hwmon:max6697: Allow max6581 to set temperature read offset
PATCH 1/1 hwmon:max6697: Allow max6581 to set temperature read offset
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
dts: temperature-read-offset = <0xde 0x0>;
verify: iotools smbus_read8 <vbus> 0x4d 0x4e0x6F
--- drivers/hwmon/max6697.c | 19 +++++++++++++++++-- include/linux/platform_data/max6697.h | 4 ++++ 2 files changed, 21 insertions(+), 2 deletions(-)
drivers/hwmon/max6697.c +17 -2
@@ -493,8 +493,13 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); + } + prop =of_get_property (node,"temperature-read-offset" , &len); +if (prop && len ==2 *sizeof (u32)) { + pdata->offset_mask =be32_to_cpu (prop[0 ]); + pdata->offset_value =be32_to_cpu (prop[1 ]); } }
@@ -586,6 +591,16 @@ static int max6697_init_chip(struct max6697_data *data, pdata->ideality_mask >> 1);if (ret <0 )return ret; + ret =i2c_smbus_write_byte_data (client, +MAX6581_REG_OFFSET , + pdata->offset_value); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (client, +MAX6581_REG_OFFSET_SELECT , + pdata->offset_mask >>1 ); +if (ret <0 ) +return ret; } done: data->update_interval = factor *MAX6697_CONV_TIME ;
include/linux/platform_data/max6697.h +4 -0
@@ -28,6 +28,10 @@ struct max6697_platform_data {u8 ideality_value;/* transistor ideality as per * MAX6581 datasheet */ +u8 offset_mask;/* set bit to 0 to disable */ +u8 offset_value;/* temperature read offset as +* MAX6581 datasheet + */ };#endif /* MAX6697_H */
Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
Guenter Roeck
maintainerQuoted 6 lines · Chu Lin
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
dts: temperature-read-offset = <0xde0x0>;
This should not be implemented this way. Instead, the standard tempX_offset attribute should be used, with appropriate code to determine affected channels (since there is only one offset value, and since it can be enabled per channel). A secondary question is if and how to set the temperature offset via devicetree; that will have to be documented and approved by a DT maintainer. I would think, though, that the offset should be specified in milli-degrees C and not as raw chip data.
Thanks,
Guenter
Quoted 65 lines
verify: iotools
smbus_read8<vbus>0x4d0x4e0x6FSigned-off-by Chu Lin <[email protected]>--- drivers/hwmon/max6697.c | 19 +++++++++++++++++-- include/linux/platform_data/max6697.h | 4 ++++ 2 files changed, 21 insertions(+), 2 deletions(-)drivers/hwmon/max6697.c +17
-2@@ -493,8 +493,13 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); + } + prop =of_get_property (node,"temperature-read-offset" , &len); +if (prop && len ==2 *sizeof (u32)) { + pdata->offset_mask =be32_to_cpu (prop[0 ]); + pdata->offset_value =be32_to_cpu (prop[1 ]); } }@@ -586,6 +591,16 @@ static int max6697_init_chip(struct max6697_data *data, pdata->ideality_mask >> 1);if (ret <0 )return ret; + ret =i2c_smbus_write_byte_data (client, +MAX6581_REG_OFFSET , + pdata->offset_value); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (client, +MAX6581_REG_OFFSET_SELECT , + pdata->offset_mask >>1 ); +if (ret <0 ) +return ret; } done: data->update_interval = factor *MAX6697_CONV_TIME ;include/linux/platform_data/max6697.h +4
-0@@ -28,6 +28,10 @@ struct max6697_platform_data {u8 ideality_value;/* transistor ideality as per * MAX6581 datasheet */ +u8 offset_mask;/* set bit to 0 to disable */ +u8 offset_value;/* temperature read offset as +* MAX6581 datasheet + */ };#endif /* MAX6697_H */ Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
PATCH 1/1 hwmon:max6697: Allow max6581 to set temperature read offset
In reply to Chu LinPer max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 > temp2_offset
cat temp2_offset
16250
echo 17500 > temp3_offset
cat temp3_offset
17500
cat temp4_offset
0
cat temp2_offset
17500
echo 0 > temp2_offset
cat temp2_offset
0
cat temp3_offset
17500
echo -0 > temp2_offset
cat temp2_offset
0
echo -100000 > temp2_offset
-sh: echo: write error: Invalid argument
cat temp2_input
37000
echo 10000 > temp2_offset
cat temp2_input
47125
echo -2000 > temp2_offset
