package/edk2-aarch64-bin: new package
PATCH 1/4 package/edk2-aarch64-bin: new package
Linaro provide pre-built versions of the binary firmware images of UEFI [1] based on the TianoCore edk2 project [2].
The qemu_aarch64_virt_defconfig will be updated by a follow up commit to use those firmware to test Aarch64 efi system under Qemu.
Building edk2 firmware from source require to build edk2 package for the host using a script based buildsystem. Instead we use firmware provided by Linaro to avoid the maintainance burden. There is a limited added value to build them just for Qemu testing purpose.
Building edk2 firmware could be intersting for secure boot or for other target than Qemu.
We need to package the edk2 Aarch64 and ARM firmware in two separate packages since the downloaded files are using the same name (QEMU_EFI.fd and QEMU_VARS.fd). The ARM firmware will be added by a follow up patch.
[1] http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/
[2] https://github.com/tianocore/edk2
--- DEVELOPERS | 1 + package/Config.in.host | 1 + package/edk2-aarch64-bin/Config.in.host | 12 ++++++++++ .../edk2-aarch64-bin/edk2-aarch64-bin.hash | 3 +++ package/edk2-aarch64-bin/edk2-aarch64-bin.mk | 24 +++++++++++++++++++ 5 files changed, 41 insertions(+) create mode 100644 package/edk2-aarch64-bin/Config.in.host create mode 100644 package/edk2-aarch64-bin/edk2-aarch64-bin.hash create mode 100644 package/edk2-aarch64-bin/edk2-aarch64-bin.mk
DEVELOPERS +1 -0
@@ -2191,6 +2191,7 @@ F: package/binutils/ F: package/bullet/ F: package/clang/ F: package/clinfo/ +F: package/edk2-aarch64-bin/ F: package/efl/ F: package/enet/ F: package/enlightenment/
package/Config.in.host +1 -0
@@ -18,6 +18,7 @@ menu "Host utilities" source "package/dtc/Config.in.host" source "package/e2fsprogs/Config.in.host" source "package/e2tools/Config.in.host" + source "package/edk2-aarch64-bin/Config.in.host" source "package/erofs-utils/Config.in.host" source "package/eudev/Config.in.host" source "package/exfatprogs/Config.in.host"
package/edk2-aarch64-bin/Config.in.host new file +12 -0
@@ -0,0 +1,12 @@ +config BR2_PACKAGE_HOST_EDK2_AARCH64_BIN + bool "host-edk2-aarch64-bin" + depends on BR2_aarch64 + help + This package will install pre-built versions of the binary + firmware images of UEFI based on the TianoCore project. + + This image is intended to be used by host-qemu to boot UEFI + images for Aarch64 target. + + https://github.com/tianocore/edk2 + http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/
package/edk2-aarch64-bin/edk2-aarch64-bin.hash new file +3 -0
@@ -0,0 +1,3 @@ +# From http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/release/qemu-aarch64/SHA256SUMS +sha256 43301ef5f620945a082c5f47ae933e154e0cff0976ed22a8cff66033020f6020 QEMU_EFI.fd +sha256 8b634c1e6bd11607850b69111f6c4dbd1583dbbd1460dac72dbacbdc1a4a130a QEMU_VARS.fd
package/edk2-aarch64-bin/edk2-aarch64-bin.mk new file +24 -0
@@ -0,0 +1,24 @@ +################################################################################ +# +# edk2-aarch64-bin +# +################################################################################ + +EDK2_AARCH64_BIN_VERSION = 19.03 +EDK2_AARCH64_BIN_SITE = http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/$(EDK2_AARCH64_BIN_VERSION)/release/qemu-aarch64 +EDK2_AARCH64_BIN_LICENSE = BSD-2-Clause (edk2), ISC (uefi-tools), BSD-3-Clause (ATF) + +HOST_EDK2_AARCH64_BIN_SOURCE = QEMU_EFI.fd +HOST_EDK2_AARCH64_BIN_EXTRA_DOWNLOADS = $(EDK2_AARCH64_BIN_SITE)/QEMU_VARS.fd + +define HOST_EDK2_AARCH64_BIN_EXTRACT_CMDS + cp $(HOST_EDK2_AARCH64_BIN_DL_DIR)/QEMU_EFI.fd $(@D)/QEMU_EFI.fd + cp $(HOST_EDK2_AARCH64_BIN_DL_DIR)/QEMU_VARS.fd $(@D)/QEMU_VARS.fd +endef + +define HOST_EDK2_AARCH64_BIN_INSTALL_CMDS + $(INSTALL) -D -m 644 $(@D)/QEMU_EFI.fd $(HOST_DIR)/usr/share/edk2/aarch64/QEMU_EFI.fd + $(INSTALL) -D -m 644 $(@D)/QEMU_VARS.fd $(HOST_DIR)/usr/share/edk2/aarch64/QEMU_VARS.fd +endef + +$(eval $(host-generic-package))
Signature · 1 line
2.25.4
PATCH 2/4 board/qemu/aarch64-virt/linux.config: enable ACPI
The Qemu aarch64 support ACPI Generic Event Device (GED) for device memory cold/hot plug with ACPI boot [1].
