Skip to contentSkip to conversation

net/bonding: change the state machine to defaulted

PATCH In review Weifeng Li 4 participants 6 messages Jul 7, 2020 – Jul 20, 2020

Subsystems (2)
lore
Share & tools
lore

Weifeng Li

author
#0 lore raw

PATCH v2 1/1 net/bonding: change the state machine to defaulted

From: Weifeng Li <[email protected]>

A dpdk bonding 802.3ad network as follows:

+----------+                     +-----------+
|dpdk lacp |slave1 <------> port1|switch lacp|
|          |slave2 <------> port2|           |
+----------+                     +-----------+

If a fiber optic go wrong about single pass during normal running like this:
slave2 -----> port2 ok
slave2 <----- port2 error: salve2 receive no LACPDU Some packets from
switch to dpdk will choose port2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Port2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Port2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

---
v1 -> v2: adjust the formate of commit log

---
 drivers/net/bonding/eth_bond_8023ad_private.h |  2 ++
 drivers/net/bonding/rte_eth_bond_8023ad.c     | 21 +++++++++++++++++----
 2 files changed, 19 insertions(+), 4 deletions(-)
drivers/net/bonding/eth_bond_8023ad_private.h +2 -0
index 6e44ffd..76f8b8d 100644
@@ -50,6 +50,7 @@
 #define SM_FLAGS_MOVED                      0x0100
 #define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
 #define SM_FLAGS_NTT                        0x0400
+#define SM_FLAGS_EXPIRED                    0x0800
 
 #define BOND_LINK_FULL_DUPLEX_KEY           0x01
 #define BOND_LINK_SPEED_KEY_10M             0x02
@@ -103,6 +104,7 @@ struct port {
 
 	/** The operational Partner's port parameters */
 	struct port_params partner;
+	struct port_params partner_admin;
 
 	/* Additional port parameters not listed in documentation */
 	/** State machine flags */
drivers/net/bonding/rte_eth_bond_8023ad.c +17 -4
index b77a37d..bfa418d 100644
@@ -356,16 +356,28 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 
 		timer_set(&port->current_while_timer, timeout);
 		ACTOR_STATE_CLR(port, EXPIRED);
+		SM_FLAG_CLR(port, EXPIRED);
 		return; /* No state change */
 	}
 
 	/* If CURRENT state timer is not running (stopped or expired)
 	 * transit to EXPIRED state from DISABLED or CURRENT */
 	if (!timer_is_running(&port->current_while_timer)) {
-		ACTOR_STATE_SET(port, EXPIRED);
-		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
-		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
-		timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+		if (SM_FLAG(port, EXPIRED)) {
+			port->selected = UNSELECTED;
+			memcpy(&port->partner, &port->partner_admin,
+				sizeof(struct port_params));
+			record_default(port);
+			ACTOR_STATE_CLR(port, EXPIRED);
+			timer_cancel(&port->current_while_timer);
+		} else {
+			SM_FLAG_SET(port, EXPIRED);
+			ACTOR_STATE_SET(port, EXPIRED);
+			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+			PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+			timer_set(&port->current_while_timer,
+				internals->mode4.short_timeout);
+		}
 	}
 }
 
@@ -1020,6 +1032,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
 	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
 	memcpy(&port->partner, &initial, sizeof(struct port_params));
+	memcpy(&port->partner_admin, &initial, sizeof(struct port_params));
 
 	/* default states */
 	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
Signature · 1 line
2.9.5
#1 lore raw

Hi, Weifeng Li

Quoted 61 lines · Weifeng Li

From: Weifeng Li <[email protected]>

A dpdk bonding 802.3ad network as follows:

+----------+                     +-----------+
|dpdk lacp |slave1 <------> port1|switch lacp|
|          |slave2 <------> port2|           |
+----------+                     +-----------+

If a fiber optic go wrong about single pass during normal running like this:
slave2 -----> port2 ok
slave2 <----- port2 error: salve2 receive no LACPDU Some packets from
switch to dpdk will choose port2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Port2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Port2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

