Skip to contentSkip to conversation

samsung: Pull for v5.9

GIT PULL New Krzysztof Kozlowski 1 participant 5 messages Jul 21, 2020

Subsystems (3)
lore
Share & tools
lore
author maintainer
#1 lore raw

[GIT PULL 2/4] arm64: dts: samsung: DTS for v5.9

The following changes since commit b3a9e3b9622ae10064826dccb4f7a52bd88c7407:

Linux 5.8-rc1 (2020-06-14 12:45:04 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-5.9

for you to fetch changes up to 229134cc51d739bc99264ee14b7a783d479ce205:

arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7 (2020-07-07 08:45:47 +0200)

----------------------------------------------------------------
Samsung DTS ARM64 changes for v5.9

1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.

----------------------------------------------------------------
Alim Akhtar (3):
arm64: dts: exynos: Add UFS node to Exynos7
arm64: dts: exynos: Fix silent hang after boot on Espresso
arm64: dts: exynos: Keep LDO12 always-on on Espresso

Krzysztof Kozlowski (5):
arm64: dts: exynos: Describe PWM interrupts on Exynos7
arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible
arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
arm64: dts: exynos: Add unit address to soc node on Exynos5433
arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7

 arch/arm64/boot/dts/exynos/exynos5433.dtsi      |  53 +++++------
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   6 ++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         | 111 ++++++++++++++++--------
 3 files changed, 103 insertions(+), 67 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#2 lore raw

[GIT PULL 3/4] ARM: samsung: mach/soc for v5.9

In reply to Krzysztof Kozlowski

The following changes since commit b3a9e3b9622ae10064826dccb4f7a52bd88c7407:

Linux 5.8-rc1 (2020-06-14 12:45:04 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.9

for you to fetch changes up to 3ecdf2a5d262df01bc100472cb909580d0fdce69:

ARM: s3c24xx: Replace HTTP links with HTTPS ones (2020-07-20 16:42:28 +0200)

----------------------------------------------------------------
Samsung mach/soc changes for v5.9

1. Restore big.LITTLE cpuidle support on Exynos542x boards.
2. Cleanups and minor fixes.

----------------------------------------------------------------
Alexander A. Klimov (1):
ARM: s3c24xx: Replace HTTP links with HTTPS ones

Guillaume Tucker (1):
ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val

Linus Walleij (1):
ARM: s3c24xx: leds: Convert to use GPIO descriptors

Marek Szyprowski (1):
ARM: exynos: MCPM: Restore big.LITTLE cpuidle support

 arch/arm/mach-exynos/exynos.c              |  2 +-
 arch/arm/mach-exynos/mcpm-exynos.c         | 10 +++--
 arch/arm/mach-s3c24xx/Kconfig              |  2 +-
 arch/arm/mach-s3c24xx/common-smdk.c        | 67 ++++++++++++++++++++----------
 arch/arm/mach-s3c24xx/mach-h1940.c         |  2 +-
 arch/arm/mach-s3c24xx/mach-mini2440.c      | 65 ++++++++++++++++++++++++-----
 arch/arm/mach-s3c24xx/mach-n30.c           | 56 +++++++++++++++++++++----
 arch/arm/mach-s3c24xx/mach-qt2410.c        | 12 +++++-
 arch/arm/mach-s3c24xx/mach-rx3715.c        |  2 +-
 arch/arm/mach-s3c24xx/mach-vr1000.c        | 38 +++++++++++++++--
 drivers/leds/leds-s3c24xx.c                | 36 ++++------------
 include/linux/platform_data/leds-s3c24xx.h |  6 ---
 12 files changed, 212 insertions(+), 86 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#3 lore raw

[GIT PULL 1/4] ARM: dts: samsung: DTS for v5.9

In reply to Krzysztof Kozlowski

The following changes since commit b3a9e3b9622ae10064826dccb4f7a52bd88c7407:

Linux 5.8-rc1 (2020-06-14 12:45:04 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-5.9

for you to fetch changes up to f37b5d3aef8db06390cb7ef25585b39f89c1dedf:

ARM: dts: exynos: Replace HTTP links with HTTPS ones (2020-07-20 16:43:28 +0200)

----------------------------------------------------------------
Samsung DTS ARM changes for v5.9

1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family, S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.

