Add support for GPU DDR BW scaling
Subsystems (8)
v6 cover Add support for GPU DDR BW scaling
This series add support for GPU DDR bandwidth scaling and is based on the bindings from Georgi [1]. This is mostly a rebase of Sharat's patches [2] on the tip of msm-next branch.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/vireshk/pm/+log/opp/linux-next/
[2] https://patchwork.freedesktop.org/series/75291/
Changes from v5:
- Added "interconnect-names" property
Changes from v4:
- Squashed a patch to another one to fix Jonathan's comment
- Add back the pm_runtime_get_if_in_use() check
Changes from v3:
- Rebased on top of Jonathan's patch which adds support for changing gpu freq through hfi on newer targets
- As suggested by Rob, left the icc_path intact for pre-a6xx GPUs
Sharat Masetty (6):
dt-bindings: drm/msm/gpu: Document gpu opp table
drm: msm: a6xx: send opp instead of a frequency
drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
arm64: dts: qcom: sc7180: Add interconnects property for GPU
arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp
.../devicetree/bindings/display/msm/gpu.txt | 28 ++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 10 ++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++ drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 108 ++++++++++++--------- drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 2 +- drivers/gpu/drm/msm/msm_gpu.c | 3 +- drivers/gpu/drm/msm/msm_gpu.h | 3 +- 7 files changed, 114 insertions(+), 50 deletions(-)
Signature · 1 line
2.7.4
PATCH v6 1/6 dt-bindings: drm/msm/gpu: Document gpu opp table
From: Sharat Masetty <[email protected]>
Update documentation to list the gpu opp table bindings including the newly added "opp-peak-kBps" needed for GPU-DDR bandwidth scaling.
--- .../devicetree/bindings/display/msm/gpu.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
Documentation/devicetree/bindings/display/msm/gpu.txt +28 -0
@@ -112,6 +112,34 @@ Example a6xx (with GMU): interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + qcom,gmu = <&gmu>; zap-shader {
Signature · 1 line
2.7.4
PATCH v6 2/6 drm: msm: a6xx: send opp instead of a frequency
In reply to Akhil P OommenFrom: Sharat Masetty <[email protected]>
This patch changes the plumbing to send the devfreq recommended opp rather than the frequency. Also consolidate and rearrange the code in a6xx to set the GPU frequency and the icc vote in preparation for the upcoming changes for GPU->DDR scaling votes.
--- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 89 +++++++++++++++++++---------------- drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 2 +- drivers/gpu/drm/msm/msm_gpu.c | 3 +- drivers/gpu/drm/msm/msm_gpu.h | 3 +- 4 files changed, 52 insertions(+), 45 deletions(-)
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +48 -41
@@ -103,17 +103,45 @@ bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu) A6XX_GMU_SPTPRAC_PWR_CLK_STATUS_GX_HM_CLK_OFF)); } -static void __a6xx_gmu_set_freq (struct a6xx_gmu *gmu,int index) +void a6xx_gmu_set_freq (struct msm_gpu *gpu,struct dev_pm_opp *opp) { - struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); -struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; -struct msm_gpu *gpu = &adreno_gpu->base; -int ret; +struct adreno_gpu *adreno_gpu =to_adreno_gpu (gpu); +struct a6xx_gpu *a6xx_gpu =to_a6xx_gpu (adreno_gpu); +struct a6xx_gmu *gmu = &a6xx_gpu->gmu; +u32 perf_index; +unsigned long gpu_freq; +int ret =0 ; + + gpu_freq =dev_pm_opp_get_freq (opp); + +if (gpu_freq == gmu->freq) +return ; + +for (perf_index =0 ; perf_index < gmu->nr_gpu_freqs -1 ; perf_index++) +if (gpu_freq == gmu->gpu_freqs[perf_index]) +break ; + + gmu->current_perf_index = perf_index; + gmu->freq = gmu->gpu_freqs[perf_index]; + +/* +* This can get called from devfreq while the hardware is idle. Don't +* bring up the power if it isn't already active +*/ +if (pm_runtime_get_if_in_use (gmu->dev) ==0 ) +return ; + +if (!gmu->legacy) { +a6xx_hfi_set_freq (gmu, perf_index); +icc_set_bw (gpu->icc_path,0 ,MBps_to_icc (7216 )); +pm_runtime_put (gmu->dev); +return ; + }gmu_write (gmu,REG_A6XX_GMU_DCVS_ACK_OPTION ,0 );gmu_write (gmu,REG_A6XX_GMU_DCVS_PERF_SETTING , - ((3 &0xf ) <<28 ) | index); + ((3 &0xf ) <<28 ) | perf_index);/* * Send an invalid index as a vote for the bus bandwidth and let the
@@ -134,37 +162,6 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)* for now leave it at max so that the performance is nominal. */ icc_set_bw (gpu->icc_path,0 ,MBps_to_icc (7216 )); -} - -void a6xx_gmu_set_freq (struct msm_gpu *gpu,unsigned long freq) -{ -struct adreno_gpu *adreno_gpu =to_adreno_gpu (gpu); -struct a6xx_gpu *a6xx_gpu =to_a6xx_gpu (adreno_gpu); -struct a6xx_gmu *gmu = &a6xx_gpu->gmu; -u32 perf_index =0 ; - -if (freq == gmu->freq) -return ; - -for (perf_index =0 ; perf_index < gmu->nr_gpu_freqs -1 ; perf_index++) -if (freq == gmu->gpu_freqs[perf_index]) -break ; - - gmu->current_perf_index = perf_index; - gmu->freq = gmu->gpu_freqs[perf_index]; - -/* -* This can get called from devfreq while the hardware is idle. Don't -* bring up the power if it isn't already active -*/ -if (pm_runtime_get_if_in_use (gmu->dev) ==0 ) -return ; - -if (gmu->legacy) -__a6xx_gmu_set_freq (gmu, perf_index); -else -a6xx_hfi_set_freq (gmu, perf_index); -pm_runtime_put (gmu->dev); }
@@ -839,6 +836,19 @@ static void a6xx_gmu_force_off(struct a6xx_gmu *gmu)a6xx_gmu_rpmh_off (gmu); } +static void a6xx_gmu_set_initial_freq (struct msm_gpu *gpu,struct a6xx_gmu *gmu) +{ +struct dev_pm_opp *gpu_opp; +unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index]; + + gpu_opp =dev_pm_opp_find_freq_exact (&gpu->pdev->dev, gpu_freq, true); +if (IS_ERR_OR_NULL (gpu_opp)) +return ; + +a6xx_gmu_set_freq (gpu, gpu_opp); +dev_pm_opp_put (gpu_opp); +} +int a6xx_gmu_resume (struct a6xx_gpu *a6xx_gpu) {struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
@@ -898,10 +908,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)enable_irq (gmu->hfi_irq);/* Set the GPU to the current freq */ -if (gmu->legacy) -__a6xx_gmu_set_freq (gmu, gmu->current_perf_index); -else -a6xx_hfi_set_freq (gmu, gmu->current_perf_index); +a6xx_gmu_set_initial_freq (gpu, gmu);/* * "enable" the GX power domain which won't actually do anything but it
drivers/gpu/drm/msm/adreno/a6xx_gpu.h +1 -1
@@ -63,7 +63,7 @@ void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state);int a6xx_gmu_init (struct a6xx_gpu *a6xx_gpu,struct device_node *node);void a6xx_gmu_remove (struct a6xx_gpu *a6xx_gpu); -void a6xx_gmu_set_freq (struct msm_gpu *gpu,unsigned long freq); +void a6xx_gmu_set_freq (struct msm_gpu *gpu,struct dev_pm_opp *opp);unsigned long a6xx_gmu_get_freq (struct msm_gpu *gpu); void a6xx_show(struct msm_gpu *gpu, struct msm_gpu_state *state,
drivers/gpu/drm/msm/msm_gpu.c +1 -2
@@ -13,7 +13,6 @@#include <generated/utsrelease.h> #include <linux/string_helpers.h> -#include <linux/pm_opp.h> #include <linux/devfreq.h> #include <linux/devcoredump.h> #include <linux/sched/task.h>
@@ -34,7 +33,7 @@ static int msm_devfreq_target(struct device *dev, unsigned long *freq,return PTR_ERR (opp);if (gpu->funcs->gpu_set_freq) - gpu->funcs->gpu_set_freq (gpu, (u64)*freq); + gpu->funcs->gpu_set_freq (gpu, opp);else clk_set_rate (gpu->core_clk, *freq);
drivers/gpu/drm/msm/msm_gpu.h +2 -1
@@ -9,6 +9,7 @@#include <linux/clk.h> #include <linux/interconnect.h> +#include <linux/pm_opp.h> #include <linux/regulator/consumer.h> #include "msm_drv.h"
@@ -61,7 +62,7 @@ struct msm_gpu_funcs {struct msm_gpu_state *(*gpu_state_get)(struct msm_gpu *gpu);int (*gpu_state_put)(struct msm_gpu_state *state);unsigned long (*gpu_get_freq)(struct msm_gpu *gpu); -void (*gpu_set_freq)(struct msm_gpu *gpu,unsigned long freq); +void (*gpu_set_freq)(struct msm_gpu *gpu,struct dev_pm_opp *opp);struct msm_gem_address_space *(*create_address_space) (struct msm_gpu *gpu,struct platform_device *pdev); };
Signature · 1 line
2.7.4
PATCH v6 3/6 drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
In reply to Akhil P OommenFrom: Sharat Masetty <[email protected]>
This patches replaces the previously used static DDR vote and uses dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling GPU frequency. Also since the icc path voting is handled completely in the opp driver, remove the icc_path handle and its usage in the drm driver.
--- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +17 -8
@@ -133,7 +133,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)if (!gmu->legacy) {a6xx_hfi_set_freq (gmu, perf_index); -icc_set_bw (gpu->icc_path,0 ,MBps_to_icc (7216 )); +dev_pm_opp_set_bw (&gpu->pdev->dev, opp);pm_runtime_put (gmu->dev);return ; }
@@ -157,11 +157,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)if (ret)dev_err (gmu->dev,"GMU set GPU frequency error: %d\n" , ret); -/* -* Eventually we will want to scale the path vote with the frequency but -* for now leave it at max so that the performance is nominal. -*/ -icc_set_bw (gpu->icc_path,0 ,MBps_to_icc (7216 )); +dev_pm_opp_set_bw (&gpu->pdev->dev, opp);pm_runtime_put (gmu->dev); }
@@ -849,6 +845,19 @@ static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)dev_pm_opp_put (gpu_opp); } +static void a6xx_gmu_set_initial_bw (struct msm_gpu *gpu,struct a6xx_gmu *gmu) +{ +struct dev_pm_opp *gpu_opp; +unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index]; + + gpu_opp =dev_pm_opp_find_freq_exact (&gpu->pdev->dev, gpu_freq, true); +if (IS_ERR_OR_NULL (gpu_opp)) +return ; + +dev_pm_opp_set_bw (&gpu->pdev->dev, gpu_opp); +dev_pm_opp_put (gpu_opp); +} +int a6xx_gmu_resume (struct a6xx_gpu *a6xx_gpu) {struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
@@ -873,7 +882,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu) }/* Set the bus quota to a reasonable value for boot */ -icc_set_bw (gpu->icc_path,0 ,MBps_to_icc (3072 )); +a6xx_gmu_set_initial_bw (gpu, gmu);/* Enable the GMU interrupt */ gmu_write (gmu,REG_A6XX_GMU_AO_HOST_INTERRUPT_CLR , ~0 );
@@ -1049,7 +1058,7 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)a6xx_gmu_shutdown (gmu);/* Remove the bus vote */ -icc_set_bw (gpu->icc_path,0 ,0 ); +dev_pm_opp_set_bw (&gpu->pdev->dev,NULL );/* * Make sure the GX domain is off before turning off the GMU (CX)
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
kernel test robot
build botRe: [PATCH v6 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
Thank you for the patch! Yet something to improve:
Hi Akhil,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on linux/master linus/master v5.8-rc5] [cannot apply to next-20200717]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Akhil-P-Oommen/Add-support-for-GPU-DDR-BW-scaling/20200717-213227 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next config: arm-randconfig-r026-20200717 (attached as .config) compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
drivers/gpu/drm/msm/adreno/a6xx_gmu.c: In function 'a6xx_gmu_set_freq':
>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c:136:3: error: implicit declaration of function 'dev_pm_opp_set_bw'; did you mean 'dev_pm_opp_set_rate'? [-Werror=implicit-function-declaration]
136 | dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
| ^~~~~~~~~~~~~~~~~
| dev_pm_opp_set_ratecc1: some warnings being treated as errors
vim +136 drivers/gpu/drm/msm/adreno/a6xx_gmu.c
105
106 void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
107 {
108 struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
109 struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
110 struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
111 u32 perf_index;
112 unsigned long gpu_freq;
113 int ret = 0;
114
