IMA: Verify measurement of certificates
v5 cover IMA: Verify measurement of certificates
The IMA subsystem is capable of importing and measuring certificates. This set of patches adds tests for verifying that keys are imported and measured correctly.
Changelog:
v5
- Fix failure case of key measurement test.
v4
- Clarify documentation about required certificate.
- Fix case where multiple KEY_CHECK rules are present.
v3
- Document requirements for running the ima key tests and provide resources for generating keys.
v2
- Un-linebreak a few strings
- Enforce that some commands are available before running
- Move compute_digest function to ima_setup.sh
- Fix file permissions on ima_key.sh
- Move IMA_POLICY variable to ima_setup.sh
- Add keycheck.policy datafile
v1
- The following patchsets should be applied in that order.
- Add tests that verify measurement of keys and importing certificates.
Lachlan Sneff (2):
IMA: Add a test to verify measurment of keys
IMA: Add a test to verify importing a certificate into keyring
runtest/ima | 1 + .../kernel/security/integrity/ima/README.md | 22 ++++ .../integrity/ima/datafiles/keycheck.policy | 1 + .../security/integrity/ima/tests/ima_keys.sh | 111 ++++++++++++++++++ .../integrity/ima/tests/ima_measurements.sh | 36 +----- .../integrity/ima/tests/ima_policy.sh | 1 - .../security/integrity/ima/tests/ima_setup.sh | 35 ++++++ 7 files changed, 171 insertions(+), 36 deletions(-) create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keycheck.policy create mode 100755 testcases/kernel/security/integrity/ima/tests/ima_keys.sh
Signature · 1 line
2.25.1
PATCH v5 1/2 IMA: Add a test to verify measurment of keys
Add a testcase that verifies that the IMA subsystem has correctly measured keys added to keyrings specified in the IMA policy file.
Additionally, add support for handling a new IMA template descriptor, namely ima-buf[1], in the IMA measurement tests.
[1]: https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use
--- runtest/ima | 1 + .../integrity/ima/datafiles/keycheck.policy | 1 + .../security/integrity/ima/tests/ima_keys.sh | 71 +++++++++++++++++++ .../integrity/ima/tests/ima_measurements.sh | 36 +--------- .../integrity/ima/tests/ima_policy.sh | 1 - .../security/integrity/ima/tests/ima_setup.sh | 35 +++++++++ 6 files changed, 109 insertions(+), 36 deletions(-) create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keycheck.policy create mode 100755 testcases/kernel/security/integrity/ima/tests/ima_keys.sh
runtest/ima +1 -0
@@ -3,4 +3,5 @@ ima_measurements ima_measurements.sh ima_policy ima_policy.sh ima_tpm ima_tpm.sh ima_violations ima_violations.sh +ima_keys ima_keys.sh evm_overlay evm_overlay.sh
testcases/kernel/security/integrity/ima/datafiles/keycheck.policy new file +1 -0
@@ -0,0 +1 @@ +measure func=KEY_CHECK keyrings=.ima|.evm|.builtin_trusted_keys|.blacklist template=ima-buf
testcases/kernel/security/integrity/ima/tests/ima_keys.sh new file +71 -0
71 lines not on this page · raw message
testcases/kernel/security/integrity/ima/tests/ima_measurements.sh +1 -35
@@ -28,7 +28,7 @@ setup() # parse digest index # https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use case "$template" in - ima|ima-ng|ima-sig) DIGEST_INDEX=4 ;; + ima|ima-ng|ima-sig|ima-buf) DIGEST_INDEX=4 ;; *) # using ima_template_fmt kernel parameter local IFS="|"
@@ -46,40 +46,6 @@ setup() "Cannot find digest index (template: '$template')" } -# TODO: find support for rmd128 rmd256 rmd320 wp256 wp384 tgr128 tgr160 -compute_digest() -{ - local algorithm="$1" - local file="$2" - local digest - - digest="$(${algorithm}sum $file 2>/dev/null | cut -f1 -d ' ')" - if [ -n "$digest" ]; then - echo "$digest" - return 0 - fi - - digest="$(openssl $algorithm $file 2>/dev/null | cut -f2 -d ' ')" - if [ -n "$digest" ]; then - echo "$digest" - return 0 - fi - - # uncommon ciphers - local arg="$algorithm" - case "$algorithm" in - tgr192) arg="tiger" ;; - wp512) arg="whirlpool" ;; - esac - - digest="$(rdigest --$arg $file 2>/dev/null | cut -f1 -d ' ')" - if [ -n "$digest" ]; then - echo "$digest" - return 0 - fi - return 1 -} - ima_check() { local delimiter=':'
testcases/kernel/security/integrity/ima/tests/ima_policy.sh +0 -1
@@ -23,7 +23,6 @@ check_policy_writable() setup() { - IMA_POLICY="$IMA_DIR/policy" check_policy_writable VALID_POLICY="$TST_DATAROOT/measure.policy"
testcases/kernel/security/integrity/ima/tests/ima_setup.sh +35 -0
