Skip to contentSkip to conversation

riscv: sifive/fu540: SPI boot

PATCH Superseded Jagan Teki 2 participants 9 messages Jul 15, 2020 – Jul 22, 2020 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

v5 cover riscv: sifive/fu540: SPI boot

Updated series with boot device detection directly on spl_boot_device function instead of having separate board driver.

Changes for v5:
- rebase on master
Changes for v4:
- fix typo and unneeded configs.
Changes for v3:
- fixed env definitions build
- added boot device detection in board
Changes for v2:
- fu540 board driver
- runtime bootmode detection
- rebase on Pragnesh v11 series

Any inputs?
Jagan.

Jagan Teki (6):
sifive: fu540: Add runtime boot mode detection
sifive: fu540: Add Booting from SPI
env: Enable SPI flash env for SiFive FU540
sifive: fu540: Mark the default env as SPI flash
sifive: fu540: Add boot flash script offset, size
sifive: fu540: Enable SF distro bootcmd

 arch/riscv/cpu/fu540/Kconfig                  | 13 ++++++
 .../dts/hifive-unleashed-a00-u-boot.dtsi      | 12 ++++++
 board/sifive/fu540/Kconfig                    |  1 +
 board/sifive/fu540/fu540.c                    | 25 ++++++++---
 configs/sifive_fu540_defconfig                |  4 ++
 doc/board/sifive/fu540.rst                    | 41 +++++++++++++++++++
 include/configs/sifive-fu540.h                |  7 +++-
 7 files changed, 96 insertions(+), 7 deletions(-)
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v5 1/6 sifive: fu540: Add runtime boot mode detection

Add support to detect boot mode at runtime for
SiFive FU540 boards.

---
Changes for v5:
- rebase on master

 board/sifive/fu540/fu540.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)
board/sifive/fu540/fu540.c +19 -6
index 27ff52f903..57753ba50b 100644
@@ -10,6 +10,7 @@
 #include <env.h>
 #include <init.h>
 #include <log.h>
+#include <linux/bitops.h>
 #include <linux/bug.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -128,14 +129,26 @@ int board_init(void)
 }
 
 #ifdef CONFIG_SPL
+#define MODE_SELECT_REG		0x1000
+#define MODE_SELECT_QSPI	0x6
+#define MODE_SELECT_SD		0xb
+#define MODE_SELECT_MASK	GENMASK(3, 0)
+
 u32 spl_boot_device(void)
 {
-#ifdef CONFIG_SPL_MMC_SUPPORT
-	return BOOT_DEVICE_MMC1;
-#else
-	puts("Unknown boot device\n");
-	hang();
-#endif
+	u32 mode_select = readl((void *)MODE_SELECT_REG);
+	u32 boot_device = mode_select & MODE_SELECT_MASK;
+
+	switch (boot_device) {
+	case MODE_SELECT_QSPI:
+		return BOOT_DEVICE_SPI;
+	case MODE_SELECT_SD:
+		return BOOT_DEVICE_MMC1;
+	default:
+		debug("Unsupported boot device 0x%x but trying MMC1\n",
+		      boot_device);
+		return BOOT_DEVICE_MMC1;
+	}
 }
 #endif
 
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH v5 2/6 sifive: fu540: Add Booting from SPI

In reply to Jagan Teki

Add booting from SPI for SiFive Unleashed board.

---
Changes for v5:
- rebase on master

 .../dts/hifive-unleashed-a00-u-boot.dtsi      | 12 ++++++
 configs/sifive_fu540_defconfig                |  4 ++
 doc/board/sifive/fu540.rst                    | 41 +++++++++++++++++++
 3 files changed, 57 insertions(+)
arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi +12 -0
index e037150520..7d838bf9de 100644
@@ -16,6 +16,10 @@
 		spi2 = &qspi2;
 	};
 
+	config {
+		u-boot,spl-payload-offset = <0x105000>; /* loader2 @1044KB */
+	};
+
 	hfclk {
 		u-boot,dm-spl;
 	};
@@ -26,6 +30,14 @@
 
 };
 
+&qspi0 {
+	u-boot,dm-spl;
+
+	flash at 0 {
+		u-boot,dm-spl;
+	};
+};
+
 &qspi2 {
 	mmc at 0 {
 		u-boot,dm-spl;
configs/sifive_fu540_defconfig +4 -0
index 9e00a56ce6..06e17860c6 100644
@@ -6,6 +6,7 @@ CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_TARGET_SIFIVE_FU540=y
 CONFIG_ARCH_RV64I=y
@@ -16,8 +17,11 @@ CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_CLK=y
 CONFIG_DM_MTD=y
doc/board/sifive/fu540.rst +41 -0

44 lines not on this page · raw message

Signature · 1 line
2.25.1
author
#3 lore raw

PATCH v5 3/6 env: Enable SPI flash env for SiFive FU540

In reply to Jagan Teki

SPI flash device on HiFive Unleashed has 32MiB Size.

This patch adds SPI flash environment after U-Boot proper partition with a size of 128KiB.

SPI flash partition layout(32MiB):
0 - 34 : reserved for GPT header
35 - 39 : unused
40 - 2087 : loader1 (SPL, FSBL)
2088 - 10279 : loader2 (U-Boot proper, U-Boot)
10280 - 10535 : environment
10536 - 65494 : rootfs
65528 - 65536 : distro script

Note: the loader1 must start from 40th sector even though there are 6 free sectors prior since 40th sector is nearest flash sector boundary.?

---
Changes for v5:
- rebase on master

 arch/riscv/cpu/fu540/Kconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/riscv/cpu/fu540/Kconfig +13 -0
index e9302e87c0..2dcad8e27f 100644
@@ -13,3 +13,16 @@ config SIFIVE_FU540
 	imply SPL_CPU_SUPPORT
 	imply SPL_OPENSBI
 	imply SPL_LOAD_FIT
+
+if ENV_IS_IN_SPI_FLASH
+
+config ENV_OFFSET
+	default 0x505000
+
+config ENV_SIZE
+	default 0x20000
+
+config ENV_SECT_SIZE
+	default 0x10000
+
+endif # ENV_IS_IN_SPI_FLASH
Signature · 1 line
2.25.1
author
#4 lore raw

PATCH v5 4/6 sifive: fu540: Mark the default env as SPI flash

In reply to Jagan Teki

Mark the default U-Boot environment as SPI flash since this is an on board flash device.

---
Changes for v5:
- rebase on master

 board/sifive/fu540/Kconfig | 1 +
 1 file changed, 1 insertion(+)
board/sifive/fu540/Kconfig +1 -0
index 86193d7668..e1ba629e37 100644
@@ -27,6 +27,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select SIFIVE_FU540
 	select SUPPORT_SPL
+	select ENV_IS_IN_SPI_FLASH
 	select RAM
 	select SPL_RAM if SPL
 	imply CMD_DHCP
Signature · 1 line
2.25.1
author
#5 lore raw

PATCH v5 5/6 sifive: fu540: Add boot flash script offset, size

In reply to Jagan Teki

HiFive-Unleashed-A00 has SPI flash with 32MiB size. So, let's use the script offset at the end of 4K. This way it cannot overlap any offsets being used by software components in flash layout.

So, SF distrocmd will pick the script at desired script address and run.

---
Changes for v5:
- rebase on master

 include/configs/sifive-fu540.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/sifive-fu540.h +2 -0
index 72c841eb9b..68fda14d76 100644
@@ -62,6 +62,8 @@
 	"kernel_addr_r=0x84000000\0" \
 	"fdt_addr_r=0x88000000\0" \
 	"scriptaddr=0x88100000\0" \
+	"script_offset_f=0x1fff000\0" \
+	"script_size_f=0x1000\0" \
 	"pxefile_addr_r=0x88200000\0" \
 	"ramdisk_addr_r=0x88300000\0" \
 	"type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \
Signature · 1 line
2.25.1
author
#6 lore raw

PATCH v5 6/6 sifive: fu540: Enable SF distro bootcmd

In reply to Jagan Teki

Enable SPI flash(SF) distro boot command in Sifive FU540.

This distro boot will read the boot script at specific location at the flash and start sourcing the same.

Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern.

---
Changes for v5:
- rebase on master

 include/configs/sifive-fu540.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
include/configs/sifive-fu540.h +4 -1
index 68fda14d76..f21411a701 100644
@@ -43,9 +43,11 @@
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(SF, sf, 0) \
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <environment/distro/sf.h>
 
 #define TYPE_GUID_LOADER1	"5B193300-FC78-40CD-8002-E86C45580B47"
 #define TYPE_GUID_LOADER2	"2E54B353-1271-4842-806F-E436D6AF6985"
@@ -70,7 +72,8 @@
 	"type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \
 	"type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
 	"partitions=" PARTS_DEFAULT "\0" \
-	BOOTENV
+	BOOTENV \
+	BOOTENV_SF
 
 #define CONFIG_PREBOOT \
 	"setenv fdt_addr ${fdtcontroladdr};" \
Signature · 1 line
2.25.1
author
#7 lore raw

v5 cover riscv: sifive/fu540: SPI boot

In reply to Jagan Teki

Hi Rick,

Quoted 37 lines · Jagan Teki

Updated series with boot device detection directly on spl_boot_device function instead of having separate board driver.

Changes for v5:
- rebase on master
Changes for v4:
- fix typo and unneeded configs.
Changes for v3:
- fixed env definitions build
- added boot device detection in board
Changes for v2:
- fu540 board driver
- runtime bootmode detection
- rebase on Pragnesh v11 series

Any inputs?
Jagan.

Jagan Teki (6):
sifive: fu540: Add runtime boot mode detection
sifive: fu540: Add Booting from SPI
env: Enable SPI flash env for SiFive FU540
sifive: fu540: Mark the default env as SPI flash
sifive: fu540: Add boot flash script offset, size
sifive: fu540: Enable SF distro bootcmd

 arch/riscv/cpu/fu540/Kconfig                  | 13 ++++++
 .../dts/hifive-unleashed-a00-u-boot.dtsi      | 12 ++++++
 board/sifive/fu540/Kconfig                    |  1 +
 board/sifive/fu540/fu540.c                    | 25 ++++++++---
 configs/sifive_fu540_defconfig                |  4 ++
 doc/board/sifive/fu540.rst                    | 41 +++++++++++++++++++
 include/configs/sifive-fu540.h                |  7 +++-
 7 files changed, 96 insertions(+), 7 deletions(-)
Quoted 3 lines

--
2.25.1

Any chance to pick this?

Jagan.

A message that is not in the archive (sent off-list or not yet received): [email protected]

#9 lore raw

v5 cover riscv: sifive/fu540: SPI boot

Hi Jagan

Quoted 44 lines

From: Jagan Teki [mailto:jagan at amarulasolutions.com]
Sent: Tuesday, July 21, 2020 2:26 PM
To: Rick Jian-Zhi Chen(???); Atish Patra; Palmer Dabbelt; Bin Meng; Paul Walmsley; Anup Patel; Sagar Kadam
Cc: U-Boot-Denx; linux-amarula
Subject: Re: [PATCH v5 0/6] riscv: sifive/fu540: SPI boot

Hi Rick,

Quoted 35 lines · Jagan Teki

Updated series with boot device detection directly on spl_boot_device function instead of having separate board driver.

Changes for v5:
- rebase on master
Changes for v4:
- fix typo and unneeded configs.
Changes for v3:
- fixed env definitions build
- added boot device detection in board Changes for v2:
- fu540 board driver
- runtime bootmode detection
- rebase on Pragnesh v11 series

Any inputs?
Jagan.

Jagan Teki (6):
sifive: fu540: Add runtime boot mode detection
sifive: fu540: Add Booting from SPI
env: Enable SPI flash env for SiFive FU540
sifive: fu540: Mark the default env as SPI flash
sifive: fu540: Add boot flash script offset, size
sifive: fu540: Enable SF distro bootcmd

 arch/riscv/cpu/fu540/Kconfig                  | 13 ++++++
 .../dts/hifive-unleashed-a00-u-boot.dtsi      | 12 ++++++
 board/sifive/fu540/Kconfig                    |  1 +
 board/sifive/fu540/fu540.c                    | 25 ++++++++---
 configs/sifive_fu540_defconfig                |  4 ++
 doc/board/sifive/fu540.rst                    | 41 +++++++++++++++++++
 include/configs/sifive-fu540.h                |  7 +++-
 7 files changed, 96 insertions(+), 7 deletions(-)
Quoted 5 lines
Quoted 3 lines

--
2.25.1

Any chance to pick this?

Applied to u-boot-riscv/master !

Thanks,
Rick

Quoted 2 lines

Jagan.