115 gpu_freq = dev_pm_opp_get_freq(opp);
116
117 if (gpu_freq == gmu->freq)
118 return;
119
120 for (perf_index = 0; perf_index < gmu->nr_gpu_freqs - 1; perf_index++)
121 if (gpu_freq == gmu->gpu_freqs[perf_index])
122 break;
123
124 gmu->current_perf_index = perf_index;
125 gmu->freq = gmu->gpu_freqs[perf_index];
126
127 /*
128 * This can get called from devfreq while the hardware is idle. Don't
129 * bring up the power if it isn't already active
130 */
131 if (pm_runtime_get_if_in_use(gmu->dev) == 0)
132 return;
133
134 if (!gmu->legacy) {
135 a6xx_hfi_set_freq(gmu, perf_index);
> 136 dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
137 pm_runtime_put(gmu->dev);
138 return;
139 }
140
141 gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
142
143 gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
144 ((3 & 0xf) << 28) | perf_index);
145
146 /*
147 * Send an invalid index as a vote for the bus bandwidth and let the
148 * firmware decide on the right vote
149 */
150 gmu_write(gmu, REG_A6XX_GMU_DCVS_BW_SETTING, 0xff);
151
152 /* Set and clear the OOB for DCVS to trigger the GMU */
153 a6xx_gmu_set_oob(gmu, GMU_OOB_DCVS_SET);
154 a6xx_gmu_clear_oob(gmu, GMU_OOB_DCVS_SET);
155
156 ret = gmu_read(gmu, REG_A6XX_GMU_DCVS_RETURN);
157 if (ret)
158 dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
159
160 dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
161 pm_runtime_put(gmu->dev);
162 }
163
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
PATCH v6 4/6 arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling
In reply to Akhil P OommenFrom: Sharat Masetty <[email protected]>
This patch adds the interconnects property for the gpu node and the opp-peak-kBps property to the opps of the gpu opp table. This should help enable DDR bandwidth scaling dynamically and proportionally to the GPU frequency.
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +10 -0
@@ -3515,42 +3515,52 @@ qcom,gmu = <&gmu>; + interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-710000000 { opp-hz = /bits/ 64 <710000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <7216000>; }; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <7216000>; }; opp-596000000 { opp-hz = /bits/ 64 <596000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <6220000>; }; opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <6220000>; }; opp-414000000 { opp-hz = /bits/ 64 <414000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <4068000>; }; opp-342000000 { opp-hz = /bits/ 64 <342000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <2724000>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <1648000>; }; }; };
Signature · 1 line
2.7.4
PATCH v6 5/6 arm64: dts: qcom: sc7180: Add interconnects property for GPU
In reply to Akhil P OommenFrom: Sharat Masetty <[email protected]>
This patch adds the interconnects property to the GPU node. This enables the GPU->DDR path bandwidth voting.
--- arch/arm64/boot/dts/qcom/sc7180.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +3 -0
@@ -1470,6 +1470,9 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2";
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v6 6/6 arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp
In reply to Akhil P OommenFrom: Sharat Masetty <[email protected]>
Add opp-peak-kBps bindings to the GPU opp table, listing the peak GPU -> DDR bandwidth requirement for each opp level. This will be used to scale the DDR bandwidth along with the GPU frequency dynamically.
--- arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +7 -0
@@ -1479,36 +1479,43 @@ opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <8532000>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <7216000>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <5412000>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; }; }; };
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel