perf: ftrace enhancement
v5 cover perf: ftrace enhancement
The perf has basic kernel ftrace support but lack support of most tracing options. This serias is target to enhance the perf ftrace functionality so that we can make full use of kernel ftrace with perf.
In general, this serias be cataloged into two main changes:
1) Improve usability of existing functions. For example, we don't need to type extra option to select the tracer.
2) Add new options to support all other ftrace functions.
Here is a glance of all ftrace functions with this serias:
$ sudo perf ftrace -h
Usage: perf ftrace [<options>] [<command>]
or: perf ftrace [<options>] -- <command> [<options>]
-a, --all-cpus system-wide collection from all CPUs
-C, --cpu <cpu> list of cpus to monitor
-D, --delay <n> ms to wait before starting tracing after program start
-F, --funcs Show available functions to filter
-G, --graph-funcs <func>
trace given functions using function_graph tracer
-g, --nograph-funcs <func>
Set nograph filter on given functions
-m, --buffer-size <size>
size of per cpu buffer
-N, --notrace-funcs <func>
do not trace given functions
-p, --pid <pid> trace on existing process id
-t, --tid <tid> trace on existing thread id (exclusive to --pid)
-T, --trace-funcs <func>
trace given functions using function tracer
-t, --tracer <tracer>
tracer to use: function or function_graph (This option is deprecated)
-v, --verbose be more verbose
--func-opts <options>
function tracer options, available options: call-graph,irq-info
--graph-opts <options>
graph tracer options, available options: nosleep-time,noirqs,verbose,thresh=<n>,depth=<n>
--inherit trace children processes
v5:
o trivial fixes.
v4:
o add util/parse-sublevel-options.c
O remove -D/--graph-depth
v3:
o add --func-opts and --graph-opts to set tracer specific options.
o support units as a suffix for option '-m/--buffer-size'.
v2:
o patches for option '-u/--userstacktrace' and '--no-pager' are dropped.
o update all related perf documentation.
o rename some options. Now all funcgraph tracer options are prefixed with '--graph-', while all function tracer options are prefixed with '--func-'.
o mark old options deprecated instead of removing them.
Changbin Du (17):
perf ftrace: select function/function_graph tracer automatically perf ftrace: add option '-F/--funcs' to list available functions perf ftrace: add option -t/--tid to filter by thread id perf ftrace: factor out function write_tracing_file_int() perf ftrace: add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: show trace column header
perf ftrace: add option '--inherit' to trace children processes
perf: util: add general function to parse sublevel options perf ftrace: add support for tracing option 'func_stack_trace' perf ftrace: add support for trace option sleep-time
perf ftrace: add support for trace option funcgraph-irqs perf ftrace: add support for tracing option 'irq-info' perf ftrace: add option 'verbose' to show more info for graph tracer perf ftrace: add support for trace option tracing_thresh
perf: ftrace: allow set graph depth by '--graph-opts'
perf ftrace: add option -D/--delay to delay tracing
perf ftrace: add change log
tools/perf/Documentation/perf-config.txt | 5 - tools/perf/Documentation/perf-ftrace.txt | 37 ++- tools/perf/builtin-ftrace.c | 367 ++++++++++++++++++++++- tools/perf/util/Build | 1 + tools/perf/util/debug.c | 61 ++-- tools/perf/util/parse-sublevel-options.c | 70 +++++ tools/perf/util/parse-sublevel-options.h | 11 + 7 files changed, 484 insertions(+), 68 deletions(-) create mode 100644 tools/perf/util/parse-sublevel-options.c create mode 100644 tools/perf/util/parse-sublevel-options.h
Signature · 1 line
2.25.1
PATCH v5 1/17 perf ftrace: select function/function_graph tracer automatically
The '-g/-G' options have already implied function_graph tracer should be used instead of function tracer. So the extra option '--tracer' can be killed.
This patch changes the behavior as below:
- By default, function tracer is used.
- If '-g' or '-G' option is on, then function_graph tracer is used.
- The perf configuration item 'ftrace.tracer' is marked as deprecated.
- The option '--tracer' is marked as deprecated.
Here are some examples.
This will start tracing all functions using function tracer:
$ sudo perf ftrace
This will trace all functions using function graph tracer:
$ sudo perf ftrace -G '*'
This will trace function vfs_read using function graph tracer:
$ sudo perf ftrace -G vfs_read
---
v3: remove default '*' for -G/-T.
--- tools/perf/Documentation/perf-config.txt | 5 ----- tools/perf/Documentation/perf-ftrace.txt | 2 +- tools/perf/builtin-ftrace.c | 15 ++++++++++----- 3 files changed, 11 insertions(+), 11 deletions(-)
tools/perf/Documentation/perf-config.txt +0 -5
@@ -612,11 +612,6 @@ trace.*:: "libbeauty", the default, to use the same argument beautifiers used in the strace-like sys_enter+sys_exit lines. -ftrace.*:: - ftrace.tracer:: - Can be used to select the default tracer. Possible values are - 'function' and 'function_graph'. - llvm.*:: llvm.clang-path:: Path to clang. If omit, search it from $PATH.
tools/perf/Documentation/perf-ftrace.txt +1 -1
@@ -24,7 +24,7 @@ OPTIONS -t:: --tracer=:: - Tracer to use: function_graph or function. + Tracer to use: function_graph or function. This option is deprecated. -v:: --verbose=::
tools/perf/builtin-ftrace.c +10 -5
@@ -27,7 +27,6 @@#include "util/cap.h" #include "util/config.h" -#define DEFAULT_TRACER "function_graph"struct perf_ftrace {struct evlist *evlist;
@@ -419,6 +418,7 @@ static int perf_ftrace_config(const char *var, const char *value, void *cb)if (strcmp (var,"ftrace.tracer" ))return -1 ; +pr_warning ("Configuration ftrace.tracer is deprecated\n" );if (!strcmp (value,"function_graph" ) || !strcmp (value,"function" )) { ftrace->tracer = value;
@@ -459,7 +459,7 @@ int cmd_ftrace(int argc, const char **argv) {int ret;struct perf_ftrace ftrace = { - .tracer =DEFAULT_TRACER , + .tracer ="function" , .target = { .uid =UINT_MAX , }, };const char *const ftrace_usage[] = {
@@ -469,7 +469,7 @@ int cmd_ftrace(int argc, const char **argv) };const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" , -"tracer to use: function_graph(default) or function" ), +"tracer to use: function or function_graph (This option is deprecated)" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose,
@@ -479,11 +479,13 @@ int cmd_ftrace(int argc, const char **argv)OPT_STRING ('C' ,"cpu" , &ftrace.target.cpu_list,"cpu" ,"list of cpus to monitor" ),OPT_CALLBACK ('T' ,"trace-funcs" , &ftrace.filters,"func" , -"trace given functions only" , parse_filter_func), +"trace given functions using function tracer" , + parse_filter_func),OPT_CALLBACK ('N' ,"notrace-funcs" , &ftrace.notrace,"func" ,"do not trace given functions" , parse_filter_func),OPT_CALLBACK ('G' ,"graph-funcs" , &ftrace.graph_funcs,"func" , -"Set graph filter on given functions" , parse_filter_func), +"trace given functions using function_graph tracer" , + parse_filter_func),OPT_CALLBACK ('g' ,"nograph-funcs" , &ftrace.nograph_funcs,"func" ,"Set nograph filter on given functions" , parse_filter_func), OPT_INTEGER('D', "graph-depth", &ftrace.graph_depth,
@@ -505,6 +507,9 @@ int cmd_ftrace(int argc, const char **argv)if (!argc &&target__none (&ftrace.target)) ftrace.target.system_wide = true; +if (!list_empty (&ftrace.graph_funcs) || !list_empty (&ftrace.nograph_funcs)) + ftrace.tracer ="function_graph" ; + ret =target__validate (&ftrace.target);if (ret) {char errbuf[512 ];
Signature · 1 line
2.25.1
PATCH v5 2/17 perf ftrace: add option '-F/--funcs' to list available functions
In reply to Changbin DuThis adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file 'available_filter_functions'.
$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_context
---
v2: option name '-l/--list-functions' -> '-F/--funcs'
--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)
tools/perf/Documentation/perf-ftrace.txt +4 -0
@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).
tools/perf/builtin-ftrace.c +43 -0
67 lines not on this page · raw message
Signature · 1 line
2.25.1
Namhyung Kim
maintainerRe: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
Hello,
Quoted 75 lines · Changbin Du
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +20
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{ +char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + }
tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 159
Quoted 10 lines
tools/perf/builtin-ftrace.c +10
-0+ +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 ) + goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ;
As I said before, there's no break in the loop above so the ret can never be 0.
Thanks
Namhyung
Quoted 33 lines
tools/perf/builtin-ftrace.c +13
-1+ +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose, --2.25.1
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
Em Mon, Jul 13, 2020 at 10:49:40AM +0900, Namhyung Kim escreveu:
Quoted 83 lines
Hello,
Quoted 80 lines · Changbin Du
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +25
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{ +char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + } + +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 )
Quoted 8 lines
tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 159
Quoted 5 lines
tools/perf/builtin-ftrace.c +5
-0+ goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ;As I said before, there's no break in the loop above so the ret can never be 0.
Yeah, this is clearly wrong, that ret = 0 will never be reached.
- Arnaldo
Quoted 36 lines
Thanks
NamhyungQuoted 33 lines
tools/perf/builtin-ftrace.c +13
-1+ +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose, --2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
In reply to Namhyung KimQuoted 83 lines · Namhyung Kim
Hello,
Quoted 80 lines · Changbin Du
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +25
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{ +char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + } + +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 )
Quoted 9 lines
tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 159
Quoted 5 lines
tools/perf/builtin-ftrace.c +5
-0+ goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ;As I said before, there's no break in the loop above so the ret can never be 0.
I see now. Just fixed it as:
while (true) {
int n = read(fd, buf, sizeof(buf));- if (n <= 0)
+ if (n == 0)
+ break;
+ else if (n < 0)
goto out_close;
+
Thanks!
Quoted 36 lines
Thanks
NamhyungQuoted 33 lines
tools/perf/builtin-ftrace.c +13
-1+ +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose, --2.25.1
Signature · 2 lines
Cheers, Changbin Du
Re: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
In reply to Changbin DuQuoted 52 lines · On Sat, 11 Jul 2020 20:40:20 +0800 Changbin Du <[email protected]> wrote:
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +1
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;
tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 132
Quoted 5 lines
tools/perf/builtin-ftrace.c +2
-0@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{
All this is looking like its duplicating code that we are working on for libtracefs.
Would you like to start contributing to that, and when we get the libtracefs.so packed in distributions, we can easily create the perf ftrace without having to rewrite the wheel 10 times?
