Skip to contentSkip to conversation

TAS2562 issue fixes and slot programming

PATCH In review Dan Murphy 2 participants 10 messages Jun 24, 2020 – Jun 25, 2020

Subsystems (4)
lore
Share & tools
lore

Dan Murphy

author
#0 lore raw

v6 cover TAS2562 issue fixes and slot programming

Hello

This series fixes issues tih the shut-down gpio device tree allocation and a code format issue found.

While working on a project slot programming for the tx and rx paths needed to be enabled. In addition the vsense slot programming needed to be configurable and not directly a simpler adder to the isense slot.

Finally the yaml conversion patch was moved to be the last patch in the series so that the fixes can be applied and the yaml can be reviewed appropriately and does not hold up the rest of the fixes.

Dan

Dan Murphy (7):
dt-bindings: tas2562: Fix shut-down gpio property
ASoC: tas2562: Update shutdown GPIO property
ASoC: tas2562: Fix format issue for extra space before a comma
ASoC: tas2562: Add rx and tx slot programming
dt-bindings: tas2562: Add voltage sense slot property
ASoC: tas2562: Add voltage sense slot configuration
dt-bindings: tas2562: Convert the tas2562 binding to yaml

 .../devicetree/bindings/sound/tas2562.txt     | 34 -------
 .../devicetree/bindings/sound/tas2562.yaml    | 77 ++++++++++++++++
 sound/soc/codecs/tas2562.c                    | 88 +++++++++++++++----
 sound/soc/codecs/tas2562.h                    |  4 +
 4 files changed, 151 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt
 create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml
Signature · 1 line
2.26.2
author
#1 lore raw

PATCH v6 1/7 dt-bindings: tas2562: Fix shut-down gpio property

Fix the shut-down gpio property to be shut-down-gpio and fix the example.

---
 Documentation/devicetree/bindings/sound/tas2562.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/sound/tas2562.txt +2 -2
index 94796b547184..fd0ac8636c01 100644
@@ -16,7 +16,7 @@ Optional properties:
 - interrupt-parent: phandle to the interrupt controller which provides
                     the interrupt.
 - interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down: GPIO used to control the state of the device.
+- shut-down-gpio: GPIO used to control the state of the device.
 
 Examples:
 tas2562@4c {
@@ -28,7 +28,7 @@ tas2562@4c {
         interrupt-parent = <&gpio1>;
         interrupts = <14>;
 
-	shut-down = <&gpio1 15 0>;
+	shut-down-gpio = <&gpio1 15 0>;
         ti,imon-slot-no = <0>;
 };
 
Signature · 1 line
2.26.2
author
#2 lore raw

PATCH v6 2/7 ASoC: tas2562: Update shutdown GPIO property

In reply to Dan Murphy

Update the shutdown GPIO property to be shutdown from shut-down.

Fixes c173dba44c2d2 ("ASoC: tas2562: Introduce the TAS2562 amplifier")
---
 sound/soc/codecs/tas2562.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/tas2562.c +2 -2
index 7fae88655a0f..f6495426f562 100644
@@ -619,8 +619,8 @@ static int tas2562_parse_dt(struct tas2562_data *tas2562)
 	struct device *dev = tas2562->dev;
 	int ret = 0;
 
-	tas2562->sdz_gpio = devm_gpiod_get_optional(dev, "shut-down-gpio",
-						      GPIOD_OUT_HIGH);
+	tas2562->sdz_gpio = devm_gpiod_get_optional(dev, "shut-down",
+						    GPIOD_OUT_HIGH);
 	if (IS_ERR(tas2562->sdz_gpio)) {
 		if (PTR_ERR(tas2562->sdz_gpio) == -EPROBE_DEFER) {
 			tas2562->sdz_gpio = NULL;
Signature · 1 line
2.26.2
author
#3 lore raw

PATCH v6 3/7 ASoC: tas2562: Fix format issue for extra space before a comma

In reply to Dan Murphy

Fix the issue found that there is an extra space before a comma in the volume control.

Fixes bf726b1c86f2c ("ASoC: tas2562: Add support for digital volume control")
---
 sound/soc/codecs/tas2562.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/tas2562.c +1 -1
index f6495426f562..d26e30a2948c 100644
@@ -504,7 +504,7 @@ static const struct snd_kcontrol_new tas2562_snd_controls[] = {
 		.info = snd_soc_info_volsw,
 		.get = tas2562_volume_control_get,
 		.put = tas2562_volume_control_put,
-		.private_value = SOC_SINGLE_VALUE(TAS2562_DVC_CFG1, 0, 110, 0, 0) ,
+		.private_value = SOC_SINGLE_VALUE(TAS2562_DVC_CFG1, 0, 110, 0, 0),
 	},
 };
 
Signature · 1 line
2.26.2
author
#4 lore raw

PATCH v6 4/7 ASoC: tas2562: Add rx and tx slot programming

In reply to Dan Murphy

Add programming for the tdm slots for both tx and rx offsets.

---
 sound/soc/codecs/tas2562.c | 17 ++++++++++++++++-
 sound/soc/codecs/tas2562.h |  4 ++++
 2 files changed, 20 insertions(+), 1 deletion(-)
sound/soc/codecs/tas2562.c +16 -1
index d26e30a2948c..2f1d4b697f01 100644
@@ -208,6 +208,22 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai,
 	if (ret < 0)
 		return ret;
 
+	if (tx_mask > TAS2562_TX_OFF_MAX) {
+		dev_err(tas2562->dev, "TX slot is larger then %d",
+			TAS2562_TX_OFF_MAX);
+		return -EINVAL;
+	}
+
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG1,
+					    TAS2562_RX_OFF_MASK, rx_mask << 1);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG4,
+					    TAS2562_TX_OFF_MASK, tx_mask << 1);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -327,7 +343,6 @@ static int tas2562_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG1,
 					    TAS2562_TDM_CFG1_RX_OFFSET_MASK,
 					    tdm_rx_start_slot);
-
 	if (ret < 0)
 		return ret;
 
sound/soc/codecs/tas2562.h +4 -0
index 28e75fc431d0..47e59c82eef3 100644
@@ -34,6 +34,10 @@
 #define TAS2562_TDM_DET		TAS2562_REG(0, 0x11)
 #define TAS2562_REV_ID		TAS2562_REG(0, 0x7d)
 
+#define TAS2562_RX_OFF_MASK	GENMASK(5, 1)
+#define TAS2562_TX_OFF_MASK	GENMASK(3, 1)
+#define TAS2562_TX_OFF_MAX	7
+
 /* Page 2 */
 #define TAS2562_DVC_CFG1	TAS2562_REG(2, 0x0c)
 #define TAS2562_DVC_CFG2	TAS2562_REG(2, 0x0d)
Signature · 1 line
2.26.2
author
#5 lore raw

Re: [PATCH v6 4/7] ASoC: tas2562: Add rx and tx slot programming

Hello

Quoted 22 lines · Dan Murphy

Add programming for the tdm slots for both tx and rx offsets.

---
  sound/soc/codecs/tas2562.c | 17 ++++++++++++++++-
  sound/soc/codecs/tas2562.h |  4 ++++
  2 files changed, 20 insertions(+), 1 deletion(-)
sound/soc/codecs/tas2562.c +6 -0
index d26e30a2948c..2f1d4b697f01 100644
@@ -208,6 +208,22 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai,
  	if (ret < 0)
  		return ret;
 
+	if (tx_mask > TAS2562_TX_OFF_MAX) {
+		dev_err(tas2562->dev, "TX slot is larger then %d",
+			TAS2562_TX_OFF_MAX);
+		return -EINVAL;
+	}
+

sound/soc/codecs/tas2562.c static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai, · line 226

Quoted 10 lines
sound/soc/codecs/tas2562.c +10 -0
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG1,
+					    TAS2562_RX_OFF_MASK, rx_mask << 1);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG4,
+					    TAS2562_TX_OFF_MASK, tx_mask << 1);
+	if (ret < 0)
+		return ret;
+

I need to fix this patch to remove the slot programming during dai_fmt as the code is not correct and resets the slots

Dan

author
#6 lore raw

PATCH v6 5/7 dt-bindings: tas2562: Add voltage sense slot property

In reply to Dan Murphy

Add a property to configure the slot for the voltage sense monitoring of the device. Vsense data will be sent to the processor via the slot defined by the property

---
 Documentation/devicetree/bindings/sound/tas2562.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/sound/tas2562.txt +3 -0
index fd0ac8636c01..dc6d7362ded7 100644
@@ -11,6 +11,8 @@ Required properties:
  - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
  - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
  - ti,imon-slot-no:- TDM TX current sense time slot.
+ - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
+		     greater then ti,imon-slot-no.
 
