Sync UDMA bindings from kernel
Vignesh Raghavendra
maintainerv3 cover Sync UDMA bindings from kernel
UDMA DT bindings have deviated from kernel's DT for AM654 and J721e. This series updates UDMA driver and sync DT bindings
Tested OSPI and CPSW on AM654 and J721e after the changes
v3:
Drop unused PSIL entries in 1/3 and compile files that are required for given SoC to reduce memory footprint.
v2:
Collect R-by
Update patch 2/3 to note about DT incompatibility
Vignesh Raghavendra (3):
dma: ti: Add static PSIL endpoint information
dma: ti: k3-udma: Update driver to use static endpoint Data
arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT
arch/arm/dts/k3-am65-mcu.dtsi | 44 ++++++ arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 121 ++------------- .../k3-j721e-common-proc-board-u-boot.dtsi | 118 ++------------ arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 43 ++++++ drivers/dma/ti/Kconfig | 4 + drivers/dma/ti/Makefile | 4 + drivers/dma/ti/k3-psil-am654.c | 89 +++++++++++ drivers/dma/ti/k3-psil-j721e.c | 47 ++++++ drivers/dma/ti/k3-psil-priv.h | 43 ++++++ drivers/dma/ti/k3-psil.c | 42 +++++ drivers/dma/ti/k3-psil.h | 67 ++++++++ drivers/dma/ti/k3-udma.c | 145 ++++++++++++------ include/dt-bindings/dma/k3-udma.h | 31 ---- 13 files changed, 510 insertions(+), 288 deletions(-) create mode 100644 drivers/dma/ti/k3-psil-am654.c create mode 100644 drivers/dma/ti/k3-psil-j721e.c create mode 100644 drivers/dma/ti/k3-psil-priv.h create mode 100644 drivers/dma/ti/k3-psil.c create mode 100644 drivers/dma/ti/k3-psil.h delete mode 100644 include/dt-bindings/dma/k3-udma.h
Signature · 1 line
2.27.0
Vignesh Raghavendra
maintainerPATCH v3 1/3 dma: ti: Add static PSIL endpoint information
Much of PSIL endpoint configuration for a given SoC can be known at compile time, therefore pass them for platform specific data instead of DT.
Add per SoC's specific PSIL endpoint data. This is to bring driver in sync with upstream DT.
--- drivers/dma/ti/Kconfig | 3 ++ drivers/dma/ti/Makefile | 4 ++ drivers/dma/ti/k3-psil-am654.c | 89 ++++++++++++++++++++++++++++++++++ drivers/dma/ti/k3-psil-j721e.c | 47 ++++++++++++++++++ drivers/dma/ti/k3-psil-priv.h | 43 ++++++++++++++++ drivers/dma/ti/k3-psil.c | 42 ++++++++++++++++ drivers/dma/ti/k3-psil.h | 67 +++++++++++++++++++++++++ 7 files changed, 295 insertions(+) create mode 100644 drivers/dma/ti/k3-psil-am654.c create mode 100644 drivers/dma/ti/k3-psil-j721e.c create mode 100644 drivers/dma/ti/k3-psil-priv.h create mode 100644 drivers/dma/ti/k3-psil.c create mode 100644 drivers/dma/ti/k3-psil.h
drivers/dma/ti/Kconfig +3 -0
@@ -12,3 +12,6 @@ config TI_K3_NAVSS_UDMA help Support for UDMA used in K3 devices. endif + +config TI_K3_PSIL + bool
drivers/dma/ti/Makefile +4 -0
@@ -1,3 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ obj-$(CONFIG_TI_K3_NAVSS_UDMA) += k3-udma.o +obj-$(CONFIG_TI_K3_PSIL) += k3-psil-data.o +k3-psil-data-y += k3-psil.o +k3-psil-data-$(CONFIG_SOC_K3_AM6) += k3-psil-am654.o +k3-psil-data-$(CONFIG_SOC_K3_J721E) += k3-psil-j721e.o
drivers/dma/ti/k3-psil-am654.c new file +89 -0
89 lines not on this page · raw message
drivers/dma/ti/k3-psil-j721e.c new file +47 -0
47 lines not on this page · raw message
drivers/dma/ti/k3-psil-priv.h new file +43 -0
43 lines not on this page · raw message
drivers/dma/ti/k3-psil.c new file +42 -0
42 lines not on this page · raw message
drivers/dma/ti/k3-psil.h new file +67 -0
67 lines not on this page · raw message
Signature · 1 line
2.27.0
Vignesh Raghavendra
maintainerPATCH v3 2/3 dma: ti: k3-udma: Update driver to use static endpoint Data
In reply to Vignesh RaghavendraUpdate driver to use static PSIL endpoint Data instead of DT. This will allow DT bindings to be in sync with kernel's DT.
Note that this patch breaks networking and OSPI boot as driver changes are not backward compatible with existing DT. Subsequent commit will update the DT to make it compatible with updated driver.
--- drivers/dma/ti/Kconfig | 1 + drivers/dma/ti/k3-udma.c | 145 +++++++++++++++++++++++++++------------ 2 files changed, 103 insertions(+), 43 deletions(-)
drivers/dma/ti/Kconfig +1 -0
@@ -8,6 +8,7 @@ config TI_K3_NAVSS_UDMA select DMA select TI_K3_NAVSS_RINGACC select TI_K3_NAVSS_PSILCFG + select TI_K3_PSIL default n help Support for UDMA used in K3 devices.
drivers/dma/ti/k3-udma.c +102 -43
199 lines not on this page · raw message
Signature · 1 line
2.27.0
Vignesh Raghavendra
maintainerPATCH v3 3/3 arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT
In reply to Vignesh RaghavendraSync DT bindings from kernel DT and move them to out of -u-boot.dtsi files.
--- arch/arm/dts/k3-am65-mcu.dtsi | 44 +++++++ arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 121 ++---------------- .../k3-j721e-common-proc-board-u-boot.dtsi | 118 ++--------------- arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 43 +++++++ include/dt-bindings/dma/k3-udma.h | 31 ----- 5 files changed, 112 insertions(+), 245 deletions(-) delete mode 100644 include/dt-bindings/dma/k3-udma.h
arch/arm/dts/k3-am65-mcu.dtsi +44 -0
@@ -102,4 +102,48 @@ #size-cells = <0>; }; }; + + mcu_navss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <119>; + + mcu_ringacc: ringacc at 2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <195>; + }; + + mcu_udmap: dma-controller at 285c0000 { + compatible = "ti,am654-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <194>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */ + <0x4>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */ + }; + }; };
arch/arm/dts/k3-am654-base-board-u-boot.dtsi +13 -108
150 lines not on this page · raw message
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +12 -106
149 lines not on this page · raw message
arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +43 -0
47 lines not on this page · raw message
include/dt-bindings/dma/k3-udma.h deleted +0 -31
@@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com -*/ - -#ifndef __DT_TI_UDMA_H -#define __DT_TI_UDMA_H - -#define UDMA_TR_MODE 0 -#define UDMA_PKT_MODE 1 - -#define UDMA_DIR_TX 0 -#define UDMA_DIR_RX 1 - -#define PSIL_STATIC_TR_NONE 0 -#define PSIL_STATIC_TR_XY 1 -#define PSIL_STATIC_TR_MCAN 2 - -#define UDMA_PDMA_TR_XY (id) \ - ti,psil-config##id { \ - linux,udma-mode = <UDMA_TR_MODE>; \ - statictr-type = <PSIL_STATIC_TR_XY>; \ - } - -#define UDMA_PDMA_PKT_XY (id) \ - ti,psil-config##id { \ - linux,udma-mode = <UDMA_PKT_MODE>; \ - statictr-type = <PSIL_STATIC_TR_XY>; \ - } - -#endif /* __DT_TI_UDMA_H */
Signature · 1 line
2.27.0
v3 cover Sync UDMA bindings from kernel
In reply to Vignesh RaghavendraQuoted 4 lines · Vignesh Raghavendra
UDMA DT bindings have deviated from kernel's DT for AM654 and J721e. This series updates UDMA driver and sync DT bindings
Tested OSPI and CPSW on AM654 and J721e after the changes
Applied to u-boot-ti.
Thanks and regards,
Lokesh