lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
PATCH v6 1/8 lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
From: Heiko Stuebner <[email protected]>
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL.
So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of:
lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ?struct checksum_algo?
To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new TPL_RSA_VERIFY config symbol needs to be added.
---
changes in v5:
- drop change that belongs in patch 2/8
changes in v4:
- amound -> amount
- found another entry to handle
changes in v2:
- fix typo "distinguis(h)"
lib/rsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/rsa/Makefile +1 -1
@@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
Signature · 1 line
2.26.2
PATCH v6 1/8 lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
Am Donnerstag, 18. Juni 2020, 16:23:21 CEST schrieb Heiko Stuebner:
Quoted 9 lines
From: Heiko Stuebner <[email protected]>
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL.
So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of:
Quoted 8 lines
lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ?structchecksum_algo?To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new
TPL_RSA_VERIFYconfig symbol needs to be added.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>
with it looking like everybody is happy with the fixes series now, whom do I need to pester into picking it up? :-D
Thanks
Heiko
Quoted 25 lines
---
changes in v5:
- drop change that belongs in patch 2/8
changes in v4:
- amound -> amount
- found another entry to handle
changes in v2:
- fix typo "distinguis(h)"lib/rsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)lib/rsa/Makefile +1
-1@@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
PATCH v6 1/8 lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
Quoted 16 lines · Heiko St?bner
Am Donnerstag, 18. Juni 2020, 16:23:21 CEST schrieb Heiko Stuebner:
Quoted 15 lines
From: Heiko Stuebner <[email protected]>
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL.
So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of:
lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ?structchecksum_algo?To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new
TPL_RSA_VERIFYconfig symbol needs to be added.
Quoted 5 lines
Quoted 2 lines
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>with it looking like everybody is happy with the fixes series now, whom do I need to pester into picking it up? :-D
No pestering needed :) The series is assigned to Tom:
https://patchwork.ozlabs.org/project/uboot/list/?series=184291
Best regards
Heinrich
Quoted 35 lines
Thanks
HeikoQuoted 25 lines
---
changes in v5:
- drop change that belongs in patch 2/8
changes in v4:
- amound -> amount
- found another entry to handle
changes in v2:
- fix typo "distinguis(h)"lib/rsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)lib/rsa/Makefile +1
-1@@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
PATCH v6 2/8 lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
Right now in multiple places there are only checks for the full CONFIG_RSA_VERIFY_WITH_PKEY option, not split into main,spl,tpl variants.
This breaks when the rsa functions get enabled for SPL, for example to verify u-boot proper from spl.
So fix this by using the existing helpers to distinguis between build-steps.
---
changes in v5:
- include the additional config-check that landed in patch 1/8 in v4
changes in v3.1:
- drop changeid
changes in v3:
- new patch with another build issue
lib/rsa/Makefile | 2 +- lib/rsa/rsa-verify.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
lib/rsa/Makefile +1 -1
@@ -6,5 +6,5 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o -obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o +obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
lib/rsa/rsa-verify.c +3 -3
@@ -285,7 +285,7 @@ out: }#endif -#if CONFIG_IS_ENABLED (FIT_SIGNATURE ) ||IS_ENABLED (CONFIG_RSA_VERIFY_WITH_PKEY ) +#if CONFIG_IS_ENABLED (FIT_SIGNATURE ) ||CONFIG_IS_ENABLED (RSA_VERIFY_WITH_PKEY )/** * rsa_verify_key() - Verify a signature against some data using RSA Key *
@@ -359,7 +359,7 @@ static int rsa_verify_key(struct image_sign_info *info, }#endif -#ifdef CONFIG_RSA_VERIFY_WITH_PKEY +#if CONFIG_IS_ENABLED (RSA_VERIFY_WITH_PKEY )/** * rsa_verify_with_pkey() - Verify a signature against some data using * only modulus and exponent as RSA key properties.
