Skip to contentSkip to conversation

fix swiotlb-xen for RPi4

PATCH In review Stefano Stabellini 2 participants 17 messages Jul 10, 2020 – Aug 4, 2020

Subsystems (4)
lore
Share & tools
lore

Stefano Stabellini

author maintainer
#0 lore raw

v3 cover fix swiotlb-xen for RPi4

Hi all,

This series is a collection of fixes to get Linux running on the RPi4 as dom0. Conceptually there are only two significant changes:

- make sure not to call virt_to_page on vmalloc virt addresses (patch #1)
- use phys_to_dma and dma_to_phys to translate phys to/from dma addresses (all other patches)

I addressed all comments by Christoph to v2 of the series except from the one about merging the precursor "add struct device *" patches. I can always merge them together at any time as needed.

Boris gave his Reviewed-by to the whole series v2. I added his Reviewed-by to all patches, including the ones with small cosmetic fixes, except for patch #8 #9 #10 because they are either new or changed significantly in this version of the series.

I retained Roman and Corey's Tested-by.

Cheers,

Stefano

git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen.git fix-rpi4-v3

Boris Ostrovsky (1):
swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses

Stefano Stabellini (10):
swiotlb-xen: remove start_dma_addr
swiotlb-xen: add struct device * parameter to xen_phys_to_bus
swiotlb-xen: add struct device * parameter to xen_bus_to_phys
swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu
swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device
swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer
swiotlb-xen: remove XEN_PFN_PHYS
swiotlb-xen: introduce phys_to_dma/dma_to_phys translations xen/arm: introduce phys/dma translations in xen_dma_sync_for_* xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint

 arch/arm/xen/mm.c         |  34 +++++++++++++++----------------
 drivers/xen/swiotlb-xen.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------
 include/xen/page.h        |   1 -
 include/xen/swiotlb-xen.h |   8 ++++----
 4 files changed, 93 insertions(+), 69 deletions(-)
author maintainer
#1 lore raw

PATCH v3 1/11 swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses

From: Boris Ostrovsky <[email protected]>

xen_alloc_coherent_pages might return pages for which virt_to_phys and virt_to_page don't work, e.g. ioremap'ed pages.

So in xen_swiotlb_free_coherent we can't assume that virt_to_page works. Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc virt addresses.

This patch fixes the following crash at boot on RPi4 (the underlying issue is not RPi4 specific):
https://marc.info/?l=xen-devel&m=158862573216800

---
Changes in v3:
- style improvements

Changes in v2:
- update commit message

---
 drivers/xen/swiotlb-xen.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/xen/swiotlb-xen.c +7 -1
index b6d27762c6f8..5fbadd07819b 100644
@@ -335,6 +335,7 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	int order = get_order(size);
 	phys_addr_t phys;
 	u64 dma_mask = DMA_BIT_MASK(32);
+	struct page *page;
 
 	if (hwdev && hwdev->coherent_dma_mask)
 		dma_mask = hwdev->coherent_dma_mask;
@@ -346,9 +347,14 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	/* Convert the size to actually allocated. */
 	size = 1UL << (order + XEN_PAGE_SHIFT);
 
+	if (is_vmalloc_addr(vaddr))
+		page = vmalloc_to_page(vaddr);
+	else
+		page = virt_to_page(vaddr);
+
 	if (!WARN_ON((dev_addr + size - 1 > dma_mask) ||
 		     range_straddles_page_boundary(phys, size)) &&
-	    TestClearPageXenRemapped(virt_to_page(vaddr)))
+	    TestClearPageXenRemapped(page))
 		xen_destroy_contiguous_region(phys, order);
 
 	xen_free_coherent_pages(hwdev, size, vaddr, (dma_addr_t)phys, attrs);
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH v3 2/11 swiotlb-xen: remove start_dma_addr

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

It is not strictly needed. Call virt_to_phys on xen_io_tlb_start instead. It will be useful not to have a start_dma_addr around with the next patches.

Note that virt_to_phys is not the same as xen_virt_to_bus but actually it is used to compared again __pa(xen_io_tlb_start) as passed to swiotlb_init_with_tbl, so virt_to_phys is actually what we want.