cat temp2_input
34875
echo -0 > temp2_offset
cat temp2_input
37000
--- drivers/hwmon/max6697.c | 131 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 126 insertions(+), 5 deletions(-)
drivers/hwmon/max6697.c +126 -5
@@ -41,6 +41,14 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6697_MAP_BITS (reg) ((((reg) & 0x7e) >> 1) | \ (((reg) & 0x01) << 6) | ((reg) & 0x80)) +#define MAX6581_OFFSET_TO_MILLIC (reg) (16000 * (((reg) & (1<<6)) >> 6) + \ + 8000 * (((reg) & (1<<5)) >> 5) + \ + 4000 * (((reg) & (1<<4)) >> 4) + \ + 2000 * (((reg) & (1<<3)) >> 3) + \ + 1000 * (((reg) & (1<<2)) >> 2) + \ + 500 * (((reg) & (1<<1)) >> 1) + \ + 250 * ((reg) & 1)) +#define MAX6697_REG_STAT (n) (0x44 + (n))#define MAX6697_REG_CONFIG 0x41
@@ -56,6 +64,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX -MAX6581_OFFSET_MIN +#define MAX6697_CONV_TIME 156/* ms per channel, worst case */
@@ -316,6 +327,94 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select; +int i, temp_frac, temp_int, ret, index; +bool sign; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; + ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +if (temp >MAX6581_OFFSET_MAX || temp <MAX6581_OFFSET_MIN ) +return -EINVAL ; + +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 <<(index-1 ))); +return ret <0 ? ret : count; + } + sign = temp <0 ? false : true; + temp =abs (temp); + temp_int = temp /1000 ; + temp_frac = temp %1000 ; +for (i =4 ; i >=0 && temp_int >0 ; --i) { +if (temp_int >=1 <<i) { + temp_int -=1 <<i; + val |=1 << (i+2 ); + } + } +/* special handle the fraction */ +if (temp_frac %250 !=0 ) +return -EINVAL ; +if (temp_frac ==750 ) + val |=0x3 ; +else if (temp_frac ==500 ) + val |=0x2 ; +else if (temp_frac) + val |=0x1 ; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select |1 <<(index-1 )); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + sign?val:(~val +1 )); +return ret <0 ? ret : count; +} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index, temp; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; +if (select & (1 <<(index-1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return -ENODATA ; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +if (1 <<7 & ret) { + ret = ~ret +1 ; + temp = -MAX6581_OFFSET_TO_MILLIC (ret); + }else { + temp =MAX6581_OFFSET_TO_MILLIC (ret); + } +return sprintf (buf,"%d\n" , temp); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
@@ -374,6 +473,16 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */ +static SENSOR_DEVICE_ATTR_RW(temp1_offset, offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
@@ -382,8 +491,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;
@@ -392,6 +501,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }
@@ -408,6 +521,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -415,6 +529,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -422,6 +537,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,
@@ -429,6 +545,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,
@@ -436,6 +553,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,
@@ -443,6 +561,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,
@@ -450,6 +569,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,
@@ -457,6 +577,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };
@@ -493,8 +614,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }
@@ -689,7 +810,7 @@ MODULE_DEVICE_TABLE(of, max6697_of_match);static struct i2c_driver max6697_driver = { .class =I2C_CLASS_HWMON , .driver = { - .name ="max6697" , + .name ="max6697_test" , .of_match_table =of_match_ptr (max6697_of_match), }, .probe = max6697_probe,
Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
PATCH 1/1 hwmon:max6697: Allow max6581 to set temperature read offset
In reply to Chu LinPer max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 > temp2_offset
cat temp2_offset
16250
echo 17500 > temp3_offset
cat temp3_offset
17500
cat temp4_offset
0
cat temp2_offset
17500
echo 0 > temp2_offset
cat temp2_offset
0
cat temp3_offset
17500
echo -0 > temp2_offset
cat temp2_offset
0
echo -100000 > temp2_offset