ACPI support is required to allow booting the kernel in efi mode with grub bootloader.
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=cff51ac978c4fa0b3d0de0fd62d772d9003f123e
--- board/qemu/aarch64-virt/linux.config | 1 + 1 file changed, 1 insertion(+)
board/qemu/aarch64-virt/linux.config +1 -0
@@ -9,6 +9,7 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_COMPAT=y CONFIG_FW_CFG_SYSFS=y CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_ACPI=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_BLK_DEV_BSGLIB=y
Signature · 1 line
2.25.4
PATCH 3/4 configs/qemu_aarch64_virt_defconfig: boot with grub bootloader with efi
In reply to Romain NaourThe current qemu_aarch64_virt_defconfig boot with just the kernel, so ACPI tables are missing and the plug and play support is disabled.
dmesg:
ACPI: Interpreter disabled.
[...]
pnp: PnP ACPI: disabled
The ACPI support is already available in the kernel defconfig, the memory hotplug support will be added by the next patch.
Borrow the post image script, genimage and bootloader configuration from aarch64_efi_defconfig to build the disk image used to boot the system in efi mode.
As a side effect, the bootloader grub2 is now runtime tested in the Buildroot gitlab-ci while testing this defconfig.
--- board/qemu/aarch64-virt/genimage-efi.cfg | 30 +++++++++++++++++++++++ board/qemu/aarch64-virt/grub.cfg | 6 +++++ board/qemu/aarch64-virt/post-image-efi.sh | 11 +++++++++ board/qemu/aarch64-virt/readme.txt | 2 +- configs/qemu_aarch64_virt_defconfig | 19 +++++++++++++- 5 files changed, 66 insertions(+), 2 deletions(-) create mode 100644 board/qemu/aarch64-virt/genimage-efi.cfg create mode 100644 board/qemu/aarch64-virt/grub.cfg create mode 100755 board/qemu/aarch64-virt/post-image-efi.sh
board/qemu/aarch64-virt/genimage-efi.cfg new file +30 -0
@@ -0,0 +1,30 @@ +image efi-part.vfat { + vfat { + file startup.nsh { + image = "efi-part/startup.nsh" + } + file EFI { + image = "efi-part/EFI" + } + file Image { + image = "Image" + } + } + size = 32M +} + +image disk.img { + + hdimage { + } + + partition boot { + partition-type = 0xEF + image = "efi-part.vfat" + } + + partition root { + partition-type = 0x83 + image = "rootfs.ext2" + } +}
board/qemu/aarch64-virt/grub.cfg new file +6 -0
@@ -0,0 +1,6 @@ +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /Image root=/dev/vda2 rootwait console=ttyAMA0 +}
board/qemu/aarch64-virt/post-image-efi.sh new file +11 -0
@@ -0,0 +1,11 @@ +#!/bin/sh + +set -e + +BOARD_DIR="$(dirname $0)" + +cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg + +support/scripts/genimage.sh -c "${BOARD_DIR}/genimage-efi.cfg" + +cp ${HOST_DIR}/usr/share/edk2/aarch64/QEMU_EFI.fd ${BINARIES_DIR}/QEMU_EFI.fd
board/qemu/aarch64-virt/readme.txt +1 -1
@@ -1,5 +1,5 @@ Run the emulation with: - qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig + qemu-system-aarch64 -M virt -m 512 -cpu cortex-a53 -nographic -smp 1 -bios output/images/QEMU_EFI.fd -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/disk.img,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig The login prompt will appear in the terminal that started Qemu.
configs/qemu_aarch64_virt_defconfig +18 -1
@@ -2,17 +2,30 @@ BR2_aarch64=y BR2_cortex_a53=y +# Toolchain, required for eudev and grub +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y + # System BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y + +## Required tools to create bootable media +BR2_PACKAGE_HOST_GENIMAGE=y + +# Bootloader +BR2_TARGET_GRUB2=y +BR2_TARGET_GRUB2_ARM64_EFI=y +BR2_PACKAGE_HOST_EDK2_AARCH64_BIN=y # Filesystem BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set # Image -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/aarch64-virt/post-image-efi.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" # Linux headers same as kernel, a 5.4 series
@@ -26,6 +39,10 @@ BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +# Host tools for genimage +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_MTOOLS=y + # host-qemu for gitlab testing BR2_PACKAGE_HOST_QEMU=y BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
Signature · 1 line
2.25.4
PATCH 3/4 configs/qemu_aarch64_virt_defconfig: boot with grub bootloader with efi
Hello,
Quoted 11 lines · On Sun, 12 Jul 2020 18:34:21 +0200 Romain Naour <[email protected]> wrote:
The current
qemu_aarch64_virt_defconfigboot with just the kernel, so ACPI tables are missing and the plug and play support is disabled.dmesg:
ACPI: Interpreter disabled.
[...]
pnp: PnP ACPI: disabledThe ACPI support is already available in the kernel defconfig, the memory hotplug support will be added by the next patch.
Quoted 8 lines
Borrow the post image script, genimage and bootloader configuration from
aarch64_efi_defconfigto build the disk image used to boot the system in efi mode.As a side effect, the bootloader grub2 is now runtime tested in the Buildroot gitlab-ci while testing this defconfig.
Signed-off-by Romain Naour <[email protected]>
But isn't this making qemu_aarch64_virt_defconfig too similar to aarch64_efi_defconfig ?
Shouldn't we keep qemu_aarch64_virt_defconfig as-is, and simply add runtime testing for aarch64_efi_defconfig ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 3/4 configs/qemu_aarch64_virt_defconfig: boot with grub bootloader with efi
Hello Thomas,
Le 12/07/2020 ? 21:28, Thomas Petazzoni a ?crit?:
Quoted 20 lines
Hello,
Quoted 15 lines · On Sun, 12 Jul 2020 18:34:21 +0200 Romain Naour <[email protected]> wrote:
The current
qemu_aarch64_virt_defconfigboot with just the kernel, so ACPI tables are missing and the plug and play support is disabled.dmesg:
ACPI: Interpreter disabled.
[...]
pnp: PnP ACPI: disabledThe ACPI support is already available in the kernel defconfig, the memory hotplug support will be added by the next patch.
Borrow the post image script, genimage and bootloader configuration from
aarch64_efi_defconfigto build the disk image used to boot the system in efi mode.
Quoted 7 lines
Quoted 4 lines
As a side effect, the bootloader grub2 is now runtime tested in the Buildroot gitlab-ci while testing this defconfig.
Signed-off-by Romain Naour <[email protected]>But isn't this making
qemu_aarch64_virt_defconfigtoo similar toaarch64_efi_defconfig?
Well, that why I suggested to merge the two defconfig. But I'm fine having two defconfig for different purpose.
Quoted 3 lines
Shouldn't we keep
qemu_aarch64_virt_defconfigas-is, and simply add runtime testing foraarch64_efi_defconfig?
I would like to continue enabling features in the qemu_aarch64_virt_defconfig and some of them require ACPI support. That is why I borrowed the post-image script, grub defconfig from aarch64_efi_defconfig and packaged the edk2-bin.
If we start enabling qemu runtime testing for other defconfig that the one named qemu_* we could continue (for example) test the nitrogen6x_defconfig with qemu-system-arm -M sabrelite. This can be interesting :)
For now, I would like to focus on qemu_* defconfigs.
Best regards,
Romain
Quoted 3 lines
Thomas
PATCH 4/4 board/qemu/aarch64-virt/linux.config: enable memory hotplug
In reply to Romain NaourTo test memory hotplug [1], add -m 1G,slots=3,maxmem=4G to the qemu command line, boot the system and enter the following command in the Qemu monitor to add another 1GB to the guest:
(use ctrl+a c to switch from the serial port and Qemu monitor):
(qemu) object_add memory-backend-ram,id=mem1,size=1G (qemu) device_add pc-dimm,id=dimm1,memdev=mem1
--- board/qemu/aarch64-virt/linux.config | 5 +++++ 1 file changed, 5 insertions(+)
board/qemu/aarch64-virt/linux.config +5 -0
@@ -10,10 +10,13 @@ CONFIG_COMPAT=y CONFIG_FW_CFG_SYSFS=y CONFIG_FW_CFG_SYSFS_CMDLINE=y CONFIG_ACPI=y +CONFIG_ACPI_HOTPLUG_MEMORY=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BINFMT_MISC=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_NET=y CONFIG_PACKET=y
@@ -27,6 +30,8 @@ CONFIG_BRIDGE=m CONFIG_NET_SCHED=y CONFIG_VSOCKETS=y CONFIG_PCI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_PCI_HOST_GENERIC=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y
Signature · 1 line
2.25.4
PATCH 4/4 board/qemu/aarch64-virt/linux.config: enable memory hotplug
Quoted 11 lines · On Sun, 12 Jul 2020 18:34:22 +0200 Romain Naour <[email protected]> wrote:
To test memory hotplug [1], add -m 1G,slots=3,maxmem=4G to the qemu command line, boot the system and enter the following command in the Qemu monitor to add another 1GB to the guest:
(use ctrl+a c to switch from the serial port and Qemu monitor):(qemu)
object_addmemory-backend-ram,id=mem1,size=1G (qemu)device_addpc-dimm,id=dimm1,memdev=mem1Signed-off-by Romain Naour <[email protected]>
Is this really something we want to enable in a defconfig ? It feels like a very advanced/specific feature, not really relevant for a demo/test defconfig IMO.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 4/4 board/qemu/aarch64-virt/linux.config: enable memory hotplug
Hi Thomas,
Le 12/07/2020 ? 21:27, Thomas Petazzoni a ?crit?:
Quoted 11 lines
Quoted 8 lines · On Sun, 12 Jul 2020 18:34:22 +0200 Romain Naour <[email protected]> wrote:
To test memory hotplug [1], add -m 1G,slots=3,maxmem=4G to the qemu command line, boot the system and enter the following command in the Qemu monitor to add another 1GB to the guest:
(use ctrl+a c to switch from the serial port and Qemu monitor):(qemu)
object_addmemory-backend-ram,id=mem1,size=1G (qemu)device_addpc-dimm,id=dimm1,memdev=mem1
Quoted 7 lines
Quoted 3 lines
Signed-off-by Romain Naour <[email protected]>Is this really something we want to enable in a defconfig ? It feels like a very advanced/specific feature, not really relevant for a demo/test defconfig IMO.
We just the required kernel options need for memory hot-plug, the Qemu command line in the readme.txt is keep as is.
Best regards,
Romain
Quoted 3 lines
Thomas
PATCH 1/4 package/edk2-aarch64-bin: new package
In reply to Romain NaourRomain, All,
Thanks for this series.
Since then, Dick has submitted the support needed to build edk2 from source, and this has just been merged into the next branch now:
https://git.buildroot.org/buildroot/commit/?id=1074a37e783b
As such, and as discussed on IRC, I believe this old patchset of yours is no longer required, so I marked it superseded on patchwork. Thanks for your initial work on this and your feedback! :-)
Regards,
Yann E. MORIN.
On 2020-07-12 18:34 +0200, Romain Naour spake thusly:
Quoted 123 lines
Linaro provide pre-built versions of the binary firmware images of UEFI [1] based on the TianoCore edk2 project [2].
The
qemu_aarch64_virt_defconfigwill be updated by a follow up commit to use those firmware to test Aarch64 efi system under Qemu.Building edk2 firmware from source require to build edk2 package for the host using a script based buildsystem. Instead we use firmware provided by Linaro to avoid the maintainance burden. There is a limited added value to build them just for Qemu testing purpose.
Building edk2 firmware could be intersting for secure boot or for other target than Qemu.
We need to package the edk2 Aarch64 and ARM firmware in two separate packages since the downloaded files are using the same name (QEMU_EFI.fd and QEMU_VARS.fd). The ARM firmware will be added by a follow up patch.
[1] http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/
[2] https://github.com/tianocore/edk2Signed-off-by Romain Naour <[email protected]>--- DEVELOPERS | 1 + package/Config.in.host | 1 + package/edk2-aarch64-bin/Config.in.host | 12 ++++++++++ .../edk2-aarch64-bin/edk2-aarch64-bin.hash | 3 +++ package/edk2-aarch64-bin/edk2-aarch64-bin.mk | 24 +++++++++++++++++++ 5 files changed, 41 insertions(+) create mode 100644 package/edk2-aarch64-bin/Config.in.host create mode 100644 package/edk2-aarch64-bin/edk2-aarch64-bin.hash create mode 100644 package/edk2-aarch64-bin/edk2-aarch64-bin.mkDEVELOPERS +1
-0@@ -2191,6 +2191,7 @@ F: package/binutils/ F: package/bullet/ F: package/clang/ F: package/clinfo/ +F: package/edk2-aarch64-bin/ F: package/efl/ F: package/enet/ F: package/enlightenment/package/Config.in.host +1
-0@@ -18,6 +18,7 @@ menu "Host utilities" source "package/dtc/Config.in.host" source "package/e2fsprogs/Config.in.host" source "package/e2tools/Config.in.host" + source "package/edk2-aarch64-bin/Config.in.host" source "package/erofs-utils/Config.in.host" source "package/eudev/Config.in.host" source "package/exfatprogs/Config.in.host"package/edk2-aarch64-bin/Config.in.host new file +12
-0@@ -0,0 +1,12 @@ +config BR2_PACKAGE_HOST_EDK2_AARCH64_BIN + bool "host-edk2-aarch64-bin" + depends on BR2_aarch64 + help + This package will install pre-built versions of the binary + firmware images of UEFI based on the TianoCore project. + + This image is intended to be used by host-qemu to boot UEFI + images for Aarch64 target. + + https://github.com/tianocore/edk2 + http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/package/edk2-aarch64-bin/edk2-aarch64-bin.hash new file +3
-0@@ -0,0 +1,3 @@ +# From http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/19.03/release/qemu-aarch64/SHA256SUMS +sha256 43301ef5f620945a082c5f47ae933e154e0cff0976ed22a8cff66033020f6020 QEMU_EFI.fd +sha256 8b634c1e6bd11607850b69111f6c4dbd1583dbbd1460dac72dbacbdc1a4a130a QEMU_VARS.fdpackage/edk2-aarch64-bin/edk2-aarch64-bin.mk new file +24
-0@@ -0,0 +1,24 @@ +################################################################################ +# +# edk2-aarch64-bin +# +################################################################################ + +EDK2_AARCH64_BIN_VERSION = 19.03 +EDK2_AARCH64_BIN_SITE = http://releases.linaro.org/reference-platform/enterprise/firmware/open-source/$(EDK2_AARCH64_BIN_VERSION)/release/qemu-aarch64 +EDK2_AARCH64_BIN_LICENSE = BSD-2-Clause (edk2), ISC (uefi-tools), BSD-3-Clause (ATF) + +HOST_EDK2_AARCH64_BIN_SOURCE = QEMU_EFI.fd +HOST_EDK2_AARCH64_BIN_EXTRA_DOWNLOADS = $(EDK2_AARCH64_BIN_SITE)/QEMU_VARS.fd + +define HOST_EDK2_AARCH64_BIN_EXTRACT_CMDS + cp $(HOST_EDK2_AARCH64_BIN_DL_DIR)/QEMU_EFI.fd $(@D)/QEMU_EFI.fd + cp $(HOST_EDK2_AARCH64_BIN_DL_DIR)/QEMU_VARS.fd $(@D)/QEMU_VARS.fd +endef + +define HOST_EDK2_AARCH64_BIN_INSTALL_CMDS + $(INSTALL) -D -m 644 $(@D)/QEMU_EFI.fd $(HOST_DIR)/usr/share/edk2/aarch64/QEMU_EFI.fd + $(INSTALL) -D -m 644 $(@D)/QEMU_VARS.fd $(HOST_DIR)/usr/share/edk2/aarch64/QEMU_VARS.fd +endef + +$(eval $(host-generic-package))Signature · 6 lines
2.25.4 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'