Skip to contentSkip to conversation

dt-bindings: arm: amlogic: add support for the WeTek Core 2

PATCH Superseded Christian Hewitt 2 participants 3 messages Jul 18, 2020 – Jul 21, 2020

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 dt-bindings: arm: amlogic: add support for the WeTek Core 2

The WeTek Core 2 is a commercial Android device based on the Amlogic Q200 reference design using the S912-H chipset. Specs:

3GB DDR3 RAM
32GB eMMC storage
10/100 Ethernet using Realtek RTL8152 (internal USB) 802.11 a/b/g/n/ac + BT 4.1 sdio wireless module (AP6356S) 2x single colour LEDs to indicate power
1x power button
1x reset button on the underside of the box
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack S/PDIF audio output
2x USB 2.0 ports
1x USB OTG port (internal)
1x micro SD card slot
UART pins (internal)
IR Sensor

---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +1 -0
index 378229fa8310..5eba9f48823e 100644
@@ -121,6 +121,7 @@ properties:
               - libretech,aml-s912-pc
               - nexbox,a1
               - tronsmart,vega-s96
+              - wetek,core2
           - const: amlogic,s912
           - const: amlogic,meson-gxm
 
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 2/2 arm64: dts: meson: add support for the WeTek Core 2

The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences:

- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
- uart_AO can be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)

---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/meson-gxm-wetek-core2.dts     | 87 +++++++++++++++++++
 2 files changed, 88 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
index 5cac4d1d487d..4e2239ffcaa5 100644
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +87 -0

87 lines not on this page · raw message

Signature · 1 line
2.17.1
Reviewed-by on v2 2/2
#2 lore raw

Re: [PATCH v2 2/2] arm64: dts: meson: add support for the WeTek Core 2

Quoted 112 lines · Christian Hewitt

The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences:

- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
- uart_AO can be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)

---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/meson-gxm-wetek-core2.dts     | 87 +++++++++++++++++++
 2 files changed, 88 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
index 5cac4d1d487d..4e2239ffcaa5 100644
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +77 -0
new file mode 100644
index 000000000000..b81f90015bd0
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";

arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts line 87

Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +10 -0
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};