remove PROT_SAO support and disable
Subsystems (8)
Nicholas Piggin
reviewerv2 cover remove PROT_SAO support and disable
It was suggested that I post this to a wider audience on account of the change to supported userspace features in patch 2 particularly.
Thanks,
Nick
Nicholas Piggin (3):
powerpc: remove stale calc_vm_prot_bits comment powerpc/64s: remove PROT_SAO support powerpc/64s/hash: disable subpage_prot syscall by default
arch/powerpc/Kconfig | 7 +++- arch/powerpc/configs/powernv_defconfig | 1 - arch/powerpc/configs/pseries_defconfig | 1 - arch/powerpc/include/asm/book3s/64/pgtable.h | 8 ++-- arch/powerpc/include/asm/cputable.h | 10 ++--- arch/powerpc/include/asm/kvm_book3s_64.h | 5 ++- arch/powerpc/include/asm/mman.h | 30 ++----------- arch/powerpc/include/asm/nohash/64/pgtable.h | 2 - arch/powerpc/include/uapi/asm/mman.h | 2 +- arch/powerpc/kernel/dt_cpu_ftrs.c | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 2 - include/linux/mm.h | 2 - include/trace/events/mmflags.h | 2 - mm/ksm.c | 4 -- tools/testing/selftests/powerpc/mm/.gitignore | 1 - tools/testing/selftests/powerpc/mm/Makefile | 4 +- tools/testing/selftests/powerpc/mm/prot_sao.c | 42 ------------------- 17 files changed, 25 insertions(+), 100 deletions(-) delete mode 100644 tools/testing/selftests/powerpc/mm/prot_sao.c
Signature · 1 line
2.23.0
Nicholas Piggin
reviewerPATCH v2 1/3 powerpc: remove stale calc_vm_prot_bits comment
This comment is wrong, we wouldn't use calc_vm_prot_bits here because we are being called by calc_vm_prot_bits to modify its behaviour.
--- arch/powerpc/include/asm/mman.h | 4 ---- 1 file changed, 4 deletions(-)
arch/powerpc/include/asm/mman.h +0 -4
@@ -13,10 +13,6 @@#include <linux/pkeys.h> #include <asm/cpu_has_feature.h> -/* -* This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() -* here. How important is the optimization? -*/ static inline unsigned long arch_calc_vm_prot_bits (unsigned long prot,unsigned long pkey) {
Signature · 1 line
2.23.0
Nicholas Piggin
reviewerPATCH v2 2/3 powerpc/64s: remove PROT_SAO support
In reply to Nicholas PigginISA v3.1 does not support the SAO storage control attribute required to implement PROT_SAO. PROT_SAO was used by specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because live migrating guest partitions to newer processors may not be possible if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO so applications would get a failure at mmap() time.
--- arch/powerpc/include/asm/book3s/64/pgtable.h | 8 ++-- arch/powerpc/include/asm/cputable.h | 10 ++--- arch/powerpc/include/asm/kvm_book3s_64.h | 5 ++- arch/powerpc/include/asm/mman.h | 26 ++---------- arch/powerpc/include/asm/nohash/64/pgtable.h | 2 - arch/powerpc/include/uapi/asm/mman.h | 2 +- arch/powerpc/kernel/dt_cpu_ftrs.c | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 2 - include/linux/mm.h | 2 - include/trace/events/mmflags.h | 2 - mm/ksm.c | 4 -- tools/testing/selftests/powerpc/mm/.gitignore | 1 - tools/testing/selftests/powerpc/mm/Makefile | 4 +- tools/testing/selftests/powerpc/mm/prot_sao.c | 42 ------------------- 14 files changed, 20 insertions(+), 92 deletions(-) delete mode 100644 tools/testing/selftests/powerpc/mm/prot_sao.c