-- Steve
Quoted 57 lines
tools/perf/builtin-ftrace.c +40
-0+char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + } + +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 ) + goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ; + +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose,
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
Em Fri, Jul 17, 2020 at 11:05:04AM -0400, Steven Rostedt escreveu:
Quoted 64 lines
Quoted 52 lines · On Sat, 11 Jul 2020 20:40:20 +0800 Changbin Du <[email protected]> wrote:
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +1
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 132
Quoted 5 lines
tools/perf/builtin-ftrace.c +2
-0@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{All this is looking like its duplicating code that we are working on for libtracefs.
Quoted 3 lines
Would you like to start contributing to that, and when we get the libtracefs.so packed in distributions, we can easily create the perf ftrace without having to rewrite the wheel 10 times?
Or we can use as soon as it is available, not preventing 'perf ftrace' from having to wait for libtracefs.so?
Duplication is normal at some point, Changbin is moving 'perf ftrace' forward, and has been doing this thru several patch series revisions, if we continue putting new requirements, it gets tiresome at some point :-\
- Arnaldo
Quoted 61 lines
-- Steve
Quoted 57 lines
tools/perf/builtin-ftrace.c +40
-0+char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + } + +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 ) + goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ; + +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose,
Signature · 1 line
- Arnaldo
Re: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
Quoted 11 lines · On Fri, 17 Jul 2020 13:21:16 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 4 lines
Would you like to start contributing to that, and when we get the libtracefs.so packed in distributions, we can easily create the perf ftrace without having to rewrite the wheel 10 times?
Or we can use as soon as it is available, not preventing 'perf ftrace' from having to wait for libtracefs.so?
Duplication is normal at some point, Changbin is moving 'perf ftrace' forward, and has been doing this thru several patch series revisions, if we continue putting new requirements, it gets tiresome at some point :-\
We're finally at the point to move libtracefs.so and libtraceevent.so into their own repository.
My fear is that the two will become incompatible, and forked forever.
-- Steve
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
Em Fri, Jul 17, 2020 at 12:27:40PM -0400, Steven Rostedt escreveu:
Quoted 8 lines · On Fri, 17 Jul 2020 13:21:16 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 6 lines
Quoted 3 lines
Would you like to start contributing to that, and when we get the libtracefs.so packed in distributions, we can easily create the perf ftrace without having to rewrite the wheel 10 times?
Or we can use as soon as it is available, not preventing 'perf ftrace' from having to wait for libtracefs.so?
Quoted 8 lines
Quoted 3 lines
Duplication is normal at some point, Changbin is moving 'perf ftrace' forward, and has been doing this thru several patch series revisions, if we continue putting new requirements, it gets tiresome at some point :-\
We're finally at the point to move libtracefs.so and libtraceevent.so into their own repository.
My fear is that the two will become incompatible, and forked forever.
I don't share this fear, and since libtracefs is not generally available, this will make perf progress to be slowed down, so its better to merge what he has so far, after some review issues that surfaced are solved, and when a better way of achieving that is available, consider using it.
- Arnaldo
Re: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
In reply to Steven RostedtQuoted 64 lines · Steven Rostedt
Quoted 52 lines · On Sat, 11 Jul 2020 20:40:20 +0800 Changbin Du <[email protected]> wrote:
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. + -p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +1
-0@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;tools/perf/builtin-ftrace.c static int append_tracing_file(const char *name, const char *val) · line 132
Quoted 5 lines
tools/perf/builtin-ftrace.c +2
-0@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{All this is looking like its duplicating code that we are working on for libtracefs.
Quoted 5 lines
Would you like to start contributing to that, and when we get the libtracefs.so packed in distributions, we can easily create the perf ftrace without having to rewrite the wheel 10 times?
-- Steve
Yes, I'd like to join the development of libtracefs. But honestly speaking, I am not sure whether I can get enough time on it since I have to take care of my little baby :).
I have the same opinion with Arnaldo that we can merge what we'v already done here. Then consider to migrate to libtracefs instead before adding more new features.
Signature · 2 lines
Cheers, Changbin Du
Ian Rogers
reviewerRe: [PATCH v5 02/17] perf ftrace: add option '-F/--funcs' to list available functions
In reply to Changbin DuQuoted 30 lines · Changbin Du
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file '
available_filter_functions'.$ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_contextSigned-off-by Changbin Du <[email protected]>---
v2: option name '-l/--list-functions' -> '-F/--funcs'--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 43 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0
tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 36
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -30,6 +30,10 @@ OPTIONS --verbose=:: Verbosity level. +-F:: +--funcs:: + List all available functions to trace. +
Does "perf list tracepoint" contain this information? Perhaps add a note to clarify.
Thanks,
Ian
Quoted 81 lines
tools/perf/Documentation/perf-ftrace.txt +0
-0-p:: --pid=:: Trace on existing process id (comma separated list).tools/perf/builtin-ftrace.c +43
-1@@ -32,6 +32,7 @@ struct perf_ftrace {struct evlist *evlist;struct target target;const char *tracer; +bool list_avail_functions;struct list_head filters;struct list_head notrace;struct list_head graph_funcs;@@ -127,6 +128,43 @@ static int append_tracing_file(const char *name, const char *val)return __write_tracing_file (name, val, true); } +static int read_tracing_file_to_stdout (const char *name) +{ +char buf[4096 ]; +char *file; +int fd; +int ret =-1 ; + + file =get_tracing_file (name); +if (!file) { +pr_debug ("cannot get tracing file: %s\n" , name); +return -1 ; + } + + fd =open (file,O_RDONLY ); +if (fd <0 ) { +pr_debug ("cannot open tracing file: %s: %s\n" , + name,str_error_r (errno, buf,sizeof (buf))); + goto out; + } + +/* read contents to stdout */ +while (true) { +int n =read (fd, buf,sizeof (buf)); +if (n <=0 ) + goto out_close; +if (fwrite (buf, n,1 , stdout) !=1 ) + goto out_close; + } + ret =0 ; + +out_close: +close (fd); +out: +put_tracing_file (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );@@ -301,6 +339,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)signal (SIGCHLD , sig_handler);signal (SIGPIPE , sig_handler); +if (ftrace->list_avail_functions) +return read_tracing_file_to_stdout ("available_filter_functions" ); +if (reset_tracing_files (ftrace) <0 ) {pr_err ("failed to reset ftrace\n" ); goto out;@@ -470,6 +511,8 @@ int cmd_ftrace(int argc, const char **argv)const struct option ftrace_options[] = {OPT_STRING ('t' ,"tracer" , &ftrace.tracer,"tracer" ,"tracer to use: function or function_graph (This option is deprecated)" ), +OPT_BOOLEAN ('F' ,"funcs" , &ftrace.list_avail_functions, +"Show available functions to filter" ),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), OPT_INCR('v', "verbose", &verbose, --2.25.1
PATCH v5 3/17 perf ftrace: add option -t/--tid to filter by thread id
In reply to Changbin DuThis allows us to trace single thread instead of the whole process.
--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)
tools/perf/Documentation/perf-ftrace.txt +4 -0
@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). + -a:: --all-cpus:: Force system-wide collection. Scripts run without a <command>
tools/perf/builtin-ftrace.c +2 -0
@@ -515,6 +515,8 @@ int cmd_ftrace(int argc, const char **argv) "Show available functions to filter"),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), +OPT_STRING ('t' ,"tid" , &ftrace.target.tid,"tid" , +"trace on existing thread id (exclusive to --pid)" ),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose" ), OPT_BOOLEAN('a', "all-cpus", &ftrace.target.system_wide,
Signature · 1 line
2.25.1
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
Quoted 13 lines
This allows us to trace single thread instead of the whole process.
Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0
tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 44
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). +
Humm, I just tried:
[root@five ~]# yes > /dev/null &
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#
After waiting for a while, nothing, what am I doing wrong?
- Arnaldo
Quoted 19 lines
tools/perf/Documentation/perf-ftrace.txt +0
-0-a:: --all-cpus:: Force system-wide collection. Scripts run without a <command>tools/perf/builtin-ftrace.c +2
-0@@ -515,6 +515,8 @@ int cmd_ftrace(int argc, const char **argv) "Show available functions to filter"),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), +OPT_STRING ('t' ,"tid" , &ftrace.target.tid,"tid" , +"trace on existing thread id (exclusive to --pid)" ),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose" ), OPT_BOOLEAN('a', "all-cpus", &ftrace.target.system_wide,Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Quoted 25 lines · Arnaldo Carvalho de Melo
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
Quoted 13 lines
This allows us to trace single thread instead of the whole process.
Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 44
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). +Humm, I just tried:
Quoted 7 lines
[root@five ~]# yes >
/dev/null&
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#After waiting for a while, nothing, what am I doing wrong?
I got it wrong. Currently ftrace only can filter by pid. If the pid is not the main thread it won't work.
So this patch makes no sense. will drop this.
Quoted 26 lines
- Arnaldo
Quoted 19 lines
tools/perf/Documentation/perf-ftrace.txt +0
-0-a:: --all-cpus:: Force system-wide collection. Scripts run without a <command>tools/perf/builtin-ftrace.c +2
-0@@ -515,6 +515,8 @@ int cmd_ftrace(int argc, const char **argv) "Show available functions to filter"),OPT_STRING ('p' ,"pid" , &ftrace.target.pid,"pid" ,"trace on existing process id" ), +OPT_STRING ('t' ,"tid" , &ftrace.target.tid,"tid" , +"trace on existing thread id (exclusive to --pid)" ),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose" ), OPT_BOOLEAN('a', "all-cpus", &ftrace.target.system_wide,Signature · 1 line
2.25.1Signature · 1 line
- Arnaldo
Signature · 2 lines
Cheers, Changbin Du
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Em Fri, Jul 17, 2020 at 09:26:50PM +0800, Changbin Du escreveu:
Quoted 18 lines · Arnaldo Carvalho de Melo
Quoted 16 lines
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 43
Quoted 8 lines
+++
b/tools/perf/Documentation/perf-ftrace.txttools/perf/Documentation/perf-ftrace.txt +3
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list).Humm, I just tried:
[root@five ~]# yes >
/dev/null&
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#
Quoted 6 lines
Quoted 1 line
After waiting for a while, nothing, what am I doing wrong?
I got it wrong. Currently ftrace only can filter by pid. If the pid is not the main thread it won't work.
So this patch makes no sense. will drop this.
I think you could alternatively keep it but inform the user that this target, available to other perf commands, isn't available for ftrace as it doesn't support it, this way when the user goes from:
perf trace|top|record|script|report --tid 1234
to:
perf ftrace --tid 1234
He gets a message like:
ERROR: 'ftrace' doesn't support the --tid target, try with --pid
And that would be more useful, provides an explanation as why that target can't be used and suggests an alternative.
- Arnaldo
Re: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
In reply to Changbin DuQuoted 31 lines · On Fri, 17 Jul 2020 21:26:50 +0800 Changbin Du <[email protected]> wrote:
Quoted 30 lines · Arnaldo Carvalho de Melo
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
Quoted 13 lines
This allows us to trace single thread instead of the whole process.
Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 44
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). +Humm, I just tried:
[root@five ~]# yes >
/dev/null&
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#
Quoted 4 lines
Quoted 2 lines
After waiting for a while, nothing, what am I doing wrong?
