Skip to contentSkip to conversation

media: i2c: ov2740: get OTP data ready before nvmem registration

PATCH Superseded Bingbu Cao 2 participants 2 messages Jul 21, 2020 – Jul 22, 2020

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Bingbu Cao

author
#0 lore raw

PATCH 1/1 media: i2c: ov2740: get OTP data ready before nvmem registration

The OTP data was not ready after registered as nvmem device, it is risky as the nvmem read may happen once the device exists, this patch get the OTP data ready before registering the nvmem device. OTP data missing should not break the normal camera sensor probe, so use a warning instead of an error message.

---
 drivers/media/i2c/ov2740.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/media/i2c/ov2740.c +12 -10
index fd0b6a903ec1..ae4b58da7be4 100644
@@ -1018,6 +1018,10 @@ static int ov2740_register_nvmem(struct i2c_client *client)
 	if (!nvm)
 		return -ENOMEM;
 
+	nvm->nvm_buffer = devm_kzalloc(dev, CUSTOMER_USE_OTP_SIZE, GFP_KERNEL);
+	if (!nvm->nvm_buffer)
+		return -ENOMEM;
+
 	regmap_config.val_bits = 8;
 	regmap_config.reg_bits = 16;
 	regmap_config.disable_locking = true;
@@ -1027,6 +1031,12 @@ static int ov2740_register_nvmem(struct i2c_client *client)
 
 	nvm->regmap = regmap;
 
+	ret = ov2740_load_otp_data(client, nvm);
+	if (ret) {
+		dev_err(dev, "failed to load OTP data, ret %d\n", ret);
+		return ret;
+	}
+
 	nvmem_config.name = dev_name(dev);
 	nvmem_config.dev = dev;
 	nvmem_config.read_only = true;
@@ -1045,15 +1055,7 @@ static int ov2740_register_nvmem(struct i2c_client *client)
 	if (IS_ERR(nvm->nvmem))
 		return PTR_ERR(nvm->nvmem);
 
-	nvm->nvm_buffer = devm_kzalloc(dev, CUSTOMER_USE_OTP_SIZE, GFP_KERNEL);
-	if (!nvm->nvm_buffer)
-		return -ENOMEM;
-
-	ret = ov2740_load_otp_data(client, nvm);
-	if (ret)
-		dev_err(dev, "failed to load OTP data, ret %d\n", ret);
-
-	return ret;
+	return 0;
 }
 
 static int ov2740_probe(struct i2c_client *client)
@@ -1107,7 +1109,7 @@ static int ov2740_probe(struct i2c_client *client)
 
 	ret = ov2740_register_nvmem(client);
 	if (ret)
-		dev_err(&client->dev, "register nvmem failed, ret %d\n", ret);
+		dev_warn(&client->dev, "register nvmem failed, ret %d\n", ret);
 
 	/*
 	 * Device is already turned on by i2c-core with ACPI domain PM.
Signature · 1 line
2.7.4
Reviewed-by on v1 1/1
#1 lore raw
Quoted 9 lines · Bingbu Cao

The OTP data was not ready after registered as nvmem device, it is risky as the nvmem read may happen once the device exists, this patch get the OTP data ready before registering the nvmem device. OTP data missing should not break the normal camera sensor probe, so use a warning instead of an error message.

Looks good to me,

	-ss