Skip to contentSkip to conversation

regulator/qcom: Constify static structs

PATCH In review Rikard Falkeborn 2 participants 4 messages Jun 29, 2020 – Jul 1, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover regulator/qcom: Constify static structs

Constify some static structs to allow the compiler to put them in read-only memory.

Rikard Falkeborn (2):
regulator: qcom_rpm: Constify struct regulator_ops
regulator: qcom_spmi: Constify struct regulator_ops

 drivers/regulator/qcom_rpm-regulator.c  |  6 +++---
 drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------
 2 files changed, 15 insertions(+), 15 deletions(-)
Signature · 1 line
2.27.0
#1 lore raw

PATCH 1/2 regulator: qcom_rpm: Constify struct regulator_ops

These are never modified, so make them const to allow the compiler to put them in read-only memory.

Before:
text data bss dec hex filename
17485 500 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o

After:
text data bss dec hex filename
17881 104 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o

---
 drivers/regulator/qcom_rpm-regulator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/regulator/qcom_rpm-regulator.c +3 -3
index 0066f850f15d..7f9d66ac37ff 100644
@@ -407,7 +407,7 @@ static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
 	return ret;
 }
 
-static struct regulator_ops uV_ops = {
+static const struct regulator_ops uV_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 
 	.set_voltage_sel = rpm_reg_set_uV_sel,
@@ -420,7 +420,7 @@ static struct regulator_ops uV_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
-static struct regulator_ops mV_ops = {
+static const struct regulator_ops mV_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 
 	.set_voltage_sel = rpm_reg_set_mV_sel,
@@ -433,7 +433,7 @@ static struct regulator_ops mV_ops = {
 	.set_load = rpm_reg_set_load,
 };
 
-static struct regulator_ops switch_ops = {
+static const struct regulator_ops switch_ops = {
 	.enable = rpm_reg_switch_enable,
 	.disable = rpm_reg_switch_disable,
 	.is_enabled = rpm_reg_is_enabled,
Signature · 1 line
2.27.0
#2 lore raw

PATCH 2/2 regulator: qcom_spmi: Constify struct regulator_ops

In reply to Rikard Falkeborn

These are never modified, so make them const to allow the compiler to put them in read-only memory.

Before:

   text    data     bss     dec     hex filename
  20362    2592     152   23106    5a42 drivers/regulator/qcom_spmi-regulator.o

After:

   text    data     bss     dec     hex filename
  21814    1140     152   23106    5a42 drivers/regulator/qcom_spmi-regulator.o
---
 drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/regulator/qcom_spmi-regulator.c +12 -12
index 95737e4dd6bb..5ee7c5305d95 100644
@@ -380,7 +380,7 @@ struct spmi_regulator_mapping {
 	enum spmi_regulator_logical_type	logical_type;
 	u32					revision_min;
 	u32					revision_max;
-	struct regulator_ops			*ops;
+	const struct regulator_ops		*ops;
 	struct spmi_voltage_set_points		*set_points;
 	int					hpm_min_load;
 };
@@ -1261,7 +1261,7 @@ spmi_regulator_saw_set_voltage(struct regulator_dev *rdev, unsigned selector)
 
 static struct regulator_ops spmi_saw_ops = {};
 
-static struct regulator_ops spmi_smps_ops = {
+static const struct regulator_ops spmi_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1276,7 +1276,7 @@ static struct regulator_ops spmi_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ldo_ops = {
+static const struct regulator_ops spmi_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1293,7 +1293,7 @@ static struct regulator_ops spmi_ldo_ops = {
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 };
 
-static struct regulator_ops spmi_ln_ldo_ops = {
+static const struct regulator_ops spmi_ln_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1305,7 +1305,7 @@ static struct regulator_ops spmi_ln_ldo_ops = {
 	.get_bypass		= spmi_regulator_common_get_bypass,
 };
 
-static struct regulator_ops spmi_vs_ops = {
+static const struct regulator_ops spmi_vs_ops = {
 	.enable			= spmi_regulator_vs_enable,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1316,7 +1316,7 @@ static struct regulator_ops spmi_vs_ops = {
 	.get_mode		= spmi_regulator_common_get_mode,
 };
 
-static struct regulator_ops spmi_boost_ops = {
+static const struct regulator_ops spmi_boost_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1327,7 +1327,7 @@ static struct regulator_ops spmi_boost_ops = {
 	.set_input_current_limit = spmi_regulator_set_ilim,
 };
 
-static struct regulator_ops spmi_ftsmps_ops = {
+static const struct regulator_ops spmi_ftsmps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1342,7 +1342,7 @@ static struct regulator_ops spmi_ftsmps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_lo_smps_ops = {
+static const struct regulator_ops spmi_ult_lo_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1356,7 +1356,7 @@ static struct regulator_ops spmi_ult_lo_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_ho_smps_ops = {
+static const struct regulator_ops spmi_ult_ho_smps_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1371,7 +1371,7 @@ static struct regulator_ops spmi_ult_ho_smps_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_ult_ldo_ops = {
+static const struct regulator_ops spmi_ult_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1388,7 +1388,7 @@ static struct regulator_ops spmi_ult_ldo_ops = {
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 };
 
-static struct regulator_ops spmi_ftsmps426_ops = {
+static const struct regulator_ops spmi_ftsmps426_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -1403,7 +1403,7 @@ static struct regulator_ops spmi_ftsmps426_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
-static struct regulator_ops spmi_hfs430_ops = {
+static const struct regulator_ops spmi_hfs430_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
Signature · 1 line
2.27.0
maintainer
#3 lore raw
In reply to Rikard Falkeborn
Quoted 8 lines · Rikard Falkeborn

Constify some static structs to allow the compiler to put them in read-only memory.

Rikard Falkeborn (2):
regulator: qcom_rpm: Constify struct regulator_ops
regulator: qcom_spmi: Constify struct regulator_ops

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: qcom_rpm: Constify struct regulator_ops

      commit: 8d41df6469eec8d784137aeeebf87dca7460ce37
[2/2] regulator: qcom_spmi: Constify struct regulator_ops
      commit: 3b619e3e2d1a89f383a0a0c527818dcb2bc66f92

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark