Support flash devices used on Pensando boards
Subsystems (2)
v2 cover Support flash devices used on Pensando boards
Changes since v1:
- Added test descriptions to the patches.
Pensando boards use Macronix and Micron flash devices in x2 mode. This patchset adds support for the previously unlisted Macronix mx66u2g45g, and it enables x2 mode on the Micron mt25qu02g.
This patchset applies to the spi-nor/next tree.
David Clear (2):
mtd: spi-nor: Add support for Macronix mx66u2g45g.
mtd: spi-nor: Support SPI_NOR_DUAL_READ on Micron mt25qu02g.
drivers/mtd/spi-nor/macronix.c | 3 +++ drivers/mtd/spi-nor/micron-st.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-)
base-commit: fb249e1007e0270e305ea674012dcc4f95f1304e
Signature · 6 lines
2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v2 1/2 mtd: spi-nor: Add support for Macronix mx66u2g45g.
The Macronix mx66u2g45g is a 1.8V, 2Gbit (256MB) device that supports x1, x2, or x4 operation.
Tested on Pensando SoC hardware with a cadence quadspi controller via drivers/spi/spi-cadence-quadspi.c, in x2 mode at 50MHz.
- random data write, erase, read - verified erase operations
- random data write, read/compare - verified write/read operations
--- drivers/mtd/spi-nor/macronix.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/mtd/spi-nor/macronix.c +3 -0
@@ -87,6 +87,9 @@ static const struct flash_info macronix_parts[] = { SPI_NOR_QUAD_READ) }, {"mx66l1g55g" ,INFO (0xc2261b ,0 ,64 *1024 ,2048 , SPI_NOR_QUAD_READ) }, + { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096, +SECT_4K |SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, };static void macronix_default_init (struct spi_nor *nor)
Signature · 6 lines
2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v2 2/2 mtd: spi-nor: Support SPI_NOR_DUAL_READ on Micron mt25qu02g.
In reply to David ClearThe Micron mt25qu02g supports both x2 and x4 transactions. Add the SPI_NOR_DUAL_READ to its spi_nor_ids[] table entry.
Tested on Pensando SoC hardware with a cadence quadspi controller via drivers/spi/spi-cadence-quadspi.c, in x2 mode at 50MHz.
- random data write, erase, read - verified erase operations
- random data write, read/compare - verified write/read operations
--- drivers/mtd/spi-nor/micron-st.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mtd/spi-nor/micron-st.c +2 -2
@@ -71,8 +71,8 @@ static const struct flash_info st_parts[] = {SECT_4K |USE_FSR |SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, -SECT_4K |USE_FSR |SPI_NOR_QUAD_READ | - NO_CHIP_ERASE) }, +SECT_4K |USE_FSR |SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
Signature · 6 lines
2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Tudor Ambarus
AppliedQuoted 8 lines · David Clear
Changes since v1:
- Added test descriptions to the patches.Pensando boards use Macronix and Micron flash devices in x2 mode. This patchset adds support for the previously unlisted Macronix mx66u2g45g, and it enables x2 mode on the Micron mt25qu02g.
[...]
Applied to spi-nor/next, thanks!
[1/2] mtd: spi-nor: macronix: Add support for mx66u2g45g
https://git.kernel.org/mtd/c/48029e620dec [2/2] mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g https://git.kernel.org/mtd/c/1371a80cac33
Best regards,
Signature · 5 lines
Tudor Ambarus <[email protected]> ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/