dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding
Subsystems (2)
PATCH v2 1/1 dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding
Problem:
adm1272 and adm1278 supports temperature sampling. The
current way of enabling it requires the user manually unbind the device from the driver, flip the temperature sampling control bit and then bind the device back to the driver. It would be nice if we can control this in a better way by reading the dt.
Solution:
Introducing device tree binding analog-temperature1-enable. If the
flag is set, flip the temp1_en control bit on probing.
Testing:
make dt_binding_check
---
ChangeLog v1->v2:
- Rename adm1272-adm1278-temp1-en to analog-temperature1-enable
Documentation/devicetree/bindings/hwmon/adm1275.txt | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/hwmon/adm1275.txt +3 -0
@@ -15,6 +15,8 @@ Optional properties: - shunt-resistor-micro-ohms Shunt resistor value in micro-Ohm +- analog-temperature1-enable + Enable temperature sampling. This is supported on adm1272 and adm1278 Example:
@@ -22,4 +24,5 @@ adm1272@10 { compatible = "adi,adm1272"; reg = <0x10>; shunt-resistor-micro-ohms = <500>; + analog-temperature1-enable; };
Signature · 1 line
2.28.0.rc0.105.gf9edc3c819-goog
Guenter Roeck
maintainerQuoted 11 lines · Chu Lin
Problem:
adm1272 and adm1278 supports temperature sampling. The
current way of enabling it requires the user manually unbind the device from the driver, flip the temperature sampling control bit and then bind the device back to the driver. It would be nice if we can control this in a better way by reading the dt.Solution:
Introducing device tree binding analog-temperature1-enable. If the
flag is set, flip thetemp1_encontrol bit on probing.
Quoted 7 lines
Testing:
makedt_binding_checkSigned-off-by Chu Lin <[email protected]>---
ChangeLogv1->v2:
- Rename adm1272-adm1278-temp1-en to analog-temperature1-enable
This needs to be either analog,temperature1-enable or analog,temp1-enable (comma instead of '-').
Thanks,
Guenter
Quoted 26 lines
Documentation/devicetree/bindings/hwmon/adm1275.txt | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/hwmon/adm1275.txt +3
-0@@ -15,6 +15,8 @@ Optional properties: - shunt-resistor-micro-ohms Shunt resistor value in micro-Ohm +- analog-temperature1-enable + Enable temperature sampling. This is supported on adm1272 and adm1278 Example:@@ -22,4 +24,5 @@ adm1272@10 { compatible = "adi,adm1272"; reg = <0x10>; shunt-resistor-micro-ohms = <500>; + analog-temperature1-enable; };Signature · 1 line
2.28.0.rc0.105.gf9edc3c819-goog