/device.c +1 -0
index 599340c1f0b82..541dbcf22d0eb 100644
@@ -953,6 +953,7 @@ void c4iw_dealloc(struct uld_ctx *ctx)
 static void c4iw_remove(struct uld_ctx *ctx)
 {
 	pr_debug("c4iw_dev %p\n", ctx->dev);
+	debugfs_remove_recursive(ctx->dev->debugfs_root);
 	c4iw_unregister_device(ctx->dev);
 	c4iw_dealloc(ctx);
 }
Signature · 1 line
2.25.1
author maintainer
#182 lore raw

PATCH 182/314 x86/apic: Make TSC deadline timer detection message visible

In reply to Greg Kroah-Hartman

From: Borislav Petkov <[email protected]>

[ Upstream commit de308d1815c9e8fe602a958c5c76142ff6501d75 ]

The commit

c84cb3735fd5 ("x86/apic: Move TSC deadline timer debug printk")

removed the message which said that the deadline timer was enabled. It added a pr_debug() message which is issued when deadline timer validation succeeds.

Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise pr_debug() calls get optimized away if DEBUG is not defined in the compilation unit.

Therefore, make the above message pr_info() so that it is visible in dmesg.

---
 arch/x86/kernel/apic/apic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/apic/apic.c +1 -1
index 25b8c45467fcd..fce94c799f015 100644
@@ -2099,7 +2099,7 @@ void __init init_apic_mappings(void)
 	unsigned int new_apicid;
 
 	if (apic_validate_deadline_timer())
-		pr_debug("TSC deadline timer available\n");
+		pr_info("TSC deadline timer available\n");
 
 	if (x2apic_mode) {
 		boot_cpu_physical_apicid = read_apic_id();
Signature · 1 line
2.25.1
author maintainer
#183 lore raw

PATCH 183/314 mfd: stmfx: Reset chip on resume as supply was disabled

In reply to Greg Kroah-Hartman

From: Amelie Delaunay <[email protected]>

[ Upstream commit e583649d87ec090444aa5347af0927cd6e8581ae ]

STMFX supply is disabled during suspend. To avoid a too early access to the STMFX firmware on resume, reset the chip and wait for its firmware to be loaded.

Fixes 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
---
 drivers/mfd/stmfx.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/mfd/stmfx.c +7 -0
index 857991cb3cbb8..fde6541e347c8 100644
@@ -501,6 +501,13 @@ static int stmfx_resume(struct device *dev)
 		}
 	}
 
+	/* Reset STMFX - supply has been stopped during suspend */
+	ret = stmfx_chip_reset(stmfx);
+	if (ret) {
+		dev_err(stmfx->dev, "Failed to reset chip: %d\n", ret);
+		return ret;
+	}
+
 	ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL,
 			       &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));
 	if (ret)
Signature · 1 line
2.25.1
author maintainer
#184 lore raw

PATCH 184/314 mfd: stmfx: Fix stmfx_irq_init error path

In reply to Greg Kroah-Hartman

From: Amelie Delaunay <[email protected]>

[ Upstream commit 60c2c4bcb9202acad4cc26af20b44b6bd7874f7b ]

In case the interrupt signal can't be configured, IRQ domain needs to be removed.

Fixes 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
---
 drivers/mfd/stmfx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/mfd/stmfx.c +7 -2
index fde6541e347c8..1977fe95f876c 100644
@@ -287,14 +287,19 @@ static int stmfx_irq_init(struct i2c_client *client)
 
 	ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin);
 	if (ret)
-		return ret;
+		goto irq_exit;
 
 	ret = devm_request_threaded_irq(stmfx->dev, client->irq,
 					NULL, stmfx_irq_handler,
 					irqtrigger | IRQF_ONESHOT,
 					"stmfx", stmfx);
 	if (ret)
-		stmfx_irq_exit(client);
+		goto irq_exit;
+
+	return 0;
+
+irq_exit:
+	stmfx_irq_exit(client);
 
 	return ret;
 }
Signature · 1 line
2.25.1
author maintainer
#185 lore raw

PATCH 185/314 mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt

In reply to Greg Kroah-Hartman

From: Amelie Delaunay <[email protected]>

[ Upstream commit 97eda5dcc2cde5dcc778bef7a9344db3b6bf8ef5 ]

When STMFX supply is stopped, spurious interrupt can occur. To avoid that, disable the interrupt in suspend before disabling the regulator and re-enable it at the end of resume.

Fixes 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
---
 drivers/mfd/stmfx.c       | 6 ++++++
 include/linux/mfd/stmfx.h | 1 +
 2 files changed, 7 insertions(+)
drivers/mfd/stmfx.c +6 -0
index 1977fe95f876c..711979afd90a0 100644
@@ -296,6 +296,8 @@ static int stmfx_irq_init(struct i2c_client *client)
 	if (ret)
 		goto irq_exit;
 
+	stmfx->irq = client->irq;
+
 	return 0;
 
 irq_exit:
@@ -486,6 +488,8 @@ static int stmfx_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	disable_irq(stmfx->irq);
+
 	if (stmfx->vdd)
 		return regulator_disable(stmfx->vdd);
 
@@ -529,6 +533,8 @@ static int stmfx_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	enable_irq(stmfx->irq);
+
 	return 0;
 }
 #endif
include/linux/mfd/stmfx.h +1 -0
index 3c67983678ec7..744dce63946e0 100644
@@ -109,6 +109,7 @@ struct stmfx {
 	struct device *dev;
 	struct regmap *map;
 	struct regulator *vdd;
+	int irq;
 	struct irq_domain *irq_domain;
 	struct mutex lock; /* IRQ bus lock */
 	u8 irq_src;
Signature · 1 line
2.25.1
author maintainer
#186 lore raw

PATCH 186/314 powerpc/32s: Dont warn when mapping RO data ROX.

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit 4b19f96a81bceaf0bcf44d79c0855c61158065ec ]

Mapping RO data as ROX is not an issue since that data cannot be modified to introduce an exploit.

PPC64 accepts to have RO data mapped ROX, as a trade off between kernel size and strictness of protection.

On PPC32, kernel size is even more critical as amount of memory is usually small.

Depending on the number of available IBATs, the last IBATs might overflow the end of text. Only warn if it crosses the end of RO data.

---
 arch/powerpc/mm/book3s32/mmu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
arch/powerpc/mm/book3s32/mmu.c +4 -2
index 84d5fab94f8f8..1424a120710e4 100644
@@ -187,6 +187,7 @@ void mmu_mark_initmem_nx(void)
 	int i;
 	unsigned long base = (unsigned long)_stext - PAGE_OFFSET;
 	unsigned long top = (unsigned long)_etext - PAGE_OFFSET;
+	unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
 	unsigned long size;
 
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S_601))
@@ -201,9 +202,10 @@ void mmu_mark_initmem_nx(void)
 		size = block_size(base, top);
 		size = max(size, 128UL << 10);
 		if ((top - base) > size) {
-			if (strict_kernel_rwx_enabled())
-				pr_warn("Kernel _etext not properly aligned\n");
 			size <<= 1;
+			if (strict_kernel_rwx_enabled() && base + size > border)
+				pr_warn("Some RW data is getting mapped X. "
+					"Adjust CONFIG_DATA_SHIFT to avoid that.\n");
 		}
 		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
 		base += size;
Signature · 1 line
2.25.1
author maintainer
#187 lore raw

PATCH 187/314 ASoC: fix incomplete error-handling in img_i2s_in_probe.

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 25bf943e4e7b47282bd86ae7d39e039217ebb007 ]

Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()" if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding "pm_runtime_put()" into this error path.

Fixes f65bb92ca12e ("ASoC: img-i2s-in: Add runtime PM")
---
 sound/soc/img/img-i2s-in.c | 1 +
 1 file changed, 1 insertion(+)
sound/soc/img/img-i2s-in.c +1 -0
index fdd2c73fd2fac..869fe0068cbd3 100644
@@ -482,6 +482,7 @@ static int img_i2s_in_probe(struct platform_device *pdev)
 	if (IS_ERR(rst)) {
 		if (PTR_ERR(rst) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
+			pm_runtime_put(&pdev->dev);
 			goto err_suspend;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#188 lore raw

PATCH 188/314 scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 9d7464b18892332e35ff37f0b024429a1a9835e6 ]

The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier.

---
 drivers/target/target_core_user.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/target/target_core_user.c +3 -3
index 70c64e69a1d29..a497e7c1f4fcc 100644
@@ -1292,13 +1292,13 @@ static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd)
 	if (!time_after(jiffies, cmd->deadline))
 		return;
 
+	pr_debug("Timing out queued cmd %p on dev %s.\n",
+		  cmd, cmd->tcmu_dev->name);
+
 	list_del_init(&cmd->queue_entry);
 	se_cmd = cmd->se_cmd;
 	tcmu_free_cmd(cmd);
 
-	pr_debug("Timing out queued cmd %p on dev %s.\n",
-		  cmd, cmd->tcmu_dev->name);
-
 	target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL);
 }
 
Signature · 1 line
2.25.1
author maintainer
#189 lore raw

PATCH 189/314 clk: bcm2835: Fix return type of bcm2835_register_gate

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit f376c43bec4f8ee8d1ba5c5c4cfbd6e84fb279cb ]

bcm2835_register_gate is used as a callback for the clk_register member of bcm2835_clk_desc, which expects a struct clk_hw * return type but bcm2835_register_gate returns a struct clk *.

This discrepancy is hidden by the fact that bcm2835_register_gate is cast to the typedef bcm2835_clk_register by the _REGISTER macro. This turns out to be a control flow integrity violation, which is how this was noticed.

Change the return type of bcm2835_register_gate to be struct clk_hw * and use clk_hw_register_gate to do so. This should be a non-functional change as clk_register_gate calls clk_hw_register_gate anyways but this is needed to avoid issues with further changes.

---
 drivers/clk/bcm/clk-bcm2835.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clk/bcm/clk-bcm2835.c +5 -5
index 802e488fd3c3d..6e5d635f030f4 100644
@@ -1448,13 +1448,13 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 	return &clock->hw;
 }
 
-static struct clk *bcm2835_register_gate(struct bcm2835_cprman *cprman,
+static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman,
 					 const struct bcm2835_gate_data *data)
 {
-	return clk_register_gate(cprman->dev, data->name, data->parent,
-				 CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
-				 cprman->regs + data->ctl_reg,
-				 CM_GATE_BIT, 0, &cprman->regs_lock);
+	return clk_hw_register_gate(cprman->dev, data->name, data->parent,
+				    CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+				    cprman->regs + data->ctl_reg,
+				    CM_GATE_BIT, 0, &cprman->regs_lock);
 }
 
 typedef struct clk_hw *(*bcm2835_clk_register)(struct bcm2835_cprman *cprman,
Signature · 1 line
2.25.1
author maintainer
#190 lore raw

PATCH 190/314 scsi: ufs-qcom: Fix scheduling while atomic issue

In reply to Greg Kroah-Hartman

From: Jeffrey Hugo <[email protected]>

[ Upstream commit 3be60b564de49875e47974c37fabced893cd0931 ]

ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be called from atomic context in the following flow:

ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors -> ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump -> ufs_qcom_dump_dbg_regs

This causes a boot crash on the Lenovo Miix 630 when the interrupt is handled on the idle thread.

Fix the issue by switching to udelay().

---
 drivers/scsi/ufs/ufs-qcom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/ufs/ufs-qcom.c +3 -3
index 411ef60b2c145..c49e9f6c46f87 100644
@@ -1546,11 +1546,11 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
 
 	/* sleep a bit intermittently as we are dumping too much data */
 	ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper);
-	usleep_range(1000, 1100);
+	udelay(1000);
 	ufs_qcom_testbus_read(hba);
-	usleep_range(1000, 1100);
+	udelay(1000);
 	ufs_qcom_print_unipro_testbus(hba);
-	usleep_range(1000, 1100);
+	udelay(1000);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#191 lore raw

PATCH 191/314 KVM: PPC: Book3S HV: Ignore kmemleak false positives

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 0aca8a5575544bd21b3363058afb8f1e81505150 ]

kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then pud_populate() and pmd_populate() will use __pa() to reference the newly allocated memory.

Since kmemleak is unable to track the physical memory resulting in false positives, silence those by using kmemleak_ignore().

unreferenced object 0xc000201c382a1000 (size 4096):
comm "qemu-kvm", pid 124828, jiffies 4295733767 (age 341.250s) hex dump (first 32 bytes):
c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87 .. ..`.... .r... c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87 .. ....... .....
backtrace:

   [<000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv]
   kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366
   (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590
   [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
   [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
   [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
   [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
   [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
   [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
   [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
   [<0000000048155cd6>] ksys_ioctl+0xd8/0x130
   [<0000000041ffeaa7>] sys_ioctl+0x28/0x40
   [<000000004afc4310>] system_call_exception+0x114/0x1e0
   [<00000000fb70a873>] system_call_common+0xf0/0x278

unreferenced object 0xc0002001f0c03900 (size 256):
comm "qemu-kvm", pid 124830, jiffies 4295735235 (age 326.570s) hex dump (first 32 bytes):
c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87 .. ....... ..... c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87 .. ....... .....
backtrace:

   [<0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv]
   kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356
   (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593
   [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
   [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
   [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
   [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
   [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
   [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
   [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
   [<0000000048155cd6>] ksys_ioctl+0xd8/0x130
   [<0000000041ffeaa7>] sys_ioctl+0x28/0x40
   [<000000004afc4310>] system_call_exception+0x114/0x1e0
   [<00000000fb70a873>] system_call_common+0xf0/0x278
---
 arch/powerpc/kvm/book3s_64_mmu_radix.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_radix.c +14 -2
index 2d415c36a61d3..43b56f8f6bebd 100644
@@ -353,7 +353,13 @@ static struct kmem_cache *kvm_pmd_cache;
 
 static pte_t *kvmppc_pte_alloc(void)
 {
-	return kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL);
+	pte_t *pte;
+
+	pte = kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL);
+	/* pmd_populate() will only reference _pa(pte). */
+	kmemleak_ignore(pte);
+
+	return pte;
 }
 
 static void kvmppc_pte_free(pte_t *ptep)
@@ -363,7 +369,13 @@ static void kvmppc_pte_free(pte_t *ptep)
 
 static pmd_t *kvmppc_pmd_alloc(void)
 {
-	return kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL);
+	pmd_t *pmd;
+
+	pmd = kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL);
+	/* pud_populate() will only reference _pa(pmd). */
+	kmemleak_ignore(pmd);
+
+	return pmd;
 }
 
 static void kvmppc_pmd_free(pmd_t *pmdp)
Signature · 1 line
2.25.1
author maintainer
#192 lore raw

PATCH 192/314 KVM: PPC: Book3S: Fix some RCU-list locks

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit ab8b65be183180c3eef405d449163964ecc4b571 ]

It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish.

arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
no locks held by qemu-kvm/4265.

 stack backtrace:
 CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2
 Call Trace:
 [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable)
 [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
 [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
 [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
 [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
 [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
 [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330
 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130
 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0
 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0
 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200
 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0
 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280
 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278

====
arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4264:
#0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] #1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]

====
arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]

====
arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]

---
 arch/powerpc/kvm/book3s_64_vio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
arch/powerpc/kvm/book3s_64_vio.c +14 -4
index 5834db0a54c66..03b947429e4de 100644
@@ -74,6 +74,7 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
 	struct kvmppc_spapr_tce_iommu_table *stit, *tmp;
 	struct iommu_table_group *table_group = NULL;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) {
 
 		table_group = iommu_group_get_iommudata(grp);
@@ -88,7 +89,9 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
 				kref_put(&stit->kref, kvm_spapr_tce_liobn_put);
 			}
 		}
+		cond_resched_rcu();
 	}
+	rcu_read_unlock();
 }
 
 extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
@@ -106,12 +109,14 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 	if (!f.file)
 		return -EBADF;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) {
 		if (stt == f.file->private_data) {
 			found = true;
 			break;
 		}
 	}
+	rcu_read_unlock();
 
 	fdput(f);
 
@@ -144,6 +149,7 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 	if (!tbl)
 		return -EINVAL;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stit, &stt->iommu_tables, next) {
 		if (tbl != stit->tbl)
 			continue;
@@ -151,14 +157,17 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 		if (!kref_get_unless_zero(&stit->kref)) {
 			/* stit is being destroyed */
 			iommu_tce_table_put(tbl);
+			rcu_read_unlock();
 			return -ENOTTY;
 		}
 		/*
 		 * The table is already known to this KVM, we just increased
 		 * its KVM reference counter and can return.
 		 */
+		rcu_read_unlock();
 		return 0;
 	}
+	rcu_read_unlock();
 
 	stit = kzalloc(sizeof(*stit), GFP_KERNEL);
 	if (!stit) {
@@ -364,18 +373,19 @@ static long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *stt,
 	if (kvmppc_tce_to_ua(stt->kvm, tce, &ua))
 		return H_TOO_HARD;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stit, &stt->iommu_tables, next) {
 		unsigned long hpa = 0;
 		struct mm_iommu_table_group_mem_t *mem;
 		long shift = stit->tbl->it_page_shift;
 
 		mem = mm_iommu_lookup(stt->kvm->mm, ua, 1ULL << shift);
-		if (!mem)
-			return H_TOO_HARD;
-
-		if (mm_iommu_ua_to_hpa(mem, ua, shift, &hpa))
+		if (!mem || mm_iommu_ua_to_hpa(mem, ua, shift, &hpa)) {
+			rcu_read_unlock();
 			return H_TOO_HARD;
+		}
 	}
+	rcu_read_unlock();
 
 	return H_SUCCESS;
 }
Signature · 1 line
2.25.1
author maintainer
#193 lore raw

PATCH 193/314 clk: sprd: return correct type of value for _sprd_pll_recalc_rate

In reply to Greg Kroah-Hartman

From: Chunyan Zhang <[email protected]>

[ Upstream commit c2f30986d418f26abefc2eec90ebf06716c970d2 ]

The function _sprd_pll_recalc_rate() defines return value to unsigned long, but it would return a negative value when malloc fail, changing to return its parent_rate makes more sense, since if the callback .recalc_rate() is not set, the framework returns the parent_rate as well.

---
 drivers/clk/sprd/pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/sprd/pll.c +1 -1
index 640270f51aa56..eb8862752c2b2 100644
@@ -105,7 +105,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
 
 	cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
-		return -ENOMEM;
+		return parent_rate;
 
 	for (i = 0; i < regs_num; i++)
 		cfg[i] = sprd_pll_read(pll, i);
Signature · 1 line
2.25.1
author maintainer
#194 lore raw

PATCH 194/314 clk: ast2600: Fix AHB clock divider for A1

In reply to Greg Kroah-Hartman

From: Eddie James <[email protected]>

[ Upstream commit 2d491066ccd4286538450c227fc5094ceb04b494 ]

The latest specs for the AST2600 A1 chip include some different bit definitions for calculating the AHB clock divider. Implement these in order to get the correct AHB clock value in Linux.

Fixes d3d04f6c330a ("clk: Add support for AST2600 SoC")
---
 drivers/clk/clk-ast2600.c | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)
drivers/clk/clk-ast2600.c +25 -6
index b1318e6b655bc..675cab6fa7814 100644
@@ -599,14 +599,22 @@ static const u32 ast2600_a0_axi_ahb_div_table[] = {
 	2, 2, 3, 5,
 };
 
-static const u32 ast2600_a1_axi_ahb_div_table[] = {
-	4, 6, 2, 4,
+static const u32 ast2600_a1_axi_ahb_div0_tbl[] = {
+	3, 2, 3, 4,
+};
+
+static const u32 ast2600_a1_axi_ahb_div1_tbl[] = {
+	3, 4, 6, 8,
+};
+
+static const u32 ast2600_a1_axi_ahb200_tbl[] = {
+	3, 4, 3, 4, 2, 2, 2, 2,
 };
 
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, chip_id, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -636,11 +644,22 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	else
 		axi_div = 2;
 
+	divbits = (val >> 11) & 0x3;
 	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16))
-		ahb_div = ast2600_a1_axi_ahb_div_table[(val >> 11) & 0x3];
-	else
+	if (chip_id & BIT(16)) {
+		if (!divbits) {
+			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
+			if (val & BIT(16))
+				ahb_div *= 2;
+		} else {
+			if (val & BIT(16))
+				ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits];
+			else
+				ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits];
+		}
+	} else {
 		ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3];
+	}
 
 	hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;
Signature · 1 line
2.25.1
author maintainer
#195 lore raw

PATCH 195/314 misc: xilinx-sdfec: improve get_user_pages_fast() error handling

In reply to Greg Kroah-Hartman

From: John Hubbard <[email protected]>

[ Upstream commit 57343d51613227373759f5b0f2eede257fd4b82e ]

This fixes the case of get_user_pages_fast() returning a -errno. The result needs to be stored in a signed integer. And for safe signed/unsigned comparisons, it's best to keep everything signed. And get_user_pages_fast() also expects a signed value for number of pages to pin.

Therefore, change most relevant variables, from u32 to int. Leave "n" unsigned, for convenience in checking for overflow. And provide a WARN_ON_ONCE() and early return, if overflow occurs.

Also, as long as we're tidying up: rename the page array from page, to pages, in order to match the conventions used in most other call sites.

Fixes 20ec628e8007e ("misc: xilinx_sdfec: Add ability to configure LDPC")
Cc Derek Kiernan <[email protected]>
Cc Dragan Cvetic <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Michal Simek <[email protected]>
---
 drivers/misc/xilinx_sdfec.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)
drivers/misc/xilinx_sdfec.c +17 -10
index 48ba7e02bed72..d4c14b617201e 100644
@@ -602,10 +602,10 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
 			      const u32 depth)
 {
 	u32 reg = 0;
-	u32 res;
-	u32 n, i;
+	int res, i, nr_pages;
+	u32 n;
 	u32 *addr = NULL;
-	struct page *page[MAX_NUM_PAGES];
+	struct page *pages[MAX_NUM_PAGES];
 
 	/*
 	 * Writes that go beyond the length of
@@ -622,15 +622,22 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
 	if ((len * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE)
 		n += 1;
 
-	res = get_user_pages_fast((unsigned long)src_ptr, n, 0, page);
-	if (res < n) {
-		for (i = 0; i < res; i++)
-			put_page(page[i]);
+	if (WARN_ON_ONCE(n > INT_MAX))
+		return -EINVAL;
+
+	nr_pages = n;
+
+	res = get_user_pages_fast((unsigned long)src_ptr, nr_pages, 0, pages);
+	if (res < nr_pages) {
+		if (res > 0) {
+			for (i = 0; i < res; i++)
+				put_page(pages[i]);
+		}
 		return -EINVAL;
 	}
 
-	for (i = 0; i < n; i++) {
-		addr = kmap(page[i]);
+	for (i = 0; i < nr_pages; i++) {
+		addr = kmap(pages[i]);
 		do {
 			xsdfec_regwrite(xsdfec,
 					base_addr + ((offset + reg) *
@@ -639,7 +646,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
 			reg++;
 		} while ((reg < len) &&
 			 ((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE));
-		put_page(page[i]);
+		put_page(pages[i]);
 	}
 	return reg;
 }
Signature · 1 line
2.25.1
author maintainer
#196 lore raw

PATCH 196/314 /dev/mem: Revoke mappings when a driver claims the region

In reply to Greg Kroah-Hartman

From: Dan Williams <[email protected]>

[ Upstream commit 3234ac664a870e6ea69ae3a57d824cd7edbeacc5 ]

Close the hole of holding a mapping over kernel driver takeover event of a given address range.

Commit 90a545e98126 ("restrict /dev/mem to idle io memory ranges") introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the kernel against scenarios where a /dev/mem user tramples memory that a kernel driver owns. However, this protection only prevents *new* read(), write() and mmap() requests. Established mappings prior to the driver calling request_mem_region() are left alone.

Especially with persistent memory, and the core kernel metadata that is stored there, there are plentiful scenarios for a /dev/mem user to violate the expectations of the driver and cause amplified damage.

Teach request_mem_region() to find and shoot down active /dev/mem mappings that it believes it has successfully claimed for the exclusive use of the driver. Effectively a driver call to request_mem_region() becomes a hole-punch on the /dev/mem device.

The typical usage of unmap_mapping_range() is part of truncate_pagecache() to punch a hole in a file, but in this case the implementation is only doing the "first half" of a hole punch. Namely it is just evacuating current established mappings of the "hole", and it relies on the fact that /dev/mem establishes mappings in terms of absolute physical address offsets. Once existing mmap users are invalidated they can attempt to re-establish the mapping, or attempt to continue issuing read(2) / write(2) to the invalidated extent, but they will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can block those subsequent accesses.

Cc Arnd Bergmann <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kees Cook <[email protected]>
Cc Matthew Wilcox <[email protected]>
Cc Russell King <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Fixes 90a545e98126 ("restrict /dev/mem to idle io memory ranges")
---
 drivers/char/mem.c         | 101 ++++++++++++++++++++++++++++++++++++-
 include/linux/ioport.h     |   6 +++
 include/uapi/linux/magic.h |   1 +
 kernel/resource.c          |   5 ++
 4 files changed, 111 insertions(+), 2 deletions(-)
drivers/char/mem.c +99 -2
index 43dd0891ca1ed..31cae88a730ba 100644
@@ -31,11 +31,15 @@
 #include <linux/uio.h>
 #include <linux/uaccess.h>
 #include <linux/security.h>
+#include <linux/pseudo_fs.h>
+#include <uapi/linux/magic.h>
+#include <linux/mount.h>
 
 #ifdef CONFIG_IA64
 # include <linux/efi.h>
 #endif
 
+#define DEVMEM_MINOR	1
 #define DEVPORT_MINOR	4
 
 static inline unsigned long size_inside_page(unsigned long start,
@@ -805,12 +809,64 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
 	return ret;
 }
 
+static struct inode *devmem_inode;
+
+#ifdef CONFIG_IO_STRICT_DEVMEM
+void revoke_devmem(struct resource *res)
+{
+	struct inode *inode = READ_ONCE(devmem_inode);
+
+	/*
+	 * Check that the initialization has completed. Losing the race
+	 * is ok because it means drivers are claiming resources before
+	 * the fs_initcall level of init and prevent /dev/mem from
+	 * establishing mappings.
+	 */
+	if (!inode)
+		return;
+
+	/*
+	 * The expectation is that the driver has successfully marked
+	 * the resource busy by this point, so devmem_is_allowed()
+	 * should start returning false, however for performance this
+	 * does not iterate the entire resource range.
+	 */
+	if (devmem_is_allowed(PHYS_PFN(res->start)) &&
+	    devmem_is_allowed(PHYS_PFN(res->end))) {
+		/*
+		 * *cringe* iomem=relaxed says "go ahead, what's the
+		 * worst that can happen?"
+		 */
+		return;
+	}
+
+	unmap_mapping_range(inode->i_mapping, res->start, resource_size(res), 1);
+}
+#endif
+
 static int open_port(struct inode *inode, struct file *filp)
 {
+	int rc;
+
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
-	return security_locked_down(LOCKDOWN_DEV_MEM);
+	rc = security_locked_down(LOCKDOWN_DEV_MEM);
+	if (rc)
+		return rc;
+
+	if (iminor(inode) != DEVMEM_MINOR)
+		return 0;
+
+	/*
+	 * Use a unified address space to have a single point to manage
+	 * revocations when drivers want to take over a /dev/mem mapped
+	 * range.
+	 */
+	inode->i_mapping = devmem_inode->i_mapping;
+	filp->f_mapping = inode->i_mapping;
+
+	return 0;
 }
 
 #define zero_lseek	null_lseek
@@ -885,7 +941,7 @@ static const struct memdev {
 	fmode_t fmode;
 } devlist[] = {
 #ifdef CONFIG_DEVMEM
-	 [1] = { "mem", 0, &mem_fops, FMODE_UNSIGNED_OFFSET },
+	 [DEVMEM_MINOR] = { "mem", 0, &mem_fops, FMODE_UNSIGNED_OFFSET },
 #endif
 #ifdef CONFIG_DEVKMEM
 	 [2] = { "kmem", 0, &kmem_fops, FMODE_UNSIGNED_OFFSET },
@@ -939,6 +995,45 @@ static char *mem_devnode(struct device *dev, umode_t *mode)
 
 static struct class *mem_class;
 
+static int devmem_fs_init_fs_context(struct fs_context *fc)
+{
+	return init_pseudo(fc, DEVMEM_MAGIC) ? 0 : -ENOMEM;
+}
+
+static struct file_system_type devmem_fs_type = {
+	.name		= "devmem",
+	.owner		= THIS_MODULE,
+	.init_fs_context = devmem_fs_init_fs_context,
+	.kill_sb	= kill_anon_super,
+};
+
+static int devmem_init_inode(void)
+{
+	static struct vfsmount *devmem_vfs_mount;
+	static int devmem_fs_cnt;
+	struct inode *inode;
+	int rc;
+
+	rc = simple_pin_fs(&devmem_fs_type, &devmem_vfs_mount, &devmem_fs_cnt);
+	if (rc < 0) {
+		pr_err("Cannot mount /dev/mem pseudo filesystem: %d\n", rc);
+		return rc;
+	}
+
+	inode = alloc_anon_inode(devmem_vfs_mount->mnt_sb);
+	if (IS_ERR(inode)) {
+		rc = PTR_ERR(inode);
+		pr_err("Cannot allocate inode for /dev/mem: %d\n", rc);
+		simple_release_fs(&devmem_vfs_mount, &devmem_fs_cnt);
+		return rc;
+	}
+
+	/* publish /dev/mem initialized */
+	WRITE_ONCE(devmem_inode, inode);
+
+	return 0;
+}
+
 static int __init chr_dev_init(void)
 {
 	int minor;
@@ -960,6 +1055,8 @@ static int __init chr_dev_init(void)
 		 */
 		if ((minor == DEVPORT_MINOR) && !arch_has_dev_port())
 			continue;
+		if ((minor == DEVMEM_MINOR) && devmem_init_inode() != 0)
+			continue;
 
 		device_create(mem_class, NULL, MKDEV(MEM_MAJOR, minor),
 			      NULL, devlist[minor].name);
include/linux/ioport.h +6 -0
index 7bddddfc76d6a..fdc201d614607 100644
@@ -300,5 +300,11 @@ struct resource *devm_request_free_mem_region(struct device *dev,
 struct resource *request_free_mem_region(struct resource *base,
 		unsigned long size, const char *name);
 
+#ifdef CONFIG_IO_STRICT_DEVMEM
+void revoke_devmem(struct resource *res);
+#else
+static inline void revoke_devmem(struct resource *res) { };
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif	/* _LINUX_IOPORT_H */
include/uapi/linux/magic.h +1 -0
index 903cc2d2750b2..84ae605c06431 100644
@@ -93,6 +93,7 @@
 #define BALLOON_KVM_MAGIC	0x13661366
 #define ZSMALLOC_MAGIC		0x58295829
 #define DMA_BUF_MAGIC		0x444d4142	/* "DMAB" */
+#define DEVMEM_MAGIC		0x454d444d	/* "DMEM" */
 #define Z3FOLD_MAGIC		0x33
 
 #endif /* __LINUX_MAGIC_H__ */
kernel/resource.c +5 -0
index 76036a41143b9..841737bbda9e5 100644
@@ -1126,6 +1126,7 @@ struct resource * __request_region(struct resource *parent,
 {
 	DECLARE_WAITQUEUE(wait, current);
 	struct resource *res = alloc_resource(GFP_KERNEL);
+	struct resource *orig_parent = parent;
 
 	if (!res)
 		return NULL;
@@ -1176,6 +1177,10 @@ struct resource * __request_region(struct resource *parent,
 		break;
 	}
 	write_unlock(&resource_lock);
+
+	if (res && orig_parent == &iomem_resource)
+		revoke_devmem(res);
+
 	return res;
 }
 EXPORT_SYMBOL(__request_region);
Signature · 1 line
2.25.1
author maintainer
#197 lore raw

PATCH 197/314 net: sunrpc: Fix off-by-one issues in rpc_ntop6

In reply to Greg Kroah-Hartman

From: Fedor Tokarev <[email protected]>

[ Upstream commit 118917d696dc59fd3e1741012c2f9db2294bed6f ]

Fix off-by-one issues in 'rpc_ntop6':
- 'snprintf' returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, a return value of 'sizeof(scopebuf)' means that the last character was dropped.
- 'strcat' adds a terminating null byte to the string, thus if len == buflen, the null byte is written past the end of the buffer.

---
 net/sunrpc/addr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/sunrpc/addr.c +2 -2
index d024af4be85e8..105d17af4abcc 100644
@@ -82,11 +82,11 @@ static size_t rpc_ntop6(const struct sockaddr *sap,
 
 	rc = snprintf(scopebuf, sizeof(scopebuf), "%c%u",
 			IPV6_SCOPE_DELIMITER, sin6->sin6_scope_id);
-	if (unlikely((size_t)rc > sizeof(scopebuf)))
+	if (unlikely((size_t)rc >= sizeof(scopebuf)))
 		return 0;
 
 	len += rc;
-	if (unlikely(len > buflen))
+	if (unlikely(len >= buflen))
 		return 0;
 
 	strcat(buf, scopebuf);
Signature · 1 line
2.25.1
author maintainer
#198 lore raw

PATCH 198/314 NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION

In reply to Greg Kroah-Hartman

From: Olga Kornievskaia <[email protected]>

[ Upstream commit 1c709b766e73e54d64b1dde1b7cfbcf25bcb15b9 ]

Fixes 02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback")
---
 fs/nfs/nfs4proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nfs/nfs4proc.c +1 -1
index e257653f25abd..33c17c69aeaa3 100644
@@ -7870,7 +7870,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata)
 }
 
 static const struct rpc_call_ops nfs4_bind_one_conn_to_session_ops = {
-	.rpc_call_done =  &nfs4_bind_one_conn_to_session_done,
+	.rpc_call_done =  nfs4_bind_one_conn_to_session_done,
 };
 
 /*
Signature · 1 line
2.25.1
author maintainer
#199 lore raw

PATCH 199/314 of: Fix a refcounting bug in __of_attach_node_sysfs()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ]

The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up.

