Initial MStar/Sigmastar ARMv7 SoC support
Subsystems (5)
v5 cover Initial MStar/Sigmastar ARMv7 SoC support
This patch set adds initial support for MStar/Sigmastar's Armv7 based SoCs. There is just enough here to get to a shell with an initramfs but support for a lot of the hardware is in progress and will follow.
MStar also shipped chips with MIPS cores and ARM9 etc which are incompatible so I've tried to make the distinction in the code that this is strictly for the Armv7 based chips.
Sorry for the spamming this. I just really want to make some progress on this because I'm worried the other bits that are needed for these SoCs (Really old AT91 support in macb and the fotg210 usb host) will be lost or stop working in the meantime. This already happened in u-boot.
Differences from v4:
1. Removed the crustx board from the MStar YAML that slipped in during rebasing. (I think that change is small enough that it doesn't affect Rob's Review-by but feel free to tell me off..)
2. Changed the comment for the SoC series in the MStar YAML to a description as requested by Rob Herring.
3. Added Acked-by and Reviewed-by tags from Rob Herring.
Differences from v3:
1. Fixed the issue with the mstar binding that Rob Herring's bot found.
2. Fixed the filename for the midrived08 dts.
Differences from v2:
1. With Marc Zyngier's help the GIC node has been filled out properly.
2. A comment was added to the arch timer node to explain why the clock-frequency is specified. Basically the vendor u-boot is old and broken.
3. Based on Arnd Bergmann's feedback the heavy memory barrier is now implemented using a DT node to specify where the registers are instead of hardcoding their location. A binding description has been added for the new node.
4. Expanded comments around the heavy memory barrier code so it's more obvious why it looks like it does.
5. The heavy memory barrier init code was folded into the machine init function.
6. Updated the device tree bindings and prefixes based on Andreas Färber's feedback. They have also been split out into a number of commits
7. Based on Andreas Färber's feedback I've added the "riu" (register interface unit) internal bus that contains all of the peripheral registers and the proper ranges for the soc node. This bus has clocks, interrupts and some configuration register so it might get it's own driver in the future.
8. I've dropped the pmu node for now as it's not needed to boot and I'm not sure of the relationship between the single core in most of the chips and the 4 documented interrupts.
9. Numerous cosmetic changes based on Andreas Färber's feedback.
Differences from v1:
1. v1 only really supported two specific chips that were known at the time of submitting that patch series. Since then it's become apparent that there are a few families of SoCs based on the same ARMv7 core, clk blocks, interrupt controllers etc and this v2 attempts to make support more generic so in the future more SoCs from this lineage can be added. Support for some other chips is already in progress and will follow.
2. v1 only added support for the BreadBee boards that I have been working on. v2 also adds support for a readily available car dash camera.
3. Support for the BreadBee board has been split into two top level dts to cleanly support if either the msc313 or msc313e is mounted on the board. The chips are pin compatible but some of the internal hardware is different. The u-boot port for these SoCs can detect which chip it is running on and select the right dts so the user doesn't have to care which chip is mounted on their board.
Daniel Palmer (12):
dt-bindings: vendor-prefixes: Add mstar vendor prefix
dt-bindings: vendor-prefixes: Add sstar vendor prefix
dt-bindings: vendor-prefixes: Add 70mai vendor prefix
dt-bindings: vendor-prefixes: Add thingy.jp prefix
dt-bindings: arm: Add mstar YAML schema
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add dts for 70mai midrive d08
