imx8m: implement armv8_el2_to_aarch32
Subsystems (4)
PATCH 1/2 imx8m: implement armv8_el2_to_aarch32
From: Peng Fan <[email protected]>
Add iMX8M specific armv8_el2_to_aarch32 to let AArch64 mode U-Boot could boot aarch32 mode linux with FIT image as below:
/dts-v1/;
/ {
description = "Configuration to load ARM32 Linux";
images {
kernel at 1 {
description = "ARM32 Linux kernel";
data = /incbin/("./Image");
type = "kernel";
arch = "arm";
os = "linux";
compression = "none";
load = <0x40008000>;
entry = <0x40008000>;
hash at 1 {
algo = "md5";
};
};
fdt at 1 {
description = "Flattened Device Tree blob";
data = /incbin/("./imx8mm-evk.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x43000000>;
hash at 1 {
algo = "md5";
};
};
};
configurations {
default = "config at 1";
config at 1 {
description = "fsl-imx8mm-evk";
kernel = "kernel at 1";
fdt = "fdt at 1";
};
};
};Signed-off-by Peng Fan <[email protected]>
--- arch/arm/mach-imx/imx8m/lowlevel_init.S | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/mach-imx/imx8m/lowlevel_init.S +12 -0
@@ -60,3 +60,15 @@ restore_boot_params: ldr x0, [x0] mov sp, x0 ret + +.global armv8_el2_to_aarch32 +armv8_el2_to_aarch32: + cmp x0, #0 + bne 0f + mov x3, x2 + mov x2, x1 + mov x1, x4 + ldr x0, =0xc20000fd +0: + smc #0 + ret
Signature · 1 line
2.16.4
PATCH 2/2 imx8mm_evk: enlarge CONFIG_SYS_BOOTM_LEN
From: Peng Fan <[email protected]>
Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with kernel.
Signed-off-by Peng Fan <[email protected]>
--- include/configs/imx8mm_evk.h | 1 + 1 file changed, 1 insertion(+)
include/configs/imx8mm_evk.h +1 -0
@@ -10,6 +10,7 @@#include <linux/stringify.h> #include <asm/arch/imx-regs.h> +#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)#define CONFIG_SPL_MAX_SIZE (148 * 1024)#define CONFIG_SYS_MONITOR_LEN SZ_512K#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
Signature · 1 line
2.16.4