@@ -492,7 +492,7 @@ int rsa_verify(struct image_sign_info *info,return -EINVAL ; } -if (IS_ENABLED (CONFIG_RSA_VERIFY_WITH_PKEY ) && !info->fdt_blob) { +if (CONFIG_IS_ENABLED (RSA_VERIFY_WITH_PKEY ) && !info->fdt_blob) {/* don't rely on fdt properties */ ret =rsa_verify_with_pkey (info, hash, sig, sig_len);
Signature · 1 line
2.26.2
PATCH v6 2/8 lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()
Quoted 22 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
Right now in multiple places there are only checks for the full
CONFIG_RSA_VERIFY_WITH_PKEYoption, not split into main,spl,tpl variants.This breaks when the rsa functions get enabled for SPL, for example to verify u-boot proper from spl.
So fix this by using the existing helpers to distinguis between build-steps.
Signed-off-by Heiko Stuebner <[email protected]>---
changes in v5:
- include the additional config-check that landed in patch 1/8 in v4
changes in v3.1:
- drop changeid
changes in v3:
- new patch with another build issue
Quoted 3 lines
lib/rsa/Makefile | 2 +- lib/rsa/rsa-verify.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
PATCH v6 2/8 lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()
In reply to Heiko StuebnerQuoted 5 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
Right now in multiple places there are only checks for the full
CONFIG_RSA_VERIFY_WITH_PKEYoption, not split into main,spl,tpl variants.
Quoted 8 lines
This breaks when the rsa functions get enabled for SPL, for example to verify u-boot proper from spl.
So fix this by using the existing helpers to distinguis between build-steps.
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/5aa1475c/attachment.sig>
PATCH v6 3/8 lib: rsa: bring exp_len in line when generating a key_prop
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
The exponent field of struct key_prop gets allocated an uint64_t, and the contents are positioned from the back, so an exponent of "0x01 0x00 0x01" becomes 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x1"
Right now rsa_gen_key_prop() allocates a uint64_t but sets exp_len to the size returned from the parser, while on the other hand the when getting the key from the devicetree exp_len always gets set to sizeof(uint64_t).
So bring that in line with the established code.
---
changes in v4:
- new patch
lib/rsa/rsa-keyprop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/rsa/rsa-keyprop.c +1 -1
@@ -691,7 +691,7 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop)memcpy ((void *)(*prop)->public_exponent +sizeof (uint64_t ) - rsa_key.e_sz, rsa_key.e, rsa_key.e_sz); - (*prop)->exp_len = rsa_key.e_sz; + (*prop)->exp_len =sizeof (uint64_t );/* n0 inverse */ br_i32_decode (n, &rsa_key.n[i], rsa_key.n_sz - i);
Signature · 1 line
2.26.2
PATCH v6 3/8 lib: rsa: bring exp_len in line when generating a key_prop
Quoted 14 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The exponent field of struct
key_propgets allocated anuint64_t, and the contents are positioned from the back, so an exponent of "0x010x000x01" becomes0x00x00x00x00x00x10x00x1"Right now
rsa_gen_key_prop()allocates auint64_tbut setsexp_lento the size returned from the parser, while on the other hand the when getting the key from the devicetreeexp_lenalways gets set tosizeof(uint64_t).So bring that in line with the established code.
Quoted 7 lines
Signed-off-by Heiko Stuebner <[email protected]>---
changes in v4:
- new patchlib/rsa/rsa-keyprop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH v6 3/8 lib: rsa: bring exp_len in line when generating a key_prop
In reply to Heiko StuebnerQuoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The exponent field of struct
key_propgets allocated anuint64_t, and the contents are positioned from the back, so an exponent of "0x010x000x01" becomes0x00x00x00x00x00x10x00x1"Right now
rsa_gen_key_prop()allocates auint64_tbut setsexp_lento the size returned from the parser, while on the other hand the when getting the key from the devicetreeexp_lenalways gets set tosizeof(uint64_t).
Quoted 4 lines
So bring that in line with the established code.