Fixes 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs")
---
 drivers/of/kobj.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/of/kobj.c +1 -2
index c72eef9880417..a32e60b024b8d 100644
@@ -134,8 +134,6 @@ int __of_attach_node_sysfs(struct device_node *np)
 	if (!name)
 		return -ENOMEM;
 
-	of_node_get(np);
-
 	rc = kobject_add(&np->kobj, parent, "%s", name);
 	kfree(name);
 	if (rc)
@@ -144,6 +142,7 @@ int __of_attach_node_sysfs(struct device_node *np)
 	for_each_property_of_node(np, pp)
 		__of_add_property_sysfs(np, pp);
 
+	of_node_get(np);
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#200 lore raw

PATCH 200/314 input: i8042 - Remove special PowerPC handling

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ]

This causes a build error with CONFIG_WALNUT because kb_cs and kb_data were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc").

ld.lld: error: undefined symbol: kb_cs

Quoted 6 lines

referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a

ld.lld: error: undefined symbol: kb_data

Quoted 7 lines

referenced by i8042.c:309 (drivers/input/serio/i8042.c:309) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042.c:319 (drivers/input/serio/i8042.c:319) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced 15 more times

Presumably since nobody has noticed this for the last 12 years, there is not anyone actually trying to use this driver so we can just remove this special walnut code and use the generic header so it builds for all configurations.

---
 drivers/input/serio/i8042-ppcio.h | 57 -------------------------------
 drivers/input/serio/i8042.h       |  2 --
 2 files changed, 59 deletions(-)
 delete mode 100644 drivers/input/serio/i8042-ppcio.h
drivers/input/serio/i8042-ppcio.h deleted +0 -57
deleted file mode 100644
index 391f94d9e47da..0000000000000
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef _I8042_PPCIO_H
-#define _I8042_PPCIO_H
-
-
-#if defined(CONFIG_WALNUT)
-
-#define I8042_KBD_IRQ 25
-#define I8042_AUX_IRQ 26
-
-#define I8042_KBD_PHYS_DESC "walnutps2/serio0"
-#define I8042_AUX_PHYS_DESC "walnutps2/serio1"
-#define I8042_MUX_PHYS_DESC "walnutps2/serio%d"
-
-extern void *kb_cs;
-extern void *kb_data;
-
-#define I8042_COMMAND_REG (*(int *)kb_cs)
-#define I8042_DATA_REG (*(int *)kb_data)
-
-static inline int i8042_read_data(void)
-{
-	return readb(kb_data);
-}
-
-static inline int i8042_read_status(void)
-{
-	return readb(kb_cs);
-}
-
-static inline void i8042_write_data(int val)
-{
-	writeb(val, kb_data);
-}
-
-static inline void i8042_write_command(int val)
-{
-	writeb(val, kb_cs);
-}
-
-static inline int i8042_platform_init(void)
-{
-	i8042_reset = I8042_RESET_ALWAYS;
-	return 0;
-}
-
-static inline void i8042_platform_exit(void)
-{
-}
-
-#else
-
-#include "i8042-io.h"
-
-#endif
-
-#endif /* _I8042_PPCIO_H */
drivers/input/serio/i8042.h +0 -2
index 38dc27ad3c18f..eb376700dfffd 100644
@@ -17,8 +17,6 @@
 #include "i8042-ip22io.h"
 #elif defined(CONFIG_SNI_RM)
 #include "i8042-snirm.h"
-#elif defined(CONFIG_PPC)
-#include "i8042-ppcio.h"
 #elif defined(CONFIG_SPARC)
 #include "i8042-sparcio.h"
 #elif defined(CONFIG_X86) || defined(CONFIG_IA64)
Signature · 1 line
2.25.1
author maintainer
#201 lore raw

PATCH 201/314 powerpc/4xx: Dont unmap NULL mbase

In reply to Greg Kroah-Hartman

From: huhai <[email protected]>

[ Upstream commit bcec081ecc940fc38730b29c743bbee661164161 ]

---
 arch/powerpc/platforms/4xx/pci.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
arch/powerpc/platforms/4xx/pci.c +1 -3
index e6e2adcc7b64c..c13d64c3b0194 100644
@@ -1242,7 +1242,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
 	if (mbase == NULL) {
 		printk(KERN_ERR "%pOF: Can't map internal config space !",
 			port->node);
-		goto done;
+		return;
 	}
 
 	while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
@@ -1252,9 +1252,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
 	}
 	if (attempt)
 		port->link = 1;
-done:
 	iounmap(mbase);
-
 }
 
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
Signature · 1 line
2.25.1
author maintainer
#202 lore raw

PATCH 202/314 extcon: adc-jack: Fix an error handling path in adc_jack_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit bc84cff2c92ae5ccb2c37da73756e7174b1b430f ]

In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'.

This can be achieved easily by using the devm_ variant of 'iio_channel_get()'.

This has the extra benefit to simplify the remove function.

Fixes 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices")
---
 drivers/extcon/extcon-adc-jack.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/extcon/extcon-adc-jack.c +1 -2
index ad02dc6747a43..0317b614b6805 100644
@@ -124,7 +124,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
-	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
+	data->chan = devm_iio_channel_get(&pdev->dev, pdata->consumer_channel);
 	if (IS_ERR(data->chan))
 		return PTR_ERR(data->chan);
 
@@ -164,7 +164,6 @@ static int adc_jack_remove(struct platform_device *pdev)
 
 	free_irq(data->irq, data);
 	cancel_work_sync(&data->handler.work);
-	iio_channel_release(data->chan);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#203 lore raw

PATCH 203/314 ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed

In reply to Greg Kroah-Hartman

From: Xiyu Yang <[email protected]>

[ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ]

fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt.

The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak.

Fix this issue by calling dma_release_channel() when config DMA channel failed.

---
 sound/soc/fsl/fsl_asrc_dma.c | 1 +
 1 file changed, 1 insertion(+)
sound/soc/fsl/fsl_asrc_dma.c +1 -0
index 01052a0808b0b..5aee6b8366d27 100644
@@ -241,6 +241,7 @@ static int fsl_asrc_dma_hw_params(struct snd_pcm_substream *substream,
 	ret = dmaengine_slave_config(pair->dma_chan[dir], &config_be);
 	if (ret) {
 		dev_err(dev, "failed to config DMA channel for Back-End\n");
+		dma_release_channel(pair->dma_chan[dir]);
 		return ret;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#204 lore raw

PATCH 204/314 vfio/mdev: Fix reference count leak in add_mdev_supported_type

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit aa8ba13cae3134b8ef1c1b6879f66372531da738 ]

kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Thus, replace kfree() by kobject_put() to fix this issue. Previous commit "b8eb718348b8" fixed a similar problem.

Fixes 7b96953bc640 ("vfio: Mediated device Core driver")
---
 drivers/vfio/mdev/mdev_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/vfio/mdev/mdev_sysfs.c +1 -1
index 7570c7602ab40..f32c582611eb6 100644
@@ -110,7 +110,7 @@ static struct mdev_type *add_mdev_supported_type(struct mdev_parent *parent,
 				   "%s-%s", dev_driver_string(parent->dev),
 				   group->name);
 	if (ret) {
-		kfree(type);
+		kobject_put(&type->kobj);
 		return ERR_PTR(ret);
 	}
 
Signature · 1 line
2.25.1
author maintainer
#205 lore raw

PATCH 205/314 rtc: rv3028: Add missed check for devm_regmap_init_i2c()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit c3b29bf6f166f6ed5f04f9c125477358e0e25df8 ]

rv3028_probe() misses a check for devm_regmap_init_i2c(). Add the missed check to fix it.

---
 drivers/rtc/rtc-rv3028.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/rtc/rtc-rv3028.c +2 -0
index 2b316661a5782..bbdfebd706442 100644
@@ -625,6 +625,8 @@ static int rv3028_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	rv3028->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(rv3028->regmap))
+		return PTR_ERR(rv3028->regmap);
 
 	i2c_set_clientdata(client, rv3028);
 
Signature · 1 line
2.25.1
author maintainer
#206 lore raw

PATCH 206/314 mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit 445aeeb569f8d7904f8cf80b7c6826bb651ef80e ]

In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). So we should check whether the return value of devm_ioremap() is NULL instead of IS_ERR.

Fixes 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
---
 drivers/mailbox/zynqmp-ipi-mailbox.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
drivers/mailbox/zynqmp-ipi-mailbox.c +8 -12
index 86887c9a349a0..f9cc674ba9b76 100644
@@ -504,10 +504,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox,
 		mchan->req_buf_size = resource_size(&res);
 		mchan->req_buf = devm_ioremap(mdev, res.start,
 					      mchan->req_buf_size);
-		if (IS_ERR(mchan->req_buf)) {
+		if (!mchan->req_buf) {
 			dev_err(mdev, "Unable to map IPI buffer I/O memory\n");
-			ret = PTR_ERR(mchan->req_buf);
-			return ret;
+			return -ENOMEM;
 		}
 	} else if (ret != -ENODEV) {
 		dev_err(mdev, "Unmatched resource %s, %d.\n", name, ret);
@@ -520,10 +519,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox,
 		mchan->resp_buf_size = resource_size(&res);
 		mchan->resp_buf = devm_ioremap(mdev, res.start,
 					       mchan->resp_buf_size);
-		if (IS_ERR(mchan->resp_buf)) {
+		if (!mchan->resp_buf) {
 			dev_err(mdev, "Unable to map IPI buffer I/O memory\n");
-			ret = PTR_ERR(mchan->resp_buf);
-			return ret;
+			return -ENOMEM;
 		}
 	} else if (ret != -ENODEV) {
 		dev_err(mdev, "Unmatched resource %s.\n", name);
@@ -543,10 +541,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox,
 		mchan->req_buf_size = resource_size(&res);
 		mchan->req_buf = devm_ioremap(mdev, res.start,
 					      mchan->req_buf_size);
-		if (IS_ERR(mchan->req_buf)) {
+		if (!mchan->req_buf) {
 			dev_err(mdev, "Unable to map IPI buffer I/O memory\n");
-			ret = PTR_ERR(mchan->req_buf);
-			return ret;
+			return -ENOMEM;
 		}
 	} else if (ret != -ENODEV) {
 		dev_err(mdev, "Unmatched resource %s.\n", name);
@@ -559,10 +556,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox,
 		mchan->resp_buf_size = resource_size(&res);
 		mchan->resp_buf = devm_ioremap(mdev, res.start,
 					       mchan->resp_buf_size);
-		if (IS_ERR(mchan->resp_buf)) {
+		if (!mchan->resp_buf) {
 			dev_err(mdev, "Unable to map IPI buffer I/O memory\n");
-			ret = PTR_ERR(mchan->resp_buf);
-			return ret;
+			return -ENOMEM;
 		}
 	} else if (ret != -ENODEV) {
 		dev_err(mdev, "Unmatched resource %s.\n", name);
Signature · 1 line
2.25.1
author maintainer
#207 lore raw

PATCH 207/314 rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 32f71aa497cfb23d37149c2ef16ad71fce2e45e2 ]

The user ID value isn't actually much use - and leaks a kernel pointer or a userspace value - so replace it with the call debug ID, which appears in trace points.

---
 net/rxrpc/proc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/rxrpc/proc.c +3 -3
index 8b179e3c802a1..543afd9bd6642 100644
@@ -68,7 +68,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v)
 			 "Proto Local                                          "
 			 " Remote                                         "
 			 " SvID ConnID   CallID   End Use State    Abort   "
-			 " UserID           TxSeq    TW RxSeq    RW RxSerial RxTimo\n");
+			 " DebugId  TxSeq    TW RxSeq    RW RxSerial RxTimo\n");
 		return 0;
 	}
 
@@ -100,7 +100,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v)
 	rx_hard_ack = READ_ONCE(call->rx_hard_ack);
 	seq_printf(seq,
 		   "UDP   %-47.47s %-47.47s %4x %08x %08x %s %3u"
-		   " %-8.8s %08x %lx %08x %02x %08x %02x %08x %06lx\n",
+		   " %-8.8s %08x %08x %08x %02x %08x %02x %08x %06lx\n",
 		   lbuff,
 		   rbuff,
 		   call->service_id,
@@ -110,7 +110,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v)
 		   atomic_read(&call->usage),
 		   rxrpc_call_states[call->state],
 		   call->abort_code,
-		   call->user_call_ID,
+		   call->debug_id,
 		   tx_hard_ack, READ_ONCE(call->tx_top) - tx_hard_ack,
 		   rx_hard_ack, READ_ONCE(call->rx_top) - rx_hard_ack,
 		   call->rx_serial,
Signature · 1 line
2.25.1
author maintainer
#208 lore raw

PATCH 208/314 openrisc: Fix issue with argument clobbering for clone/fork

In reply to Greg Kroah-Hartman

From: Stafford Horne <[email protected]>

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ]

Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around.

This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove.

---
 arch/openrisc/kernel/entry.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/openrisc/kernel/entry.S +2 -2
index e4a78571f8833..c6481cfc5220f 100644
@@ -1166,13 +1166,13 @@ ENTRY(__sys_clone)
 	l.movhi	r29,hi(sys_clone)
 	l.ori	r29,r29,lo(sys_clone)
 	l.j	_fork_save_extra_regs_and_call
-	 l.addi	r7,r1,0
+	 l.nop
 
 ENTRY(__sys_fork)
 	l.movhi	r29,hi(sys_fork)
 	l.ori	r29,r29,lo(sys_fork)
 	l.j	_fork_save_extra_regs_and_call
-	 l.addi	r3,r1,0
+	 l.nop
 
 ENTRY(sys_rt_sigreturn)
 	l.jal	_sys_rt_sigreturn
Signature · 1 line
2.25.1
author maintainer
#209 lore raw

PATCH 209/314 drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection

In reply to Greg Kroah-Hartman

From: Ben Skeggs <[email protected]>

[ Upstream commit a1ef8bad506e4ffa0c57ac5f8cb99ab5cbc3b1fc ]

This is a SOR register, and not indexed by the bound head.

Fixes display not coming up on high-bandwidth HDMI displays under a number of configurations.

---
 drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c +2 -2
index 9b16a08eb4d9f..bf6d41fb0c9fe 100644
@@ -27,10 +27,10 @@ void
 gm200_hdmi_scdc(struct nvkm_ior *ior, int head, u8 scdc)
 {
 	struct nvkm_device *device = ior->disp->engine.subdev.device;
-	const u32 hoff = head * 0x800;
+	const u32 soff = nv50_ior_base(ior);
 	const u32 ctrl = scdc & 0x3;
 
-	nvkm_mask(device, 0x61c5bc + hoff, 0x00000003, ctrl);
+	nvkm_mask(device, 0x61c5bc + soff, 0x00000003, ctrl);
 
 	ior->tmds.high_speed = !!(scdc & 0x2);
 }
Signature · 1 line
2.25.1
author maintainer
#210 lore raw

PATCH 210/314 ceph: dont return -ESTALE if theres still an open file

In reply to Greg Kroah-Hartman

From: Luis Henriques <[email protected]>

[ Upstream commit 878dabb64117406abd40977b87544d05bb3031fc ]

Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing:

- name_to_handle_at("/cephfs/myfile")
- open("/cephfs/myfile")
- unlink("/cephfs/myfile")
- sync; sync;
- drop caches
- open_by_handle_at()

The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1.

This patch also makes sure we have LINK caps before checking i_nlink.

---
 fs/ceph/export.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
fs/ceph/export.c +8 -1
index 79dc06881e78e..e088843a7734c 100644
@@ -172,9 +172,16 @@ struct inode *ceph_lookup_inode(struct super_block *sb, u64 ino)
 static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino)
 {
 	struct inode *inode = __lookup_inode(sb, ino);
+	int err;
+
 	if (IS_ERR(inode))
 		return ERR_CAST(inode);
-	if (inode->i_nlink == 0) {
+	/* We need LINK caps to reliably check i_nlink */
+	err = ceph_do_getattr(inode, CEPH_CAP_LINK_SHARED, false);
+	if (err)
+		return ERR_PTR(err);
+	/* -ESTALE if inode as been unlinked and no file is open */
+	if ((inode->i_nlink == 0) && (atomic_read(&inode->i_count) == 1)) {
 		iput(inode);
 		return ERR_PTR(-ESTALE);
 	}
Signature · 1 line
2.25.1
author maintainer
#211 lore raw

PATCH 211/314 nfsd4: make drc_slab global, not per-net

In reply to Greg Kroah-Hartman

From: J. Bruce Fields <[email protected]>

[ Upstream commit 027690c75e8fd91b60a634d31c4891a6e39d45bd ]

I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far.

The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning:

[   45.163710] Unable to find swap-space signature
[   45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap.  This is not supported.
[   46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program
[   51.011723]
[   51.013378] ======================================================
[   51.013875] WARNING: possible circular locking dependency detected
[   51.014378] 5.2.0-rc2 #1 Not tainted
[   51.014672] ------------------------------------------------------
[   51.015182] trinity-c2/886 is trying to acquire lock:
[   51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130
[   51.016190]
[   51.016190] but task is already holding lock:
[   51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
[   51.017266]
[   51.017266] which lock already depends on the new lock.
[   51.017266]
[   51.017909]
[   51.017909] the existing dependency chain (in reverse order) is:
[   51.018497]
[   51.018497] -> #1 (kn->count#43){++++}:
[   51.018956]        __lock_acquire+0x7cf/0x1a20
[   51.019317]        lock_acquire+0x17d/0x390
[   51.019658]        __kernfs_remove+0x892/0xae0
[   51.020020]        kernfs_remove_by_name_ns+0x78/0x110
[   51.020435]        sysfs_remove_link+0x55/0xb0
[   51.020832]        sysfs_slab_add+0xc1/0x3e0
[   51.021332]        __kmem_cache_create+0x155/0x200
[   51.021720]        create_cache+0xf5/0x320
[   51.022054]        kmem_cache_create_usercopy+0x179/0x320
[   51.022486]        kmem_cache_create+0x1a/0x30
[   51.022867]        nfsd_reply_cache_init+0x278/0x560
[   51.023266]        nfsd_init_net+0x20f/0x5e0
[   51.023623]        ops_init+0xcb/0x4b0
[   51.023928]        setup_net+0x2fe/0x670
[   51.024315]        copy_net_ns+0x30a/0x3f0
[   51.024653]        create_new_namespaces+0x3c5/0x820
[   51.025257]        unshare_nsproxy_namespaces+0xd1/0x240
[   51.025881]        ksys_unshare+0x506/0x9c0
[   51.026381]        __x64_sys_unshare+0x3a/0x50
[   51.026937]        do_syscall_64+0x110/0x10b0
[   51.027509]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   51.028175]
[   51.028175] -> #0 (slab_mutex){+.+.}:
[   51.028817]        validate_chain+0x1c51/0x2cc0
[   51.029422]        __lock_acquire+0x7cf/0x1a20
[   51.029947]        lock_acquire+0x17d/0x390
[   51.030438]        __mutex_lock+0x100/0xfa0
[   51.030995]        mutex_lock_nested+0x27/0x30
[   51.031516]        slab_attr_store+0xa2/0x130
[   51.032020]        sysfs_kf_write+0x11d/0x180
[   51.032529]        kernfs_fop_write+0x32a/0x500
[   51.033056]        do_loop_readv_writev+0x21d/0x310
[   51.033627]        do_iter_write+0x2e5/0x380
[   51.034148]        vfs_writev+0x170/0x310
[   51.034616]        do_pwritev+0x13e/0x160
[   51.035100]        __x64_sys_pwritev+0xa3/0x110
[   51.035633]        do_syscall_64+0x110/0x10b0
[   51.036200]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   51.036924]
[   51.036924] other info that might help us debug this:
[   51.036924]
[   51.037876]  Possible unsafe locking scenario:
[   51.037876]
[   51.038556]        CPU0                    CPU1
[   51.039130]        ----                    ----
[   51.039676]   lock(kn->count#43);
[   51.040084]                                lock(slab_mutex);
[   51.040597]                                lock(kn->count#43);
[   51.041062]   lock(slab_mutex);
[   51.041320]
[   51.041320]  *** DEADLOCK ***
[   51.041320]
[   51.041793] 3 locks held by trinity-c2/886:
[   51.042128]  #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310
[   51.042739]  #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500
[   51.043400]  #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
Fixes 3ba75830ce17 "drc containerization"
---
 fs/nfsd/cache.h    |  2 ++
 fs/nfsd/netns.h    |  1 -
 fs/nfsd/nfscache.c | 29 +++++++++++++++++------------
 fs/nfsd/nfsctl.c   |  6 ++++++
 4 files changed, 25 insertions(+), 13 deletions(-)
fs/nfsd/cache.h +2 -0
index 10ec5ecdf1178..65c331f75e9c7 100644
@@ -78,6 +78,8 @@ enum {
 /* Checksum this amount of the request */
 #define RC_CSUMLEN		(256U)
 
+int	nfsd_drc_slab_create(void);
+void	nfsd_drc_slab_free(void);
 int	nfsd_reply_cache_init(struct nfsd_net *);
 void	nfsd_reply_cache_shutdown(struct nfsd_net *);
 int	nfsd_cache_lookup(struct svc_rqst *);
fs/nfsd/netns.h +0 -1
index 9a4ef815fb8c1..ed53e206a2996 100644
@@ -139,7 +139,6 @@ struct nfsd_net {
 	 * Duplicate reply cache
 	 */
 	struct nfsd_drc_bucket   *drc_hashtbl;
-	struct kmem_cache        *drc_slab;
 
 	/* max number of entries allowed in the cache */
 	unsigned int             max_drc_entries;
fs/nfsd/nfscache.c +17 -12
index 96352ab7bd810..0c10bfea039eb 100644
@@ -36,6 +36,8 @@ struct nfsd_drc_bucket {
 	spinlock_t cache_lock;
 };
 
+static struct kmem_cache	*drc_slab;
+
 static int	nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *vec);
 static unsigned long nfsd_reply_cache_count(struct shrinker *shrink,
 					    struct shrink_control *sc);
@@ -95,7 +97,7 @@ nfsd_reply_cache_alloc(struct svc_rqst *rqstp, __wsum csum,
 {
 	struct svc_cacherep	*rp;
 
-	rp = kmem_cache_alloc(nn->drc_slab, GFP_KERNEL);
+	rp = kmem_cache_alloc(drc_slab, GFP_KERNEL);
 	if (rp) {
 		rp->c_state = RC_UNUSED;
 		rp->c_type = RC_NOCACHE;
@@ -129,7 +131,7 @@ nfsd_reply_cache_free_locked(struct nfsd_drc_bucket *b, struct svc_cacherep *rp,
 		atomic_dec(&nn->num_drc_entries);
 		nn->drc_mem_usage -= sizeof(*rp);
 	}
-	kmem_cache_free(nn->drc_slab, rp);
+	kmem_cache_free(drc_slab, rp);
 }
 
 static void
@@ -141,6 +143,18 @@ nfsd_reply_cache_free(struct nfsd_drc_bucket *b, struct svc_cacherep *rp,
 	spin_unlock(&b->cache_lock);
 }
 
+int nfsd_drc_slab_create(void)
+{
+	drc_slab = kmem_cache_create("nfsd_drc",
+				sizeof(struct svc_cacherep), 0, 0, NULL);
+	return drc_slab ? 0: -ENOMEM;
+}
+
+void nfsd_drc_slab_free(void)
+{
+	kmem_cache_destroy(drc_slab);
+}
+
 int nfsd_reply_cache_init(struct nfsd_net *nn)
 {
 	unsigned int hashsize;
@@ -159,18 +173,13 @@ int nfsd_reply_cache_init(struct nfsd_net *nn)
 	if (status)
 		goto out_nomem;
 
-	nn->drc_slab = kmem_cache_create("nfsd_drc",
-				sizeof(struct svc_cacherep), 0, 0, NULL);
-	if (!nn->drc_slab)
-		goto out_shrinker;
-
 	nn->drc_hashtbl = kcalloc(hashsize,
 				sizeof(*nn->drc_hashtbl), GFP_KERNEL);
 	if (!nn->drc_hashtbl) {
 		nn->drc_hashtbl = vzalloc(array_size(hashsize,
 						 sizeof(*nn->drc_hashtbl)));
 		if (!nn->drc_hashtbl)
-			goto out_slab;
+			goto out_shrinker;
 	}
 
 	for (i = 0; i < hashsize; i++) {
@@ -180,8 +189,6 @@ int nfsd_reply_cache_init(struct nfsd_net *nn)
 	nn->drc_hashsize = hashsize;
 
 	return 0;
-out_slab:
-	kmem_cache_destroy(nn->drc_slab);
 out_shrinker:
 	unregister_shrinker(&nn->nfsd_reply_cache_shrinker);
 out_nomem:
@@ -209,8 +216,6 @@ void nfsd_reply_cache_shutdown(struct nfsd_net *nn)
 	nn->drc_hashtbl = NULL;
 	nn->drc_hashsize = 0;
 
-	kmem_cache_destroy(nn->drc_slab);
-	nn->drc_slab = NULL;
 }
 
 /*
fs/nfsd/nfsctl.c +6 -0
index d77c5261c03cb..159feae6af8ba 100644
@@ -1534,6 +1534,9 @@ static int __init init_nfsd(void)
 		goto out_free_slabs;
 	nfsd_fault_inject_init(); /* nfsd fault injection controls */
 	nfsd_stat_init();	/* Statistics */
+	retval = nfsd_drc_slab_create();
+	if (retval)
+		goto out_free_stat;
 	nfsd_lockd_init();	/* lockd->nfsd callbacks */
 	retval = create_proc_exports_entry();
 	if (retval)
@@ -1547,6 +1550,8 @@ out_free_all:
 	remove_proc_entry("fs/nfs", NULL);
 out_free_lockd:
 	nfsd_lockd_shutdown();
+	nfsd_drc_slab_free();
+out_free_stat:
 	nfsd_stat_shutdown();
 	nfsd_fault_inject_cleanup();
 	nfsd4_exit_pnfs();
@@ -1561,6 +1566,7 @@ out_unregister_pernet:
 
 static void __exit exit_nfsd(void)
 {
+	nfsd_drc_slab_free();
 	remove_proc_entry("fs/nfs/exports", NULL);
 	remove_proc_entry("fs/nfs", NULL);
 	nfsd_stat_shutdown();
Signature · 1 line
2.25.1
author maintainer
#212 lore raw

PATCH 212/314 gfs2: Allow lock_nolock mount to specify jid=X

In reply to Greg Kroah-Hartman

From: Bob Peterson <[email protected]>

[ Upstream commit ea22eee4e6027d8927099de344f7fff43c507ef9 ]

Before this patch, a simple typo accidentally added \n to the jid= string for lock_nolock mounts. This made it impossible to mount a gfs2 file system with a journal other than journal0. Thus:

mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>

Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>

In most cases this is not a problem. However, for debugging and testing purposes we sometimes want to test the integrity of other journals. This patch removes the unnecessary \n and thus allows lock_nolock users to specify an alternate journal.

---
 fs/gfs2/ops_fstype.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/gfs2/ops_fstype.c +1 -1
index 18daf494abab9..c26c864590cc3 100644
@@ -911,7 +911,7 @@ fail:
 }
 
 static const match_table_t nolock_tokens = {
-	{ Opt_jid, "jid=%d\n", },
+	{ Opt_jid, "jid=%d", },
 	{ Opt_err, NULL },
 };
 
Signature · 1 line
2.25.1
author maintainer
#213 lore raw

PATCH 213/314 scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 0267ffce562c8bbf9b57ebe0e38445ad04972890 ]

kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.

---
 drivers/scsi/iscsi_boot_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/iscsi_boot_sysfs.c +1 -1
index e4857b7280338..a64abe38db2d4 100644
@@ -352,7 +352,7 @@ iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
 	boot_kobj->kobj.kset = boot_kset->kset;
 	if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype,
 				 NULL, name, index)) {
-		kfree(boot_kobj);
+		kobject_put(&boot_kobj->kobj);
 		return NULL;
 	}
 	boot_kobj->data = data;
Signature · 1 line
2.25.1
author maintainer
#214 lore raw

PATCH 214/314 scsi: ufs: Dont update urgent bkops level when toggling auto bkops

In reply to Greg Kroah-Hartman

From: Can Guo <[email protected]>

[ Upstream commit be32acff43800c87dc5c707f5d47cc607b76b653 ]

Urgent bkops level is used to compare against actual bkops status read from UFS device. Urgent bkops level is set during initialization and might be updated in exception event handler during runtime. But it should not be updated to the actual bkops status every time when auto bkops is toggled. Otherwise, if urgent bkops level is updated to 0, auto bkops shall always be kept enabled.

Fixes 24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled")
---
 drivers/scsi/ufs/ufshcd.c | 1 -
 1 file changed, 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +0 -1
index bc73181b0405a..2b6853c7375c9 100644
@@ -5101,7 +5101,6 @@ static int ufshcd_bkops_ctrl(struct ufs_hba *hba,
 		err = ufshcd_enable_auto_bkops(hba);
 	else
 		err = ufshcd_disable_auto_bkops(hba);
-	hba->urgent_bkops_lvl = curr_status;
 out:
 	return err;
 }
Signature · 1 line
2.25.1
author maintainer
#215 lore raw

PATCH 215/314 pinctrl: imxl: Fix an error handling path in imx1_pinctrl_core_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 9eb728321286c4b31e964d2377fca2368526d408 ]

When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()', an error handling path has not been updated.

Axe a now unneeded 'pinctrl_unregister()'.

Fixes e55e025d1687 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration")
---
 drivers/pinctrl/freescale/pinctrl-imx1-core.c | 1 -
 1 file changed, 1 deletion(-)
drivers/pinctrl/freescale/pinctrl-imx1-core.c +0 -1
index 7e29e3fecdb24..5bb183c0ce310 100644
@@ -638,7 +638,6 @@ int imx1_pinctrl_core_probe(struct platform_device *pdev,
 
 	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
 	if (ret) {
-		pinctrl_unregister(ipctl->pctl);
 		dev_err(&pdev->dev, "Failed to populate subdevices\n");
 		return ret;
 	}
Signature · 1 line
2.25.1
author maintainer
#216 lore raw

PATCH 216/314 pinctrl: freescale: imx: Fix an error handling path in imx_pinctrl_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 11d8da5cabf7c6c3263ba2cd9c00260395867048 ]

'pinctrl_unregister()' should not be called to undo 'devm_pinctrl_register_and_init()', it is already handled by the framework.

This simplifies the error handling paths of the probe function. The 'imx_free_resources()' can be removed as well.

Fixes a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions")
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)
drivers/pinctrl/freescale/pinctrl-imx.c +2 -17
index 9f42036c5fbb8..1f81569c7ae3b 100644
@@ -774,16 +774,6 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev,
 	return 0;
 }
 
-/*
- * imx_free_resources() - free memory used by this driver
- * @info: info driver instance
- */
-static void imx_free_resources(struct imx_pinctrl *ipctl)
-{
-	if (ipctl->pctl)
-		pinctrl_unregister(ipctl->pctl);
-}
-
 int imx_pinctrl_probe(struct platform_device *pdev,
 		      const struct imx_pinctrl_soc_info *info)
 {
@@ -874,23 +864,18 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 					     &ipctl->pctl);
 	if (ret) {
 		dev_err(&pdev->dev, "could not register IMX pinctrl driver\n");
-		goto free;
+		return ret;
 	}
 
 	ret = imx_pinctrl_probe_dt(pdev, ipctl);
 	if (ret) {
 		dev_err(&pdev->dev, "fail to probe dt properties\n");
-		goto free;
+		return ret;
 	}
 
 	dev_info(&pdev->dev, "initialized IMX pinctrl driver\n");
 
 	return pinctrl_enable(ipctl->pctl);
-
-free:
-	imx_free_resources(ipctl);
-
-	return ret;
 }
 
 static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
Signature · 1 line
2.25.1
author maintainer
#217 lore raw

PATCH 217/314 pinctrl: freescale: imx: Use devm_of_iomap() to avoid a resource leak in case of error in imx_pinctrl_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit ba403242615c2c99e27af7984b1650771a2cc2c9 ]

Use 'devm_of_iomap()' instead 'of_iomap()' to avoid a resource leak in case of error.

Update the error handling code accordingly.

Fixes 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/pinctrl/freescale/pinctrl-imx.c +4 -3
index 1f81569c7ae3b..cb7e0f08d2cf4 100644
@@ -824,12 +824,13 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 				return -EINVAL;
 			}
 
-			ipctl->input_sel_base = of_iomap(np, 0);
+			ipctl->input_sel_base = devm_of_iomap(&pdev->dev, np,
+							      0, NULL);
 			of_node_put(np);
-			if (!ipctl->input_sel_base) {
+			if (IS_ERR(ipctl->input_sel_base)) {
 				dev_err(&pdev->dev,
 					"iomuxc input select base address not found\n");
-				return -ENOMEM;
+				return PTR_ERR(ipctl->input_sel_base);
 			}
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#218 lore raw

PATCH 218/314 nfsd: safer handling of corrupted c_type

In reply to Greg Kroah-Hartman

From: J. Bruce Fields <[email protected]>

[ Upstream commit c25bf185e57213b54ea0d632ac04907310993433 ]

This can only happen if there's a bug somewhere, so let's make it a WARN not a printk. Also, I think it's safest to ignore the corruption rather than trying to fix it by removing a cache entry.

---
 fs/nfsd/nfscache.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/nfsd/nfscache.c +1 -2
index 0c10bfea039eb..4a258065188e1 100644
@@ -469,8 +469,7 @@ found_entry:
 		rtn = RC_REPLY;
 		break;
 	default:
-		printk(KERN_WARNING "nfsd: bad repcache type %d\n", rp->c_type);
-		nfsd_reply_cache_free_locked(b, rp, nn);
+		WARN_ONCE(1, "nfsd: bad repcache type %d\n", rp->c_type);
 	}
 
 	goto out;
Signature · 1 line
2.25.1
author maintainer
#219 lore raw

PATCH 219/314 drm/amd/display: Revalidate bandwidth before commiting DC updates

In reply to Greg Kroah-Hartman

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit a24eaa5c51255b344d5a321f1eeb3205f2775498 ]

[Why]
Whenever we switch between tiled formats without also switching pixel formats or doing anything else that recreates the DC plane state we can run into underflow or hangs since we're not updating the DML parameters before committing to the hardware.

