Skip to contentSkip to conversation

qemu-img convert -n: Keep qcow2 v2 target sparse

PATCH In review Kevin Wolf 2 participants 5 messages Jul 21, 2020 Block layer

lore
Share & tools
lore

Kevin Wolf

author
#0 lore raw

v2 cover qemu-img convert -n: Keep qcow2 v2 target sparse

v2:
- Fixed iotest for IMGOPTS that contains v3-only features [Max]
- Some code cleanups in the iotest [Nir]

Kevin Wolf (2):
qcow2: Implement v2 zero writes with discard if possible
iotests: Test sparseness for qemu-img convert -n

 block/qcow2-cluster.c      |  9 ++++++++-
 tests/qemu-iotests/122     | 30 ++++++++++++++++++++++++++++++
 tests/qemu-iotests/122.out | 17 +++++++++++++++++
 3 files changed, 55 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.4
author
#1 lore raw

PATCH v2 1/2 qcow2: Implement v2 zero writes with discard if possible

qcow2 version 2 images don't support the zero flag for clusters, so for write_zeroes requests, we return -ENOTSUP and get explicit zero buffer writes. If the image doesn't have a backing file, we can do better: Just discard the respective clusters.

This is relevant for 'qemu-img convert -O qcow2 -n', where qemu-img has to assume that the existing target image may contain any data, so it has to write zeroes. Without this patch, this results in a fully allocated target image, even if the source image was empty.

---
 block/qcow2-cluster.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
block/qcow2-cluster.c +8 -1
index 4b5fc8c4a7..a677ba9f5c 100644
@@ -1797,8 +1797,15 @@ int qcow2_cluster_zeroize(BlockDriverState *bs, uint64_t offset,
     assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) ||
            end_offset >= bs->total_sectors << BDRV_SECTOR_BITS);
 
-    /* The zero flag is only supported by version 3 and newer */
+    /*
+     * The zero flag is only supported by version 3 and newer. However, if we
+     * have no backing file, we can resort to discard in version 2.
+     */
     if (s->qcow_version < 3) {
+        if (!bs->backing) {
+            return qcow2_cluster_discard(bs, offset, bytes,
+                                         QCOW2_DISCARD_REQUEST, false);
+        }
         return -ENOTSUP;
     }
 
Signature · 1 line
2.25.4
author Reviewed-by Max Reitz on v2 1/2
#2 lore raw

Re: [PATCH for-5.1 v2 1/2] qcow2: Implement v2 zero writes with discard if possible

Am 21.07.2020 um 15:55 hat Kevin Wolf geschrieben:

Quoted 5 lines

qcow2 version 2 images don't support the zero flag for clusters, so for write_zeroes requests, we return -ENOTSUP and get explicit zero buffer writes. If the image doesn't have a backing file, we can do better: Just discard the respective clusters.

Quoted 7 lines

This is relevant for 'qemu-img convert -O qcow2 -n', where qemu-img has to assume that the existing target image may contain any data, so it has to write zeroes. Without this patch, this results in a fully allocated target image, even if the source image was empty.

Oops, forgot to apply this from v1:

The patch is unchanged, so I'll include this when applying.

Kevin

author
#3 lore raw

PATCH v2 2/2 iotests: Test sparseness for qemu-img convert -n

In reply to Kevin Wolf
---
 tests/qemu-iotests/122     | 30 ++++++++++++++++++++++++++++++
 tests/qemu-iotests/122.out | 17 +++++++++++++++++
 2 files changed, 47 insertions(+)
tests/qemu-iotests/122 +30 -0
index dfd1cd05d6..0f3d4ca851 100755
@@ -281,6 +281,36 @@ $QEMU_IMG convert -O $IMGFMT -n "$TEST_IMG" "$TEST_IMG".orig
 
 $QEMU_IMG compare "$TEST_IMG" "$TEST_IMG".orig
 
+echo
+echo '=== -n to an empty image ==='
+echo
+
+TEST_IMG="$TEST_IMG".orig _make_test_img 64M
+
+# Convert with -n, which should not result in a fully allocated image, not even
+# with compat=0.10 (because the target doesn't have a backing file)
+for compat in "1.1" "0.10"; do
+    IMGOPTS="compat=$compat" _make_test_img 64M
+    $QEMU_IMG convert -O $IMGFMT -n "$TEST_IMG".orig "$TEST_IMG"
+    $QEMU_IMG map --output=json "$TEST_IMG"
+done
+
+echo
+echo '=== -n to an empty image with a backing file ==='
+echo
+
+TEST_IMG="$TEST_IMG".orig _make_test_img 64M
+TEST_IMG="$TEST_IMG".base _make_test_img 64M
+
+# Convert with -n, which should still not result in a fully allocated image for
+# compat=1.1 (because it can use zero clusters), but it should be fully
+# allocated with compat=0.10
+for compat in "1.1" "0.10"; do
+    IMGOPTS="compat=$compat" _make_test_img -b "$TEST_IMG".base -F $IMGFMT 64M
+    $QEMU_IMG convert -O $IMGFMT -n "$TEST_IMG".orig "$TEST_IMG"
+    $QEMU_IMG map --output=json "$TEST_IMG"
+done
+
 echo
 echo '=== -n -B to an image without a backing file ==='
 echo
tests/qemu-iotests/122.out +17 -0
index f1f195ed77..3a3e121d57 100644
@@ -229,6 +229,23 @@ wrote 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Images are identical.
 
+=== -n to an empty image ===
+
+Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": true, "data": false}]
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": true, "data": false}]
+
+=== -n to an empty image with a backing file ===
+
+Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": true, "data": false}]
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": false, "data": true, "offset": 327680}]
+
 === -n -B to an image without a backing file ===
 
 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
Signature · 1 line
2.25.4
Reviewed-by on v2 2/2
#4 lore raw

Re: [PATCH for-5.1 v2 2/2] iotests: Test sparseness for qemu-img convert -n

Quoted 5 lines · Kevin Wolf
---
 tests/qemu-iotests/122     | 30 ++++++++++++++++++++++++++++++
 tests/qemu-iotests/122.out | 17 +++++++++++++++++
 2 files changed, 47 insertions(+)