---
Changes in v2:
- update commit message

---
 drivers/xen/swiotlb-xen.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/xen/swiotlb-xen.c +2 -5
index 5fbadd07819b..89a775948a02 100644
@@ -52,8 +52,6 @@ static unsigned long xen_io_tlb_nslabs;
  * Quick lookup value of the bus address of the IOTLB.
  */
 
-static u64 start_dma_addr;
-
 /*
  * Both of these functions should avoid XEN_PFN_PHYS because phys_addr_t
  * can be 32bit when dma_addr_t is 64bit leading to a loss in
@@ -241,7 +239,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
 		m_ret = XEN_SWIOTLB_EFIXUP;
 		goto error;
 	}
-	start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
 	if (early) {
 		if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
 			 verbose))
@@ -392,8 +389,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
-	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys,
-				     size, size, dir, attrs);
+	map = swiotlb_tbl_map_single(dev, virt_to_phys(xen_io_tlb_start),
+				     phys, size, size, dir, attrs);
 	if (map == (phys_addr_t)DMA_MAPPING_ERROR)
 		return DMA_MAPPING_ERROR;
 
Signature · 1 line
2.17.1
author maintainer
#3 lore raw

PATCH v3 3/11 swiotlb-xen: add struct device * parameter to xen_phys_to_bus

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

No functional changes. The parameter is unused in this patch but will be used by next patches.

---
Changes in v3:
- add whitespace in title
- improve commit message

---
 drivers/xen/swiotlb-xen.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/xen/swiotlb-xen.c +7 -7
index 89a775948a02..dbe710a59bf2 100644
@@ -57,7 +57,7 @@ static unsigned long xen_io_tlb_nslabs;
  * can be 32bit when dma_addr_t is 64bit leading to a loss in
  * information if the shift is done before casting to 64bit.
  */
-static inline dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
+static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
 {
 	unsigned long bfn = pfn_to_bfn(XEN_PFN_DOWN(paddr));
 	dma_addr_t dma = (dma_addr_t)bfn << XEN_PAGE_SHIFT;
@@ -78,9 +78,9 @@ static inline phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
 	return paddr;
 }
 
-static inline dma_addr_t xen_virt_to_bus(void *address)
+static inline dma_addr_t xen_virt_to_bus(struct device *dev, void *address)
 {
-	return xen_phys_to_bus(virt_to_phys(address));
+	return xen_phys_to_bus(dev, virt_to_phys(address));
 }
 
 static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
@@ -309,7 +309,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	 * Do not use virt_to_phys(ret) because on ARM it doesn't correspond
 	 * to *dma_handle. */
 	phys = *dma_handle;
-	dev_addr = xen_phys_to_bus(phys);
+	dev_addr = xen_phys_to_bus(hwdev, phys);
 	if (((dev_addr + size - 1 <= dma_mask)) &&
 	    !range_straddles_page_boundary(phys, size))
 		*dma_handle = dev_addr;
@@ -370,7 +370,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 				unsigned long attrs)
 {
 	phys_addr_t map, phys = page_to_phys(page) + offset;
-	dma_addr_t dev_addr = xen_phys_to_bus(phys);
+	dma_addr_t dev_addr = xen_phys_to_bus(dev, phys);
 
 	BUG_ON(dir == DMA_NONE);
 	/*
@@ -395,7 +395,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 		return DMA_MAPPING_ERROR;
 
 	phys = map;
-	dev_addr = xen_phys_to_bus(map);
+	dev_addr = xen_phys_to_bus(dev, map);
 
 	/*
 	 * Ensure that the address returned is DMA'ble
@@ -539,7 +539,7 @@ xen_swiotlb_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,
 static int
 xen_swiotlb_dma_supported(struct device *hwdev, u64 mask)
 {
-	return xen_virt_to_bus(xen_io_tlb_end - 1) <= mask;
+	return xen_virt_to_bus(hwdev, xen_io_tlb_end - 1) <= mask;
 }
 
 const struct dma_map_ops xen_swiotlb_dma_ops = {
Signature · 1 line
2.17.1
author maintainer
#4 lore raw

PATCH v3 4/11 swiotlb-xen: add struct device * parameter to xen_bus_to_phys

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

No functional changes. The parameter is unused in this patch but will be used by next patches.

---
Changes in v3:
- add whitespace in title
- improve commit message

---
 drivers/xen/swiotlb-xen.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/xen/swiotlb-xen.c +5 -5
index dbe710a59bf2..a8e447137faf 100644
@@ -67,7 +67,7 @@ static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
 	return dma;
 }
 
-static inline phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
+static inline phys_addr_t xen_bus_to_phys(struct device *dev, dma_addr_t baddr)
 {
 	unsigned long xen_pfn = bfn_to_pfn(XEN_PFN_DOWN(baddr));
 	dma_addr_t dma = (dma_addr_t)xen_pfn << XEN_PAGE_SHIFT;
@@ -339,7 +339,7 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 
 	/* do not use virt_to_phys because on ARM it doesn't return you the
 	 * physical address */
-	phys = xen_bus_to_phys(dev_addr);
+	phys = xen_bus_to_phys(hwdev, dev_addr);
 