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/3bbde056/attachment.sig>
PATCH v6 4/8 lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
When calculating rrtmp/rr rsa_gen_key_prop() tries to make (((rlen + 31) >> 5) + 1) steps in the rr uint32_t array and (((rlen + 7) >> 3) + 1) / 4 steps in uint32_t rrtmp[] with rlen being num_bits * 2
On a 4096bit key this comes down to to 257 uint32_t elements in rr and 256 elements in rrtmp but with the current allocation rr and rrtmp only have 129 uint32_t elements.
On 2048bit keys this works by chance as the defined max_rsa_size=4096 allocates a suitable number of elements, but with an actual 4096bit key this results in other memory parts getting overwritten.
So as suggested by Heinrich Schuchardt just use the actual bis-size of the key as base for the size calculation, in turn making the code compatible to any future keysizes.
---
changes in v6:
- drop max_rsa_size and use the keysize as base
changes in v4:
- new patch
lib/rsa/rsa-keyprop.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
lib/rsa/rsa-keyprop.c +9 -5
@@ -654,14 +654,10 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) {struct rsa_key rsa_key;uint32_t *n =NULL , *rr =NULL , *rrtmp =NULL ; -const int max_rsa_size =4096 ;int rlen, i, ret; *prop =calloc (sizeof (**prop),1 ); - n =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); - rr =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); - rrtmp =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); -if (!(*prop) || !n || !rr || !rrtmp) { +if (!(*prop)) { ret = -ENOMEM ; goto err; }
@@ -682,6 +678,14 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) }memcpy ((void *)(*prop)->modulus, &rsa_key.n[i], rsa_key.n_sz - i); + n =calloc (sizeof (uint32_t ),1 + ((*prop)->num_bits >>5 )); + rr =calloc (sizeof (uint32_t ),1 + (((*prop)->num_bits *2 ) >>5 )); + rrtmp =calloc (sizeof (uint32_t ),1 + (((*prop)->num_bits *2 ) >>5 )); +if (!n || !rr || !rrtmp) { + ret = -ENOMEM ; + goto out; + } +/* exponent */ (*prop)->public_exponent =calloc (1 ,sizeof (uint64_t ));if (!(*prop)->public_exponent) {
Signature · 1 line
2.26.2
PATCH v6 4/8 lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()
Quoted 22 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
When calculating rrtmp/rr
rsa_gen_key_prop()tries to make (((rlen + 31) >> 5) + 1) steps in the rruint32_tarray and (((rlen + 7) >> 3) + 1) / 4 steps inuint32_trrtmp[] with rlen beingnum_bits* 2On a 4096bit key this comes down to to 257
uint32_telements in rr and 256 elements in rrtmp but with the current allocation rr and rrtmp only have 129uint32_telements.On 2048bit keys this works by chance as the defined max_rsa_size=4096 allocates a suitable number of elements, but with an actual 4096bit key this results in other memory parts getting overwritten.
So as suggested by Heinrich Schuchardt just use the actual bis-size of the key as base for the size calculation, in turn making the code compatible to any future keysizes.
Suggested-by Heinrich Schuchardt <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>
Quoted 8 lines
---
changes in v6:
- dropmax_rsa_sizeand use the keysize as base
changes in v4:
- new patchlib/rsa/rsa-keyprop.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
PATCH v6 4/8 lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()
In reply to Heiko StuebnerQuoted 51 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
When calculating rrtmp/rr
rsa_gen_key_prop()tries to make (((rlen + 31) >> 5) + 1) steps in the rruint32_tarray and (((rlen + 7) >> 3) + 1) / 4 steps inuint32_trrtmp[] with rlen beingnum_bits* 2On a 4096bit key this comes down to to 257
uint32_telements in rr and 256 elements in rrtmp but with the current allocation rr and rrtmp only have 129uint32_telements.On 2048bit keys this works by chance as the defined max_rsa_size=4096 allocates a suitable number of elements, but with an actual 4096bit key this results in other memory parts getting overwritten.
So as suggested by Heinrich Schuchardt just use the actual bis-size of the key as base for the size calculation, in turn making the code compatible to any future keysizes.
