4.9.226-rc2 review
Greg Kroah-Hartman
maintainercover 4.9.226-rc2 review
This is the start of the stable review cycle for the 4.9.226 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 04 Jun 2020 10:16:52 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.226-rc2.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.226-rc2
Benjamin Block <[email protected]>
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
Salil Mehta <[email protected]>
net: hns: Fixes the missing put_device in positive leg for roce reset
Guoqing Jiang <[email protected]>
sc16is7xx: move label 'err_spi' to correct section
Liviu Dudau <[email protected]>
mm/vmalloc.c: don't dereference possible NULL pointer in __vunmap()
Roopa Prabhu <[email protected]>
net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags
Thomas Gleixner <[email protected]>
genirq/generic_pending: Do not lose pending affinity update
Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build
Qiushi Wu <[email protected]>
bonding: Fix reference count leak in bond_sysfs_slave_add.
Qiushi Wu <[email protected]>
qlcnic: fix missing release in qlcnic_83xx_interrupt_test.
Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code
Phil Sutter <[email protected]>
netfilter: ipset: Fix subcounter update skip
Michael Braun <[email protected]>
netfilter: nft_reject_bridge: enable reject with bridge vlan
Xin Long <[email protected]>
ip_vti: receive ipip packet by calling ip_tunnel_rcv
Jeremy Sowden <[email protected]>
vti4: eliminated some duplicate code.
Xin Long <[email protected]>
xfrm: fix a NULL-ptr deref in xfrm_local_error
Xin Long <[email protected]>
xfrm: fix a warning in xfrm_policy_insert_list
Xin Long <[email protected]>
xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input
Alexander Dahl <[email protected]>
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
Linus Lüssing <[email protected]>
mac80211: mesh: fix discovery timer re-arming issue / crash
Helge Deller <[email protected]>
parisc: Fix kernel panic in mem_init()
Qiushi Wu <[email protected]>
iommu: Fix reference count leak in iommu_group_alloc.
Arnd Bergmann <[email protected]>
include/asm-generic/topology.h: guard cpumask_of_node() macro argument
Alexander Potapenko <[email protected]>
fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()
Konstantin Khlebnikov <[email protected]>
mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()
Jerry Lee <[email protected]>
libceph: ignore pool overlay and cache logic on redirects
Eric W. Biederman <[email protected]>
exec: Always set cap_ambient in cap_bprm_set_creds
Chris Chiu <[email protected]>
ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC
Changming Liu <[email protected]>
ALSA: hwdep: fix a left shifting 1 by 31 UB bug
Robert Beckett <[email protected]>
ARM: dts/imx6q-bx50v3: Set display interface clock parents
Sebastian Reichel <[email protected]>
ARM: dts: imx6q-bx50v3: Add internal switch
Martyn Welch <[email protected]>
ARM: dts: imx: Correct B850v3 clock assignment
Kaike Wan <[email protected]>
IB/qib: Call kobject_put() when kobject_init_and_add() fails
Russell King <[email protected]>
ARM: uaccess: fix DACR mismatch with nested exceptions
Russell King <[email protected]>
ARM: uaccess: integrate uaccess_save and uaccess_restore
Russell King <[email protected]>
ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h
Stefan Agner <[email protected]>
ARM: 8843/1: use unified assembler in headers
Wei Yongjun <[email protected]>
Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()
Kevin Locke <[email protected]>
Input: i8042 - add ThinkPad S230u to i8042 reset list
Łukasz Patron <[email protected]>
Input: xpad - add custom init packet for Xbox One S controllers
Brendan Shanks <[email protected]>
Input: evdev - call input_flush_device() on release(), not flush()
James Hilliard <[email protected]>
Input: usbtouchscreen - add support for BonXeon TP
Steve French <[email protected]>
cifs: Fix null pointer check in cifs_read
Masahiro Yamada <[email protected]>
usb: gadget: legacy: fix redundant initialization warnings
Lei Xue <[email protected]>
cachefiles: Fix race between read_waiter and read_copier involving op->to_do
Bob Peterson <[email protected]>
gfs2: move privileged user check to gfs2_quota_lock_check
Chuhong Yuan <[email protected]>
net: microchip: encx24j600: add missed kthread_stop
Stephen Warren <[email protected]>
gpio: tegra: mask GPIO IRQs during IRQ shutdown
Kalderon, Michal <[email protected]>
IB/cma: Fix reference count leak when no ipv4 addresses are set
Dmitry V. Levin <[email protected]>
uapi: fix linux/if_pppol2tp.h userspace compilation errors
Qiushi Wu <[email protected]>
net/mlx4_core: fix a memory leak bug.
Qiushi Wu <[email protected]>
net: sun: fix missing release regions in cas_init_one().
Moshe Shemesh <[email protected]>
net/mlx5: Add command entry handling completion
Manivannan Sadhasivam <[email protected]>
net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()
Moshe Shemesh <[email protected]>
net/mlx5e: Update netdev txq on completions during closure
Jere Leppänen <[email protected]>
sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed
Roman Mashak <[email protected]>
net sched: fix reporting the first-time use timestamp
Yuqi Jin <[email protected]>
net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"
Vadim Fedorenko <[email protected]>
net: ipip: fix wrong address family in init error path
Eric Dumazet <[email protected]>
ax25: fix setsockopt(SO_BINDTODEVICE)
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/dts/imx6q-b450v3.dts | 7 -- arch/arm/boot/dts/imx6q-b650v3.dts | 7 -- arch/arm/boot/dts/imx6q-b850v3.dts | 11 -- arch/arm/boot/dts/imx6q-bx50v3.dtsi | 77 ++++++++++++++ arch/arm/include/asm/assembler.h | 83 +-------------- arch/arm/include/asm/uaccess-asm.h | 117 +++++++++++++++++++++ arch/arm/include/asm/vfpmacros.h | 8 +- arch/arm/kernel/entry-armv.S | 11 +- arch/arm/kernel/entry-header.S | 9 +- arch/arm/lib/bitops.h | 8 +- arch/parisc/mm/init.c | 2 +- arch/x86/include/asm/dma.h | 2 +- drivers/gpio/gpio-tegra.c | 1 + drivers/infiniband/hw/qib/qib_sysfs.c | 9 +- drivers/input/evdev.c | 19 +--- drivers/input/joystick/xpad.c | 12 +++ drivers/input/rmi4/rmi_driver.c | 3 +- drivers/input/serio/i8042-x86ia64io.h | 7 ++ drivers/input/touchscreen/usbtouchscreen.c | 1 + drivers/iommu/iommu.c | 2 +- drivers/net/bonding/bond_sysfs_slave.c | 4 +- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 3 + drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 15 +++ drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 6 +- drivers/net/ethernet/microchip/encx24j600.c | 5 +- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +- drivers/net/ethernet/sun/cassini.c | 3 +- drivers/s390/scsi/zfcp_fsf.c | 10 +- drivers/tty/serial/sc16is7xx.c | 2 + drivers/usb/gadget/legacy/inode.c | 3 +- fs/binfmt_elf.c | 2 +- fs/cachefiles/rdwr.c | 2 +- fs/cifs/file.c | 2 +- fs/gfs2/quota.c | 3 +- fs/gfs2/quota.h | 3 +- include/asm-generic/topology.h | 2 +- include/linux/mlx5/driver.h | 1 + include/linux/mm.h | 15 ++- include/linux/netfilter/nf_conntrack_pptp.h | 2 +- include/net/act_api.h | 3 +- include/rdma/ib_addr.h | 6 +- include/uapi/linux/l2tp.h | 7 +- kernel/irq/migration.c | 26 +++-- mm/vmalloc.c | 2 +- net/ax25/af_ax25.c | 6 +- net/bridge/netfilter/nft_reject_bridge.c | 6 ++ net/ceph/osd_client.c | 4 +- net/core/rtnetlink.c | 2 +- net/ipv4/ip_vti.c | 75 +++++++------ net/ipv4/ipip.c | 2 +- net/ipv4/netfilter/nf_nat_pptp.c | 7 +- net/ipv4/route.c | 14 ++- net/mac80211/mesh_hwmp.c | 7 ++ net/netfilter/ipset/ip_set_list_set.c | 2 +- net/netfilter/nf_conntrack_pptp.c | 62 ++++++----- net/qrtr/qrtr.c | 2 +- net/sctp/sm_statefuns.c | 9 +- net/xfrm/xfrm_input.c | 2 +- net/xfrm/xfrm_output.c | 3 +- net/xfrm/xfrm_policy.c | 7 +- security/commoncap.c | 1 + sound/core/hwdep.c | 4 +- sound/usb/mixer.c | 8 ++ 65 files changed, 473 insertions(+), 283 deletions(-)
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.226 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 04 Jun 2020 10:16:52 +0000. Anything received after that time might be too late.
Many arm builds still fail as attached. Is it really only me seeing this problem ?
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
$ git log --oneline v4.9..c001899a5d6 arch/arm | grep unified c001899a5d6c ARM: 8843/1: use unified assembler in headers a216376add73 ARM: 8841/1: use unified assembler in macros eb7ff9023e4f ARM: 8829/1: spinlock: use unified assembler language syntax 32fdb046ac43 ARM: 8828/1: uaccess: use unified assembler language syntax 1293c2b5d790 ARM: dts: berlin2q: add "cache-unified" to l2 node 75fea300d73a ARM: 8723/2: always assume the "unified" syntax for assembly code
I am quite concerned especially about missing commit 75fea300d73a, which removes the ARM_ASM_UNIFIED configuration option. That means it is still present in v4.9.y, but the failing builds don't enable it. Given that, the build failures don't seem to be surprising.
Guenter
---
Build reference: v4.9.225-60-g6915714f12d0
gcc version: arm-linux-gnueabi-gcc (GCC) 9.3.0
Building arm:allmodconfig ... failed
--------------
Error log:arch/arm/vfp/vfphw.S: Assembler messages:arch/arm/vfp/vfphw.S:158: Error: bad instruction ldclne p11,cr0,[r10],#32*4' arch/arm/vfp/vfphw.S:233: Error: bad instruction stclne p11,cr0,[r0],#32*4' make[2]: *** [arch/arm/vfp/vfphw.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/vfp] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
--------------
Building arm:s3c2410_defconfig ... failed
--------------
Error log:arch/arm/lib/changebit.S: Assembler messages:arch/arm/lib/changebit.S:15: Error: bad instruction `strbne r1,[ip]' make[2]: *** [arch/arm/lib/changebit.o] Error 1
make[2]: *** Waiting for unfinished jobs.... arch/arm/lib/clear_user.S: Assembler messages:arch/arm/lib/clear_user.S:33: Error: bad instruction strbtal r2,[r0],#1' arch/arm/lib/clear_user.S:34: Error: bad instruction strbtle r2,[r0],#1' arch/arm/lib/clear_user.S:35: Error: bad instruction strbtlt r2,[r0],#1' arch/arm/lib/clear_user.S:39: Error: bad instruction strtpl r2,[r0],#4' arch/arm/lib/clear_user.S:39: Error: bad instruction strtpl r2,[r0],#4' arch/arm/lib/clear_user.S:42: Error: bad instruction strtpl r2,[r0],#4' arch/arm/lib/clear_user.S:44: Error: bad instruction strbtne r2,[r0],#1' arch/arm/lib/clear_user.S:44: Error: bad instruction strbtne r2,[r0],#1' make[2]: *** [arch/arm/lib/clear_user.o] Error 1
make[1]: *** [arch/arm/lib] Error 2
make[1]: *** Waiting for unfinished jobs....
Failed builds:
arm:allmodconfig
arm:s3c2410_defconfig
arm:omap2plus_defconfig
arm:imx_v6_v7_defconfig
arm:ixp4xx_defconfig
arm:u8500_defconfig
arm:multi_v5_defconfig
arm:omap1_defconfig
arm:footbridge_defconfig
arm:davinci_all_defconfig
arm:mini2440_defconfig
arm:axm55xx_defconfig
arm:mxs_defconfig
arm:keystone_defconfig
arm:vexpress_defconfig
arm:imx_v4_v5_defconfig
arm:at91_dt_defconfig
arm:s3c6400_defconfig
arm:lpc32xx_defconfig
arm:shmobile_defconfig
arm:nhk8815_defconfig
arm:bcm2835_defconfig
arm:sama5_defconfig
arm:orion5x_defconfig
arm:exynos_defconfig
arm:cm_x2xx_defconfig
arm:s5pv210_defconfig
arm:integrator_defconfig
arm:pxa910_defconfig
arm:clps711x_defconfig
Quoted 11 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.226 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 04 Jun 2020 10:16:52 +0000. Anything received after that time might be too late.
Many arm builds still fail as attached. Is it really only me seeing this problem ?
No I am seeing this as well. Been having some email problems today ...
Quoted 5 lines
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
$ git log --oneline v4.9..c001899a5d6 arch/arm | grep unified c001899a5d6c ARM: 8843/1: use unified assembler in headers
Bisect points to this one for me.
Cheers
Jon
Signature · 1 line
nvpublic
+ Russell King
Quoted 7 lines · Guenter Roeck
Quoted 5 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.226 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 6 lines
Quoted 3 lines
Responses should be made by Thu, 04 Jun 2020 10:16:52 +0000. Anything received after that time might be too late.
Many arm builds still fail as attached. Is it really only me seeing this problem ?
We have noticed this problem.
Quoted 2 lines
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
This is reported on stable mailing list
https://lore.kernel.org/stable/[email protected]/T/#t
Quoted 84 lines
$ git log --oneline v4.9..c001899a5d6 arch/arm | grep unified c001899a5d6c ARM: 8843/1: use unified assembler in headers a216376add73 ARM: 8841/1: use unified assembler in macros eb7ff9023e4f ARM: 8829/1: spinlock: use unified assembler language syntax 32fdb046ac43 ARM: 8828/1: uaccess: use unified assembler language syntax 1293c2b5d790 ARM: dts: berlin2q: add "cache-unified" to l2 node 75fea300d73a ARM: 8723/2: always assume the "unified" syntax for assembly codeI am quite concerned especially about missing commit
75fea300d73a, which removes theARM_ASM_UNIFIEDconfiguration option. That means it is still present in v4.9.y, but the failing builds don't enable it. Given that, the build failures don't seem to be surprising.Guenter
---
Build reference: v4.9.225-60-g6915714f12d0
gcc version: arm-linux-gnueabi-gcc (GCC) 9.3.0Building arm:allmodconfig ... failed
--------------
Error log:arch/arm/vfp/vfphw.S: Assembler messages:arch/arm/vfp/vfphw.S:158: Error: bad instructionldclne p11,cr0,[r10],#32*4' arch/arm/vfp/vfphw.S:233: Error: bad instructionstclne p11,cr0,[r0],#32*4' make[2]: *** [arch/arm/vfp/vfphw.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/vfp] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
--------------Building arm:s3c2410_defconfig ... failed
--------------
Error log:arch/arm/lib/changebit.S: Assembler messages:arch/arm/lib/changebit.S:15: Error: bad instruction `strbne r1,[ip]' make[2]: *** [arch/arm/lib/changebit.o] Error 1
make[2]: *** Waiting for unfinished jobs....arch/arm/lib/clear_user.S: Assembler messages:arch/arm/lib/clear_user.S:33: Error: bad instructionstrbtal r2,[r0],#1' arch/arm/lib/clear_user.S:34: Error: bad instructionstrbtle r2,[r0],#1'arch/arm/lib/clear_user.S:35: Error: bad instructionstrbtlt r2,[r0],#1' arch/arm/lib/clear_user.S:39: Error: bad instructionstrtpl r2,[r0],#4'arch/arm/lib/clear_user.S:39: Error: bad instructionstrtpl r2,[r0],#4' arch/arm/lib/clear_user.S:42: Error: bad instructionstrtpl r2,[r0],#4'arch/arm/lib/clear_user.S:44: Error: bad instructionstrbtne r2,[r0],#1' arch/arm/lib/clear_user.S:44: Error: bad instructionstrbtne r2,[r0],#1' make[2]: *** [arch/arm/lib/clear_user.o] Error 1
make[1]: *** [arch/arm/lib] Error 2
make[1]: *** Waiting for unfinished jobs....Failed builds:
arm:allmodconfig
arm:s3c2410_defconfig
arm:omap2plus_defconfig
arm:imx_v6_v7_defconfig
arm:ixp4xx_defconfig
arm:u8500_defconfig
arm:multi_v5_defconfig
arm:omap1_defconfig
arm:footbridge_defconfig
arm:davinci_all_defconfig
arm:mini2440_defconfig
arm:axm55xx_defconfig
arm:mxs_defconfig
arm:keystone_defconfig
arm:vexpress_defconfig
arm:imx_v4_v5_defconfig
arm:at91_dt_defconfig
arm:s3c6400_defconfig
arm:lpc32xx_defconfig
arm:shmobile_defconfig
arm:nhk8815_defconfig
arm:bcm2835_defconfig
arm:sama5_defconfig
arm:orion5x_defconfig
arm:exynos_defconfig
arm:cm_x2xx_defconfig
arm:s5pv210_defconfig
arm:integrator_defconfig
arm:pxa910_defconfig
arm:clps711x_defconfig
Sasha Levin
maintainerQuoted 6 lines · Guenter Roeck
Quoted 5 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.226 release. There are 59 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 8 lines
Quoted 3 lines
Responses should be made by Thu, 04 Jun 2020 10:16:52 +0000. Anything received after that time might be too late.
Many arm builds still fail as attached. Is it really only me seeing this problem ?
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
We don't - I took 71f8af111010 as a dependency rather than on its own merit.
Quoted 8 lines
$ git log --oneline v4.9..c001899a5d6 arch/arm | grep unified c001899a5d6c ARM: 8843/1: use unified assembler in headers a216376add73 ARM: 8841/1: use unified assembler in macros eb7ff9023e4f ARM: 8829/1: spinlock: use unified assembler language syntax 32fdb046ac43 ARM: 8828/1: uaccess: use unified assembler language syntax 1293c2b5d790 ARM: dts: berlin2q: add "cache-unified" to l2 node 75fea300d73a ARM: 8723/2: always assume the "unified" syntax for assembly code
Quoted 4 lines
I am quite concerned especially about missing commit
75fea300d73a, which removes theARM_ASM_UNIFIEDconfiguration option. That means it is still present in v4.9.y, but the failing builds don't enable it. Given that, the build failures don't seem to be surprising.
I'm just going to drop this series from 4.9 for now, until we can figure out how to do it right.
Signature · 2 lines
Thanks, Sasha
Hi!
Quoted 5 lines
Quoted 2 lines
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
We don't - I took
71f8af111010as a dependency rather than on its own merit.
Would it be possible to somehow mark patches that are "dependency" rather than "on their own"? It would make review easier...
Thanks,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Greg Kroah-Hartman
maintainerQuoted 10 lines · Pavel Machek
Hi!
Quoted 5 lines
Quoted 2 lines
FWIW, if we need/want to use unified assembler in v4.9.y, shouldn't all unified assembler patches be applied ?
We don't - I took
71f8af111010as a dependency rather than on its own merit.Would it be possible to somehow mark patches that are "dependency" rather than "on their own"? It would make review easier...
That's a lot of extra work on our part, and would make the changelog text change, which isn't always liked, sorry.
greg k-h