Skip to contentSkip to conversation

xen/displif: Protocol version 2

PATCH In review Oleksandr Andrushchenko 3 participants 8 messages Jul 1, 2020 – Jul 27, 2020

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 xen/displif: Protocol version 2

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

---
 xen/include/public/io/displif.h | 91 +++++++++++++++++++++++++++++++--
 1 file changed, 88 insertions(+), 3 deletions(-)
xen/include/public/io/displif.h +88 -3
index cc5de9cb1f35..0055895510f7 100644
@@ -38,7 +38,8 @@
  *                           Protocol version
  ******************************************************************************
  */
-#define XENDISPL_PROTOCOL_VERSION     "1"
+#define XENDISPL_PROTOCOL_VERSION     "2"
+#define XENDISPL_PROTOCOL_VERSION_INT  2
 
 /*
  ******************************************************************************
@@ -202,6 +203,9 @@
  *      Width and height of the connector in pixels separated by
  *      XENDISPL_RESOLUTION_SEPARATOR. This defines visible area of the
  *      display.
+ *      If backend provides extended display identification data (EDID) with
+ *      XENDISPL_OP_GET_EDID request then EDID values must take precedence
+ *      over the resolutions defined here.
  *
  *------------------ Connector Request Transport Parameters -------------------
  *
@@ -349,6 +353,8 @@
 #define XENDISPL_OP_FB_DETACH         0x13
 #define XENDISPL_OP_SET_CONFIG        0x14
 #define XENDISPL_OP_PG_FLIP           0x15
+/* The below command is available in protocol version 2 and above. */
+#define XENDISPL_OP_GET_EDID          0x16
 
 /*
  ******************************************************************************
@@ -377,6 +383,10 @@
 #define XENDISPL_FIELD_BE_ALLOC       "be-alloc"
 #define XENDISPL_FIELD_UNIQUE_ID      "unique-id"
 
+#define XENDISPL_EDID_BLOCK_SIZE      128
+#define XENDISPL_EDID_BLOCK_COUNT     256
+#define XENDISPL_EDID_MAX_SIZE        (XENDISPL_EDID_BLOCK_SIZE * XENDISPL_EDID_BLOCK_COUNT)
+
 /*
  ******************************************************************************
  *                          STATUS RETURN CODES
@@ -451,7 +461,9 @@
  * +----------------+----------------+----------------+----------------+
  * |                           gref_directory                          | 40
  * +----------------+----------------+----------------+----------------+
- * |                             reserved                              | 44
+ * |                             data_ofs                              | 44
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 48
  * +----------------+----------------+----------------+----------------+
  * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
  * +----------------+----------------+----------------+----------------+
@@ -494,6 +506,7 @@
  *   buffer size (buffer_sz) exceeds what can be addressed by this single page,
  *   then reference to the next page must be supplied (see gref_dir_next_page
  *   below)
+ * data_ofs - uint32_t, offset of the data in the buffer, octets
  */
 
 #define XENDISPL_DBUF_FLG_REQ_ALLOC       (1 << 0)
@@ -506,6 +519,7 @@ struct xendispl_dbuf_create_req {
     uint32_t buffer_sz;
     uint32_t flags;
     grant_ref_t gref_directory;
+    uint32_t data_ofs;
 };
 
 /*
@@ -731,6 +745,44 @@ struct xendispl_page_flip_req {
     uint64_t fb_cookie;
 };
 
+/*
+ * Request EDID - request EDID describing current connector:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_GET_EDID   |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                          gref_directory                           | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This command is not available in protocol version 1 and should be
+ *     ignored.
+ *   - This request is optional and if not supported then visible area
+ *     is defined by the relevant XenStore's "resolution" property.
+ *   - Shared buffer, allocated for EDID storage, must not be less then
+ *     XENDISPL_EDID_MAX_SIZE octets.
+ *
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * gref_directory - grant_ref_t, a reference to the first shared page
+ *   describing EDID buffer references. See XENDISPL_OP_DBUF_CREATE for
+ *   grant page directory structure (struct xendispl_page_directory).
+ *
+ * See response format for this request.
+ */
+
+struct xendispl_get_edid_req {
+    uint32_t buffer_sz;
+    grant_ref_t gref_directory;
+};
+
 /*
  *---------------------------------- Responses --------------------------------
  *
@@ -753,6 +805,35 @@ struct xendispl_page_flip_req {
  * id - uint16_t, private guest value, echoed from request
  * status - int32_t, response status, zero on success and -XEN_EXX on failure
  *
+ *
+ * Get EDID response - response for XENDISPL_OP_GET_EDID:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             edid_sz                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This response is not available in protocol version 1 and should be
+ *     ignored.
+ *
+ * edid_sz - uint32_t, size of the EDID, octets
+ */
+
+struct xendispl_get_edid_resp {
+    uint32_t edid_sz;
+};
+
+/*
  *----------------------------------- Events ----------------------------------
  *
  * Events are sent via a shared page allocated by the front and propagated by
@@ -804,6 +885,7 @@ struct xendispl_req {
         struct xendispl_fb_detach_req fb_detach;
         struct xendispl_set_config_req set_config;
         struct xendispl_page_flip_req pg_flip;
+        struct xendispl_get_edid_req get_edid;
         uint8_t reserved[56];
     } op;
 };
@@ -813,7 +895,10 @@ struct xendispl_resp {
     uint8_t operation;
     uint8_t reserved;
     int32_t status;
-    uint8_t reserved1[56];
+    union {
+        struct xendispl_get_edid_resp get_edid;
+        uint8_t reserved1[56];
+    } op;
 };
 
 struct xendispl_evt {
Signature · 1 line
2.17.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 26 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

Quoted 7 lines

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

Juergen

#2 lore raw
Quoted 31 lines · Jürgen Groß
Quoted 30 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

Quoted 5 lines
Quoted 3 lines

4. Bump protocol version to 2.

Thank you, do you want me to prepare the same for the kernel so

you have it at hand when the time comes?

Quoted 3 lines

Juergen

#3 lore raw
Quoted 34 lines · Oleksandr Andrushchenko
Quoted 33 lines · Jürgen Groß
Quoted 32 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Thank you, do you want me to prepare the same for the kernel so

you have it at hand when the time comes?

It should be added to the kernel only when really needed (i.e. a user of the new functionality is showing up).

Juergen

#4 lore raw
Quoted 37 lines · Jürgen Groß
Quoted 36 lines · Oleksandr Andrushchenko
Quoted 35 lines · Jürgen Groß
Quoted 33 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

Thank you, do you want me to prepare the same for the kernel so

you have it at hand when the time comes?

It should be added to the kernel only when really needed (i.e. a user of the new functionality is showing up).

We have a patch for that which adds EDID to the existing PV DRM frontend,

so while upstreaming those changes I will also include changes to the protocol

in the kernel series: for that we need the header in Xen tree first, right?

Quoted 3 lines

Juergen

Thank you,

Oleksandr

#5 lore raw
Quoted 45 lines · Oleksandr Andrushchenko
Quoted 43 lines · Jürgen Groß
Quoted 41 lines · Oleksandr Andrushchenko
Quoted 31 lines · Jürgen Groß
Quoted 30 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

Quoted 5 lines
Quoted 3 lines

4. Bump protocol version to 2.

Thank you, do you want me to prepare the same for the kernel so

you have it at hand when the time comes?

Quoted 8 lines
Quoted 2 lines

It should be added to the kernel only when really needed (i.e. a user of the new functionality is showing up).

We have a patch for that which adds EDID to the existing PV DRM frontend,

so while upstreaming those changes I will also include changes to the protocol

in the kernel series: for that we need the header in Xen tree first, right?

Yes.

Juergen

#6 lore raw

Hi, Paul!

Quoted 49 lines · Jürgen Groß
Quoted 48 lines · Oleksandr Andrushchenko
Quoted 45 lines · Jürgen Groß
Quoted 34 lines · Oleksandr Andrushchenko
Quoted 33 lines · Jürgen Groß
Quoted 32 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Thank you, do you want me to prepare the same for the kernel so

you have it at hand when the time comes?

It should be added to the kernel only when really needed (i.e. a user of the new functionality is showing up).

Quoted 8 lines
Quoted 5 lines

We have a patch for that which adds EDID to the existing PV DRM frontend,

so while upstreaming those changes I will also include changes to the protocol

in the kernel series: for that we need the header in Xen tree first, right?

Yes.

Is it possible that we have this change in the release please?

This is not used by any piece of code in Xen, so it won't hurt anything.

But I need this change in so I can proceed with the Linux kernel part:

we would like to upstream the relevant EDID change to the display

frontend driver and without the header in Xen tree we are stuck

Thank you in advance,

Oleksandr

Quoted 2 lines

Juergen

#7 lore raw
In reply to Oleksandr Andrushchenko

Ping

Quoted 209 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

1. Add protocol version as an integer

Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer.

2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE

There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer.

3. Add XENDISPL_OP_GET_EDID command

Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays.

If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property.

If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore.

4. Bump protocol version to 2.

---
  xen/include/public/io/displif.h | 91 +++++++++++++++++++++++++++++++--
  1 file changed, 88 insertions(+), 3 deletions(-)
xen/include/public/io/displif.h +88 -3
index cc5de9cb1f35..0055895510f7 100644
@@ -38,7 +38,8 @@
   *                           Protocol version
   ******************************************************************************
   */
-#define XENDISPL_PROTOCOL_VERSION     "1"
+#define XENDISPL_PROTOCOL_VERSION     "2"
+#define XENDISPL_PROTOCOL_VERSION_INT  2
 
  /*
   ******************************************************************************
@@ -202,6 +203,9 @@
   *      Width and height of the connector in pixels separated by
   *      XENDISPL_RESOLUTION_SEPARATOR. This defines visible area of the
   *      display.
+ *      If backend provides extended display identification data (EDID) with
+ *      XENDISPL_OP_GET_EDID request then EDID values must take precedence
+ *      over the resolutions defined here.
   *
   *------------------ Connector Request Transport Parameters -------------------
   *
@@ -349,6 +353,8 @@
  #define XENDISPL_OP_FB_DETACH         0x13
  #define XENDISPL_OP_SET_CONFIG        0x14
  #define XENDISPL_OP_PG_FLIP           0x15
+/* The below command is available in protocol version 2 and above. */
+#define XENDISPL_OP_GET_EDID          0x16
 
  /*
   ******************************************************************************
@@ -377,6 +383,10 @@
  #define XENDISPL_FIELD_BE_ALLOC       "be-alloc"
  #define XENDISPL_FIELD_UNIQUE_ID      "unique-id"
 
+#define XENDISPL_EDID_BLOCK_SIZE      128
+#define XENDISPL_EDID_BLOCK_COUNT     256
+#define XENDISPL_EDID_MAX_SIZE        (XENDISPL_EDID_BLOCK_SIZE * XENDISPL_EDID_BLOCK_COUNT)
+
  /*
   ******************************************************************************
   *                          STATUS RETURN CODES
@@ -451,7 +461,9 @@
   * +----------------+----------------+----------------+----------------+
   * |                           gref_directory                          | 40
   * +----------------+----------------+----------------+----------------+
- * |                             reserved                              | 44
+ * |                             data_ofs                              | 44
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 48
   * +----------------+----------------+----------------+----------------+
   * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
   * +----------------+----------------+----------------+----------------+
@@ -494,6 +506,7 @@
   *   buffer size (buffer_sz) exceeds what can be addressed by this single page,
   *   then reference to the next page must be supplied (see gref_dir_next_page
   *   below)
+ * data_ofs - uint32_t, offset of the data in the buffer, octets
   */
 
  #define XENDISPL_DBUF_FLG_REQ_ALLOC       (1 << 0)
@@ -506,6 +519,7 @@ struct xendispl_dbuf_create_req {
      uint32_t buffer_sz;
      uint32_t flags;
      grant_ref_t gref_directory;
+    uint32_t data_ofs;
  };
 
  /*
@@ -731,6 +745,44 @@ struct xendispl_page_flip_req {
      uint64_t fb_cookie;
  };
 
+/*
+ * Request EDID - request EDID describing current connector:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_GET_EDID   |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                          gref_directory                           | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This command is not available in protocol version 1 and should be
+ *     ignored.
+ *   - This request is optional and if not supported then visible area
+ *     is defined by the relevant XenStore's "resolution" property.
+ *   - Shared buffer, allocated for EDID storage, must not be less then
+ *     XENDISPL_EDID_MAX_SIZE octets.
+ *
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * gref_directory - grant_ref_t, a reference to the first shared page
+ *   describing EDID buffer references. See XENDISPL_OP_DBUF_CREATE for
+ *   grant page directory structure (struct xendispl_page_directory).
+ *
+ * See response format for this request.
+ */
+
+struct xendispl_get_edid_req {
+    uint32_t buffer_sz;
+    grant_ref_t gref_directory;
+};
+
  /*
   *---------------------------------- Responses --------------------------------
   *
@@ -753,6 +805,35 @@ struct xendispl_page_flip_req {
   * id - uint16_t, private guest value, echoed from request
   * status - int32_t, response status, zero on success and -XEN_EXX on failure
   *
+ *
+ * Get EDID response - response for XENDISPL_OP_GET_EDID:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             edid_sz                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This response is not available in protocol version 1 and should be
+ *     ignored.
+ *
+ * edid_sz - uint32_t, size of the EDID, octets
+ */
+
+struct xendispl_get_edid_resp {
+    uint32_t edid_sz;
+};
+
+/*
   *----------------------------------- Events ----------------------------------
   *
   * Events are sent via a shared page allocated by the front and propagated by
@@ -804,6 +885,7 @@ struct xendispl_req {
          struct xendispl_fb_detach_req fb_detach;
          struct xendispl_set_config_req set_config;
          struct xendispl_page_flip_req pg_flip;
+        struct xendispl_get_edid_req get_edid;
          uint8_t reserved[56];
      } op;
  };
@@ -813,7 +895,10 @@ struct xendispl_resp {
      uint8_t operation;
      uint8_t reserved;
      int32_t status;
-    uint8_t reserved1[56];
+    union {
+        struct xendispl_get_edid_resp get_edid;
+        uint8_t reserved1[56];
+    } op;
  };
 
  struct xendispl_evt {