bpf: lsm: Disable or enable BPF LSM at boot time
Subsystems (4)
PATCH 1/1 bpf: lsm: Disable or enable BPF LSM at boot time
This option adds a kernel parameter 'bpf_lsm', which allows the BPF LSM to be disabled at boot. The purpose of this option is to allow a single kernel image to be distributed with the BPF LSM built in, but not necessarily enabled.
--- Documentation/admin-guide/kernel-parameters.txt | 8 ++++++++ init/Kconfig | 12 ++++++++++++ security/bpf/hooks.c | 16 ++++++++++++++++ 3 files changed, 36 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +8 -0
@@ -4575,6 +4575,14 @@ 1 -- enable. Default value is set via kernel config option. + bpf_lsm= [BPF_LSM] Disable or enable LSM Instrumentation + with BPF at boot time. + Format: { "0" | "1" } + See init/Kconfig help text. + 0 -- disable. + 1 -- enable. + Default value is 1. + serialnumber [BUGS=X86-32] shapers= [NET]
init/Kconfig +12 -0
@@ -1659,6 +1659,18 @@ config BPF_LSM If you are unsure how to answer this question, answer N. +config BPF_LSM_BOOTPARAM + bool "LSM Instrumentation with BPF boot parameter" + depends on BPF_LSM + help + This option adds a kernel parameter 'bpf_lsm', which allows LSM + instrumentation with BPF to be disabled at boot. + If this option is selected, the BPF LSM + functionality can be disabled with bpf_lsm=0 on the kernel + command line. The purpose of this option is to allow a single + kernel image to be distributed with the BPF LSM built in, but not + necessarily enabled. + config BPF_SYSCALL bool "Enable bpf() system call" select BPF
security/bpf/hooks.c +16 -0
@@ -3,9 +3,24 @@/* * Copyright (C) 2020 Google LLC. */ + +#include <linux/init.h> #include <linux/lsm_hooks.h> #include <linux/bpf_lsm.h> +int bpf_lsm_enabled_boot__initdata =1 ; +#ifdef CONFIG_BPF_LSM_BOOTPARAM +static int __init bpf_lsm_enabled_setup (char *str) +{ +unsigned long enabled; + +if (!kstrtoul (str,0 , &enabled)) + bpf_lsm_enabled_boot = enabled ?1 :0 ; +return 1 ; +} +__setup ("bpf_lsm=" , bpf_lsm_enabled_setup); +#endif + static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = { #define LSM_HOOK(RET, DEFAULT, NAME, ...) \ LSM_HOOK_INIT(NAME, bpf_lsm_##NAME),
@@ -23,4 +38,5 @@ static int __init bpf_lsm_init(void)DEFINE_LSM (bpf) = { .name ="bpf" , .init = bpf_lsm_init, + .enabled = &bpf_lsm_enabled_boot, };
Signature · 1 line
2.27.0
Daniel Borkmann
maintainerQuoted 7 lines · Lorenzo Fontana
This option adds a kernel parameter '
bpf_lsm', which allows the BPF LSM to be disabled at boot. The purpose of this option is to allow a single kernel image to be distributed with the BPF LSM built in, but not necessarily enabled.Signed-off-by Lorenzo Fontana <[email protected]>
Well, this explains what the patch is doing but not *why* you need it exactly. Please explain your concrete use-case for this patch.
Thanks,
Daniel
Quoted 8 lines · Daniel Borkmann
Quoted 6 lines · Lorenzo Fontana
This option adds a kernel parameter '
bpf_lsm', which allows the BPF LSM to be disabled at boot. The purpose of this option is to allow a single kernel image to be distributed with the BPF LSM built in, but not necessarily enabled.
Quoted 4 lines
Quoted 1 line
Signed-off-by Lorenzo Fontana <[email protected]>Well, this explains what the patch is doing but not *why* you need it exactly. Please explain your concrete use-case for this patch.
Also, this patch is not really needed as it can already be done with the current kernel parameters.
LSMs can be enabled on the command line
with the lsm= parameter. So you can just pass lsm="selinux,capabilities" etc and not pass "bpf" and it will disable the BPF_LSM.
- KP
Quoted 3 lines
Thanks,
Daniel
Quoted 14 lines · KP Singh
Quoted 8 lines · Daniel Borkmann
Quoted 6 lines · Lorenzo Fontana
This option adds a kernel parameter '
bpf_lsm', which allows the BPF LSM to be disabled at boot. The purpose of this option is to allow a single kernel image to be distributed with the BPF LSM built in, but not necessarily enabled.Quoted 4 lines
Quoted 1 line
Signed-off-by Lorenzo Fontana <[email protected]>Well, this explains what the patch is doing but not *why* you need it exactly. Please explain your concrete use-case for this patch.
Quoted 12 lines
Also, this patch is not really needed as it can already be done with the current kernel parameters.
LSMs can be enabled on the command line
with the lsm= parameter. So you can just pass lsm="selinux,capabilities" etc and not pass "bpf" and it will disable theBPF_LSM.- KP
Quoted 3 lines
Thanks,
Daniel
Hi,
Thanks Daniel and KP for looking into this, I really appreciate it!
The *why* I need it is because I need to ship the kernel with BPF LSM disabled at boot time.
The use case is exactly the same as the one described by KP, however for a personal preference I prefer to pass specifically bpf_lsm=1 or bpf_lsm=0 - It's easier to change programmatically in my scripts with a simple sprintf("bpf_lsm=%d", value). I do the same with "selinux=1" and "selinux=0" in my systems.
From what I can see by reading the code and testing, the two ways bot act on 'lsm_info.enabled' defined in 'lsm_hooks.h'. So it's not just a personal preference, I just want the same set of options available to me as I do with selinux.
Thanks a lot,
Lore
Quoted 35 lines · Lorenzo Fontana
Quoted 14 lines · KP Singh
Quoted 8 lines · Daniel Borkmann
Quoted 6 lines · Lorenzo Fontana
This option adds a kernel parameter '
bpf_lsm', which allows the BPF LSM to be disabled at boot. The purpose of this option is to allow a single kernel image to be distributed with the BPF LSM built in, but not necessarily enabled.Quoted 4 lines
Quoted 1 line
Signed-off-by Lorenzo Fontana <[email protected]>Well, this explains what the patch is doing but not *why* you need it exactly. Please explain your concrete use-case for this patch.
Quoted 12 lines
Also, this patch is not really needed as it can already be done with the current kernel parameters.
LSMs can be enabled on the command line
with the lsm= parameter. So you can just pass lsm="selinux,capabilities" etc and not pass "bpf" and it will disable theBPF_LSM.- KP
Quoted 3 lines
Thanks,
DanielHi,
Thanks Daniel and KP for looking into this, I really appreciate it!The *why* I need it is because I need to ship the kernel with BPF LSM disabled at boot time.
Quoted 9 lines
The use case is exactly the same as the one described by KP, however for a personal preference I prefer to pass specifically bpf_lsm=1 or bpf_lsm=0 - It's easier to change programmatically in my scripts with a simple
sprintf("bpf_lsm=%d", value). I do the same with "selinux=1" and "selinux=0" in my systems.
From what I can see by reading the code and testing, the two ways bot act on 'lsm_info.enabled' defined in 'lsm_hooks.h'. So it's not just a personal preference, I just want the same set of options available to me as I do with selinux.
The "selinux=" option existed before the "lsm=" parameter was added and it now exists only for backward compatibility. I added Paul and Stephen to Cc who might have more information about this.
- KP
Quoted 3 lines
Thanks a lot,
Lore