 	/* Convert the size to actually allocated. */
 	size = 1UL << (order + XEN_PAGE_SHIFT);
@@ -423,7 +423,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
-	phys_addr_t paddr = xen_bus_to_phys(dev_addr);
+	phys_addr_t paddr = xen_bus_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
@@ -439,7 +439,7 @@ static void
 xen_swiotlb_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction dir)
 {
-	phys_addr_t paddr = xen_bus_to_phys(dma_addr);
+	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
 
 	if (!dev_is_dma_coherent(dev))
 		xen_dma_sync_for_cpu(dma_addr, paddr, size, dir);
@@ -452,7 +452,7 @@ static void
 xen_swiotlb_sync_single_for_device(struct device *dev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction dir)
 {
-	phys_addr_t paddr = xen_bus_to_phys(dma_addr);
+	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
 
 	if (is_xen_swiotlb_buffer(dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_DEVICE);
Signature · 1 line
2.17.1
author maintainer
#5 lore raw

PATCH v3 5/11 swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

No functional changes. The parameter is unused in this patch but will be used by next patches.

---
Changes in v3:
- add whitespace in title
- improve commit message

---
 arch/arm/xen/mm.c         | 5 +++--
 drivers/xen/swiotlb-xen.c | 4 ++--
 include/xen/swiotlb-xen.h | 5 +++--
 3 files changed, 8 insertions(+), 6 deletions(-)
arch/arm/xen/mm.c +3 -2
index d40e9e5fc52b..1a00e8003c64 100644
@@ -71,8 +71,9 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op)
  * pfn_valid returns true the pages is local and we can use the native
  * dma-direct functions, otherwise we call the Xen specific version.
  */
-void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
+void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
+			  phys_addr_t paddr, size_t size,
+			  enum dma_data_direction dir)
 {
 	if (pfn_valid(PFN_DOWN(handle)))
 		arch_sync_dma_for_cpu(paddr, size, dir);
drivers/xen/swiotlb-xen.c +2 -2
index a8e447137faf..d04b7a15124f 100644
@@ -428,7 +428,7 @@ static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 	BUG_ON(dir == DMA_NONE);
 
 	if (!dev_is_dma_coherent(hwdev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xen_dma_sync_for_cpu(dev_addr, paddr, size, dir);
+		xen_dma_sync_for_cpu(hwdev, dev_addr, paddr, size, dir);
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(dev_addr))
@@ -442,7 +442,7 @@ xen_swiotlb_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr,
 	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
 
 	if (!dev_is_dma_coherent(dev))
-		xen_dma_sync_for_cpu(dma_addr, paddr, size, dir);
+		xen_dma_sync_for_cpu(dev, dma_addr, paddr, size, dir);
 
 	if (is_xen_swiotlb_buffer(dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_CPU);
include/xen/swiotlb-xen.h +3 -2
index ffc0d3902b71..f62d1854780b 100644
@@ -4,8 +4,9 @@
 
 #include <linux/swiotlb.h>
 
-void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir);
+void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
+			  phys_addr_t paddr, size_t size,
+			  enum dma_data_direction dir);
 void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size,
 		enum dma_data_direction dir);
 
Signature · 1 line
2.17.1
author maintainer
#6 lore raw

PATCH v3 6/11 swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

No functional changes. The parameter is unused in this patch but will be used by next patches.

---
Changes in v3:
- add whitespace in title
- improve commit message

---
 arch/arm/xen/mm.c         | 5 +++--
 drivers/xen/swiotlb-xen.c | 4 ++--
 include/xen/swiotlb-xen.h | 5 +++--
 3 files changed, 8 insertions(+), 6 deletions(-)
arch/arm/xen/mm.c +3 -2
index 1a00e8003c64..f2414ea40a79 100644
@@ -81,8 +81,9 @@ void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
 }
 
-void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
+void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
+			     phys_addr_t paddr, size_t size,
+			     enum dma_data_direction dir)
 {
 	if (pfn_valid(PFN_DOWN(handle)))
 		arch_sync_dma_for_device(paddr, size, dir);
drivers/xen/swiotlb-xen.c +2 -2
index d04b7a15124f..8a3a7bcc5ec0 100644
@@ -408,7 +408,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 
 done:
 	if (!dev_is_dma_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xen_dma_sync_for_device(dev_addr, phys, size, dir);
+		xen_dma_sync_for_device(dev, dev_addr, phys, size, dir);
 	return dev_addr;
 }
 
@@ -458,7 +458,7 @@ xen_swiotlb_sync_single_for_device(struct device *dev, dma_addr_t dma_addr,
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_DEVICE);
 
 	if (!dev_is_dma_coherent(dev))
-		xen_dma_sync_for_device(dma_addr, paddr, size, dir);
+		xen_dma_sync_for_device(dev, dma_addr, paddr, size, dir);
 }
 