[How]
If the update type is FULL then call validate_bandwidth again to update the DML parmeters before committing the state.

This is basically just a workaround and protective measure against update types being added DC where we could run into this issue in the future.

We can only fully validate the state in advance before applying it to the hardware if we recreate all the plane and stream states since we can't modify what's currently in use.

The next step is to update DM to ensure that we're creating the plane and stream states for whatever could potentially be a full update in DC to pre-emptively recreate the state for DC global validation.

The workaround can stay until this has been fixed in DM.

---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc.c +6 -0
index 2028dc017f7a0..b95a58aa82d91 100644
@@ -2230,6 +2230,12 @@ void dc_commit_updates_for_stream(struct dc *dc,
 
 	copy_stream_update_to_stream(dc, context, stream, stream_update);
 
+	if (!dc->res_pool->funcs->validate_bandwidth(dc, context, false)) {
+		DC_ERROR("Mode validation failed for stream update!\n");
+		dc_release_state(context);
+		return;
+	}
+
 	commit_planes_for_stream(
 				dc,
 				srf_updates,
Signature · 1 line
2.25.1
author maintainer
#220 lore raw

PATCH 220/314 crypto: omap-sham - add proper load balancing support for multicore

In reply to Greg Kroah-Hartman

From: Tero Kristo <[email protected]>

[ Upstream commit 281c377872ff5d15d80df25fc4df02d2676c7cde ]

The current implementation of the multiple accelerator core support for OMAP SHA does not work properly. It always picks up the first probed accelerator core if this is available, and rest of the book keeping also gets confused if there are two cores available. Add proper load balancing support for SHA, and also fix any bugs related to the multicore support while doing it.

---
 drivers/crypto/omap-sham.c | 64 ++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 33 deletions(-)
drivers/crypto/omap-sham.c +31 -33
index ac80bc6af0930..aba5db3c0588f 100644
@@ -165,8 +165,6 @@ struct omap_sham_hmac_ctx {
 };
 
 struct omap_sham_ctx {
-	struct omap_sham_dev	*dd;
-
 	unsigned long		flags;
 
 	/* fallback stuff */
@@ -918,27 +916,35 @@ static int omap_sham_update_dma_stop(struct omap_sham_dev *dd)
 	return 0;
 }
 
+struct omap_sham_dev *omap_sham_find_dev(struct omap_sham_reqctx *ctx)
+{
+	struct omap_sham_dev *dd;
+
+	if (ctx->dd)
+		return ctx->dd;
+
+	spin_lock_bh(&sham.lock);
+	dd = list_first_entry(&sham.dev_list, struct omap_sham_dev, list);
+	list_move_tail(&dd->list, &sham.dev_list);
+	ctx->dd = dd;
+	spin_unlock_bh(&sham.lock);
+
+	return dd;
+}
+
 static int omap_sham_init(struct ahash_request *req)
 {
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct omap_sham_ctx *tctx = crypto_ahash_ctx(tfm);
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
-	struct omap_sham_dev *dd = NULL, *tmp;
+	struct omap_sham_dev *dd;
 	int bs = 0;
 
-	spin_lock_bh(&sham.lock);
-	if (!tctx->dd) {
-		list_for_each_entry(tmp, &sham.dev_list, list) {
-			dd = tmp;
-			break;
-		}
-		tctx->dd = dd;
-	} else {
-		dd = tctx->dd;
-	}
-	spin_unlock_bh(&sham.lock);
+	ctx->dd = NULL;
 
-	ctx->dd = dd;
+	dd = omap_sham_find_dev(ctx);
+	if (!dd)
+		return -ENODEV;
 
 	ctx->flags = 0;
 
@@ -1187,8 +1193,7 @@ err1:
 static int omap_sham_enqueue(struct ahash_request *req, unsigned int op)
 {
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
-	struct omap_sham_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
-	struct omap_sham_dev *dd = tctx->dd;
+	struct omap_sham_dev *dd = ctx->dd;
 
 	ctx->op = op;
 
@@ -1198,7 +1203,7 @@ static int omap_sham_enqueue(struct ahash_request *req, unsigned int op)
 static int omap_sham_update(struct ahash_request *req)
 {
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(req);
-	struct omap_sham_dev *dd = ctx->dd;
+	struct omap_sham_dev *dd = omap_sham_find_dev(ctx);
 
 	if (!req->nbytes)
 		return 0;
@@ -1302,21 +1307,8 @@ static int omap_sham_setkey(struct crypto_ahash *tfm, const u8 *key,
 	struct omap_sham_hmac_ctx *bctx = tctx->base;
 	int bs = crypto_shash_blocksize(bctx->shash);
 	int ds = crypto_shash_digestsize(bctx->shash);
-	struct omap_sham_dev *dd = NULL, *tmp;
 	int err, i;
 
-	spin_lock_bh(&sham.lock);
-	if (!tctx->dd) {
-		list_for_each_entry(tmp, &sham.dev_list, list) {
-			dd = tmp;
-			break;
-		}
-		tctx->dd = dd;
-	} else {
-		dd = tctx->dd;
-	}
-	spin_unlock_bh(&sham.lock);
-
 	err = crypto_shash_setkey(tctx->fallback, key, keylen);
 	if (err)
 		return err;
@@ -1334,7 +1326,7 @@ static int omap_sham_setkey(struct crypto_ahash *tfm, const u8 *key,
 
 	memset(bctx->ipad + keylen, 0, bs - keylen);
 
-	if (!test_bit(FLAGS_AUTO_XOR, &dd->flags)) {
+	if (!test_bit(FLAGS_AUTO_XOR, &sham.flags)) {
 		memcpy(bctx->opad, bctx->ipad, bs);
 
 		for (i = 0; i < bs; i++) {
@@ -2136,6 +2128,7 @@ static int omap_sham_probe(struct platform_device *pdev)
 	}
 
 	dd->flags |= dd->pdata->flags;
+	sham.flags |= dd->pdata->flags;
 
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, DEFAULT_AUTOSUSPEND_DELAY);
@@ -2163,6 +2156,9 @@ static int omap_sham_probe(struct platform_device *pdev)
 	spin_unlock(&sham.lock);
 
 	for (i = 0; i < dd->pdata->algs_info_size; i++) {
+		if (dd->pdata->algs_info[i].registered)
+			break;
+
 		for (j = 0; j < dd->pdata->algs_info[i].size; j++) {
 			struct ahash_alg *alg;
 
@@ -2214,9 +2210,11 @@ static int omap_sham_remove(struct platform_device *pdev)
 	list_del(&dd->list);
 	spin_unlock(&sham.lock);
 	for (i = dd->pdata->algs_info_size - 1; i >= 0; i--)
-		for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--)
+		for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--) {
 			crypto_unregister_ahash(
 					&dd->pdata->algs_info[i].algs_list[j]);
+			dd->pdata->algs_info[i].registered--;
+		}
 	tasklet_kill(&dd->done_task);
 	pm_runtime_disable(&pdev->dev);
 
Signature · 1 line
2.25.1
author maintainer
#221 lore raw

PATCH 221/314 geneve: change from tx_error to tx_dropped on missing metadata

In reply to Greg Kroah-Hartman

From: Jiri Benc <[email protected]>

[ Upstream commit 9d149045b3c0e44c049cdbce8a64e19415290017 ]

If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected.

However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping.

The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none.

Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less.

---
 drivers/net/geneve.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/geneve.c +4 -3
index aa101f72d4055..cac75c7d1d018 100644
@@ -987,9 +987,10 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (geneve->collect_md) {
 		info = skb_tunnel_info(skb);
 		if (unlikely(!info || !(info->mode & IP_TUNNEL_INFO_TX))) {
-			err = -EINVAL;
 			netdev_dbg(dev, "no tunnel metadata\n");
-			goto tx_error;
+			dev_kfree_skb(skb);
+			dev->stats.tx_dropped++;
+			return NETDEV_TX_OK;
 		}
 	} else {
 		info = &geneve->info;
@@ -1006,7 +1007,7 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (likely(!err))
 		return NETDEV_TX_OK;
-tx_error:
+
 	dev_kfree_skb(skb);
 
 	if (err == -ELOOP)
Signature · 1 line
2.25.1
author maintainer
#222 lore raw

PATCH 222/314 lib/zlib: remove outdated and incorrect pre-increment optimization

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

[ Upstream commit acaab7335bd6f0c0b54ce3a00bd7f18222ce0f5f ]

The zlib inflate code has an old micro-optimization based on the assumption that for pre-increment memory accesses, the compiler will generate code that fits better into the processor's pipeline than what would be generated for post-increment memory accesses.

This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/9aaec95e8211

This optimization causes UB according to C99, which says in section 6.5.6 "Additive operators": "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined".

This UB is not only a theoretical concern, but can also cause trouble for future work on compiler-based sanitizers.

According to the zlib commit, this optimization also is not optimal anymore with modern compilers.

Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the POSTINC case, and remove the macro definitions, just like in the upstream patch.

---
 lib/zlib_inflate/inffast.c | 91 +++++++++++++++-----------------------
 1 file changed, 35 insertions(+), 56 deletions(-)
lib/zlib_inflate/inffast.c +35 -56
index 2c13ecc5bb2c7..ed1f3df272602 100644
@@ -10,17 +10,6 @@
 
 #ifndef ASMINF
 
-/* Allow machine dependent optimization for post-increment or pre-increment.
-   Based on testing to date,
-   Pre-increment preferred for:
-   - PowerPC G3 (Adler)
-   - MIPS R5000 (Randers-Pehrson)
-   Post-increment preferred for:
-   - none
-   No measurable difference:
-   - Pentium III (Anderson)
-   - M68060 (Nikl)
- */
 union uu {
 	unsigned short us;
 	unsigned char b[2];
@@ -38,16 +27,6 @@ get_unaligned16(const unsigned short *p)
 	return mm.us;
 }
 
-#ifdef POSTINC
-#  define OFF 0
-#  define PUP(a) *(a)++
-#  define UP_UNALIGNED(a) get_unaligned16((a)++)
-#else
-#  define OFF 1
-#  define PUP(a) *++(a)
-#  define UP_UNALIGNED(a) get_unaligned16(++(a))
-#endif
-
 /*
    Decode literal, length, and distance codes and write out the resulting
    literal and match bytes until either not enough input or output is
@@ -115,9 +94,9 @@ void inflate_fast(z_streamp strm, unsigned start)
 
     /* copy state to local variables */
     state = (struct inflate_state *)strm->state;
-    in = strm->next_in - OFF;
+    in = strm->next_in;
     last = in + (strm->avail_in - 5);
-    out = strm->next_out - OFF;
+    out = strm->next_out;
     beg = out - (start - strm->avail_out);
     end = out + (strm->avail_out - 257);
 #ifdef INFLATE_STRICT
@@ -138,9 +117,9 @@ void inflate_fast(z_streamp strm, unsigned start)
        input data or output space */
     do {
         if (bits < 15) {
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
         }
         this = lcode[hold & lmask];
@@ -150,14 +129,14 @@ void inflate_fast(z_streamp strm, unsigned start)
         bits -= op;
         op = (unsigned)(this.op);
         if (op == 0) {                          /* literal */
-            PUP(out) = (unsigned char)(this.val);
+            *out++ = (unsigned char)(this.val);
         }
         else if (op & 16) {                     /* length base */
             len = (unsigned)(this.val);
             op &= 15;                           /* number of extra bits */
             if (op) {
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                 }
                 len += (unsigned)hold & ((1U << op) - 1);
@@ -165,9 +144,9 @@ void inflate_fast(z_streamp strm, unsigned start)
                 bits -= op;
             }
             if (bits < 15) {
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
             }
             this = dcode[hold & dmask];
@@ -180,10 +159,10 @@ void inflate_fast(z_streamp strm, unsigned start)
                 dist = (unsigned)(this.val);
                 op &= 15;                       /* number of extra bits */
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                     if (bits < op) {
-                        hold += (unsigned long)(PUP(in)) << bits;
+                        hold += (unsigned long)(*in++) << bits;
                         bits += 8;
                     }
                 }
@@ -205,13 +184,13 @@ void inflate_fast(z_streamp strm, unsigned start)
                         state->mode = BAD;
                         break;
                     }
-                    from = window - OFF;
+                    from = window;
                     if (write == 0) {           /* very common case */
                         from += wsize - op;
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
@@ -222,14 +201,14 @@ void inflate_fast(z_streamp strm, unsigned start)
                         if (op < len) {         /* some from end of window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
-                            from = window - OFF;
+                            from = window;
                             if (write < len) {  /* some from start of window */
                                 op = write;
                                 len -= op;
                                 do {
-                                    PUP(out) = PUP(from);
+                                    *out++ = *from++;
                                 } while (--op);
                                 from = out - dist;      /* rest from output */
                             }
@@ -240,21 +219,21 @@ void inflate_fast(z_streamp strm, unsigned start)
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
                     }
                     while (len > 2) {
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
                         len -= 3;
                     }
                     if (len) {
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
                         if (len > 1)
-                            PUP(out) = PUP(from);
+                            *out++ = *from++;
                     }
                 }
                 else {
@@ -264,29 +243,29 @@ void inflate_fast(z_streamp strm, unsigned start)
                     from = out - dist;          /* copy direct from output */
 		    /* minimum length is three */
 		    /* Align out addr */
-		    if (!((long)(out - 1 + OFF) & 1)) {
-			PUP(out) = PUP(from);
+		    if (!((long)(out - 1) & 1)) {
+			*out++ = *from++;
 			len--;
 		    }
-		    sout = (unsigned short *)(out - OFF);
+		    sout = (unsigned short *)(out);
 		    if (dist > 2) {
 			unsigned short *sfrom;
 
-			sfrom = (unsigned short *)(from - OFF);
+			sfrom = (unsigned short *)(from);
 			loops = len >> 1;
 			do
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-			    PUP(sout) = PUP(sfrom);
+			    *sout++ = *sfrom++;
 #else
-			    PUP(sout) = UP_UNALIGNED(sfrom);
+			    *sout++ = get_unaligned16(sfrom++);
 #endif
 			while (--loops);
-			out = (unsigned char *)sout + OFF;
-			from = (unsigned char *)sfrom + OFF;
+			out = (unsigned char *)sout;
+			from = (unsigned char *)sfrom;
 		    } else { /* dist == 1 or dist == 2 */
 			unsigned short pat16;
 
-			pat16 = *(sout-1+OFF);
+			pat16 = *(sout-1);
 			if (dist == 1) {
 				union uu mm;
 				/* copy one char pattern to both bytes */
@@ -296,12 +275,12 @@ void inflate_fast(z_streamp strm, unsigned start)
 			}
 			loops = len >> 1;
 			do
-			    PUP(sout) = pat16;
+			    *sout++ = pat16;
 			while (--loops);
-			out = (unsigned char *)sout + OFF;
+			out = (unsigned char *)sout;
 		    }
 		    if (len & 1)
-			PUP(out) = PUP(from);
+			*out++ = *from++;
                 }
             }
             else if ((op & 64) == 0) {          /* 2nd level distance code */
@@ -336,8 +315,8 @@ void inflate_fast(z_streamp strm, unsigned start)
     hold &= (1U << bits) - 1;
 
     /* update state and return */
-    strm->next_in = in + OFF;
-    strm->next_out = out + OFF;
+    strm->next_in = in;
+    strm->next_out = out;
     strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
     strm->avail_out = (unsigned)(out < end ?
                                  257 + (end - out) : 257 - (out - end));
Signature · 1 line
2.25.1
author maintainer
#223 lore raw

PATCH 223/314 include/linux/bitops.h: avoid clang shift-count-overflow warnings

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit bd93f003b7462ae39a43c531abca37fe7073b866 ]

Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets:

  include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
          return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
                                                 ^~~~~~~~~~~~
  include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64'
   define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
                                                  ^~~~~~~~~~~~~~~~~~~~
  include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64'
   define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
                                                                             ^  ~~
  include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32'
   define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
                                                  ^
  include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16'
   define __const_hweight16(w) (__const_hweight8(w)  + __const_hweight8((w)  >> 8 ))
                                                                         ^
  include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8'
            (!!((w) & (1ULL << 2))) +     \

Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output.

---
 include/linux/bitops.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/bitops.h +1 -1
index c94a9ff9f082e..4f0e62cbf2ffe 100644
@@ -57,7 +57,7 @@ static inline int get_bitmask_order(unsigned int count)
 
 static __always_inline unsigned long hweight_long(unsigned long w)
 {
-	return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
+	return sizeof(w) == 4 ? hweight32(w) : hweight64((__u64)w);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#224 lore raw

PATCH 224/314 selftests/vm/pkeys: fix alloc_random_pkey() to make it really random

In reply to Greg Kroah-Hartman

From: Ram Pai <[email protected]>

[ Upstream commit 6e373263ce07eeaa6410843179535fbdf561fc31 ]

alloc_random_pkey() was allocating the same pkey every time. Not all pkeys were geting tested. This fixes it.

---
 tools/testing/selftests/x86/protection_keys.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/testing/selftests/x86/protection_keys.c +2 -1
index 480995bceefa5..47191af466174 100644
@@ -24,6 +24,7 @@
 #define _GNU_SOURCE
 #include <errno.h>
 #include <linux/futex.h>
+#include <time.h>
 #include <sys/time.h>
 #include <sys/syscall.h>
 #include <string.h>
@@ -612,10 +613,10 @@ int alloc_random_pkey(void)
 	int nr_alloced = 0;
 	int random_index;
 	memset(alloced_pkeys, 0, sizeof(alloced_pkeys));
+	srand((unsigned int)time(NULL));
 
 	/* allocate every possible key and make a note of which ones we got */
 	max_nr_pkey_allocs = NR_PKEYS;
-	max_nr_pkey_allocs = 1;
 	for (i = 0; i < max_nr_pkey_allocs; i++) {
 		int new_pkey = alloc_pkey();
 		if (new_pkey < 0)
Signature · 1 line
2.25.1
author maintainer
#225 lore raw

PATCH 225/314 blktrace: use errno instead of bi_status

In reply to Greg Kroah-Hartman

From: Chaitanya Kulkarni <[email protected]>

[ Upstream commit 48bc3cd3e07a1486f45d9971c75d6090976c3b1b ]

In blk_add_trace_spliti() blk_add_trace_bio_remap() use blk_status_to_errno() to pass the error instead of pasing the bi_status. This fixes the sparse warning.

---
 kernel/trace/blktrace.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
kernel/trace/blktrace.c +6 -3
index e7e483cdbea61..9e02e1ce0ac01 100644
@@ -999,8 +999,10 @@ static void blk_add_trace_split(void *ignore,
 
 		__blk_add_trace(bt, bio->bi_iter.bi_sector,
 				bio->bi_iter.bi_size, bio_op(bio), bio->bi_opf,
-				BLK_TA_SPLIT, bio->bi_status, sizeof(rpdu),
-				&rpdu, blk_trace_bio_get_cgid(q, bio));
+				BLK_TA_SPLIT,
+				blk_status_to_errno(bio->bi_status),
+				sizeof(rpdu), &rpdu,
+				blk_trace_bio_get_cgid(q, bio));
 	}
 	rcu_read_unlock();
 }
@@ -1037,7 +1039,8 @@ static void blk_add_trace_bio_remap(void *ignore,
 	r.sector_from = cpu_to_be64(from);
 
 	__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size,
-			bio_op(bio), bio->bi_opf, BLK_TA_REMAP, bio->bi_status,
+			bio_op(bio), bio->bi_opf, BLK_TA_REMAP,
+			blk_status_to_errno(bio->bi_status),
 			sizeof(r), &r, blk_trace_bio_get_cgid(q, bio));
 	rcu_read_unlock();
 }
Signature · 1 line
2.25.1
author maintainer
#226 lore raw

PATCH 226/314 blktrace: fix endianness in get_pdu_int()

In reply to Greg Kroah-Hartman

From: Chaitanya Kulkarni <[email protected]>

[ Upstream commit 71df3fd82e7cccec7b749a8607a4662d9f7febdd ]

In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning.

---
 kernel/trace/blktrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/blktrace.c +1 -1
index 9e02e1ce0ac01..23e5f86c99215 100644
@@ -1262,7 +1262,7 @@ static inline __u16 t_error(const struct trace_entry *ent)
 
 static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg)
 {
-	const __u64 *val = pdu_start(ent, has_cg);
+	const __be64 *val = pdu_start(ent, has_cg);
 	return be64_to_cpu(*val);
 }
 
Signature · 1 line
2.25.1
author maintainer
#227 lore raw

PATCH 227/314 blktrace: fix endianness for blk_log_remap()

In reply to Greg Kroah-Hartman

From: Chaitanya Kulkarni <[email protected]>

[ Upstream commit 5aec598c456fe3c1b71a1202cbb42bdc2a643277 ]

The function blk_log_remap() can be simplified by removing the call to get_pdu_remap() that copies the values into extra variable to print the data, which also fixes the endiannness warning reported by sparse.

---
 kernel/trace/blktrace.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
kernel/trace/blktrace.c +4 -15
index 23e5f86c99215..a677aa84ccb6e 100644
@@ -1266,17 +1266,6 @@ static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg)
 	return be64_to_cpu(*val);
 }
 
-static void get_pdu_remap(const struct trace_entry *ent,
-			  struct blk_io_trace_remap *r, bool has_cg)
-{
-	const struct blk_io_trace_remap *__r = pdu_start(ent, has_cg);
-	__u64 sector_from = __r->sector_from;
-
-	r->device_from = be32_to_cpu(__r->device_from);
-	r->device_to   = be32_to_cpu(__r->device_to);
-	r->sector_from = be64_to_cpu(sector_from);
-}
-
 typedef void (blk_log_action_t) (struct trace_iterator *iter, const char *act,
 	bool has_cg);
 
@@ -1402,13 +1391,13 @@ static void blk_log_with_error(struct trace_seq *s,
 
 static void blk_log_remap(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
 {
-	struct blk_io_trace_remap r = { .device_from = 0, };
+	const struct blk_io_trace_remap *__r = pdu_start(ent, has_cg);
 
-	get_pdu_remap(ent, &r, has_cg);
 	trace_seq_printf(s, "%llu + %u <- (%d,%d) %llu\n",
 			 t_sector(ent), t_sec(ent),
-			 MAJOR(r.device_from), MINOR(r.device_from),
-			 (unsigned long long)r.sector_from);
+			 MAJOR(be32_to_cpu(__r->device_from)),
+			 MINOR(be32_to_cpu(__r->device_from)),
+			 be64_to_cpu(__r->sector_from));
 }
 
 static void blk_log_plug(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
Signature · 1 line
2.25.1
author maintainer
#228 lore raw

PATCH 228/314 gfs2: fix use-after-free on transaction ail lists

In reply to Greg Kroah-Hartman

From: Bob Peterson <[email protected]>

[ Upstream commit 83d060ca8d90fa1e3feac227f995c013100862d3 ]

Before this patch, transactions could be merged into the system transaction by function gfs2_merge_trans(), but the transaction ail lists were never merged. Because the ail flushing mechanism can run separately, bd elements can be attached to the transaction's buffer list during the transaction (trans_add_meta, etc) but quickly moved to its ail lists. Later, in function gfs2_trans_end, the transaction can be freed (by gfs2_trans_end) while it still has bd elements queued to its ail lists, which can cause it to either lose track of the bd elements altogether (memory leak) or worse, reference the bd elements after the parent transaction has been freed.

Although I've not seen any serious consequences, the problem becomes apparent with the previous patch's addition of:

	gfs2_assert_warn(sdp, list_empty(&tr->tr_ail1_list));

to function gfs2_trans_free().

This patch adds logic into gfs2_merge_trans() to move the merged transaction's ail lists to the sdp transaction. This prevents the use-after-free. To do this properly, we need to hold the ail lock, so we pass sdp into the function instead of the transaction itself.

---
 fs/gfs2/log.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
fs/gfs2/log.c +9 -2
index 110e5c4db8192..a4b6a49462a41 100644
@@ -881,8 +881,10 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags)
  * @new: New transaction to be merged
  */
 
-static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new)
+static void gfs2_merge_trans(struct gfs2_sbd *sdp, struct gfs2_trans *new)
 {
+	struct gfs2_trans *old = sdp->sd_log_tr;
+
 	WARN_ON_ONCE(!test_bit(TR_ATTACHED, &old->tr_flags));
 
 	old->tr_num_buf_new	+= new->tr_num_buf_new;
@@ -893,6 +895,11 @@ static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new)
 
 	list_splice_tail_init(&new->tr_databuf, &old->tr_databuf);
 	list_splice_tail_init(&new->tr_buf, &old->tr_buf);
+
+	spin_lock(&sdp->sd_ail_lock);
+	list_splice_tail_init(&new->tr_ail1_list, &old->tr_ail1_list);
+	list_splice_tail_init(&new->tr_ail2_list, &old->tr_ail2_list);
+	spin_unlock(&sdp->sd_ail_lock);
 }
 
 static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
@@ -904,7 +911,7 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	gfs2_log_lock(sdp);
 
 	if (sdp->sd_log_tr) {
-		gfs2_merge_trans(sdp->sd_log_tr, tr);
+		gfs2_merge_trans(sdp, tr);
 	} else if (tr->tr_num_buf_new || tr->tr_num_databuf_new) {
 		gfs2_assert_withdraw(sdp, test_bit(TR_ALLOCED, &tr->tr_flags));
 		sdp->sd_log_tr = tr;
Signature · 1 line
2.25.1
author maintainer
#229 lore raw

PATCH 229/314 net: marvell: Fix OF_MDIO config check

In reply to Greg Kroah-Hartman

From: Dan Murphy <[email protected]>

[ Upstream commit 5cd119d9a05f1c1a08778a7305b4ca0f16bc1e20 ]

When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module.

Fixes cf41a51db8985 ("of/phylib: Use device tree properties to initialize Marvell PHYs.")
---
 drivers/net/phy/marvell.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/marvell.c +1 -1
index a7796134e3be0..91cf1d1672637 100644
@@ -358,7 +358,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
 	return marvell_config_aneg(phydev);
 }
 
-#ifdef CONFIG_OF_MDIO
+#if IS_ENABLED(CONFIG_OF_MDIO)
 /* Set and/or override some configuration registers based on the
  * marvell,reg-init property stored in the of_node for the phydev.
  *
Signature · 1 line
2.25.1
author maintainer
#230 lore raw

PATCH 230/314 ntb_perf: pass correct struct device to dma_alloc_coherent

In reply to Greg Kroah-Hartman

From: Sanjay R Mehta <[email protected]>

[ Upstream commit 98f4e140264eeb52f22ff05be6b6dd48237255ac ]

Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead.

Fixes 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_perf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/ntb/test/ntb_perf.c +4 -4
index e9b7c2dfc7301..52c29791fc02a 100644
@@ -556,7 +556,7 @@ static void perf_free_inbuf(struct perf_peer *peer)
 		return;
 
 	(void)ntb_mw_clear_trans(peer->perf->ntb, peer->pidx, peer->gidx);
-	dma_free_coherent(&peer->perf->ntb->dev, peer->inbuf_size,
+	dma_free_coherent(&peer->perf->ntb->pdev->dev, peer->inbuf_size,
 			  peer->inbuf, peer->inbuf_xlat);
 	peer->inbuf = NULL;
 }
@@ -585,8 +585,9 @@ static int perf_setup_inbuf(struct perf_peer *peer)
 
 	perf_free_inbuf(peer);
 
-	peer->inbuf = dma_alloc_coherent(&perf->ntb->dev, peer->inbuf_size,
-					 &peer->inbuf_xlat, GFP_KERNEL);
+	peer->inbuf = dma_alloc_coherent(&perf->ntb->pdev->dev,
+					 peer->inbuf_size, &peer->inbuf_xlat,
+					 GFP_KERNEL);
 	if (!peer->inbuf) {
 		dev_err(&perf->ntb->dev, "Failed to alloc inbuf of %pa\n",
 			&peer->inbuf_size);
@@ -1517,4 +1518,3 @@ static void __exit perf_exit(void)
 	destroy_workqueue(perf_wq);
 }
 module_exit(perf_exit);
-
Signature · 1 line
2.25.1
author maintainer
#231 lore raw

PATCH 231/314 ntb_tool: pass correct struct device to dma_alloc_coherent

In reply to Greg Kroah-Hartman

From: Sanjay R Mehta <[email protected]>

[ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ]

Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead.

Fixes 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_tool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/ntb/test/ntb_tool.c +3 -3
index d592c0ffbd198..025747c1568ea 100644
@@ -590,7 +590,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
 	inmw->size = min_t(resource_size_t, req_size, size);
 	inmw->size = round_up(inmw->size, addr_align);
 	inmw->size = round_up(inmw->size, size_align);
-	inmw->mm_base = dma_alloc_coherent(&tc->ntb->dev, inmw->size,
+	inmw->mm_base = dma_alloc_coherent(&tc->ntb->pdev->dev, inmw->size,
 					   &inmw->dma_base, GFP_KERNEL);
 	if (!inmw->mm_base)
 		return -ENOMEM;
@@ -612,7 +612,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
 	return 0;
 
 err_free_dma:
-	dma_free_coherent(&tc->ntb->dev, inmw->size, inmw->mm_base,
+	dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base,
 			  inmw->dma_base);
 	inmw->mm_base = NULL;
 	inmw->dma_base = 0;
@@ -629,7 +629,7 @@ static void tool_free_mw(struct tool_ctx *tc, int pidx, int widx)
 
 	if (inmw->mm_base != NULL) {
 		ntb_mw_clear_trans(tc->ntb, pidx, widx);
-		dma_free_coherent(&tc->ntb->dev, inmw->size,
+		dma_free_coherent(&tc->ntb->pdev->dev, inmw->size,
 				  inmw->mm_base, inmw->dma_base);
 	}
 
Signature · 1 line
2.25.1
author maintainer
#232 lore raw

PATCH 232/314 NTB: ntb_tool: reading the link file should not end in a NULL byte

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 912e12813dd03c602e4922fc34709ec4d4380cf0 ]

When running ntb_test this warning is issued:

./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input

This is caused by the kernel returning one more byte than is necessary when reading the link file.

Reduce the number of bytes read back to 2 as it was before the commit that regressed this.

Fixes 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_tool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/ntb/test/ntb_tool.c +1 -2
index 025747c1568ea..311d6ab8d0160 100644
@@ -504,7 +504,7 @@ static ssize_t tool_peer_link_read(struct file *filep, char __user *ubuf,
 	buf[1] = '\n';
 	buf[2] = '\0';
 
-	return simple_read_from_buffer(ubuf, size, offp, buf, 3);
+	return simple_read_from_buffer(ubuf, size, offp, buf, 2);
 }
 
 static TOOL_FOPS_RDWR(tool_peer_link_fops,
@@ -1690,4 +1690,3 @@ static void __exit tool_exit(void)
 	debugfs_remove_recursive(tool_dbgfs_topdir);
 }
 module_exit(tool_exit);
-
Signature · 1 line
2.25.1
author maintainer
#233 lore raw

PATCH 233/314 NTB: Revert the change to use the NTB device dev for DMA allocations

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 40da7d9a93c8941737ef4a1208d32c13ce017fe1 ]

Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as:

DMAR: Allocating domain for 0000:02:00.1 failed

This is because the IOMMU has not setup the device for such use.

Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this.

Fixes 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
---
 drivers/ntb/core.c | 1 -
 1 file changed, 1 deletion(-)
drivers/ntb/core.c +0 -1
index c9a0912b175fa..f8f75a504a581 100644
@@ -311,4 +311,3 @@ static void __exit ntb_driver_exit(void)
 	bus_unregister(&ntb_bus);
 }
 module_exit(ntb_driver_exit);
-
Signature · 1 line
2.25.1
author maintainer
#234 lore raw

PATCH 234/314 NTB: perf: Dont require one more memory window than number of peers

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit a9c4211ac918ade1522aced6b5acfbe824722f7d ]

ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error.

Fixes 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_perf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ntb/test/ntb_perf.c +1 -1
index 52c29791fc02a..3817eadab2cf9 100644
@@ -653,7 +653,7 @@ static int perf_init_service(struct perf_ctx *perf)
 {
 	u64 mask;
 
-	if (ntb_peer_mw_count(perf->ntb) < perf->pcnt + 1) {
+	if (ntb_peer_mw_count(perf->ntb) < perf->pcnt) {
 		dev_err(&perf->ntb->dev, "Not enough memory windows\n");
 		return -EINVAL;
 	}
Signature · 1 line
2.25.1
author maintainer
#235 lore raw

PATCH 235/314 NTB: perf: Fix support for hardware that doesnt have port numbers

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ]

Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily.

Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer.

Fixes 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_perf.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/ntb/test/ntb_perf.c +10 -0
index 3817eadab2cf9..281170887ad06 100644
@@ -1423,6 +1423,16 @@ static int perf_init_peers(struct perf_ctx *perf)
 	if (perf->gidx == -1)
 		perf->gidx = pidx;
 
+	/*
+	 * Hardware with only two ports may not have unique port
+	 * numbers. In this case, the gidxs should all be zero.
+	 */
+	if (perf->pcnt == 1 &&  ntb_port_number(perf->ntb) == 0 &&
+	    ntb_peer_port_number(perf->ntb, 0) == 0) {
+		perf->gidx = 0;
+		perf->peers[0].gidx = 0;
+	}
+
 	for (pidx = 0; pidx < perf->pcnt; pidx++) {
 		ret = perf_setup_peer_mw(&perf->peers[pidx]);
 		if (ret)
Signature · 1 line
2.25.1
author maintainer
#236 lore raw

PATCH 236/314 NTB: perf: Fix race condition when run with ntb_test

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 34d8673a01b053b6231a995a4eec9341163d63be ]

When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly.

To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error.

