drm/connector: fix minor typos in comments
Subsystems (2)
PATCH 1/1 drm/connector: fix minor typos in comments
Some of these comments are part of the Linux GPU Driver Developer's Guide.
Fix some minor typo in the comments and remove a repeated 'the'.
Signed-off-by Antonio Borneo <[email protected]>
--- drivers/gpu/drm/drm_connector.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/gpu/drm/drm_connector.c +11 -11
@@ -38,7 +38,7 @@* DOC: overview * * In DRM connectors are the general abstraction for display sinks, and include -* als fixed panels or anything else that can display pixels in some form. As +* also fixed panels or anything else that can display pixels in some form. As * opposed to all other KMS objects representing hardware (like CRTC, encoder or * plane abstractions) connectors can be hotplugged and unplugged at runtime. * Hence they are reference-counted using drm_connector_get() and
@@ -129,7 +129,7 @@ EXPORT_SYMBOL(drm_get_connector_type_name);/** * drm_connector_get_cmdline_mode - reads the user's cmdline mode -* @connector: connector to quwery +* @connector: connector to query * * The kernel supports per-connector configuration of its consoles through * use of the video= parameter. This function parses that option and
@@ -991,7 +991,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {* DP MST sinks), or high-res integrated panels (like dual-link DSI) which * are not gen-locked. Note that for tiled panels which are genlocked, like * dual-link LVDS or dual-link DSI, the driver should try to not expose the -* tiling and virtualize both &drm_crtc and &drm_plane if needed. Drivers +* tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers * should update this value using drm_connector_set_tile_property(). * Userspace cannot change this property. * link-status:
@@ -1131,7 +1131,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {* * It will even need to do colorspace conversion and get all layers * to one common colorspace for blending. It can use either GL, Media -* or display engine to get this done based on the capabilties of the +* or display engine to get this done based on the capabilities of the * associated hardware. * * Driver expects metadata to be put in &struct hdr_output_metadata
@@ -1614,7 +1614,7 @@ EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);* variable refresh rate capability for a connector. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_connector_attach_vrr_capable_property (struct drm_connector *connector)
@@ -1759,7 +1759,7 @@ EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);* HDMI connectors. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_mode_create_hdmi_colorspace_property (struct drm_connector *connector) {
@@ -1788,7 +1788,7 @@ EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property);* DP connectors. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_mode_create_dp_colorspace_property (struct drm_connector *connector) {
@@ -1840,7 +1840,7 @@ EXPORT_SYMBOL(drm_mode_create_content_type_property);* drm_mode_create_suggested_offset_properties - create suggests offset properties * @dev: DRM device * -* Create the the suggested x/y offset property for connectors. +* Create the suggested x/y offset property for connectors. */ int drm_mode_create_suggested_offset_properties (struct drm_device *dev) {
@@ -1963,7 +1963,7 @@ int drm_connector_update_edid_property(struct drm_connector *connector, size =EDID_LENGTH * (1 + edid->extensions);/* Set the display info, using edid if available, otherwise -* reseting the values to defaults. This duplicates the work +* resetting the values to defaults. This duplicates the work * done in drm_add_edid_modes, but that function is not * consistently called before this one in all drivers and the * computation is cheap enough that it seems better to
@@ -2076,7 +2076,7 @@ void drm_connector_set_vrr_capable_property(EXPORT_SYMBOL (drm_connector_set_vrr_capable_property);/** -* drm_connector_set_panel_orientation - sets the connecter's panel_orientation +* drm_connector_set_panel_orientation - sets the connector's panel_orientation * @connector: connector for which to set the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set *
@@ -2131,7 +2131,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);/** * drm_connector_set_panel_orientation_with_quirk - -* set the connecter's panel_orientation after checking for quirks +* set the connector's panel_orientation after checking for quirks * @connector: connector for which to init the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set * @width: width in pixels of the panel, used for panel quirk detection
Signature · 1 line
2.27.0
Daniel Vetter
AppliedQuoted 5 lines · Antonio Borneo
Some of these comments are part of the Linux GPU Driver Developer's Guide.
