misc: scu_api: Add SCFW API to get the index of boot container set
PATCH 1/3 misc: scu_api: Add SCFW API to get the index of boot container set
Add SCFW API sc_misc_get_boot_container to get current boot container set index.
The index value returns 1 for primary container set, 2 for secondary container set.
--- arch/arm/include/asm/arch-imx8/sci/rpc.h | 1 + arch/arm/include/asm/arch-imx8/sci/sci.h | 1 + drivers/misc/imx8/scu_api.c | 25 +++++++++++++++++++++++++ 3 files changed, 27 insertions(+)
arch/arm/include/asm/arch-imx8/sci/rpc.h +1 -0
@@ -115,6 +115,7 @@ struct sc_rpc_msg_s {#define MISC_FUNC_GET_TEMP 13U#define MISC_FUNC_GET_BOOT_DEV 16U#define MISC_FUNC_GET_BUTTON_STATUS 18U +#define MISC_FUNC_GET_BOOT_CONTAINER 36U/* PAD RPC */ #define PAD_FUNC_UNKNOWN 0
arch/arm/include/asm/arch-imx8/sci/sci.h +1 -0
@@ -82,6 +82,7 @@ int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl, u32 *val);void sc_misc_get_boot_dev (sc_ipc_t ipc,sc_rsrc_t *boot_dev);void sc_misc_boot_status (sc_ipc_t ipc,sc_misc_boot_status_t status); +int sc_misc_get_boot_container (sc_ipc_t ipc,u8 *idx);void sc_misc_build_info (sc_ipc_t ipc,u32 *build,u32 *commit);int sc_misc_otp_fuse_read (sc_ipc_t ipc,u32 word,u32 *val); int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,
drivers/misc/imx8/scu_api.c +25 -0
@@ -374,6 +374,31 @@ void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status) __func__, status, RPC_R8(&msg)); } +int sc_misc_get_boot_container (sc_ipc_t ipc,u8 *idx) +{ +struct udevice *dev = gd->arch.scu_dev; +int size =sizeof (struct sc_rpc_msg_s ); +struct sc_rpc_msg_s msg; +int ret; + +if (!dev) +hang (); + +RPC_VER (&msg) =SC_RPC_VERSION ; +RPC_SIZE (&msg) =1U ; +RPC_SVC (&msg) = (u8 )SC_RPC_SVC_MISC ; +RPC_FUNC (&msg) = (u8 )MISC_FUNC_GET_BOOT_CONTAINER ; + + ret =misc_call (dev,SC_FALSE , &msg, size, &msg, size); +if (ret <0 ) +return ret; + +if (idx) + *idx = (u8 )RPC_U8 (&msg,0U ); + +return 0 ; +} +void sc_misc_build_info (sc_ipc_t ipc,u32 *build,u32 *commit) {struct udevice *dev = gd->arch.scu_dev;
Signature · 1 line
2.7.4
PATCH 2/3 spl: mmc: Move the eMMC boot part index to weak function
Move the default eMMC boot partition index used for SPL load to a weak function. So we can override it in iMX8 specified codes. Because on iMX8 when the emmc regular boot is from boot part0/1, ROM will switch to the other boot part for secondary boot. So we can't directly use the boot part index in PARTITION_CONFIG register, but have to check the secondary boot for using correct boot partition.
--- common/spl/spl_mmc.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-)
common/spl/spl_mmc.c +22 -13
@@ -324,6 +324,27 @@ unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc,return raw_sect; } +int __weak spl_mmc_emmc_boot_partition (struct mmc *mmc) +{ +int part =0 ; + +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION + part =CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION ; +#else +/* +* We need to check what the partition is configured to. +* 1 and 2 match up to boot0 / boot1 and 7 is user data +* which is the first physical partition (0). +*/ + part = (mmc->part_config >>3 ) &PART_ACCESS_MASK ; + +if (part ==7 ) + part =0 ; +#endif + +return part; +} + int spl_mmc_load(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, const char *filename,
@@ -355,19 +376,7 @@ int spl_mmc_load(struct spl_image_info *spl_image, err = -EINVAL ;switch (boot_mode) {case MMCSD_MODE_EMMCBOOT : -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION - part =CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION ; -#else -/* -* We need to check what the partition is configured to. -* 1 and 2 match up to boot0 / boot1 and 7 is user data -* which is the first physical partition (0). -*/ - part = (mmc->part_config >>3 ) &PART_ACCESS_MASK ; - -if (part ==7 ) - part =0 ; -#endif + part =spl_mmc_emmc_boot_partition (mmc);if (CONFIG_IS_ENABLED (MMC_TINY )) err =mmc_switch_part (mmc, part);
Signature · 1 line
2.7.4
PATCH 3/3 imx8: spl: Support booting from secondary container set
In reply to Ye LiOn i.MX8QM B0 and i.MX8QXP C0, ROM supports to boot from secondary container set when either booting from primary container set is failed or secondary container set has higher SW version.
Add the support to SPL to load u-boot container from secondary set when ROM boots from the secondary set. Using the SCFW API to get current container set index. If it is the secondary boot, get the offset from fuse and apply it to the offset of primary container set.
For emmc boot from boot0/1 part, override the emmc boot partition function to check secondary boot and switch to correct boot part.
--- arch/arm/mach-imx/imx8/image.c | 81 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 76 insertions(+), 5 deletions(-)
arch/arm/mach-imx/imx8/image.c +76 -5
@@ -20,6 +20,23 @@#define NAND_DEV 2#define QSPI_NOR_DEV 3 +/* The unit of second image offset number which provision by the fuse bits */ +#define SND_IMG_OFF_UNIT (0x100000UL) + +/* +* If num = 0, off = (2 ^ 2) * 1MB +* else If num = 2, off = (2 ^ 0) * 1MB +* else off = (2 ^ num) * 1MB +*/ +#define SND_IMG_NUM_TO_OFF (num) \ + ((1UL << ((0 == (num)) ? 2 : (2 == (num)) ? 0 : (num))) * SND_IMG_OFF_UNIT) + +#if IS_ENABLED (CONFIG_IMX8QM ) +#define FUSE_IMG_SET_OFF_WORD 464 +#elif IS_ENABLED (CONFIG_IMX8QXP ) +#define FUSE_IMG_SET_OFF_WORD 720 +#endif +static int __get_container_size (ulong addr) {struct container_hdr *phdr;
@@ -122,15 +139,46 @@ static int get_container_size(void *dev, int dev_type, unsigned long offset)return ret; } +static bool check_secondary_cnt_set (unsigned long *set_off) +{ +int ret; +u8 set_id =1 ; +u32 fuse_val =0 ; + +if (!(is_imx8qxp () &&is_soc_rev (CHIP_REV_B ))) { + ret =sc_misc_get_boot_container (-1 , &set_id); +if (!ret) { +/* Secondary boot */ +if (set_id ==2 ) { + ret =sc_misc_otp_fuse_read (-1 ,FUSE_IMG_SET_OFF_WORD , &fuse_val); +if (!ret) { +if (set_off) + *set_off =SND_IMG_NUM_TO_OFF (fuse_val); +return true; + } + } + } + } + +return false; +} +static unsigned long get_boot_device_offset (void *dev,int dev_type) { -unsigned long offset =0 ; +unsigned long offset =0 , sec_set_off =0 ; +bool sec_boot = false; + + sec_boot =check_secondary_cnt_set (&sec_set_off); +if (sec_boot) +printf ("Secondary set selected\n" ); +else +printf ("Primary set selected\n" );if (dev_type ==MMC_DEV ) {struct mmc *mmc = (struct mmc *)dev;if (IS_SD (mmc) || mmc->part_config ==MMCPART_NOAVAILABLE ) { - offset =CONTAINER_HDR_MMCSD_OFFSET ; + offset = sec_boot ? sec_set_off :CONTAINER_HDR_MMCSD_OFFSET ; }else {u8 part =EXT_CSD_EXTRACT_BOOT_PART (mmc->part_config);
@@ -140,17 +188,21 @@ static unsigned long get_boot_device_offset(void *dev, int dev_type)else offset =CONTAINER_HDR_EMMC_OFFSET ; }else { - offset =CONTAINER_HDR_MMCSD_OFFSET ; + offset = sec_boot ? sec_set_off :CONTAINER_HDR_MMCSD_OFFSET ; } } }else if (dev_type ==QSPI_DEV ) { - offset =CONTAINER_HDR_QSPI_OFFSET ; + offset = sec_boot ? (sec_set_off +CONTAINER_HDR_QSPI_OFFSET ) : +CONTAINER_HDR_QSPI_OFFSET ; }else if (dev_type ==NAND_DEV ) { - offset =CONTAINER_HDR_NAND_OFFSET ; + offset = sec_boot ? (sec_set_off +CONTAINER_HDR_NAND_OFFSET ) : +CONTAINER_HDR_NAND_OFFSET ; }else if (dev_type ==QSPI_NOR_DEV ) { offset =CONTAINER_HDR_QSPI_OFFSET +0x08000000 ; } +debug ("container set offset 0x%lx\n" , offset); +return offset; }
@@ -210,6 +262,25 @@ unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc, return end / mmc->read_bl_len; } + +int spl_mmc_emmc_boot_partition (struct mmc *mmc) +{ +int part =0 ; + + part =EXT_CSD_EXTRACT_BOOT_PART (mmc->part_config); +if (part ==1 || part ==2 ) { +unsigned long sec_set_off =0 ; +bool sec_boot = false; + + sec_boot =check_secondary_cnt_set (&sec_set_off); +if (sec_boot) + part = (part ==1 ) ?2 :1 ; + }else if (part ==7 ) { + part =0 ; + } + +return part; +}#endif #ifdef CONFIG_SPL_NAND_SUPPORT
Signature · 1 line
2.7.4
PATCH 1/3 misc: scu_api: Add SCFW API to get the index of boot container set
In reply to Ye LiQuoted 6 lines
Add SCFW API
sc_misc_get_boot_containerto get current boot container set index.
The index value returns 1 for primary container set, 2 for secondary container set.Signed-off-by Ye Li <[email protected]>Reviewed-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================