 Optional properties:
 - interrupt-parent: phandle to the interrupt controller which provides
@@ -30,5 +32,6 @@ tas2562@4c {
 
 	shut-down-gpio = <&gpio1 15 0>;
         ti,imon-slot-no = <0>;
+        ti,vmon-slot-no = <1>;
 };
 
Signature · 1 line
2.26.2
author
#7 lore raw

PATCH v6 6/7 ASoC: tas2562: Add voltage sense slot configuration

In reply to Dan Murphy

Add Vsense slot configuration based on the device tree. Adding this property enables the slot programming to be moved to the tdm_set_slot callback. This in affect sets the slots for the Isense and Vsense and enabling this these modes are now based on whether these features were powered on or not.

---
 sound/soc/codecs/tas2562.c | 65 ++++++++++++++++++++++++++++++--------
 1 file changed, 51 insertions(+), 14 deletions(-)
sound/soc/codecs/tas2562.c +51 -14
index 2f1d4b697f01..b0b7cef79433 100644
@@ -224,12 +224,26 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai,
 	if (ret < 0)
 		return ret;
 
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG5,
+					    TAS2562_TDM_CFG5_VSNS_SLOT_MASK,
+					    tas2562->v_sense_slot);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG6,
+					    TAS2562_TDM_CFG6_ISNS_SLOT_MASK,
+					    tas2562->i_sense_slot);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
 static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth)
 {
 	int ret;
+	int val;
+	int sense_en;
 
 	switch (bitwidth) {
 	case SNDRV_PCM_FORMAT_S16_LE:
@@ -237,21 +251,18 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth)
 					      TAS2562_TDM_CFG2,
 					      TAS2562_TDM_CFG2_RXWLEN_MASK,
 					      TAS2562_TDM_CFG2_RXWLEN_16B);
-		tas2562->v_sense_slot = tas2562->i_sense_slot + 2;
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
 		snd_soc_component_update_bits(tas2562->component,
 					      TAS2562_TDM_CFG2,
 					      TAS2562_TDM_CFG2_RXWLEN_MASK,
 					      TAS2562_TDM_CFG2_RXWLEN_24B);
-		tas2562->v_sense_slot = tas2562->i_sense_slot + 4;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		snd_soc_component_update_bits(tas2562->component,
 					      TAS2562_TDM_CFG2,
 					      TAS2562_TDM_CFG2_RXWLEN_MASK,
 					      TAS2562_TDM_CFG2_RXWLEN_32B);
-		tas2562->v_sense_slot = tas2562->i_sense_slot + 4;
 		break;
 
 	default:
@@ -259,17 +270,27 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth)
 		return -EINVAL;
 	}
 
-	ret = snd_soc_component_update_bits(tas2562->component,
-		TAS2562_TDM_CFG5,
-		TAS2562_TDM_CFG5_VSNS_EN | TAS2562_TDM_CFG5_VSNS_SLOT_MASK,
-		TAS2562_TDM_CFG5_VSNS_EN | tas2562->v_sense_slot);
+	val = snd_soc_component_read(tas2562->component, TAS2562_PWR_CTRL);
+	if (val < 0)
+		return val;
+
+	if (val & (1 << TAS2562_VSENSE_POWER_EN))
+		sense_en = 0;
+	else
+		sense_en = TAS2562_TDM_CFG5_VSNS_EN;
+
+	ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG5,
+		TAS2562_TDM_CFG5_VSNS_EN, sense_en);
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_component_update_bits(tas2562->component,
-		TAS2562_TDM_CFG6,
-		TAS2562_TDM_CFG6_ISNS_EN | TAS2562_TDM_CFG6_ISNS_SLOT_MASK,
-		TAS2562_TDM_CFG6_ISNS_EN | tas2562->i_sense_slot);
+	if (val & (1 << TAS2562_ISENSE_POWER_EN))
+		sense_en = 0;
+	else
+		sense_en = TAS2562_TDM_CFG6_ISNS_EN;
+
+	ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG6,
+		TAS2562_TDM_CFG6_ISNS_EN, sense_en);
 	if (ret < 0)
 		return ret;
 