I got it wrong. Currently ftrace only can filter by pid. If the pid is not the main thread it won't work.
Wait what?
The "pid" for ftrace is really a "task id" which is a thread id.
[root@bxtest ~]# yes > /dev/null &
[1] 6799
[root@bxtest ~]# trace-cmd record -e all -P 6799
Hit Ctrl^C to stop recording
^CCPU 0: 3573031 events lost
CPU0 data recorded at offset=0x838000
627675136 bytes in size
CPU1 data recorded at offset=0x25ed1000
0 bytes in size
CPU2 data recorded at offset=0x25ed1000
0 bytes in size
CPU3 data recorded at offset=0x25ed1000
0 bytes in size
CPU4 data recorded at offset=0x25ed1000
0 bytes in size
CPU5 data recorded at offset=0x25ed1000
0 bytes in size
CPU6 data recorded at offset=0x25ed1000
0 bytes in size
CPU7 data recorded at offset=0x25ed1000
0 bytes in size
[root@bxtest ~]# trace-cmd report | head
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 4 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
yes-6799 [000] 67825.580902: sys_exit: NR 1 = 8192
yes-6799 [000] 67825.580903: sys_exit_write: 0x2000What's different about tid vs pid?
-- Steve
Quoted 3 lines
So this patch makes no sense. will drop this.
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Em Fri, Jul 17, 2020 at 01:01:24PM -0400, Steven Rostedt escreveu:
Quoted 72 lines
Quoted 30 lines · On Fri, 17 Jul 2020 21:26:50 +0800 Changbin Du <[email protected]> wrote:
Quoted 28 lines · Arnaldo Carvalho de Melo
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
Quoted 13 lines
This allows us to trace single thread instead of the whole process.
Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 44
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). +Humm, I just tried:
[root@five ~]# yes >
/dev/null&
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#Quoted 4 lines
Quoted 1 line
After waiting for a while, nothing, what am I doing wrong?
I got it wrong. Currently ftrace only can filter by pid. If the pid is not the main thread it won't work.
Wait what?
The "pid" for ftrace is really a "task id" which is a thread id.
[root@bxtest ~]# yes >
/dev/null&
[1] 6799
[root@bxtest ~]# trace-cmd record -e all -P 6799
Hit Ctrl^C to stop recording
^CCPU 0: 3573031 events lost
CPU0 data recorded at offset=0x838000627675136 bytes in sizeCPU1 data recorded at offset=0x25ed1000
0 bytes in size
CPU2 data recorded at offset=0x25ed1000
0 bytes in size
CPU3 data recorded at offset=0x25ed1000
0 bytes in size
CPU4 data recorded at offset=0x25ed1000
0 bytes in size
CPU5 data recorded at offset=0x25ed1000
0 bytes in size
CPU6 data recorded at offset=0x25ed1000
0 bytes in size
CPU7 data recorded at offset=0x25ed1000
0 bytes in size
[root@bxtest ~]# trace-cmd report | head
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 4 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
Quoted 5 lines
yes-6799 [000] 67825.580902: sys_exit: NR 1 = 8192 yes-6799 [000] 67825.580903: sys_exit_write: 0x2000What's different about tid vs pid?
Say you use:
^C[root@ssdandy ~]# cyclictest --smp -um -p95
# /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 0.05 0.03 0.06 2/409 29072
T: 0 (29065) P:95 I:1000 C: 518 Min: 2 Act: 2 Avg: 2 Max: 6
T: 1 (29066) P:95 I:1500 C: 343 Min: 2 Act: 2 Avg: 2 Max: 5
T: 2 (29067) P:95 I:2000 C: 256 Min: 2 Act: 2 Avg: 2 Max: 7
T: 3 (29068) P:95 I:2500 C: 203 Min: 2 Act: 2 Avg: 2 Max: 5
T: 4 (29069) P:95 I:3000 C: 168 Min: 2 Act: 2 Avg: 3 Max: 6
T: 5 (29070) P:95 I:3500 C: 143 Min: 2 Act: 2 Avg: 2 Max: 6
T: 6 (29071) P:95 I:4000 C: 124 Min: 2 Act: 2 Avg: 2 Max: 7
T: 7 (29072) P:95 I:4500 C: 110 Min: 2 Act: 2 Avg: 2 Max:
Then we do:
# pidof cyclictest 29064 #
If we use:
[root@ssdandy ~]# perf record --pid 29064
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (866 samples) ]
[root@ssdandy ~]# perf report --task
# pid tid ppid comm
0 0 -1 |swapper
29064 29064 -1 |cyclictest
29064 29065 -1 |cyclictest
29064 29066 -1 |cyclictest
29064 29067 -1 |cyclictest
29064 29068 -1 |cyclictest
29064 29069 -1 |cyclictest
29064 29070 -1 |cyclictest
29064 29071 -1 |cyclictest
29064 29072 -1 |cyclictest[root@ssdandy ~]#
If we are interested only on the thread running on CPU3 we can do:
[root@ssdandy ~]# perf report --task
# pid tid ppid comm
0 0 -1 |swapper
29064 29064 -1 |cyclictest
29064 29068 -1 |cyclictest[root@ssdandy ~]#
The first 29064 is just to have info on who created 29068, i.e.:
Its just the synthesized info for 29068 creator:
[root@ssdandy ~]# perf report -D | grep -w 29064/29064
0 0x4690 [0x30]: PERF_RECORD_COMM: cyclictest:29064/29064
0 0x46c0 [0x70]: PERF_RECORD_MMAP2 29064/29064: [0x400000(0xa000) @ 0 fd:00 136246288 0]: r-xp /usr/bin/cyclictest
0 0x4730 [0x80]: PERF_RECORD_MMAP2 29064/29064: [0x7f990f505000(0x15000) @ 0 fd:00 201479398 0]: r-xp /usr/lib64/libgcc_s-4.8.5-20150702.so.1 0 0x47b0 [0x70]: PERF_RECORD_MMAP2 29064/29064: [0x7f990f71b000(0x1c3000) @ 0 fd:00 201334455 0]: r-xp /usr/lib64/libc-2.17.so 0 0x4820 [0x78]: PERF_RECORD_MMAP2 29064/29064: [0x7f990fae9000(0xa000) @ 0 fd:00 204604380 0]: r-xp /usr/lib64/libnuma.so.1.0.0 0 0x4898 [0x78]: PERF_RECORD_MMAP2 29064/29064: [0x7f990fcf5000(0x17000) @ 0 fd:00 201335636 0]: r-xp /usr/lib64/libpthread-2.17.so 0 0x4910 [0x78]: PERF_RECORD_MMAP2 29064/29064: [0x7f990ff11000(0x7000) @ 0 fd:00 201335640 0]: r-xp /usr/lib64/librt-2.17.so 0 0x4988 [0x70]: PERF_RECORD_MMAP2 29064/29064: [0x7f9910119000(0x22000) @ 0 fd:00 203595299 0]: r-xp /usr/lib64/ld-2.17.so 0 0x49f8 [0x60]: PERF_RECORD_MMAP2 29064/29064: [0x7fff0b52d000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
0 0x4a58 [0x68]: PERF_RECORD_MMAP2 29064/29064: [0xffffffffff600000(0x1000) @ 0 00:00 0 0]: r-xp [vsyscall] [root@ssdandy ~]#
No PERF_RECORD_SAMPLEs.
Those are only for:
[root@ssdandy ~]# perf report -D | grep PERF_RECORD_SAMPLE | head -5
147224656598815 0x4ac0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068: 0xffffffffa8e5b568 period: 1 addr: 0 147224656606270 0x4ae8 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068: 0xffffffffa8e5b568 period: 1 addr: 0 147224656611284 0x4b10 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068: 0xffffffffa8e5b568 period: 5 addr: 0 147224656616225 0x4b38 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068: 0xffffffffa8e5b568 period: 35 addr: 0 147224656621152 0x4b60 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068: 0xffffffffa8e5b568 period: 252 addr: 0 [root@ssdandy ~]#
[root@ssdandy ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d: -f3 | sort -u
29064/29068
[root@ssdandy ~]#
Is there a way in ftrace to ask for a pid and its children? Pre-existing and and new ones the --pid specified will create after we start monitoring?
- Arnaldo
Re: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Quoted 39 lines · On Fri, 17 Jul 2020 14:40:53 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Say you use:
^C[root@ssdandy ~]# cyclictest --smp -um -p95
# /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 0.05 0.03 0.06 2/409 29072T: 0 (29065) P:95 I:1000 C: 518 Min: 2 Act: 2 Avg: 2 Max: 6
T: 1 (29066) P:95 I:1500 C: 343 Min: 2 Act: 2 Avg: 2 Max: 5
T: 2 (29067) P:95 I:2000 C: 256 Min: 2 Act: 2 Avg: 2 Max: 7
T: 3 (29068) P:95 I:2500 C: 203 Min: 2 Act: 2 Avg: 2 Max: 5
T: 4 (29069) P:95 I:3000 C: 168 Min: 2 Act: 2 Avg: 3 Max: 6
T: 5 (29070) P:95 I:3500 C: 143 Min: 2 Act: 2 Avg: 2 Max: 6
T: 6 (29071) P:95 I:4000 C: 124 Min: 2 Act: 2 Avg: 2 Max: 7
T: 7 (29072) P:95 I:4500 C: 110 Min: 2 Act: 2 Avg: 2 Max:Then we do:
# pidof cyclictest 29064 #If we use:
[root@ssdandy ~]# perf record --pid 29064
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (866 samples) ][root@ssdandy ~]# perf report --task
# pid tid ppid comm0 0 -1 |swapper 29064 29064 -1 |cyclictest 29064 29065 -1 |cyclictest 29064 29066 -1 |cyclictest 29064 29067 -1 |cyclictest 29064 29068 -1 |cyclictest 29064 29069 -1 |cyclictest 29064 29070 -1 |cyclictest 29064 29071 -1 |cyclictest 29064 29072 -1 |cyclictest
Quoted 1 line
[root@ssdandy ~]#
"ftrace" is inside the kernel. But you could specify all those PIDs in the set_ftrace_pid and set_event_pid files, and they will be traced. If you want to trace the children of those PIDs, you would need to set the options function function-fork and event-fork respectively. And then any time a process with a pid in the set_ftrace_pid or set_event_pid file forks, its child will also be added to that file and it too will be traced. If the fork options are set, then when a task exits, its pid will be removed from the file.