----------------------------------------------------------------
Alexander A. Klimov (1):
ARM: dts: exynos: Replace HTTP links with HTTPS ones

Anand Moon (1):
ARM: dts: exynos: Align L2 cache-controller nodename with dtschema

Jonathan Bakker (5):
ARM: dts: s5pv210: Add interrupt-controller property to gph3
ARM: dts: s5pv210: Correct fuelgauge definition on Aries
ARM: dts: s5pv210: Add support for GP2A light sensor on Aries
ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries
ARM: dts: s5pv210: Correct BCM4329 bluetooth node

Krzysztof Kozlowski (5):
ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats
ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420

Marek Szyprowski (3):
ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data
ARM: dts: exynos: Enable Bluetooth support for Artik5 board
ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family

 arch/arm/boot/dts/exynos3250-artik5.dtsi        |  41 ++++++++
 arch/arm/boot/dts/exynos3250.dtsi               |  47 ++++-----
 arch/arm/boot/dts/exynos4.dtsi                  |  70 ++++++-------
 arch/arm/boot/dts/exynos4210-trats.dts          |  98 +++++++++---------
 arch/arm/boot/dts/exynos4210-universal_c210.dts |  28 ++---
 arch/arm/boot/dts/exynos4210.dtsi               |   2 +-
 arch/arm/boot/dts/exynos4412-origen.dts         |  21 ++--
 arch/arm/boot/dts/exynos4412.dtsi               |   2 +-
 arch/arm/boot/dts/exynos5250-arndale.dts        |  86 +++++++---------
 arch/arm/boot/dts/exynos5250.dtsi               |  92 ++++++++---------
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi       |   2 +-
 arch/arm/boot/dts/exynos5410.dtsi               |  46 ++++-----
 arch/arm/boot/dts/exynos5420-smdk5420.dts       |  53 ++++------
 arch/arm/boot/dts/exynos5420.dtsi               | 130 +++++++++++-------------
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi   |   6 --
 arch/arm/boot/dts/exynos5800.dtsi               |   6 +-
 arch/arm/boot/dts/s5pv210-aries.dtsi            |  90 ++++++++++++++--
 arch/arm/boot/dts/s5pv210-fascinate4g.dts       |  17 ++++
 arch/arm/boot/dts/s5pv210-pinctrl.dtsi          |   2 +
 19 files changed, 445 insertions(+), 394 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#4 lore raw

PATCH 4/4 soc: samsung: exynos-regulator-coupler: Add simple voltage coupler for Exynos5800

In reply to Krzysztof Kozlowski

From: Marek Szyprowski <[email protected]>

Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which require coupling between "vdd_arm" and "vdd_int" regulators. This coupler ensures that the voltage values don't go below the bootloader-selected operation point during the boot process until the clients set their constraints. It is achieved by assuming minimal voltage value equal to the current value if no constraints are set. This also ensures proper voltage balancing if any of the client driver is missing.

The balancing code comes from the regulator/core.c with the additional logic for handling regulators without client constraints applied added.

---
 arch/arm/mach-exynos/Kconfig                  |   1 +
 drivers/soc/samsung/Kconfig                   |   3 +
 drivers/soc/samsung/Makefile                  |   1 +
 .../soc/samsung/exynos-regulator-coupler.c    | 221 ++++++++++++++++++
 4 files changed, 226 insertions(+)
 create mode 100644 drivers/soc/samsung/exynos-regulator-coupler.c
arch/arm/mach-exynos/Kconfig +1 -0
index 76838255b5fa..f185cd3d4c62 100644
@@ -118,6 +118,7 @@ config SOC_EXYNOS5800
 	bool "Samsung EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
+	select EXYNOS_REGULATOR_COUPLER
 
 config EXYNOS_MCPM
 	bool
drivers/soc/samsung/Kconfig +3 -0
index c7a2003687c7..264185664594 100644
@@ -37,4 +37,7 @@ config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST
 	depends on PM_GENERIC_DOMAINS || COMPILE_TEST
 
+config EXYNOS_REGULATOR_COUPLER
+	bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
+	depends on ARCH_EXYNOS || COMPILE_TEST
 endif
drivers/soc/samsung/Makefile +1 -0
index edd1d6ea064d..ecc3a32f6406 100644
@@ -9,3 +9,4 @@ obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o
 obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \
 					exynos5250-pmu.o exynos5420-pmu.o
 obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
drivers/soc/samsung/exynos-regulator-coupler.c new file +221 -0

221 lines not on this page · raw message

Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel