serial: meson: handle RX errors
PATCH 1/1 serial: meson: handle RX errors
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected.
When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot.
This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO.
--- drivers/serial/serial_meson.c | 43 +++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-)
drivers/serial/serial_meson.c +39 -4
@@ -65,14 +65,36 @@ static int meson_serial_probe(struct udevice *dev)return 0 ; } +static void meson_serial_rx_error (struct udevice *dev) +{ +struct meson_serial_platdata *plat = dev->platdata; +struct meson_uart *const uart = plat->reg; +u32 val =readl (&uart->control); + +/* Clear error */ + val |=AML_UART_CLR_ERR ; +writel (val, &uart->control); + val &= ~AML_UART_CLR_ERR ; +writel (val, &uart->control); + +/* Remove spurious byte from fifo */ +readl (&uart->rfifo); +} +static int meson_serial_getc (struct udevice *dev) {struct meson_serial_platdata *plat = dev->platdata;struct meson_uart *const uart = plat->reg; +uint32_t status =readl (&uart->status); -if (readl (&uart->status) &AML_UART_RX_EMPTY ) +if (status &AML_UART_RX_EMPTY )return -EAGAIN ; +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev); +return -EIO ; + } +return readl (&uart->rfifo) &0xff ; }
@@ -95,10 +117,23 @@ static int meson_serial_pending(struct udevice *dev, bool input)struct meson_uart *const uart = plat->reg;uint32_t status =readl (&uart->status); -if (input) -return !(status &AML_UART_RX_EMPTY ); -else +if (input) { +if (status &AML_UART_RX_EMPTY ) +return false; + +/* +* Handle and drop any RX error here to avoid +* returning true here when an error byte is in the FIFO +*/ +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev); +return false; + } + +return true; + }else {return !(status &AML_UART_TX_FULL ); + } }static int meson_serial_ofdata_to_platdata (struct udevice *dev)
Signature · 1 line
2.22.0
PATCH 1/1 serial: meson: handle RX errors
Hi Neil,
Quoted 75 lines · Neil Armstrong
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected.
When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot.
This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO.
Fixes bfcef28ae4 ("arm: add initial support for Amlogic Meson and ODROID-C2")Signed-off-by Neil Armstrong <[email protected]>--- drivers/serial/serial_meson.c | 43 +++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-)drivers/serial/serial_meson.c +33
-4@@ -65,14 +65,36 @@ static int meson_serial_probe(struct udevice *dev)return 0 ; } +static void meson_serial_rx_error (struct udevice *dev) +{ +struct meson_serial_platdata *plat = dev->platdata; +struct meson_uart *const uart = plat->reg; +u32 val =readl (&uart->control); + +/* Clear error */ + val |=AML_UART_CLR_ERR ; +writel (val, &uart->control); + val &= ~AML_UART_CLR_ERR ; +writel (val, &uart->control); + +/* Remove spurious byte from fifo */ +readl (&uart->rfifo); +} +static int meson_serial_getc (struct udevice *dev) {struct meson_serial_platdata *plat = dev->platdata;struct meson_uart *const uart = plat->reg; +uint32_t status =readl (&uart->status); -if (readl (&uart->status) &AML_UART_RX_EMPTY ) +if (status &AML_UART_RX_EMPTY )return -EAGAIN ; +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev); +return -EIO ; + } +return readl (&uart->rfifo) &0xff ; }@@ -95,10 +117,23 @@ static int meson_serial_pending(struct udevice *dev, bool input)struct meson_uart *const uart = plat->reg;uint32_t status =readl (&uart->status); -if (input) -return !(status &AML_UART_RX_EMPTY ); -else +if (input) { +if (status &AML_UART_RX_EMPTY ) +return false; + +/* +* Handle and drop any RX error here to avoid +* returning true here when an error byte is in the FIFO +*/ +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev);
drivers/serial/serial_meson.c static int meson_serial_pending(struct udevice *dev, bool input) · line 139
Quoted 10 lines
drivers/serial/serial_meson.c +6
-0+return false; + } + +return true; + }else {return !(status &AML_UART_TX_FULL ); + } }static int meson_serial_ofdata_to_platdata (struct udevice *dev)
on Khadas VIM3L
thanks for this patch.
Guillaume
PATCH 1/1 serial: meson: handle RX errors
In reply to Neil ArmstrongQuoted 76 lines · Neil Armstrong
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected.
When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot.
This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO.
Fixes bfcef28ae4 ("arm: add initial support for Amlogic Meson and ODROID-C2")Signed-off-by Neil Armstrong <[email protected]>--- drivers/serial/serial_meson.c | 43 +++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-)drivers/serial/serial_meson.c +33
-4@@ -65,14 +65,36 @@ static int meson_serial_probe(struct udevice *dev)return 0 ; } +static void meson_serial_rx_error (struct udevice *dev) +{ +struct meson_serial_platdata *plat = dev->platdata; +struct meson_uart *const uart = plat->reg; +u32 val =readl (&uart->control); + +/* Clear error */ + val |=AML_UART_CLR_ERR ; +writel (val, &uart->control); + val &= ~AML_UART_CLR_ERR ; +writel (val, &uart->control); + +/* Remove spurious byte from fifo */ +readl (&uart->rfifo); +} +static int meson_serial_getc (struct udevice *dev) {struct meson_serial_platdata *plat = dev->platdata;struct meson_uart *const uart = plat->reg; +uint32_t status =readl (&uart->status); -if (readl (&uart->status) &AML_UART_RX_EMPTY ) +if (status &AML_UART_RX_EMPTY )return -EAGAIN ; +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev); +return -EIO ; + } +return readl (&uart->rfifo) &0xff ; }@@ -95,10 +117,23 @@ static int meson_serial_pending(struct udevice *dev, bool input)struct meson_uart *const uart = plat->reg;uint32_t status =readl (&uart->status); -if (input) -return !(status &AML_UART_RX_EMPTY ); -else +if (input) { +if (status &AML_UART_RX_EMPTY ) +return false; + +/* +* Handle and drop any RX error here to avoid +* returning true here when an error byte is in the FIFO +*/ +if (status &AML_UART_ERR ) { +meson_serial_rx_error (dev);
drivers/serial/serial_meson.c static int meson_serial_pending(struct udevice *dev, bool input) · line 139
Quoted 10 lines
drivers/serial/serial_meson.c +6
-0+return false; + } + +return true; + }else {return !(status &AML_UART_TX_FULL ); + } }static int meson_serial_ofdata_to_platdata (struct udevice *dev)
Applied to u-boot-amlogic
Neil