echo 1 > options/function-fork
echo 1 > options/event-fork
Quoted 39 lines
If we are interested only on the thread running on CPU3 we can do:
[root@ssdandy ~]# perf report --task
# pid tid ppid comm0 0 -1 |swapper 29064 29064 -1 |cyclictest 29064 29068 -1 |cyclictest[root@ssdandy ~]#
The first 29064 is just to have info on who created 29068, i.e.:
Its just the synthesized info for 29068 creator:
[root@ssdandy ~]# perf report -D | grep -w 29064/29064
00x4690[0x30]:PERF_RECORD_COMM: cyclictest:29064/29064
00x46c0[0x70]:PERF_RECORD_MMAP229064/29064: [0x400000(0xa000) @ 0 fd:00 136246288 0]: r-xp/usr/bin/cyclictest
00x4730[0x80]:PERF_RECORD_MMAP229064/29064: [0x7f990f505000(0x15000) @ 0 fd:00 201479398 0]: r-xp/usr/lib64/libgcc_s-4.8.5-20150702.so.100x47b0[0x70]:PERF_RECORD_MMAP229064/29064: [0x7f990f71b000(0x1c3000) @ 0 fd:00 201334455 0]: r-xp/usr/lib64/libc-2.17.so00x4820[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990fae9000(0xa000) @ 0 fd:00 204604380 0]: r-xp/usr/lib64/libnuma.so.1.0.000x4898[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990fcf5000(0x17000) @ 0 fd:00 201335636 0]: r-xp/usr/lib64/libpthread-2.17.so00x4910[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990ff11000(0x7000) @ 0 fd:00 201335640 0]: r-xp/usr/lib64/librt-2.17.so00x4988[0x70]:PERF_RECORD_MMAP229064/29064: [0x7f9910119000(0x22000) @ 0 fd:00 203595299 0]: r-xp/usr/lib64/ld-2.17.so00x49f8[0x60]:PERF_RECORD_MMAP229064/29064: [0x7fff0b52d000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
00x4a58[0x68]:PERF_RECORD_MMAP229064/29064: [0xffffffffff600000(0x1000) @ 0 00:00 0 0]: r-xp [vsyscall] [root@ssdandy ~]#No
PERF_RECORD_SAMPLEs.Those are only for:
[root@ssdandy ~]# perf report -D | grep
PERF_RECORD_SAMPLE| head -5
1472246565988150x4ac0[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 1 addr: 0 1472246566062700x4ae8[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 1 addr: 0 1472246566112840x4b10[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 5 addr: 0 1472246566162250x4b38[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 35 addr: 0 1472246566211520x4b60[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 252 addr: 0 [root@ssdandy ~]#
Quoted 2 lines
[root@ssdandy ~]# perf report -D | grep
PERF_RECORD_SAMPLE| cut -d: -f3 | sort -u
29064/29068
The above can somewhat be done in trace-cmd, but not fully. But that's all userspace commands, nothing with the kernel.
Quoted 6 lines
[root@ssdandy ~]#
Is there a way in ftrace to ask for a pid and its children? Pre-existing and and new ones the --pid specified will create after we start monitoring?
As described above, yes. :-)
-- Steve
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Em Fri, Jul 17, 2020 at 01:53:51PM -0400, Steven Rostedt escreveu:
Quoted 52 lines · On Fri, 17 Jul 2020 14:40:53 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 40 lines
Say you use:
^C[root@ssdandy ~]# cyclictest --smp -um -p95
# /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 0.05 0.03 0.06 2/409 29072T: 0 (29065) P:95 I:1000 C: 518 Min: 2 Act: 2 Avg: 2 Max: 6
T: 1 (29066) P:95 I:1500 C: 343 Min: 2 Act: 2 Avg: 2 Max: 5
T: 2 (29067) P:95 I:2000 C: 256 Min: 2 Act: 2 Avg: 2 Max: 7
T: 3 (29068) P:95 I:2500 C: 203 Min: 2 Act: 2 Avg: 2 Max: 5
T: 4 (29069) P:95 I:3000 C: 168 Min: 2 Act: 2 Avg: 3 Max: 6
T: 5 (29070) P:95 I:3500 C: 143 Min: 2 Act: 2 Avg: 2 Max: 6
T: 6 (29071) P:95 I:4000 C: 124 Min: 2 Act: 2 Avg: 2 Max: 7
T: 7 (29072) P:95 I:4500 C: 110 Min: 2 Act: 2 Avg: 2 Max:Then we do:
# pidof cyclictest 29064 #If we use:
[root@ssdandy ~]# perf record --pid 29064
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (866 samples) ][root@ssdandy ~]# perf report --task
# pid tid ppid comm0 0 -1 |swapper 29064 29064 -1 |cyclictest 29064 29065 -1 |cyclictest 29064 29066 -1 |cyclictest 29064 29067 -1 |cyclictest 29064 29068 -1 |cyclictest 29064 29069 -1 |cyclictest 29064 29070 -1 |cyclictest 29064 29071 -1 |cyclictest 29064 29072 -1 |cyclictestQuoted 1 line
[root@ssdandy ~]#
"ftrace" is inside the kernel. But you could specify all those PIDs in the
set_ftrace_pidandset_event_pidfiles, and they will be traced. If you want to trace the children of those PIDs, you would need to set the options function function-fork and event-fork respectively. And then any time a process with a pid in theset_ftrace_pidorset_event_pidfile forks, its child will also be added to that file and it too will be traced. If the fork options are set, then when a task exits, its pid will be removed from the file.
Quoted 2 lines
echo 1 > options/function-fork
echo 1 > options/event-fork
cool, so its possible to have the same sort of behaviour one expects using --pid or --tid and --inherit with perf record/trace/top/etc
Its just some confusion about what perf understands by --pid and --tid and the jargon used by ftrace, we can make 'perf ftrace' use the knobs you mentioned and achieve the expected results as with other perf subcommands, good.
Quoted 44 lines
Quoted 38 lines
If we are interested only on the thread running on CPU3 we can do:
[root@ssdandy ~]# perf report --task
# pid tid ppid comm0 0 -1 |swapper 29064 29064 -1 |cyclictest 29064 29068 -1 |cyclictest[root@ssdandy ~]#
The first 29064 is just to have info on who created 29068, i.e.:
Its just the synthesized info for 29068 creator:
[root@ssdandy ~]# perf report -D | grep -w 29064/29064
00x4690[0x30]:PERF_RECORD_COMM: cyclictest:29064/29064
00x46c0[0x70]:PERF_RECORD_MMAP229064/29064: [0x400000(0xa000) @ 0 fd:00 136246288 0]: r-xp/usr/bin/cyclictest
00x4730[0x80]:PERF_RECORD_MMAP229064/29064: [0x7f990f505000(0x15000) @ 0 fd:00 201479398 0]: r-xp/usr/lib64/libgcc_s-4.8.5-20150702.so.100x47b0[0x70]:PERF_RECORD_MMAP229064/29064: [0x7f990f71b000(0x1c3000) @ 0 fd:00 201334455 0]: r-xp/usr/lib64/libc-2.17.so00x4820[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990fae9000(0xa000) @ 0 fd:00 204604380 0]: r-xp/usr/lib64/libnuma.so.1.0.000x4898[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990fcf5000(0x17000) @ 0 fd:00 201335636 0]: r-xp/usr/lib64/libpthread-2.17.so00x4910[0x78]:PERF_RECORD_MMAP229064/29064: [0x7f990ff11000(0x7000) @ 0 fd:00 201335640 0]: r-xp/usr/lib64/librt-2.17.so00x4988[0x70]:PERF_RECORD_MMAP229064/29064: [0x7f9910119000(0x22000) @ 0 fd:00 203595299 0]: r-xp/usr/lib64/ld-2.17.so00x49f8[0x60]:PERF_RECORD_MMAP229064/29064: [0x7fff0b52d000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
00x4a58[0x68]:PERF_RECORD_MMAP229064/29064: [0xffffffffff600000(0x1000) @ 0 00:00 0 0]: r-xp [vsyscall] [root@ssdandy ~]#No
PERF_RECORD_SAMPLEs.Those are only for:
[root@ssdandy ~]# perf report -D | grep
PERF_RECORD_SAMPLE| head -5
1472246565988150x4ac0[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 1 addr: 0 1472246566062700x4ae8[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 1 addr: 0 1472246566112840x4b10[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 5 addr: 0 1472246566162250x4b38[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 35 addr: 0 1472246566211520x4b60[0x28]:PERF_RECORD_SAMPLE(IP, 0x4001): 29064/29068:0xffffffffa8e5b568period: 252 addr: 0 [root@ssdandy ~]#Quoted 2 lines
[root@ssdandy ~]# perf report -D | grep
PERF_RECORD_SAMPLE| cut -d: -f3 | sort -u
29064/29068The above can somewhat be done in trace-cmd, but not fully. But that's all userspace commands, nothing with the kernel.
Quoted 7 lines
Quoted 5 lines
[root@ssdandy ~]#
Is there a way in ftrace to ask for a pid and its children? Pre-existing and and new ones the --pid specified will create after we start monitoring?
As described above, yes. :-)
Changbin, you can take from here :-)
And to reiterate, for me the value of 'perf ftrace' is to allow people used to perf to be able to switch to ftrace quickly, just changing:
perf record/top/stat/trace/report/script/etc --pid 1234
by:
perf ftrace --pid 1234
And have the tracefs ftrace knobs set up to have what is expected in terms of targets to trace as the other perf tools.
And not just --pid and --tid, but --cgroup, --cpu, etc.
i.e., 'perf ftrace' being _a_ front-end aplication to ftrace.
:-)
- Arnaldo
Re: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
On Fri, 17 Jul 2020 16:34:55 -0300
Arnaldo Carvalho de Melo <[email protected]> wrote:
Thinking a bit more, I have to ask. Does perf use the kernel when getting all the children of an existing task, or is that done only in userspace?
That is, is there a perf syscall that says "start tracing this task and all its existing children"?
Or is it done by perf user space looking at the /proc filesystem (like ps does).
I'm asking because if perf has a syscall to do that, then I probably should add a way to do that with ftrace as well. But that's really trivial, because all it would take is grabbing the task_list lock and iterating over all the children. Getting new children was the non-trivial part, which was what I focused on (with the fork options).
If perf does it with proc files, then we don't need to change anything as that could still be used with ftrace.
Quoted 11 lines
Changbin, you can take from here :-)
And to reiterate, for me the value of 'perf ftrace' is to allow people used to perf to be able to switch to ftrace quickly, just changing:
perf record/top/stat/trace/report/script/etc --pid 1234by:
perf ftrace --pid 1234
Quoted 8 lines
And have the tracefs ftrace knobs set up to have what is expected in terms of targets to trace as the other perf tools.
And not just --pid and --tid, but --cgroup, --cpu, etc.
i.e., 'perf ftrace' being _a_ front-end aplication to ftrace.
:-)
I have no problem with this, and I'm quite excited about it. I would like it to use libtracefs, as it looks to be exactly what we are working on. And this is now a high priority to get out, and I don't expect another year (or two) in doing so ;-)
-- Steve
Namhyung Kim
maintainerRe: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
Hi Steve,
Quoted 8 lines · Steven Rostedt
On Fri, 17 Jul 2020 16:34:55 -0300
Arnaldo Carvalho de Melo <[email protected]> wrote:Thinking a bit more, I have to ask. Does perf use the kernel when getting all the children of an existing task, or is that done only in userspace?
Quoted 5 lines
That is, is there a perf syscall that says "start tracing this task and all its existing children"?
Or is it done by perf user space looking at the /proc filesystem (like ps does).
Yep, perf does look up the /proc to get a list of threads in a process.
Thanks
Namhyung
Quoted 37 lines
I'm asking because if perf has a syscall to do that, then I probably should add a way to do that with ftrace as well. But that's really trivial, because all it would take is grabbing the
task_listlock and iterating over all the children. Getting new children was the non-trivial part, which was what I focused on (with the fork options).If perf does it with proc files, then we don't need to change anything as that could still be used with ftrace.
Quoted 11 lines
Changbin, you can take from here :-)
And to reiterate, for me the value of 'perf ftrace' is to allow people used to perf to be able to switch to ftrace quickly, just changing:
perf record/top/stat/trace/report/script/etc --pid 1234by:
perf ftrace --pid 1234Quoted 8 lines
And have the tracefs ftrace knobs set up to have what is expected in terms of targets to trace as the other perf tools.
And not just --pid and --tid, but --cgroup, --cpu, etc.
i.e., 'perf ftrace' being _a_ front-end aplication to ftrace.
:-)
I have no problem with this, and I'm quite excited about it. I would like it to use libtracefs, as it looks to be exactly what we are working on. And this is now a high priority to get out, and I don't expect another year (or two) in doing so ;-)
-- Steve
Re: [PATCH v5 03/17] perf ftrace: add option -t/--tid to filter by thread id
In reply to Steven RostedtQuoted 34 lines · Steven Rostedt
Quoted 31 lines · On Fri, 17 Jul 2020 21:26:50 +0800 Changbin Du <[email protected]> wrote:
Quoted 30 lines · Arnaldo Carvalho de Melo
Em Sat, Jul 11, 2020 at 08:40:21PM +0800, Changbin Du escreveu:
Quoted 13 lines
This allows us to trace single thread instead of the whole process.
Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 2 ++ 2 files changed, 6 insertions(+)tools/perf/Documentation/perf-ftrace.txt +0
-0tools/perf/Documentation/perf-ftrace.txt OPTIONS · line 44
Quoted 7 lines
tools/perf/Documentation/perf-ftrace.txt +4
-0@@ -38,6 +38,10 @@ OPTIONS --pid=:: Trace on existing process id (comma separated list). +-t:: +--tid=:: + Trace on existing thread id (comma separated list). +Humm, I just tried:
[root@five ~]# yes >
/dev/null&
[1] 18265
[root@five ~]# perf ftrace --tid 18265
^C[root@five ~]#
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
After waiting for a while, nothing, what am I doing wrong?
I got it wrong. Currently ftrace only can filter by pid. If the pid is not the main thread it won't work.
Wait what?
The "pid" for ftrace is really a "task id" which is a thread id.
My bad. I traced a sleeping thread yesterday so no event generated.
Now it works:
$ pstree -p 2378
qemu-system-x86(2378)─┬─{qemu-system-x86}(2379)
├─{qemu-system-x86}(2382)
├─{qemu-system-x86}(2385)
├─{qemu-system-x86}(2387)
├─{qemu-system-x86}(2388)
├─{qemu-system-x86}(2389)
├─{qemu-system-x86}(2390)
├─{qemu-system-x86}(2391)
├─{qemu-system-x86}(2392)
$ sudo ./perf ftrace --tid 2388
[sudo] password for changbin:
# tracer: function
#
# entries-in-buffer/entries-written: 0/0 #P:8
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [001] 6561.553989: switch_mm_irqs_off <-__schedule
<idle>-0 [001] 6561.553996: load_new_mm_cr3 <-switch_mm_irqs_off
qemu-system-x86-2388 [001] 6561.553997: finish_task_switch <-__schedule
qemu-system-x86-2388 [001] 6561.553998: smp_irq_work_interrupt <-irq_work_interrupt
qemu-system-x86-2388 [001] 6561.553999: irq_enter <-smp_irq_work_interrupt
qemu-system-x86-2388 [001] 6561.553999: rcu_irq_enter <-irq_enter
qemu-system-x86-2388 [001] 6561.554000: __wake_up <-rb_wake_up_waiters
qemu-system-x86-2388 [001] 6561.554000: __wake_up_common_lock <-__wake_up
qemu-system-x86-2388 [001] 6561.554000: _raw_spin_lock_irqsave <-__wake_up_common_lock
qemu-system-x86-2388 [001] 6561.554000: __wake_up_common <-__wake_up_common_lock
...Quoted 43 lines
[root@bxtest ~]# yes >
/dev/null&
[1] 6799
[root@bxtest ~]# trace-cmd record -e all -P 6799
Hit Ctrl^C to stop recording
^CCPU 0: 3573031 events lost
CPU0 data recorded at offset=0x838000627675136 bytes in sizeCPU1 data recorded at offset=0x25ed1000
0 bytes in size
CPU2 data recorded at offset=0x25ed1000
0 bytes in size
CPU3 data recorded at offset=0x25ed1000
0 bytes in size
CPU4 data recorded at offset=0x25ed1000
0 bytes in size
CPU5 data recorded at offset=0x25ed1000
0 bytes in size
CPU6 data recorded at offset=0x25ed1000
0 bytes in size
CPU7 data recorded at offset=0x25ed1000
0 bytes in size
[root@bxtest ~]# trace-cmd report | head
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 4 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8yes-6799 [000] 67825.580902: sys_exit: NR 1 = 8192 yes-6799 [000] 67825.580903: sys_exit_write: 0x2000What's different about tid vs pid?
-- Steve
Quoted 3 lines
So this patch makes no sense. will drop this.
Signature · 2 lines
Cheers, Changbin Du
PATCH v5 4/17 perf ftrace: factor out function write_tracing_file_int()
In reply to Changbin DuWe will reuse this function later.
--- tools/perf/builtin-ftrace.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
tools/perf/builtin-ftrace.c +12 -5
@@ -165,6 +165,17 @@ static int read_tracing_file_to_stdout(const char *name)return ret; } +static int write_tracing_file_int (const char *name,int value) +{ +char buf[16 ]; + +snprintf (buf,sizeof (buf),"%d" , value); +if (write_tracing_file (name, buf) <0 ) +return -1 ; + +return 0 ; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void );
@@ -295,8 +306,6 @@ static void reset_tracing_filters(void)static int set_tracing_depth (struct perf_ftrace *ftrace) { -char buf[16 ]; -if (ftrace->graph_depth ==0 )return 0 ;
@@ -305,9 +314,7 @@ static int set_tracing_depth(struct perf_ftrace *ftrace)return -1 ; } -snprintf (buf,sizeof (buf),"%d" , ftrace->graph_depth); - -if (write_tracing_file ("max_graph_depth" , buf) <0 ) +if (write_tracing_file_int ("max_graph_depth" , ftrace->graph_depth) <0 )return -1 ;return 0 ;
Signature · 1 line
2.25.1
PATCH v5 5/17 perf ftrace: add option '-m/--buffer-size' to set per-cpu buffer size
In reply to Changbin DuThis adds an option '-m/--buffer-size' to allow us set the size of per-cpu tracing buffer.
---
v2: support units as a suffix.
--- tools/perf/Documentation/perf-ftrace.txt | 5 +++ tools/perf/builtin-ftrace.c | 56 +++++++++++++++++++++++- 2 files changed, 60 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-ftrace.txt +5 -0
@@ -56,6 +56,11 @@ OPTIONS Ranges of CPUs are specified with -: 0-2. Default is to trace on all online CPUs. +-m:: +--buffer-size:: + Set the size of per-cpu tracing buffer, <size> is expected to + be a number with appended unit character - B/K/M/G. + -T:: --trace-funcs=:: Only trace functions given by the argument. Multiple functions
tools/perf/builtin-ftrace.c +55 -1
92 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v5 6/17 perf ftrace: show trace column header
In reply to Changbin DuThis makes perf-ftrace display column header before printing trace.
$ sudo perf ftrace
# tracer: function
#
# entries-in-buffer/entries-written: 0/0 #P:8
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<...>-9246 [006] 10726.262760: mutex_unlock <-rb_simple_write
<...>-9246 [006] 10726.262764: __fsnotify_parent <-vfs_write
<...>-9246 [006] 10726.262765: fsnotify <-vfs_write
<...>-9246 [006] 10726.262766: __sb_end_write <-vfs_write
<...>-9246 [006] 10726.262767: fpregs_assert_state_consistent <-do_syscall_64--- tools/perf/builtin-ftrace.c | 3 +++ 1 file changed, 3 insertions(+)
tools/perf/builtin-ftrace.c +3 -0
@@ -430,6 +430,9 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)fcntl (trace_fd,F_SETFL ,O_NONBLOCK ); pollfd.fd = trace_fd; +/* display column headers */ +read_tracing_file_to_stdout ("trace" ); +if (write_tracing_file ("tracing_on" ,"1" ) <0 ) {pr_err ("can't enable tracing\n" ); goto out_close_fd;
Signature · 1 line
2.25.1
PATCH v5 7/17 perf ftrace: add option '--inherit' to trace children processes
In reply to Changbin DuThis adds an option '--inherit' to allow us trace children processes spawned by our target.
---
v2: option name '--trace-children' -> '--inherit'.
--- tools/perf/Documentation/perf-ftrace.txt | 3 ++ tools/perf/builtin-ftrace.c | 38 ++++++++++++++++++++++++ 2 files changed, 41 insertions(+)
tools/perf/Documentation/perf-ftrace.txt +3 -0
@@ -61,6 +61,9 @@ OPTIONS Set the size of per-cpu tracing buffer, <size> is expected to be a number with appended unit character - B/K/M/G. +--inherit:: + Trace children processes spawned by our target. + -T:: --trace-funcs=:: Only trace functions given by the argument. Multiple functions
tools/perf/builtin-ftrace.c +38 -0
@@ -39,6 +39,7 @@ struct perf_ftrace {struct list_head nograph_funcs;int graph_depth;unsigned long percpu_buffer_size; +bool inherit; };struct filter_entry {
@@ -177,9 +178,27 @@ static int write_tracing_file_int(const char *name, int value)return 0 ; } +static int write_tracing_option_file (const char *name,const char *val) +{ +char *file; +int ret; + +if (asprintf (&file,"options/%s" , name) <0 ) +return -1 ; + + ret =__write_tracing_file (file, val, false); +free (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void ); +static void reset_tracing_options (struct perf_ftrace *ftrace__maybe_unused ) +{ +write_tracing_option_file ("function-fork" ,"0" ); +} +static int reset_tracing_files (struct perf_ftrace *ftrace__maybe_unused ) {if (write_tracing_file ("tracing_on" ,"0" ) <0 )
@@ -198,6 +217,7 @@ static int reset_tracing_files(struct perf_ftrace *ftrace __maybe_unused)return -1 ;reset_tracing_filters (); +reset_tracing_options (ftrace);return 0 ; }
@@ -336,6 +356,17 @@ static int set_tracing_percpu_buffer_size(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_trace_inherit (struct perf_ftrace *ftrace) +{ +if (!ftrace->inherit) +return 0 ; + +if (write_tracing_option_file ("function-fork" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;
@@ -405,6 +436,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_trace_inherit (ftrace) <0 ) { +pr_err ("failed to set tracing option function-fork\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;
@@ -599,6 +635,8 @@ int cmd_ftrace(int argc, const char **argv) "Max depth for function graph tracer"),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" ,"size of per cpu buffer" , parse_buffer_size), +OPT_BOOLEAN (0 ,"inherit" , &ftrace.inherit, +"trace children processes" ), OPT_END() };
Signature · 1 line
2.25.1
Namhyung Kim
maintainerRe: [PATCH v5 07/17] perf ftrace: add option '--inherit' to trace children processes
Quoted 94 lines · Changbin Du
This adds an option '--inherit' to allow us trace children processes spawned by our target.
Signed-off-by Changbin Du <[email protected]>---
v2: option name '--trace-children' -> '--inherit'.--- tools/perf/Documentation/perf-ftrace.txt | 3 ++ tools/perf/builtin-ftrace.c | 38 ++++++++++++++++++++++++ 2 files changed, 41 insertions(+)tools/perf/Documentation/perf-ftrace.txt +3
-0@@ -61,6 +61,9 @@ OPTIONS Set the size of per-cpu tracing buffer, <size> is expected to be a number with appended unit character - B/K/M/G. +--inherit:: + Trace children processes spawned by our target. + -T:: --trace-funcs=:: Only trace functions given by the argument. Multiple functionstools/perf/builtin-ftrace.c +31
-0@@ -39,6 +39,7 @@ struct perf_ftrace {struct list_head nograph_funcs;int graph_depth;unsigned long percpu_buffer_size; +bool inherit; };struct filter_entry {@@ -177,9 +178,27 @@ static int write_tracing_file_int(const char *name, int value)return 0 ; } +static int write_tracing_option_file (const char *name,const char *val) +{ +char *file; +int ret; + +if (asprintf (&file,"options/%s" , name) <0 ) +return -1 ; + + ret =__write_tracing_file (file, val, false); +free (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void ); +static void reset_tracing_options (struct perf_ftrace *ftrace__maybe_unused ) +{ +write_tracing_option_file ("function-fork" ,"0" ); +} +static int reset_tracing_files (struct perf_ftrace *ftrace__maybe_unused ) {if (write_tracing_file ("tracing_on" ,"0" ) <0 )@@ -198,6 +217,7 @@ static int reset_tracing_files(struct perf_ftrace *ftrace __maybe_unused)return -1 ;reset_tracing_filters (); +reset_tracing_options (ftrace);return 0 ; }@@ -336,6 +356,17 @@ static int set_tracing_percpu_buffer_size(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_trace_inherit (struct perf_ftrace *ftrace) +{ +if (!ftrace->inherit) +return 0 ; + +if (write_tracing_option_file ("function-fork" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;
tools/perf/builtin-ftrace.c static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) · line 442
Quoted 7 lines
tools/perf/builtin-ftrace.c +4
-0@@ -405,6 +436,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_trace_inherit (ftrace) <0 ) { +pr_err ("failed to set tracing option function-fork\n" ); + goto out_reset; + }
Can we have set_tracing_options() here instead to make the __cmd_ftrace() shorter? It'd set other options added later. It's also symmetric to reset_tracing_options().
Thanks
Namhyung
Quoted 16 lines
tools/perf/builtin-ftrace.c +3
-1+if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;@@ -599,6 +635,8 @@ int cmd_ftrace(int argc, const char **argv) "Max depth for function graph tracer"),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" ,"size of per cpu buffer" , parse_buffer_size), +OPT_BOOLEAN (0 ,"inherit" , &ftrace.inherit, +"trace children processes" ), OPT_END() }; --2.25.1
Re: [PATCH v5 07/17] perf ftrace: add option '--inherit' to trace children processes
Quoted 98 lines · Namhyung Kim
Quoted 97 lines · Changbin Du
This adds an option '--inherit' to allow us trace children processes spawned by our target.
Signed-off-by Changbin Du <[email protected]>---
v2: option name '--trace-children' -> '--inherit'.--- tools/perf/Documentation/perf-ftrace.txt | 3 ++ tools/perf/builtin-ftrace.c | 38 ++++++++++++++++++++++++ 2 files changed, 41 insertions(+)tools/perf/Documentation/perf-ftrace.txt +3
-0@@ -61,6 +61,9 @@ OPTIONS Set the size of per-cpu tracing buffer, <size> is expected to be a number with appended unit character - B/K/M/G. +--inherit:: + Trace children processes spawned by our target. + -T:: --trace-funcs=:: Only trace functions given by the argument. Multiple functionstools/perf/builtin-ftrace.c +31
-0@@ -39,6 +39,7 @@ struct perf_ftrace {struct list_head nograph_funcs;int graph_depth;unsigned long percpu_buffer_size; +bool inherit; };struct filter_entry {@@ -177,9 +178,27 @@ static int write_tracing_file_int(const char *name, int value)return 0 ; } +static int write_tracing_option_file (const char *name,const char *val) +{ +char *file; +int ret; + +if (asprintf (&file,"options/%s" , name) <0 ) +return -1 ; + + ret =__write_tracing_file (file, val, false); +free (file); +return ret; +} +static int reset_tracing_cpu (void );static void reset_tracing_filters (void ); +static void reset_tracing_options (struct perf_ftrace *ftrace__maybe_unused ) +{ +write_tracing_option_file ("function-fork" ,"0" ); +} +static int reset_tracing_files (struct perf_ftrace *ftrace__maybe_unused ) {if (write_tracing_file ("tracing_on" ,"0" ) <0 )@@ -198,6 +217,7 @@ static int reset_tracing_files(struct perf_ftrace *ftrace __maybe_unused)return -1 ;reset_tracing_filters (); +reset_tracing_options (ftrace);return 0 ; }@@ -336,6 +356,17 @@ static int set_tracing_percpu_buffer_size(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_trace_inherit (struct perf_ftrace *ftrace) +{ +if (!ftrace->inherit) +return 0 ; + +if (write_tracing_option_file ("function-fork" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;@@ -405,6 +436,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; }
Quoted 9 lines
tools/perf/builtin-ftrace.c static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) · line 442
Quoted 4 lines
tools/perf/builtin-ftrace.c +4
-0+if (set_tracing_trace_inherit (ftrace) <0 ) { +pr_err ("failed to set tracing option function-fork\n" ); + goto out_reset; + }Can we have
set_tracing_options()here instead to make the__cmd_ftrace()shorter? It'd set other options added later. It's also symmetric toreset_tracing_options().
I appended a patch to do this. Thanks for your suggestion.
Quoted 19 lines
Thanks
NamhyungQuoted 16 lines
tools/perf/builtin-ftrace.c +3
-1+if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;@@ -599,6 +635,8 @@ int cmd_ftrace(int argc, const char **argv) "Max depth for function graph tracer"),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" ,"size of per cpu buffer" , parse_buffer_size), +OPT_BOOLEAN (0 ,"inherit" , &ftrace.inherit, +"trace children processes" ), OPT_END() }; --2.25.1
Signature · 2 lines
Cheers, Changbin Du
PATCH v5 8/17 perf: util: add general function to parse sublevel options
In reply to Changbin DuThis factors out a general function perf_parse_sublevel_options() to parse sublevel options. The 'sublevel' options is something like the '--debug' options which allow more sublevel options.
---
v2: add util/parse-sublevel-options.c
--- tools/perf/util/Build | 1 + tools/perf/util/debug.c | 61 ++++++--------------- tools/perf/util/parse-sublevel-options.c | 70 ++++++++++++++++++++++++ tools/perf/util/parse-sublevel-options.h | 11 ++++ 4 files changed, 99 insertions(+), 44 deletions(-) create mode 100644 tools/perf/util/parse-sublevel-options.c create mode 100644 tools/perf/util/parse-sublevel-options.h
tools/perf/util/Build +1 -0
@@ -117,6 +117,7 @@ endif perf-y += parse-branch-options.o perf-y += dump-insn.o perf-y += parse-regs-options.o +perf-y += parse-sublevel-options.o perf-y += term.o perf-y += help-unknown-cmd.o perf-y += mem-events.o
tools/perf/util/debug.c +17 -44
88 lines not on this page · raw message
tools/perf/util/parse-sublevel-options.c new file +70 -0
70 lines not on this page · raw message
tools/perf/util/parse-sublevel-options.h new file +11 -0
@@ -0,0 +1,11 @@ +#ifndef _PERF_PARSE_SUBLEVEL_OPTIONS_H +#define _PERF_PARSE_SUBLEVEL_OPTIONS_H + +struct sublevel_option { +const char *name; +int *value_ptr; +}; + +int perf_parse_sublevel_options (const char *str,struct sublevel_option *opts); + +#endif
Signature · 1 line
2.25.1
PATCH v5 9/17 perf ftrace: add support for tracing option 'func_stack_trace'
In reply to Changbin DuThis adds support to display call trace for function tracer. To do this, just specify a '--func-opts call-graph' option.
$ sudo perf ftrace -T vfs_read --func-opts call-graph iio-sensor-prox-855 [003] 6168.369657: vfs_read <-ksys_read iio-sensor-prox-855 [003] 6168.369677: <stack trace> => vfs_read => ksys_read => __x64_sys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe ...
---
v3: switch to uniform option --func-opts.
v2: option name '-s' -> '--func-call-graph'
--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 42 ++++++++++++++++++++++++ 2 files changed, 46 insertions(+)
tools/perf/Documentation/perf-ftrace.txt +4 -0
@@ -78,6 +78,10 @@ OPTIONS (or glob patterns). It will be passed to 'set_ftrace_notrace' in tracefs. +--func-opts:: + List of options allowed to set: + call-graph - Display kernel stack trace for function tracer. + -G:: --graph-funcs=:: Set graph filter on the given function (or a glob pattern).
tools/perf/builtin-ftrace.c +42 -0
84 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v5 10/17 perf ftrace: add support for trace option sleep-time
In reply to Changbin DuThis adds an option '--graph-opts nosleep-time' which allow us only to measure on-CPU time. This option is function_graph tracer only.
---
v3: switch to uniform option --graph-opts.
v2: option name '--nosleep-time' -> '--graph-nosleep-time'.
--- tools/perf/Documentation/perf-ftrace.txt | 4 +++ tools/perf/builtin-ftrace.c | 41 ++++++++++++++++++++++++ 2 files changed, 45 insertions(+)
tools/perf/Documentation/perf-ftrace.txt +4 -0
@@ -102,6 +102,10 @@ OPTIONS --graph-depth=:: Set max depth for function graph tracer to follow +--graph-opts:: + List of options allowed to set: + nosleep-time - Measure on-CPU time only for function_graph tracer. + SEE ALSO -------- linkperf:perf-record[1], linkperf:perf-trace[1]
tools/perf/builtin-ftrace.c +41 -0
77 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v5 11/17 perf ftrace: add support for trace option funcgraph-irqs
In reply to Changbin DuThis adds an option '--graph-opts noirqs' to filter out functions executed in irq context.