.../devicetree/bindings/arm/mstar.yaml | 33 ++++++++ .../bindings/misc/mstar,l3bridge.yaml | 44 ++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 8 ++ MAINTAINERS | 11 +++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 4 + .../dts/infinity-msc313-breadbee_crust.dts | 25 ++++++ arch/arm/boot/dts/infinity-msc313.dtsi | 14 ++++ arch/arm/boot/dts/infinity.dtsi | 7 ++ .../boot/dts/infinity3-msc313e-breadbee.dts | 25 ++++++ arch/arm/boot/dts/infinity3-msc313e.dtsi | 14 ++++ arch/arm/boot/dts/infinity3.dtsi | 7 ++ .../boot/dts/mercury5-ssc8336n-midrived08.dts | 25 ++++++ arch/arm/boot/dts/mercury5-ssc8336n.dtsi | 14 ++++ arch/arm/boot/dts/mercury5.dtsi | 7 ++ arch/arm/boot/dts/mstar-v7.dtsi | 83 +++++++++++++++++++ arch/arm/mach-mstar/Kconfig | 26 ++++++ arch/arm/mach-mstar/Makefile | 1 + arch/arm/mach-mstar/mstarv7.c | 80 ++++++++++++++++++ 20 files changed, 431 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mstar.yaml create mode 100644 Documentation/devicetree/bindings/misc/mstar,l3bridge.yaml create mode 100644 arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts create mode 100644 arch/arm/boot/dts/infinity-msc313.dtsi create mode 100644 arch/arm/boot/dts/infinity.dtsi create mode 100644 arch/arm/boot/dts/infinity3-msc313e-breadbee.dts create mode 100644 arch/arm/boot/dts/infinity3-msc313e.dtsi create mode 100644 arch/arm/boot/dts/infinity3.dtsi create mode 100644 arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts create mode 100644 arch/arm/boot/dts/mercury5-ssc8336n.dtsi create mode 100644 arch/arm/boot/dts/mercury5.dtsi create mode 100644 arch/arm/boot/dts/mstar-v7.dtsi create mode 100644 arch/arm/mach-mstar/Kconfig create mode 100644 arch/arm/mach-mstar/Makefile create mode 100644 arch/arm/mach-mstar/mstarv7.c
Signature · 1 line
2.27.0
PATCH v5 1/12 dt-bindings: vendor-prefixes: Add mstar vendor prefix
Add prefix for MStar Semiconductor, Inc.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -680,6 +680,8 @@ patternProperties: description: Microsemi Corporation "^msi,.*": description: Micro-Star International Co. Ltd. + "^mstar,.*": + description: MStar Semiconductor, Inc. (acquired by MediaTek Inc.) "^mti,.*": description: Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) "^multi-inno,.*":
Signature · 1 line
2.27.0
PATCH v5 2/12 dt-bindings: vendor-prefixes: Add sstar vendor prefix
In reply to Daniel PalmerAdd prefix for Xiamen Xingchen Technology Co., Ltd
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -986,6 +986,8 @@ patternProperties: description: Spreadtrum Communications Inc. "^sst,.*": description: Silicon Storage Technology, Inc. + "^sstar,.*": + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics "^starry,.*":
Signature · 1 line
2.27.0
PATCH v5 3/12 dt-bindings: vendor-prefixes: Add 70mai vendor prefix
In reply to Daniel PalmerAdd prefix for 70mai Co., Ltd
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -23,6 +23,8 @@ patternProperties: "^(simple-audio-card|simple-graph-card|st-plgpio|st-spics|ts),.*": true # Keep list in alphabetical order. + "^70mai,.*": + description: 70mai Co., Ltd. "^abilis,.*": description: Abilis Systems "^abracon,.*":
Signature · 1 line
2.27.0
PATCH v5 4/12 dt-bindings: vendor-prefixes: Add thingy.jp prefix
In reply to Daniel PalmerAdd prefix for thingy.jp
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -1038,6 +1038,8 @@ patternProperties: description: Three Five Corp "^thine,.*": description: THine Electronics, Inc. + "^thingyjp,.*": + description: thingy.jp "^ti,.*": description: Texas Instruments "^tianma,.*":
Signature · 1 line
2.27.0
PATCH v5 5/12 dt-bindings: arm: Add mstar YAML schema
In reply to Daniel Palmer--- .../devicetree/bindings/arm/mstar.yaml | 33 +++++++++++++++++++ MAINTAINERS | 7 ++++ 2 files changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mstar.yaml
Documentation/devicetree/bindings/arm/mstar.yaml new file +33 -0
@@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mstar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar platforms device tree bindings + +maintainers: + - Daniel Palmer <[email protected]> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: infinity boards + items: + - enum: + - thingyjp,breadbee-crust # thingy.jp BreadBee Crust + - const: mstar,infinity + + - description: infinity3 boards + items: + - enum: + - thingyjp,breadbee # thingy.jp BreadBee + - const: mstar,infinity3 + + - description: mercury5 boards + items: + - enum: + - 70mai,midrived08 # 70mai midrive d08 + - const: mstar,mercury5
MAINTAINERS +7 -0
@@ -2117,6 +2117,13 @@ L: [email protected] (moderated for non-subscribers) S: Maintained F: arch/arm/mach-pxa/mioa701.c +ARM/MStar/Sigmastar Armv7 SoC support +M: Daniel Palmer <[email protected]> +L: [email protected] (moderated for non-subscribers) +S: Maintained +W: http://linux-chenxing.org/ +F: Documentation/devicetree/bindings/arm/mstar.yaml + ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT M: Michael Petchkovsky <[email protected]> S: Maintained
Signature · 1 line
2.27.0
PATCH v5 6/12 ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
In reply to Daniel PalmerInitial support for the MStar/Sigmastar Armv7 based IP camera and dashcam SoCs.
These chips are interesting in that they contain a Cortex-A7, peripherals and system memory in a single tiny QFN package that can be hand soldered allowing almost anyone to embed Linux in their projects.
--- MAINTAINERS | 1 + arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/mach-mstar/Kconfig | 26 ++++++++++++ arch/arm/mach-mstar/Makefile | 1 + arch/arm/mach-mstar/mstarv7.c | 80 +++++++++++++++++++++++++++++++++++ 6 files changed, 111 insertions(+) create mode 100644 arch/arm/mach-mstar/Kconfig create mode 100644 arch/arm/mach-mstar/Makefile create mode 100644 arch/arm/mach-mstar/mstarv7.c
MAINTAINERS +1 -0
@@ -2123,6 +2123,7 @@ L: [email protected] (moderated for non-subscribers) S: Maintained W: http://linux-chenxing.org/ F: Documentation/devicetree/bindings/arm/mstar.yaml +F: arch/arm/mach-mstar/ ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT M: Michael Petchkovsky <[email protected]>
arch/arm/Kconfig +2 -0
@@ -668,6 +668,8 @@ source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-moxart/Kconfig" +source "arch/arm/mach-mstar/Kconfig" + source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-mvebu/Kconfig"
arch/arm/Makefile +1 -0
@@ -197,6 +197,7 @@ machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut machine-$(CONFIG_ARCH_MXS) += mxs +machine-$(CONFIG_ARCH_MSTARV7) += mstar machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NSPIRE) += nspire
arch/arm/mach-mstar/Kconfig new file +26 -0
@@ -0,0 +1,26 @@ +menuconfig ARCH_MSTARV7 + bool "MStar/Sigmastar Armv7 SoC Support" + depends on ARCH_MULTI_V7 + select ARM_GIC + select ARM_HEAVY_MB + help + Support for newer MStar/Sigmastar SoC families that are + based on Armv7 cores like the Cortex A7 and share the same + basic hardware like the infinity and mercury series. + +if ARCH_MSTARV7 + +config MACH_INFINITY + bool "MStar/Sigmastar infinity SoC support" + default ARCH_MSTARV7 + help + Support for MStar/Sigmastar infinity IP camera SoCs. + +config MACH_MERCURY + bool "MStar/Sigmastar mercury SoC support" + default ARCH_MSTARV7 + help + Support for MStar/Sigmastar mercury dash camera SoCs. + Note that older Mercury2 SoCs are ARM9 based and not supported. + +endif
arch/arm/mach-mstar/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_MSTARV7) += mstarv7.o
arch/arm/mach-mstar/mstarv7.c new file +80 -0
80 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH v5 7/12 ARM: mstar: Add binding details for mstar,l3bridge
In reply to Daniel PalmerThis adds a YAML description of the l3bridge node needed by the platform code for the MStar/SigmaStar Armv7 SoCs.
--- .../bindings/misc/mstar,l3bridge.yaml | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/mstar,l3bridge.yaml
Documentation/devicetree/bindings/misc/mstar,l3bridge.yaml new file +44 -0
@@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 thingy.jp. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/mstar,l3bridge.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MStar/SigmaStar Armv7 SoC l3bridge + +maintainers: + - Daniel Palmer <[email protected]> + +description: | + MStar/SigmaStar's Armv7 SoCs have a pipeline in the interface + between the CPU and memory. This means that before DMA capable + devices are allowed to run the pipeline must be flushed to ensure + everything is in memory. + + The l3bridge region contains registers that allow such a flush + to be triggered. + + This node is used by the platform code to find where the registers + are and install a barrier that triggers the required pipeline flush. + +properties: + compatible: + items: + - const: mstar,l3bridge + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + l3bridge: l3bridge@1f204400 { + compatible = "mstar,l3bridge"; + reg = <0x1f204400 0x200>; + };
Signature · 1 line
2.27.0
PATCH v5 8/12 ARM: mstar: Add Armv7 base dtsi
In reply to Daniel PalmerAdds initial dtsi for the base MStar/Sigmastar Armv7 SoCs.
