package/freescale-imx/imx-seco: bump version to 3.6.3
PATCH 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
package/freescale-imx/imx-seco/imx-seco.hash +3 -3
@@ -1,4 +1,4 @@ # Locally calculated -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING
package/freescale-imx/imx-seco/imx-seco.mk +3 -3
@@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin
@@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in post-image script. ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qm-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qmb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef endif
Signature · 1 line
2.17.1
PATCH 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
Hi Maeva,
Thank you for your contribution, please see my comments below.
Quoted 17 lines · Maeva Manuel
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
Tested-by Maeva Manuel <[email protected]>[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
Signed-off-by Maeva Manuel <[email protected]>--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)package/freescale-imx/imx-seco/imx-seco.hash +0
-0
package/freescale-imx/imx-seco/imx-seco.hash line 4
Quoted 7 lines
package/freescale-imx/imx-seco/imx-seco.hash +3
-3@@ -1,4 +1,4 @@ # Locally calculated -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING
Usually when EULA/COPYING is updated it means there are new terms, can you drop a line on this in your commit log?
Quoted 14 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1@@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin
package/freescale-imx/imx-seco/imx-seco.mk IMX_SECO_INSTALL_IMAGES = YES · line 26
Quoted 6 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1@@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in post-image script. ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img
What about C0 firmware? Are C0 CPU already available? If so, maybe there should be a way to select which version we want to use.
Or another approach would be to copy them all without renaming and have the final script pick the right one depending on some configuration.
Let me know your thoughts.
Regards,
Gary
PATCH 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
Hello Gary,
License was updated from:LA_OPT_NXP_Software_License v10 December 2019 to:LA_OPT_NXP_Software_License v11 February 2020 which explain the change of EULA/COPYING license files.
This LA_OPT_NXP_Software_License is used by a wide range proprietary binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, VPU firmwares, ...). It is periodically updated with the introduction of new products. It's recommended to review it in detail with, if a system uses it in production.
Regarding the C0 revision of i.MX8QXP:
1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK boards.
2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) adds support for this chip.
3) In order not to break the compatibility with the BR imx-seco 2.3.1 package, it remains with B0 support.
4) I think it's not a good idea that it's the final script that chooses the right file, because the names often change. This could mean that the script would have to be updated every time the package is updated too. By being in the recipe it collects all the changes in the recipe.
5) C0 support should introduce a Kconfig, and this will be done in a future patch.
Regards,
Maeva
-----Original Message-----
From: Gary Bisson <[email protected]>
Sent: Wednesday, July 8, 2020 2:15 PM
To: Maeva Manuel (OSS) <[email protected]>
Cc: buildroot at buildroot.org; Gary Bisson <[email protected]>; Refik Tuzakli <[email protected]>
Subject: Re: [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3
Hi Maeva,
Thank you for your contribution, please see my comments below.
Quoted 27 lines · Maeva Manuel
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
Tested-by Maeva Manuel <[email protected]>[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
Signed-off-by Maeva Manuel <[email protected]>--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)package/freescale-imx/imx-seco/imx-seco.hash +0
-1@@ -1,4 +1,4 @@ # Locally calculated -sha256
b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824imx-seco-2.3.1.bin
-sha25669d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9cEULA -sha2566467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46COPYING
package/freescale-imx/imx-seco/imx-seco.hash
Quoted 9 lines
package/freescale-imx/imx-seco/imx-seco.hash +9
-0+sha256 +52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd +imx-seco-3.6.3.bin +sha256 +7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 +EULA +sha256 +2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d +COPYING
Usually when EULA/COPYING is updated it means there are new terms, can you drop a line on this in your commit log?
Quoted 20 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1@@ -4,7 +4,7 @@ # ###################################################################### ########## -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE =imx-seco-$(IMX_SECO_VERSION).bin
package/freescale-imx/imx-seco/imx-seco.mk +0
-0@@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done inpost-image script.
ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) defineIMX_SECO_INSTALL_IMAGES_CMDS
package/freescale-imx/imx-seco/imx-seco.mk IMX_SECO_INSTALL_IMAGES = YES · line 26
Quoted 3 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1- cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img
What about C0 firmware? Are C0 CPU already available? If so, maybe there should be a way to select which version we want to use. Or another approach would be to copy them all without renaming and have the final script pick the right one depending on some configuration.
Let me know your thoughts.
Regards,
Gary
PATCH 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
Hi,
Maeva Manuel (OSS) <[email protected]> schrieb am Do., 9. Juli 2020, 08:54:
Quoted 16 lines
Hello Gary,
License was updated from:
LA_OPT_NXP_Software_Licensev10 December 2019 to:LA_OPT_NXP_Software_Licensev11 February 2020 which explain the change of EULA/COPYING license files.This
LA_OPT_NXP_Software_Licenseis used by a wide range proprietary binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, VPU firmwares, ...). It is periodically updated with the introduction of new products. It's recommended to review it in detail with, if a system uses it in production.Regarding the C0 revision of i.MX8QXP:
Quoted 11 lines
1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK boards.
2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) adds support for this chip.
3) In order not to break the compatibility with the BR imx-seco 2.3.1 package, it remains with B0 support.
4) I think it's not a good idea that it's the final script that chooses the right file, because the names often change. This could mean that the script would have to be updated every time the package is updated too. By being in the recipe it collects all the changes in the recipe.
What about other boards that rely on e.g. the C0 Firmware. Shouln't we export all variants and create a link to the one used for the EVK board?
5) C0 support should introduce a Kconfig, and this will be done in a future
Quoted 89 lines
patch.
Regards,
Maeva
-----Original Message-----
From: Gary Bisson <[email protected]>
Sent: Wednesday, July 8, 2020 2:15 PM
To: Maeva Manuel (OSS) <[email protected]>
Cc: buildroot at buildroot.org; Gary Bisson <[email protected]>; Refik Tuzakli <[email protected]>
Subject: Re: [Buildroot] [PATCH 1/1] package/freescale-imx/imx-seco: bump version to 3.6.3Hi Maeva,
Thank you for your contribution, please see my comments below.
Quoted 27 lines · Maeva Manuel
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
Tested-by Maeva Manuel <[email protected]>[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
Signed-off-by Maeva Manuel <[email protected]>--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)package/freescale-imx/imx-seco/imx-seco.hash +0
-1@@ -1,4 +1,4 @@ # Locally calculated -sha256
b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824imx-seco-2.3.1.bin
-sha25669d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9cEULA -sha2566467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46COPYINGpackage/freescale-imx/imx-seco/imx-seco.hash
Quoted 9 lines
package/freescale-imx/imx-seco/imx-seco.hash +9
-0+sha256 +52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd +imx-seco-3.6.3.bin +sha256 +7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 +EULA +sha256 +2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d +COPYINGUsually when EULA/COPYING is updated it means there are new terms, can you drop a line on this in your commit log?
Quoted 20 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1@@ -4,7 +4,7 @@ # ###################################################################### ########## -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE =imx-seco-$(IMX_SECO_VERSION).bin
package/freescale-imx/imx-seco/imx-seco.mk +0
-0@@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done inpost-image script.
ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) defineIMX_SECO_INSTALL_IMAGES_CMDSpackage/freescale-imx/imx-seco/imx-seco.mk IMX_SECO_INSTALL_IMAGES = YES · line 26
Quoted 3 lines
package/freescale-imx/imx-seco/imx-seco.mk +1
-1- cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.imgWhat about C0 firmware? Are C0 CPU already available? If so, maybe there should be a way to select which version we want to use.
Or another approach would be to copy them all without renaming and have the final script pick the right one depending on some configuration.
Quoted 9 lines
Let me know your thoughts.
Regards,
Gary
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200709/747d7473/attachment.html>
PATCH 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
In reply to Maeva Manuel (OSS)Hi Maeva,
Quoted 8 lines · Maeva Manuel (OSS)
Hello Gary,
License was updated from:
LA_OPT_NXP_Software_Licensev10 December 2019 to:LA_OPT_NXP_Software_Licensev11 February 2020 which explain the change of EULA/COPYING license files.
Quoted 5 lines
This
LA_OPT_NXP_Software_Licenseis used by a wide range proprietary binaries/firmwares, from NXP and also 3rd parties (e.g. DDR firmwares, VPU firmwares, ...). It is periodically updated with the introduction of new products. It's recommended to review it in detail with, if a system uses it in production.
Yes that's fine, a simple line to explain the EULA was updated to its Feb. 2020 version is sufficient, but it should be there.
Quoted 7 lines
Regarding the C0 revision of i.MX8QXP:
1) The QXP C0 chip exists publicly, it's on the latest revisions of EVK boards.
2) The imx-seco 3.6.3 package (just like the rest of the BSP 5.4.24_2.1.0) adds support for this chip.
3) In order not to break the compatibility with the BR imx-seco 2.3.1 package, it remains with B0 support.
4) I think it's not a good idea that it's the final script that chooses the right file, because the names often change. This could mean that the script would have to be updated every time the package is updated too. By being in the recipe it collects all the changes in the recipe.
5) C0 support should introduce aKconfig, and this will be done in a future patch.
Fair enough, but same it then should be in the commit log so that people using C0 firmware know it is coming.
Regards,
Gary
PATCH v2 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
In reply to Maeva ManuelThis version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
In order not to break the compatibility with the imx-seco 2.3.1 package, it remains B0 support for i.MX8QXP MEK.
C0 support should introduce a Kconfig and this will be done in a future patch.
License was updated from:LA_OPT_NXP_Software_License v10 December 2019 to:LA_OPT_NXP_Software_License v11 February 2020 which explains the change of EULA/COPYING license files.
[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
---
Changes v1 -> v2:
Suggested by Gary:
- Add a commit log comment about license change
- Add a commit log comment about the rev C0 support of i.MX8QXP MEK
--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
package/freescale-imx/imx-seco/imx-seco.hash +3 -3
@@ -1,4 +1,4 @@ # Locally calculated -sha256 b429ac58b2ea1771b3fdf7ae87bf1d37ccaf596bde01a5ecccae27b2145f6824 imx-seco-2.3.1.bin -sha256 69d19847bac9af7f9e832170a15138f5ef144d8064413434114d75a68982cc9c EULA -sha256 6467f2e81d06b19fe541de49bdba32a9a205e8d1c230220fe24247b48672cb46 COPYING +sha256 52ba07633e0f8707d8c26724b5cd03ef96444c8de1e0e134acac50acacf3e7dd imx-seco-3.6.3.bin +sha256 7ffad92e72e5f6b23027e7cf93a770a4acef00a92dcf79f22701ed401c5478c0 EULA +sha256 2ceab29de5ea533b86f570bcc4e9ddbfb5fe85a1da4978a8613ff3fd9bed781d COPYING
package/freescale-imx/imx-seco/imx-seco.mk +3 -3
@@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 2.3.1 +IMX_SECO_VERSION = 3.6.3 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin
@@ -22,12 +22,12 @@ IMX_SECO_INSTALL_IMAGES = YES # is done in post-image script. ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qx-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qxb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8),y) define IMX_SECO_INSTALL_IMAGES_CMDS - cp $(@D)/firmware/seco/mx8qm-ahab-container.img \ + cp $(@D)/firmware/seco/mx8qmb0-ahab-container.img \ $(BINARIES_DIR)/ahab-container.img endef endif
Signature · 1 line
2.17.1
PATCH v2 1/1 package/freescale-imx/imx-seco: bump version to 3.6.3
Hi Maeva,
Quoted 14 lines · Maeva Manuel
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP. Firmware file names now include the SoC revision.
In order not to break the compatibility with the imx-seco 2.3.1 package, it remains B0 support for i.MX8QXP MEK.
C0 support should introduce aKconfigand this will be done in a future patch.License was updated from:
LA_OPT_NXP_Software_Licensev10 December 2019 to:LA_OPT_NXP_Software_Licensev11 February 2020 which explains the change of EULA/COPYING license files.
Quoted 4 lines
Tested-by Maeva Manuel <[email protected]>[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0) and on i.MX8QM MEK (SoC rev B0)]
Signed-off-by Maeva Manuel <[email protected]>
Thanks for spinning the v2 quickly and for the contribution.
Regards,
Gary