---
v2: option name '--nofuncgraph-irqs' -> '--graph-noirqs'.
--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-ftrace.txt +1 -0
@@ -105,6 +105,7 @@ OPTIONS --graph-opts:: List of options allowed to set: nosleep-time - Measure on-CPU time only for function_graph tracer. + noirqs - Ignore functions that happen inside interrupt. SEE ALSO --------
tools/perf/builtin-ftrace.c +20 -1
@@ -43,6 +43,7 @@ struct perf_ftrace {bool inherit;int func_stack_trace;int graph_nosleep_time; +int graph_noirqs; };struct filter_entry {
@@ -202,6 +203,7 @@ static void reset_tracing_options(struct perf_ftrace *ftrace __maybe_unused)write_tracing_option_file ("function-fork" ,"0" );write_tracing_option_file ("func_stack_trace" ,"0" );write_tracing_option_file ("sleep-time" ,"1" ); +write_tracing_option_file ("funcgraph-irqs" ,"1" ); }static int reset_tracing_files (struct perf_ftrace *ftrace__maybe_unused )
@@ -394,6 +396,17 @@ static int set_tracing_sleep_time(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_funcgraph_irqs (struct perf_ftrace *ftrace) +{ +if (!ftrace->graph_noirqs) +return 0 ; + +if (write_tracing_option_file ("funcgraph-irqs" ,"0" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;
@@ -478,6 +491,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_funcgraph_irqs (ftrace) <0 ) { +pr_err ("failed to set tracing option funcgraph-irqs\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;
@@ -658,6 +676,7 @@ static int parse_graph_tracer_opts(const struct option *opt,struct perf_ftrace *ftrace = (struct perf_ftrace *) opt->value;struct sublevel_option graph_tracer_opts[] = { { .name ="nosleep-time" , .value_ptr = &ftrace->graph_nosleep_time }, + { .name ="noirqs" , .value_ptr = &ftrace->graph_noirqs }, { .name =NULL , } };
@@ -714,7 +733,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth,"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time" , +"graph tracer options, available options: nosleep-time,noirqs" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size),
Signature · 1 line
2.25.1
PATCH v5 12/17 perf ftrace: add support for tracing option 'irq-info'
In reply to Changbin DuThis adds support to display irq context info for function tracer. To do this, just specify a '--func-opts irq-info' option.
--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-ftrace.txt +1 -0
@@ -81,6 +81,7 @@ OPTIONS --func-opts:: List of options allowed to set: call-graph - Display kernel stack trace for function tracer. + irq-info - Display irq context info for function tracer. -G:: --graph-funcs=::
tools/perf/builtin-ftrace.c +20 -1
@@ -42,6 +42,7 @@ struct perf_ftrace {unsigned long percpu_buffer_size;bool inherit;int func_stack_trace; +int func_irq_info;int graph_nosleep_time;int graph_noirqs; };
@@ -204,6 +205,7 @@ static void reset_tracing_options(struct perf_ftrace *ftrace __maybe_unused)write_tracing_option_file ("func_stack_trace" ,"0" );write_tracing_option_file ("sleep-time" ,"1" );write_tracing_option_file ("funcgraph-irqs" ,"1" ); +write_tracing_option_file ("irq-info" ,"0" ); }static int reset_tracing_files (struct perf_ftrace *ftrace__maybe_unused )
@@ -291,6 +293,17 @@ static int set_tracing_func_stack_trace(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_func_irqinfo (struct perf_ftrace *ftrace) +{ +if (!ftrace->func_irq_info) +return 0 ; + +if (write_tracing_option_file ("irq-info" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int reset_tracing_cpu (void ) {struct perf_cpu_map *cpumap =perf_cpu_map__new (NULL );
@@ -466,6 +479,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_func_irqinfo (ftrace) <0 ) { +pr_err ("failed to set tracing option irq-info\n" ); + goto out_reset; + } +if (set_tracing_filters (ftrace) <0 ) {pr_err ("failed to set tracing filters\n" ); goto out_reset;
@@ -656,6 +674,7 @@ static int parse_func_tracer_opts(const struct option *opt,struct perf_ftrace *ftrace = (struct perf_ftrace *) opt->value;struct sublevel_option func_tracer_opts[] = { { .name ="call-graph" , .value_ptr = &ftrace->func_stack_trace }, + { .name ="irq-info" , .value_ptr = &ftrace->func_irq_info }, { .name =NULL , } };
@@ -723,7 +742,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_CALLBACK ('N' ,"notrace-funcs" , &ftrace.notrace,"func" ,"do not trace given functions" , parse_filter_func),OPT_CALLBACK (0 ,"func-opts" , &ftrace,"options" , -"function tracer options, available options: call-graph" , +"function tracer options, available options: call-graph,irq-info" , parse_func_tracer_opts), OPT_CALLBACK('G', "graph-funcs", &ftrace.graph_funcs, "func", "trace given functions using function_graph tracer",
Signature · 1 line
2.25.1
PATCH v5 13/17 perf ftrace: add option 'verbose' to show more info for graph tracer
In reply to Changbin DuSometimes we want ftrace display more and longer information about the trace.
$ sudo perf ftrace -G 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify();
$ sudo perf ftrace -G --graph-opts verbose
14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock();
14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent();
14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify();
14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write();
14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent();
14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() {
14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() {--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 29 +++++++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-ftrace.txt +1 -0
@@ -107,6 +107,7 @@ OPTIONS List of options allowed to set: nosleep-time - Measure on-CPU time only for function_graph tracer. noirqs - Ignore functions that happen inside interrupt. + verbose - Show process names, PIDs, timestamps, etc. SEE ALSO --------
tools/perf/builtin-ftrace.c +28 -1
@@ -45,6 +45,7 @@ struct perf_ftrace {int func_irq_info;int graph_nosleep_time;int graph_noirqs; +int graph_verbose; };struct filter_entry {
@@ -205,6 +206,9 @@ static void reset_tracing_options(struct perf_ftrace *ftrace __maybe_unused)write_tracing_option_file ("func_stack_trace" ,"0" );write_tracing_option_file ("sleep-time" ,"1" );write_tracing_option_file ("funcgraph-irqs" ,"1" ); +write_tracing_option_file ("funcgraph-proc" ,"0" ); +write_tracing_option_file ("funcgraph-abstime" ,"0" ); +write_tracing_option_file ("latency-format" ,"0" );write_tracing_option_file ("irq-info" ,"0" ); }
@@ -420,6 +424,23 @@ static int set_tracing_funcgraph_irqs(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_funcgraph_verbose (struct perf_ftrace *ftrace) +{ +if (!ftrace->graph_verbose) +return 0 ; + +if (write_tracing_option_file ("funcgraph-proc" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("funcgraph-abstime" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("latency-format" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;
@@ -514,6 +535,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_funcgraph_verbose (ftrace) <0 ) { +pr_err ("failed to set tracing option funcgraph-proc/funcgraph-abstime\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;
@@ -696,6 +722,7 @@ static int parse_graph_tracer_opts(const struct option *opt,struct sublevel_option graph_tracer_opts[] = { { .name ="nosleep-time" , .value_ptr = &ftrace->graph_nosleep_time }, { .name ="noirqs" , .value_ptr = &ftrace->graph_noirqs }, + { .name ="verbose" , .value_ptr = &ftrace->graph_verbose }, { .name =NULL , } };
@@ -752,7 +779,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth,"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time,noirqs" , +"graph tracer options, available options: nosleep-time,noirqs,verbose" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size),
Signature · 1 line
2.25.1
Namhyung Kim
maintainerRe: [PATCH v5 13/17] perf ftrace: add option 'verbose' to show more info for graph tracer
Quoted 10 lines · Changbin Du
Sometimes we want ftrace display more and longer information about the trace.
$ sudo perf ftrace -G 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify();$ sudo perf ftrace -G --graph-opts verbose
These -G option usage should be changed..
Thanks
Namhyung
Quoted 104 lines
14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock(); 14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent(); 14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify(); 14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write(); 14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent(); 14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() { 14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() {Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 29 +++++++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-)tools/perf/Documentation/perf-ftrace.txt +1
-0@@ -107,6 +107,7 @@ OPTIONS List of options allowed to set: nosleep-time - Measure on-CPU time only for function_graph tracer. noirqs - Ignore functions that happen inside interrupt. + verbose - Show process names, PIDs, timestamps, etc. SEE ALSO --------tools/perf/builtin-ftrace.c +28
-2@@ -45,6 +45,7 @@ struct perf_ftrace {int func_irq_info;int graph_nosleep_time;int graph_noirqs; +int graph_verbose; };struct filter_entry {@@ -205,6 +206,9 @@ static void reset_tracing_options(struct perf_ftrace *ftrace __maybe_unused)write_tracing_option_file ("func_stack_trace" ,"0" );write_tracing_option_file ("sleep-time" ,"1" );write_tracing_option_file ("funcgraph-irqs" ,"1" ); +write_tracing_option_file ("funcgraph-proc" ,"0" ); +write_tracing_option_file ("funcgraph-abstime" ,"0" ); +write_tracing_option_file ("latency-format" ,"0" );write_tracing_option_file ("irq-info" ,"0" ); }@@ -420,6 +424,23 @@ static int set_tracing_funcgraph_irqs(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_funcgraph_verbose (struct perf_ftrace *ftrace) +{ +if (!ftrace->graph_verbose) +return 0 ; + +if (write_tracing_option_file ("funcgraph-proc" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("funcgraph-abstime" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("latency-format" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;@@ -514,6 +535,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_funcgraph_verbose (ftrace) <0 ) { +pr_err ("failed to set tracing option funcgraph-proc/funcgraph-abstime\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;@@ -696,6 +722,7 @@ static int parse_graph_tracer_opts(const struct option *opt,struct sublevel_option graph_tracer_opts[] = { { .name ="nosleep-time" , .value_ptr = &ftrace->graph_nosleep_time }, { .name ="noirqs" , .value_ptr = &ftrace->graph_noirqs }, + { .name ="verbose" , .value_ptr = &ftrace->graph_verbose }, { .name =NULL , } };@@ -752,7 +779,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth,"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time,noirqs" , +"graph tracer options, available options: nosleep-time,noirqs,verbose" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size), --2.25.1
Re: [PATCH v5 13/17] perf ftrace: add option 'verbose' to show more info for graph tracer
Quoted 5 lines · Namhyung Kim
Quoted 4 lines · Changbin Du
Sometimes we want ftrace display more and longer information about the trace.
Quoted 9 lines
Quoted 6 lines
$ sudo perf ftrace -G 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify();$ sudo perf ftrace -G --graph-opts verboseThese -G option usage should be changed..
The commit mesge is update now. Thanks.
Quoted 108 lines
Thanks
NamhyungQuoted 104 lines
14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock(); 14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent(); 14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify(); 14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write(); 14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent(); 14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() { 14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() {Signed-off-by Changbin Du <[email protected]>--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 29 +++++++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-)tools/perf/Documentation/perf-ftrace.txt +1
-0@@ -107,6 +107,7 @@ OPTIONS List of options allowed to set: nosleep-time - Measure on-CPU time only for function_graph tracer. noirqs - Ignore functions that happen inside interrupt. + verbose - Show process names, PIDs, timestamps, etc. SEE ALSO --------tools/perf/builtin-ftrace.c +28
-2@@ -45,6 +45,7 @@ struct perf_ftrace {int func_irq_info;int graph_nosleep_time;int graph_noirqs; +int graph_verbose; };struct filter_entry {@@ -205,6 +206,9 @@ static void reset_tracing_options(struct perf_ftrace *ftrace __maybe_unused)write_tracing_option_file ("func_stack_trace" ,"0" );write_tracing_option_file ("sleep-time" ,"1" );write_tracing_option_file ("funcgraph-irqs" ,"1" ); +write_tracing_option_file ("funcgraph-proc" ,"0" ); +write_tracing_option_file ("funcgraph-abstime" ,"0" ); +write_tracing_option_file ("latency-format" ,"0" );write_tracing_option_file ("irq-info" ,"0" ); }@@ -420,6 +424,23 @@ static int set_tracing_funcgraph_irqs(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_funcgraph_verbose (struct perf_ftrace *ftrace) +{ +if (!ftrace->graph_verbose) +return 0 ; + +if (write_tracing_option_file ("funcgraph-proc" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("funcgraph-abstime" ,"1" ) <0 ) +return -1 ; + +if (write_tracing_option_file ("latency-format" ,"1" ) <0 ) +return -1 ; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;@@ -514,6 +535,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_funcgraph_verbose (ftrace) <0 ) { +pr_err ("failed to set tracing option funcgraph-proc/funcgraph-abstime\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;@@ -696,6 +722,7 @@ static int parse_graph_tracer_opts(const struct option *opt,struct sublevel_option graph_tracer_opts[] = { { .name ="nosleep-time" , .value_ptr = &ftrace->graph_nosleep_time }, { .name ="noirqs" , .value_ptr = &ftrace->graph_noirqs }, + { .name ="verbose" , .value_ptr = &ftrace->graph_verbose }, { .name =NULL , } };@@ -752,7 +779,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth,"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time,noirqs" , +"graph tracer options, available options: nosleep-time,noirqs,verbose" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size), --2.25.1
Signature · 2 lines
Cheers, Changbin Du
PATCH v5 14/17 perf ftrace: add support for trace option tracing_thresh
In reply to Changbin DuThis adds an option '--graph-opts thresh' to setup trace duration threshold for funcgraph tracer.
$ sudo ./perf ftrace -G --graph-opts thresh=100 3) ! 184.060 us | } /* schedule */ 3) ! 185.600 us | } /* exit_to_usermode_loop */ 2) ! 225.989 us | } /* schedule_idle */ 2) # 4140.051 us | } /* do_idle */
--- tools/perf/Documentation/perf-ftrace.txt | 1 + tools/perf/builtin-ftrace.c | 26 +++++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-ftrace.txt +1 -0
@@ -108,6 +108,7 @@ OPTIONS nosleep-time - Measure on-CPU time only for function_graph tracer. noirqs - Ignore functions that happen inside interrupt. verbose - Show process names, PIDs, timestamps, etc. + thresh=<n> - Setup trace duration threshold in microseconds. SEE ALSO --------
tools/perf/builtin-ftrace.c +25 -1
@@ -46,6 +46,7 @@ struct perf_ftrace {int graph_nosleep_time;int graph_noirqs;int graph_verbose; +int graph_thresh; };struct filter_entry {
@@ -229,6 +230,9 @@ static int reset_tracing_files(struct perf_ftrace *ftrace __maybe_unused)if (write_tracing_file ("max_graph_depth" ,"0" ) <0 )return -1 ; +if (write_tracing_file ("tracing_thresh" ,"0" ) <0 ) +return -1 ; +reset_tracing_filters ();reset_tracing_options (ftrace);return 0 ;
@@ -441,6 +445,20 @@ static int set_tracing_funcgraph_verbose(struct perf_ftrace *ftrace)return 0 ; } +static int set_tracing_thresh (struct perf_ftrace *ftrace) +{ +int ret; + +if (ftrace->graph_thresh ==0 ) +return 0 ; + + ret =write_tracing_file_int ("tracing_thresh" , ftrace->graph_thresh); +if (ret <0 ) +return ret; + +return 0 ; +} +static int __cmd_ftrace (struct perf_ftrace *ftrace,int argc,const char **argv) {char *trace_file;
@@ -540,6 +558,11 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv) goto out_reset; } +if (set_tracing_thresh (ftrace) <0 ) { +pr_err ("failed to set tracing thresh\n" ); + goto out_reset; + } +if (write_tracing_file ("current_tracer" , ftrace->tracer) <0 ) {pr_err ("failed to set current_tracer to %s\n" , ftrace->tracer); goto out_reset;
@@ -723,6 +746,7 @@ static int parse_graph_tracer_opts(const struct option *opt, { .name = "nosleep-time", .value_ptr = &ftrace->graph_nosleep_time }, { .name = "noirqs", .value_ptr = &ftrace->graph_noirqs }, { .name = "verbose", .value_ptr = &ftrace->graph_verbose }, + { .name = "thresh", .value_ptr = &ftrace->graph_thresh }, { .name = NULL, } };
@@ -779,7 +803,7 @@ int cmd_ftrace(int argc, const char **argv)OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth,"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time,noirqs,verbose" , +"graph tracer options, available options: nosleep-time,noirqs,verbose,thresh=<n>" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size),
Signature · 1 line
2.25.1
PATCH v5 15/17 perf: ftrace: allow set graph depth by '--graph-opts'
In reply to Changbin DuThis is to have a consistent view of all graph tracer options. The original option '--graph-depth' is marked as deprecated.
--- tools/perf/Documentation/perf-ftrace.txt | 5 +---- tools/perf/builtin-ftrace.c | 5 ++--- 2 files changed, 3 insertions(+), 7 deletions(-)
tools/perf/Documentation/perf-ftrace.txt +1 -4
@@ -99,16 +99,13 @@ OPTIONS This can be used more than once to specify multiple functions. It will be passed to 'set_graph_notrace' in tracefs. --D:: ---graph-depth=:: - Set max depth for function graph tracer to follow - --graph-opts:: List of options allowed to set: nosleep-time - Measure on-CPU time only for function_graph tracer. noirqs - Ignore functions that happen inside interrupt. verbose - Show process names, PIDs, timestamps, etc. thresh=<n> - Setup trace duration threshold in microseconds. + depth=<n> - Set max depth for function graph tracer to follow. SEE ALSO --------
tools/perf/builtin-ftrace.c +2 -3
@@ -747,6 +747,7 @@ static int parse_graph_tracer_opts(const struct option *opt, { .name = "noirqs", .value_ptr = &ftrace->graph_noirqs }, { .name = "verbose", .value_ptr = &ftrace->graph_verbose }, { .name = "thresh", .value_ptr = &ftrace->graph_thresh }, + { .name = "depth", .value_ptr = &ftrace->graph_depth }, { .name = NULL, } };
@@ -800,10 +801,8 @@ int cmd_ftrace(int argc, const char **argv) parse_filter_func),OPT_CALLBACK ('g' ,"nograph-funcs" , &ftrace.nograph_funcs,"func" ,"Set nograph filter on given functions" , parse_filter_func), -OPT_INTEGER ('D' ,"graph-depth" , &ftrace.graph_depth, -"Max depth for function graph tracer" ),OPT_CALLBACK (0 ,"graph-opts" , &ftrace,"options" , -"graph tracer options, available options: nosleep-time,noirqs,verbose,thresh=<n>" , +"graph tracer options, available options: nosleep-time,noirqs,verbose,thresh=<n>,depth=<n>" , parse_graph_tracer_opts),OPT_CALLBACK ('m' ,"buffer-size" , &ftrace.percpu_buffer_size,"size" , "size of per cpu buffer", parse_buffer_size),
Signature · 1 line
2.25.1
PATCH v5 16/17 perf ftrace: add option -D/--delay to delay tracing
In reply to Changbin DuThis adds an option '-D/--delay' to allow us to start tracing some times later after workload is launched.
--- tools/perf/Documentation/perf-ftrace.txt | 4 ++++ tools/perf/builtin-ftrace.c | 19 ++++++++++++++++--- 2 files changed, 20 insertions(+), 3 deletions(-)
tools/perf/Documentation/perf-ftrace.txt +4 -0
@@ -42,6 +42,10 @@ OPTIONS --tid=:: Trace on existing thread id (comma separated list). +-D:: +--delay:: + Time (ms) to wait before starting tracing after program start. + -a:: --all-cpus:: Force system-wide collection. Scripts run without a <command>
tools/perf/builtin-ftrace.c +16 -3
@@ -47,6 +47,7 @@ struct perf_ftrace {int graph_noirqs;int graph_verbose;int graph_thresh; +unsigned int initial_delay; };struct filter_entry {
@@ -591,13 +592,23 @@ static int __cmd_ftrace(struct perf_ftrace *ftrace, int argc, const char **argv)/* display column headers */ read_tracing_file_to_stdout ("trace" ); -if (write_tracing_file ("tracing_on" ,"1" ) <0 ) { -pr_err ("can't enable tracing\n" ); - goto out_close_fd; +if (!ftrace->initial_delay) { +if (write_tracing_file ("tracing_on" ,"1" ) <0 ) { +pr_err ("can't enable tracing\n" ); + goto out_close_fd; + } }perf_evlist__start_workload (ftrace->evlist); +if (ftrace->initial_delay) { +usleep (ftrace->initial_delay *1000 ); +if (write_tracing_file ("tracing_on" ,"1" ) <0 ) { +pr_err ("can't enable tracing\n" ); + goto out_close_fd; + } + } +while (!done) {if (poll (&pollfd,1 ,-1 ) <0 )break ;
@@ -808,6 +819,8 @@ int cmd_ftrace(int argc, const char **argv) "size of per cpu buffer", parse_buffer_size),OPT_BOOLEAN (0 ,"inherit" , &ftrace.inherit,"trace children processes" ), +OPT_UINTEGER ('D' ,"delay" , &ftrace.initial_delay, +"ms to wait before starting tracing after program start" ), OPT_END() };
Signature · 1 line
2.25.1
PATCH v5 17/17 perf ftrace: add change log
In reply to Changbin DuAdd a change log after previous enhancements.
--- tools/perf/builtin-ftrace.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/builtin-ftrace.c +1 -0
@@ -3,6 +3,7 @@* builtin-ftrace.c * * Copyright (c) 2013 LG Electronics, Namhyung Kim <[email protected]> +* Copyright (c) 2020 Changbin Du <[email protected]>, significant enhancement. */ #include "builtin.h"
Signature · 1 line
2.25.1