@@ -20,6 +20,40 @@ SYSFS="/sys" UMOUNT= TST_FS_TYPE="ext3" +# TODO: find support for rmd128 rmd256 rmd320 wp256 wp384 tgr128 tgr160 +compute_digest() +{ + local algorithm="$1" + local file="$2" + local digest + + digest="$(${algorithm}sum $file 2>/dev/null | cut -f1 -d ' ')" + if [ -n "$digest" ]; then + echo "$digest" + return 0 + fi + + digest="$(openssl $algorithm $file 2>/dev/null | cut -f2 -d ' ')" + if [ -n "$digest" ]; then + echo "$digest" + return 0 + fi + + # uncommon ciphers + local arg="$algorithm" + case "$algorithm" in + tgr192) arg="tiger" ;; + wp512) arg="whirlpool" ;; + esac + + digest="$(rdigest --$arg $file 2>/dev/null | cut -f1 -d ' ')" + if [ -n "$digest" ]; then + echo "$digest" + return 0 + fi + return 1 +} + check_ima_policy() { local policy="$1"
@@ -85,6 +119,7 @@ ima_setup() [ -d "$IMA_DIR" ] || tst_brk TCONF "IMA not enabled in kernel" ASCII_MEASUREMENTS="$IMA_DIR/ascii_runtime_measurements" BINARY_MEASUREMENTS="$IMA_DIR/binary_runtime_measurements" + IMA_POLICY="$IMA_DIR/policy" print_ima_config
Signature · 1 line
2.25.1
Re: [PATCH v5 1/2] IMA: Add a test to verify measurment of keys
Hi Lachlan, Mimi,
Quoted 5 lines
Add a testcase that verifies that the IMA subsystem has correctly measured keys added to keyrings specified in the IMA policy file.
Additionally, add support for handling a new IMA template descriptor, namely ima-buf[1], in the IMA measurement tests.
To speedup things, based on Mimi's comments and review of v4 I pushed this first commit with few changes (below diff, only ima_keys.sh part)
* simplify error handling ($fail is not needed; I used tst_res and return because there will be second test, otherwise I'd use tst_brk)
* added modified docs into this commit
* fix commit title
TODO
* I'll send a patch to read CONFIG_IMA_X509_PATH (I've amended the commit already enough)
* @Lachlan: expect you send another version for test2.
* @Lachlan: would you also implement Mimi's suggestion? [1]:
An additional test might be to verify that only the keys in the measurement list are actually on the specified keyring and nothing else.
Kind regards,
Petr
[1] http://lists.linux.it/pipermail/ltp/2020-July/018018.html
kernel/security/integrity/ima/tests/ima_keys.sh +3 -6
@@ -15,7 +15,7 @@ TST_NEEDS_DEVICE=1 # (450d0fd51564 - "IMA: Call workqueue functions to measure queued keys") test1() { - local keyrings keycheck_lines keycheck_line templates test_file="file.txt" fail + local keyrings keycheck_lines keycheck_line templates test_file="file.txt" tst_res TINFO "verifying key measurement for keyrings and templates specified in IMA policy file"
@@ -57,15 +57,12 @@ test1() tst_brk TCONF "cannot compute digest for $algorithm" if [ "$digest" != "$expected_digest" ]; then - fail=1 tst_res TFAIL "incorrect digest was found for the ($keyring) keyring" - break + return fi done - if [ "$fail" ]; then - tst_res TPASS "specified keyrings were measured correctly" - fi + tst_res TPASS "specified keyrings were measured correctly" } tst_run
PATCH v5 2/2 IMA: Add a test to verify importing a certificate into keyring
In reply to Lachlan SneffAdd an IMA measurement test that verifies that an x509 certificate can be imported into the .ima keyring and measured correctly.
--- .../kernel/security/integrity/ima/README.md | 22 ++++++++++ .../security/integrity/ima/tests/ima_keys.sh | 44 ++++++++++++++++++- 2 files changed, 64 insertions(+), 2 deletions(-)
testcases/kernel/security/integrity/ima/README.md +22 -0
@@ -16,6 +16,28 @@ CONFIG_INTEGRITY=y CONFIG_IMA=y ``` +IMA Key Import test +------------- +`ima_keys.sh` requires an x509 certificate to be signed by a key on one +of the trusted keyrings. The x509 certificate must be placed at +`/etc/keys/x509_ima.der` for this test or the path must be passed in +the CERT_FILE env var. + +The x509 public key key must be signed by the private key you generate. +Follow these instructions: +https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys. + +The test cannot be set-up automatically because the x509 public key must be +built into the kernel and loaded onto a trusted keyring. + +As well as what's required for the IMA tests, the following are also required +in the kernel configuration: +``` +CONFIG_IMA_READ_POLICY=y +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem" +``` + EVM tests ---------
testcases/kernel/security/integrity/ima/tests/ima_keys.sh +42 -2
56 lines not on this page · raw message
Signature · 1 line
2.25.1