net: dsa: microchip: enable ksz9893 via i2c in the ksz9477 driver
PATCH 1/1 net: dsa: microchip: enable ksz9893 via i2c in the ksz9477 driver
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C.
--- drivers/net/dsa/microchip/ksz9477_i2c.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/dsa/microchip/ksz9477_i2c.c +1 -0
@@ -79,6 +79,7 @@ MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id);static const struct of_device_id ksz9477_dt_ids[] = { { .compatible ="microchip,ksz9477" }, { .compatible ="microchip,ksz9897" }, + { .compatible ="microchip,ksz9893" }, { .compatible ="microchip,ksz9567" }, {}, };
Signature · 1 line
2.20.1
Quoted 5 lines · Helmut Grohne
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C.
Signed-off-by Helmut Grohne <[email protected]>
Andrew
Quoted 5 lines · Helmut Grohne
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C.
Signed-off-by Helmut Grohne <[email protected]>
Signature · 1 line
Florian
From: Helmut Grohne <[email protected]>
Date: Wed, 1 Jul 2020 13:22:20 +0200
Quoted 5 lines
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C.
Signed-off-by Helmut Grohne <[email protected]>
Applied, thank you.