---
v1 -> v2: adjust the formate of commit log

---
  drivers/net/bonding/eth_bond_8023ad_private.h |  2 ++
  drivers/net/bonding/rte_eth_bond_8023ad.c     | 21 +++++++++++++++++----
  2 files changed, 19 insertions(+), 4 deletions(-)
drivers/net/bonding/eth_bond_8023ad_private.h +1 -0
index 6e44ffd..76f8b8d 100644
@@ -50,6 +50,7 @@
  #define SM_FLAGS_MOVED                      0x0100
  #define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
  #define SM_FLAGS_NTT                        0x0400
+#define SM_FLAGS_EXPIRED                    0x0800
 
  #define BOND_LINK_FULL_DUPLEX_KEY           0x01
  #define BOND_LINK_SPEED_KEY_10M             0x02

drivers/net/bonding/eth_bond_8023ad_private.h struct port { · line 107

Quoted 4 lines
drivers/net/bonding/eth_bond_8023ad_private.h +1 -0
@@ -103,6 +104,7 @@ struct port {
 
  	/** The operational Partner's port parameters */
  	struct port_params partner;
+	struct port_params partner_admin;

Could you add some description about partner_admin here or in the commit log? It would be better if there was decription from IEEE spec.

Thanks, Xavier

Quoted 48 lines
drivers/net/bonding/eth_bond_8023ad_private.h +0 -0
  	/* Additional port parameters not listed in documentation */
  	/** State machine flags */
drivers/net/bonding/rte_eth_bond_8023ad.c +17 -4
index b77a37d..bfa418d 100644
@@ -356,16 +356,28 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 
  		timer_set(&port->current_while_timer, timeout);
  		ACTOR_STATE_CLR(port, EXPIRED);
+		SM_FLAG_CLR(port, EXPIRED);
  		return; /* No state change */
  	}
 
  	/* If CURRENT state timer is not running (stopped or expired)
  	 * transit to EXPIRED state from DISABLED or CURRENT */
  	if (!timer_is_running(&port->current_while_timer)) {
-		ACTOR_STATE_SET(port, EXPIRED);
-		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
-		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
-		timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+		if (SM_FLAG(port, EXPIRED)) {
+			port->selected = UNSELECTED;
+			memcpy(&port->partner, &port->partner_admin,
+				sizeof(struct port_params));
+			record_default(port);
+			ACTOR_STATE_CLR(port, EXPIRED);
+			timer_cancel(&port->current_while_timer);
+		} else {
+			SM_FLAG_SET(port, EXPIRED);
+			ACTOR_STATE_SET(port, EXPIRED);
+			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+			PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+			timer_set(&port->current_while_timer,
+				internals->mode4.short_timeout);
+		}
  	}
  }
 
@@ -1020,6 +1032,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
  	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
  	memcpy(&port->partner, &initial, sizeof(struct port_params));
+	memcpy(&port->partner_admin, &initial, sizeof(struct port_params));
 
  	/* default states */
  	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
#2 lore raw

PATCH v3 1/1 net/bonding: change the state machine to defaulted

In reply to Weifeng Li

A dpdk bonding 802.3ad network as follows:

+----------+                        +-----------+
|dpdk lacp |bond1.1 <------> bond2.1|switch lacp|
|          |bond1.2 <------> bond2.2|           |
+----------+                        +-----------+

If a fiber optic go wrong about single pass during normal running like this:
bond1.2 -----> bond2.2 ok
bond1.2 <--x-- bond2.2 error: bond1.2 receive no LACPDU Some packets from
switch to dpdk will choose bond2.2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Bond2.2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Bond2.2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

---
v1 -> v2: adjust the formate of commit log
---
v2 -> v3:
1. adjust coding style issue.
2. add description about partner_admin from IEEE spec.

---
 drivers/net/bonding/eth_bond_8023ad_private.h |  3 +++
 drivers/net/bonding/rte_eth_bond_8023ad.c     | 21 +++++++++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)
drivers/net/bonding/eth_bond_8023ad_private.h +3 -0
index 6e44ffd..9b5738a 100644
@@ -50,6 +50,7 @@
 #define SM_FLAGS_MOVED                      0x0100
 #define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
 #define SM_FLAGS_NTT                        0x0400
+#define SM_FLAGS_EXPIRED                    0x0800
 
 #define BOND_LINK_FULL_DUPLEX_KEY           0x01
 #define BOND_LINK_SPEED_KEY_10M             0x02
@@ -103,6 +104,8 @@ struct port {
 
 	/** The operational Partner's port parameters */
 	struct port_params partner;
+	/** Partner administrative parameter values */
+	struct port_params partner_admin;
 
 	/* Additional port parameters not listed in documentation */
 	/** State machine flags */
drivers/net/bonding/rte_eth_bond_8023ad.c +17 -4
index 3991825..3c2c7bf 100644
@@ -356,16 +356,28 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 
 		timer_set(&port->current_while_timer, timeout);
 		ACTOR_STATE_CLR(port, EXPIRED);
+		SM_FLAG_CLR(port, EXPIRED);
 		return; /* No state change */
 	}
 
 	/* If CURRENT state timer is not running (stopped or expired)
 	 * transit to EXPIRED state from DISABLED or CURRENT */
 	if (!timer_is_running(&port->current_while_timer)) {
-		ACTOR_STATE_SET(port, EXPIRED);
-		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
-		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
-		timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+		if (SM_FLAG(port, EXPIRED)) {
+			port->selected = UNSELECTED;
+			memcpy(&port->partner, &port->partner_admin,
+				sizeof(struct port_params));
+			record_default(port);
+			ACTOR_STATE_CLR(port, EXPIRED);
+			timer_cancel(&port->current_while_timer);
+		} else {
+			SM_FLAG_SET(port, EXPIRED);
+			ACTOR_STATE_SET(port, EXPIRED);
+			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+			PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+			timer_set(&port->current_while_timer,
+				internals->mode4.short_timeout);
+		}
 	}
 }
 
@@ -1021,6 +1033,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
 	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
 	memcpy(&port->partner, &initial, sizeof(struct port_params));
+	memcpy(&port->partner_admin, &initial, sizeof(struct port_params));
 
 	/* default states */
 	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
Signature · 1 line
2.9.5
#3 lore raw

PATCH v4 1/1 net/bonding: change the state machine to defaulted

A dpdk bonding 802.3ad network as follows:

+----------+                        +-----------+
|dpdk lacp |bond1.1 <------> bond2.1|switch lacp|
|          |bond1.2 <------> bond2.2|           |
+----------+                        +-----------+

If a fiber optic go wrong about single pass during normal running like this:
bond1.2 -----> bond2.2 ok
bond1.2 <--x-- bond2.2 error: bond1.2 receive no LACPDU Some packets from
switch to dpdk will choose bond2.2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Bond2.2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Bond2.2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

---
v1 -> v2: adjust the formate of commit log
---
v2 -> v3:
1. adjust coding style issue.
2. add description about partner_admin from IEEE spec.
---
v3 -> v4
1. adjust coding style issue: Missing Signed-off-by

---
 drivers/net/bonding/eth_bond_8023ad_private.h |  3 +++
 drivers/net/bonding/rte_eth_bond_8023ad.c     | 21 +++++++++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)
drivers/net/bonding/eth_bond_8023ad_private.h +3 -0
index 6e44ffd..9b5738a 100644
@@ -50,6 +50,7 @@
 #define SM_FLAGS_MOVED                      0x0100
 #define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
 #define SM_FLAGS_NTT                        0x0400
+#define SM_FLAGS_EXPIRED                    0x0800
 
 #define BOND_LINK_FULL_DUPLEX_KEY           0x01
 #define BOND_LINK_SPEED_KEY_10M             0x02
@@ -103,6 +104,8 @@ struct port {
 
 	/** The operational Partner's port parameters */
 	struct port_params partner;
+	/** Partner administrative parameter values */
+	struct port_params partner_admin;
 