@@ -645,9 +666,25 @@ static int tas2562_parse_dt(struct tas2562_data *tas2562)
 
 	ret = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no",
 			&tas2562->i_sense_slot);
-	if (ret)
-		dev_err(dev, "Looking up %s property failed %d\n",
-			"ti,imon-slot-no", ret);
+	if (ret) {
+		dev_err(dev, "Property %s is missing setting default slot\n",
+			"ti,imon-slot-no");
+		tas2562->i_sense_slot = 0;
+	}
+
+
+	ret = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no",
+			&tas2562->v_sense_slot);
+	if (ret) {
+		dev_info(dev, "Property %s is missing setting default slot\n",
+			"ti,vmon-slot-no");
+		tas2562->v_sense_slot = 2;
+	}
+
+	if (tas2562->v_sense_slot < tas2562->i_sense_slot) {
+		dev_err(dev, "Vsense slot must be greater than Isense slot\n");
+		return -EINVAL;
+	}
 
 	return ret;
 }
Signature · 1 line
2.26.2
author
#8 lore raw

PATCH v6 7/7 dt-bindings: tas2562: Convert the tas2562 binding to yaml

In reply to Dan Murphy

Convert the TAS2562 text file to yaml format.

---
 .../devicetree/bindings/sound/tas2562.txt     | 37 ---------
 .../devicetree/bindings/sound/tas2562.yaml    | 77 +++++++++++++++++++
 2 files changed, 77 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt
 create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml
Documentation/devicetree/bindings/sound/tas2562.txt deleted +0 -37
deleted file mode 100644
index dc6d7362ded7..000000000000
@@ -1,37 +0,0 @@
-Texas Instruments TAS2562 Smart PA
-
-The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-
-Required properties:
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
- - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- - ti,imon-slot-no:- TDM TX current sense time slot.
- - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
-		     greater then ti,imon-slot-no.
-
-Optional properties:
-- interrupt-parent: phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down-gpio: GPIO used to control the state of the device.
-
-Examples:
-tas2562@4c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        compatible = "ti,tas2562";
-        reg = <0x4c>;
-
-        interrupt-parent = <&gpio1>;
-        interrupts = <14>;
-
-	shut-down-gpio = <&gpio1 15 0>;
-        ti,imon-slot-no = <0>;
-        ti,vmon-slot-no = <1>;
-};
-
Documentation/devicetree/bindings/sound/tas2562.yaml new file +77 -0

77 lines not on this page · raw message

Signature · 1 line
2.26.2
maintainer
#9 lore raw
In reply to Dan Murphy
Quoted 8 lines · Dan Murphy

This series fixes issues tih the shut-down gpio device tree allocation and a code format issue found.

While working on a project slot programming for the tx and rx paths needed to be enabled. In addition the vsense slot programming needed to be configurable and not directly a simpler adder to the isense slot.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/6] ASoC: tas2562: Fix shut-down gpio property

      commit: 6f81e520b2906258a063f09b8d1dd9d0cc6a3172
[2/6] ASoC: tas2562: Update shutdown GPIO property
      commit: bc07b54459cbb3a572a78b5c200ff79ef11b8158
[3/6] ASoC: tas2562: Fix format issue for extra space before a comma
      commit: c8294da2ed0be726bb87019eba3a6367c7f1c922

[4/6] ASoC: tas2562: Add rx and tx slot programming
(no commit info)
[5/6] dt-bindings: tas2562: Add voltage sense slot property
(no commit info)
[6/6] ASoC: tas2562: Add voltage sense slot configuration
(no commit info)

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark