ALSA: hda/realtek: Serialize setting GPIO LED
PATCH 1/1 ALSA: hda/realtek: Serialize setting GPIO LED
If a system has two GPIO controlled LED, one for mute and another one for micmute, and both of them are on before system suspend, sometimes one of them won't be turned off by system suspend.
The codec doesn't seem to be able to control multiple GPIO LEDs at the same time, so introduce a new mutex to serialize setting the LED, to prevent the issue from happening.
--- include/sound/hda_codec.h | 1 + sound/pci/hda/hda_codec.c | 1 + sound/pci/hda/patch_realtek.c | 3 +++ 3 files changed, 5 insertions(+)
include/sound/hda_codec.h +1 -0
@@ -206,6 +206,7 @@ struct hda_codec {struct mutex spdif_mutex;struct mutex control_mutex; +struct mutex led_mutex;struct snd_array spdif_out;unsigned int spdif_in_enable;/* SPDIF input enable? */ const hda_nid_t *slave_dig_outs;/* optional digital out slave widgets */
sound/pci/hda/hda_codec.c +1 -0
@@ -946,6 +946,7 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card, codec->addr = codec_addr;mutex_init (&codec->spdif_mutex);mutex_init (&codec->control_mutex); +mutex_init (&codec->led_mutex);snd_array_init (&codec->mixers,sizeof (struct hda_nid_item ),32 );snd_array_init (&codec->nids,sizeof (struct hda_nid_item ),32 );snd_array_init (&codec->init_pins,sizeof (struct hda_pincfg ),16 );
sound/pci/hda/patch_realtek.c +3 -0
@@ -4101,7 +4101,10 @@ static void alc_update_gpio_led(struct hda_codec *codec, unsigned int mask, {if (polarity) enabled = !enabled; + +mutex_lock (&codec->led_mutex);alc_update_gpio_data (codec, mask, !enabled);/* muted -> LED on */ +mutex_unlock (&codec->led_mutex); }/* turn on/off mute LED via GPIO per vmaster hook */
Signature · 1 line
2.17.1
Quoted 21 lines · Kai-Heng Feng
If a system has two GPIO controlled LED, one for mute and another one for micmute, and both of them are on before system suspend, sometimes one of them won't be turned off by system suspend.
The codec doesn't seem to be able to control multiple GPIO LEDs at the same time, so introduce a new mutex to serialize setting the LED, to prevent the issue from happening.
Signed-off-by Kai-Heng Feng <[email protected]>--- include/sound/hda_codec.h | 1 + sound/pci/hda/hda_codec.c | 1 + sound/pci/hda/patch_realtek.c | 3 +++ 3 files changed, 5 insertions(+)include/sound/hda_codec.h +0
-0
include/sound/hda_codec.h struct hda_codec { · line 209
Quoted 4 lines
include/sound/hda_codec.h +1
-0@@ -206,6 +206,7 @@ struct hda_codec {struct mutex spdif_mutex;struct mutex control_mutex; +struct mutex led_mutex;
Since it's only for Realtek codec, can it be better in alc_spec instead?
thanks,
Takashi
Quoted 28 lines · Takashi Iwai
Quoted 22 lines · Kai-Heng Feng
If a system has two GPIO controlled LED, one for mute and another one for micmute, and both of them are on before system suspend, sometimes one of them won't be turned off by system suspend.
The codec doesn't seem to be able to control multiple GPIO LEDs at the same time, so introduce a new mutex to serialize setting the LED, to prevent the issue from happening.
Signed-off-by Kai-Heng Feng <[email protected]>---
include/sound/hda_codec.h | 1 + sound/pci/hda/hda_codec.c | 1 + sound/pci/hda/patch_realtek.c | 3 +++ 3 files changed, 5 insertions(+)include/sound/hda_codec.h +0
-0@@ -206,6 +206,7 @@ struct hda_codec {
Quoted 6 lines
include/sound/hda_codec.h struct hda_codec { · line 209
Quoted 3 lines
include/sound/hda_codec.h +1
-0struct mutex spdif_mutex;struct mutex control_mutex; +struct mutex led_mutex;Since it's only for Realtek codec, can it be better in
alc_specinstead?
Ok, I found that the mutex just papers over the real issue.
The root cause is that led_set_brightness_nopm() use schedule_work() but the work queue doesn't gets flushed. I'll fix it there properly.
Kai-Heng
Quoted 5 lines
thanks,
Takashi