arch/powerpc/include/asm/book3s/64/pgtable.h +5 -3
@@ -20,9 +20,13 @@#define _PAGE_RW (_PAGE_READ | _PAGE_WRITE)#define _PAGE_RWX (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC)#define _PAGE_PRIVILEGED 0x00008/* kernel access only */ -#define _PAGE_SAO 0x00010/* Strong access order */ + +#define _PAGE_CACHE_CTL 0x00030/* Bits for the folowing cache modes */ +/* No bits set is normal cacheable memory */ +/* 0x00010 unused, is SAO bit on radix POWER9 */ #define _PAGE_NON_IDEMPOTENT 0x00020/* non idempotent memory */ #define _PAGE_TOLERANT 0x00030/* tolerant memory, cache inhibited */ +#define _PAGE_DIRTY 0x00080/* C: page changed */ #define _PAGE_ACCESSED 0x00100/* R: page referenced */ /*
@@ -825,8 +829,6 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,return hash__set_pte_at (mm, addr, ptep, pte, percpu); } -#define _PAGE_CACHE_CTL (_PAGE_SAO | _PAGE_NON_IDEMPOTENT | _PAGE_TOLERANT) -#define pgprot_noncached pgprot_noncachedstatic inline pgprot_t pgprot_noncached (pgprot_t prot) {
arch/powerpc/include/asm/cputable.h +5 -5
@@ -191,7 +191,7 @@ static inline void cpu_feature_keys_init(void) { }#define CPU_FTR_SPURR LONG_ASM_CONST(0x0000000001000000)#define CPU_FTR_DSCR LONG_ASM_CONST(0x0000000002000000)#define CPU_FTR_VSX LONG_ASM_CONST(0x0000000004000000) -#define CPU_FTR_SAO LONG_ASM_CONST(0x0000000008000000) +// Free LONG_ASM_CONST(0x0000000008000000) #define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0000000010000000)#define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0000000020000000)#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0000000040000000)
@@ -435,7 +435,7 @@ static inline void cpu_feature_keys_init(void) { }CPU_FTR_MMCRA |CPU_FTR_SMT | \CPU_FTR_COHERENT_ICACHE | \CPU_FTR_PURR |CPU_FTR_SPURR |CPU_FTR_REAL_LE | \ -CPU_FTR_DSCR |CPU_FTR_SAO |CPU_FTR_ASYM_SMT | \ +CPU_FTR_DSCR |CPU_FTR_ASYM_SMT | \CPU_FTR_STCX_CHECKS_ADDRESS |CPU_FTR_POPCNTB |CPU_FTR_POPCNTD | \CPU_FTR_CFAR |CPU_FTR_HVMODE | \ CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX | CPU_FTR_PKEY)
@@ -444,7 +444,7 @@ static inline void cpu_feature_keys_init(void) { }CPU_FTR_MMCRA |CPU_FTR_SMT | \CPU_FTR_COHERENT_ICACHE | \CPU_FTR_PURR |CPU_FTR_SPURR |CPU_FTR_REAL_LE | \ -CPU_FTR_DSCR |CPU_FTR_SAO | \ +CPU_FTR_DSCR | \CPU_FTR_STCX_CHECKS_ADDRESS |CPU_FTR_POPCNTB |CPU_FTR_POPCNTD | \CPU_FTR_CFAR |CPU_FTR_HVMODE |CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
@@ -455,7 +455,7 @@ static inline void cpu_feature_keys_init(void) { }CPU_FTR_MMCRA |CPU_FTR_SMT | \CPU_FTR_COHERENT_ICACHE | \CPU_FTR_PURR |CPU_FTR_SPURR |CPU_FTR_REAL_LE | \ -CPU_FTR_DSCR |CPU_FTR_SAO | \ +CPU_FTR_DSCR | \CPU_FTR_STCX_CHECKS_ADDRESS |CPU_FTR_POPCNTB |CPU_FTR_POPCNTD | \CPU_FTR_CFAR |CPU_FTR_HVMODE |CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
