Skip to contentSkip to conversation

Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"

PATCH New Patrick Delaunay 2 participants 3 messages Jul 7, 2020 – Jul 28, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"

Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver.

The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.

This reverts commit 3c2e2a1a79608c5e046313a8c47586d9a734e2a3.

---

Changes in v2:
- correct commit message

 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 3 ---
 1 file changed, 3 deletions(-)
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +0 -3
index 69c5af4241..f96de9e7a3 100644
@@ -264,9 +264,6 @@
 
 &sdmmc1 {
 	u-boot,dm-spl;
-	broken-cd;
-	/delete-property/ cd-gpios;
-	/delete-property/ disable-wp;
 };
 
 &sdmmc1_b4_pins_a {
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"

Quoted 23 lines · Patrick Delaunay

Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver.

The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.

This reverts commit 3c2e2a1a79608c5e046313a8c47586d9a734e2a3.

---

Changes in v2:
- correct commit message

 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 3 ---
 1 file changed, 3 deletions(-)
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +0 -0
index 69c5af4241..f96de9e7a3 100644

arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi line 269

Quoted 9 lines
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +0 -3
@@ -264,9 +264,6 @@
 
 &sdmmc1 {
 	u-boot,dm-spl;
-	broken-cd;
-	/delete-property/ cd-gpios;
-	/delete-property/ disable-wp;
 };
 
 &sdmmc1_b4_pins_a {

Thanks

Patrice

#2 lore raw

PATCH v2 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"

Quoted 35 lines · Patrice CHOTARD
Quoted 23 lines · Patrick Delaunay

Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver.

The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.

This reverts commit 3c2e2a1a79608c5e046313a8c47586d9a734e2a3.

---

Changes in v2:
- correct commit message

 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 3 ---
 1 file changed, 3 deletions(-)
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +0 -0
index 69c5af4241..f96de9e7a3 100644

arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi line 269

Quoted 9 lines
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +0 -3
@@ -264,9 +264,6 @@
 
 &sdmmc1 {
 	u-boot,dm-spl;
-	broken-cd;
-	/delete-property/ cd-gpios;
-	/delete-property/ disable-wp;
 };
 
 &sdmmc1_b4_pins_a {
Quoted 7 lines

Thanks

Patrice
_______________________________________________
Uboot-stm32 mailing list
Uboot-stm32 at st-md-mailman.stormreply.com
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32

Applied to u-boot-stm/master

Thanks

Patrice