Skip to contentSkip to conversation

drm: sun4i: hdmi: Remove extra HPD polling

PATCH Applied Chen-Yu Tsai 2 participants 2 messages Jun 29, 2020 – Jun 30, 2020

Subsystems (4)
lore
Share & tools
lore

Chen-Yu Tsai

author maintainer
#0 lore raw

PATCH 1/1 drm: sun4i: hdmi: Remove extra HPD polling

From: Chen-Yu Tsai <[email protected]>

The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more or less an input-only GPIO. Other GPIO-based HPD implementations directly return the current state, instead of polling for a specific state and returning the other if that times out.

Remove the I/O polling from sun4i_hdmi_connector_detect() and directly return a known state based on the current reading. This also gets rid of excessive CPU usage by kworker as reported on Stack Exchange [1] and Armbian forums [2].

[1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
[2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/

Fixes 9c5681011a0c ("drm/sun4i: Add HDMI support")
---
 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c +2 -3
index ce07ddc3e058..557cbe5ab35f 100644
@@ -259,9 +259,8 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
 	unsigned long reg;
 
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
-			       reg & SUN4I_HDMI_HPD_HIGH,
-			       0, 500000)) {
+	reg = readl(hdmi->base + SUN4I_HDMI_HPD_REG);
+	if (reg & SUN4I_HDMI_HPD_HIGH) {
 		cec_phys_addr_invalidate(hdmi->cec_adap);
 		return connector_status_disconnected;
 	}
Signature · 6 lines
2.27.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

Hi,

Quoted 12 lines · Chen-Yu Tsai

From: Chen-Yu Tsai <[email protected]>

The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more or less an input-only GPIO. Other GPIO-based HPD implementations directly return the current state, instead of polling for a specific state and returning the other if that times out.

Remove the I/O polling from sun4i_hdmi_connector_detect() and directly return a known state based on the current reading. This also gets rid of excessive CPU usage by kworker as reported on Stack Exchange [1] and Armbian forums [2].

Quoted 5 lines

[1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
[2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/

Fixes 9c5681011a0c ("drm/sun4i: Add HDMI support")

Applied, thanks for figuring that out

Maxime