@@ -473,7 +473,7 @@ static inline void cpu_feature_keys_init(void) { }CPU_FTR_MMCRA |CPU_FTR_SMT | \CPU_FTR_COHERENT_ICACHE | \CPU_FTR_PURR |CPU_FTR_SPURR |CPU_FTR_REAL_LE | \ -CPU_FTR_DSCR |CPU_FTR_SAO | \ +CPU_FTR_DSCR | \CPU_FTR_STCX_CHECKS_ADDRESS |CPU_FTR_POPCNTB |CPU_FTR_POPCNTD | \CPU_FTR_CFAR |CPU_FTR_HVMODE |CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
arch/powerpc/include/asm/kvm_book3s_64.h +3 -2
@@ -398,9 +398,10 @@ static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) {unsigned int wimg = hptel &HPTE_R_WIMG ; -/* Handle SAO */ +/* Handle SAO for POWER7,8,9 */ if (wimg = (HPTE_R_W |HPTE_R_I |HPTE_R_M ) && -cpu_has_feature (CPU_FTR_ARCH_206 )) +cpu_has_feature (CPU_FTR_ARCH_206 ) && + !cpu_has_feature (CPU_FTR_ARCH_31 )) wimg =HPTE_R_M ;if (!is_ci)
arch/powerpc/include/asm/mman.h +4 -22
@@ -13,38 +13,20 @@#include <linux/pkeys.h> #include <asm/cpu_has_feature.h> +#ifdef CONFIG_PPC_MEM_KEYS static inline unsigned long arch_calc_vm_prot_bits (unsigned long prot,unsigned long pkey) { -#ifdef CONFIG_PPC_MEM_KEYS -return (((prot &PROT_SAO ) ?VM_SAO :0 ) |pkey_to_vmflag_bits (pkey)); -#else -return ((prot &PROT_SAO ) ?VM_SAO :0 ); -#endif +return pkey_to_vmflag_bits (pkey); }#define arch_calc_vm_prot_bits (prot, pkey) arch_calc_vm_prot_bits(prot, pkey)static inline pgprot_t arch_vm_get_page_prot (unsigned long vm_flags) { -#ifdef CONFIG_PPC_MEM_KEYS -return (vm_flags &VM_SAO ) ? -__pgprot (_PAGE_SAO |vmflag_to_pte_pkey_bits (vm_flags)) : -__pgprot (0 |vmflag_to_pte_pkey_bits (vm_flags)); -#else -return (vm_flags &VM_SAO ) ?__pgprot (_PAGE_SAO) :__pgprot (0 ); -#endif +return __pgprot (vmflag_to_pte_pkey_bits (vm_flags)); }#define arch_vm_get_page_prot (vm_flags) arch_vm_get_page_prot(vm_flags) - -static inline bool arch_validate_prot (unsigned long prot,unsigned long addr) -{ -if (prot & ~(PROT_READ |PROT_WRITE |PROT_EXEC |PROT_SEM |PROT_SAO )) -return false; -if ((prot &PROT_SAO ) && !cpu_has_feature (CPU_FTR_SAO )) -return false; -return true; -} -#define arch_validate_prot arch_validate_prot +#endif #endif /* CONFIG_PPC64 */ #endif /* _ASM_POWERPC_MMAN_H */
arch/powerpc/include/asm/nohash/64/pgtable.h +0 -2
@@ -82,8 +82,6 @@*/ #include <asm/nohash/pte-book3e.h> -#define _PAGE_SAO 0 -#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1))/*
arch/powerpc/include/uapi/asm/mman.h +1 -1
@@ -11,7 +11,7 @@#include <asm-generic/mman-common.h> -#define PROT_SAO 0x10/* Strong Access Ordering */ +#define PROT_SAO 0x10/* Unsupported since v5.9 */ #define MAP_RENAME MAP_ANONYMOUS/* In SunOS terminology */ #define MAP_NORESERVE 0x40/* don't reserve swap pages */
arch/powerpc/kernel/dt_cpu_ftrs.c +1 -1
@@ -622,7 +622,7 @@ static struct dt_cpu_feature_match __initdata {"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL}, {"processor-utilization-of-resources-register", feat_enable_purr, 0}, {"no-execute", feat_enable, 0}, - {"strong-access-ordering", feat_enable, CPU_FTR_SAO}, +/* strong-access-ordering is unused */ {"cache-inhibited-large-page", feat_enable_large_ci, 0}, {"coprocessor-icswx", feat_enable, 0}, {"hypervisor-virtualization-interrupt", feat_enable_hvi, 0},
arch/powerpc/mm/book3s64/hash_utils.c +0 -2
@@ -232,8 +232,6 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags) rflags |=HPTE_R_I ; else if ((pteflags & _PAGE_CACHE_CTL) = _PAGE_NON_IDEMPOTENT) rflags |= (HPTE_R_I |HPTE_R_G ); - else if ((pteflags & _PAGE_CACHE_CTL) = _PAGE_SAO) - rflags |= (HPTE_R_W |HPTE_R_I |HPTE_R_M ); else/* * Add memory coherence if cache inhibited is not set
include/linux/mm.h +0 -2
@@ -317,8 +317,6 @@ extern unsigned int kobjsize(const void *objp);#if defined(CONFIG_X86 )# define VM_PAT VM_ARCH_1/* PAT reserves whole VMA at once (x86) */ -#elif defined(CONFIG_PPC ) -# define VM_SAO VM_ARCH_1/* Strong Access Ordering (powerpc) */ #elif defined(CONFIG_PARISC )# define VM_GROWSUP VM_ARCH_1#elif defined(CONFIG_IA64 )
include/trace/events/mmflags.h +0 -2
@@ -114,8 +114,6 @@ IF_HAVE_PG_IDLE(PG_idle, "idle" )#if defined(CONFIG_X86 )#define __VM_ARCH_SPECIFIC_1 {VM_PAT, "pat" } -#elif defined(CONFIG_PPC ) -#define __VM_ARCH_SPECIFIC_1 {VM_SAO, "sao" }#elif defined(CONFIG_PARISC ) || defined(CONFIG_IA64 )#define __VM_ARCH_SPECIFIC_1 {VM_GROWSUP, "growsup" }#elif !defined(CONFIG_MMU )
mm/ksm.c +0 -4
@@ -2452,10 +2452,6 @@ int ksm_madvise(struct vm_area_struct *vma, unsigned long start,if (vma_is_dax (vma))return 0 ; -#ifdef VM_SAO -if (*vm_flags &VM_SAO ) -return 0 ; -#endif #ifdef VM_SPARC_ADI if (*vm_flags &VM_SPARC_ADI )return 0 ;
tools/testing/selftests/powerpc/mm/.gitignore +0 -1
@@ -2,7 +2,6 @@ hugetlb_vs_thp_test subpage_prot tempfile -prot_sao segv_errors wild_bctr large_vm_fork_separation
tools/testing/selftests/powerpc/mm/Makefile +1 -3
@@ -2,7 +2,7 @@ noarg: $(MAKE) -C ../ -TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \ +TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot segv_errors wild_bctr \ large_vm_fork_separation bad_accesses TEST_GEN_PROGS_EXTENDED := tlbie_test TEST_GEN_FILES := tempfile
@@ -12,8 +12,6 @@ include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c -$(OUTPUT)/prot_sao: ../utils.c - $(OUTPUT)/wild_bctr: CFLAGS += -m64 $(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64 $(OUTPUT)/bad_accesses: CFLAGS += -m64
tools/testing/selftests/powerpc/mm/prot_sao.c deleted +0 -42
42 lines not on this page · raw message
Signature · 1 line
2.23.0
Re: [PATCH v2 2/3] powerpc/64s: remove PROT_SAO support
Quoted 8 lines · Nicholas Piggin
ISA v3.1 does not support the SAO storage control attribute required to implement
PROT_SAO.PROT_SAOwas used by specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so removal should not cause problems.We rather remove it than keep support for older processors, because live migrating guest partitions to newer processors may not be possible if SAO is in use (or worse allowed with silent races).
This is actually a real problem for KVM, because now we have the capabilities of the host affecting the characteristics of the guest virtual machine in a manner which userspace (e.g. QEMU) is unable to control.
It would probably be better to disallow SAO on all machines than have it available on some hosts and not others. (Yes I know there is a check on CPU_FTR_ARCH_206 in there, but that has been a no-op since we removed the PPC970 KVM support.)
Solving this properly will probably require creating a new KVM host capability and associated machine parameter in QEMU, along with a new machine type.
[snip]
Quoted 5 lines
arch/powerpc/include/asm/kvm_book3s_64.h +0
-0
arch/powerpc/include/asm/kvm_book3s_64.h static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) · line 405
Quoted 10 lines
arch/powerpc/include/asm/kvm_book3s_64.h +3
-2@@ -398,9 +398,10 @@ static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) {unsigned int wimg = hptel &HPTE_R_WIMG ; -/* Handle SAO */ +/* Handle SAO for POWER7,8,9 */ if (wimg = (HPTE_R_W |HPTE_R_I |HPTE_R_M ) && -cpu_has_feature (CPU_FTR_ARCH_206 )) +cpu_has_feature (CPU_FTR_ARCH_206 ) && + !cpu_has_feature (CPU_FTR_ARCH_31 )) wimg =HPTE_R_M ;
Paul.
Nicholas Piggin
reviewerRe: [PATCH v2 2/3] powerpc/64s: remove PROT_SAO support
Excerpts from Paul Mackerras's message of July 9, 2020 2:34 pm:
Quoted 15 lines · Nicholas Piggin
Quoted 8 lines
ISA v3.1 does not support the SAO storage control attribute required to implement
PROT_SAO.PROT_SAOwas used by specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so removal should not cause problems.We rather remove it than keep support for older processors, because live migrating guest partitions to newer processors may not be possible if SAO is in use (or worse allowed with silent races).
This is actually a real problem for KVM, because now we have the capabilities of the host affecting the characteristics of the guest virtual machine in a manner which userspace (e.g. QEMU) is unable to control.
Quoted 4 lines
It would probably be better to disallow SAO on all machines than have it available on some hosts and not others. (Yes I know there is a check on
CPU_FTR_ARCH_206in there, but that has been a no-op since we removed the PPC970 KVM support.)
This change doesn't change the SAO difference on the host processors though, just tries to slightly improve it from silently broken to maybe complaining a bit.
I didn't want to stop some very old image that uses this and is running okay on an existing host from working, but maybe the existence of such a thing would contradict my reasoning. But then if we don't care about it why care about this KVM behaviour difference at all?
Quoted 3 lines
Solving this properly will probably require creating a new KVM host capability and associated machine parameter in QEMU, along with a new machine type.
Rather than answer any of these questions, I might take the KVM change out and that can be dealt with separately from guest SAO removal.
Thanks,
Nick
Quoted 21 lines
[snip]
Quoted 5 lines
arch/powerpc/include/asm/kvm_book3s_64.h +0
-0arch/powerpc/include/asm/kvm_book3s_64.h static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) · line 405
Quoted 10 lines
arch/powerpc/include/asm/kvm_book3s_64.h +3
-2@@ -398,9 +398,10 @@ static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) {unsigned int wimg = hptel &HPTE_R_WIMG ; -/* Handle SAO */ +/* Handle SAO for POWER7,8,9 */ if (wimg == (HPTE_R_W |HPTE_R_I |HPTE_R_M ) && -cpu_has_feature (CPU_FTR_ARCH_206 )) +cpu_has_feature (CPU_FTR_ARCH_206 ) && + !cpu_has_feature (CPU_FTR_ARCH_31 )) wimg =HPTE_R_M ;Paul.
Re: [PATCH v2 2/3] powerpc/64s: remove PROT_SAO support
In reply to Nicholas PigginQuoted 4 lines
It would probably be better to disallow SAO on all machines than have it available on some hosts and not others. (Yes I know there is a check on
CPU_FTR_ARCH_206in there, but that has been a no-op since we removed the PPC970 KVM support.)
May I ask a very stupid question here -- is that meant to imply KVM cannot emulate a 970, or that KVM (at least HV, anyway) won't work on a 970?
Signature · 3 lines
------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * [email protected] -- This is an Honour System Virus. Please delete all your files. Thank you. ---
Re: [PATCH v2 2/3] powerpc/64s: remove PROT_SAO support
In reply to Nicholas PigginQuoted 7 lines · Cameron Kaiser
Quoted 4 lines
It would probably be better to disallow SAO on all machines than have it available on some hosts and not others. (Yes I know there is a check on
CPU_FTR_ARCH_206in there, but that has been a no-op since we removed the PPC970 KVM support.)May I ask a very stupid question here -- is that meant to imply KVM cannot emulate a 970, or that KVM (at least HV, anyway) won't work on a 970?
The PVR is able to be accessed from supervisor mode in the Power ISA, which means that a guest under KVM-HV always sees the real PVR of the CPU; it can't be spoofed by KVM. So for the first half of your question, about emulating a 970, the answer is "no" or at least "not completely". (KVM-PR can of course make the machine look like anything you want, pretty much, at the expense of lower performance.)
What I was referring to in my original message is that we used to be able to run KVM-HV on a PPC970 as a host, and we took that out. So the answer to the second half of your question is yes.
Paul.
Nicholas Piggin
reviewerPATCH v2 3/3 powerpc/64s/hash: disable subpage_prot syscall by default
In reply to Nicholas PigginThe subpage_prot syscall was added for specialised system software (Lx86) that has been discontinued for about 7 years, and is not thought to be used elsewhere, so disable it by default.
--- arch/powerpc/Kconfig | 7 +++++-- arch/powerpc/configs/powernv_defconfig | 1 - arch/powerpc/configs/pseries_defconfig | 1 - 3 files changed, 5 insertions(+), 4 deletions(-)
arch/powerpc/Kconfig +5 -2
@@ -833,13 +833,16 @@ config FORCE_MAX_ZONEORDER this in mind when choosing a value for this option. config PPC_SUBPAGE_PROT - bool "Support setting protections for 4k subpages" + bool "Support setting protections for 4k subpages (subpage_prot syscall)" + default n depends on PPC_BOOK3S_64 && PPC_64K_PAGES help - This option adds support for a system call to allow user programs + This option adds support for system call to allow user programs to set access permissions (read/write, readonly, or no access) on the 4k subpages of each 64k page. + If unsure, say N here. + config PPC_COPRO_BASE bool
arch/powerpc/configs/powernv_defconfig +0 -1
@@ -64,7 +64,6 @@ CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_PPC_64K_PAGES=y -CONFIG_PPC_SUBPAGE_PROT=y CONFIG_SCHED_SMT=y CONFIG_PM=y CONFIG_HOTPLUG_PCI=y
arch/powerpc/configs/pseries_defconfig +0 -1
@@ -57,7 +57,6 @@ CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_PPC_64K_PAGES=y -CONFIG_PPC_SUBPAGE_PROT=y CONFIG_SCHED_SMT=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_RPA=m
Signature · 1 line
2.23.0
Michael Ellerman
AppliedQuoted 6 lines · Nicholas Piggin
It was suggested that I post this to a wider audience on account of the change to supported userspace features in patch 2 particularly.
Thanks,
Nick
Quoted 6 lines
Nicholas Piggin (3):
powerpc: remove stalecalc_vm_prot_bitscomment powerpc/64s: removePROT_SAOsupport powerpc/64s/hash: disablesubpage_protsyscall by default[...]
Applied to powerpc/next.
[1/3] powerpc: Remove stale calc_vm_prot_bits() comment
https://git.kernel.org/powerpc/c/f4ac1774f2cba44994ce9ac0a65772e4656ac2df [2/3] powerpc/64s: Remove PROT_SAO support https://git.kernel.org/powerpc/c/5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05 [3/3] powerpc/64s/hash: Disable subpage_prot syscall by default https://git.kernel.org/powerpc/c/63396ada804c676e070bd1b8663046f18698ab27
cheers