net/colo-compare.c: Expose "max_queue_size" to users and clean up
v2 cover net/colo-compare.c: Expose "max_queue_size" to users and clean up
From: Zhang Chen <[email protected]>
This series make a way to config COLO "max_queue_size" parameters according to user's scenarios and environments and do some clean up for descriptions.
V2:
- Rebase on upstream code.
Zhang Chen (2):
net/colo-compare.c: Expose compare "max_queue_size" to users qemu-options.hx: Clean up and fix typo for colo-compare
net/colo-compare.c | 43 ++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 33 +++++++++++++++++---------------- 2 files changed, 59 insertions(+), 17 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/2 net/colo-compare.c: Expose compare "max_queue_size" to users
From: Zhang Chen <[email protected]>
This patch allow users to set the "max_queue_size" according to their environment.
--- net/colo-compare.c | 43 ++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 5 +++-- 2 files changed, 45 insertions(+), 3 deletions(-)
net/colo-compare.c +42 -1
@@ -59,6 +59,7 @@ static bool colo_compare_active;static QemuMutex event_mtx;static QemuCond event_complete_cond;static int event_unhandled_count; +static uint32_t max_queue_size;/* * + CompareState ++
@@ -222,7 +223,7 @@ static void fill_pkt_tcp_info(void *data, uint32_t *max_ack)*/ static int colo_insert_packet (GQueue *queue,Packet *pkt,uint32_t *max_ack) { -if (g_queue_get_length (queue) <=MAX_QUEUE_SIZE ) { +if (g_queue_get_length (queue) <= max_queue_size) {if (pkt->ip->ip_p ==IPPROTO_TCP ) {fill_pkt_tcp_info (pkt, max_ack); g_queue_insert_sorted(queue,
@@ -1144,6 +1145,37 @@ out:error_propagate (errp, local_err); } +static void get_max_queue_size (Object *obj,Visitor *v, +const char *name,void *opaque, +Error **errp) +{ +uint32_t value = max_queue_size; + +visit_type_uint32 (v, name, &value, errp); +} + +static void set_max_queue_size (Object *obj,Visitor *v, +const char *name,void *opaque, +Error **errp) +{ +Error *local_err =NULL ; +uint32_t value; + +visit_type_uint32 (v, name, &value, &local_err); +if (local_err) { + goto out; + } +if (!value) { +error_setg (&local_err,"Property '%s.%s' requires a positive value" , +object_get_typename (obj), name); + goto out; + } + max_queue_size = value; + +out: +error_propagate (errp, local_err); +} +static void compare_pri_rs_finalize (SocketReadState *pri_rs) {CompareState *s =container_of (pri_rs, CompareState, pri_rs);
@@ -1261,6 +1293,11 @@ static void colo_compare_complete(UserCreatable *uc, Error **errp) s->expired_scan_cycle =REGULAR_PACKET_CHECK_MS ; } +if (!max_queue_size) { +/* Set default queue size to 1024 */ + max_queue_size =MAX_QUEUE_SIZE ; + } +if (find_and_check_chardev (&chr, s->pri_indev, errp) || !qemu_chr_fe_init (&s->chr_pri_in, chr, errp)) {return ;
@@ -1380,6 +1417,10 @@ static void colo_compare_init(Object *obj) compare_get_expired_scan_cycle, compare_set_expired_scan_cycle, NULL, NULL); +object_property_add (obj,"max_queue_size" ,"uint32" , + get_max_queue_size, + set_max_queue_size,NULL ,NULL ); + s->vnet_hdr = false;object_property_add_bool (obj,"vnet_hdr_support" , compare_get_vnet_hdr, compare_set_vnet_hdr);
qemu-options.hx +3 -2
@@ -4639,7 +4639,7 @@ SRST stored. The file format is libpcap, so it can be analyzed with tools such as tcpdump or Wireshark. - ``-object colo-compare,id=id,primary_in=chardevid,secondary_in=chardevid,outdev=chardevid,iothread=id[,vnet_hdr_support][,notify_dev=id][,compare_timeout=@var{ms}][,expired_scan_cycle=@var{ms}`` + ``-object colo-compare,id=id,primary_in=chardevid,secondary_in=chardevid,outdev=chardevid,iothread=id[,vnet_hdr_support][,notify_dev=id][,compare_timeout=@var{ms}][,expired_scan_cycle=@var{ms}][,max_queue_size=@var{size}]`` Colo-compare gets packet from primary\_inchardevid and secondary\_inchardevid, than compare primary packet with secondary packet. If the packets are same, we will output
@@ -4651,7 +4651,8 @@ SRST vnet\_hdr\_len. Then compare\_timeout=@var{ms} determines the maximum delay colo-compare wait for the packet. The expired\_scan\_cycle=@var{ms} to set the period of scanning - expired primary node network packets. + expired primary node network packets. The max\_queue\_size=@var{size} + is to set the max compare queue size depend on user environment. If you want to use Xen COLO, will need the notify\_dev to notify Xen colo-frame to do checkpoint.
Signature · 1 line
2.17.1
PATCH v2 2/2 qemu-options.hx: Clean up and fix typo for colo-compare
In reply to Zhang ChenFrom: Zhang Chen <[email protected]>
Fix some typo and optimized some descriptions.
--- qemu-options.hx | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
qemu-options.hx +16 -16
@@ -4640,24 +4640,24 @@ SRST tools such as tcpdump or Wireshark. ``-object colo-compare,id=id,primary_in=chardevid,secondary_in=chardevid,outdev=chardevid,iothread=id[,vnet_hdr_support][,notify_dev=id][,compare_timeout=@var{ms}][,expired_scan_cycle=@var{ms}][,max_queue_size=@var{size}]`` - Colo-compare gets packet from primary\_inchardevid and - secondary\_inchardevid, than compare primary packet with - secondary packet. If the packets are same, we will output - primary packet to outdevchardevid, else we will notify - colo-frame do checkpoint and send primary packet to - outdevchardevid. In order to improve efficiency, we need to put - the task of comparison in another thread. If it has the - vnet\_hdr\_support flag, colo compare will send/recv packet with - vnet\_hdr\_len. Then compare\_timeout=@var{ms} determines the - maximum delay colo-compare wait for the packet. - The expired\_scan\_cycle=@var{ms} to set the period of scanning - expired primary node network packets. The max\_queue\_size=@var{size} - is to set the max compare queue size depend on user environment. - If you want to use Xen COLO, will need the notify\_dev to + Colo-compare gets packet from primary\_in chardevid and + secondary\_in, then compare whether the payload of primary packet + and secondary packet are the same. If same, it will output + primary packet to out\_dev, else it will notify COLO-framework to do + checkpoint and send primary packet to out\_dev. In order to + improve efficiency, we need to put the task of comparison in + another iothread. If it has the vnet\_hdr\_support flag, + colo compare will send/recv packet with vnet\_hdr\_len. + The compare\_timeout=@var{ms} determines the maximum time of the + colo-compare hold the packet. The expired\_scan\_cycle=@var{ms} + is to set the period of scanning expired primary node network packets. + The max\_queue\_size=@var{size} is to set the max compare queue + size depend on user environment. + If user want to use Xen COLO, need to add the notify\_dev to notify Xen colo-frame to do checkpoint. - we must use it with the help of filter-mirror and - filter-redirector. + COLO-compare must be used with the help of filter-mirror, + filter-redirector and filter-rewriter. ::
Signature · 1 line
2.17.1
Hi Jason,
Maybe missed this updated series?
Thanks
Zhang Chen
Quoted 29 lines
-----Original Message-----
From: Zhang, Chen <[email protected]>
Sent: Wednesday, June 24, 2020 9:21 AM
To: Jason Wang <[email protected]>
Cc: Zhang Chen <[email protected]>; qemu-dev <qemu- [email protected]>; Zhang, Chen <[email protected]>
Subject: [PATCH V2 0/2]net/colo-compare.c: Expose "max_queue_size" to users and clean upFrom: Zhang Chen <[email protected]>
This series make a way to config COLO "
max_queue_size" parameters according to user's scenarios and environments and do some clean up for descriptions.V2:
- Rebase on upstream code.Zhang Chen (2):
net/colo-compare.c: Expose compare "max_queue_size" to users qemu-options.hx: Clean up and fix typo for colo-comparenet/colo-compare.c | 43 ++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 33 +++++++++++++++++---------------- 2 files changed, 59 insertions(+), 17 deletions(-)--
2.17.1
Quoted 6 lines · Chen
Hi Jason,
Maybe missed this updated series?
Thanks
Zhang Chen
Nope :)
It's in my queue. Since I only have those two patches so I don't plan to send pull request this week.
(Anyway it's not a feature, so we don't need to worry about soft freeze).
Thanks
Quoted 30 lines
Quoted 30 lines
-----Original Message-----
From: Zhang, Chen <[email protected]>
Sent: Wednesday, June 24, 2020 9:21 AM
To: Jason Wang <[email protected]>
Cc: Zhang Chen <[email protected]>; qemu-dev <qemu- [email protected]>; Zhang, Chen <[email protected]>
Subject: [PATCH V2 0/2]net/colo-compare.c: Expose "max_queue_size" to users and clean upFrom: Zhang Chen <[email protected]>
This series make a way to config COLO "
max_queue_size" parameters according to user's scenarios and environments and do some clean up for descriptions.V2:
- Rebase on upstream code.Zhang Chen (2):
net/colo-compare.c: Expose compare "max_queue_size" to users qemu-options.hx: Clean up and fix typo for colo-comparenet/colo-compare.c | 43 ++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 33 +++++++++++++++++---------------- 2 files changed, 59 insertions(+), 17 deletions(-)--
2.17.1