-sh: echo: write error: Invalid argument
cat temp2_input
37000
echo 10000 > temp2_offset
cat temp2_input
47125
echo -2000 > temp2_offset
cat temp2_input
34875
echo -0 > temp2_offset
cat temp2_input
37000
--- drivers/hwmon/max6697.c | 129 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 125 insertions(+), 4 deletions(-)
drivers/hwmon/max6697.c +125 -4
@@ -41,6 +41,14 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6697_MAP_BITS (reg) ((((reg) & 0x7e) >> 1) | \ (((reg) & 0x01) << 6) | ((reg) & 0x80)) +#define MAX6581_OFFSET_TO_MILLIC (reg) (16000 * (((reg) & (1<<6)) >> 6) + \ + 8000 * (((reg) & (1<<5)) >> 5) + \ + 4000 * (((reg) & (1<<4)) >> 4) + \ + 2000 * (((reg) & (1<<3)) >> 3) + \ + 1000 * (((reg) & (1<<2)) >> 2) + \ + 500 * (((reg) & (1<<1)) >> 1) + \ + 250 * ((reg) & 1)) +#define MAX6697_REG_STAT (n) (0x44 + (n))#define MAX6697_REG_CONFIG 0x41
@@ -56,6 +64,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX -MAX6581_OFFSET_MIN +#define MAX6697_CONV_TIME 156/* ms per channel, worst case */
@@ -316,6 +327,94 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select; +int i, temp_frac, temp_int, ret, index; +bool sign; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; + ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +if (temp >MAX6581_OFFSET_MAX || temp <MAX6581_OFFSET_MIN ) +return -EINVAL ; + +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 <<(index-1 ))); +return ret <0 ? ret : count; + } + sign = temp <0 ? false : true; + temp =abs (temp); + temp_int = temp /1000 ; + temp_frac = temp %1000 ; +for (i =4 ; i >=0 && temp_int >0 ; --i) { +if (temp_int >=1 <<i) { + temp_int -=1 <<i; + val |=1 << (i+2 ); + } + } +/* special handle the fraction */ +if (temp_frac %250 !=0 ) +return -EINVAL ; +if (temp_frac ==750 ) + val |=0x3 ; +else if (temp_frac ==500 ) + val |=0x2 ; +else if (temp_frac) + val |=0x1 ; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select |1 <<(index-1 )); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + sign?val:(~val +1 )); +return ret <0 ? ret : count; +} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index, temp; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; +if (select & (1 <<(index-1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return -ENODATA ; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +if (1 <<7 & ret) { + ret = ~ret +1 ; + temp = -MAX6581_OFFSET_TO_MILLIC (ret); + }else { + temp =MAX6581_OFFSET_TO_MILLIC (ret); + } +return sprintf (buf,"%d\n" , temp); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
@@ -374,6 +473,16 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */ +static SENSOR_DEVICE_ATTR_RW(temp1_offset, offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
@@ -382,8 +491,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;
@@ -392,6 +501,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }
@@ -408,6 +521,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -415,6 +529,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -422,6 +537,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,
@@ -429,6 +545,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,
@@ -436,6 +553,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,
@@ -443,6 +561,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,
@@ -450,6 +569,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,
@@ -457,6 +577,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };
@@ -493,8 +614,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }
Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
PATCH 1/1 hwmon:max6697: Allow max6581 to create tempX_offset attributes
In reply to Chu LinPer max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 > temp2_offset
cat temp2_offset
16250
echo 17500 > temp3_offset
cat temp3_offset
17500
cat temp4_offset
0
cat temp2_offset
17500
echo 0 > temp2_offset
cat temp2_offset
0
cat temp3_offset
17500
echo -0 > temp2_offset
cat temp2_offset
0
echo -100000 > temp2_offset
-sh: echo: write error: Invalid argument
cat temp2_input
37000
echo 10000 > temp2_offset
cat temp2_input
47125
echo -2000 > temp2_offset
cat temp2_input
34875
echo -0 > temp2_offset
cat temp2_input
37000
--- drivers/hwmon/max6697.c | 129 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 125 insertions(+), 4 deletions(-)
drivers/hwmon/max6697.c +125 -4
@@ -41,6 +41,14 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6697_MAP_BITS (reg) ((((reg) & 0x7e) >> 1) | \ (((reg) & 0x01) << 6) | ((reg) & 0x80)) +#define MAX6581_OFFSET_TO_MILLIC (reg) (16000 * (((reg) & (1<<6)) >> 6) + \ + 8000 * (((reg) & (1<<5)) >> 5) + \ + 4000 * (((reg) & (1<<4)) >> 4) + \ + 2000 * (((reg) & (1<<3)) >> 3) + \ + 1000 * (((reg) & (1<<2)) >> 2) + \ + 500 * (((reg) & (1<<1)) >> 1) + \ + 250 * ((reg) & 1)) +#define MAX6697_REG_STAT (n) (0x44 + (n))#define MAX6697_REG_CONFIG 0x41
@@ -56,6 +64,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX -MAX6581_OFFSET_MIN +#define MAX6697_CONV_TIME 156/* ms per channel, worst case */
@@ -316,6 +327,94 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select; +int i, temp_frac, temp_int, ret, index; +bool sign; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; + ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +if (temp >MAX6581_OFFSET_MAX || temp <MAX6581_OFFSET_MIN ) +return -EINVAL ; + +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 <<(index-1 ))); +return ret <0 ? ret : count; + } + sign = temp <0 ? false : true; + temp =abs (temp); + temp_int = temp /1000 ; + temp_frac = temp %1000 ; +for (i =4 ; i >=0 && temp_int >0 ; --i) { +if (temp_int >=1 <<i) { + temp_int -=1 <<i; + val |=1 << (i+2 ); + } + } +/* special handle the fraction */ +if (temp_frac %250 !=0 ) +return -EINVAL ; +if (temp_frac ==750 ) + val |=0x3 ; +else if (temp_frac ==500 ) + val |=0x2 ; +else if (temp_frac) + val |=0x1 ; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select |1 <<(index-1 )); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + sign?val:(~val +1 )); +return ret <0 ? ret : count; +} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index, temp; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ; +if (select & (1 <<(index-1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return -ENODATA ; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +if (1 <<7 & ret) { + ret = ~ret +1 ; + temp = -MAX6581_OFFSET_TO_MILLIC (ret); + }else { + temp =MAX6581_OFFSET_TO_MILLIC (ret); + } +return sprintf (buf,"%d\n" , temp); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
@@ -374,6 +473,16 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */ +static SENSOR_DEVICE_ATTR_RW(temp1_offset, offset, 0); +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
@@ -382,8 +491,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;
@@ -392,6 +501,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }
@@ -408,6 +521,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -415,6 +529,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -422,6 +537,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,
@@ -429,6 +545,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,
@@ -436,6 +553,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,
@@ -443,6 +561,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,
@@ -450,6 +569,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,
@@ -457,6 +577,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };
@@ -493,8 +614,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }
Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
Guenter Roeck
maintainerRe: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes
Quoted 4 lines · Chu Lin
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Patchwork received four versions of this patch, with two different subject lines.
How am I supposed to know which one to look at ?
Guenter
Re: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes
Quoted 10 lines · Guenter Roeck
Quoted 4 lines · Chu Lin
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Patchwork received four versions of this patch, with two different subject lines.
How am I supposed to know which one to look at ?
Sorry for the confusion.
I was learning how to send amendments to a patch and forget that it may create confusion for the reviewers. The latest one with headline hwmon:max6697: Allow max6581 to create tempX_offset attributes is the one that should be reviewed.
Chu
Guenter Roeck
maintainerRe: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes
In reply to Chu LinQuoted 41 lines · Chu Lin
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 >temp2_offset
cattemp2_offset
16250echo 17500 >
temp3_offset
cattemp3_offset
17500
cattemp4_offset
0
cattemp2_offset
17500echo 0 >
temp2_offset
cattemp2_offset
0
cattemp3_offset
17500echo -0 >
temp2_offset
cattemp2_offset
0echo -100000 >
temp2_offset
-sh: echo: write error: Invalid argumentcat
temp2_input
37000echo 10000 >
temp2_offset
cattemp2_input
47125echo -2000 >
temp2_offset
cattemp2_input
34875
Quoted 5 lines
echo -0 >
temp2_offset
cattemp2_input
37000Signed-off-by Chu Lin <[email protected]>
Please run "checkpatch --strict" and fix everything it reports.
Quoted 9 lines
--- drivers/hwmon/max6697.c | 129 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 125 insertions(+), 4 deletions(-)drivers/hwmon/max6697.c +0
-0
drivers/hwmon/max6697.c static const u8 MAX6697_REG_CRIT[] = { · line 50
Quoted 10 lines
drivers/hwmon/max6697.c +7
-0@@ -41,6 +41,14 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6697_MAP_BITS (reg) ((((reg) & 0x7e) >> 1) | \ (((reg) & 0x01) << 6) | ((reg) & 0x80)) +#define MAX6581_OFFSET_TO_MILLIC (reg) (16000 * (((reg) & (1<<6)) >> 6) + \ + 8000 * (((reg) & (1<<5)) >> 5) + \ + 4000 * (((reg) & (1<<4)) >> 4) + \ + 2000 * (((reg) & (1<<3)) >> 3) + \ + 1000 * (((reg) & (1<<2)) >> 2) + \ + 500 * (((reg) & (1<<1)) >> 1) + \ + 250 * ((reg) & 1))
Why not just the following ?
#define MAX6581_OFFSET_TO_MILLIC(reg) ((reg) * 250)
drivers/hwmon/max6697.c static const u8 MAX6697_REG_CRIT[] = { · line 69
Quoted 11 lines
drivers/hwmon/max6697.c +4
-0+#define MAX6697_REG_STAT (n) (0x44 + (n))#define MAX6697_REG_CONFIG 0x41@@ -56,6 +64,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX -MAX6581_OFFSET_MIN +
Why the double negation ?
#define MAX6581_OFFSET_MIN -31750
#define MAX6581_OFFSET_MAX 31750
or
#define MAX6581_OFFSET_MAX 31750
#define MAX6581_OFFSET_MIN -MAX6581_OFFSET_MAX
Quoted 13 lines
drivers/hwmon/max6697.c +6
-0#define MAX6697_CONV_TIME 156/* ms per channel, worst case */ @@ -316,6 +327,94 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select;
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 345
Quoted 10 lines
drivers/hwmon/max6697.c +10
-0+int i, temp_frac, temp_int, ret, index; +bool sign; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return -ENODATA ;
Please return the error.
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 350
Quoted 5 lines
drivers/hwmon/max6697.c +5
-0+ ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +if (temp >MAX6581_OFFSET_MAX || temp <MAX6581_OFFSET_MIN ) +return -EINVAL ;
Please use clamp_val() to limit the range. We don't expect users to know chip limits / restrictions.
Quoted 17 lines
drivers/hwmon/max6697.c +17
-0+ +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 <<(index-1 ))); +return ret <0 ? ret : count; + } + sign = temp <0 ? false : true; + temp =abs (temp); + temp_int = temp /1000 ; + temp_frac = temp %1000 ; +for (i =4 ; i >=0 && temp_int >0 ; --i) { +if (temp_int >=1 <<i) { + temp_int -=1 <<i; + val |=1 << (i+2 ); + }
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 377
Quoted 10 lines
drivers/hwmon/max6697.c +10
-0+ } +/* special handle the fraction */ +if (temp_frac %250 !=0 ) +return -EINVAL ; +if (temp_frac ==750 ) + val |=0x3 ; +else if (temp_frac ==500 ) + val |=0x2 ; +else if (temp_frac) + val |=0x1 ;
This is way too complicated.
sign = temp < 0; temp = clamp_val(abs(temp), 0, MAX6581_OFFSET_MAX); reg = DIV_ROUND_CLOSEST(temp, 250); if (sign) reg |= (1 << 7);
should accomplish the same.
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 386
Quoted 9 lines
drivers/hwmon/max6697.c +9
-0+ ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select |1 <<(index-1 )); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + sign?val:(~val +1 )); +return ret <0 ? ret : count;
Since this function requires multiple i2c accesses, it needs to be mutex protected.
Quoted 13 lines
drivers/hwmon/max6697.c +13
-0+} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index, temp; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 )
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 409
Quoted 10 lines
drivers/hwmon/max6697.c +10
-0+return -ENODATA ; +if (select & (1 <<(index-1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return -ENODATA ; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +if (1 <<7 & ret) {
Not believer in Yoda Programming I am.
drivers/hwmon/max6697.c static ssize_t temp_store(struct device *dev, · line 414
Quoted 5 lines
drivers/hwmon/max6697.c +5
-0+ ret = ~ret +1 ; + temp = -MAX6581_OFFSET_TO_MILLIC (ret); + }else { + temp =MAX6581_OFFSET_TO_MILLIC (ret); + }
Negative vlaues should be handled in MAX6581_OFFSET_TO_MILLIC(). If necessary / too complex, make it a function.
drivers/hwmon/max6697.c static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); · line 476
Quoted 11 lines
drivers/hwmon/max6697.c +4
-0+return sprintf (buf,"%d\n" , temp); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);@@ -374,6 +473,16 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */
If so ...
drivers/hwmon/max6697.c static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); · line 477
Quoted 1 line
drivers/hwmon/max6697.c +1
-0+static SENSOR_DEVICE_ATTR_RW(temp1_offset, offset, 0);
then why an attribute for temp1_offset ? Guess it is a dummy, which is a waste. Just use dummy again.
Quoted 108 lines
drivers/hwmon/max6697.c +24
-4+static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,@@ -382,8 +491,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;@@ -392,6 +501,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }@@ -408,6 +521,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,@@ -415,6 +529,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,@@ -422,6 +537,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,@@ -429,6 +545,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,@@ -436,6 +553,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,@@ -443,6 +561,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,@@ -450,6 +569,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,@@ -457,6 +577,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };@@ -493,8 +614,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }
PATCH 1/1 hwmon:max6697: Allow max6581 to create tempX_offset
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 > temp2_offset
cat temp2_offset
16250
echo 17500 > temp3_offset
cat temp3_offset
17500
cat temp4_offset
0
cat temp2_offset
17500
echo 0 > temp2_offset
cat temp2_offset
0
cat temp3_offset
17500
echo -0 > temp2_offset
cat temp2_offset
0
echo -100000 > temp2_offset
cat temp2_input
4875
echo 10000 > temp2_offset
cat temp2_input
47125
echo -2000 > temp2_offset
cat temp2_input
34875
echo -0 > temp2_offset
cat temp2_input
37000
--- drivers/hwmon/max6697.c | 100 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 96 insertions(+), 4 deletions(-)
drivers/hwmon/max6697.c +96 -4
@@ -65,6 +65,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX 31750 +#define MAX6697_CONV_TIME 156/* ms per channel, worst case */