Fix some minor typo in the comments and remove a repeated 'the'.Signed-off-by Antonio Borneo <[email protected]>
Queued up for 5.9 in drm-misc-next, thanks for your patch. -Daniel
Quoted 110 lines
--- drivers/gpu/drm/drm_connector.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)drivers/gpu/drm/drm_connector.c +11
-11@@ -38,7 +38,7 @@* DOC: overview * * In DRM connectors are the general abstraction for display sinks, and include -* als fixed panels or anything else that can display pixels in some form. As +* also fixed panels or anything else that can display pixels in some form. As * opposed to all other KMS objects representing hardware (like CRTC, encoder or * plane abstractions) connectors can be hotplugged and unplugged at runtime. * Hence they are reference-counted using drm_connector_get() and @@ -129,7 +129,7 @@ EXPORT_SYMBOL(drm_get_connector_type_name);/** * drm_connector_get_cmdline_mode - reads the user's cmdline mode -* @connector: connector to quwery +* @connector: connector to query * * The kernel supports per-connector configuration of its consoles through * use of the video= parameter. This function parses that option and @@ -991,7 +991,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {* DP MST sinks), or high-res integrated panels (like dual-link DSI) which * are not gen-locked. Note that for tiled panels which are genlocked, like * dual-link LVDS or dual-link DSI, the driver should try to not expose the -* tiling and virtualize both &drm_crtc and &drm_plane if needed. Drivers +* tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers * should update this value using drm_connector_set_tile_property(). * Userspace cannot change this property. * link-status: @@ -1131,7 +1131,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {* * It will even need to do colorspace conversion and get all layers * to one common colorspace for blending. It can use either GL, Media -* or display engine to get this done based on the capabilties of the +* or display engine to get this done based on the capabilities of the * associated hardware. * * Driver expects metadata to be put in &struct hdr_output_metadata @@ -1614,7 +1614,7 @@ EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);* variable refresh rate capability for a connector. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_connector_attach_vrr_capable_property (struct drm_connector *connector)@@ -1759,7 +1759,7 @@ EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);* HDMI connectors. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_mode_create_hdmi_colorspace_property (struct drm_connector *connector) {@@ -1788,7 +1788,7 @@ EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property);* DP connectors. * * Returns: -* Zero on success, negative errono on failure. +* Zero on success, negative errno on failure. */ int drm_mode_create_dp_colorspace_property (struct drm_connector *connector) {@@ -1840,7 +1840,7 @@ EXPORT_SYMBOL(drm_mode_create_content_type_property);* drm_mode_create_suggested_offset_properties - create suggests offset properties * @dev: DRM device * -* Create the the suggested x/y offset property for connectors. +* Create the suggested x/y offset property for connectors. */ int drm_mode_create_suggested_offset_properties (struct drm_device *dev) {@@ -1963,7 +1963,7 @@ int drm_connector_update_edid_property(struct drm_connector *connector, size =EDID_LENGTH * (1 + edid->extensions);/* Set the display info, using edid if available, otherwise -* reseting the values to defaults. This duplicates the work +* resetting the values to defaults. This duplicates the work * done in drm_add_edid_modes, but that function is not * consistently called before this one in all drivers and the * computation is cheap enough that it seems better to @@ -2076,7 +2076,7 @@ void drm_connector_set_vrr_capable_property(EXPORT_SYMBOL (drm_connector_set_vrr_capable_property);/** -* drm_connector_set_panel_orientation - sets the connecter's panel_orientation +* drm_connector_set_panel_orientation - sets the connector's panel_orientation * @connector: connector for which to set the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set * @@ -2131,7 +2131,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);/** * drm_connector_set_panel_orientation_with_quirk - -* set the connecter's panel_orientation after checking for quirks +* set the connector's panel_orientation after checking for quirks * @connector: connector for which to init the panel-orientation property. * @panel_orientation: drm_panel_orientation value to set * @width: width in pixels of the panel, used for panel quirk detection Signature · 1 line
2.27.0
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel