am335x: Update list of defconfigs
Subsystems (3)
PATCH 1/4 am335x: Update list of defconfigs
Both the am335x_boneblack and am335x_evm_usbspl configs have been gone for a while, remove their entries from MAINTAINERS.
--- board/ti/am335x/MAINTAINERS | 2 -- 1 file changed, 2 deletions(-)
board/ti/am335x/MAINTAINERS +0 -2
@@ -3,7 +3,5 @@ M: Tom Rini <[email protected]> S: Maintained F: board/ti/am335x/ F: include/configs/am335x_evm.h -F: configs/am335x_boneblack_defconfig F: configs/am335x_boneblack_vboot_defconfig F: configs/am335x_evm_defconfig -F: configs/am335x_evm_usbspl_defconfig
Signature · 1 line
2.17.1
PATCH 1/4 am335x: Update list of defconfigs
Quoted 4 lines · Tom Rini
Both the
am335x_boneblackandam335x_evm_usbsplconfigs have been gone for a while, remove their entries fromMAINTAINERS.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/next, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/a6839f03/attachment.sig>
PATCH 2/4 omap3_beagle: Disable USB support
In reply to Tom RiniDisable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
--- configs/omap3_beagle_defconfig | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-)
configs/omap3_beagle_defconfig +2 -18
@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_SPL=y CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start"
@@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_UUID=y
@@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1
@@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_OMAP2PLUS=y -CONFIG_TWL4030_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="TI" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y CONFIG_VIDEO_OMAP3=y CONFIG_FAT_WRITE=y CONFIG_BCH=y
Signature · 1 line
2.17.1
PATCH 2/4 omap3_beagle: Disable USB support
Quoted 9 lines · Tom Rini
Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Cc Adam Ford <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I don't have a beagle, but I have DM_USB working on two different OMAP3 boards. I am curious to know what's left or what's not working.
adam
Quoted 61 lines
configs/omap3_beagle_defconfig | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-)configs/omap3_beagle_defconfig +2
-19@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_SPL=y CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start"@@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_UUID=y@@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1@@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_OMAP2PLUS=y -CONFIG_TWL4030_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="TI" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y CONFIG_VIDEO_OMAP3=y CONFIG_FAT_WRITE=y CONFIG_BCH=y --2.17.1
PATCH 2/4 omap3_beagle: Disable USB support
Quoted 7 lines · Adam Ford
Quoted 6 lines · Tom Rini
Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Quoted 6 lines
Quoted 3 lines
Cc Adam Ford <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I don't have a beagle, but I have
DM_USBworking on two different OMAP3 boards. I am curious to know what's left or what's not working.
Oh? I thought when we talked last there was still more to do to fully migrate things over. Where should I check again to see what I need to do on beagle to convert it over? Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/3eac2728/attachment.sig>
PATCH 2/4 omap3_beagle: Disable USB support
Quoted 13 lines · Tom Rini
Quoted 11 lines · Adam Ford
Quoted 9 lines · Tom Rini
Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Cc Adam Ford <[email protected]>Signed-off-by Tom Rini <[email protected]>---
Quoted 6 lines
Quoted 2 lines
I don't have a beagle, but I have
DM_USBworking on two different OMAP3 boards. I am curious to know what's left or what's not working.Oh? I thought when we talked last there was still more to do to fully migrate things over. Where should I check again to see what I need to do on beagle to convert it over? Thanks!
With [1], the DM support for the EHCI controller was added. There is still some work to be done to make it better, because there are still some #defines that need to assign the reset GPIO's. Ideally we'd get rid of the GPIO defines and use the device tree to address the reset. It isn't perfect, but it's better than having no USB at all. The am3517_evm and omap3_logic_somlv have them working. Make sure the board files have the legacy USB stuff removed [2]
[1] - https://gitlab.denx.de/u-boot/u-boot/-/commit/94ed66194f150c308d1713965a28abce3ac6e200
[2] - https://gitlab.denx.de/u-boot/u-boot/-/commit/76f6d52e61a1968702af69d6cea463b9d9332a96
Let me know if there is anything I can do to help.
adam
Quoted 3 lines
--
Tom
PATCH 2/4 omap3_beagle: Disable USB support
Quoted 29 lines · Adam Ford
Quoted 13 lines · Tom Rini
Quoted 11 lines · Adam Ford
Quoted 9 lines · Tom Rini
Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Cc Adam Ford <[email protected]>Signed-off-by Tom Rini <[email protected]>---
Quoted 6 lines
Quoted 2 lines
I don't have a beagle, but I have
DM_USBworking on two different OMAP3 boards. I am curious to know what's left or what's not working.Oh? I thought when we talked last there was still more to do to fully migrate things over. Where should I check again to see what I need to do on beagle to convert it over? Thanks!
With [1], the DM support for the EHCI controller was added. There is still some work to be done to make it better, because there are still some #defines that need to assign the reset GPIO's. Ideally we'd get rid of the GPIO defines and use the device tree to address the reset. It isn't perfect, but it's better than having no USB at all. The
am3517_evmandomap3_logic_somlvhave them working. Make sure the board files have the legacy USB stuff removed [2]
Quoted 4 lines
[1] - https://gitlab.denx.de/u-boot/u-boot/-/commit/94ed66194f150c308d1713965a28abce3ac6e200
[2] - https://gitlab.denx.de/u-boot/u-boot/-/commit/76f6d52e61a1968702af69d6cea463b9d9332a96Let me know if there is anything I can do to help.
Hunh, thanks. I thought I had tried this much before but had things blow up. With [2] it's a quick conversion and passing basic sanity checks. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/5c616ad8/attachment.sig>
PATCH 2/4 omap3_beagle: Disable USB support
In reply to Tom RiniQuoted 7 lines · Tom Rini
Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Cc Adam Ford <[email protected]>Signed-off-by Tom Rini <[email protected]>
As Adam noted, I should just convert this instead. It does in fact convert easily at this point, so I'm rejecting this patch and will post a conversion instead soon.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/d2186e3f/attachment.sig>
PATCH 3/4 ti816x_evm: Enable DM_MMC
In reply to Tom RiniThis platform is already using DM in general and the MMC controller is the early generation of what is compatible with "ti,omap4-hsmmc" so enable DM_MMC (which in turn gets BLK enabled).
--- configs/ti816x_evm_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/ti816x_evm_defconfig +1 -0
@@ -47,6 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_OMAP24XX=y +CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y
Signature · 1 line
2.17.1
PATCH 3/4 ti816x_evm: Enable DM_MMC
Quoted 5 lines · Tom Rini
This platform is already using DM in general and the MMC controller is the early generation of what is compatible with "ti,omap4-hsmmc" so enable
DM_MMC(which in turn gets BLK enabled).Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/next, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/46800ee0/attachment.sig>
PATCH 4/4 ti814x: Remove platform
In reply to Tom RiniThe TI814x (DM814x) platform is rather old and in need of a lot of migration work. As much of that work is well past the deadline, remove this platform.
--- arch/arm/mach-omap2/Kconfig | 1 - board/ti/ti814x/Kconfig | 15 --- board/ti/ti814x/MAINTAINERS | 6 -- board/ti/ti814x/Makefile | 11 -- board/ti/ti814x/evm.c | 190 ----------------------------------- board/ti/ti814x/evm.h | 8 -- board/ti/ti814x/mux.c | 86 ---------------- configs/ti814x_evm_defconfig | 45 --------- 8 files changed, 362 deletions(-) delete mode 100644 board/ti/ti814x/Kconfig delete mode 100644 board/ti/ti814x/MAINTAINERS delete mode 100644 board/ti/ti814x/Makefile delete mode 100644 board/ti/ti814x/evm.c delete mode 100644 board/ti/ti814x/evm.h delete mode 100644 board/ti/ti814x/mux.c delete mode 100644 configs/ti814x_evm_defconfig
arch/arm/mach-omap2/Kconfig +0 -1
@@ -181,7 +181,6 @@ source "board/BuR/brppt1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" -source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig"
board/ti/ti814x/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_TI814X_EVM - -config SYS_BOARD - default "ti814x" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "ti814x_evm" - -endif
board/ti/ti814x/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -TI814X BOARD -M: Tom Rini <[email protected]> -S: Maintained -F: board/ti/ti814x/ -F: include/configs/ti814x_evm.h -F: configs/ti814x_evm_defconfig
board/ti/ti814x/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - -ifdef CONFIG_SPL_BUILD -obj-y := mux.o -endif - -obj-y += evm.o
board/ti/ti814x/evm.c deleted +0 -190
190 lines not on this page · raw message
board/ti/ti814x/evm.h deleted +0 -8
@@ -1,8 +0,0 @@ -#ifndef _EVM_H -#define _EVM_H - -void enable_uart0_pin_mux (void ); -void enable_mmc1_pin_mux (void ); -void enable_enet_pin_mux (void ); - -#endif /* _EVM_H */
board/ti/ti814x/mux.c deleted +0 -86
86 lines not on this page · raw message
configs/ti814x_evm_defconfig deleted +0 -45
45 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 4/4 ti814x: Remove platform
Quoted 5 lines · Tom Rini
The TI814x (DM814x) platform is rather old and in need of a lot of migration work. As much of that work is well past the deadline, remove this platform.
Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/next, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200630/c73bec6e/attachment.sig>