@@ -180,6 +183,11 @@ static const struct max6697_chip_data max6697_chip_data[] = { }, }; +static inline int max6581_offset_to_millic (int val) +{ +return val & (1 <<7 ) ? (val |0xffffff00 ) *250 : val *250 ; +} +static struct max6697_data *max6697_update_device (struct device *dev) {struct max6697_data *data =dev_get_drvdata (dev);
@@ -325,6 +333,69 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select; +int ret, index; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return select; + ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 << (index -1 ))); +return ret <0 ? ret : count; + } + temp =clamp_val (temp,MAX6581_OFFSET_MIN ,MAX6581_OFFSET_MAX ); + val =DIV_ROUND_CLOSEST (temp,250 ); +mutex_lock (&data->update_lock); + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select | (1 << (index -1 ))); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + val); +mutex_unlock (&data->update_lock); +return ret <0 ? ret : count; +} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return select; +if (select & (1 << (index -1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return ret; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +return sprintf (buf,"%d\n" ,max6581_offset_to_millic (ret)); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
@@ -383,6 +454,15 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */ +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
@@ -391,8 +471,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;
@@ -401,6 +481,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }
@@ -417,6 +501,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &dev_attr_dummy.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -424,6 +509,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -431,6 +517,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,
@@ -438,6 +525,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,
@@ -445,6 +533,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,
@@ -452,6 +541,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,
@@ -459,6 +549,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,
@@ -466,6 +557,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };
@@ -502,8 +594,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }
Signature · 1 line
2.27.0.212.ge8ba1cc988-goog
Guenter Roeck
maintainerRe: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset
Quoted 4 lines · Chu Lin
Per max6581, reg 4d and reg 4e is used for temperature read offset. This patch will let the user specify the temperature read offset for max6581. This patch is tested on max6581 and only applies to max6581.
Please version your patches and provide a log of changes made.
Guenter
Quoted 256 lines
Testing:
echo 16250 >temp2_offset
cattemp2_offset
16250echo 17500 >
temp3_offset
cattemp3_offset
17500
cattemp4_offset
0
cattemp2_offset
17500echo 0 >
temp2_offset
cattemp2_offset
0
cattemp3_offset
17500echo -0 >
temp2_offset
cattemp2_offset
0echo -100000 >
temp2_offset
cattemp2_input
4875echo 10000 >
temp2_offset
cattemp2_input
47125echo -2000 >
temp2_offset
cattemp2_input
34875echo -0 >
temp2_offset
cattemp2_input
37000Signed-off-by Chu Lin <[email protected]>--- drivers/hwmon/max6697.c | 100 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 96 insertions(+), 4 deletions(-)drivers/hwmon/max6697.c +96
-4@@ -65,6 +65,9 @@ static const u8 MAX6697_REG_CRIT[] = {#define MAX6581_REG_IDEALITY_SELECT 0x4c#define MAX6581_REG_OFFSET 0x4d#define MAX6581_REG_OFFSET_SELECT 0x4e +#define MAX6581_OFFSET_MIN -31750 +#define MAX6581_OFFSET_MAX 31750 +#define MAX6697_CONV_TIME 156/* ms per channel, worst case */ @@ -180,6 +183,11 @@ static const struct max6697_chip_data max6697_chip_data[] = { }, }; +static inline int max6581_offset_to_millic (int val) +{ +return val & (1 <<7 ) ? (val |0xffffff00 ) *250 : val *250 ; +} +static struct max6697_data *max6697_update_device (struct device *dev) {struct max6697_data *data =dev_get_drvdata (dev);@@ -325,6 +333,69 @@ static ssize_t temp_store(struct device *dev,return ret <0 ? ret : count; } +static ssize_t offset_store (struct device *dev, +struct device_attribute *devattr,const char *buf, +size_t count) +{ +long temp; +u8 val, select; +int ret, index; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return select; + ret =kstrtol (buf,10 , &temp); +if (ret <0 ) +return ret; +/* disable the offset for channel */ +if (temp ==0 ) { + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select & ~(1 << (index -1 ))); +return ret <0 ? ret : count; + } + temp =clamp_val (temp,MAX6581_OFFSET_MIN ,MAX6581_OFFSET_MAX ); + val =DIV_ROUND_CLOSEST (temp,250 ); +mutex_lock (&data->update_lock); + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT , + select | (1 << (index -1 ))); +if (ret <0 ) +return ret; + ret =i2c_smbus_write_byte_data (data->client, +MAX6581_REG_OFFSET , + val); +mutex_unlock (&data->update_lock); +return ret <0 ? ret : count; +} + +static ssize_t offset_show (struct device *dev,struct device_attribute *devattr, +char *buf) +{ +int select, ret, index; +struct max6697_data *data; + + index =to_sensor_dev_attr (devattr)->index; + data =dev_get_drvdata (dev); + select =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET_SELECT ); +if (select <0 ) +return select; +if (select & (1 << (index -1 ))) { + ret =i2c_smbus_read_byte_data (data->client, +MAX6581_REG_OFFSET ); +if (ret <0 ) +return ret; + }else { +return sprintf (buf,"%d\n" ,0 ); + } +return sprintf (buf,"%d\n" ,max6581_offset_to_millic (ret)); +} + static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX); static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);@@ -383,6 +454,15 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5); static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7); +/* There is no offset for local temperature so starting from temp2 */ +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1); +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2); +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3); +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4); +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5); +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6); +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7); + static DEVICE_ATTR(dummy, 0, NULL, NULL); static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,@@ -391,8 +471,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr, struct device *dev = container_of(kobj, struct device, kobj);struct max6697_data *data =dev_get_drvdata (dev);const struct max6697_chip_data *chip = data->chip; -int channel = index /6 ;/* channel number */ -int nr = index %6 ;/* attribute index within channel */ +int channel = index /8 ;/* channel number */ +int nr = index %7 ;/* attribute index within channel */ if (channel >= chip->channels)return 0 ;@@ -401,6 +481,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,return 0 ;if (nr ==5 && !(chip->have_fault & (1 << channel)))return 0 ; +/* offset reg is only supported on max6581 remote channels */ +if (nr ==6 ) +if (data->type != max6581 || channel ==0 ) +return 0 ;return attr->mode; }@@ -417,6 +501,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &dev_attr_dummy.attr, + &dev_attr_dummy.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr,@@ -424,6 +509,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr,@@ -431,6 +517,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr,@@ -438,6 +525,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_offset.dev_attr.attr, &sensor_dev_attr_temp5_input.dev_attr.attr, &sensor_dev_attr_temp5_max.dev_attr.attr,@@ -445,6 +533,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp5_crit.dev_attr.attr, &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp5_offset.dev_attr.attr, &sensor_dev_attr_temp6_input.dev_attr.attr, &sensor_dev_attr_temp6_max.dev_attr.attr,@@ -452,6 +541,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp6_crit.dev_attr.attr, &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp6_offset.dev_attr.attr, &sensor_dev_attr_temp7_input.dev_attr.attr, &sensor_dev_attr_temp7_max.dev_attr.attr,@@ -459,6 +549,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp7_crit.dev_attr.attr, &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp7_offset.dev_attr.attr, &sensor_dev_attr_temp8_input.dev_attr.attr, &sensor_dev_attr_temp8_max.dev_attr.attr,@@ -466,6 +557,7 @@ static struct attribute *max6697_attributes[] = { &sensor_dev_attr_temp8_crit.dev_attr.attr, &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp8_offset.dev_attr.attr, NULL };@@ -502,8 +594,8 @@ static void max6697_get_config_of(struct device_node *node, } prop =of_get_property (node,"transistor-ideality" , &len);if (prop && len ==2 *sizeof (u32)) { - pdata->ideality_mask =be32_to_cpu (prop[0 ]); - pdata->ideality_value =be32_to_cpu (prop[1 ]); + pdata->ideality_mask =be32_to_cpu (prop[0 ]); + pdata->ideality_value =be32_to_cpu (prop[1 ]); } }Signature · 1 line
2.27.0.212.ge8ba1cc988-goog