 	/* Additional port parameters not listed in documentation */
 	/** State machine flags */
drivers/net/bonding/rte_eth_bond_8023ad.c +17 -4
index 3991825..3c2c7bf 100644
@@ -356,16 +356,28 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 
 		timer_set(&port->current_while_timer, timeout);
 		ACTOR_STATE_CLR(port, EXPIRED);
+		SM_FLAG_CLR(port, EXPIRED);
 		return; /* No state change */
 	}
 
 	/* If CURRENT state timer is not running (stopped or expired)
 	 * transit to EXPIRED state from DISABLED or CURRENT */
 	if (!timer_is_running(&port->current_while_timer)) {
-		ACTOR_STATE_SET(port, EXPIRED);
-		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
-		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
-		timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+		if (SM_FLAG(port, EXPIRED)) {
+			port->selected = UNSELECTED;
+			memcpy(&port->partner, &port->partner_admin,
+				sizeof(struct port_params));
+			record_default(port);
+			ACTOR_STATE_CLR(port, EXPIRED);
+			timer_cancel(&port->current_while_timer);
+		} else {
+			SM_FLAG_SET(port, EXPIRED);
+			ACTOR_STATE_SET(port, EXPIRED);
+			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+			PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+			timer_set(&port->current_while_timer,
+				internals->mode4.short_timeout);
+		}
 	}
 }
 
@@ -1021,6 +1033,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
 	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
 	memcpy(&port->partner, &initial, sizeof(struct port_params));
+	memcpy(&port->partner_admin, &initial, sizeof(struct port_params));
 
 	/* default states */
 	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
Signature · 1 line
2.9.5
Acked-by on v4 1/1
#4 lore raw

Hi, Weifeng Li

Quoted 35 lines · Weifeng Li

A dpdk bonding 802.3ad network as follows:

+----------+                        +-----------+
|dpdk lacp |bond1.1 <------> bond2.1|switch lacp|
|          |bond1.2 <------> bond2.2|           |
+----------+                        +-----------+

If a fiber optic go wrong about single pass during normal running like this:
bond1.2 -----> bond2.2 ok
bond1.2 <--x-- bond2.2 error: bond1.2 receive no LACPDU Some packets from
switch to dpdk will choose bond2.2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Bond2.2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Bond2.2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

Quoted 2 lines

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

Fixes 46fb43683679 ("bond: add mode 4")
Quoted 1 line

Thanks you for fixing this issue.

Xavier

Quoted 80 lines

---
v1 -> v2: adjust the formate of commit log
---
v2 -> v3:
1. adjust coding style issue.
2. add description about partner_admin from IEEE spec.
---
v3 -> v4
1. adjust coding style issue: Missing Signed-off-by

---
  drivers/net/bonding/eth_bond_8023ad_private.h |  3 +++
  drivers/net/bonding/rte_eth_bond_8023ad.c     | 21 +++++++++++++++++----
  2 files changed, 20 insertions(+), 4 deletions(-)
drivers/net/bonding/eth_bond_8023ad_private.h +3 -0
index 6e44ffd..9b5738a 100644
@@ -50,6 +50,7 @@
  #define SM_FLAGS_MOVED                      0x0100
  #define SM_FLAGS_PARTNER_SHORT_TIMEOUT      0x0200
  #define SM_FLAGS_NTT                        0x0400
+#define SM_FLAGS_EXPIRED                    0x0800
 
  #define BOND_LINK_FULL_DUPLEX_KEY           0x01
  #define BOND_LINK_SPEED_KEY_10M             0x02
@@ -103,6 +104,8 @@ struct port {
 
  	/** The operational Partner's port parameters */
  	struct port_params partner;
+	/** Partner administrative parameter values */
+	struct port_params partner_admin;
 
  	/* Additional port parameters not listed in documentation */
  	/** State machine flags */
drivers/net/bonding/rte_eth_bond_8023ad.c +17 -4
index 3991825..3c2c7bf 100644
@@ -356,16 +356,28 @@ rx_machine(struct bond_dev_private *internals, uint16_t slave_id,
 
  		timer_set(&port->current_while_timer, timeout);
  		ACTOR_STATE_CLR(port, EXPIRED);
+		SM_FLAG_CLR(port, EXPIRED);
  		return; /* No state change */
  	}
 
  	/* If CURRENT state timer is not running (stopped or expired)
  	 * transit to EXPIRED state from DISABLED or CURRENT */
  	if (!timer_is_running(&port->current_while_timer)) {
-		ACTOR_STATE_SET(port, EXPIRED);
-		PARTNER_STATE_CLR(port, SYNCHRONIZATION);
-		PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
-		timer_set(&port->current_while_timer, internals->mode4.short_timeout);
+		if (SM_FLAG(port, EXPIRED)) {
+			port->selected = UNSELECTED;
+			memcpy(&port->partner, &port->partner_admin,
+				sizeof(struct port_params));
+			record_default(port);
+			ACTOR_STATE_CLR(port, EXPIRED);
+			timer_cancel(&port->current_while_timer);
+		} else {
+			SM_FLAG_SET(port, EXPIRED);
+			ACTOR_STATE_SET(port, EXPIRED);
+			PARTNER_STATE_CLR(port, SYNCHRONIZATION);
+			PARTNER_STATE_SET(port, LACP_SHORT_TIMEOUT);
+			timer_set(&port->current_while_timer,
+				internals->mode4.short_timeout);
+		}
  	}
  }
 
@@ -1021,6 +1033,7 @@ bond_mode_8023ad_activate_slave(struct rte_eth_dev *bond_dev,
  	port->actor.port_number = rte_cpu_to_be_16(slave_id + 1);
 
  	memcpy(&port->partner, &initial, sizeof(struct port_params));
+	memcpy(&port->partner_admin, &initial, sizeof(struct port_params));
 
  	/* default states */
  	port->actor_state = STATE_AGGREGATION | STATE_LACP_ACTIVE | STATE_DEFAULTED;
Applied
#5 lore raw
Quoted 39 lines · Wei Hu (Xavier)

Hi, Weifeng Li

Quoted 35 lines · Weifeng Li

A dpdk bonding 802.3ad network as follows:

+----------+                        +-----------+
|dpdk lacp |bond1.1 <------> bond2.1|switch lacp|
|          |bond1.2 <------> bond2.2|           |
+----------+                        +-----------+

If a fiber optic go wrong about single pass during normal running like this:
bond1.2 -----> bond2.2 ok
bond1.2 <--x-- bond2.2 error: bond1.2 receive no LACPDU Some packets from
switch to dpdk will choose bond2.2 and lost.

DPDK lacp state machine will transits to the expired state if no LACPDU is received before the current_while_timer expires. But if no LACPDU is received before the current_while_timer expires again, DPDK lacp state machine has no change. Bond2.2 can not change to inactive depend on the received LACPDU.
According to IEEE 802.3ad, if no lacpdu is received before the current_while_timer expires again, the state machine should transits from expired to defaulted. Bond2.2 will change to inactive depend on the LACPDU with defaulted state.

This patch adds a state machine change from expired to defaulted when no lacpdu is received before the current_while_timer expires again according to IEEE 802.3ad:
If no LACPDU is received before the current_while timer expires again, the state machine transits to the DEFAULTED state. The record Default function overwrites the current operational parameters for the Partner with administratively configured values. This allows configuration of aggregations and individual links when no protocol partner is present, while still permitting an active partner to override default settings. The update_Default_Selected function sets the Selected variable FALSE if the Link Aggregation Group has changed. Since all operational parameters are now set to locally administered values there can be no disagreement as to the Link Aggregation Group, so the Matched variable is set TRUE.

Quoted 9 lines
Quoted 2 lines

The relevant description is in the chapter 43.4.12 of the link below:
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=850426

Fixes 46fb43683679 ("bond: add mode 4")
Quoted 1 line

Applied to dpdk-next-net/master, thanks.