Fixes 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
---
 drivers/ntb/test/ntb_perf.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/ntb/test/ntb_perf.c +8 -2
index 281170887ad06..5ce4766a6c9eb 100644
@@ -158,6 +158,8 @@ struct perf_peer {
 	/* NTB connection setup service */
 	struct work_struct	service;
 	unsigned long		sts;
+
+	struct completion init_comp;
 };
 #define to_peer_service(__work) \
 	container_of(__work, struct perf_peer, service)
@@ -546,6 +548,7 @@ static int perf_setup_outbuf(struct perf_peer *peer)
 
 	/* Initialization is finally done */
 	set_bit(PERF_STS_DONE, &peer->sts);
+	complete_all(&peer->init_comp);
 
 	return 0;
 }
@@ -637,6 +640,7 @@ static void perf_service_work(struct work_struct *work)
 		perf_setup_outbuf(peer);
 
 	if (test_and_clear_bit(PERF_CMD_CLEAR, &peer->sts)) {
+		init_completion(&peer->init_comp);
 		clear_bit(PERF_STS_DONE, &peer->sts);
 		if (test_bit(0, &peer->perf->busy_flag) &&
 		    peer == peer->perf->test_peer) {
@@ -1052,8 +1056,9 @@ static int perf_submit_test(struct perf_peer *peer)
 	struct perf_thread *pthr;
 	int tidx, ret;
 
-	if (!test_bit(PERF_STS_DONE, &peer->sts))
-		return -ENOLINK;
+	ret = wait_for_completion_interruptible(&peer->init_comp);
+	if (ret < 0)
+		return ret;
 
 	if (test_and_set_bit_lock(0, &perf->busy_flag))
 		return -EBUSY;
@@ -1419,6 +1424,7 @@ static int perf_init_peers(struct perf_ctx *perf)
 			peer->gidx = pidx;
 		}
 		INIT_WORK(&peer->service, perf_service_work);
+		init_completion(&peer->init_comp);
 	}
 	if (perf->gidx == -1)
 		perf->gidx = pidx;
Signature · 1 line
2.25.1
author maintainer
#237 lore raw

PATCH 237/314 NTB: ntb_test: Fix bug when counting remote files

In reply to Greg Kroah-Hartman

From: Logan Gunthorpe <[email protected]>

[ Upstream commit 2130c0ba69d69bb21f5c52787f2587db00d13d8a ]

When remote files are counted in get_files_count, without using SSH, the code returns 0 because there is a colon prepended to $LOC. $VPATH should have been used instead of $LOC.

Fixes 06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests")
---
 tools/testing/selftests/ntb/ntb_test.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/ntb/ntb_test.sh +1 -1
index 9c60337317c60..020137b614079 100755
@@ -241,7 +241,7 @@ function get_files_count()
 	split_remote $LOC
 
 	if [[ "$REMOTE" == "" ]]; then
-		echo $(ls -1 "$LOC"/${NAME}* 2>/dev/null | wc -l)
+		echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l)
 	else
 		echo $(ssh "$REMOTE" "ls -1 \"$VPATH\"/${NAME}* | \
 		       wc -l" 2> /dev/null)
Signature · 1 line
2.25.1
author maintainer
#238 lore raw

PATCH 238/314 i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n

In reply to Greg Kroah-Hartman

From: Max Staudt <[email protected]>

[ Upstream commit cdb555397f438592bab00599037c347b700cf397 ]

This has been found by the Kernel Test Robot:
http://lkml.iu.edu/hypermail/linux/kernel/2006.0/06862.html

With CONFIG_AMIGA_PCMCIA=n, io_mm.h does not pull in amigahw.h and ZTWO_VADDR is undefined. Add forgotten include to i2c-icy.c

Fixes 4768e90ecaec ("i2c: Add i2c-icy for I2C on m68k/Amiga")
---
 drivers/i2c/busses/i2c-icy.c | 1 +
 1 file changed, 1 insertion(+)
drivers/i2c/busses/i2c-icy.c +1 -0
index 8382eb64b4241..d6c17506dba4a 100644
@@ -43,6 +43,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pcf.h>
 
+#include <asm/amigahw.h>
 #include <asm/amigaints.h>
 #include <linux/zorro.h>
 
Signature · 1 line
2.25.1
author maintainer
#239 lore raw

PATCH 239/314 drivers/perf: hisi: Fix wrong value for all counters enable

In reply to Greg Kroah-Hartman

From: Shaokun Zhang <[email protected]>

[ Upstream commit 961abd78adcb4c72c343fcd9f9dc5e2ebbe9b448 ]

In L3C uncore PMU drivers, bit16 is used to control all counters enable & disable. Wrong value is given in the driver and its default value is 1'b1, it can work because each PMU counter has its own control bits too. Let's fix the wrong value.

Fixes 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Cc Will Deacon <[email protected]>
Cc Mark Rutland <[email protected]>
---
 drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +1 -1
index 078b8dc572503..c5b0950c2a7a9 100644
@@ -35,7 +35,7 @@
 /* L3C has 8-counters */
 #define L3C_NR_COUNTERS		0x8
 
-#define L3C_PERF_CTRL_EN	0x20000
+#define L3C_PERF_CTRL_EN	0x10000
 #define L3C_EVTYPE_NONE		0xff
 
 /*
Signature · 1 line
2.25.1
author maintainer
#240 lore raw

PATCH 240/314 selftests/net: in timestamping, strncpy needs to preserve null byte

In reply to Greg Kroah-Hartman

From: tannerlove <[email protected]>

[ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ]

If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this:

timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \
destination size [-Wstringop-truncation]
353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name));

Fixes cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
---
 .../selftests/networking/timestamping/timestamping.c   | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
tools/testing/selftests/networking/timestamping/timestamping.c +8 -2
index aca3491174a1e..f4bb4fef0f399 100644
@@ -313,10 +313,16 @@ int main(int argc, char **argv)
 	int val;
 	socklen_t len;
 	struct timeval next;
+	size_t if_len;
 
 	if (argc < 2)
 		usage(0);
 	interface = argv[1];
+	if_len = strlen(interface);
+	if (if_len >= IFNAMSIZ) {
+		printf("interface name exceeds IFNAMSIZ\n");
+		exit(1);
+	}
 
 	for (i = 2; i < argc; i++) {
 		if (!strcasecmp(argv[i], "SO_TIMESTAMP"))
@@ -350,12 +356,12 @@ int main(int argc, char **argv)
 		bail("socket");
 
 	memset(&device, 0, sizeof(device));
-	strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
+	memcpy(device.ifr_name, interface, if_len + 1);
 	if (ioctl(sock, SIOCGIFADDR, &device) < 0)
 		bail("getting interface IP address");
 
 	memset(&hwtstamp, 0, sizeof(hwtstamp));
-	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
+	memcpy(hwtstamp.ifr_name, interface, if_len + 1);
 	hwtstamp.ifr_data = (void *)&hwconfig;
 	memset(&hwconfig, 0, sizeof(hwconfig));
 	hwconfig.tx_type =
Signature · 1 line
2.25.1
author maintainer
#241 lore raw

PATCH 241/314 f2fs: dont return vmalloc() memory from f2fs_kmalloc()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit 0b6d4ca04a86b9dababbb76e58d33c437e127b77 ]

kmalloc() returns kmalloc'ed memory, and kvmalloc() returns either kmalloc'ed or vmalloc'ed memory. But the f2fs wrappers, f2fs_kmalloc() and f2fs_kvmalloc(), both return both kinds of memory.

It's redundant to have two functions that do the same thing, and also breaking the standard naming convention is causing bugs since people assume it's safe to kfree() memory allocated by f2fs_kmalloc(). See e.g. the various allocations in fs/f2fs/compress.c.

Fix this by making f2fs_kmalloc() just use kmalloc(). And to avoid re-introducing the allocation failures that the vmalloc fallback was intended to fix, convert the largest allocations to use f2fs_kvmalloc().

---
 fs/f2fs/checkpoint.c | 4 ++--
 fs/f2fs/f2fs.h       | 8 +-------
 fs/f2fs/node.c       | 8 ++++----
 fs/f2fs/super.c      | 2 +-
 4 files changed, 8 insertions(+), 14 deletions(-)
fs/f2fs/checkpoint.c +2 -2
index a28ffecc0f95a..bbd07fe8a4921 100644
@@ -892,8 +892,8 @@ int f2fs_get_valid_checkpoint(struct f2fs_sb_info *sbi)
 	int i;
 	int err;
 
-	sbi->ckpt = f2fs_kzalloc(sbi, array_size(blk_size, cp_blks),
-				 GFP_KERNEL);
+	sbi->ckpt = f2fs_kvzalloc(sbi, array_size(blk_size, cp_blks),
+				  GFP_KERNEL);
 	if (!sbi->ckpt)
 		return -ENOMEM;
 	/*
fs/f2fs/f2fs.h +1 -7
index a26ea1e6ba88f..c22ca7d867ee5 100644
@@ -2790,18 +2790,12 @@ static inline bool f2fs_may_extent_tree(struct inode *inode)
 static inline void *f2fs_kmalloc(struct f2fs_sb_info *sbi,
 					size_t size, gfp_t flags)
 {
-	void *ret;
-
 	if (time_to_inject(sbi, FAULT_KMALLOC)) {
 		f2fs_show_injection_info(FAULT_KMALLOC);
 		return NULL;
 	}
 
-	ret = kmalloc(size, flags);
-	if (ret)
-		return ret;
-
-	return kvmalloc(size, flags);
+	return kmalloc(size, flags);
 }
 
 static inline void *f2fs_kzalloc(struct f2fs_sb_info *sbi,
fs/f2fs/node.c +4 -4
index f14401a77d601..90a20bd129614 100644
@@ -2933,7 +2933,7 @@ static int __get_nat_bitmaps(struct f2fs_sb_info *sbi)
 		return 0;
 
 	nm_i->nat_bits_blocks = F2FS_BLK_ALIGN((nat_bits_bytes << 1) + 8);
-	nm_i->nat_bits = f2fs_kzalloc(sbi,
+	nm_i->nat_bits = f2fs_kvzalloc(sbi,
 			nm_i->nat_bits_blocks << F2FS_BLKSIZE_BITS, GFP_KERNEL);
 	if (!nm_i->nat_bits)
 		return -ENOMEM;
@@ -3066,9 +3066,9 @@ static int init_free_nid_cache(struct f2fs_sb_info *sbi)
 	int i;
 
 	nm_i->free_nid_bitmap =
-		f2fs_kzalloc(sbi, array_size(sizeof(unsigned char *),
-					     nm_i->nat_blocks),
-			     GFP_KERNEL);
+		f2fs_kvzalloc(sbi, array_size(sizeof(unsigned char *),
+					      nm_i->nat_blocks),
+			      GFP_KERNEL);
 	if (!nm_i->free_nid_bitmap)
 		return -ENOMEM;
 
fs/f2fs/super.c +1 -1
index d89c85177e092..f4b882ee48ddf 100644
@@ -2901,7 +2901,7 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)
 	if (nr_sectors & (bdev_zone_sectors(bdev) - 1))
 		FDEV(devi).nr_blkz++;
 
-	FDEV(devi).blkz_seq = f2fs_kzalloc(sbi,
+	FDEV(devi).blkz_seq = f2fs_kvzalloc(sbi,
 					BITS_TO_LONGS(FDEV(devi).nr_blkz)
 					* sizeof(unsigned long),
 					GFP_KERNEL);
Signature · 1 line
2.25.1
author maintainer
#242 lore raw

PATCH 242/314 afs: Fix memory leak in afs_put_sysnames()

In reply to Greg Kroah-Hartman

From: Zhihao Cheng <[email protected]>

[ Upstream commit 2ca068be09bf8e285036603823696140026dcbe7 ]

Fix afs_put_sysnames() to actually free the specified afs_sysnames object after its reference count has been decreased to zero and its contents have been released.

Fixes 6f8880d8e681557 ("afs: Implement @sys substitution handling")
---
 fs/afs/proc.c | 1 +
 1 file changed, 1 insertion(+)
fs/afs/proc.c +1 -0
index fba2ec3a3a9c9..106b27011f6d5 100644
@@ -562,6 +562,7 @@ void afs_put_sysnames(struct afs_sysnames *sysnames)
 			if (sysnames->subs[i] != afs_init_sysname &&
 			    sysnames->subs[i] != sysnames->blank)
 				kfree(sysnames->subs[i]);
+		kfree(sysnames);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#243 lore raw

PATCH 243/314 ASoC: core: only convert non DPCM link to DPCM link

In reply to Greg Kroah-Hartman

From: Bard Liao <[email protected]>

[ Upstream commit 607fa205a7e4dfad28b8a67ab1c985756ddbccb0 ]

Additional checks for valid DAIs expose a corner case, where existing BE dailinks get modified, e.g. HDMI links are tagged with dpcm_capture=1 even if the DAIs are for playback.

This patch makes those changes conditional and flags configuration issues when a BE dailink is has no_pcm=0 but dpcm_playback or dpcm_capture=1 (which makes no sense).

As discussed on the alsa-devel mailing list, there are redundant flags for dpcm_playback, dpcm_capture, playback_only, capture_only. This will have to be cleaned-up in a future update. For now only correct and flag problematic configurations.

---
 sound/soc/soc-core.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
sound/soc/soc-core.c +19 -3
index 0215e2c94bf08..9df20768a8f29 100644
@@ -1895,9 +1895,25 @@ match:
 			dai_link->platforms->name = component->name;
 
 			/* convert non BE into BE */
-			dai_link->no_pcm = 1;
-			dai_link->dpcm_playback = 1;
-			dai_link->dpcm_capture = 1;
+			if (!dai_link->no_pcm) {
+				dai_link->no_pcm = 1;
+
+				if (dai_link->dpcm_playback)
+					dev_warn(card->dev,
+						 "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_playback=1\n",
+						 dai_link->name);
+				if (dai_link->dpcm_capture)
+					dev_warn(card->dev,
+						 "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_capture=1\n",
+						 dai_link->name);
+
+				/* convert normal link into DPCM one */
+				if (!(dai_link->dpcm_playback ||
+				      dai_link->dpcm_capture)) {
+					dai_link->dpcm_playback = !dai_link->capture_only;
+					dai_link->dpcm_capture = !dai_link->playback_only;
+				}
+			}
 
 			/* override any BE fixups */
 			dai_link->be_hw_params_fixup =
Signature · 1 line
2.25.1
author maintainer
#244 lore raw

PATCH 244/314 ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags

In reply to Greg Kroah-Hartman

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit ba4e5abc6c4e173af7c941c03c067263b686665d ]

With additional checks on dailinks, we see errors such as

[ 3.000418] sof-nocodec sof-nocodec: CPU DAI DMIC01 Pin for rtd

NoCodec-6 does not support playback

It's not clear why we set the dpcm_playback and dpcm_capture flags unconditionally, add a check on number of channels for each direction to avoid invalid configurations.

---
 sound/soc/sof/nocodec.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
sound/soc/sof/nocodec.c +4 -2
index 3d128e5a132c0..ea0fe9a09f3f5 100644
@@ -52,8 +52,10 @@ static int sof_nocodec_bes_setup(struct device *dev,
 		links[i].platforms->name = dev_name(dev);
 		links[i].codecs->dai_name = "snd-soc-dummy-dai";
 		links[i].codecs->name = "snd-soc-dummy";
-		links[i].dpcm_playback = 1;
-		links[i].dpcm_capture = 1;
+		if (ops->drv[i].playback.channels_min)
+			links[i].dpcm_playback = 1;
+		if (ops->drv[i].capture.channels_min)
+			links[i].dpcm_capture = 1;
 	}
 
 	card->dai_link = links;
Signature · 1 line
2.25.1
author maintainer
#245 lore raw

PATCH 245/314 ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit 199a5e8fda54ab3c8c6f6bf980c004e97ebf5ccb ]

The Toshiba Encore WT10-A tablet almost fully works with the default settings for Bay Trail CR devices. The only issue is that it uses a digital mic. connected the the DMIC1 input instead of an analog mic.

Add a quirk for this model using the default settings with the input-map replaced with BYT_RT5640_DMIC1_MAP.

---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +12 -0
index f222e1091bae7..f7964d1ec486f 100644
@@ -754,6 +754,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_JD_NOT_INV |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Toshiba Encore WT10-A */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A-103"),
+		},
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
Signature · 1 line
2.25.1
author maintainer
#246 lore raw

PATCH 246/314 ASoC: rt5645: Add platform-data for Asus T101HA

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit 79d4f823a06796656289f97b922493da5690e46c ]

The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted.

Add a DMI quirk with the correct settings for this model.

---
 sound/soc/codecs/rt5645.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
sound/soc/codecs/rt5645.c +14 -0
index 19662ee330d6b..c83f7f5da96b7 100644
@@ -3625,6 +3625,12 @@ static const struct rt5645_platform_data asus_t100ha_platform_data = {
 	.inv_jd1_1 = true,
 };
 
+static const struct rt5645_platform_data asus_t101ha_platform_data = {
+	.dmic1_data_pin = RT5645_DMIC_DATA_IN2N,
+	.dmic2_data_pin = RT5645_DMIC2_DISABLE,
+	.jd_mode = 3,
+};
+
 static const struct rt5645_platform_data lenovo_ideapad_miix_310_pdata = {
 	.jd_mode = 3,
 	.in2_diff = true,
@@ -3702,6 +3708,14 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		},
 		.driver_data = (void *)&asus_t100ha_platform_data,
 	},
+	{
+		.ident = "ASUS T101HA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T101HA"),
+		},
+		.driver_data = (void *)&asus_t101ha_platform_data,
+	},
 	{
 		.ident = "MINIX Z83-4",
 		.matches = {
Signature · 1 line
2.25.1
author maintainer
#247 lore raw

PATCH 247/314 bpf/sockmap: Fix kernel panic at __tcp_bpf_recvmsg

In reply to Greg Kroah-Hartman

From: dihu <[email protected]>

[ Upstream commit 487082fb7bd2a32b66927d2b22e3a81b072b44f0 ]

When user application calls read() with MSG_PEEK flag to read data of bpf sockmap socket, kernel panic happens at __tcp_bpf_recvmsg+0x12c/0x350. sk_msg is not removed from ingress_msg queue after read out under MSG_PEEK flag is set. Because it's not judged whether sk_msg is the last msg of ingress_msg queue, the next sk_msg may be the head of ingress_msg queue, whose memory address of sg page is invalid. So it's necessary to add check codes to prevent this problem.

[20759.125457] BUG: kernel NULL pointer dereference, address:
0000000000000008
[20759.132118] CPU: 53 PID: 51378 Comm: envoy Tainted: G            E
5.4.32 #1
[20759.140890] Hardware name: Inspur SA5212M4/YZMB-00370-109, BIOS
4.1.12 06/18/2017
[20759.149734] RIP: 0010:copy_page_to_iter+0xad/0x300
[20759.270877] __tcp_bpf_recvmsg+0x12c/0x350
[20759.276099] tcp_bpf_recvmsg+0x113/0x370
[20759.281137] inet_recvmsg+0x55/0xc0
[20759.285734] __sys_recvfrom+0xc8/0x130
[20759.290566] ? __audit_syscall_entry+0x103/0x130
[20759.296227] ? syscall_trace_enter+0x1d2/0x2d0
[20759.301700] ? __audit_syscall_exit+0x1e4/0x290
[20759.307235] __x64_sys_recvfrom+0x24/0x30
[20759.312226] do_syscall_64+0x55/0x1b0
[20759.316852] entry_SYSCALL_64_after_hwframe+0x44/0xa9
---
 net/ipv4/tcp_bpf.c | 3 +++
 1 file changed, 3 insertions(+)
net/ipv4/tcp_bpf.c +3 -0
index 69b0254083904..ad9f382027311 100644
@@ -96,6 +96,9 @@ int __tcp_bpf_recvmsg(struct sock *sk, struct sk_psock *psock,
 		} while (i != msg_rx->sg.end);
 
 		if (unlikely(peek)) {
+			if (msg_rx == list_last_entry(&psock->ingress_msg,
+						      struct sk_msg, list))
+				break;
 			msg_rx = list_next_entry(msg_rx, list);
 			continue;
 		}
Signature · 1 line
2.25.1
author maintainer
#248 lore raw

PATCH 248/314 bpf, sockhash: Synchronize delete from bucket list on map free

In reply to Greg Kroah-Hartman

From: Jakub Sitnicki <[email protected]>

[ Upstream commit 75e68e5bf2c7fa9d3e874099139df03d5952a3e1 ]

We can end up modifying the sockhash bucket list from two CPUs when a sockhash is being destroyed (sock_hash_free) on one CPU, while a socket that is in the sockhash is unlinking itself from it on another CPU it (sock_hash_delete_from_link).

This results in accessing a list element that is in an undefined state as reported by KASAN:

| ==================================================================
| BUG: KASAN: wild-memory-access in sock_hash_free+0x13c/0x280
| Write of size 8 at addr dead000000000122 by task kworker/2:1/95
|
| CPU: 2 PID: 95 Comm: kworker/2:1 Not tainted 5.7.0-rc7-02961-ge22c35ab0038-dirty #691
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
|  dump_stack+0x97/0xe0
|  ? sock_hash_free+0x13c/0x280
|  __kasan_report.cold+0x5/0x40
|  ? mark_lock+0xbc1/0xc00
|  ? sock_hash_free+0x13c/0x280
|  kasan_report+0x38/0x50
|  ? sock_hash_free+0x152/0x280
|  sock_hash_free+0x13c/0x280
|  bpf_map_free_deferred+0xb2/0xd0
|  ? bpf_map_charge_finish+0x50/0x50
|  ? rcu_read_lock_sched_held+0x81/0xb0
|  ? rcu_read_lock_bh_held+0x90/0x90
|  process_one_work+0x59a/0xac0
|  ? lock_release+0x3b0/0x3b0
|  ? pwq_dec_nr_in_flight+0x110/0x110
|  ? rwlock_bug.part.0+0x60/0x60
|  worker_thread+0x7a/0x680
|  ? _raw_spin_unlock_irqrestore+0x4c/0x60
|  kthread+0x1cc/0x220
|  ? process_one_work+0xac0/0xac0
|  ? kthread_create_on_node+0xa0/0xa0
|  ret_from_fork+0x24/0x30
| ==================================================================

Fix it by reintroducing spin-lock protected critical section around the code that removes the elements from the bucket on sockhash free.

To do that we also need to defer processing of removed elements, until out of atomic context so that we can unlink the socket from the map when holding the sock lock.

---
 net/core/sock_map.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
net/core/sock_map.c +21 -2
index ba65c608c2282..b22e9f1191803 100644
@@ -861,6 +861,7 @@ static void sock_hash_free(struct bpf_map *map)
 {
 	struct bpf_htab *htab = container_of(map, struct bpf_htab, map);
 	struct bpf_htab_bucket *bucket;
+	struct hlist_head unlink_list;
 	struct bpf_htab_elem *elem;
 	struct hlist_node *node;
 	int i;
@@ -872,13 +873,31 @@ static void sock_hash_free(struct bpf_map *map)
 	synchronize_rcu();
 	for (i = 0; i < htab->buckets_num; i++) {
 		bucket = sock_hash_select_bucket(htab, i);
-		hlist_for_each_entry_safe(elem, node, &bucket->head, node) {
-			hlist_del_rcu(&elem->node);
+
+		/* We are racing with sock_hash_delete_from_link to
+		 * enter the spin-lock critical section. Every socket on
+		 * the list is still linked to sockhash. Since link
+		 * exists, psock exists and holds a ref to socket. That
+		 * lets us to grab a socket ref too.
+		 */
+		raw_spin_lock_bh(&bucket->lock);
+		hlist_for_each_entry(elem, &bucket->head, node)
+			sock_hold(elem->sk);
+		hlist_move_list(&bucket->head, &unlink_list);
+		raw_spin_unlock_bh(&bucket->lock);
+
+		/* Process removed entries out of atomic context to
+		 * block for socket lock before deleting the psock's
+		 * link to sockhash.
+		 */
+		hlist_for_each_entry_safe(elem, node, &unlink_list, node) {
+			hlist_del(&elem->node);
 			lock_sock(elem->sk);
 			rcu_read_lock();
 			sock_map_unref(elem->sk, elem);
 			rcu_read_unlock();
 			release_sock(elem->sk);
+			sock_put(elem->sk);
 			sock_hash_free_elem(htab, elem);
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#249 lore raw

PATCH 249/314 tracing/probe: Fix bpf_task_fd_query() for kprobes and uprobes

In reply to Greg Kroah-Hartman

From: Jean-Philippe Brucker <[email protected]>

[ Upstream commit 22d5bd6867364b41576a712755271a7d6161abd6 ]

Commit 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") removed the trace_[ku]probe structure from the trace_event_call->data pointer. As bpf_get_[ku]probe_info() were forgotten in that change, fix them now. These functions are currently only used by the bpf_task_fd_query() syscall handler to collect information about a perf event.

---
 kernel/trace/trace_kprobe.c | 2 +-
 kernel/trace/trace_uprobe.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
kernel/trace/trace_kprobe.c +1 -1
index fba4b48451f6c..26de9c6549566 100644
@@ -1464,7 +1464,7 @@ int bpf_get_kprobe_info(const struct perf_event *event, u32 *fd_type,
 	if (perf_type_tracepoint)
 		tk = find_trace_kprobe(pevent, group);
 	else
-		tk = event->tp_event->data;
+		tk = trace_kprobe_primary_from_call(event->tp_event);
 	if (!tk)
 		return -EINVAL;
 
kernel/trace/trace_uprobe.c +1 -1
index 2619bc5ed520c..5294843de6efd 100644
@@ -1405,7 +1405,7 @@ int bpf_get_uprobe_info(const struct perf_event *event, u32 *fd_type,
 	if (perf_type_tracepoint)
 		tu = find_probe_event(pevent, group);
 	else
-		tu = event->tp_event->data;
+		tu = trace_uprobe_primary_from_call(event->tp_event);
 	if (!tu)
 		return -EINVAL;
 
Signature · 1 line
2.25.1
author maintainer
#250 lore raw

PATCH 250/314 drm/sun4i: hdmi ddc clk: Fix size of m divider

In reply to Greg Kroah-Hartman

From: Jernej Skrabec <[email protected]>

[ Upstream commit 54e1e06bcf1cf6e7ac3f86daa5f7454add24b494 ]

m divider in DDC clock register is 4 bits wide. Fix that.

---
 drivers/gpu/drm/sun4i/sun4i_hdmi.h         | 2 +-
 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/sun4i/sun4i_hdmi.h +1 -1
index 7ad3f06c127e7..00ca35f07ba5b 100644
@@ -148,7 +148,7 @@
 #define SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE	3
 
 #define SUN4I_HDMI_DDC_CLK_REG		0x528
-#define SUN4I_HDMI_DDC_CLK_M(m)			(((m) & 0x7) << 3)
+#define SUN4I_HDMI_DDC_CLK_M(m)			(((m) & 0xf) << 3)
 #define SUN4I_HDMI_DDC_CLK_N(n)			((n) & 0x7)
 
 #define SUN4I_HDMI_DDC_LINE_CTRL_REG	0x540
drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c +1 -1
index 2ff780114106c..12430b9d4e930 100644
@@ -33,7 +33,7 @@ static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
 	unsigned long best_rate = 0;
 	u8 best_m = 0, best_n = 0, _m, _n;
 
-	for (_m = 0; _m < 8; _m++) {
+	for (_m = 0; _m < 16; _m++) {
 		for (_n = 0; _n < 8; _n++) {
 			unsigned long tmp_rate;
 
Signature · 1 line
2.25.1
author maintainer
#251 lore raw

PATCH 251/314 libbpf: Handle GCC noreturn-turned-volatile quirk

In reply to Greg Kroah-Hartman

From: Andrii Nakryiko <[email protected]>

[ Upstream commit 32022fd97ed34f6812802bf1288db27c313576f4 ]

Handle a GCC quirk of emitting extra volatile modifier in DWARF (and subsequently preserved in BTF by pahole) for function pointers marked as __attribute__((noreturn)). This was the way to mark such functions before GCC 2.5 added noreturn attribute. Drop such func_proto modifiers, similarly to how it's done for array (also to handle GCC quirk/bug).

Such volatile attribute is emitted by GCC only, so existing selftests can't express such test. Simple repro is like this (compiled with GCC + BTF generated by pahole):

  struct my_struct {
      void __attribute__((noreturn)) (*fn)(int);
  };
  struct my_struct a;

Without this fix, output will be:

struct my_struct {
    voidvolatile  (*fn)(int);
};

With the fix:

struct my_struct {
    void (*fn)(int);
};
---
 tools/lib/bpf/btf_dump.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)
tools/lib/bpf/btf_dump.c +24 -9
index 87f27e2664c5d..d9e386b8f47ed 100644
@@ -1141,6 +1141,20 @@ static void btf_dump_emit_mods(struct btf_dump *d, struct id_stack *decl_stack)
 	}
 }
 
+static void btf_dump_drop_mods(struct btf_dump *d, struct id_stack *decl_stack)
+{
+	const struct btf_type *t;
+	__u32 id;
+
+	while (decl_stack->cnt) {
+		id = decl_stack->ids[decl_stack->cnt - 1];
+		t = btf__type_by_id(d->btf, id);
+		if (!btf_is_mod(t))
+			return;
+		decl_stack->cnt--;
+	}
+}
+
 static void btf_dump_emit_name(const struct btf_dump *d,
 			       const char *name, bool last_was_ptr)
 {
@@ -1239,14 +1253,7 @@ static void btf_dump_emit_type_chain(struct btf_dump *d,
 			 * a const/volatile modifier for array, so we are
 			 * going to silently skip them here.
 			 */
-			while (decls->cnt) {
-				next_id = decls->ids[decls->cnt - 1];
-				next_t = btf__type_by_id(d->btf, next_id);
-				if (btf_is_mod(next_t))
-					decls->cnt--;
-				else
-					break;
-			}
+			btf_dump_drop_mods(d, decls);
 
 			if (decls->cnt == 0) {
 				btf_dump_emit_name(d, fname, last_was_ptr);
@@ -1274,7 +1281,15 @@ static void btf_dump_emit_type_chain(struct btf_dump *d,
 			__u16 vlen = btf_vlen(t);
 			int i;
 
-			btf_dump_emit_mods(d, decls);
+			/*
+			 * GCC emits extra volatile qualifier for
+			 * __attribute__((noreturn)) function pointers. Clang
+			 * doesn't do it. It's a GCC quirk for backwards
+			 * compatibility with code written for GCC <2.5. So,
+			 * similarly to extra qualifiers for array, just drop
+			 * them, instead of handling them.
+			 */
+			btf_dump_drop_mods(d, decls);
 			if (decls->cnt) {
 				btf_dump_printf(d, " (");
 				btf_dump_emit_type_chain(d, decls, fname, lvl);
Signature · 1 line
2.25.1
author maintainer
#252 lore raw

PATCH 252/314 scsi: acornscsi: Fix an error handling path in acornscsi_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 42c76c9848e13dbe0538d7ae0147a269dfa859cb ]

'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail.

Fixes e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver")
---
 drivers/scsi/arm/acornscsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/arm/acornscsi.c +3 -1
index d12dd89538df2..deab66598910d 100644
@@ -2911,8 +2911,10 @@ static int acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
 	ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
-	if (!ashost->base || !ashost->fast)
+	if (!ashost->base || !ashost->fast) {
+		ret = -ENOMEM;
 		goto out_put;
+	}
 
 	host->irq = ec->irq;
 	ashost->host = host;
Signature · 1 line
2.25.1
author maintainer
#253 lore raw

PATCH 253/314 x86/idt: Keep spurious entries unset in system_vectors

In reply to Greg Kroah-Hartman

From: Vitaly Kuznetsov <[email protected]>

[ Upstream commit 1f1fbc70c10e81f70e9fbe2102d439c883269811 ]

With commit dc20b2d52653 ("x86/idt: Move interrupt gate initialization to IDT code") non assigned system vectors are also marked as used in 'used_vectors' (now 'system_vectors') bitmap. This makes checks in arch_show_interrupts() whether a particular system vector is allocated to always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always shows up in /proc/interrupts.

Another side effect of having all unassigned system vectors marked as used is that irq_matrix_debug_show() will wrongly count them among 'System' vectors.

As it is now ensured that alloc_intr_gate() is not called after init, it is possible to leave unused entries in 'system_vectors' unset to fix these issues.

---
 arch/x86/kernel/idt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/x86/kernel/idt.c +5 -1
index 87ef69a72c52e..7bb4c3cbf4dcd 100644
@@ -318,7 +318,11 @@ void __init idt_setup_apic_and_irq_gates(void)
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
-		set_bit(i, system_vectors);
+		/*
+		 * Don't set the non assigned system vectors in the
+		 * system_vectors bitmap. Otherwise they show up in
+		 * /proc/interrupts.
+		 */
 		entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
 		set_intr_gate(i, entry);
 	}
Signature · 1 line
2.25.1
author maintainer
#254 lore raw

PATCH 254/314 net/filter: Permit reading NET in load_bytes_relative when MAC not set

In reply to Greg Kroah-Hartman

From: YiFei Zhu <[email protected]>

[ Upstream commit 0f5d82f187e1beda3fe7295dfc500af266a5bd80 ]

Added a check in the switch case on start_header that checks for the existence of the header, and in the case that MAC is not set and the caller requests for MAC, -EFAULT. If the caller requests for NET then MAC's existence is completely ignored.

There is no function to check NET header's existence and as far as cgroup_skb/egress is concerned it should always be set.

Removed for ptr >= the start of header, considering offset is bounded unsigned and should always be true. len <= end - mac is redundant to ptr + len <= end.

---
 net/core/filter.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
net/core/filter.c +9 -7
index f1f2304822e3b..a0a492f7cf9ce 100644
@@ -1766,25 +1766,27 @@ BPF_CALL_5(bpf_skb_load_bytes_relative, const struct sk_buff *, skb,
 	   u32, offset, void *, to, u32, len, u32, start_header)
 {
 	u8 *end = skb_tail_pointer(skb);
-	u8 *net = skb_network_header(skb);
-	u8 *mac = skb_mac_header(skb);
-	u8 *ptr;
+	u8 *start, *ptr;
 
-	if (unlikely(offset > 0xffff || len > (end - mac)))
+	if (unlikely(offset > 0xffff))
 		goto err_clear;
 
 	switch (start_header) {
 	case BPF_HDR_START_MAC:
-		ptr = mac + offset;
+		if (unlikely(!skb_mac_header_was_set(skb)))
+			goto err_clear;
+		start = skb_mac_header(skb);
 		break;
 	case BPF_HDR_START_NET:
-		ptr = net + offset;
+		start = skb_network_header(skb);
 		break;
 	default:
 		goto err_clear;
 	}
 
-	if (likely(ptr >= mac && ptr + len <= end)) {
+	ptr = start + offset;
+
+	if (likely(ptr + len <= end)) {
 		memcpy(to, ptr, len);
 		return 0;
 	}
Signature · 1 line
2.25.1
author maintainer
#255 lore raw

PATCH 255/314 nvme-pci: use simple suspend when a HMB is enabled

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit b97120b15ebd3de51325084136d3b9c3cce656d6 ]

While the NVMe specification allows the device to access the host memory buffer in host DRAM from all power states, hosts will fail access to DRAM during S3 and similar power states.