 /*
include/xen/swiotlb-xen.h +3 -2
index f62d1854780b..6d235fe2b92d 100644
@@ -7,8 +7,9 @@
 void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
 			  phys_addr_t paddr, size_t size,
 			  enum dma_data_direction dir);
-void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir);
+void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
+			     phys_addr_t paddr, size_t size,
+			     enum dma_data_direction dir);
 
 extern int xen_swiotlb_init(int verbose, bool early);
 extern const struct dma_map_ops xen_swiotlb_dma_ops;
Signature · 1 line
2.17.1
author maintainer
#7 lore raw

PATCH v3 7/11 swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

No functional changes. The parameter is unused in this patch but will be used by next patches.

---
Changes in v3:
- add whitespace in title
- improve commit message

---
 drivers/xen/swiotlb-xen.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/xen/swiotlb-xen.c +4 -4
index 8a3a7bcc5ec0..e2c35f45f91e 100644
@@ -97,7 +97,7 @@ static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
 	return 0;
 }
 
-static int is_xen_swiotlb_buffer(dma_addr_t dma_addr)
+static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
 {
 	unsigned long bfn = XEN_PFN_DOWN(dma_addr);
 	unsigned long xen_pfn = bfn_to_local_pfn(bfn);
@@ -431,7 +431,7 @@ static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 		xen_dma_sync_for_cpu(hwdev, dev_addr, paddr, size, dir);
 
 	/* NOTE: We use dev_addr here, not paddr! */
-	if (is_xen_swiotlb_buffer(dev_addr))
+	if (is_xen_swiotlb_buffer(hwdev, dev_addr))
 		swiotlb_tbl_unmap_single(hwdev, paddr, size, size, dir, attrs);
 }
 
@@ -444,7 +444,7 @@ xen_swiotlb_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr,
 	if (!dev_is_dma_coherent(dev))
 		xen_dma_sync_for_cpu(dev, dma_addr, paddr, size, dir);
 
-	if (is_xen_swiotlb_buffer(dma_addr))
+	if (is_xen_swiotlb_buffer(dev, dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_CPU);
 }
 
@@ -454,7 +454,7 @@ xen_swiotlb_sync_single_for_device(struct device *dev, dma_addr_t dma_addr,
 {
 	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
 
-	if (is_xen_swiotlb_buffer(dma_addr))
+	if (is_xen_swiotlb_buffer(dev, dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_DEVICE);
 
 	if (!dev_is_dma_coherent(dev))
Signature · 1 line
2.17.1
author maintainer
#8 lore raw

PATCH v3 8/11 swiotlb-xen: remove XEN_PFN_PHYS

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more complex than need to be.

Remove the definition of XEN_PFN_PHYS and open code the cast in the one place where it is needed.

---
 drivers/xen/swiotlb-xen.c | 7 +------
 include/xen/page.h        | 1 -
 2 files changed, 1 insertion(+), 7 deletions(-)
drivers/xen/swiotlb-xen.c +1 -6
index e2c35f45f91e..03d118b6c141 100644
@@ -52,11 +52,6 @@ static unsigned long xen_io_tlb_nslabs;
  * Quick lookup value of the bus address of the IOTLB.
  */
 
-/*
- * Both of these functions should avoid XEN_PFN_PHYS because phys_addr_t
- * can be 32bit when dma_addr_t is 64bit leading to a loss in
- * information if the shift is done before casting to 64bit.
- */
 static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
 {
 	unsigned long bfn = pfn_to_bfn(XEN_PFN_DOWN(paddr));
@@ -101,7 +96,7 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
 {
 	unsigned long bfn = XEN_PFN_DOWN(dma_addr);
 	unsigned long xen_pfn = bfn_to_local_pfn(bfn);
-	phys_addr_t paddr = XEN_PFN_PHYS(xen_pfn);
+	phys_addr_t paddr = (phys_addr_t)xen_pfn << XEN_PAGE_SHIFT;
 
 	/* If the address is outside our domain, it CAN
 	 * have the same virtual address as another address
include/xen/page.h +0 -1
index df6d6b6ec66e..285677b42943 100644
@@ -24,7 +24,6 @@
 
 #define XEN_PFN_DOWN(x)	((x) >> XEN_PAGE_SHIFT)
 #define XEN_PFN_UP(x)	(((x) + XEN_PAGE_SIZE-1) >> XEN_PAGE_SHIFT)
-#define XEN_PFN_PHYS(x)	((phys_addr_t)(x) << XEN_PAGE_SHIFT)
 
 #include <asm/xen/page.h>
 
Signature · 1 line
2.17.1
maintainer Reviewed-by on v3 8/11
#9 lore raw

Re: [PATCH v3 08/11] swiotlb-xen: remove XEN_PFN_PHYS

Quoted 9 lines · Stefano Stabellini

From: Stefano Stabellini <[email protected]>

XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more complex than need to be.

Remove the definition of XEN_PFN_PHYS and open code the cast in the one place where it is needed.

Juergen

author maintainer
#10 lore raw

PATCH v3 9/11 swiotlb-xen: introduce phys_to_dma/dma_to_phys translations

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

With some devices physical addresses are different than dma addresses. To be able to deal with these cases, we need to call phys_to_dma on physical addresses (including machine addresses in Xen terminology) before returning them from xen_swiotlb_alloc_coherent and xen_swiotlb_map_page.

We also need to convert dma addresses back to physical addresses using dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if we want to do any operations on them.

Call dma_to_phys in is_xen_swiotlb_buffer.
Introduce xen_phys_to_dma and call phys_to_dma in its implementation. Introduce xen_dma_to_phys and call dma_to_phys in its implementation. Call xen_phys_to_dma/xen_dma_to_phys instead of xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c.

Everything is taken care of by these changes except for xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a few explicit phys_to_dma/dma_to_phys calls.

---
Changes in v2:
- improve commit message

Changes in v3:
- add xen_phys_to_dma and xen_dma_to_phys in this patch

---
 drivers/xen/swiotlb-xen.c | 53 +++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 21 deletions(-)
drivers/xen/swiotlb-xen.c +32 -21
index 03d118b6c141..a6a95358a8cb 100644
@@ -52,30 +52,39 @@ static unsigned long xen_io_tlb_nslabs;
  * Quick lookup value of the bus address of the IOTLB.
  */
 
-static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
+static inline phys_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
 {
 	unsigned long bfn = pfn_to_bfn(XEN_PFN_DOWN(paddr));
-	dma_addr_t dma = (dma_addr_t)bfn << XEN_PAGE_SHIFT;
+	phys_addr_t baddr = (phys_addr_t)bfn << XEN_PAGE_SHIFT;
 
-	dma |= paddr & ~XEN_PAGE_MASK;
+	baddr |= paddr & ~XEN_PAGE_MASK;
+	return baddr;
+}
 
-	return dma;
+static inline dma_addr_t xen_phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return phys_to_dma(dev, xen_phys_to_bus(dev, paddr));
 }
 
-static inline phys_addr_t xen_bus_to_phys(struct device *dev, dma_addr_t baddr)
+static inline phys_addr_t xen_bus_to_phys(struct device *dev,
+					  phys_addr_t baddr)
 {
 	unsigned long xen_pfn = bfn_to_pfn(XEN_PFN_DOWN(baddr));
-	dma_addr_t dma = (dma_addr_t)xen_pfn << XEN_PAGE_SHIFT;
-	phys_addr_t paddr = dma;
-
-	paddr |= baddr & ~XEN_PAGE_MASK;
+	phys_addr_t paddr = (xen_pfn << XEN_PAGE_SHIFT) |
+			    (baddr & ~XEN_PAGE_MASK);
 
 	return paddr;
 }
 
+static inline phys_addr_t xen_dma_to_phys(struct device *dev,
+					  dma_addr_t dma_addr)
+{
+	return xen_bus_to_phys(dev, dma_to_phys(dev, dma_addr));
+}
+
 static inline dma_addr_t xen_virt_to_bus(struct device *dev, void *address)
 {
-	return xen_phys_to_bus(dev, virt_to_phys(address));
+	return xen_phys_to_dma(dev, virt_to_phys(address));
 }
 
 static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
@@ -94,7 +103,7 @@ static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
 
 static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
 {
-	unsigned long bfn = XEN_PFN_DOWN(dma_addr);
+	unsigned long bfn = XEN_PFN_DOWN(dma_to_phys(dev, dma_addr));
 	unsigned long xen_pfn = bfn_to_local_pfn(bfn);
 	phys_addr_t paddr = (phys_addr_t)xen_pfn << XEN_PAGE_SHIFT;
 
@@ -299,12 +308,12 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	if (hwdev && hwdev->coherent_dma_mask)
 		dma_mask = hwdev->coherent_dma_mask;
 
-	/* At this point dma_handle is the physical address, next we are
+	/* At this point dma_handle is the dma address, next we are
 	 * going to set it to the machine address.
 	 * Do not use virt_to_phys(ret) because on ARM it doesn't correspond
 	 * to *dma_handle. */
-	phys = *dma_handle;
-	dev_addr = xen_phys_to_bus(hwdev, phys);
+	phys = dma_to_phys(hwdev, *dma_handle);
+	dev_addr = xen_phys_to_dma(hwdev, phys);
 	if (((dev_addr + size - 1 <= dma_mask)) &&
 	    !range_straddles_page_boundary(phys, size))
 		*dma_handle = dev_addr;
@@ -314,6 +323,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 			xen_free_coherent_pages(hwdev, size, ret, (dma_addr_t)phys, attrs);
 			return NULL;
 		}
+		*dma_handle = phys_to_dma(hwdev, *dma_handle);
 		SetPageXenRemapped(virt_to_page(ret));
 	}
 	memset(ret, 0, size);
@@ -334,7 +344,7 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 
 	/* do not use virt_to_phys because on ARM it doesn't return you the
 	 * physical address */
-	phys = xen_bus_to_phys(hwdev, dev_addr);
+	phys = xen_dma_to_phys(hwdev, dev_addr);
 
 	/* Convert the size to actually allocated. */
 	size = 1UL << (order + XEN_PAGE_SHIFT);
@@ -349,7 +359,8 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	    TestClearPageXenRemapped(page))
 		xen_destroy_contiguous_region(phys, order);
 
-	xen_free_coherent_pages(hwdev, size, vaddr, (dma_addr_t)phys, attrs);
+	xen_free_coherent_pages(hwdev, size, vaddr, phys_to_dma(hwdev, phys),
+				attrs);
 }
 
 /*
@@ -365,7 +376,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 				unsigned long attrs)
 {
 	phys_addr_t map, phys = page_to_phys(page) + offset;
-	dma_addr_t dev_addr = xen_phys_to_bus(dev, phys);
+	dma_addr_t dev_addr = xen_phys_to_dma(dev, phys);
 
 	BUG_ON(dir == DMA_NONE);
 	/*
@@ -390,7 +401,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 		return DMA_MAPPING_ERROR;
 
 	phys = map;
-	dev_addr = xen_phys_to_bus(dev, map);
+	dev_addr = xen_phys_to_dma(dev, map);
 
 	/*
 	 * Ensure that the address returned is DMA'ble
@@ -418,7 +429,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
-	phys_addr_t paddr = xen_bus_to_phys(hwdev, dev_addr);
+	phys_addr_t paddr = xen_dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
@@ -434,7 +445,7 @@ static void
 xen_swiotlb_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction dir)
 {
-	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
+	phys_addr_t paddr = xen_dma_to_phys(dev, dma_addr);
 
 	if (!dev_is_dma_coherent(dev))
 		xen_dma_sync_for_cpu(dev, dma_addr, paddr, size, dir);
@@ -447,7 +458,7 @@ static void
 xen_swiotlb_sync_single_for_device(struct device *dev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction dir)
 {
-	phys_addr_t paddr = xen_bus_to_phys(dev, dma_addr);
+	phys_addr_t paddr = xen_dma_to_phys(dev, dma_addr);
 
 	if (is_xen_swiotlb_buffer(dev, dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_DEVICE);
Signature · 1 line
2.17.1
maintainer Reviewed-by on v3 9/11
#11 lore raw

Re: [PATCH v3 09/11] swiotlb-xen: introduce phys_to_dma/dma_to_phys translations

Quoted 18 lines · Stefano Stabellini

From: Stefano Stabellini <[email protected]>

With some devices physical addresses are different than dma addresses. To be able to deal with these cases, we need to call phys_to_dma on physical addresses (including machine addresses in Xen terminology) before returning them from xen_swiotlb_alloc_coherent and xen_swiotlb_map_page.

We also need to convert dma addresses back to physical addresses using dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if we want to do any operations on them.

Call dma_to_phys in is_xen_swiotlb_buffer.
Introduce xen_phys_to_dma and call phys_to_dma in its implementation. Introduce xen_dma_to_phys and call dma_to_phys in its implementation. Call xen_phys_to_dma/xen_dma_to_phys instead of xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c.

Quoted 7 lines

Everything is taken care of by these changes except for xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a few explicit phys_to_dma/dma_to_phys calls.

Juergen

author maintainer
#12 lore raw

PATCH v3 10/11 xen/arm: introduce phys/dma translations in xen_dma_sync_for_*

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys.

Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there.

dma_cache_maint is fixed by the next patch.

---
Changes in v2:
- improve commit message
- don't use pfn_valid

Changes in v3:
- move arch_sync_dma_for_cpu/device calls to swiotlb-xen.c

---
 arch/arm/xen/mm.c         | 17 ++++++-----------
 drivers/xen/swiotlb-xen.c | 32 ++++++++++++++++++++++++--------
 include/xen/swiotlb-xen.h |  6 ++----
 3 files changed, 32 insertions(+), 23 deletions(-)
arch/arm/xen/mm.c +6 -11
index f2414ea40a79..a8251a70f442 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/cpu.h>
+#include <linux/dma-direct.h>
 #include <linux/dma-noncoherent.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
@@ -72,22 +73,16 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op)
  * dma-direct functions, otherwise we call the Xen specific version.
  */
 void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
-			  phys_addr_t paddr, size_t size,
-			  enum dma_data_direction dir)
+			  size_t size, enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
-		arch_sync_dma_for_cpu(paddr, size, dir);
-	else if (dir != DMA_TO_DEVICE)
+	if (dir != DMA_TO_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
 }
 
 void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
-			     phys_addr_t paddr, size_t size,
-			     enum dma_data_direction dir)
+			     size_t size, enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
-		arch_sync_dma_for_device(paddr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
+	if (dir == DMA_FROM_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
 	else
 		dma_cache_maint(handle, size, GNTTAB_CACHE_CLEAN);
@@ -98,7 +93,7 @@ bool xen_arch_need_swiotlb(struct device *dev,
 			   dma_addr_t dev_addr)
 {
 	unsigned int xen_pfn = XEN_PFN_DOWN(phys);
-	unsigned int bfn = XEN_PFN_DOWN(dev_addr);
+	unsigned int bfn = XEN_PFN_DOWN(dma_to_phys(dev, dev_addr));
 
 	/*
 	 * The swiotlb buffer should be used if
drivers/xen/swiotlb-xen.c +24 -8
index a6a95358a8cb..39a0f2e0847c 100644
@@ -413,8 +413,12 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	}
 
 done:
-	if (!dev_is_dma_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xen_dma_sync_for_device(dev, dev_addr, phys, size, dir);
+	if (!dev_is_dma_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
+		if (pfn_valid(PFN_DOWN(dma_to_phys(dev, dev_addr))))
+			arch_sync_dma_for_device(phys, size, dir);
+		else
+			xen_dma_sync_for_device(dev, dev_addr, size, dir);
+	}
 	return dev_addr;
 }
 
@@ -433,8 +437,12 @@ static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 
 	BUG_ON(dir == DMA_NONE);
 
-	if (!dev_is_dma_coherent(hwdev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xen_dma_sync_for_cpu(hwdev, dev_addr, paddr, size, dir);
+	if (!dev_is_dma_coherent(hwdev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
+		if (pfn_valid(PFN_DOWN(dma_to_phys(hwdev, dev_addr))))
+			arch_sync_dma_for_cpu(paddr, size, dir);
+		else
+			xen_dma_sync_for_cpu(hwdev, dev_addr, size, dir);
+	}
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(hwdev, dev_addr))
@@ -447,8 +455,12 @@ xen_swiotlb_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr,
 {
 	phys_addr_t paddr = xen_dma_to_phys(dev, dma_addr);
 
-	if (!dev_is_dma_coherent(dev))
-		xen_dma_sync_for_cpu(dev, dma_addr, paddr, size, dir);
+	if (!dev_is_dma_coherent(dev)) {
+		if (pfn_valid(PFN_DOWN(dma_to_phys(dev, dma_addr))))
+			arch_sync_dma_for_cpu(paddr, size, dir);
+		else
+			xen_dma_sync_for_cpu(dev, dma_addr, size, dir);
+	}
 
 	if (is_xen_swiotlb_buffer(dev, dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_CPU);
@@ -463,8 +475,12 @@ xen_swiotlb_sync_single_for_device(struct device *dev, dma_addr_t dma_addr,
 	if (is_xen_swiotlb_buffer(dev, dma_addr))
 		swiotlb_tbl_sync_single(dev, paddr, size, dir, SYNC_FOR_DEVICE);
 
-	if (!dev_is_dma_coherent(dev))
-		xen_dma_sync_for_device(dev, dma_addr, paddr, size, dir);
+	if (!dev_is_dma_coherent(dev)) {
+		if (pfn_valid(PFN_DOWN(dma_to_phys(dev, dma_addr))))
+			arch_sync_dma_for_device(paddr, size, dir);
+		else
+			xen_dma_sync_for_device(dev, dma_addr, size, dir);
+	}
 }
 
 /*
include/xen/swiotlb-xen.h +2 -4
index 6d235fe2b92d..d5eaf9d682b8 100644
@@ -5,11 +5,9 @@
 #include <linux/swiotlb.h>
 
 void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
-			  phys_addr_t paddr, size_t size,
-			  enum dma_data_direction dir);
+			  size_t size, enum dma_data_direction dir);
 void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
-			     phys_addr_t paddr, size_t size,
-			     enum dma_data_direction dir);
+			     size_t size, enum dma_data_direction dir);
 
 extern int xen_swiotlb_init(int verbose, bool early);
 extern const struct dma_map_ops xen_swiotlb_dma_ops;
Signature · 1 line
2.17.1
maintainer Acked-by on v3 10/11
#13 lore raw

Re: [PATCH v3 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_*

Quoted 12 lines · Stefano Stabellini

From: Stefano Stabellini <[email protected]>

xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys.

Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there.

Quoted 5 lines

dma_cache_maint is fixed by the next patch.

Juergen

author maintainer
#14 lore raw

PATCH v3 11/11 xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint

In reply to Stefano Stabellini

From: Stefano Stabellini <[email protected]>

dma_cache_maint is getting called passing a dma address which could be different from a physical address.

Add a struct device* parameter to dma_cache_maint.

Translate the dma_addr_t parameter of dma_cache_maint by calling dma_to_phys. Do it for the first page and all the following pages, in case of multipage handling.

---
Changes in v2:
- improve commit message

---
 arch/arm/xen/mm.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
arch/arm/xen/mm.c +9 -6
index a8251a70f442..396797ffe2b1 100644
@@ -43,15 +43,18 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order)
 static bool hypercall_cflush = false;
 
 /* buffers in highmem or foreign pages cannot cross page boundaries */
-static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op)
+static void dma_cache_maint(struct device *dev, dma_addr_t handle,
+			    size_t size, u32 op)
 {
 	struct gnttab_cache_flush cflush;
 
-	cflush.a.dev_bus_addr = handle & XEN_PAGE_MASK;
 	cflush.offset = xen_offset_in_page(handle);
 	cflush.op = op;
+	handle &= XEN_PAGE_MASK;
 
 	do {
+		cflush.a.dev_bus_addr = dma_to_phys(dev, handle);
+
 		if (size + cflush.offset > XEN_PAGE_SIZE)
 			cflush.length = XEN_PAGE_SIZE - cflush.offset;
 		else
@@ -60,7 +63,7 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op)
 		HYPERVISOR_grant_table_op(GNTTABOP_cache_flush, &cflush, 1);
 
 		cflush.offset = 0;
-		cflush.a.dev_bus_addr += cflush.length;
+		handle += cflush.length;
 		size -= cflush.length;
 	} while (size);
 }
@@ -76,16 +79,16 @@ void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
 			  size_t size, enum dma_data_direction dir)
 {
 	if (dir != DMA_TO_DEVICE)
-		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
+		dma_cache_maint(dev, handle, size, GNTTAB_CACHE_INVAL);
 }
 
 void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
 			     size_t size, enum dma_data_direction dir)
 {
 	if (dir == DMA_FROM_DEVICE)
-		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
+		dma_cache_maint(dev, handle, size, GNTTAB_CACHE_INVAL);
 	else
-		dma_cache_maint(handle, size, GNTTAB_CACHE_CLEAN);
+		dma_cache_maint(dev, handle, size, GNTTAB_CACHE_CLEAN);
 }
 
 bool xen_arch_need_swiotlb(struct device *dev,
Signature · 1 line
2.17.1
maintainer
#15 lore raw
In reply to Stefano Stabellini
Quoted 16 lines · Stefano Stabellini

Hi all,

This series is a collection of fixes to get Linux running on the RPi4 as dom0. Conceptually there are only two significant changes:

- make sure not to call virt_to_page on vmalloc virt addresses (patch #1)
- use phys_to_dma and dma_to_phys to translate phys to/from dma addresses (all other patches)

I addressed all comments by Christoph to v2 of the series except from the one about merging the precursor "add struct device *" patches. I can always merge them together at any time as needed.

Quoted 6 lines

Boris gave his Reviewed-by to the whole series v2. I added his Reviewed-by to all patches, including the ones with small cosmetic fixes, except for patch #8 #9 #10 because they are either new or changed significantly in this version of the series.

I retained Roman and Corey's Tested-by.

Series pushed to: xen/tip.git for-linus-5.9

Juergen

author maintainer
#16 lore raw
Quoted 17 lines · Jürgen Groß
Quoted 16 lines · Stefano Stabellini

Hi all,

This series is a collection of fixes to get Linux running on the RPi4 as dom0. Conceptually there are only two significant changes:

- make sure not to call virt_to_page on vmalloc virt addresses (patch #1)
- use phys_to_dma and dma_to_phys to translate phys to/from dma addresses (all other patches)

I addressed all comments by Christoph to v2 of the series except from the one about merging the precursor "add struct device *" patches. I can always merge them together at any time as needed.

Quoted 8 lines
Quoted 6 lines

Boris gave his Reviewed-by to the whole series v2. I added his Reviewed-by to all patches, including the ones with small cosmetic fixes, except for patch #8 #9 #10 because they are either new or changed significantly in this version of the series.

I retained Roman and Corey's Tested-by.

Series pushed to: xen/tip.git for-linus-5.9

Fantastic, thank you!