Suggested-by Heinrich Schuchardt <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>---
changes in v6:
- dropmax_rsa_sizeand use the keysize as base
changes in v4:
- new patchlib/rsa/rsa-keyprop.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)lib/rsa/rsa-keyprop.c +1
-5@@ -654,14 +654,10 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) {struct rsa_key rsa_key;uint32_t *n =NULL , *rr =NULL , *rrtmp =NULL ; -const int max_rsa_size =4096 ;int rlen, i, ret; *prop =calloc (sizeof (**prop),1 ); - n =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); - rr =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); - rrtmp =calloc (sizeof (uint32_t ),1 + (max_rsa_size >>5 )); -if (!(*prop) || !n || !rr || !rrtmp) { +if (!(*prop)) { ret = -ENOMEM ; goto err; }
lib/rsa/rsa-keyprop.c int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) · line 683
Quoted 6 lines
lib/rsa/rsa-keyprop.c +3
-0@@ -682,6 +678,14 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) }memcpy ((void *)(*prop)->modulus, &rsa_key.n[i], rsa_key.n_sz - i); + n =calloc (sizeof (uint32_t ),1 + ((*prop)->num_bits >>5 )); + rr =calloc (sizeof (uint32_t ),1 + (((*prop)->num_bits *2 ) >>5 )); + rrtmp =calloc (sizeof (uint32_t ),1 + (((*prop)->num_bits *2 ) >>5 ));
At least for rrtmp you need
2 + (((*prop)->num_bits * 2) >> 5)
For num_bits = 2048 br_i32_decode() writes to indices 0..129.
@Takahiro
This is why the code crashes even with an RSA 2048 key on qemu_arm_defconfig.
Best regards
Heinrich
Quoted 9 lines
lib/rsa/rsa-keyprop.c +5
-0+if (!n || !rr || !rrtmp) { + ret = -ENOMEM ; + goto out; + } +/* exponent */ (*prop)->public_exponent =calloc (1 ,sizeof (uint64_t ));if (!(*prop)->public_exponent) {
PATCH v6 5/8 lib: rsa: free local arrays after use in rsa_gen_key_prop()
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
n, rr and rrtmp are used for internal calculations, but in the end the results are copied into separately allocated elements of the actual key_prop, so the n, rr and rrtmp elements are not used anymore when returning from the function and should of course be freed.
---
changes in v4:
- new patch
lib/rsa/rsa-keyprop.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
lib/rsa/rsa-keyprop.c +9 -10
@@ -654,17 +654,17 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) {struct rsa_key rsa_key;uint32_t *n =NULL , *rr =NULL , *rrtmp =NULL ; -int rlen, i, ret; +int rlen, i, ret =0 ; *prop =calloc (sizeof (**prop),1 );if (!(*prop)) { ret = -ENOMEM ; - goto err; + goto out; } ret =rsa_parse_pub_key (&rsa_key, key, keylen);if (ret) - goto err; + goto out;/* modulus */ /* removing leading 0's */
@@ -674,7 +674,7 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) (*prop)->modulus =malloc (rsa_key.n_sz - i);if (!(*prop)->modulus) { ret = -ENOMEM ; - goto err; + goto out; }memcpy ((void *)(*prop)->modulus, &rsa_key.n[i], rsa_key.n_sz - i);
@@ -690,7 +690,7 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) (*prop)->public_exponent =calloc (1 ,sizeof (uint64_t ));if (!(*prop)->public_exponent) { ret = -ENOMEM ; - goto err; + goto out; } memcpy((void *)(*prop)->public_exponent + sizeof(uint64_t) - rsa_key.e_sz,
@@ -714,16 +714,15 @@ int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop) (*prop)->rr =malloc (rlen);if (!(*prop)->rr) { ret = -ENOMEM ; - goto err; + goto out; }br_i32_encode ((void *)(*prop)->rr, rlen, rr); -return 0 ; - -err: +out:free (n);free (rr);free (rrtmp); -rsa_free_key_prop (*prop); +if (ret <0 ) +rsa_free_key_prop (*prop);return ret; }
Signature · 1 line
2.26.2
PATCH v6 5/8 lib: rsa: free local arrays after use in rsa_gen_key_prop()
Quoted 8 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
n, rr and rrtmp are used for internal calculations, but in the end the results are copied into separately allocated elements of the actual
key_prop, so the n, rr and rrtmp elements are not used anymore when returning from the function and should of course be freed.
Quoted 7 lines
Signed-off-by Heiko Stuebner <[email protected]>---
changes in v4:
- new patchlib/rsa/rsa-keyprop.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
PATCH v6 5/8 lib: rsa: free local arrays after use in rsa_gen_key_prop()
In reply to Heiko StuebnerQuoted 9 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
n, rr and rrtmp are used for internal calculations, but in the end the results are copied into separately allocated elements of the actual
key_prop, so the n, rr and rrtmp elements are not used anymore when returning from the function and should of course be freed.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/9dbbe1e2/attachment.sig>
PATCH v6 6/8 lib: rsa: add documentation to padding_pss_verify to document limitations
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
padding_pss_verify only works with the default pss salt setting of -2 (length to be automatically determined based on the PSS block structure) not -1 (salt length set to the maximum permissible value), which makes verifications of signatures with that saltlen fail.
Until this gets implemented at least document this behaviour.
---
changes in v4:
- new patch
lib/rsa/rsa-verify.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
lib/rsa/rsa-verify.c +13 -0
@@ -194,6 +194,19 @@ out:return ret; } +/* +* padding_pss_verify() - verify the pss padding of a signature +* +* Only works with a rsa_pss_saltlen:-2 (default value) right now +* saltlen:-1 "set the salt length to the digest length" is currently +* not supported. +* +* @info: Specifies key and FIT information +* @msg: byte array of message, len equal to msg_len +* @msg_len: Message length +* @hash: Pointer to the expected hash +* @hash_len: Length of the hash +*/ int padding_pss_verify (struct image_sign_info *info,uint8_t *msg,int msg_len,const uint8_t *hash,int hash_len)
Signature · 1 line
2.26.2
PATCH v6 6/8 lib: rsa: add documentation to padding_pss_verify to document limitations
Quoted 10 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
padding_pss_verifyonly works with the default pss salt setting of -2 (length to be automatically determined based on the PSS block structure) not -1 (salt length set to the maximum permissible value), which makes verifications of signatures with that saltlen fail.Until this gets implemented at least document this behaviour.
Quoted 7 lines
Signed-off-by Heiko Stuebner <[email protected]>---
changes in v4:
- new patchlib/rsa/rsa-verify.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
PATCH v6 6/8 lib: rsa: add documentation to padding_pss_verify to document limitations
In reply to Heiko StuebnerQuoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
padding_pss_verifyonly works with the default pss salt setting of -2 (length to be automatically determined based on the PSS block structure) not -1 (salt length set to the maximum permissible value), which makes verifications of signatures with that saltlen fail.Until this gets implemented at least document this behaviour.
Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/d39881c9/attachment.sig>
PATCH v6 7/8 spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
rsa-checsum needs support for hash functions or else will run into compile errors like:u-boot/lib/rsa/rsa-checksum.c:28: undefined reference to `hash_progressive_lookup_algo'
So similar to the main FIT_SIGNATURE entry selects HASH, select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE.
--- Kconfig | 1 + 1 file changed, 1 insertion(+)
Kconfig +1 -0
@@ -459,6 +459,7 @@ config SPL_FIT_SIGNATURE bool "Enable signature verification of FIT firmware within SPL" depends on SPL_DM select SPL_FIT + select SPL_HASH_SUPPORT select SPL_RSA select SPL_RSA_VERIFY select SPL_IMAGE_SIGN_INFO
Signature · 1 line
2.26.2
PATCH v6 7/8 spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE
Quoted 10 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
rsa-checsum needs support for hash functions or else will run into compile errors like:
u-boot/lib/rsa/rsa-checksum.c:28: undefined reference to `hash_progressive_lookup_algo'So similar to the main
FIT_SIGNATUREentry selects HASH, selectSPL_HASH_SUPPORTforSPL_FIT_SIGNATURE.
