configs/imx6ullevk: Add new defconfig
Fabio Estevam
reviewerPATCH 1/1 configs/imx6ullevk: Add new defconfig
Add support for imx6ullevk_defconfig that allows booting a mainline kernel and mainline U-Boot.
Signed-off-by Fabio Estevam <[email protected]>
--- .gitlab-ci.yml | 1 + DEVELOPERS | 1 + board/freescale/imx6ullevk/readme.txt | 10 ++++++++ configs/imx6ullevk_defconfig | 37 +++++++++++++++++++++++++++ 4 files changed, 49 insertions(+) create mode 100644 configs/imx6ullevk_defconfig
.gitlab-ci.yml +1 -0
@@ -208,6 +208,7 @@ imx6-sabresd_qt5_defconfig: { extends: .defconfig } imx6slevk_defconfig: { extends: .defconfig } imx6sx-sdb_defconfig: { extends: .defconfig } imx6ulevk_defconfig: { extends: .defconfig } +imx6ullevk_defconfig: { extends: .defconfig } imx6ulpico_defconfig: { extends: .defconfig } imx7d-sdb_defconfig: { extends: .defconfig } imx7dpico_defconfig: { extends: .defconfig }
DEVELOPERS +1 -0
@@ -792,6 +792,7 @@ F: configs/imx6-sabre* F: configs/imx6slevk_defconfig F: configs/imx6sx-sdb_defconfig F: configs/imx6ulevk_defconfig +F: configs/imx6ullevk_defconfig F: configs/imx6ulpico_defconfig F: configs/imx7d-sdb_defconfig F: configs/imx7dpico_defconfig
board/freescale/imx6ullevk/readme.txt +10 -0
@@ -9,8 +9,18 @@ Build First, configure Buildroot for your i.MX6ULL EVK board: +In order to to do so there are two supported options: + make freescale_imx6ullevk_defconfig +if you plan to use NXP provided U-Boot and kernel. + +or + + make imx6ullevk_defconfig + +if you plan to use mainline U-Boot and mainline kernel. + Build all components: make
configs/imx6ullevk_defconfig new file +37 -0
@@ -0,0 +1,37 @@ +# architecture +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.7 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y + +# system +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" + +# kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.8" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ull-14x14-evk" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6ull_14x14_evk" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07" +BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y" +BR2_TARGET_UBOOT_NEEDS_DTC=y + +# required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + +# filesystem / image +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y
Signature · 1 line
2.17.1
Thomas Petazzoni
AppliedPATCH 1/1 configs/imx6ullevk: Add new defconfig
Quoted 11 lines · On Wed, 15 Jul 2020 21:25:59 -0300 Fabio Estevam <[email protected]> wrote:
Add support for
imx6ullevk_defconfigthat allows booting a mainline kernel and mainline U-Boot.Signed-off-by Fabio Estevam <[email protected]>--- .gitlab-ci.yml | 1 + DEVELOPERS | 1 + board/freescale/imx6ullevk/readme.txt | 10 ++++++++ configs/imx6ullevk_defconfig | 37 +++++++++++++++++++++++++++ 4 files changed, 49 insertions(+) create mode 100644 configs/imx6ullevk_defconfig
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com