dt-bindings: thermal: Remove soc unit address
Subsystems (2)
PATCH 1/1 dt-bindings: thermal: Remove soc unit address
Remove the soc unit address to fix the following warning seen with 'make dt_binding_check':
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
--- Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +1 -1
@@ -41,7 +41,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1: SDM845 TSENS - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>;
Signature · 1 line
2.17.1
Quoted 10 lines · Fabio Estevam
Remove the soc unit address to fix the following warning seen with 'make
dt_binding_check':Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (
unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges propertySigned-off-by Fabio Estevam <[email protected]>--- Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks!
Quoted 7 lines · Rob Herring
Quoted 5 lines · Fabio Estevam
Remove the soc unit address to fix the following warning seen with 'make
dt_binding_check':Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (
unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Quoted 7 lines
Quoted 5 lines
Signed-off-by Fabio Estevam <[email protected]>--- Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Applied, thanks!
thermal-zones.yaml had the same warning, so I added a fix for it to this.
Rob