These SoCs have very similar memory maps and this will avoid duplicating nodes across multiple dtsis.
--- MAINTAINERS | 1 + arch/arm/boot/dts/mstar-v7.dtsi | 83 +++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+) create mode 100644 arch/arm/boot/dts/mstar-v7.dtsi
MAINTAINERS +1 -0
@@ -2123,6 +2123,7 @@ L: [email protected] (moderated for non-subscribers) S: Maintained W: http://linux-chenxing.org/ F: Documentation/devicetree/bindings/arm/mstar.yaml +F: arch/arm/boot/dts/mstar-v7.dtsi F: arch/arm/mach-mstar/ ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
arch/arm/boot/dts/mstar-v7.dtsi new file +83 -0
83 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH v5 9/12 ARM: mstar: Add infinity/infinity3 family dtsis
In reply to Daniel PalmerThis adds two family level dtsis for the infinity and infinity3 and then adds a chip level dtsi each for a chip in those families.
infinity3.dtsi includes infinity.dtsi as these SoCs share most of their memory map and we would have a lot of duplication otherwise.
--- MAINTAINERS | 1 + arch/arm/boot/dts/infinity-msc313.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/infinity.dtsi | 7 +++++++ arch/arm/boot/dts/infinity3-msc313e.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/infinity3.dtsi | 7 +++++++ 5 files changed, 43 insertions(+) create mode 100644 arch/arm/boot/dts/infinity-msc313.dtsi create mode 100644 arch/arm/boot/dts/infinity.dtsi create mode 100644 arch/arm/boot/dts/infinity3-msc313e.dtsi create mode 100644 arch/arm/boot/dts/infinity3.dtsi
MAINTAINERS +1 -0
@@ -2123,6 +2123,7 @@ L: [email protected] (moderated for non-subscribers) S: Maintained W: http://linux-chenxing.org/ F: Documentation/devicetree/bindings/arm/mstar.yaml +F: arch/arm/boot/dts/infinity*.dtsi F: arch/arm/boot/dts/mstar-v7.dtsi F: arch/arm/mach-mstar/
arch/arm/boot/dts/infinity-msc313.dtsi new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "infinity.dtsi" + +/ { + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x4000000>; + }; +};
arch/arm/boot/dts/infinity.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "mstar-v7.dtsi"
arch/arm/boot/dts/infinity3-msc313e.dtsi new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "infinity3.dtsi" + +/ { + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x4000000>; + }; +};
arch/arm/boot/dts/infinity3.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "infinity.dtsi"
Signature · 1 line
2.27.0
PATCH v5 10/12 ARM: mstar: Add mercury5 series dtsis
In reply to Daniel PalmerThis adds a family level dtsi for the mercury5 and then a chip level dtsi for the ssc8336n chip.
--- MAINTAINERS | 1 + arch/arm/boot/dts/mercury5-ssc8336n.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/mercury5.dtsi | 7 +++++++ 3 files changed, 22 insertions(+) create mode 100644 arch/arm/boot/dts/mercury5-ssc8336n.dtsi create mode 100644 arch/arm/boot/dts/mercury5.dtsi
MAINTAINERS +1 -0
@@ -2124,6 +2124,7 @@ S: Maintained W: http://linux-chenxing.org/ F: Documentation/devicetree/bindings/arm/mstar.yaml F: arch/arm/boot/dts/infinity*.dtsi +F: arch/arm/boot/dts/mercury*.dtsi F: arch/arm/boot/dts/mstar-v7.dtsi F: arch/arm/mach-mstar/
arch/arm/boot/dts/mercury5-ssc8336n.dtsi new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "mercury5.dtsi" + +/ { + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x4000000>; + }; +};
arch/arm/boot/dts/mercury5.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +#include "mstar-v7.dtsi"
Signature · 1 line
2.27.0
PATCH v5 11/12 ARM: mstar: Add dts for msc313(e) based BreadBee boards
In reply to Daniel PalmerBreadBee is an opensource development board based on the MStar msc313(e) SoC.
Hardware details, schematics and so on can be found at:
https://github.com/breadbee/breadbee
--- arch/arm/boot/dts/Makefile | 3 +++ .../dts/infinity-msc313-breadbee_crust.dts | 25 +++++++++++++++++++ .../boot/dts/infinity3-msc313e-breadbee.dts | 25 +++++++++++++++++++ 3 files changed, 53 insertions(+) create mode 100644 arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts create mode 100644 arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
arch/arm/boot/dts/Makefile +3 -0
@@ -1342,6 +1342,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb +dtb-$(CONFIG_ARCH_MSTARV7) += \ + infinity-msc313-breadbee_crust.dtb \ + infinity3-msc313e-breadbee.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \
arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +/dts-v1/; +#include "infinity-msc313.dtsi" + +/ { + model = "BreadBee Crust"; + compatible = "thingyjp,breadbee-crust", "mstar,infinity"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +};
arch/arm/boot/dts/infinity3-msc313e-breadbee.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +/dts-v1/; +#include "infinity3-msc313e.dtsi" + +/ { + model = "BreadBee"; + compatible = "thingyjp,breadbee", "mstar,infinity3"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +};
Signature · 1 line
2.27.0
PATCH v5 12/12 ARM: mstar: Add dts for 70mai midrive d08
In reply to Daniel PalmerAdds initial support for the 70mai midrive d08 dash camera.
--- arch/arm/boot/dts/Makefile | 3 ++- .../boot/dts/mercury5-ssc8336n-midrived08.dts | 25 +++++++++++++++++++ 2 files changed, 27 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
arch/arm/boot/dts/Makefile +2 -1
@@ -1344,7 +1344,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ infinity-msc313-breadbee_crust.dtb \ - infinity3-msc313e-breadbee.dtb + infinity3-msc313e-breadbee.dtb \ + mercury5-ssc8336n-midrive08.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \
arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <[email protected]> + */ + +/dts-v1/; +#include "mercury5-ssc8336n.dtsi" + +/ { + model = "70mai Midrive D08"; + compatible = "70mai,midrived08", "mstar,mercury5"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +};
Signature · 1 line
2.27.0
Arnd Bergmann
maintainerQuoted 10 lines · Daniel Palmer
This patch set adds initial support for MStar/Sigmastar's Armv7 based SoCs. There is just enough here to get to a shell with an initramfs but support for a lot of the hardware is in progress and will follow.
MStar also shipped chips with MIPS cores and ARM9 etc which are incompatible so I've tried to make the distinction in the code that this is strictly for the Armv7 based chips.
Quoted 5 lines
Sorry for the spamming this. I just really want to make some progress on this because I'm worried the other bits that are needed for these SoCs (Really old AT91 support in macb and the fotg210 usb host) will be lost or stop working in the meantime. This already happened in u-boot.
Hi Daniel,
I just found the series again after looking through some backlog, and noticing I missed your submission from July 10. This looks all good to me now, so I've merged the series into the arm/newsoc branch that already contains added support for the keembay and sparx5 SoCs.
If you require any changes to this, please send incremental patches against the soc tree, and submit it to [email protected] so it makes it gets into patchwork.
Arnd
Hi Arnd,
Thanks.
There is one small fix for the v5 set. One of the DTS file names got broken when I rebased on a different machine.
I'll send a patch for that later today.
Cheer,
Daniel
Quoted 31 lines · Arnd Bergmann
Quoted 10 lines · Daniel Palmer
This patch set adds initial support for MStar/Sigmastar's Armv7 based SoCs. There is just enough here to get to a shell with an initramfs but support for a lot of the hardware is in progress and will follow.
MStar also shipped chips with MIPS cores and ARM9 etc which are incompatible so I've tried to make the distinction in the code that this is strictly for the Armv7 based chips.
Quoted 5 lines
Sorry for the spamming this. I just really want to make some progress on this because I'm worried the other bits that are needed for these SoCs (Really old AT91 support in macb and the fotg210 usb host) will be lost or stop working in the meantime. This already happened in u-boot.
Hi Daniel,
I just found the series again after looking through some backlog, and noticing I missed your submission from July 10. This looks all good to me now, so I've merged the series into the arm/newsoc branch that already contains added support for the keembay and sparx5 SoCs.
If you require any changes to this, please send incremental patches against the soc tree, and submit it to [email protected] so it makes it gets into patchwork.
Arnd