Quoted 7 lines
Cc Heinrich Schuchardt <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>--- Kconfig | 1 + 1 file changed, 1 insertion(+)
PATCH v6 7/8 spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE
In reply to Heiko StuebnerQuoted 6 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
rsa-checsum needs support for hash functions or else will run into compile errors like:
u-boot/lib/rsa/rsa-checksum.c:28: undefined reference to `hash_progressive_lookup_algo'
Quoted 7 lines
So similar to the main
FIT_SIGNATUREentry selects HASH, selectSPL_HASH_SUPPORTforSPL_FIT_SIGNATURE.Cc Heinrich Schuchardt <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/72e63ba5/attachment.sig>
PATCH v6 1/8 lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
In reply to Heiko StuebnerQuoted 27 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL.
So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of:
lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ?structchecksum_algo?To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new
TPL_RSA_VERIFYconfig symbol needs to be added.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>---
changes in v5:
- drop change that belongs in patch 2/8
changes in v4:
- amound -> amount
- found another entry to handle
changes in v2:
- fix typo "distinguis(h)"
Quoted 3 lines
lib/rsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH v6 8/8 spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE
In reply to Heiko StuebnerFrom: Heiko Stuebner <[email protected]>
Verifying FIT images obviously needs the rsa parts of crypto support and while main uboot always compiles crypto support, it's optional for SPL and we should thus select the necessary option to not end up in compile errors like:
u-boot/lib/rsa/rsa-verify.c:328: undefined reference to `rsa_mod_exp'
So select SPL_CRYPTO_SUPPORT in SPL_FIT_SIGNATURE.
--- Kconfig | 1 + 1 file changed, 1 insertion(+)
Kconfig +1 -0
@@ -459,6 +459,7 @@ config SPL_FIT_SIGNATURE bool "Enable signature verification of FIT firmware within SPL" depends on SPL_DM select SPL_FIT + select SPL_CRYPTO_SUPPORT select SPL_HASH_SUPPORT select SPL_RSA select SPL_RSA_VERIFY
Signature · 1 line
2.26.2
PATCH v6 8/8 spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE
Quoted 10 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
Verifying FIT images obviously needs the rsa parts of crypto support and while main uboot always compiles crypto support, it's optional for SPL and we should thus select the necessary option to not end up in compile errors like:
u-boot/lib/rsa/rsa-verify.c:328: undefined reference to `rsa_mod_exp'
Quoted 7 lines
So select
SPL_CRYPTO_SUPPORTinSPL_FIT_SIGNATURE.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>--- Kconfig | 1 + 1 file changed, 1 insertion(+)
PATCH v6 8/8 spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE
In reply to Heiko StuebnerQuoted 7 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
Verifying FIT images obviously needs the rsa parts of crypto support and while main uboot always compiles crypto support, it's optional for SPL and we should thus select the necessary option to not end up in compile errors like:
Quoted 7 lines
u-boot/lib/rsa/rsa-verify.c:328: undefined reference to `rsa_mod_exp'So select
SPL_CRYPTO_SUPPORTinSPL_FIT_SIGNATURE.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/78c9f6c3/attachment.sig>
PATCH v6 1/8 lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY
In reply to Heiko StuebnerQuoted 11 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
While the SPL may want to do signature checking this won't be the case for TPL in all cases, as TPL is mostly used when the amount of initial memory is not enough for a full SPL.
So on a system where SPL uses DM but TPL does not we currently end up with a TPL compile error of:
lib/rsa/rsa-verify.c:48:25: error: dereferencing pointer to incomplete type ?structchecksum_algo?
Quoted 7 lines
To prevent that change the $(SPL_) to $(SPL_TPL_) to distinguish between both. If someone really needs FIT signature checking in TPL as well, a new
TPL_RSA_VERIFYconfig symbol needs to be added.Signed-off-by Heiko Stuebner <[email protected]>Reviewed-by Philipp Tomsich <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200708/90458cec/attachment.sig>