Skip to contentSkip to conversation

usb: chipidea: core: add wakeup support for extcon

PATCH New Peter Chen 1 participant 1 message Jun 30, 2020

Subsystems (3)
lore
Share & tools
lore

Peter Chen

author
#0 lore raw

PATCH 1/1 usb: chipidea: core: add wakeup support for extcon

If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode.

Fixes 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
---
 drivers/usb/chipidea/core.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/usb/chipidea/core.c +24 -0
index e8ce300ad490..9e10dcfeb98f 100644
@@ -1313,6 +1313,29 @@ static void ci_controller_suspend(struct ci_hdrc *ci)
 	enable_irq(ci->irq);
 }
 
+/*
+ * Handle the wakeup interrupt triggered by extcon connector
+ * We need to call ci_irq again for extcon since the first
+ * interrupt (wakeup int) only let the controller be out of
+ * low power mode, but not handle any interrupts.
+ */
+static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *cable_id, *cable_vbus;
+	u32 otgsc = hw_read_otgsc(ci, ~0);
+
+	cable_id = &ci->platdata->id_extcon;
+	cable_vbus = &ci->platdata->vbus_extcon;
+
+	if (!IS_ERR(cable_id->edev) && ci->is_otg &&
+		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
+		ci_irq(ci->irq, ci);
+
+	if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
+		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
+		ci_irq(ci->irq, ci);
+}
+
 static int ci_controller_resume(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
@@ -1343,6 +1366,7 @@ static int ci_controller_resume(struct device *dev)
 		enable_irq(ci->irq);
 		if (ci_otg_is_fsm_mode(ci))
 			ci_otg_fsm_wakeup_by_srp(ci);
+		ci_extcon_wakeup_int(ci);
 	}
 
 	return 0;
Signature · 1 line
2.17.1