ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
PATCH 1/1 ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral".
Signed-off-by Michael Trimarchi <[email protected]>
--- arch/arm/boot/dts/rk3288-vyasa.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/boot/dts/rk3288-vyasa.dts +1 -2
@@ -87,8 +87,6 @@ pinctrl-0 = <&otg_vbus_drv>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; vin-supply = <&vsus_5v>; };
@@ -405,6 +403,7 @@ &usb_otg { status = "okay"; + vbus-supply = <&vusb1_5v>; }; &vopb {
Signature · 1 line
2.25.1
Heiko Stuebner
AppliedQuoted 5 lines · Michael Trimarchi
Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral".
Applied, thanks!
[1/1] ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
commit: 719646b76a41b8a482f8701825b635e9710ab329
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>