Fixes d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
---
 drivers/nvme/host/pci.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/nvme/host/pci.c +6 -0
index 1c2129493508f..a13cae1901962 100644
@@ -2971,9 +2971,15 @@ static int nvme_suspend(struct device *dev)
 	 * the PCI bus layer to put it into D3 in order to take the PCIe link
 	 * down, so as to allow the platform to achieve its minimum low-power
 	 * state (which may not be possible if the link is up).
+	 *
+	 * If a host memory buffer is enabled, shut down the device as the NVMe
+	 * specification allows the device to access the host memory buffer in
+	 * host DRAM from all power states, but hosts will fail access to DRAM
+	 * during S3.
 	 */
 	if (pm_suspend_via_firmware() || !ctrl->npss ||
 	    !pcie_aspm_enabled(pdev) ||
+	    ndev->nr_host_mem_descs ||
 	    (ndev->ctrl.quirks & NVME_QUIRK_SIMPLE_SUSPEND))
 		return nvme_disable_prepare_reset(ndev, true);
 
Signature · 1 line
2.25.1
author maintainer
#256 lore raw

PATCH 256/314 nfs: set invalid blocks after NFSv4 writes

In reply to Greg Kroah-Hartman

From: Zheng Bin <[email protected]>

[ Upstream commit 3a39e778690500066b31fe982d18e2e394d3bce2 ]

Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt cp file1M /mnt
du -h /mnt/file1M -->0 within 60s, then 1M

When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
nfs4_write_done
nfs4_write_done_cb
nfs_writeback_update_inode
nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
nfs_set_cache_invalid
nfs_refresh_inode_locked
nfs_update_inode

nfsd write response contains change, ctime, mtime, the flag will be clear after nfs_update_inode. Howerver, write response does not contain space_used, previous open response contains space_used whose value is 0, so inode->i_blocks is still 0.

nfs_getattr -->called by "du -h"
do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false
if (do_update) {
__nfs_revalidate_inode
}

Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M" is 0.

Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.

Fixes 16e143751727 ("NFS: More fine grained attribute tracking")
---
 fs/nfs/inode.c         | 14 +++++++++++---
 include/linux/nfs_fs.h |  1 +
 2 files changed, 12 insertions(+), 3 deletions(-)
fs/nfs/inode.c +11 -3
index 3802c88e83720..6de41f7412808 100644
@@ -826,6 +826,8 @@ int nfs_getattr(const struct path *path, struct kstat *stat,
 		do_update |= cache_validity & NFS_INO_INVALID_ATIME;
 	if (request_mask & (STATX_CTIME|STATX_MTIME))
 		do_update |= cache_validity & NFS_INO_REVAL_PAGECACHE;
+	if (request_mask & STATX_BLOCKS)
+		do_update |= cache_validity & NFS_INO_INVALID_BLOCKS;
 	if (do_update) {
 		/* Update the attribute cache */
 		if (!(server->flags & NFS_MOUNT_NOAC))
@@ -1750,7 +1752,8 @@ out_noforce:
 	status = nfs_post_op_update_inode_locked(inode, fattr,
 			NFS_INO_INVALID_CHANGE
 			| NFS_INO_INVALID_CTIME
-			| NFS_INO_INVALID_MTIME);
+			| NFS_INO_INVALID_MTIME
+			| NFS_INO_INVALID_BLOCKS);
 	return status;
 }
 
@@ -1857,7 +1860,8 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
 	nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR
 			| NFS_INO_INVALID_ATIME
 			| NFS_INO_REVAL_FORCED
-			| NFS_INO_REVAL_PAGECACHE);
+			| NFS_INO_REVAL_PAGECACHE
+			| NFS_INO_INVALID_BLOCKS);
 
 	/* Do atomic weak cache consistency updates */
 	nfs_wcc_update_inode(inode, fattr);
@@ -2019,8 +2023,12 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
 		inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used);
 	} else if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED)
 		inode->i_blocks = fattr->du.nfs2.blocks;
-	else
+	else {
+		nfsi->cache_validity |= save_cache_validity &
+				(NFS_INO_INVALID_BLOCKS
+				| NFS_INO_REVAL_FORCED);
 		cache_revalidated = false;
+	}
 
 	/* Update attrtimeo value if we're out of the unstable period */
 	if (attr_changed) {
include/linux/nfs_fs.h +1 -0
index 570a60c2f4f48..ad09c0cc54645 100644
@@ -225,6 +225,7 @@ struct nfs4_copy_state {
 #define NFS_INO_INVALID_OTHER	BIT(12)		/* other attrs are invalid */
 #define NFS_INO_DATA_INVAL_DEFER	\
 				BIT(13)		/* Deferred cache invalidation */
+#define NFS_INO_INVALID_BLOCKS	BIT(14)         /* cached blocks are invalid */
 
 #define NFS_INO_INVALID_ATTR	(NFS_INO_INVALID_CHANGE \
 		| NFS_INO_INVALID_CTIME \
Signature · 1 line
2.25.1
author maintainer
#257 lore raw

PATCH 257/314 xdp: Fix xsk_generic_xmit errno

In reply to Greg Kroah-Hartman

From: Li RongQing <[email protected]>

[ Upstream commit aa2cad0600ed2ca6a0ab39948d4db1666b6c962b ]

Propagate sock_alloc_send_skb error code, not set it to EAGAIN unconditionally, when fail to allocate skb, which might cause that user space unnecessary loops.

---
 net/xdp/xsk.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
net/xdp/xsk.c +1 -3
index 7181a30666b4a..f9eb5efb237c7 100644
@@ -362,10 +362,8 @@ static int xsk_generic_xmit(struct sock *sk)
 
 		len = desc.len;
 		skb = sock_alloc_send_skb(sk, len, 1, &err);
-		if (unlikely(!skb)) {
-			err = -EAGAIN;
+		if (unlikely(!skb))
 			goto out;
-		}
 
 		skb_put(skb, len);
 		addr = desc.addr;
Signature · 1 line
2.25.1
author maintainer
#258 lore raw

PATCH 258/314 iavf: fix speed reporting over virtchnl

In reply to Greg Kroah-Hartman

From: Brett Creeley <[email protected]>

[ Upstream commit e0ef26fbe2b0c62f42ba7667076dc38b693b6fb8 ]

Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver.

Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added.

In order to support communicating link speeds over virtchnl in Mbps the following functionality was added:
- Added u32 link_speed_mbps in the iavf_adapter structure.
- Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps.
- Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro.
- Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro.
- Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove().

Fixes 7c710869d64e ("ice: Add handlers for VF netdevice operations")
---
 drivers/net/ethernet/intel/iavf/iavf.h        | 14 +++
 .../net/ethernet/intel/iavf/iavf_ethtool.c    | 14 ++-
 drivers/net/ethernet/intel/iavf/iavf_main.c   | 25 ++++--
 .../net/ethernet/intel/iavf/iavf_virtchnl.c   | 88 ++++++++++++++++---
 4 files changed, 120 insertions(+), 21 deletions(-)
drivers/net/ethernet/intel/iavf/iavf.h +14 -0
index bd1b1ed323f4f..6b9117a350fac 100644
@@ -87,6 +87,10 @@ struct iavf_vsi {
 #define IAVF_HLUT_ARRAY_SIZE ((IAVF_VFQF_HLUT_MAX_INDEX + 1) * 4)
 #define IAVF_MBPS_DIVISOR	125000 /* divisor to convert to Mbps */
 
+#define IAVF_VIRTCHNL_VF_RESOURCE_SIZE (sizeof(struct virtchnl_vf_resource) + \
+					(IAVF_MAX_VF_VSI * \
+					 sizeof(struct virtchnl_vsi_resource)))
+
 /* MAX_MSIX_Q_VECTORS of these are allocated,
  * but we only use one per queue-specific vector.
  */
@@ -306,6 +310,14 @@ struct iavf_adapter {
 	bool netdev_registered;
 	bool link_up;
 	enum virtchnl_link_speed link_speed;
+	/* This is only populated if the VIRTCHNL_VF_CAP_ADV_LINK_SPEED is set
+	 * in vf_res->vf_cap_flags. Use ADV_LINK_SUPPORT macro to determine if
+	 * this field is valid. This field should be used going forward and the
+	 * enum virtchnl_link_speed above should be considered the legacy way of
+	 * storing/communicating link speeds.
+	 */
+	u32 link_speed_mbps;
+
 	enum virtchnl_ops current_op;
 #define CLIENT_ALLOWED(_a) ((_a)->vf_res ? \
 			    (_a)->vf_res->vf_cap_flags & \
@@ -322,6 +334,8 @@ struct iavf_adapter {
 			VIRTCHNL_VF_OFFLOAD_RSS_PF)))
 #define VLAN_ALLOWED(_a) ((_a)->vf_res->vf_cap_flags & \
 			  VIRTCHNL_VF_OFFLOAD_VLAN)
+#define ADV_LINK_SUPPORT(_a) ((_a)->vf_res->vf_cap_flags & \
+			      VIRTCHNL_VF_CAP_ADV_LINK_SPEED)
 	struct virtchnl_vf_resource *vf_res; /* incl. all VSIs */
 	struct virtchnl_vsi_resource *vsi_res; /* our LAN VSI */
 	struct virtchnl_version_info pf_version;
drivers/net/ethernet/intel/iavf/iavf_ethtool.c +12 -2
index dad3eec8ccd86..758bef02a2a86 100644
@@ -278,7 +278,18 @@ static int iavf_get_link_ksettings(struct net_device *netdev,
 	ethtool_link_ksettings_zero_link_mode(cmd, supported);
 	cmd->base.autoneg = AUTONEG_DISABLE;
 	cmd->base.port = PORT_NONE;
-	/* Set speed and duplex */
+	cmd->base.duplex = DUPLEX_FULL;
+
+	if (ADV_LINK_SUPPORT(adapter)) {
+		if (adapter->link_speed_mbps &&
+		    adapter->link_speed_mbps < U32_MAX)
+			cmd->base.speed = adapter->link_speed_mbps;
+		else
+			cmd->base.speed = SPEED_UNKNOWN;
+
+		return 0;
+	}
+
 	switch (adapter->link_speed) {
 	case IAVF_LINK_SPEED_40GB:
 		cmd->base.speed = SPEED_40000;
@@ -306,7 +317,6 @@ static int iavf_get_link_ksettings(struct net_device *netdev,
 	default:
 		break;
 	}
-	cmd->base.duplex = DUPLEX_FULL;
 
 	return 0;
 }
drivers/net/ethernet/intel/iavf/iavf_main.c +18 -7
index 8e16be960e96b..bacc5fb7eba2c 100644
@@ -1756,17 +1756,17 @@ static int iavf_init_get_resources(struct iavf_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	struct iavf_hw *hw = &adapter->hw;
-	int err = 0, bufsz;
+	int err;
 
 	WARN_ON(adapter->state != __IAVF_INIT_GET_RESOURCES);
 	/* aq msg sent, awaiting reply */
 	if (!adapter->vf_res) {
-		bufsz = sizeof(struct virtchnl_vf_resource) +
-			(IAVF_MAX_VF_VSI *
-			sizeof(struct virtchnl_vsi_resource));
-		adapter->vf_res = kzalloc(bufsz, GFP_KERNEL);
-		if (!adapter->vf_res)
+		adapter->vf_res = kzalloc(IAVF_VIRTCHNL_VF_RESOURCE_SIZE,
+					  GFP_KERNEL);
+		if (!adapter->vf_res) {
+			err = -ENOMEM;
 			goto err;
+		}
 	}
 	err = iavf_get_vf_config(adapter);
 	if (err == IAVF_ERR_ADMIN_QUEUE_NO_WORK) {
@@ -2036,7 +2036,7 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
 	iavf_reset_interrupt_capability(adapter);
 	iavf_free_queues(adapter);
 	iavf_free_q_vectors(adapter);
-	kfree(adapter->vf_res);
+	memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE);
 	iavf_shutdown_adminq(&adapter->hw);
 	adapter->netdev->flags &= ~IFF_UP;
 	clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section);
@@ -2487,6 +2487,16 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter,
 {
 	int speed = 0, ret = 0;
 
+	if (ADV_LINK_SUPPORT(adapter)) {
+		if (adapter->link_speed_mbps < U32_MAX) {
+			speed = adapter->link_speed_mbps;
+			goto validate_bw;
+		} else {
+			dev_err(&adapter->pdev->dev, "Unknown link speed\n");
+			return -EINVAL;
+		}
+	}
+
 	switch (adapter->link_speed) {
 	case IAVF_LINK_SPEED_40GB:
 		speed = 40000;
@@ -2510,6 +2520,7 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter,
 		break;
 	}
 
+validate_bw:
 	if (max_tx_rate > speed) {
 		dev_err(&adapter->pdev->dev,
 			"Invalid tx rate specified\n");
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +76 -12

138 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#259 lore raw

PATCH 259/314 bpf: Fix memlock accounting for sock_hash

In reply to Greg Kroah-Hartman

From: Andrey Ignatov <[email protected]>

[ Upstream commit 60e5ca8a64bad8f3e2e20a1e57846e497361c700 ]

Add missed bpf_map_charge_init() in sock_hash_alloc() and correspondingly bpf_map_charge_finish() on ENOMEM.

It was found accidentally while working on unrelated selftest that checks "map->memory.pages > 0" is true for all map types.

Before:

	# bpftool m l
	...
	3692: sockhash  name m_sockhash  flags 0x0
		key 4B  value 4B  max_entries 8  memlock 0B

After:

	# bpftool m l
	...
	84: sockmap  name m_sockmap  flags 0x0
		key 4B  value 4B  max_entries 8  memlock 4096B
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/core/sock_map.c | 4 ++++
 1 file changed, 4 insertions(+)
net/core/sock_map.c +4 -0
index b22e9f1191803..6bbc118bf00e9 100644
@@ -837,11 +837,15 @@ static struct bpf_map *sock_hash_alloc(union bpf_attr *attr)
 		err = -EINVAL;
 		goto free_htab;
 	}
+	err = bpf_map_charge_init(&htab->map.memory, cost);
+	if (err)
+		goto free_htab;
 
 	htab->buckets = bpf_map_area_alloc(htab->buckets_num *
 					   sizeof(struct bpf_htab_bucket),
 					   htab->map.numa_node);
 	if (!htab->buckets) {
+		bpf_map_charge_finish(&htab->map.memory);
 		err = -ENOMEM;
 		goto free_htab;
 	}
Signature · 1 line
2.25.1
author maintainer
#260 lore raw

PATCH 260/314 usb/xhci-plat: Set PM runtime as active on resume

In reply to Greg Kroah-Hartman

From: Qais Yousef <[email protected]>

[ Upstream commit 79112cc3c29f4a8c73a21428fbcbcb0afb005e3e ]

Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume.

ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1].

[1] https://lore.kernel.org/lkml/[email protected]/

---
 drivers/usb/host/xhci-plat.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-plat.c +9 -1
index 52c625c023410..60d06e9b600f8 100644
@@ -410,7 +410,15 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	return xhci_resume(xhci, 0);
+	ret = xhci_resume(xhci, 0);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
 }
 
 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
Signature · 9 lines
2.25.1




_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#261 lore raw

PATCH 261/314 usb: host: ehci-platform: add a quirk to avoid stuck

In reply to Greg Kroah-Hartman

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit cc7eac1e4afdd151085be4d0341a155760388653 ]

Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting stuck very rarely after a full/low usb device was disconnected. To detect/recover from such a situation, the controllers require a special way which poll the EHCI PORTSC register and changes the OHCI functional state.

So, this patch adds a polling timer into the ehci-platform driver, and if the ehci driver detects the issue by the EHCI PORTSC register, the ehci driver removes a companion device (= the OHCI controller) to change the OHCI functional state to USB Reset once. And then, the ehci driver adds the companion device again.

---
 drivers/usb/host/ehci-platform.c | 127 +++++++++++++++++++++++++++++++
 include/linux/usb/ehci_def.h     |   2 +-
 2 files changed, 128 insertions(+), 1 deletion(-)
drivers/usb/host/ehci-platform.c +127 -0
index 769749ca5961a..e4fc3f66d43bf 100644
@@ -29,6 +29,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
+#include <linux/sys_soc.h>
+#include <linux/timer.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/ehci_pdriver.h>
@@ -44,6 +46,9 @@ struct ehci_platform_priv {
 	struct clk *clks[EHCI_MAX_CLKS];
 	struct reset_control *rsts;
 	bool reset_on_resume;
+	bool quirk_poll;
+	struct timer_list poll_timer;
+	struct delayed_work poll_work;
 };
 
 static const char hcd_name[] = "ehci-platform";
@@ -118,6 +123,111 @@ static struct usb_ehci_pdata ehci_platform_defaults = {
 	.power_off =		ehci_platform_power_off,
 };
 
+/**
+ * quirk_poll_check_port_status - Poll port_status if the device sticks
+ * @ehci: the ehci hcd pointer
+ *
+ * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting
+ * stuck very rarely after a full/low usb device was disconnected. To
+ * detect such a situation, the controllers require a special way which poll
+ * the EHCI PORTSC register.
+ *
+ * Return: true if the controller's port_status indicated getting stuck
+ */
+static bool quirk_poll_check_port_status(struct ehci_hcd *ehci)
+{
+	u32 port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+
+	if (!(port_status & PORT_OWNER) &&
+	     (port_status & PORT_POWER) &&
+	    !(port_status & PORT_CONNECT) &&
+	     (port_status & PORT_LS_MASK))
+		return true;
+
+	return false;
+}
+
+/**
+ * quirk_poll_rebind_companion - rebind comanion device to recover
+ * @ehci: the ehci hcd pointer
+ *
+ * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting
+ * stuck very rarely after a full/low usb device was disconnected. To
+ * recover from such a situation, the controllers require changing the OHCI
+ * functional state.
+ */
+static void quirk_poll_rebind_companion(struct ehci_hcd *ehci)
+{
+	struct device *companion_dev;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+
+	companion_dev = usb_of_get_companion_dev(hcd->self.controller);
+	if (!companion_dev)
+		return;
+
+	device_release_driver(companion_dev);
+	if (device_attach(companion_dev) < 0)
+		ehci_err(ehci, "%s: failed\n", __func__);
+
+	put_device(companion_dev);
+}
+
+static void quirk_poll_work(struct work_struct *work)
+{
+	struct ehci_platform_priv *priv =
+		container_of(to_delayed_work(work), struct ehci_platform_priv,
+			     poll_work);
+	struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd,
+					     priv);
+
+	/* check the status twice to reduce misdetection rate */
+	if (!quirk_poll_check_port_status(ehci))
+		return;
+	udelay(10);
+	if (!quirk_poll_check_port_status(ehci))
+		return;
+
+	ehci_dbg(ehci, "%s: detected getting stuck. rebind now!\n", __func__);
+	quirk_poll_rebind_companion(ehci);
+}
+
+static void quirk_poll_timer(struct timer_list *t)
+{
+	struct ehci_platform_priv *priv = from_timer(priv, t, poll_timer);
+	struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd,
+					     priv);
+
+	if (quirk_poll_check_port_status(ehci)) {
+		/*
+		 * Now scheduling the work for testing the port more. Note that
+		 * updating the status is possible to be delayed when
+		 * reconnection. So, this uses delayed work with 5 ms delay
+		 * to avoid misdetection.
+		 */
+		schedule_delayed_work(&priv->poll_work, msecs_to_jiffies(5));
+	}
+
+	mod_timer(&priv->poll_timer, jiffies + HZ);
+}
+
+static void quirk_poll_init(struct ehci_platform_priv *priv)
+{
+	INIT_DELAYED_WORK(&priv->poll_work, quirk_poll_work);
+	timer_setup(&priv->poll_timer, quirk_poll_timer, 0);
+	mod_timer(&priv->poll_timer, jiffies + HZ);
+}
+
+static void quirk_poll_end(struct ehci_platform_priv *priv)
+{
+	del_timer_sync(&priv->poll_timer);
+	cancel_delayed_work(&priv->poll_work);
+}
+
+static const struct soc_device_attribute quirk_poll_match[] = {
+	{ .family = "R-Car Gen3" },
+	{ /* sentinel*/ }
+};
+
 static int ehci_platform_probe(struct platform_device *dev)
 {
 	struct usb_hcd *hcd;
@@ -176,6 +286,9 @@ static int ehci_platform_probe(struct platform_device *dev)
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (soc_device_match(quirk_poll_match))
+			priv->quirk_poll = true;
+
 		for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
 			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
 			if (IS_ERR(priv->clks[clk])) {
@@ -247,6 +360,9 @@ static int ehci_platform_probe(struct platform_device *dev)
 	device_enable_async_suspend(hcd->self.controller);
 	platform_set_drvdata(dev, hcd);
 
+	if (priv->quirk_poll)
+		quirk_poll_init(priv);
+
 	return err;
 
 err_power:
@@ -273,6 +389,9 @@ static int ehci_platform_remove(struct platform_device *dev)
 	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
 	int clk;
 
+	if (priv->quirk_poll)
+		quirk_poll_end(priv);
+
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
@@ -297,9 +416,13 @@ static int ehci_platform_suspend(struct device *dev)
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
 	struct platform_device *pdev = to_platform_device(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
 	bool do_wakeup = device_may_wakeup(dev);
 	int ret;
 
+	if (priv->quirk_poll)
+		quirk_poll_end(priv);
+
 	ret = ehci_suspend(hcd, do_wakeup);
 	if (ret)
 		return ret;
@@ -331,6 +454,10 @@ static int ehci_platform_resume(struct device *dev)
 	}
 
 	ehci_resume(hcd, priv->reset_on_resume);
+
+	if (priv->quirk_poll)
+		quirk_poll_init(priv);
+
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
include/linux/usb/ehci_def.h +1 -1
index a15ce99dfc2d6..78e0063555575 100644
@@ -151,7 +151,7 @@ struct ehci_regs {
 #define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
 #define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+#define PORT_LS_MASK	(3<<10)		/* Link status (SE0, K or J */
 /* 9 reserved */
 #define PORT_LPM	(1<<9)		/* LPM transaction */
 #define PORT_RESET	(1<<8)		/* reset port */
Signature · 1 line
2.25.1
author maintainer
#262 lore raw

PATCH 262/314 usb/ehci-platform: Set PM runtime as active on resume

In reply to Greg Kroah-Hartman

From: Qais Yousef <[email protected]>

[ Upstream commit 16bdc04cc98ab0c74392ceef2475ecc5e73fcf49 ]

Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume.

ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1].

[1] https://lore.kernel.org/lkml/[email protected]/

---
 drivers/usb/host/ehci-platform.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/host/ehci-platform.c +4 -0
index e4fc3f66d43bf..e9a49007cce4a 100644
@@ -455,6 +455,10 @@ static int ehci_platform_resume(struct device *dev)
 
 	ehci_resume(hcd, priv->reset_on_resume);
 
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	if (priv->quirk_poll)
 		quirk_poll_init(priv);
 
Signature · 1 line
2.25.1
author maintainer
#263 lore raw

PATCH 263/314 perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()

In reply to Greg Kroah-Hartman

From: Gaurav Singh <[email protected]>

[ Upstream commit 11b6e5482e178055ec1f2444b55f2518713809d1 ]

The 'evname' variable can be NULL, as it is checked a few lines back, check it before using.

Fixes 9e207ddfa207 ("perf report: Show call graph from reference events")
Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/builtin-report.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/perf/builtin-report.c +1 -2
index 4d8db41b949a4..d3c0b04e2e22b 100644
@@ -462,8 +462,7 @@ static size_t hists__fprintf_nr_sample_events(struct hists *hists, struct report
 	if (rep->time_str)
 		ret += fprintf(fp, " (time slices: %s)", rep->time_str);
 
-	if (symbol_conf.show_ref_callgraph &&
-	    strstr(evname, "call-graph=no")) {
+	if (symbol_conf.show_ref_callgraph && evname && strstr(evname, "call-graph=no")) {
 		ret += fprintf(fp, ", show reference callgraph");
 	}
 
Signature · 1 line
2.25.1
author maintainer
#264 lore raw

PATCH 264/314 perf stat: Fix NULL pointer dereference

In reply to Greg Kroah-Hartman

From: Hongbo Yao <[email protected]>

[ Upstream commit c0c652fc705de75f4ba52e93053acc1ed3933e74 ]

If config->aggr_map is NULL and config->aggr_get_id is not NULL, the function print_aggr() will still calling arrg_update_shadow(), which can result in accessing the invalid pointer.

Fixes 088519f318be ("perf stat: Move the display functions to stat-display.c")
Cc Alexander Shishkin <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Wei Li <[email protected]>
---
 tools/perf/util/stat-display.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/perf/util/stat-display.c +2 -2
index ed3b0ac2f7850..373e399e57d28 100644
@@ -661,7 +661,7 @@ static void print_aggr(struct perf_stat_config *config,
 	int s;
 	bool first;
 
-	if (!(config->aggr_map || config->aggr_get_id))
+	if (!config->aggr_map || !config->aggr_get_id)
 		return;
 
 	aggr_update_shadow(config, evlist);
@@ -1140,7 +1140,7 @@ static void print_percore(struct perf_stat_config *config,
 	int s;
 	bool first = true;
 
-	if (!(config->aggr_map || config->aggr_get_id))
+	if (!config->aggr_map || !config->aggr_get_id)
 		return;
 
 	for (s = 0; s < config->aggr_map->nr; s++) {
Signature · 1 line
2.25.1
author maintainer
#265 lore raw

PATCH 265/314 ext4: stop overwrite the errcode in ext4_setup_super

In reply to Greg Kroah-Hartman

From: yangerkun <[email protected]>

[ Upstream commit 5adaccac46ea79008d7b75f47913f1a00f91d0ce ]

Now the errcode from ext4_commit_super will overwrite EROFS exists in ext4_setup_super. Actually, no need to call ext4_commit_super since we will return EROFS. Fix it by goto done directly.

Fixes c89128a00838 ("ext4: handle errors on ext4_commit_super")
---
 fs/ext4/super.c | 1 +
 1 file changed, 1 insertion(+)
fs/ext4/super.c +1 -0
index d3500eaf900e2..830160ad07a63 100644
@@ -2294,6 +2294,7 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 		ext4_msg(sb, KERN_ERR, "revision level too high, "
 			 "forcing read-only mode");
 		err = -EROFS;
+		goto done;
 	}
 	if (read_only)
 		goto done;
Signature · 1 line
2.25.1
author maintainer
#266 lore raw

PATCH 266/314 bcache: fix potential deadlock problem in btree_gc_coalesce

In reply to Greg Kroah-Hartman

From: Zhiqiang Liu <[email protected]>

[ Upstream commit be23e837333a914df3f24bf0b32e87b0331ab8d1 ]

coccicheck reports:
drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417

In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return.

btree_gc_coalesce func details as follows:

	if alloc new_nodes[i] fails:
		goto out_nocoalesce;
	// obtain new_nodes[i]->write_lock
	mutex_lock(&new_nodes[i]->write_lock)
	// main coalescing process
	for (i = nodes - 1; i > 0; --i)
		[snipped]
		if coalescing process fails:
			// Here, directly goto out_nocoalesce
			 // tag will cause a deadlock
			goto out_nocoalesce;
		[snipped]
	// release new_nodes[i]->write_lock
	mutex_unlock(&new_nodes[i]->write_lock)
	// coalesing succ, return
	return;
out_nocoalesce:
	btree_node_free(new_nodes[i])	// free new_nodes[i]
	// obtain new_nodes[i]->write_lock
	mutex_lock(&new_nodes[i]->write_lock);
	// set flag for reuse
	clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags);
	// release new_nodes[i]->write_lock
	mutex_unlock(&new_nodes[i]->write_lock);

To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag.

(Coly Li helps to clean up commit log format.)

Fixes 2a285686c109816 ("bcache: btree locking rework")
---
 drivers/md/bcache/btree.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/md/bcache/btree.c +6 -2
index 46a8b5a91c386..3c1109fceb2fb 100644
@@ -1442,7 +1442,7 @@ static int btree_gc_coalesce(struct btree *b, struct btree_op *op,
 			if (__set_blocks(n1, n1->keys + n2->keys,
 					 block_bytes(b->c)) >
 			    btree_blocks(new_nodes[i]))
-				goto out_nocoalesce;
+				goto out_unlock_nocoalesce;
 
 			keys = n2->keys;
 			/* Take the key of the node we're getting rid of */
@@ -1471,7 +1471,7 @@ static int btree_gc_coalesce(struct btree *b, struct btree_op *op,
 
 		if (__bch_keylist_realloc(&keylist,
 					  bkey_u64s(&new_nodes[i]->key)))
-			goto out_nocoalesce;
+			goto out_unlock_nocoalesce;
 
 		bch_btree_node_write(new_nodes[i], &cl);
 		bch_keylist_add(&keylist, &new_nodes[i]->key);
@@ -1517,6 +1517,10 @@ static int btree_gc_coalesce(struct btree *b, struct btree_op *op,
 	/* Invalidated our iterator */
 	return -EINTR;
 
+out_unlock_nocoalesce:
+	for (i = 0; i < nodes; i++)
+		mutex_unlock(&new_nodes[i]->write_lock);
+
 out_nocoalesce:
 	closure_sync(&cl);
 
Signature · 1 line
2.25.1
author maintainer
#267 lore raw

PATCH 267/314 powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL

In reply to Greg Kroah-Hartman

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit a6e2c226c3d51fd93636320e47cabc8a8f0824c5 ]

With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard lockup watchdog interrupt when in OPAL mode.

This happens in show_instructions() if the kernel takes the watchdog NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions() updates the variable pc in the loop and the second iteration will result in BUG().

We hit the BUG_ON due the below check in __va()

  #define __va(x)
  ({
  	VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
  	(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
  })

Fix it by moving the check out of the loop. Also update nip so that the nip == pc check still matches.

Fixes 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
[mpe: Use IS_ENABLED(), massage change log]
---
 arch/powerpc/kernel/process.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
arch/powerpc/kernel/process.c +11 -9
index 639ceae7da9d8..bd0c258a1d5dd 100644
@@ -1218,29 +1218,31 @@ struct task_struct *__switch_to(struct task_struct *prev,
 static void show_instructions(struct pt_regs *regs)
 {
 	int i;
+	unsigned long nip = regs->nip;
 	unsigned long pc = regs->nip - (NR_INSN_TO_PRINT * 3 / 4 * sizeof(int));
 
 	printk("Instruction dump:");
 
+	/*
+	 * If we were executing with the MMU off for instructions, adjust pc
+	 * rather than printing XXXXXXXX.
+	 */
+	if (!IS_ENABLED(CONFIG_BOOKE) && !(regs->msr & MSR_IR)) {
+		pc = (unsigned long)phys_to_virt(pc);
+		nip = (unsigned long)phys_to_virt(regs->nip);
+	}
+
 	for (i = 0; i < NR_INSN_TO_PRINT; i++) {
 		int instr;
 
 		if (!(i % 8))
 			pr_cont("\n");
 
-#if !defined(CONFIG_BOOKE)
-		/* If executing with the IMMU off, adjust pc rather
-		 * than print XXXXXXXX.
-		 */
-		if (!(regs->msr & MSR_IR))
-			pc = (unsigned long)phys_to_virt(pc);
-#endif
-
 		if (!__kernel_text_address(pc) ||
 		    probe_kernel_address((const void *)pc, instr)) {
 			pr_cont("XXXXXXXX ");
 		} else {
-			if (regs->nip == pc)
+			if (nip == pc)
 				pr_cont("<%08x> ", instr);
 			else
 				pr_cont("%08x ", instr);
Signature · 1 line
2.25.1
author maintainer
#268 lore raw

PATCH 268/314 afs: Fix non-setting of mtime when writing into mmap

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit bb413489288e4e457353bac513fddb6330d245ca ]

The mtime on an inode needs to be updated when a write is made into an mmap'ed section. There are three ways in which this could be done: update it when page_mkwrite is called, update it when a page is changed from dirty to writeback or leave it to the server and fix the mtime up from the reply to the StoreData RPC.

Found with the generic/215 xfstest.

Fixes 1cf7a1518aef ("afs: Implement shared-writeable mmap")
---
 fs/afs/write.c | 1 +
 1 file changed, 1 insertion(+)
fs/afs/write.c +1 -0
index cb76566763dba..371db86c6c5ec 100644
@@ -811,6 +811,7 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf)
 			     vmf->page->index, priv);
 	SetPagePrivate(vmf->page);
 	set_page_private(vmf->page, priv);
+	file_update_time(file);
 
 	sb_end_pagefault(inode->i_sb);
 	return VM_FAULT_LOCKED;
Signature · 1 line
2.25.1
author maintainer
#269 lore raw

PATCH 269/314 afs: afs_write_end() should change i_size under the right lock

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 1f32ef79897052ef7d3d154610d8d6af95abde83 ]

Fix afs_write_end() to change i_size under vnode->cb_lock rather than ->wb_lock so that it doesn't race with afs_vnode_commit_status() and afs_getattr().

The ->wb_lock is only meant to guard access to ->wb_keys which isn't accessed by that piece of code.

Fixes 4343d00872e1 ("afs: Get rid of the afs_writeback record")
---
 fs/afs/write.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/afs/write.c +2 -2
index 371db86c6c5ec..96b042af62485 100644
@@ -194,11 +194,11 @@ int afs_write_end(struct file *file, struct address_space *mapping,
 
 	i_size = i_size_read(&vnode->vfs_inode);
 	if (maybe_i_size > i_size) {
-		spin_lock(&vnode->wb_lock);
+		write_seqlock(&vnode->cb_lock);
 		i_size = i_size_read(&vnode->vfs_inode);
 		if (maybe_i_size > i_size)
 			i_size_write(&vnode->vfs_inode, maybe_i_size);
-		spin_unlock(&vnode->wb_lock);
+		write_sequnlock(&vnode->cb_lock);
 	}
 
 	if (!PageUptodate(page)) {
Signature · 1 line
2.25.1
author maintainer
#270 lore raw

PATCH 270/314 afs: Fix EOF corruption

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 3f4aa981816368fe6b1d13c2bfbe76df9687e787 ]

When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld.

The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later.

Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway.

This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue:

  ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \
      -T arch/x86/realmode/rm/realmode.lds \
      arch/x86/realmode/rm/header.o \
      arch/x86/realmode/rm/trampoline_64.o \
      arch/x86/realmode/rm/stack.o \
      arch/x86/realmode/rm/reboot.o \
      -o arch/x86/realmode/rm/realmode.elf
  arch/x86/tools/relocs --realmode \
      arch/x86/realmode/rm/realmode.elf \
      >arch/x86/realmode/rm/realmode.relocs

This results in the latter giving:

Cannot read ELF section headers 0/18: Success

as the realmode.elf file got corrupted.

The sequence of events can also be driven with:

	xfs_io -t -f \
		-c "pwrite -S 0x58 0 0x58" \
		-c "pwrite -S 0x59 10000 1000" \
		-c "close" \
		/afs/example.com/scratch/a
Fixes 31143d5d515e ("AFS: implement basic file write support")
---
 fs/afs/inode.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
fs/afs/inode.c +11 -1
index 46d2d7cb461da..a74e8e209454b 100644
@@ -171,6 +171,7 @@ static void afs_apply_status(struct afs_fs_cursor *fc,
 	struct timespec64 t;
 	umode_t mode;
 	bool data_changed = false;
+	bool change_size = false;
 
 	BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));
 
@@ -226,6 +227,7 @@ static void afs_apply_status(struct afs_fs_cursor *fc,
 		} else {
 			set_bit(AFS_VNODE_ZAP_DATA, &vnode->flags);
 		}
+		change_size = true;
 	} else if (vnode->status.type == AFS_FTYPE_DIR) {
 		/* Expected directory change is handled elsewhere so
 		 * that we can locally edit the directory and save on a
@@ -233,11 +235,19 @@ static void afs_apply_status(struct afs_fs_cursor *fc,
 		 */
 		if (test_bit(AFS_VNODE_DIR_VALID, &vnode->flags))
 			data_changed = false;
+		change_size = true;
 	}
 
 	if (data_changed) {
 		inode_set_iversion_raw(&vnode->vfs_inode, status->data_version);
-		afs_set_i_size(vnode, status->size);
+
+		/* Only update the size if the data version jumped.  If the
+		 * file is being modified locally, then we might have our own
+		 * idea of what the size should be that's not the same as
+		 * what's on the server.
+		 */
+		if (change_size)
+			afs_set_i_size(vnode, status->size);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#271 lore raw

PATCH 271/314 afs: Always include dir in bulk status fetch from afs_do_lookup()

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 13fcc6356a94558a0a4857dc00cd26b3834a1b3e ]

When a lookup is done in an AFS directory, the filesystem will speculate and fetch up to 49 other statuses for files in the same directory and fetch those as well, turning them into inodes or updating inodes that already exist.

However, occasionally, a callback break might go missing due to NAT timing out, but the afs filesystem doesn't then realise that the directory is not up to date.

Alleviate this by using one of the status slots to check the directory in which the lookup is being done.

---
 fs/afs/dir.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
fs/afs/dir.c +7 -2
index d1e1caa23c8b3..3c486340b2208 100644
@@ -658,7 +658,8 @@ static struct inode *afs_do_lookup(struct inode *dir, struct dentry *dentry,
 
 	cookie->ctx.actor = afs_lookup_filldir;
 	cookie->name = dentry->d_name;
-	cookie->nr_fids = 1; /* slot 0 is saved for the fid we actually want */
+	cookie->nr_fids = 2; /* slot 0 is saved for the fid we actually want
+			      * and slot 1 for the directory */
 
 	read_seqlock_excl(&dvnode->cb_lock);
 	dcbi = rcu_dereference_protected(dvnode->cb_interest,
@@ -709,7 +710,11 @@ static struct inode *afs_do_lookup(struct inode *dir, struct dentry *dentry,
 	if (!cookie->inodes)
 		goto out_s;
 
-	for (i = 1; i < cookie->nr_fids; i++) {
+	cookie->fids[1] = dvnode->fid;
+	cookie->statuses[1].cb_break = afs_calc_vnode_cb_break(dvnode);
+	cookie->inodes[1] = igrab(&dvnode->vfs_inode);
+
+	for (i = 2; i < cookie->nr_fids; i++) {
 		scb = &cookie->statuses[i];
 
 		/* Find any inodes that already exist and get their
Signature · 1 line
2.25.1
author maintainer
#272 lore raw

PATCH 272/314 afs: Set error flag rather than return error from file status decode

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 38355eec6a7d2b8f2f313f9174736dc877744e59 ]

Set a flag in the call struct to indicate an unmarshalling error rather than return and handle an error from the decoding of file statuses. This flag is checked on a successful return from the delivery function.

---
 fs/afs/fsclient.c  | 88 +++++++++++++---------------------------------
 fs/afs/internal.h  |  1 +
 fs/afs/rxrpc.c     |  4 +++
 fs/afs/yfsclient.c | 85 +++++++++++++-------------------------------
 4 files changed, 55 insertions(+), 123 deletions(-)
fs/afs/fsclient.c +25 -63
index 0a4fed9e706b7..5c2729fc07e52 100644
@@ -56,16 +56,15 @@ static void xdr_dump_bad(const __be32 *bp)
 /*
  * decode an AFSFetchStatus block
  */
-static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
-				     struct afs_call *call,
-				     struct afs_status_cb *scb)
+static void xdr_decode_AFSFetchStatus(const __be32 **_bp,
+				      struct afs_call *call,
+				      struct afs_status_cb *scb)
 {
 	const struct afs_xdr_AFSFetchStatus *xdr = (const void *)*_bp;
 	struct afs_file_status *status = &scb->status;
 	bool inline_error = (call->operation_ID == afs_FS_InlineBulkStatus);
 	u64 data_version, size;
 	u32 type, abort_code;
-	int ret;
 
 	abort_code = ntohl(xdr->abort_code);
 
@@ -79,7 +78,7 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 			 */
 			status->abort_code = abort_code;
 			scb->have_error = true;
-			goto good;
+			goto advance;
 		}
 
 		pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version));
@@ -89,7 +88,7 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 	if (abort_code != 0 && inline_error) {
 		status->abort_code = abort_code;
 		scb->have_error = true;
-		goto good;
+		goto advance;
 	}
 
 	type = ntohl(xdr->type);
@@ -125,15 +124,13 @@ static int xdr_decode_AFSFetchStatus(const __be32 **_bp,
 	data_version |= (u64)ntohl(xdr->data_version_hi) << 32;
 	status->data_version = data_version;
 	scb->have_status = true;
-good:
-	ret = 0;
 advance:
 	*_bp = (const void *)*_bp + sizeof(*xdr);
-	return ret;
+	return;
 
 bad:
 	xdr_dump_bad(*_bp);
-	ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
 	goto advance;
 }
 
@@ -254,9 +251,7 @@ static int afs_deliver_fs_fetch_status_vnode(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSCallBack(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
@@ -419,9 +414,7 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call)
 			return ret;
 
 		bp = call->buffer;
-		ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
+		xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 		xdr_decode_AFSCallBack(&bp, call, call->out_scb);
 		xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
@@ -579,12 +572,8 @@ static int afs_deliver_fs_create_vnode(struct afs_call *call)
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
 	xdr_decode_AFSFid(&bp, call->out_fid);
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	xdr_decode_AFSCallBack(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
@@ -693,9 +682,7 @@ static int afs_deliver_fs_dir_status_and_vol(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -786,12 +773,8 @@ static int afs_deliver_fs_link(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -880,12 +863,8 @@ static int afs_deliver_fs_symlink(struct afs_call *call)
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
 	xdr_decode_AFSFid(&bp, call->out_fid);
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -988,16 +967,12 @@ static int afs_deliver_fs_rename(struct afs_call *call)
 	if (ret < 0)
 		return ret;
 
+	bp = call->buffer;
 	/* If the two dirs are the same, we have two copies of the same status
 	 * report, so we just decode it twice.
 	 */
-	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
-	if (ret < 0)
-		return ret;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -1105,9 +1080,7 @@ static int afs_deliver_fs_store_data(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -1285,9 +1258,7 @@ static int afs_deliver_fs_store_status(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
@@ -1956,9 +1927,7 @@ static int afs_deliver_fs_fetch_status(struct afs_call *call)
 
 	/* unmarshall the reply once we've received all of it */
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSCallBack(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
@@ -2064,10 +2033,7 @@ static int afs_deliver_fs_inline_bulk_status(struct afs_call *call)
 
 		bp = call->buffer;
 		scb = &call->out_scb[call->count];
-		ret = xdr_decode_AFSFetchStatus(&bp, call, scb);
-		if (ret < 0)
-			return ret;
-
+		xdr_decode_AFSFetchStatus(&bp, call, scb);
 		call->count++;
 		if (call->count < call->count2)
 			goto more_counts;
@@ -2245,9 +2211,7 @@ static int afs_deliver_fs_fetch_acl(struct afs_call *call)
 			return ret;
 
 		bp = call->buffer;
-		ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
+		xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 		xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 		call->unmarshall++;
@@ -2328,9 +2292,7 @@ static int afs_deliver_fs_file_status_and_vol(struct afs_call *call)
 		return ret;
 
 	bp = call->buffer;
-	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-	if (ret < 0)
-		return ret;
+	xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
fs/afs/internal.h +1 -0
index 485cc3b2aaa8a..555ad7c9afcb6 100644
@@ -161,6 +161,7 @@ struct afs_call {
 	bool			upgrade;	/* T to request service upgrade */
 	bool			have_reply_time; /* T if have got reply_time */
 	bool			intr;		/* T if interruptible */
+	bool			unmarshalling_error; /* T if an unmarshalling error occurred */
 	u16			service_id;	/* Actual service ID (after upgrade) */
 	unsigned int		debug_id;	/* Trace ID */
 	u32			operation_ID;	/* operation ID for an incoming call */
fs/afs/rxrpc.c +4 -0
index 52aa90fb4fbd9..6adab30a83993 100644
@@ -540,6 +540,8 @@ static void afs_deliver_to_call(struct afs_call *call)
 
 		ret = call->type->deliver(call);
 		state = READ_ONCE(call->state);
+		if (ret == 0 && call->unmarshalling_error)
+			ret = -EBADMSG;
 		switch (ret) {
 		case 0:
 			afs_queue_call_work(call);
@@ -963,5 +965,7 @@ noinline int afs_protocol_error(struct afs_call *call, int error,
 				enum afs_eproto_cause cause)
 {
 	trace_afs_protocol_error(call, error, cause);
+	if (call)
+		call->unmarshalling_error = true;
 	return error;
 }
fs/afs/yfsclient.c +25 -60

179 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#273 lore raw

PATCH 273/314 afs: Fix the mapping of the UAEOVERFLOW abort code

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 4ec89596d06bd481ba827f3b409b938d63914157 ]

Abort code UAEOVERFLOW is returned when we try and set a time that's out of range, but it's currently mapped to EREMOTEIO by the default case.

Fix UAEOVERFLOW to map instead to EOVERFLOW.

Found with the generic/258 xfstest. Note that the test is wrong as it assumes that the filesystem will support a pre-UNIX-epoch date.

Fixes 1eda8bab70ca ("afs: Add support for the UAE error table")
---
 fs/afs/misc.c | 1 +
 1 file changed, 1 insertion(+)
fs/afs/misc.c +1 -0
index 52b19e9c15351..5334f1bd2bca7 100644
@@ -83,6 +83,7 @@ int afs_abort_to_error(u32 abort_code)
 	case UAENOLCK:			return -ENOLCK;
 	case UAENOTEMPTY:		return -ENOTEMPTY;
 	case UAELOOP:			return -ELOOP;
+	case UAEOVERFLOW:		return -EOVERFLOW;
 	case UAENOMEDIUM:		return -ENOMEDIUM;
 	case UAEDQUOT:			return -EDQUOT;
 
Signature · 1 line
2.25.1
author maintainer
#274 lore raw

PATCH 274/314 bnxt_en: Return from timer if interface is not in open state.

In reply to Greg Kroah-Hartman

From: Vasundhara Volam <[email protected]>

[ Upstream commit e000940473d1423a42ef9c823fb23ccffe3f07ea ]

This will avoid many uneccessary error logs when driver or firmware is in reset.

Fixes 230d1f0de754 ("bnxt_en: Handle firmware reset.")
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -1
index 63ee0c49be7cf..b5147bd6cba6d 100644
@@ -9992,7 +9992,7 @@ static void bnxt_timer(struct timer_list *t)
 	struct bnxt *bp = from_timer(bp, t, timer);
 	struct net_device *dev = bp->dev;
 
-	if (!netif_running(dev))
+	if (!netif_running(dev) || !test_bit(BNXT_STATE_OPEN, &bp->state))
 		return;
 
 	if (atomic_read(&bp->intr_sem) != 0)
Signature · 1 line
2.25.1
author maintainer
#275 lore raw

PATCH 275/314 scsi: ufs-bsg: Fix runtime PM imbalance on error

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit a1e17eb03e69bb61bd1b1a14610436b7b9be12d9 ]

When ufs_bsg_alloc_desc_buffer() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced.

Fixes 74e5e468b664 (scsi: ufs-bsg: Wake the device before sending raw upiu commands)
---
 drivers/scsi/ufs/ufs_bsg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufs_bsg.c +3 -1
index d2197a31abe58..bad366e491591 100644
@@ -106,8 +106,10 @@ static int ufs_bsg_request(struct bsg_job *job)
 		desc_op = bsg_request->upiu_req.qr.opcode;
 		ret = ufs_bsg_alloc_desc_buffer(hba, job, &desc_buff,
 						&desc_len, desc_op);
-		if (ret)
+		if (ret) {
+			pm_runtime_put_sync(hba->dev);
 			goto out;
+		}
 
 		/* fall through */
 	case UPIU_TRANSACTION_NOP_OUT:
Signature · 1 line
2.25.1
author maintainer
#276 lore raw

PATCH 276/314 block: Fix use-after-free in blkdev_get()

In reply to Greg Kroah-Hartman

From: Jason Yan <[email protected]>

[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]

In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio:

CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode

access bdev => use after free

[  459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[  459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[  459.352347]
[  459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[  459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  459.354947] Call Trace:
[  459.355337]  dump_stack+0x111/0x19e
[  459.355879]  ? __lock_acquire+0x24c1/0x31b0
[  459.356523]  print_address_description+0x60/0x223
[  459.357248]  ? __lock_acquire+0x24c1/0x31b0
[  459.357887]  kasan_report.cold+0xae/0x2d8
[  459.358503]  __lock_acquire+0x24c1/0x31b0
[  459.359120]  ? _raw_spin_unlock_irq+0x24/0x40
[  459.359784]  ? lockdep_hardirqs_on+0x37b/0x580
[  459.360465]  ? _raw_spin_unlock_irq+0x24/0x40
[  459.361123]  ? finish_task_switch+0x125/0x600
[  459.361812]  ? finish_task_switch+0xee/0x600
[  459.362471]  ? mark_held_locks+0xf0/0xf0
[  459.363108]  ? __schedule+0x96f/0x21d0
[  459.363716]  lock_acquire+0x111/0x320
[  459.364285]  ? blkdev_get+0xce/0xbe0
[  459.364846]  ? blkdev_get+0xce/0xbe0
[  459.365390]  __mutex_lock+0xf9/0x12a0
[  459.365948]  ? blkdev_get+0xce/0xbe0
[  459.366493]  ? bdev_evict_inode+0x1f0/0x1f0
[  459.367130]  ? blkdev_get+0xce/0xbe0
[  459.367678]  ? destroy_inode+0xbc/0x110
[  459.368261]  ? mutex_trylock+0x1a0/0x1a0
[  459.368867]  ? __blkdev_get+0x3e6/0x1280
[  459.369463]  ? bdev_disk_changed+0x1d0/0x1d0
[  459.370114]  ? blkdev_get+0xce/0xbe0
[  459.370656]  blkdev_get+0xce/0xbe0
[  459.371178]  ? find_held_lock+0x2c/0x110
[  459.371774]  ? __blkdev_get+0x1280/0x1280
[  459.372383]  ? lock_downgrade+0x680/0x680
[  459.373002]  ? lock_acquire+0x111/0x320
[  459.373587]  ? bd_acquire+0x21/0x2c0
[  459.374134]  ? do_raw_spin_unlock+0x4f/0x250
[  459.374780]  blkdev_open+0x202/0x290
[  459.375325]  do_dentry_open+0x49e/0x1050
[  459.375924]  ? blkdev_get_by_dev+0x70/0x70
[  459.376543]  ? __x64_sys_fchdir+0x1f0/0x1f0
[  459.377192]  ? inode_permission+0xbe/0x3a0
[  459.377818]  path_openat+0x148c/0x3f50
[  459.378392]  ? kmem_cache_alloc+0xd5/0x280
[  459.379016]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  459.379802]  ? path_lookupat.isra.0+0x900/0x900
[  459.380489]  ? __lock_is_held+0xad/0x140
[  459.381093]  do_filp_open+0x1a1/0x280
[  459.381654]  ? may_open_dev+0xf0/0xf0
[  459.382214]  ? find_held_lock+0x2c/0x110
[  459.382816]  ? lock_downgrade+0x680/0x680
[  459.383425]  ? __lock_is_held+0xad/0x140
[  459.384024]  ? do_raw_spin_unlock+0x4f/0x250
[  459.384668]  ? _raw_spin_unlock+0x1f/0x30
[  459.385280]  ? __alloc_fd+0x448/0x560
[  459.385841]  do_sys_open+0x3c3/0x500
[  459.386386]  ? filp_open+0x70/0x70
[  459.386911]  ? trace_hardirqs_on_thunk+0x1a/0x1c
[  459.387610]  ? trace_hardirqs_off_caller+0x55/0x1c0
[  459.388342]  ? do_syscall_64+0x1a/0x520
[  459.388930]  do_syscall_64+0xc3/0x520
[  459.389490]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  459.390248] RIP: 0033:0x416211
[  459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
   05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
      01
[  459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[  459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[  459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[  459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[  459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[  459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[  459.400168]
[  459.400430] Allocated by task 20132:
[  459.401038]  kasan_kmalloc+0xbf/0xe0
[  459.401652]  kmem_cache_alloc+0xd5/0x280
[  459.402330]  bdev_alloc_inode+0x18/0x40
[  459.402970]  alloc_inode+0x5f/0x180
[  459.403510]  iget5_locked+0x57/0xd0
[  459.404095]  bdget+0x94/0x4e0
[  459.404607]  bd_acquire+0xfa/0x2c0
[  459.405113]  blkdev_open+0x110/0x290
[  459.405702]  do_dentry_open+0x49e/0x1050
[  459.406340]  path_openat+0x148c/0x3f50
[  459.406926]  do_filp_open+0x1a1/0x280
[  459.407471]  do_sys_open+0x3c3/0x500
[  459.408010]  do_syscall_64+0xc3/0x520
[  459.408572]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  459.409415]
[  459.409679] Freed by task 1262:
[  459.410212]  __kasan_slab_free+0x129/0x170
[  459.410919]  kmem_cache_free+0xb2/0x2a0
[  459.411564]  rcu_process_callbacks+0xbb2/0x2320
[  459.412318]  __do_softirq+0x225/0x8ac

Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev.

Fixes 77ea887e433a ("implement in-kernel gendisk events handling")
Cc Christoph Hellwig <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Ming Lei <[email protected]>
Cc Jan Kara <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 fs/block_dev.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
fs/block_dev.c +7 -5
index 34644ce4b5025..2dc9c73a4cb29 100644
@@ -1546,10 +1546,8 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 	 */
 	if (!for_part) {
 		ret = devcgroup_inode_permission(bdev->bd_inode, perm);
-		if (ret != 0) {
-			bdput(bdev);
+		if (ret != 0)
 			return ret;
-		}
 	}
 
  restart:
@@ -1618,8 +1616,10 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 				goto out_clear;
 			BUG_ON(for_part);
 			ret = __blkdev_get(whole, mode, 1);
-			if (ret)
+			if (ret) {
+				bdput(whole);
 				goto out_clear;
+			}
 			bdev->bd_contains = whole;
 			bdev->bd_part = disk_get_part(disk, partno);
 			if (!(disk->flags & GENHD_FL_UP) ||
@@ -1669,7 +1669,6 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 	disk_unblock_events(disk);
 	put_disk_and_module(disk);
  out:
-	bdput(bdev);
 
 	return ret;
 }
@@ -1736,6 +1735,9 @@ int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder)
 		bdput(whole);
 	}
 
+	if (res)
+		bdput(bdev);
+
 	return res;
 }
 EXPORT_SYMBOL(blkdev_get);
Signature · 1 line
2.25.1
author maintainer
#277 lore raw

PATCH 277/314 mvpp2: remove module bugfix

In reply to Greg Kroah-Hartman

From: Sven Auhagen <[email protected]>

[ Upstream commit 807eaf99688ce162a98a7501477644782d4af098 ]

The remove function does not destroy all
BM Pools when per cpu pool is active.

When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new.

This eventually leads to a kernel crash.

v2:
* add Fixes tag

Fixes 7d04b0b13b11 ("mvpp2: percpu buffers")
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +5 -2
index 373b8c8328501..cf5d447af7db2 100644
@@ -5925,8 +5925,8 @@ static int mvpp2_remove(struct platform_device *pdev)
 {
 	struct mvpp2 *priv = platform_get_drvdata(pdev);
 	struct fwnode_handle *fwnode = pdev->dev.fwnode;
+	int i = 0, poolnum = MVPP2_BM_POOLS_NUM;
 	struct fwnode_handle *port_fwnode;
-	int i = 0;
 
 	mvpp2_dbgfs_cleanup(priv);
 
@@ -5940,7 +5940,10 @@ static int mvpp2_remove(struct platform_device *pdev)
 
 	destroy_workqueue(priv->stats_queue);
 
-	for (i = 0; i < MVPP2_BM_POOLS_NUM; i++) {
+	if (priv->percpu_pools)
+		poolnum = mvpp2_get_nrxqs(priv) * 2;
+
+	for (i = 0; i < poolnum; i++) {
 		struct mvpp2_bm_pool *bm_pool = &priv->bm_pools[i];
 
 		mvpp2_bm_pool_destroy(&pdev->dev, priv, bm_pool);
Signature · 1 line
2.25.1
author maintainer
#278 lore raw

PATCH 278/314 arm64: hw_breakpoint: Dont invoke overflow handler on uaccess watchpoints

In reply to Greg Kroah-Hartman

From: Will Deacon <[email protected]>

[ Upstream commit 24ebec25fb270100e252b19c288e21bd7d8cc7f7 ]

Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire unexpectedly if kernel debugging is enabled. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway.

Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed.

(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)

Cc Catalin Marinas <[email protected]>
Cc James Morse <[email protected]>
Fixes 57f4959bad0a ("arm64: kernel: Add support for User Access Override")
---
 arch/arm64/kernel/hw_breakpoint.c | 44 ++++++++++++++++++-------------
 1 file changed, 26 insertions(+), 18 deletions(-)
arch/arm64/kernel/hw_breakpoint.c +26 -18
index 38ee1514cd9cd..b4a1607958246 100644
@@ -730,6 +730,27 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
 		return 0;
 }
 
+static int watchpoint_report(struct perf_event *wp, unsigned long addr,
+			     struct pt_regs *regs)
+{
+	int step = is_default_overflow_handler(wp);
+	struct arch_hw_breakpoint *info = counter_arch_bp(wp);
+
+	info->trigger = addr;
+
+	/*
+	 * If we triggered a user watchpoint from a uaccess routine, then
+	 * handle the stepping ourselves since userspace really can't help
+	 * us with this.
+	 */
+	if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0)
+		step = 1;
+	else
+		perf_bp_event(wp, regs);
+
+	return step;
+}
+
 static int watchpoint_handler(unsigned long addr, unsigned int esr,
 			      struct pt_regs *regs)
 {
@@ -739,7 +760,6 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 	u64 val;
 	struct perf_event *wp, **slots;
 	struct debug_info *debug_info;
-	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
@@ -777,25 +797,13 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 		if (dist != 0)
 			continue;
 
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
-
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
+		step = watchpoint_report(wp, addr, regs);
 	}
-	if (min_dist > 0 && min_dist != -1) {
-		/* No exact match found. */
-		wp = slots[closest_match];
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
 
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
-	}
+	/* No exact match found? */
+	if (min_dist > 0 && min_dist != -1)
+		step = watchpoint_report(slots[closest_match], addr, regs);
+
 	rcu_read_unlock();
 
 	if (!step)
Signature · 1 line
2.25.1
author maintainer
#279 lore raw

PATCH 279/314 libata: Use per port sync for detach

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit b5292111de9bb70cba3489075970889765302136 ]

Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend.

Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency.

Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks.

Fixes 130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
---
 drivers/ata/libata-core.c | 11 +++++------
 include/linux/libata.h    |  3 +++
 2 files changed, 8 insertions(+), 6 deletions(-)
drivers/ata/libata-core.c +5 -6
index 581595b355736..35f75c691d7cf 100644
@@ -41,7 +41,6 @@
 #include <linux/workqueue.h>
 #include <linux/scatterlist.h>
 #include <linux/io.h>
-#include <linux/async.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
 #include <linux/glob.h>
@@ -6592,7 +6591,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	/* perform each probe asynchronously */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		async_schedule(async_port_probe, ap);
+		ap->cookie = async_schedule(async_port_probe, ap);
 	}
 
 	return 0;
@@ -6732,11 +6731,11 @@ void ata_host_detach(struct ata_host *host)
 {
 	int i;
 
-	/* Ensure ata_port probe has completed */
-	async_synchronize_full();
-
-	for (i = 0; i < host->n_ports; i++)
+	for (i = 0; i < host->n_ports; i++) {
+		/* Ensure ata_port probe has completed */
+		async_synchronize_cookie(host->ports[i]->cookie + 1);
 		ata_port_detach(host->ports[i]);
+	}
 
 	/* the host is dead now, dissociate ACPI */
 	ata_acpi_dissociate(host);
include/linux/libata.h +3 -0
index c44e4cfbcb16a..b9970f5bab67c 100644
@@ -22,6 +22,7 @@
 #include <linux/acpi.h>
 #include <linux/cdrom.h>
 #include <linux/sched.h>
+#include <linux/async.h>
 
 /*
  * Define if arch has non-standard setup.  This is a _PCI_ standard
@@ -870,6 +871,8 @@ struct ata_port {
 	struct timer_list	fastdrain_timer;
 	unsigned long		fastdrain_cnt;
 
+	async_cookie_t		cookie;
+
 	int			em_message_type;
 	void			*private_data;
 
Signature · 1 line
2.25.1
author maintainer
#280 lore raw

PATCH 280/314 drm: encoder_slave: fix refcouting error for modules

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

[ Upstream commit f78d4032de60f50fd4afaa0fb68ea03b985f820a ]

module_put() balances try_module_get(), not request_module(). Fix the error path to match that.

Fixes 2066facca4c7 ("drm/kms: slave encoder interface.")
---
 drivers/gpu/drm/drm_encoder_slave.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_encoder_slave.c +3 -2
index cf804389f5eca..d50a7884e69e1 100644
@@ -84,7 +84,7 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 
 	err = encoder_drv->encoder_init(client, dev, encoder);
 	if (err)
-		goto fail_unregister;
+		goto fail_module_put;
 
 	if (info->platform_data)
 		encoder->slave_funcs->set_config(&encoder->base,
@@ -92,9 +92,10 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 
 	return 0;
 
+fail_module_put:
+	module_put(module);
 fail_unregister:
 	i2c_unregister_device(client);
-	module_put(module);
 fail:
 	return err;
 }
Signature · 1 line
2.25.1
author maintainer
#281 lore raw

PATCH 281/314 ext4: fix partial cluster initialization when splitting extent

In reply to Greg Kroah-Hartman

From: Jeffle Xu <[email protected]>

commit cfb3c85a600c6aa25a2581b3c1c4db3460f14e46 upstream.

Fix the bug when calculating the physical block number of the first block in the split extent.

This bug will cause xfstests shared/298 failure on ext4 with bigalloc enabled occasionally. Ext4 error messages indicate that previously freed blocks are being freed again, and the following fsck will fail due to the inconsistency of block bitmap and bg descriptor.

The following is an example case:

1. First, Initialize a ext4 filesystem with cluster size '16K', block size '4K', in which case, one cluster contains four blocks.

2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent tree of this file is like:

...
36864:[0]4:220160
36868:[0]14332:145408
51200:[0]2:231424
...

3. Then execute PUNCH_HOLE fallocate on this file. The hole range is like:

..
ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1
...

4. Then the extent tree of this file after punching is like

...
49507:[0]37:158047
49547:[0]58:158087
...

5. Detailed procedure of punching hole [49544, 49546]

5.1. The block address space:

```
lblk        ~49505  49506   49507~49543     49544~49546    49547~
	  ---------+------+-------------+----------------+--------
	    extent | hole |   extent	|	hole	 | extent
	  ---------+------+-------------+----------------+--------
pblk       ~158045  158046  158047~158083  158084~158086   158087~
```

5.2. The detailed layout of cluster 39521:

```
		cluster 39521
	<------------------------------->

		hole		  extent
	<----------------------><--------

lblk      49544   49545   49546   49547
	+-------+-------+-------+-------+
	|	|	|	|	|
	+-------+-------+-------+-------+
pblk     158084  1580845  158086  158087
```

5.3. The ftrace output when punching hole [49544, 49546]:
- ext4_ext_remove_space (start 49544, end 49546)
- ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2])
- ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2]
- ext4_free_blocks: (block 158084 count 4)
- ext4_mballoc_free (extent 1/6753/1)

5.4. Ext4 error message in dmesg:
EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt. EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters

In this case, the whole cluster 39521 is freed mistakenly when freeing pblock 158084~158086 (i.e., the first three blocks of this cluster), although pblock 158087 (the last remaining block of this cluster) has not been freed yet.

The root cause of this isuue is that, the pclu of the partial cluster is calculated mistakenly in ext4_ext_remove_space(). The correct partial_cluster.pclu (i.e., the cluster number of the first block in the next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather than 39522.

---
 fs/ext4/extents.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/extents.c +1 -1
@@ -3010,7 +3010,7 @@ again:
 			 * in use to avoid freeing it when removing blocks.
 			 */
 			if (sbi->s_cluster_ratio > 1) {
-				pblk = ext4_ext_pblock(ex) + end - ee_block + 2;
+				pblk = ext4_ext_pblock(ex) + end - ee_block + 1;
 				partial.pclu = EXT4_B2C(sbi, pblk);
 				partial.state = nofree;
 			}
author maintainer
#282 lore raw

PATCH 282/314 ext4: avoid utf8_strncasecmp() with unstable name

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 2ce3ee931a097e9720310db3f09c01c825a4580c upstream.

If the dentry name passed to ->d_compare() fits in dentry::d_iname, then it may be concurrently modified by a rename. This can cause undefined behavior (possibly out-of-bounds memory accesses or crashes) in utf8_strncasecmp(), since fs/unicode/ isn't written to handle strings that may be concurrently modified.

Fix this by first copying the filename to a stack buffer if needed. This way we get a stable snapshot of the filename.

Fixes b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc <[email protected]> # v5.2+
Cc Al Viro <[email protected]>
Cc Daniel Rosenberg <[email protected]>
Cc Gabriel Krisman Bertazi <[email protected]>
---
 fs/ext4/dir.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)
fs/ext4/dir.c +16 -0
@@ -677,6 +677,7 @@ static int ext4_d_compare(const struct d
 	struct qstr qstr = {.name = str, .len = len };
 	const struct dentry *parent = READ_ONCE(dentry->d_parent);
 	const struct inode *inode = READ_ONCE(parent->d_inode);
+	char strbuf[DNAME_INLINE_LEN];
 
 	if (!inode || !IS_CASEFOLDED(inode) ||
 	    !EXT4_SB(inode->i_sb)->s_encoding) {
@@ -685,6 +686,21 @@ static int ext4_d_compare(const struct d
 		return memcmp(str, name->name, len);
 	}
 
+	/*
+	 * If the dentry name is stored in-line, then it may be concurrently
+	 * modified by a rename.  If this happens, the VFS will eventually retry
+	 * the lookup, so it doesn't matter what ->d_compare() returns.
+	 * However, it's unsafe to call utf8_strncasecmp() with an unstable
+	 * string.  Therefore, we have to copy the name into a temporary buffer.
+	 */
+	if (len <= DNAME_INLINE_LEN - 1) {
+		memcpy(strbuf, str, len);
+		strbuf[len] = 0;
+		qstr.name = strbuf;
+		/* prevent compiler from optimizing out the temporary buffer */
+		barrier();
+	}
+
 	return ext4_ci_compare(inode, name, &qstr, false);
 }
 
author maintainer
#283 lore raw

PATCH 283/314 drm/dp_mst: Reformat drm_dp_check_act_status() a bit

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

commit a5cb5fa6c3a5c2cf492db667b8670ee7b044b79f upstream.

Just add a bit more line wrapping, get rid of some extraneous whitespace, remove an unneeded goto label, and move around some variable declarations. No functional changes here.

[this isn't a fix, but it's needed for the fix that comes after this]
Fixes ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc Sean Paul <[email protected]>
Cc <[email protected]> # v3.17+
---
 drivers/gpu/drm/drm_dp_mst_topology.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +10 -12
@@ -3507,33 +3507,31 @@ fail:
  */
 int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr)
 {
+	int count = 0, ret;
 	u8 status;
-	int ret;
-	int count = 0;
 
 	do {
-		ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
-
+		ret = drm_dp_dpcd_readb(mgr->aux,
+					DP_PAYLOAD_TABLE_UPDATE_STATUS,
+					&status);
 		if (ret < 0) {
-			DRM_DEBUG_KMS("failed to read payload table status %d\n", ret);
-			goto fail;
+			DRM_DEBUG_KMS("failed to read payload table status %d\n",
+				      ret);
+			return ret;
 		}
 
 		if (status & DP_PAYLOAD_ACT_HANDLED)
 			break;
 		count++;
 		udelay(100);
-
 	} while (count < 30);
 
 	if (!(status & DP_PAYLOAD_ACT_HANDLED)) {
-		DRM_DEBUG_KMS("failed to get ACT bit %d after %d retries\n", status, count);
-		ret = -EINVAL;
-		goto fail;
+		DRM_DEBUG_KMS("failed to get ACT bit %d after %d retries\n",
+			      status, count);
+		return -EINVAL;
 	}
 	return 0;
-fail:
-	return ret;
 }
 EXPORT_SYMBOL(drm_dp_check_act_status);
 
author maintainer
#284 lore raw

PATCH 284/314 drm/qxl: Use correct notify port address when creating cursor ring

In reply to Greg Kroah-Hartman

From: Huacai Chen <[email protected]>

commit 80e5f89da3ab949fbbf1cae01dfaea29f5483a75 upstream.

The command ring and cursor ring use different notify port addresses
definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring and cursor ring. This doesn't cause any problems now, because QEMU's behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same. However, QEMU's behavior may be change in future, so let's fix it.

P.S.: In the X.org QXL driver, the notify port address of cursor ring
is correct.

---
 drivers/gpu/drm/qxl/qxl_kms.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/qxl/qxl_kms.c +1 -1
@@ -218,7 +218,7 @@ int qxl_device_init(struct qxl_device *q
 				&(qdev->ram_header->cursor_ring_hdr),
 				sizeof(struct qxl_command),
 				QXL_CURSOR_RING_SIZE,
-				qdev->io_base + QXL_IO_NOTIFY_CMD,
+				qdev->io_base + QXL_IO_NOTIFY_CURSOR,
 				false,
 				&qdev->cursor_event);
 
author maintainer
#285 lore raw

PATCH 285/314 drm/amdgpu: Replace invalid device ID with a valid device ID

In reply to Greg Kroah-Hartman

From: Sandeep Raghuraman <[email protected]>

commit 790243d3bf78f9830a3b2ffbca1ed0f528295d48 upstream.

Initializes Powertune data for a specific Hawaii card by fixing what looks like a typo in the code. The device ID 66B1 is not a supported device ID for this driver, and is not mentioned elsewhere. 67B1 is a valid device ID, and is a Hawaii Pro GPU.

I have tested on my R9 390 which has device ID 67B1, and it works fine without problems.

---
 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c +1 -1
@@ -239,7 +239,7 @@ static void ci_initialize_power_tune_def
 
 	switch (dev_id) {
 	case 0x67BA:
-	case 0x66B1:
+	case 0x67B1:
 		smu_data->power_tune_defaults = &defaults_hawaii_pro;
 		break;
 	case 0x67B8:
author maintainer
#286 lore raw

PATCH 286/314 selinux: fix double free

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

commit 65de50969a77509452ae590e9449b70a22b923bb upstream.

Clang's static analysis tool reports these double free memory errors.

security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc]

                        kfree(bnames[i]);
                        ^~~~~~~~~~~~~~~~
security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc]
        kfree(bvalues);
        ^~~~~~~~~~~~~~

So improve the security_get_bools error handling by freeing these variables and setting their return pointers to NULL and the return len to 0

---
 security/selinux/ss/services.c |    4 ++++
 1 file changed, 4 insertions(+)
security/selinux/ss/services.c +4 -0
@@ -2844,8 +2844,12 @@ err:
 	if (*names) {
 		for (i = 0; i < *len; i++)
 			kfree((*names)[i]);
+		kfree(*names);
 	}
 	kfree(*values);
+	*len = 0;
+	*names = NULL;
+	*values = NULL;
 	goto out;
 }
 
author maintainer
#287 lore raw

PATCH 287/314 jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()

In reply to Greg Kroah-Hartman

From: zhangyi (F) <[email protected]>

[ Upstream commit 7f6225e446cc8dfa4c3c7959a4de3dd03ec277bf ]

__jbd2_journal_abort_hard() is no longer used, so now we can merge __jbd2_journal_abort_hard() and __journal_abort_soft() these two functions into jbd2_journal_abort() and remove them.

---
 fs/jbd2/journal.c    | 103 ++++++++++++++++++-------------------------
 include/linux/jbd2.h |   1 -
 2 files changed, 42 insertions(+), 62 deletions(-)
fs/jbd2/journal.c +42 -61
index c1ce2805c5639..fa58835668a62 100644
@@ -96,7 +96,6 @@ EXPORT_SYMBOL(jbd2_journal_release_jbd_inode);
 EXPORT_SYMBOL(jbd2_journal_begin_ordered_truncate);
 EXPORT_SYMBOL(jbd2_inode_cache);
 
-static void __journal_abort_soft (journal_t *journal, int errno);
 static int jbd2_journal_create_slab(size_t slab_size);
 
 #ifdef CONFIG_JBD2_DEBUG
@@ -805,7 +804,7 @@ int jbd2_journal_bmap(journal_t *journal, unsigned long blocknr,
 					"at offset %lu on %s\n",
 			       __func__, blocknr, journal->j_devname);
 			err = -EIO;
-			__journal_abort_soft(journal, err);
+			jbd2_journal_abort(journal, err);
 		}
 	} else {
 		*retp = blocknr; /* +journal->j_blk_offset */
@@ -2070,64 +2069,6 @@ int jbd2_journal_wipe(journal_t *journal, int write)
 	return err;
 }
 
-/*
- * Journal abort has very specific semantics, which we describe
- * for journal abort.
- *
- * Two internal functions, which provide abort to the jbd layer
- * itself are here.
- */
-
-/*
- * Quick version for internal journal use (doesn't lock the journal).
- * Aborts hard --- we mark the abort as occurred, but do _nothing_ else,
- * and don't attempt to make any other journal updates.
- */
-void __jbd2_journal_abort_hard(journal_t *journal)
-{
-	transaction_t *transaction;
-
-	if (journal->j_flags & JBD2_ABORT)
-		return;
-
-	printk(KERN_ERR "Aborting journal on device %s.\n",
-	       journal->j_devname);
-
-	write_lock(&journal->j_state_lock);
-	journal->j_flags |= JBD2_ABORT;
-	transaction = journal->j_running_transaction;
-	if (transaction)
-		__jbd2_log_start_commit(journal, transaction->t_tid);
-	write_unlock(&journal->j_state_lock);
-}
-
-/* Soft abort: record the abort error status in the journal superblock,
- * but don't do any other IO. */
-static void __journal_abort_soft (journal_t *journal, int errno)
-{
-	int old_errno;
-
-	write_lock(&journal->j_state_lock);
-	old_errno = journal->j_errno;
-	if (!journal->j_errno || errno == -ESHUTDOWN)
-		journal->j_errno = errno;
-
-	if (journal->j_flags & JBD2_ABORT) {
-		write_unlock(&journal->j_state_lock);
-		if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN)
-			jbd2_journal_update_sb_errno(journal);
-		return;
-	}
-	write_unlock(&journal->j_state_lock);
-
-	__jbd2_journal_abort_hard(journal);
-
-	jbd2_journal_update_sb_errno(journal);
-	write_lock(&journal->j_state_lock);
-	journal->j_flags |= JBD2_REC_ERR;
-	write_unlock(&journal->j_state_lock);
-}
-
 /**
  * void jbd2_journal_abort () - Shutdown the journal immediately.
  * @journal: the journal to shutdown.
@@ -2171,7 +2112,47 @@ static void __journal_abort_soft (journal_t *journal, int errno)
 
 void jbd2_journal_abort(journal_t *journal, int errno)
 {
-	__journal_abort_soft(journal, errno);
+	transaction_t *transaction;
+
+	/*
+	 * ESHUTDOWN always takes precedence because a file system check
+	 * caused by any other journal abort error is not required after
+	 * a shutdown triggered.
+	 */
+	write_lock(&journal->j_state_lock);
+	if (journal->j_flags & JBD2_ABORT) {
+		int old_errno = journal->j_errno;
+
+		write_unlock(&journal->j_state_lock);
+		if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN) {
+			journal->j_errno = errno;
+			jbd2_journal_update_sb_errno(journal);
+		}
+		return;
+	}
+
+	/*
+	 * Mark the abort as occurred and start current running transaction
+	 * to release all journaled buffer.
+	 */
+	pr_err("Aborting journal on device %s.\n", journal->j_devname);
+
+	journal->j_flags |= JBD2_ABORT;
+	journal->j_errno = errno;
+	transaction = journal->j_running_transaction;
+	if (transaction)
+		__jbd2_log_start_commit(journal, transaction->t_tid);
+	write_unlock(&journal->j_state_lock);
+
+	/*
+	 * Record errno to the journal super block, so that fsck and jbd2
+	 * layer could realise that a filesystem check is needed.
+	 */
+	jbd2_journal_update_sb_errno(journal);
+
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_REC_ERR;
+	write_unlock(&journal->j_state_lock);
 }
 
 /**
include/linux/jbd2.h +0 -1
index 10e6049c0ba91..b0e97e5de8ca4 100644
@@ -1402,7 +1402,6 @@ extern int	   jbd2_journal_skip_recovery	(journal_t *);
 extern void	   jbd2_journal_update_sb_errno(journal_t *);
 extern int	   jbd2_journal_update_sb_log_tail	(journal_t *, tid_t,
 				unsigned long, int);
-extern void	   __jbd2_journal_abort_hard	(journal_t *);
 extern void	   jbd2_journal_abort      (journal_t *, int);
 extern int	   jbd2_journal_errno      (journal_t *);
 extern void	   jbd2_journal_ack_err    (journal_t *);
Signature · 1 line
2.25.1
author maintainer
#288 lore raw

PATCH 288/314 ext4: avoid race conditions when remounting with options that change dax

In reply to Greg Kroah-Hartman

From: Theodore Ts'o <[email protected]>

[ Upstream commit 829b37b8cddb1db75c1b7905505b90e593b15db1 ]

Trying to change dax mount options when remounting could allow mount options to be enabled for a small amount of time, and then the mount option change would be reverted.

In the case of "mount -o remount,dax", this can cause a race where files would temporarily treated as DAX --- and then not.

---
 fs/ext4/super.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)
fs/ext4/super.c +10 -12
index 830160ad07a63..f7c20bb20da37 100644
@@ -2034,6 +2034,16 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token,
 #endif
 	} else if (token == Opt_dax) {
 #ifdef CONFIG_FS_DAX
+		if (is_remount && test_opt(sb, DAX)) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				"both data=journal and dax");
+			return -1;
+		}
+		if (is_remount && !(sbi->s_mount_opt & EXT4_MOUNT_DAX)) {
+			ext4_msg(sb, KERN_ERR, "can't change "
+					"dax mount option while remounting");
+			return -1;
+		}
 		ext4_msg(sb, KERN_WARNING,
 		"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
 		sbi->s_mount_opt |= m->mount_opt;
@@ -5367,12 +5377,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			err = -EINVAL;
 			goto restore_opts;
 		}
-		if (test_opt(sb, DAX)) {
-			ext4_msg(sb, KERN_ERR, "can't mount with "
-				 "both data=journal and dax");
-			err = -EINVAL;
-			goto restore_opts;
-		}
 	} else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA) {
 		if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
 			ext4_msg(sb, KERN_ERR, "can't mount with "
@@ -5388,12 +5392,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		goto restore_opts;
 	}
 
-	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX) {
-		ext4_msg(sb, KERN_WARNING, "warning: refusing change of "
-			"dax flag with busy inodes while remounting");
-		sbi->s_mount_opt ^= EXT4_MOUNT_DAX;
-	}
-
 	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
 		ext4_abort(sb, "Abort forced by user");
 
Signature · 1 line
2.25.1
author maintainer
#289 lore raw

PATCH 289/314 drm/dp_mst: Increase ACT retry timeout to 3s

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

[ Upstream commit 873a95e0d59ac06901ae261dda0b7165ffd002b8 ]

Currently we only poll for an ACT up to 30 times, with a busy-wait delay of 100µs between each attempt - giving us a timeout of 2900µs. While this might seem sensible, it would appear that in certain scenarios it can take dramatically longer then that for us to receive an ACT. On one of the EVGA MST hubs that I have available, I observed said hub sometimes taking longer then a second before signalling the ACT. These delays mostly seem to occur when previous sideband messages we've sent are NAKd by the hub, however it wouldn't be particularly surprising if it's possible to reproduce times like this simply by introducing branch devices with large LCTs since payload allocations have to take effect on every downstream device up to the payload's target.

So, instead of just retrying 30 times we poll for the ACT for up to 3ms, and additionally use usleep_range() to avoid a very long and rude busy-wait. Note that the previous retry count of 30 appears to have been arbitrarily chosen, as I can't find any mention of a recommended timeout or retry count for ACTs in the DisplayPort 2.0 specification. This also goes for the range we were previously using for udelay(), although I suspect that was just copied from the recommended delay for link training on SST devices.

Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul

Fixes ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc Sean Paul <[email protected]>
Cc <[email protected]> # v3.17+
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 54 ++++++++++++++++-----------
 1 file changed, 32 insertions(+), 22 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +32 -22
index 313ca06a4fcb4..006d6087700fb 100644
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
+#include <linux/iopoll.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -3498,6 +3499,17 @@ static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
 	return ret;
 }
 
+static int do_get_act_status(struct drm_dp_aux *aux)
+{
+	int ret;
+	u8 status;
+
+	ret = drm_dp_dpcd_readb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	return status;
+}
 
 /**
  * drm_dp_check_act_status() - Check ACT handled status.
@@ -3507,30 +3519,28 @@ static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
  */
 int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr)
 {
-	int count = 0, ret;
-	u8 status;
-
-	do {
-		ret = drm_dp_dpcd_readb(mgr->aux,
-					DP_PAYLOAD_TABLE_UPDATE_STATUS,
-					&status);
-		if (ret < 0) {
-			DRM_DEBUG_KMS("failed to read payload table status %d\n",
-				      ret);
-			return ret;
-		}
-
-		if (status & DP_PAYLOAD_ACT_HANDLED)
-			break;
-		count++;
-		udelay(100);
-	} while (count < 30);
-
-	if (!(status & DP_PAYLOAD_ACT_HANDLED)) {
-		DRM_DEBUG_KMS("failed to get ACT bit %d after %d retries\n",
-			      status, count);
+	/*
+	 * There doesn't seem to be any recommended retry count or timeout in
+	 * the MST specification. Since some hubs have been observed to take
+	 * over 1 second to update their payload allocations under certain
+	 * conditions, we use a rather large timeout value.
+	 */
+	const int timeout_ms = 3000;
+	int ret, status;
+
+	ret = readx_poll_timeout(do_get_act_status, mgr->aux, status,
+				 status & DP_PAYLOAD_ACT_HANDLED || status < 0,
+				 200, timeout_ms * USEC_PER_MSEC);
+	if (ret < 0 && status >= 0) {
+		DRM_DEBUG_KMS("Failed to get ACT after %dms, last status: %02x\n",
+			      timeout_ms, status);
 		return -EINVAL;
+	} else if (status < 0) {
+		DRM_DEBUG_KMS("Failed to read payload table status: %d\n",
+			      status);
+		return status;
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(drm_dp_check_act_status);
Signature · 1 line
2.25.1
author maintainer
#290 lore raw

PATCH 290/314 drm/amd/display: Use swap() where appropriate

In reply to Greg Kroah-Hartman

From: Ville Syrjälä <[email protected]>

[ Upstream commit 34b86b75dfc90ab3d996c224314ce51772a3b351 ]

Mostly a cocci-job, but it flat out refused to remove the declaration in drivers/gpu/drm/amd/display/dc/core/dc.c so had to do that part manually.

@swap@
identifier TEMP;
expression A,B;
@@
- TEMP = A;
- A = B;
- B = TEMP;
+ swap(A, B);

@@
type T;
identifier swap.TEMP;
@@
(
- T TEMP;
|
- T TEMP = {...};
)
... when != TEMP

---
 drivers/gpu/drm/amd/display/dc/bios/bios_parser.c  | 7 ++-----
 drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 8 ++------
 drivers/gpu/drm/amd/display/dc/core/dc.c           | 6 +-----
 3 files changed, 5 insertions(+), 16 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +2 -5
index 221e0f56389f3..823843cd26133 100644
@@ -2543,7 +2543,6 @@ static enum bp_result construct_integrated_info(
 
 	/* Sort voltage table from low to high*/
 	if (result == BP_RESULT_OK) {
-		struct clock_voltage_caps temp = {0, 0};
 		uint32_t i;
 		uint32_t j;
 
@@ -2553,10 +2552,8 @@ static enum bp_result construct_integrated_info(
 						info->disp_clk_voltage[j].max_supported_clk <
 						info->disp_clk_voltage[j-1].max_supported_clk) {
 					/* swap j and j - 1*/
-					temp = info->disp_clk_voltage[j-1];
-					info->disp_clk_voltage[j-1] =
-							info->disp_clk_voltage[j];
-					info->disp_clk_voltage[j] = temp;
+					swap(info->disp_clk_voltage[j - 1],
+					     info->disp_clk_voltage[j]);
 				}
 			}
 		}
drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +2 -6
index dff65c0fe82f8..7873abea4112b 100644
@@ -1613,8 +1613,6 @@ static enum bp_result construct_integrated_info(
 
 	struct atom_common_table_header *header;
 	struct atom_data_revision revision;
-
-	struct clock_voltage_caps temp = {0, 0};
 	uint32_t i;
 	uint32_t j;
 
@@ -1644,10 +1642,8 @@ static enum bp_result construct_integrated_info(
 				info->disp_clk_voltage[j-1].max_supported_clk
 				) {
 				/* swap j and j - 1*/
-				temp = info->disp_clk_voltage[j-1];
-				info->disp_clk_voltage[j-1] =
-					info->disp_clk_voltage[j];
-				info->disp_clk_voltage[j] = temp;
+				swap(info->disp_clk_voltage[j - 1],
+				     info->disp_clk_voltage[j]);
 			}
 		}
 	}
drivers/gpu/drm/amd/display/dc/core/dc.c +1 -5
index b95a58aa82d91..47e7d11ca0c9c 100644
@@ -907,15 +907,11 @@ static void program_timing_sync(
 
 		/* set first pipe with plane as master */
 		for (j = 0; j < group_size; j++) {
-			struct pipe_ctx *temp;
-
 			if (pipe_set[j]->plane_state) {
 				if (j == 0)
 					break;
 
-				temp = pipe_set[0];
-				pipe_set[0] = pipe_set[j];
-				pipe_set[j] = temp;
+				swap(pipe_set[0], pipe_set[j]);
 				break;
 			}
 		}
Signature · 1 line
2.25.1
author maintainer
#291 lore raw

PATCH 291/314 x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

commit bc310baf2ba381c648983c7f4748327f17324562 upstream.

The final build stage of the x86 kernel captures some symbol addresses from the decompressor binary and copies them into zoffset.h. It uses sed with a regular expression that matches the address, symbol type and symbol name, and mangles the captured addresses and the names of symbols of interest into #define directives that are added to zoffset.h

The symbol type is indicated by a single letter, which we match
strictly: only letters in the set 'ABCDGRSTVW' are matched, even though the actual symbol type is relevant and therefore ignored.

Commit bc7c9d620 ("efi/libstub/x86: Force 'hidden' visibility for extern declarations") made a change to the way external symbol references are classified, resulting in 'startup_32' now being emitted as a hidden symbol. This prevents the use of GOT entries to refer to this symbol via its absolute address, which recent toolchains (including Clang based ones) already avoid by default, making this change a no-op in the majority of cases.

However, as it turns out, the LLVM linker classifies such hidden symbols as symbols with static linkage in fully linked ELF binaries, causing tools such as NM to output a lowercase 't' rather than an upper case 'T' for the type of such symbols. Since our sed expression only matches upper case letters for the symbol type, the line describing startup_32 is disregarded, resulting in a build error like the following

arch/x86/boot/header.S:568:18: error: symbol 'ZO_startup_32' can not be
undefined in a subtraction expression
init_size: .long (0x00000000008fd000 - ZO_startup_32 +
(((0x0000000001f6361c + ((0x0000000001f6361c >> 8) + 65536)
- 0x00000000008c32e5) + 4095) & ~4095)) # kernel initialization size

Given that we are only interested in the value of the symbol, let's match any character in the set 'a-zA-Z' instead.

---
 arch/x86/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/boot/Makefile +1 -1
index e2839b5c246c2..6539c50fb9aae 100644
@@ -87,7 +87,7 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 
 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p'
 
 quiet_cmd_zoffset = ZOFFSET $@
       cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
Signature · 1 line
2.25.1
author maintainer
#292 lore raw

PATCH 292/314 block: nr_sects_write(): Disable preemption on seqcount write

In reply to Greg Kroah-Hartman

From: Ahmed S. Darwish <[email protected]>

[ Upstream commit 15b81ce5abdc4b502aa31dff2d415b79d2349d2f ]

For optimized block readers not holding a mutex, the "number of sectors" 64-bit value is protected from tearing on 32-bit architectures by a sequence counter.

Disable preemption before entering that sequence counter's write side critical section. Otherwise, the read side can preempt the write side section and spin for the entire scheduler tick. If the reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock.

Fixes c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl")
---
 include/linux/genhd.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/genhd.h +2 -0
index 8b5330dd5ac09..62a2ec9f17df8 100644
@@ -750,9 +750,11 @@ static inline sector_t part_nr_sects_read(struct hd_struct *part)
 static inline void part_nr_sects_write(struct hd_struct *part, sector_t size)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	preempt_disable();
 	write_seqcount_begin(&part->nr_sects_seq);
 	part->nr_sects = size;
 	write_seqcount_end(&part->nr_sects_seq);
+	preempt_enable();
 #elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
 	preempt_disable();
 	part->nr_sects = size;
Signature · 1 line
2.25.1
author maintainer
#293 lore raw

PATCH 293/314 net/mlx5: DR, Fix freeing in dr_create_rc_qp()

In reply to Greg Kroah-Hartman

From: Denis Efremov <[email protected]>

[ Upstream commit 47a357de2b6b706af3c9471d5042f9ba8907031e ]

Variable "in" in dr_create_rc_qp() is allocated with kvzalloc() and should be freed with kvfree().

Fixes 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
---
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c +1 -1
index 7c77378accf04..f012aac83b10e 100644
@@ -181,7 +181,7 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev,
 							 in, pas));
 
 	err = mlx5_core_create_qp(mdev, &dr_qp->mqp, in, inlen);
-	kfree(in);
+	kvfree(in);
 
 	if (err) {
 		mlx5_core_warn(mdev, " Can't create QP\n");
Signature · 1 line
2.25.1
author maintainer
#294 lore raw

PATCH 294/314 f2fs: split f2fs_d_compare() from f2fs_match_name()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit f874fa1c7c7905c1744a2037a11516558ed00a81 ]

Sharing f2fs_ci_compare() between comparing cached dentries (f2fs_d_compare()) and comparing on-disk dentries (f2fs_match_name()) doesn't work as well as intended, as these actions fundamentally differ in several ways (e.g. whether the task may sleep, whether the directory is stable, whether the casefolded name was precomputed, whether the dentry will need to be decrypted once we allow casefold+encrypt, etc.)

Just make f2fs_d_compare() implement what it needs directly, and rework f2fs_ci_compare() to be specialized for f2fs_match_name().

---
 fs/f2fs/dir.c  | 70 +++++++++++++++++++++++++-------------------------
 fs/f2fs/f2fs.h |  5 ----
 2 files changed, 35 insertions(+), 40 deletions(-)
fs/f2fs/dir.c +35 -35
index 84280ad3786c3..594c9ad774d23 100644
@@ -107,36 +107,28 @@ static struct f2fs_dir_entry *find_in_block(struct inode *dir,
 /*
  * Test whether a case-insensitive directory entry matches the filename
  * being searched for.
- *
- * Returns: 0 if the directory entry matches, more than 0 if it
- * doesn't match or less than zero on error.
  */
-int f2fs_ci_compare(const struct inode *parent, const struct qstr *name,
-				const struct qstr *entry, bool quick)
+static bool f2fs_match_ci_name(const struct inode *dir, const struct qstr *name,
+			       const struct qstr *entry, bool quick)
 {
-	const struct f2fs_sb_info *sbi = F2FS_SB(parent->i_sb);
+	const struct f2fs_sb_info *sbi = F2FS_SB(dir->i_sb);
 	const struct unicode_map *um = sbi->s_encoding;
-	int ret;
+	int res;
 
 	if (quick)
-		ret = utf8_strncasecmp_folded(um, name, entry);
+		res = utf8_strncasecmp_folded(um, name, entry);
 	else
-		ret = utf8_strncasecmp(um, name, entry);
-
-	if (ret < 0) {
-		/* Handle invalid character sequence as either an error
-		 * or as an opaque byte sequence.
+		res = utf8_strncasecmp(um, name, entry);
+	if (res < 0) {
+		/*
+		 * In strict mode, ignore invalid names.  In non-strict mode,
+		 * fall back to treating them as opaque byte sequences.
 		 */
-		if (f2fs_has_strict_mode(sbi))
-			return -EINVAL;
-
-		if (name->len != entry->len)
-			return 1;
-
-		return !!memcmp(name->name, entry->name, name->len);
+		if (f2fs_has_strict_mode(sbi) || name->len != entry->len)
+			return false;
+		return !memcmp(name->name, entry->name, name->len);
 	}
-
-	return ret;
+	return res == 0;
 }
 
 static void f2fs_fname_setup_ci_filename(struct inode *dir,
@@ -188,10 +180,10 @@ static inline bool f2fs_match_name(struct f2fs_dentry_ptr *d,
 		if (cf_str->name) {
 			struct qstr cf = {.name = cf_str->name,
 					  .len = cf_str->len};
-			return !f2fs_ci_compare(parent, &cf, &entry, true);
+			return f2fs_match_ci_name(parent, &cf, &entry, true);
 		}
-		return !f2fs_ci_compare(parent, fname->usr_fname, &entry,
-					false);
+		return f2fs_match_ci_name(parent, fname->usr_fname, &entry,
+					  false);
 	}
 #endif
 	if (fscrypt_match_name(fname, d->filename[bit_pos],
@@ -1067,17 +1059,25 @@ const struct file_operations f2fs_dir_operations = {
 static int f2fs_d_compare(const struct dentry *dentry, unsigned int len,
 			  const char *str, const struct qstr *name)
 {
-	struct qstr qstr = {.name = str, .len = len };
 	const struct dentry *parent = READ_ONCE(dentry->d_parent);
-	const struct inode *inode = READ_ONCE(parent->d_inode);
-
-	if (!inode || !IS_CASEFOLDED(inode)) {
-		if (len != name->len)
-			return -1;
-		return memcmp(str, name->name, len);
-	}
-
-	return f2fs_ci_compare(inode, name, &qstr, false);
+	const struct inode *dir = READ_ONCE(parent->d_inode);
+	const struct f2fs_sb_info *sbi = F2FS_SB(dentry->d_sb);
+	struct qstr entry = QSTR_INIT(str, len);
+	int res;
+
+	if (!dir || !IS_CASEFOLDED(dir))
+		goto fallback;
+
+	res = utf8_strncasecmp(sbi->s_encoding, name, &entry);
+	if (res >= 0)
+		return res;
+
+	if (f2fs_has_strict_mode(sbi))
+		return -EINVAL;
+fallback:
+	if (len != name->len)
+		return 1;
+	return !!memcmp(str, name->name, len);
 }
 
 static int f2fs_d_hash(const struct dentry *dentry, struct qstr *str)
fs/f2fs/f2fs.h +0 -5
index c22ca7d867ee5..03693d6b1c104 100644
@@ -2954,11 +2954,6 @@ int f2fs_update_extension_list(struct f2fs_sb_info *sbi, const char *name,
 							bool hot, bool set);
 struct dentry *f2fs_get_parent(struct dentry *child);
 
-extern int f2fs_ci_compare(const struct inode *parent,
-			   const struct qstr *name,
-			   const struct qstr *entry,
-			   bool quick);
-
 /*
  * dir.c
  */
Signature · 1 line
2.25.1
author maintainer
#295 lore raw

PATCH 295/314 f2fs: avoid utf8_strncasecmp() with unstable name

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit fc3bb095ab02b9e7d89a069ade2cead15c64c504 ]

If the dentry name passed to ->d_compare() fits in dentry::d_iname, then it may be concurrently modified by a rename. This can cause undefined behavior (possibly out-of-bounds memory accesses or crashes) in utf8_strncasecmp(), since fs/unicode/ isn't written to handle strings that may be concurrently modified.

Fix this by first copying the filename to a stack buffer if needed. This way we get a stable snapshot of the filename.

Fixes 2c2eb7a300cd ("f2fs: Support case-insensitive file name lookups")
Cc <[email protected]> # v5.4+
Cc Al Viro <[email protected]>
Cc Daniel Rosenberg <[email protected]>
Cc Gabriel Krisman Bertazi <[email protected]>
---
 fs/f2fs/dir.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
fs/f2fs/dir.c +16 -0
index 594c9ad774d23..e9af46dc06f72 100644
@@ -1063,11 +1063,27 @@ static int f2fs_d_compare(const struct dentry *dentry, unsigned int len,
 	const struct inode *dir = READ_ONCE(parent->d_inode);
 	const struct f2fs_sb_info *sbi = F2FS_SB(dentry->d_sb);
 	struct qstr entry = QSTR_INIT(str, len);
+	char strbuf[DNAME_INLINE_LEN];
 	int res;
 
 	if (!dir || !IS_CASEFOLDED(dir))
 		goto fallback;
 
+	/*
+	 * If the dentry name is stored in-line, then it may be concurrently
+	 * modified by a rename.  If this happens, the VFS will eventually retry
+	 * the lookup, so it doesn't matter what ->d_compare() returns.
+	 * However, it's unsafe to call utf8_strncasecmp() with an unstable
+	 * string.  Therefore, we have to copy the name into a temporary buffer.
+	 */
+	if (len <= DNAME_INLINE_LEN - 1) {
+		memcpy(strbuf, str, len);
+		strbuf[len] = 0;
+		entry.name = strbuf;
+		/* prevent compiler from optimizing out the temporary buffer */
+		barrier();
+	}
+
 	res = utf8_strncasecmp(sbi->s_encoding, name, &entry);
 	if (res >= 0)
 		return res;
Signature · 1 line
2.25.1
author maintainer
#296 lore raw

PATCH 296/314 s390: fix syscall_get_error for compat processes

In reply to Greg Kroah-Hartman

From: Dmitry V. Levin <[email protected]>

commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream.

If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0.

Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does.

The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.

This change fixes strace syscall tampering on s390.

arch/s390/include/asm/syscall.h +11 -1
index f073292e9fdb..d9d5de0f67ff 100644
@@ -33,7 +33,17 @@ static inline void syscall_rollback(struct task_struct *task,
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return IS_ERR_VALUE(regs->gprs[2]) ? regs->gprs[2] : 0;
+	unsigned long error = regs->gprs[2];
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_31BIT)) {
+		/*
+		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+		 * and will match correctly in comparisons.
+		 */
+		error = (long)(int)error;
+	}
+#endif
+	return IS_ERR_VALUE(error) ? error : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
author maintainer
#297 lore raw

PATCH 297/314 drm/i915: Fix AUX power domain toggling across TypeC mode resets

In reply to Greg Kroah-Hartman

From: Imre Deak <[email protected]>

commit d96536f0fe699729a0974eb5b65eb0d87cc747e1 upstream.

Make sure to select the port's AUX power domain while holding the TC port lock. The domain depends on the port's current TC mode, which may get changed under us if we're not holding the lock.

This was left out from
commit 8c10e2262663 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")

---
 drivers/gpu/drm/i915/display/intel_dp.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +3 -2
@@ -1292,8 +1292,7 @@ intel_dp_aux_xfer(struct intel_dp *intel
 	bool is_tc_port = intel_phy_is_tc(i915, phy);
 	i915_reg_t ch_ctl, ch_data[5];
 	u32 aux_clock_divider;
-	enum intel_display_power_domain aux_domain =
-		intel_aux_power_domain(intel_dig_port);
+	enum intel_display_power_domain aux_domain;
 	intel_wakeref_t aux_wakeref;
 	intel_wakeref_t pps_wakeref;
 	int i, ret, recv_bytes;
@@ -1308,6 +1307,8 @@ intel_dp_aux_xfer(struct intel_dp *intel
 	if (is_tc_port)
 		intel_tc_port_lock(intel_dig_port);
 
+	aux_domain = intel_aux_power_domain(intel_dig_port);
+
 	aux_wakeref = intel_display_power_get(i915, aux_domain);
 	pps_wakeref = pps_lock(intel_dp);
 
author maintainer
#298 lore raw

PATCH 298/314 drm/msm: Check for powered down HW in the devfreq callbacks

In reply to Greg Kroah-Hartman

From: Jordan Crouse <[email protected]>

commit eadf79286a4badebc95af7061530bdb50a7e6f38 upstream.

Writing to the devfreq sysfs nodes while the GPU is powered down can result in a system crash (on a5xx) or a nasty GMU error (on a6xx):

 $ /sys/class/devfreq/5000000.gpu# echo 500000000 > min_freq
  [  104.841625] platform 506a000.gmu: [drm:a6xx_gmu_set_oob]
	*ERROR* Timeout waiting for GMU OOB set GPU_DCVS: 0x0

Despite the fact that we carefully try to suspend the devfreq device when the hardware is powered down there are lots of holes in the governors that don't check for the suspend state and blindly call into the devfreq callbacks that end up triggering hardware reads in the GPU driver.

Call pm_runtime_get_if_in_use() in the gpu_busy() and gpu_set_freq() callbacks to skip the hardware access if it isn't active.

v3: Only check pm_runtime_get_if_in_use() for == 0 per Eric Anholt
v2: Use pm_runtime_get_if_in_use() per Eric Anholt

---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c |    6 ++++++
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c |    8 ++++++++
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c |    7 +++++++
 3 files changed, 21 insertions(+)
drivers/gpu/drm/msm/adreno/a5xx_gpu.c +6 -0
@@ -1359,6 +1359,10 @@ static unsigned long a5xx_gpu_busy(struc
 {
 	u64 busy_cycles, busy_time;
 
+	/* Only read the gpu busy if the hardware is already active */
+	if (pm_runtime_get_if_in_use(&gpu->pdev->dev) == 0)
+		return 0;
+
 	busy_cycles = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_RBBM_0_LO,
 			REG_A5XX_RBBM_PERFCTR_RBBM_0_HI);
 
@@ -1367,6 +1371,8 @@ static unsigned long a5xx_gpu_busy(struc
 
 	gpu->devfreq.busy_cycles = busy_cycles;
 
+	pm_runtime_put(&gpu->pdev->dev);
+
 	if (WARN_ON(busy_time > ~0LU))
 		return ~0LU;
 
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +8 -0
@@ -107,6 +107,13 @@ static void __a6xx_gmu_set_freq(struct a
 	struct msm_gpu *gpu = &adreno_gpu->base;
 	int ret;
 
+	/*
+	 * This can get called from devfreq while the hardware is idle. Don't
+	 * bring up the power if it isn't already active
+	 */
+	if (pm_runtime_get_if_in_use(gmu->dev) == 0)
+		return;
+
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
@@ -133,6 +140,7 @@ static void __a6xx_gmu_set_freq(struct a
 	 * for now leave it at max so that the performance is nominal.
 	 */
 	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+	pm_runtime_put(gmu->dev);
 }
 
 void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
drivers/gpu/drm/msm/adreno/a6xx_gpu.c +7 -0
@@ -803,6 +803,11 @@ static unsigned long a6xx_gpu_busy(struc
 	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
 	u64 busy_cycles, busy_time;
 
+
+	/* Only read the gpu busy if the hardware is already active */
+	if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) == 0)
+		return 0;
+
 	busy_cycles = gmu_read64(&a6xx_gpu->gmu,
 			REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_L,
 			REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_H);
@@ -812,6 +817,8 @@ static unsigned long a6xx_gpu_busy(struc
 
 	gpu->devfreq.busy_cycles = busy_cycles;
 
+	pm_runtime_put(a6xx_gpu->gmu.dev);
+
 	if (WARN_ON(busy_time > ~0LU))
 		return ~0LU;
 
author maintainer
#299 lore raw

PATCH 299/314 drm/i915/gem: Avoid iterating an empty list

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

commit 757a9395f33c51c4e6eff2c7c0fbd50226a58224 upstream.

Our __sgt_iter assumes that the scattergather list has at least one element. But during construction we may fail in allocating the first page, and so mark the first element as the terminator. This is unexpected!

[22555.524752] RIP: 0010:shmem_get_pages+0x506/0x710 [i915]
[22555.524759] Code: 49 8b 2c 24 31 c0 66 89 44 24 40 48 85 ed 0f 84 62 01 00 00 4c 8b 75 00 8b 5d 08 44 8b 7d 0c 48 8b 0d 7e 34 07 e2 49 83 e6 fc <49> 8b 16 41 01 df 48 89 cf 48 89 d0 48 c1 e8 2d 48 85 c9 0f 84 c8
[22555.524765] RSP: 0018:ffffc9000053f9d0 EFLAGS: 00010246
[22555.524770] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8881ffffa000
[22555.524774] RDX: fffffffffffffff4 RSI: ffffffffffffffff RDI: ffffffff821efe00
[22555.524778] RBP: ffff8881b099ab00 R08: 0000000000000000 R09: 00000000fffffff4
[22555.524782] R10: 0000000000000002 R11: 00000000ffec0a02 R12: ffff8881cd3c8d60
[22555.524786] R13: 00000000fffffff4 R14: 0000000000000000 R15: 0000000000000000
[22555.524790] FS:  00007f4fbeb9b9c0(0000) GS:ffff8881f8580000(0000) knlGS:0000000000000000
[22555.524795] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22555.524799] CR2: 0000000000000000 CR3: 00000001ec7f0004 CR4: 00000000001606e0
[22555.524803] Call Trace:
[22555.524919]  __i915_gem_object_get_pages+0x4f/0x60 [i915]
Fixes 85d1225ec066 ("drm/i915: Introduce & use new lightweight SGL iterators")
Cc Matthew Auld <[email protected]>
Cc Tvrtko Ursulin <[email protected]>
Cc <[email protected]> # v4.8+
(cherry picked from commit 957ad9a02be6faa87594c58ac09460cd3d190d0e)
---
 drivers/gpu/drm/i915/gem/i915_gem_shmem.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_shmem.c +9 -6
@@ -36,7 +36,6 @@ static int shmem_get_pages(struct drm_i9
 	unsigned long last_pfn = 0;	/* suppress gcc warning */
 	unsigned int max_segment = i915_sg_segment_size();
 	unsigned int sg_page_sizes;
-	struct pagevec pvec;
 	gfp_t noreclaim;
 	int ret;
 
@@ -188,13 +187,17 @@ err_sg:
 	sg_mark_end(sg);
 err_pages:
 	mapping_clear_unevictable(mapping);
-	pagevec_init(&pvec);
-	for_each_sgt_page(page, sgt_iter, st) {
-		if (!pagevec_add(&pvec, page))
+	if (sg != st->sgl) {
+		struct pagevec pvec;
+
+		pagevec_init(&pvec);
+		for_each_sgt_page(page, sgt_iter, st) {
+			if (!pagevec_add(&pvec, page))
+				check_release_pagevec(&pvec);
+		}
+		if (pagevec_count(&pvec))
 			check_release_pagevec(&pvec);
 	}
-	if (pagevec_count(&pvec))
-		check_release_pagevec(&pvec);
 	sg_free_table(st);
 	kfree(st);
 
author maintainer
#300 lore raw

PATCH 300/314 drm/i915: Whitelist context-local timestamp in the gen9 cmdparser

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

commit 273500ae71711c040d258a7b3f4b6f44c368fff2 upstream.

Allow batch buffers to read their own _local_ cumulative HW runtime of their logical context.

Fixes 0f2f39758341 ("drm/i915: Add gen9 BCS cmdparsing")
Cc Mika Kuoppala <[email protected]>
Cc <[email protected]> # v5.4+
(cherry picked from commit f9496520df11de00fbafc3cbd693b9570d600ab3)
---
 drivers/gpu/drm/i915/i915_cmd_parser.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/i915_cmd_parser.c +4 -0
@@ -572,6 +572,9 @@ struct drm_i915_reg_descriptor {
 #define REG32(_reg, ...) \
 	{ .addr = (_reg), __VA_ARGS__ }
 
+#define REG32_IDX(_reg, idx) \
+	{ .addr = _reg(idx) }
+
 /*
  * Convenience macro for adding 64-bit registers.
  *
@@ -669,6 +672,7 @@ static const struct drm_i915_reg_descrip
 	REG64_IDX(RING_TIMESTAMP, BSD_RING_BASE),
 	REG32(BCS_SWCTRL),
 	REG64_IDX(RING_TIMESTAMP, BLT_RING_BASE),
+	REG32_IDX(RING_CTX_TIMESTAMP, BLT_RING_BASE),
 	REG64_IDX(BCS_GPR, 0),
 	REG64_IDX(BCS_GPR, 1),
 	REG64_IDX(BCS_GPR, 2),
author maintainer
#301 lore raw

PATCH 301/314 drm/connector: notify userspace on hotplug after register complete

In reply to Greg Kroah-Hartman

From: Jeykumar Sankaran <[email protected]>

commit 968d81a64a883af2d16dd3f8a6ad6b67db2fde58 upstream.

drm connector notifies userspace on hotplug event prematurely before late_register and mode_object register completes. This leads to a race between userspace and kernel on updating the IDR list. So, move the notification to end of connector register.

---
 drivers/gpu/drm/drm_connector.c |    5 +++++
 drivers/gpu/drm/drm_sysfs.c     |    3 ---
 2 files changed, 5 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_connector.c +5 -0
@@ -27,6 +27,7 @@
 #include <drm/drm_print.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_file.h>
+#include <drm/drm_sysfs.h>
 
 #include <linux/uaccess.h>
 
@@ -511,6 +512,10 @@ int drm_connector_register(struct drm_co
 	drm_mode_object_register(connector->dev, &connector->base);
 
 	connector->registration_state = DRM_CONNECTOR_REGISTERED;
+
+	/* Let userspace know we have a new connector */
+	drm_sysfs_hotplug_event(connector->dev);
+
 	goto unlock;
 
 err_debugfs:
drivers/gpu/drm/drm_sysfs.c +0 -3
@@ -293,9 +293,6 @@ int drm_sysfs_connector_add(struct drm_c
 		return PTR_ERR(connector->kdev);
 	}
 
-	/* Let userspace know we have a new connector */
-	drm_sysfs_hotplug_event(dev);
-
 	if (connector->ddc)
 		return sysfs_create_link(&connector->kdev->kobj,
 				 &connector->ddc->dev.kobj, "ddc");
author maintainer
#302 lore raw

PATCH 302/314 drm/amd/display: Use kvfree() to free coeff in build_regamma()

In reply to Greg Kroah-Hartman

From: Denis Efremov <[email protected]>

commit 81921a828b94ce2816932c19a5ec74d302972833 upstream.

Use kvfree() instead of kfree() to free coeff in build_regamma() because the memory is allocated with kvzalloc().

Fixes e752058b8671 ("drm/amd/display: Optimize gamma calculations")
---
 drivers/gpu/drm/amd/display/modules/color/color_gamma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/modules/color/color_gamma.c +1 -1
@@ -799,7 +799,7 @@ static bool build_regamma(struct pwl_flo
 	pow_buffer_ptr = -1; // reset back to no optimize
 	ret = true;
 release:
-	kfree(coeff);
+	kvfree(coeff);
 	return ret;
 }
 
author maintainer
#303 lore raw

PATCH 303/314 drm/i915/icl+: Fix hotplug interrupt disabling after storm detection

In reply to Greg Kroah-Hartman

From: Imre Deak <[email protected]>

commit a3005c2edf7e8c3478880db1ca84028a2b6819bb upstream.

Atm, hotplug interrupts on TypeC ports are left enabled after detecting an interrupt storm, fix this.

Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/1964

---
 drivers/gpu/drm/i915/i915_irq.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/i915_irq.c +1 -0
@@ -3500,6 +3500,7 @@ static void gen11_hpd_irq_setup(struct d
 
 	val = I915_READ(GEN11_DE_HPD_IMR);
 	val &= ~hotplug_irqs;
+	val |= ~enabled_irqs & hotplug_irqs;
 	I915_WRITE(GEN11_DE_HPD_IMR, val);
 	POSTING_READ(GEN11_DE_HPD_IMR);
 
author maintainer
#304 lore raw

PATCH 304/314 Revert "drm/amd/display: disable dcn20 abm feature for bring up"

In reply to Greg Kroah-Hartman

From: Harry Wentland <[email protected]>

commit 14ed1c908a7a623cc0cbf0203f8201d1b7d31d16 upstream.

This reverts commit 96cb7cf13d8530099c256c053648ad576588c387.

This change was used for DCN2 bringup and is no longer desired. In fact it breaks backlight on DCN2 systems.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +5 -8
@@ -929,7 +929,7 @@ static int dm_late_init(void *handle)
 	unsigned int linear_lut[16];
 	int i;
 	struct dmcu *dmcu = adev->dm.dc->res_pool->dmcu;
-	bool ret = false;
+	bool ret;
 
 	for (i = 0; i < 16; i++)
 		linear_lut[i] = 0xFFFF * i / 15;
@@ -945,13 +945,10 @@ static int dm_late_init(void *handle)
 	 */
 	params.min_abm_backlight = 0x28F;
 
-	/* todo will enable for navi10 */
-	if (adev->asic_type <= CHIP_RAVEN) {
-		ret = dmcu_load_iram(dmcu, params);
-
-		if (!ret)
-			return -EINVAL;
-	}
+	ret = dmcu_load_iram(dmcu, params);
+
+	if (!ret)
+		return -EINVAL;
 
 	return detect_mst_link_for_all_connectors(adev->ddev);
 }
author maintainer
#305 lore raw

PATCH 305/314 crypto: algif_skcipher - Cap recv SG list at ctx->used

In reply to Greg Kroah-Hartman

From: Herbert Xu <[email protected]>

commit 7cf81954705b7e5b057f7dc39a7ded54422ab6e1 upstream.

Somewhere along the line the cap on the SG list length for receive was lost. This patch restores it and removes the subsequent test which is now redundant.

Fixes 2d97591ef43d ("crypto: af_alg - consolidation of...")
---
 crypto/algif_skcipher.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
crypto/algif_skcipher.c +1 -5
@@ -74,14 +74,10 @@ static int _skcipher_recvmsg(struct sock
 		return PTR_ERR(areq);
 
 	/* convert iovecs of output buffers into RX SGL */
-	err = af_alg_get_rsgl(sk, msg, flags, areq, -1, &len);
+	err = af_alg_get_rsgl(sk, msg, flags, areq, ctx->used, &len);
 	if (err)
 		goto free;
 
-	/* Process only as much RX buffers for which we have TX data */
-	if (len > ctx->used)
-		len = ctx->used;
-
 	/*
 	 * If more buffers are to be expected to be processed, process only
 	 * full block size buffers.
author maintainer
#306 lore raw

PATCH 306/314 crypto: algboss - dont wait during notifier callback

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 77251e41f89a813b4090f5199442f217bbf11297 upstream.

When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion.

This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read.

Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST.

This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older.

Fixes 398710379f51 ("crypto: algapi - Move larval completion into algboss")
Cc <[email protected]> # v3.6+
Cc Martin K. Petersen <[email protected]>
---
 crypto/algboss.c |    2 --
 1 file changed, 2 deletions(-)
crypto/algboss.c +0 -2
@@ -188,8 +188,6 @@ static int cryptomgr_schedule_probe(stru
 	if (IS_ERR(thread))
 		goto err_put_larval;
 
-	wait_for_completion_interruptible(&larval->completion);
-
 	return NOTIFY_STOP;
 
 err_put_larval:
author maintainer
#307 lore raw

PATCH 307/314 tracing/probe: Fix memleak in fetch_op_data operations

In reply to Greg Kroah-Hartman

From: Vamshi K Sthambamkadi <[email protected]>

commit 3aa8fdc37d16735e8891035becf25b3857d3efe0 upstream.

kmemleak report:

    [<57dcc2ca>] __kmalloc_track_caller+0x139/0x2b0
    [<f1c45d0f>] kstrndup+0x37/0x80
    [<f9761eb0>] parse_probe_arg.isra.7+0x3cc/0x630
    [<055bf2ba>] traceprobe_parse_probe_arg+0x2f5/0x810
    [<655a7766>] trace_kprobe_create+0x2ca/0x950
    [<4fc6a02a>] create_or_delete_trace_kprobe+0xf/0x30
    [<6d1c8a52>] trace_run_command+0x67/0x80
    [<be812cc0>] trace_parse_run_command+0xa7/0x140
    [<aecfe401>] probes_write+0x10/0x20
    [<2027641c>] __vfs_write+0x30/0x1e0
    [<6a4aeee1>] vfs_write+0x96/0x1b0
    [<3517fb7d>] ksys_write+0x53/0xc0
    [<dad91db7>] __ia32_sys_write+0x15/0x20
    [<da347f64>] do_syscall_32_irqs_on+0x3d/0x260
    [<fd0b7e7d>] do_fast_syscall_32+0x39/0xb0
    [<ea5ae810>] entry_SYSENTER_32+0xaf/0x102

Post parse_probe_arg(), the FETCH_OP_DATA operation type is overwritten to FETCH_OP_ST_STRING, as a result memory is never freed since traceprobe_free_probe_arg() iterates only over SYMBOL and DATA op types

Setup fetch string operation correctly after fetch_op_data operation.

Fixes a42e3c4de964 ("tracing/probe: Add immediate string parameter support")
---
 kernel/trace/trace_probe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/trace/trace_probe.c +2 -2
@@ -639,8 +639,8 @@ static int traceprobe_parse_probe_arg_bo
 			ret = -EINVAL;
 			goto fail;
 		}
-		if ((code->op == FETCH_OP_IMM || code->op == FETCH_OP_COMM) ||
-		     parg->count) {
+		if ((code->op == FETCH_OP_IMM || code->op == FETCH_OP_COMM ||
+		     code->op == FETCH_OP_DATA) || parg->count) {
 			/*
 			 * IMM, DATA and COMM is pointing actual address, those
 			 * must be kept, and if parg->count != 0, this is an
author maintainer
#308 lore raw

PATCH 308/314 kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

commit 1a0aa991a6274161c95a844c58cfb801d681eb59 upstream.

In kprobe_optimizer() kick_kprobe_optimizer() is called without kprobe_mutex, but this can race with other caller which is protected by kprobe_mutex.

To fix that, expand kprobe_mutex protected area to protect kick_kprobe_optimizer() call.

Fixes cd7ebe2298ff ("kprobes: Use text_poke_smp_batch for optimizing")
Cc Ingo Molnar <[email protected]>
Cc "Gustavo A . R . Silva" <[email protected]>
Cc Anders Roxell <[email protected]>
Cc "Naveen N . Rao" <[email protected]>
Cc Anil S Keshavamurthy <[email protected]>
Cc David Miller <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ziqian SUN <[email protected]>
---
 kernel/kprobes.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/kprobes.c +2 -1
@@ -586,11 +586,12 @@ static void kprobe_optimizer(struct work
 	mutex_unlock(&module_mutex);
 	mutex_unlock(&text_mutex);
 	cpus_read_unlock();
-	mutex_unlock(&kprobe_mutex);
 
 	/* Step 5: Kick optimizer again if needed */
 	if (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list))
 		kick_kprobe_optimizer();
+
+	mutex_unlock(&kprobe_mutex);
 }
 
 /* Wait for completing optimization and unoptimization */
author maintainer
#309 lore raw

PATCH 309/314 kretprobe: Prevent triggering kretprobe from within kprobe_flush_task

In reply to Greg Kroah-Hartman

From: Jiri Olsa <[email protected]>

commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 upstream.

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output:

============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0

but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

other info that might help us debug this:

  Possible unsafe locking scenario:
        CPU0
        ----

lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));

*** DEADLOCK ***

May be due to missing lock nesting notation

1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 stack backtrace:
 CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
 Call Trace:
  dump_stack+0x96/0xe0
  __lock_acquire.cold.57+0x173/0x2b7
  ? native_queued_spin_lock_slowpath+0x42b/0x9e0
  ? lockdep_hardirqs_on+0x590/0x590
  ? __lock_acquire+0xf63/0x4030
  lock_acquire+0x15a/0x3d0
  ? kretprobe_hash_lock+0x52/0xa0
  _raw_spin_lock_irqsave+0x36/0x70
  ? kretprobe_hash_lock+0x52/0xa0
  kretprobe_hash_lock+0x52/0xa0
  trampoline_handler+0xf8/0x940
  ? kprobe_fault_handler+0x380/0x380
  ? find_held_lock+0x3a/0x1c0
  kretprobe_trampoline+0x25/0x50
  ? lock_acquired+0x392/0xbc0
  ? _raw_spin_lock_irqsave+0x50/0x70
  ? __get_valid_kprobe+0x1f0/0x1f0
  ? _raw_spin_unlock_irqrestore+0x3b/0x40
  ? finish_task_switch+0x4b9/0x6d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70

The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there.

The problem is in outside kprobe_flush_task, where we call:

kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave

where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return.

The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like:

kprobe_flush_task

    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed

        ---> kretprobe_table_locks locked

        kretprobe_trampoline
          trampoline_handler
            kretprobe_hash_lock(current, &head, &flags);  <--- deadlock

Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code.

Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup.

Fixes ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking")
Cc Ingo Molnar <[email protected]>
Cc "Gustavo A . R . Silva" <[email protected]>
Cc Anders Roxell <[email protected]>
Cc "Naveen N . Rao" <[email protected]>
Cc Anil S Keshavamurthy <[email protected]>
Cc David Miller <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 arch/x86/kernel/kprobes/core.c |   16 +++-------------
 include/linux/kprobes.h        |    4 ++++
 kernel/kprobes.c               |   24 ++++++++++++++++++++++++
 3 files changed, 31 insertions(+), 13 deletions(-)
arch/x86/kernel/kprobes/core.c +3 -13
@@ -746,16 +746,11 @@ asm(
 NOKPROBE_SYMBOL(kretprobe_trampoline);
 STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
 
-static struct kprobe kretprobe_kprobe = {
-	.addr = (void *)kretprobe_trampoline,
-};
-
 /*
  * Called from kretprobe_trampoline
  */
 __used __visible void *trampoline_handler(struct pt_regs *regs)
 {
-	struct kprobe_ctlblk *kcb;
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *tmp;
@@ -765,16 +760,12 @@ __used __visible void *trampoline_handle
 	void *frame_pointer;
 	bool skipped = false;
 
-	preempt_disable();
-
 	/*
 	 * Set a dummy kprobe for avoiding kretprobe recursion.
 	 * Since kretprobe never run in kprobe handler, kprobe must not
 	 * be running at this point.
 	 */
-	kcb = get_kprobe_ctlblk();
-	__this_cpu_write(current_kprobe, &kretprobe_kprobe);
-	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+	kprobe_busy_begin();
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -850,7 +841,7 @@ __used __visible void *trampoline_handle
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
-			__this_cpu_write(current_kprobe, &kretprobe_kprobe);
+			__this_cpu_write(current_kprobe, &kprobe_busy);
 		}
 
 		recycle_rp_inst(ri, &empty_rp);
@@ -866,8 +857,7 @@ __used __visible void *trampoline_handle
 
 	kretprobe_hash_unlock(current, &flags);
 
-	__this_cpu_write(current_kprobe, NULL);
-	preempt_enable();
+	kprobe_busy_end();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
include/linux/kprobes.h +4 -0
@@ -350,6 +350,10 @@ static inline struct kprobe_ctlblk *get_
 	return this_cpu_ptr(&kprobe_ctlblk);
 }
 
+extern struct kprobe kprobe_busy;
+void kprobe_busy_begin(void);
+void kprobe_busy_end(void);
+
 kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset);
 int register_kprobe(struct kprobe *p);
 void unregister_kprobe(struct kprobe *p);
kernel/kprobes.c +24 -0
@@ -1237,6 +1237,26 @@ __releases(hlist_lock)
 }
 NOKPROBE_SYMBOL(kretprobe_table_unlock);
 
+struct kprobe kprobe_busy = {
+	.addr = (void *) get_kprobe,
+};
+
+void kprobe_busy_begin(void)
+{
+	struct kprobe_ctlblk *kcb;
+
+	preempt_disable();
+	__this_cpu_write(current_kprobe, &kprobe_busy);
+	kcb = get_kprobe_ctlblk();
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+}
+
+void kprobe_busy_end(void)
+{
+	__this_cpu_write(current_kprobe, NULL);
+	preempt_enable();
+}
+
 /*
  * This function is called from finish_task_switch when task tk becomes dead,
  * so that we can recycle any function-return probe instances associated
@@ -1254,6 +1274,8 @@ void kprobe_flush_task(struct task_struc
 		/* Early boot.  kretprobe_table_locks not yet initialized. */
 		return;
 
+	kprobe_busy_begin();
+
 	INIT_HLIST_HEAD(&empty_rp);
 	hash = hash_ptr(tk, KPROBE_HASH_BITS);
 	head = &kretprobe_inst_table[hash];
@@ -1267,6 +1289,8 @@ void kprobe_flush_task(struct task_struc
 		hlist_del(&ri->hlist);
 		kfree(ri);
 	}
+
+	kprobe_busy_end();
 }
 NOKPROBE_SYMBOL(kprobe_flush_task);
 
author maintainer
#310 lore raw

PATCH 310/314 e1000e: Do not wake up the system via WOL if device wakeup is disabled

In reply to Greg Kroah-Hartman

From: Chen Yu <[email protected]>

commit 6bf6be1127f7e6d4bf39f84d56854e944d045d74 upstream.

Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled

The system should not be woken up if the user has explicitly disabled the wake up ability for this device.

This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs.

---
 drivers/net/ethernet/intel/e1000e/netdev.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/e1000e/netdev.c +10 -4
@@ -6345,11 +6345,17 @@ static int __e1000_shutdown(struct pci_d
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ctrl, ctrl_ext, rctl, status;
-	/* Runtime suspend should only enable wakeup for link changes */
-	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+	u32 ctrl, ctrl_ext, rctl, status, wufc;
 	int retval = 0;
 
+	/* Runtime suspend should only enable wakeup for link changes */
+	if (runtime)
+		wufc = E1000_WUFC_LNKC;
+	else if (device_may_wakeup(&pdev->dev))
+		wufc = adapter->wol;
+	else
+		wufc = 0;
+
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -6406,7 +6412,7 @@ static int __e1000_shutdown(struct pci_d
 	if (adapter->hw.phy.type == e1000_phy_igp_3) {
 		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
 	} else if (hw->mac.type >= e1000_pch_lpt) {
-		if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
+		if (wufc && !(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
 			/* ULP does not support wake from unicast, multicast
 			 * or broadcast.
 			 */
author maintainer
#311 lore raw

PATCH 311/314 net: octeon: mgmt: Repair filling of RX ring

In reply to Greg Kroah-Hartman

From: Alexander Sverdlin <[email protected]>

commit 0c34bb598c510e070160029f34efeeb217000f8d upstream.

The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet driver. mips_swiotlb_ops had an mb() after most of the operations and the removal of the ops had broken the receive functionality of the driver. My code inspection has shown no other places except octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously missing. The latter function however has to make sure that "ringing the bell" doesn't happen before RX ring entry is really written.

The patch has been successfully tested on Octeon II.

Fixes a999933db9ed ("MIPS: remove mips_swiotlb_ops")
---
 drivers/net/ethernet/cavium/octeon/octeon_mgmt.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +5 -0
@@ -235,6 +235,11 @@ static void octeon_mgmt_rx_fill_ring(str
 
 		/* Put it in the ring.  */
 		p->rx_ring[p->rx_next_fill] = re.d64;
+		/* Make sure there is no reorder of filling the ring and ringing
+		 * the bell
+		 */
+		wmb();
+
 		dma_sync_single_for_device(p->dev, p->rx_ring_handle,
 					   ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE),
 					   DMA_BIDIRECTIONAL);
author maintainer
#312 lore raw

PATCH 312/314 pwm: jz4740: Enhance precision in calculation of duty cycle

In reply to Greg Kroah-Hartman

From: Paul Cercueil <[email protected]>

commit 9017dc4fbd59c09463019ce494cfe36d654495a8 upstream.

Calculating the hardware value for the duty from the hardware value of the period resulted in a precision loss versus calculating it from the clock rate directly.

(Also remove a cast that doesn't really need to be here)

Fixes f6b8a5700057 ("pwm: Add Ingenic JZ4740 support")
[ukl: backport to v5.4.y and adapt commit log accordingly]
---
 drivers/pwm/pwm-jz4740.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pwm/pwm-jz4740.c +2 -2
@@ -108,8 +108,8 @@ static int jz4740_pwm_apply(struct pwm_c
 	if (prescaler == 6)
 		return -EINVAL;
 
-	tmp = (unsigned long long)period * state->duty_cycle;
-	do_div(tmp, state->period);
+	tmp = (unsigned long long)rate * state->duty_cycle;
+	do_div(tmp, NSEC_PER_SEC);
 	duty = period - tmp;
 
 	if (duty >= period)
author maintainer
#313 lore raw

PATCH 313/314 sched/rt, net: Use CONFIG_PREEMPTION.patch

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 2da2b32fd9346009e9acdb68c570ca8d3966aba7 ]

CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT.

Update the comment to use CONFIG_PREEMPTION.

---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/dev.c +1 -1
index 8552874e5aac1..b127f022d8bd9 100644
@@ -819,7 +819,7 @@ EXPORT_SYMBOL(dev_get_by_napi_id);
  *
  *	The use of raw_seqcount_begin() and cond_resched() before
  *	retrying is required as we want to give the writers a chance
- *	to complete when CONFIG_PREEMPT is not set.
+ *	to complete when CONFIG_PREEMPTION is not set.
  */
 int netdev_get_name(struct net *net, char *name, int ifindex)
 {
Signature · 1 line
2.25.1
author maintainer
#314 lore raw

PATCH 314/314 net: core: device_rename: Use rwsem instead of a seqcount

In reply to Greg Kroah-Hartman

From: Ahmed S. Darwish <[email protected]>

[ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ]

Sequence counters write paths are critical sections that must never be preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.

Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and netdev name retrieval.") handled a deadlock, observed with CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was infinitely spinning: it got scheduled after the seqcount write side blocked inside its own critical section.

To fix that deadlock, among other issues, the commit added a cond_resched() inside the read side section. While this will get the non-preemptible kernel eventually unstuck, the seqcount reader is fully exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.

The fix is also still broken: if the seqcount reader belongs to a real-time scheduling policy, it can spin forever and the kernel will livelock.

Disabling preemption over the seqcount write side critical section will not work: inside it are a number of GFP_KERNEL allocations and mutex locking through the drivers/base/ :: device_rename() call chain.

Quoted 1 line

From all the above, replace the seqcount with a rwsem.

Fixes 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount)
Fixes c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
---
 net/core/dev.c | 40 ++++++++++++++++++----------------------
 1 file changed, 18 insertions(+), 22 deletions(-)
net/core/dev.c +18 -22
index b127f022d8bd9..204d87e7c9b19 100644
@@ -79,6 +79,7 @@
 #include <linux/sched.h>
 #include <linux/sched/mm.h>
 #include <linux/mutex.h>
+#include <linux/rwsem.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/socket.h>
@@ -194,7 +195,7 @@ static DEFINE_SPINLOCK(napi_hash_lock);
 static unsigned int napi_gen_id = NR_CPUS;
 static DEFINE_READ_MOSTLY_HASHTABLE(napi_hash, 8);
 
-static seqcount_t devnet_rename_seq;
+static DECLARE_RWSEM(devnet_rename_sem);
 
 static inline void dev_base_seq_inc(struct net *net)
 {
@@ -816,33 +817,28 @@ EXPORT_SYMBOL(dev_get_by_napi_id);
  *	@net: network namespace
  *	@name: a pointer to the buffer where the name will be stored.
  *	@ifindex: the ifindex of the interface to get the name from.
- *
- *	The use of raw_seqcount_begin() and cond_resched() before
- *	retrying is required as we want to give the writers a chance
- *	to complete when CONFIG_PREEMPTION is not set.
  */
 int netdev_get_name(struct net *net, char *name, int ifindex)
 {
 	struct net_device *dev;
-	unsigned int seq;
+	int ret;
 
-retry:
-	seq = raw_seqcount_begin(&devnet_rename_seq);
+	down_read(&devnet_rename_sem);
 	rcu_read_lock();
+
 	dev = dev_get_by_index_rcu(net, ifindex);
 	if (!dev) {
-		rcu_read_unlock();
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 
 	strcpy(name, dev->name);
-	rcu_read_unlock();
-	if (read_seqcount_retry(&devnet_rename_seq, seq)) {
-		cond_resched();
-		goto retry;
-	}
 
-	return 0;
+	ret = 0;
+out:
+	rcu_read_unlock();
+	up_read(&devnet_rename_sem);
+	return ret;
 }
 
 /**
@@ -1115,10 +1111,10 @@ int dev_change_name(struct net_device *dev, const char *newname)
 	    likely(!(dev->priv_flags & IFF_LIVE_RENAME_OK)))
 		return -EBUSY;
 
-	write_seqcount_begin(&devnet_rename_seq);
+	down_write(&devnet_rename_sem);
 
 	if (strncmp(newname, dev->name, IFNAMSIZ) == 0) {
-		write_seqcount_end(&devnet_rename_seq);
+		up_write(&devnet_rename_sem);
 		return 0;
 	}
 
@@ -1126,7 +1122,7 @@ int dev_change_name(struct net_device *dev, const char *newname)
 
 	err = dev_get_valid_name(net, dev, newname);
 	if (err < 0) {
-		write_seqcount_end(&devnet_rename_seq);
+		up_write(&devnet_rename_sem);
 		return err;
 	}
 
@@ -1141,11 +1137,11 @@ rollback:
 	if (ret) {
 		memcpy(dev->name, oldname, IFNAMSIZ);
 		dev->name_assign_type = old_assign_type;
-		write_seqcount_end(&devnet_rename_seq);
+		up_write(&devnet_rename_sem);
 		return ret;
 	}
 
-	write_seqcount_end(&devnet_rename_seq);
+	up_write(&devnet_rename_sem);
 
 	netdev_adjacent_rename_links(dev, oldname);
 
@@ -1166,7 +1162,7 @@ rollback:
 		/* err >= 0 after dev_alloc_name() or stores the first errno */
 		if (err >= 0) {
 			err = ret;
-			write_seqcount_begin(&devnet_rename_seq);
+			down_write(&devnet_rename_sem);
 			memcpy(dev->name, oldname, IFNAMSIZ);
 			memcpy(oldname, newname, IFNAMSIZ);
 			dev->name_assign_type = old_assign_type;
Signature · 1 line
2.25.1
#315 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.49-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

I ran this through my LLVM build tests and saw no regressions compared to 5.4.47.

Cheers,
Nathan

author maintainer
#316 lore raw
Quoted 15 lines · Nathan Chancellor
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.49-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

I ran this through my LLVM build tests and saw no regressions compared to 5.4.47.

Great, thanks for testing!

greg k-h

#317 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

I see a number of reboot failures in mcimx7d-sabre images; it looks like the gpio driver doesn't instantiate. I'll bisect.

This affects both v5.4.y and v5.7.y.

Guenter

#318 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

[ ... ]

Quoted 3 lines

Christophe JAILLET <[email protected]>
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'

This patch has since been reverted in the upstream kernel (commit 13f2d25b951f) and needs to be dropped.

Guenter

author maintainer
#319 lore raw
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

Quoted 7 lines

[ ... ]

Quoted 3 lines

Christophe JAILLET <[email protected]>
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'

This patch has since been reverted in the upstream kernel (commit 13f2d25b951f) and needs to be dropped.

Now dropped, thanks.

greg k-h

#320 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.49 release. There are 314 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Jun 2020 19:52:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.49-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah